rendered paste body[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
[ 0.000000] BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3ff30 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003ff30000 (usable)
[ 0.000000] modified: 000000003ff30000 - 000000003ff40000 (ACPI data)
[ 0.000000] modified: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] modified: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378ba000 - 37fef1e4
[ 0.000000] Allocated new RAMDISK: 0087d000 - 00fb21e4
[ 0.000000] Move RAMDISK from 00000000378ba000 - 0000000037fef1e3 to 0087d000 - 00fb21e3
[ 0.000000] ACPI: RSDP 000FA850, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FF30000, 0030 (r1 A M I OEMRSDT 6000516 MSFT 97)
[ 0.000000] ACPI: FACP 3FF30200, 0081 (r1 A M I OEMFACP 6000516 MSFT 97)
[ 0.000000] ACPI: DSDT 3FF303E0, 3755 (r1 K8V__ K8V__088 88 MSFT 100000D)
[ 0.000000] ACPI: FACS 3FF40000, 0040
[ 0.000000] ACPI: APIC 3FF30390, 004A (r1 A M I OEMAPIC 6000516 MSFT 97)
[ 0.000000] ACPI: OEMB 3FF40040, 003F (r1 A M I OEMBIOS 6000516 MSFT 97)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 139MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac]
[ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [000087d000 - 0000fb21e4] NEW RAMDISK ==> [000087d000 - 0000fb21e4]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003ff30
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ff30
[ 0.000000] On node 0 totalpages: 261823
[ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 279 pages used for memmap
[ 0.000000] HighMem zone: 35355 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259776
[ 0.000000] Kernel command line: root=UUID=5d3ae6ac-6654-4ac2-918b-b1795e0d47db ro
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2002.483 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 5238400 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 1017728k/1047744k available (4115k kernel code, 29244k reserved, 2199k data, 532k init, 142536k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB)
[ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 4004.96 BogoMIPS (lpj=8009932)
[ 0.004153] Security Framework initialized
[ 0.004222] SELinux: Disabled at boot.
[ 0.004306] AppArmor: AppArmor initialized
[ 0.004374] Mount-cache hash table entries: 512
[ 0.004561] Initializing cgroup subsys ns
[ 0.004625] Initializing cgroup subsys cpuacct
[ 0.004688] Initializing cgroup subsys memory
[ 0.004753] Initializing cgroup subsys freezer
[ 0.004826] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004893] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004967] Checking 'hlt' instruction... OK.
[ 0.020628] SMP alternatives: switching to UP code
[ 0.136362] Freeing SMP alternatives: 18k freed
[ 0.136427] ACPI: Core revision 20080926
[ 0.137595] ACPI: Checking initramfs for custom DSDT
[ 0.419054] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.458812] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 08
[ 0.460001] Brought up 1 CPUs
[ 0.460001] Total of 1 processors activated (4004.96 BogoMIPS).
[ 0.460001] CPU0 attaching NULL sched-domain.
[ 0.460001] net_namespace: 776 bytes
[ 0.460001] Booting paravirtualized kernel on bare hardware
[ 0.460001] Time: 18:49:45 Date: 09/28/09
[ 0.460001] regulator: core version 0.5
[ 0.460001] NET: Registered protocol family 16
[ 0.460001] EISA bus registered
[ 0.460001] ACPI: bus type pci registered
[ 0.460001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.460001] PCI: Using configuration type 1 for base access
[ 0.460001] ACPI: EC: Look up EC in DSDT
[ 0.464746] ACPI: Interpreter enabled
[ 0.464810] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.465115] ACPI: Using IOAPIC for interrupt routing
[ 0.471042] ACPI: No dock devices found.
[ 0.471113] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.471228] pci 0000:00:00.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff]
[ 0.471288] pci 0000:00:01.0: supports D1
[ 0.471319] pci 0000:00:07.0: reg 10 32bit mmio: [0xfdd00000-0xfdd007ff]
[ 0.471325] pci 0000:00:07.0: reg 14 io port: [0xd800-0xd87f]
[ 0.471351] pci 0000:00:07.0: supports D2
[ 0.471353] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold
[ 0.471420] pci 0000:00:07.0: PME# disabled
[ 0.471506] pci 0000:00:08.0: reg 10 io port: [0xe800-0xe83f]
[ 0.471512] pci 0000:00:08.0: reg 14 io port: [0xe400-0xe40f]
[ 0.471518] pci 0000:00:08.0: reg 18 io port: [0xe000-0xe07f]
[ 0.471523] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfdf00000-0xfdf00fff]
[ 0.471529] pci 0000:00:08.0: reg 20 32bit mmio: [0xfde00000-0xfde1ffff]
[ 0.471544] pci 0000:00:08.0: supports D1
[ 0.471576] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfdc00000-0xfdc03fff]
[ 0.471582] pci 0000:00:0a.0: reg 14 io port: [0xd400-0xd4ff]
[ 0.471607] pci 0000:00:0a.0: supports D1 D2
[ 0.471609] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.471676] pci 0000:00:0a.0: PME# disabled
[ 0.471765] pci 0000:00:0d.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.471794] pci 0000:00:0d.0: supports D1 D2
[ 0.471823] pci 0000:00:0f.0: reg 10 io port: [0xc800-0xc807]
[ 0.471829] pci 0000:00:0f.0: reg 14 io port: [0xc400-0xc403]
[ 0.471834] pci 0000:00:0f.0: reg 18 io port: [0xc000-0xc007]
[ 0.471840] pci 0000:00:0f.0: reg 1c io port: [0xb800-0xb803]
[ 0.471846] pci 0000:00:0f.0: reg 20 io port: [0xb400-0xb40f]
[ 0.471852] pci 0000:00:0f.0: reg 24 io port: [0xb000-0xb0ff]
[ 0.471902] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.471960] pci 0000:00:10.0: reg 20 io port: [0xbc00-0xbc1f]
[ 0.471975] pci 0000:00:10.0: supports D1 D2
[ 0.471977] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.472005] pci 0000:00:10.0: PME# disabled
[ 0.472103] pci 0000:00:10.1: reg 20 io port: [0xcc00-0xcc1f]
[ 0.472118] pci 0000:00:10.1: supports D1 D2
[ 0.472120] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.472187] pci 0000:00:10.1: PME# disabled
[ 0.472285] pci 0000:00:10.2: reg 20 io port: [0xdc00-0xdc1f]
[ 0.472299] pci 0000:00:10.2: supports D1 D2
[ 0.472301] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.472368] pci 0000:00:10.2: PME# disabled
[ 0.472466] pci 0000:00:10.3: reg 20 io port: [0xec00-0xec1f]
[ 0.472480] pci 0000:00:10.3: supports D1 D2
[ 0.472482] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.472549] pci 0000:00:10.3: PME# disabled
[ 0.472634] pci 0000:00:10.4: reg 10 32bit mmio: [0xfdb00000-0xfdb000ff]
[ 0.472662] pci 0000:00:10.4: supports D1 D2
[ 0.472664] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.472731] pci 0000:00:10.4: PME# disabled
[ 0.472842] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.472910] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[ 0.473009] pci 0000:00:11.5: reg 10 io port: [0x1000-0x10ff]
[ 0.473038] pci 0000:00:11.5: supports D1 D2
[ 0.473064] pci 0000:00:11.6: reg 10 io port: [0x00-0xff]
[ 0.473168] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.473172] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
[ 0.473176] pci 0000:01:00.0: reg 18 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.473185] pci 0000:01:00.0: reg 30 32bit mmio: [0xfd400000-0xfd41ffff]
[ 0.473211] pci 0000:00:01.0: bridge 32bit mmio: [0xf9300000-0xfd4fffff]
[ 0.473215] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd1200000-0xf11fffff]
[ 0.473221] bus 00 -> node 0
[ 0.473226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.479109] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 0.479722] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 14 15)
[ 0.480333] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 14 15)
[ 0.480945] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.481661] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.482376] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.483091] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.483807] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.484531] ACPI: WMI: Mapper loaded
[ 0.484721] SCSI subsystem initialized
[ 0.484815] libata version 3.00 loaded.
[ 0.484852] usbcore: registered new interface driver usbfs
[ 0.484927] usbcore: registered new interface driver hub
[ 0.485012] usbcore: registered new device driver usb
[ 0.485166] PCI: Using ACPI for IRQ routing
[ 0.486215] Bluetooth: Core ver 2.13
[ 0.486215] NET: Registered protocol family 31
[ 0.486215] Bluetooth: HCI device and connection manager initialized
[ 0.486215] Bluetooth: HCI socket layer initialized
[ 0.486215] NET: Registered protocol family 8
[ 0.486215] NET: Registered protocol family 20
[ 0.486215] NetLabel: Initializing
[ 0.486215] NetLabel: domain hash size = 128
[ 0.486215] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.486215] NetLabel: unlabeled traffic allowed by default
[ 0.486215] AppArmor: AppArmor Filesystem Enabled
[ 0.486215] pnp: PnP ACPI init
[ 0.486215] ACPI: bus type pnp registered
[ 0.488875] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.488954] pnp 00:08: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.489033] pnp 00:08: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.489112] pnp 00:08: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.489191] pnp 00:08: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.489270] pnp 00:08: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.489349] pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.489428] pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.489507] pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.489586] pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.489664] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.489743] pnp 00:08: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.489822] pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.491520] pnp: PnP ACPI: found 13 devices
[ 0.491582] ACPI: ACPI bus type pnp unregistered
[ 0.491646] PnPBIOS: Disabled by ACPI PNP
[ 0.491716] system 00:08: ioport range 0x295-0x296 has been reserved
[ 0.491782] system 00:08: ioport range 0x3e1-0x3e7 has been reserved
[ 0.491848] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.491913] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.491979] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.492053] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.492120] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.492187] system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.492257] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.492323] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
[ 0.492390] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.492456] system 00:0c: iomem range 0x100000-0x3ffeffff could not be reserved
[ 0.527201] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.527266] pci 0000:00:01.0: IO window: disabled
[ 0.527331] pci 0000:00:01.0: MEM window: 0xf9300000-0xfd4fffff
[ 0.527397] pci 0000:00:01.0: PREFETCH window: 0x000000d1200000-0x000000f11fffff
[ 0.527483] pci 0000:00:01.0: setting latency timer to 64
[ 0.527487] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.527550] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.527614] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.527676] bus: 01 index 1 mmio: [0xf9300000-0xfd4fffff]
[ 0.527740] bus: 01 index 2 mmio: [0xd1200000-0xf11fffff]
[ 0.527804] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.527871] NET: Registered protocol family 2
[ 0.528031] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.528385] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.529253] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.529722] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.529788] TCP reno registered
[ 0.529939] NET: Registered protocol family 1
[ 0.530127] checking if image is initramfs... it is
[ 1.028058] Switched to high resolution mode on CPU 0
[ 1.112728] Freeing initrd memory: 7380k freed
[ 1.112879] cpufreq: No nForce2 chipset.
[ 1.113060] audit: initializing netlink socket (disabled)
[ 1.113137] type=2000 audit(1254163785.112:1): initialized
[ 1.120945] highmem bounce pool size: 64 pages
[ 1.121011] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.122185] VFS: Disk quotas dquot_6.5.1
[ 1.122294] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.122873] fuse init (API version 7.10)
[ 1.123007] msgmni has been set to 1724
[ 1.123220] alg: No test for stdrng (krng)
[ 1.123291] io scheduler noop registered
[ 1.123353] io scheduler anticipatory registered
[ 1.123415] io scheduler deadline registered
[ 1.123489] io scheduler cfq registered (default)
[ 1.123560] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.148031] pci 0000:01:00.0: Boot video device
[ 1.151127] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.151196] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.151363] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.151440] ACPI: Power Button (FF) [PWRF]
[ 1.151540] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.151623] ACPI: Power Button (CM) [PWRB]
[ 1.151719] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.151800] ACPI: Sleep Button (CM) [SLPB]
[ 1.151968] ACPI: processor limited to max C-state 1
[ 1.152057] processor ACPI_CPU:00: registered as cooling_device0
[ 1.154095] isapnp: Scanning for PnP cards...
[ 1.507555] isapnp: No Plug & Play device found
[ 1.508546] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.508685] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.508823] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.509138] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.509303] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.509968] brd: module loaded
[ 1.510294] loop: module loaded
[ 1.510412] Fixed MDIO Bus: probed
[ 1.510478] PPP generic driver version 2.4.2
[ 1.510585] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.510682] Driver 'sd' needs updating - please use bus_type methods
[ 1.510753] Driver 'sr' needs updating - please use bus_type methods
[ 1.510890] sata_promise 0000:00:08.0: version 2.12
[ 1.510906] sata_promise 0000:00:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.524103] scsi0 : sata_promise
[ 1.524227] scsi1 : sata_promise
[ 1.524335] scsi2 : sata_promise
[ 1.524428] ata1: SATA max UDMA/133 mmio m4096@0xfdf00000 ata 0xfdf00200 irq 18
[ 1.524505] ata2: SATA max UDMA/133 mmio m4096@0xfdf00000 ata 0xfdf00280 irq 18
[ 1.524582] ata3: PATA max UDMA/133 mmio m4096@0xfdf00000 ata 0xfdf00300 irq 18
[ 1.844020] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.164019] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.320094] sata_via 0000:00:0f.0: version 2.4
[ 2.320102] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.320206] sata_via 0000:00:0f.0: routed to hard irq line 5
[ 2.320327] scsi3 : sata_via
[ 2.320432] scsi4 : sata_via
[ 2.320522] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb400 irq 20
[ 2.320589] ata5: SATA max UDMA/133 cmd 0xc000 ctl 0xb800 bmdma 0xb408 irq 20
[ 2.524016] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.736013] ata5: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.747017] pata_via 0000:00:0f.1: version 0.3.3
[ 2.747025] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.747230] scsi5 : pata_via
[ 2.747333] scsi6 : pata_via
[ 2.748786] ata6: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 2.748853] ata7: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 2.912489] ata6.00: ATA-6: WDC WD3200JB-00KFA0, 08.05J08, max UDMA/100
[ 2.912555] ata6.00: 625142448 sectors, multi 16: LBA48
[ 2.928351] ata6.00: configured for UDMA/100
[ 3.095252] scsi 5:0:0:0: Direct-Access ATA WDC WD3200JB-00K 08.0 PQ: 0 ANSI: 5
[ 3.095405] sd 5:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.095495] sd 5:0:0:0: [sda] Write Protect is off
[ 3.095559] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.095580] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.095707] sd 5:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.095794] sd 5:0:0:0: [sda] Write Protect is off
[ 3.095858] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.095878] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.095959] sda: sda1 sda2 < sda5 >
[ 3.136037] sd 5:0:0:0: [sda] Attached SCSI disk
[ 3.136136] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 3.136334] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.136413] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.136493] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 3.136613] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 3.136743] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdb00000
[ 3.148007] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 3.148138] usb usb1: configuration #1 chosen from 1 choice
[ 3.148230] hub 1-0:1.0: USB hub found
[ 3.148299] hub 1-0:1.0: 8 ports detected
[ 3.148450] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.148527] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.148615] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.148684] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 3.148784] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 3.148877] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000bc00
[ 3.149920] usb usb2: configuration #1 chosen from 1 choice
[ 3.150005] hub 2-0:1.0: USB hub found
[ 3.150072] hub 2-0:1.0: 2 ports detected
[ 3.150210] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.150279] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 3.150376] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 3.150468] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000cc00
[ 3.150597] usb usb3: configuration #1 chosen from 1 choice
[ 3.150681] hub 3-0:1.0: USB hub found
[ 3.150749] hub 3-0:1.0: 2 ports detected
[ 3.150878] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.150948] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 3.151044] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 3.151135] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
[ 3.151268] usb usb4: configuration #1 chosen from 1 choice
[ 3.151352] hub 4-0:1.0: USB hub found
[ 3.151419] hub 4-0:1.0: 2 ports detected
[ 3.151547] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.151617] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 3.151723] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 3.151815] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00
[ 3.151945] usb usb5: configuration #1 chosen from 1 choice
[ 3.152036] hub 5-0:1.0: USB hub found
[ 3.152102] hub 5-0:1.0: 2 ports detected
[ 3.152271] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.152336] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.152521] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.152655] mice: PS/2 mouse device common for all mice
[ 3.152842] rtc_cmos 00:02: RTC can wake from S4
[ 3.152930] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.153043] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 3.153161] device-mapper: uevent: version 1.0.3
[ 3.153308] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.153431] device-mapper: multipath: version 1.0.5 loaded
[ 3.153497] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.153622] EISA: Probing bus 0 at eisa.0
[ 3.153689] Cannot allocate resource for EISA slot 1
[ 3.153776] EISA: Detected 0 cards.
[ 3.153859] cpuidle: using governor ladder
[ 3.153922] cpuidle: using governor menu
[ 3.154431] TCP cubic registered
[ 3.154573] NET: Registered protocol family 10
[ 3.154991] lo: Disabled Privacy Extensions
[ 3.155332] NET: Registered protocol family 17
[ 3.155406] Bluetooth: L2CAP ver 2.11
[ 3.155467] Bluetooth: L2CAP socket layer initialized
[ 3.155531] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.155594] Bluetooth: SCO socket layer initialized
[ 3.155675] Bluetooth: RFCOMM socket layer initialized
[ 3.155744] Bluetooth: RFCOMM TTY layer initialized
[ 3.155807] Bluetooth: RFCOMM ver 1.10
[ 3.155885] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[ 3.157019] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 3.157095] Using IPI No-Shortcut mode
[ 3.157218] registered taskstats version 1
[ 3.157387] Magic number: 9:819:848
[ 3.157527] rtc_cmos 00:02: setting system clock to 2009-09-28 18:49:47 UTC (1254163787)
[ 3.157605] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.157670] EDD information not available.
[ 3.158162] Freeing unused kernel memory: 532k freed
[ 3.158348] Write protecting the kernel text: 4116k
[ 3.158451] Write protecting the kernel read-only data: 1528k
[ 3.192633] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.352711] Floppy drive(s): fd0 is 1.44M
[ 3.372063] FDC 0 is a post-1991 82077
[ 3.392884] ohci1394 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.445730] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fdd00000-fdd007ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.458193] skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.458271] skge 0000:00:0a.0: PCI: Disallowing DAC for device
[ 3.458377] skge 1.13 addr 0xfdc00000 irq 17 chip Yukon rev 1
[ 3.459038] skge eth0: addr 00:0c:6e:bd:e6:70
[ 3.688068] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 3.787523] PM: Starting manual resume from disk
[ 3.787589] PM: Resume from partition 8:5
[ 3.787590] PM: Checking hibernation image.
[ 3.787765] PM: Resume from disk failed.
[ 3.793891] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 3.793959] EXT3-fs: write access will be enabled during recovery.
[ 3.865247] usb 3-2: configuration #1 chosen from 1 choice
[ 3.873156] usbcore: registered new interface driver hiddev
[ 3.886741] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input5
[ 3.887018] generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2/input0
[ 3.887115] usbcore: registered new interface driver usbhid
[ 3.887180] usbhid: v2.6:USB HID core driver
[ 4.273099] kjournald starting. Commit interval 5 seconds
[ 4.273178] EXT3-fs: recovery complete.
[ 4.273745] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.724086] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000353433]
[ 10.074106] udev: starting version 141
[ 10.522689] Linux agpgart interface v0.103
[ 10.706857] agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188]
[ 10.709988] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[ 10.761321] parport_pc 00:07: reported by Plug and Play ACPI
[ 10.761426] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 10.813978] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.250604] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 11.258621] ppdev: user-space parallel port driver
[ 11.439501] nvidia: module license 'NVIDIA' taints kernel.
[ 11.699879] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.700994] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 12.074520] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
[ 12.074597] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 12.832012] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[ 13.336225] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
[ 13.336301] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[ 13.336817] VIA 82xx Audio 0000:00:11.5: enabling device (0000 -> 0001)
[ 13.336887] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 13.337108] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 13.850935] codec_read: codec 0 is not valid [0xfe0000]
[ 13.857727] codec_read: codec 0 is not valid [0xfe0000]
[ 13.864543] codec_read: codec 0 is not valid [0xfe0000]
[ 13.871309] codec_read: codec 0 is not valid [0xfe0000]
[ 13.884173] C-Media PCI 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.033467] lp0: using parport0 (interrupt-driven).
[ 14.126595] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 14.558180] EXT3 FS on sda1, internal journal
[ 14.932737] type=1505 audit(1254163799.274:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1944
[ 14.985640] type=1505 audit(1254163799.326:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1948
[ 14.985788] type=1505 audit(1254163799.326:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1948
[ 14.985841] type=1505 audit(1254163799.326:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1948
[ 14.985892] type=1505 audit(1254163799.326:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1948
[ 15.138564] type=1505 audit(1254163799.478:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1953
[ 15.138779] type=1505 audit(1254163799.478:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1953
[ 15.169853] type=1505 audit(1254163799.510:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1957
[ 15.495416] skge eth0: enabling interface
[ 15.498709] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.182290] skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 17.182495] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.370907] agpgart-amd64 0000:00:00.0: AGP 3.5 bridge
[ 21.370920] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 21.370991] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 27.308006] eth0: no IPv6 routers present
[ 122.343198] PM: Syncing filesystems ... done.
[ 122.346111] PM: Preparing system for mem sleep
[ 122.346116] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 122.346802] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 122.346839] PM: Entering mem sleep
[ 122.346852] Suspending console(s) (use no_console_suspend to debug)
[ 122.832040] sd 5:0:0:0: [sda] Synchronizing SCSI cache
[ 122.832198] sd 5:0:0:0: [sda] Stopping disk
[ 123.228359] serial 00:0b: disabled
[ 123.228573] serial 00:0a: disabled
[ 123.228785] parport_pc 00:07: disabled
[ 123.228810] NVRM: RmPowerManagement: 4
[ 123.555013] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[ 123.568071] ehci_hcd 0000:00:10.4: PCI INT C disabled
[ 123.584034] uhci_hcd 0000:00:10.3: PCI INT B disabled
[ 123.600033] uhci_hcd 0000:00:10.2: PCI INT B disabled
[ 123.616033] uhci_hcd 0000:00:10.1: PCI INT A disabled
[ 123.632033] uhci_hcd 0000:00:10.0: PCI INT A disabled
[ 123.648080] pata_via 0000:00:0f.1: PCI INT A disabled
[ 123.664055] sata_via 0000:00:0f.0: PCI INT B disabled
[ 123.680040] C-Media PCI 0000:00:0d.0: PCI INT A disabled
[ 123.680067] ACPI handle has no context!
[ 123.696032] skge eth0: disabling interface
[ 123.698901] ACPI handle has no context!
[ 123.698905] ACPI handle has no context!
[ 123.717030] ACPI handle has no context!
[ 123.748024] PM: suspend devices took 1.404 seconds
[ 123.748174] ACPI: Preparing to enter system sleep state S3
[ 123.748691] Disabling non-boot CPUs ...
[ 123.748691] Back to C!
[ 123.748691] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[ 123.748691] ACPI: Waking up from system sleep state S3
[ 124.424025] agpgart-amd64 0000:00:00.0: restoring config space at offset 0x3 (was 0x800, writing 0x4000)
[ 124.424030] agpgart-amd64 0000:00:00.0: restoring config space at offset 0x1 (was 0x22300106, writing 0x32300106)
[ 124.424068] pci 0000:00:01.0: setting latency timer to 64
[ 124.492627] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fdd00000-fdd007ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 124.499744] sata_promise 0000:00:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 124.512048] skge eth0: enabling interface
[ 124.528024] C-Media PCI 0000:00:0d.0: restoring config space at offset 0x1 (was 0x2100105, writing 0x2100101)
[ 124.528035] C-Media PCI 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 124.544031] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 124.560036] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 124.576009] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 124.576048] usb usb2: root hub lost power or was reset
[ 124.592007] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 124.592045] usb usb3: root hub lost power or was reset
[ 124.608007] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 124.608044] usb usb4: root hub lost power or was reset
[ 124.624006] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 124.624043] usb usb5: root hub lost power or was reset
[ 124.640007] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 124.656021] VIA 82xx Audio 0000:00:11.5: restoring config space at offset 0x4 (was 0x1, writing 0x1001)
[ 124.656027] VIA 82xx Audio 0000:00:11.5: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[ 124.656037] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 124.656042] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 124.659427] pci 0000:00:11.6: restoring config space at offset 0x4 (was 0x1, writing 0x1401)
[ 124.659433] pci 0000:00:11.6: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100001)
[ 124.659473] NVRM: RmPowerManagement: 5
[ 124.999121] parport_pc 00:07: activated
[ 124.999969] serial 00:0a: activated
[ 125.000657] serial 00:0b: activated
[ 125.000709] sd 5:0:0:0: [sda] Starting disk
[ 126.198891] skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 129.588006] ata6: link is slow to respond, please be patient (ready=0)
[ 131.712364] ata6.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[ 131.712367] ata6.00: ACPI cmd ef/03:01:00:00:00:a0 filtered out
[ 131.712478] ata6.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[ 131.736355] ata6.00: configured for UDMA/100
[ 131.760353] ata6.00: configured for UDMA/100
[ 131.760356] ata6: EH complete
[ 131.765755] sd 5:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 131.765771] sd 5:0:0:0: [sda] Write Protect is off
[ 131.765773] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 131.765793] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 131.765816] sd 5:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 131.765828] sd 5:0:0:0: [sda] Write Protect is off
[ 131.765829] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 131.765848] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 132.340007] usb 3-2: reset low speed USB device using uhci_hcd and address 2
[ 132.651016] PM: resume devices took 8.240 seconds
[ 132.651022] ------------[ cut here ]------------
[ 132.651024] WARNING: at /build/buildd/linux-2.6.28/kernel/power/main.c:177 suspend_test_finish+0x80/0x90()
[ 132.651026] Component: resume devices
[ 132.651027] Modules linked in: binfmt_misc video output input_polldev lp snd_cmipci snd_via82xx snd_via82xx_modem snd_ac97_codec gameport snd_opl3_lib ac97_bus snd_hwdep snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_mpu401_uart snd_seq_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_seq_device nvidia(P) ppdev pcspkr i2c_viapro snd_timer snd_page_alloc snd shpchp parport_pc parport k8temp amd64_agp agpgart soundcore usbhid skge ohci1394 ieee1394 floppy fbcon tileblit font bitblit softcursor
[ 132.651054] Pid: 3449, comm: pm-suspend Tainted: P 2.6.28-15-generic #49-Ubuntu
[ 132.651056] Call Trace:
[ 132.651061] [<c0139ba0>] warn_slowpath+0x60/0x80
[ 132.651064] [<c015393a>] ? down_trylock+0x2a/0x40
[ 132.651068] [<c013a1fd>] ? try_acquire_console_sem+0xd/0x30
[ 132.651072] [<c02c7c50>] ? kobject_put+0x20/0x50
[ 132.651076] [<c04fdfc6>] ? printk+0x18/0x1a
[ 132.651079] [<c01651e0>] suspend_test_finish+0x80/0x90
[ 132.651082] [<c01652b6>] suspend_devices_and_enter+0xc6/0x160
[ 132.651085] [<c04fdfc6>] ? printk+0x18/0x1a
[ 132.651088] [<c0165539>] enter_state+0xc9/0x100
[ 132.651091] [<c01655ed>] state_store+0x7d/0xc0
[ 132.651094] [<c0165570>] ? state_store+0x0/0xc0
[ 132.651097] [<c02c7b14>] kobj_attr_store+0x24/0x30
[ 132.651100] [<c020af42>] sysfs_write_file+0x92/0xf0
[ 132.651104] [<c01bdde8>] vfs_write+0x98/0x110
[ 132.651106] [<c020aeb0>] ? sysfs_write_file+0x0/0xf0
[ 132.651109] [<c01bdf1d>] sys_write+0x3d/0x70
[ 132.651112] [<c0103f6b>] sysenter_do_call+0x12/0x2f
[ 132.651115] ---[ end trace 4d807663210e5bfe ]---
[ 132.651133] PM: Finishing wakeup.
[ 132.651134] Restarting tasks ... done.