NetBSD 3.0 (GENERIC) #0: Sun Dec 18 21:51:37 UTC 2005
builds@works.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/amd64/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 447 MB
avail memory = 420 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) ( )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Mobile AMD Athlon(tm) 64 Processor 3000+, 1804.25 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 1 MB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 16 page colors
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0204 (rev. 0x00)
pchb1 at pci0 dev 0 function 1
pchb1: VIA Technologies product 0x1204 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: VIA Technologies product 0x2204 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: VIA Technologies product 0x3204 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: VIA Technologies product 0x4204 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: VIA Technologies product 0x7204 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: VIA Technologies product 0x3108 (rev. 0x01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
rtk0 at pci0 dev 8 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at ioapic0 pin 20 (irq 5)
rtk0: Ethernet address 00:90:f5:3e:0c:7f
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ENE Technology CB1410 CardBus Controller (CardBus bridge, revision 0x01) at pci0 dev 12 function 0 not configured
Winbond Electronics product 0x8481 (miscellaneous mass storage, revision 0x01) at pci0 dev 14 function 0 not configured
Winbond Electronics product 0x8482 (miscellaneous mass storage, revision 0x01) at pci0 dev 14 function 1 not configured
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x80)
uhci0: interrupting at ioapic0 pin 16 (irq 9)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x80)
uhci1: interrupting at ioapic0 pin 17 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x80)
uhci2: interrupting at ioapic0 pin 18 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
VIA Technologies VT8237 EHCI USB Controller (USB serial bus, interface 0x20, revision 0x82) at pci0 dev 16 function 3 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8235 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at viaide0 channel 1
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x50)
auvia0: interrupting at ioapic0 pin 18 (irq 10)
auvia0: ac97: Avance Logic ALC202 codec; headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
auvia0: ac97: ext id 607<AC97_22,AMAP,SPDIF,DRA,VRA>
audio0 at auvia0: full duplex, mmap, independent
VIA Technologies VT82C686A MC-97 Modem Controller (miscellaneous communications, revision 0x80) at pci0 dev 17 function 6 not configured
pchb6 at pci0 dev 24 function 0
pchb6: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb7 at pci0 dev 24 function 1
pchb7: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb8 at pci0 dev 24 function 2
pchb8: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb9 at pci0 dev 24 function 3
pchb9: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
ioapic0: enabling
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <WDC WD400UE-00HCT0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SONY CD-RW/DVD-ROM CRX830E, , JYK3> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)