rendered paste bodysmartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SV4002H
Serial Number: 0439J1FRC89753
Firmware Version: QP100-09
User Capacity: 40,060,403,712 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 1
Local Time is: Sat Sep 19 01:36:55 2009 CDT
==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1560) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 8) minutes.
SMART Attributes Data Structure revision number: 9
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 243
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 937
5 Reallocated_Sector_Ct 0x0033 253 253 009 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 3683754
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 353
194 Temperature_Celsius 0x0022 148 127 000 Old_age Always - 30
197 Current_Pending_Sector 0x0033 253 253 009 Pre-fail Always - 0
198 Offline_Uncorrectable 0x0031 253 253 009 Pre-fail Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 139
SMART Error Log Version: 1
Warning: ATA error count 198 inconsistent with error log pointer 1
ATA Error Count: 198 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 198 occurred at disk power-on lifetime: 30692 hours (1278 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 88 08 ff 05 e0 e0 at LBA = 0x00e005ff = 14681599
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 08 ff 05 e0 e0 00 02:14:41.000 READ SECTOR(S)
30 00 08 3f 00 00 e0 00 02:14:41.000 WRITE SECTOR(S)
30 00 08 3f 00 00 e0 00 02:14:41.000 WRITE SECTOR(S)
30 00 08 3f 00 00 e0 00 02:14:41.000 WRITE SECTOR(S)
20 00 08 ff 05 e0 e0 00 01:38:05.000 READ SECTOR(S)
Error 197 occurred at disk power-on lifetime: 30692 hours (1278 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 88 08 ff 05 e0 e0 at LBA = 0x00e005ff = 14681599
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 08 ff 05 e0 e0 00 02:14:40.000 READ SECTOR(S)
30 00 08 4f 7c fe e0 00 02:14:40.000 WRITE SECTOR(S)
30 00 40 0f 7c fe e0 00 02:14:40.000 WRITE SECTOR(S)
30 00 10 8f ee 21 e1 00 02:14:40.000 WRITE SECTOR(S)
30 00 08 7f ee 21 e1 00 02:14:40.000 WRITE SECTOR(S)
Error 196 occurred at disk power-on lifetime: 30692 hours (1278 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 88 08 ff 05 e0 e0 at LBA = 0x00e005ff = 14681599
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 08 ff 05 e0 e0 00 02:05:14.000 READ SECTOR(S)
30 00 08 3f 00 00 e0 00 02:05:14.000 WRITE SECTOR(S)
30 00 08 3f 00 00 e0 00 02:05:14.000 WRITE SECTOR(S)
30 00 08 3f 00 00 e0 00 02:05:14.000 WRITE SECTOR(S)
20 00 08 ff 05 e0 e0 00 49d+15:55:49.296 READ SECTOR(S)
Error 195 occurred at disk power-on lifetime: 30692 hours (1278 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 88 08 ff 05 e0 e0 at LBA = 0x00e005ff = 14681599
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 08 ff 05 e0 e0 00 02:05:13.000 READ SECTOR(S)
20 00 08 0f 04 e4 e0 00 02:05:13.000 READ SECTOR(S)
20 00 08 07 04 e4 e0 00 02:05:13.000 READ SECTOR(S)
20 00 08 8f 27 23 e1 00 02:05:13.000 READ SECTOR(S)
20 00 08 77 45 23 e1 00 02:05:13.000 READ SECTOR(S)
Error 194 occurred at disk power-on lifetime: 30691 hours (1278 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 88 08 ff 05 e0 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d5 01 01 4f c2 e0 00 08:25:58.000 SMART READ LOG
b0 d1 01 01 4f c2 e0 00 08:25:58.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
b0 d0 01 00 4f c2 e0 00 08:25:58.000 SMART READ DATA
30 00 08 ef 3a fd e0 00 08:25:58.000 WRITE SECTOR(S)
b0 da 00 00 4f c2 e0 00 08:25:58.000 SMART RETURN STATUS
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 30697 -
Device does not support Selective Self Tests/Logging