rendered paste body[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6800 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003ffffc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffffc00 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e6800 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] modified: 000000003fff0000 - 000000003ffffc00 (ACPI data)
[ 0.000000] modified: 000000003ffffc00 - 0000000040000000 (ACPI NVS)
[ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378be000 - 37fef95f
[ 0.000000] Allocated new RAMDISK: 0087d000 - 00fae95f
[ 0.000000] Move RAMDISK from 00000000378be000 - 0000000037fef95e to 0087d000 - 00fae95e
[ 0.000000] ACPI: RSDP 000F7850, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3FFFB32E, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3FFFFB14, 0074 (r1 HP Moorea 6040000 PTL 1)
[ 0.000000] ACPI: DSDT 3FFFB35E, 47B6 (r1 HP Moorea 6040000 MSFT 100000B)
[ 0.000000] ACPI: FACS 3FFFFFC0, 0040
[ 0.000000] ACPI: APIC 3FFFFB88, 0050 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3FFFFBD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 139MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac]
[ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [000087d000 - 0000fae95f] NEW RAMDISK ==> [000087d000 - 0000fae95f]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 280 pages used for memmap
[ 0.000000] HighMem zone: 35546 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x0c] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
[ 0.000000] PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bffc0000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: root=UUID=b8f5ee71-e0b9-4e9b-b7c9-77a859f21bd0 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1299.994 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 5242240 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 1018528k/1048512k available (4115k kernel code, 29232k reserved, 2199k data, 532k init, 143304k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB)
[ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004029] Calibrating delay loop (skipped), value calculated using timer frequency.. 2599.98 BogoMIPS (lpj=5199976)
[ 0.004080] Security Framework initialized
[ 0.004103] SELinux: Disabled at boot.
[ 0.004190] AppArmor: AppArmor initialized
[ 0.004209] Mount-cache hash table entries: 512
[ 0.004581] Initializing cgroup subsys ns
[ 0.004590] Initializing cgroup subsys cpuacct
[ 0.004594] Initializing cgroup subsys memory
[ 0.004605] Initializing cgroup subsys freezer
[ 0.004633] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004638] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004680] Checking 'hlt' instruction... OK.
[ 0.020154] SMP alternatives: switching to UP code
[ 0.217233] Freeing SMP alternatives: 18k freed
[ 0.217244] ACPI: Core revision 20080926
[ 0.222083] ACPI: Checking initramfs for custom DSDT
[ 0.697700] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.738507] CPU0: AMD Athlon(tm) Processor stepping 02
[ 0.740002] Brought up 1 CPUs
[ 0.740002] Total of 1 processors activated (2599.98 BogoMIPS).
[ 0.740002] CPU0 attaching NULL sched-domain.
[ 0.740002] net_namespace: 776 bytes
[ 0.740002] Booting paravirtualized kernel on bare hardware
[ 0.740002] Time: 13:26:18 Date: 09/17/09
[ 0.740002] regulator: core version 0.5
[ 0.740002] NET: Registered protocol family 16
[ 0.740002] EISA bus registered
[ 0.740002] ACPI: bus type pci registered
[ 0.746831] PCI: PCI BIOS revision 2.10 entry at 0xfd7ee, last bus=1
[ 0.746835] PCI: Using configuration type 1 for base access
[ 0.749109] ACPI: EC: Look up EC in DSDT
[ 0.757158] ACPI: Interpreter enabled
[ 0.757167] ACPI: (supports S0 S1 S4 S5)
[ 0.757196] ACPI: Using IOAPIC for interrupt routing
[ 0.762392] ACPI: No dock devices found.
[ 0.762412] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.762511] pci 0000:00:00.0: reg 10 32bit mmio: [0xd1000000-0xd11fffff]
[ 0.762583] pci 0000:00:01.0: supports D1
[ 0.762689] pci 0000:00:07.1: reg 20 io port: [0x1400-0x140f]
[ 0.762750] pci 0000:00:07.2: reg 20 io port: [0x1420-0x143f]
[ 0.762808] pci 0000:00:07.3: reg 20 io port: [0x1440-0x145f]
[ 0.762886] pci 0000:00:07.4: quirk: region 6800-687f claimed by vt82c686 HW-mon
[ 0.762891] pci 0000:00:07.4: quirk: region 0400-040f claimed by vt82c686 SMB
[ 0.762934] pci 0000:00:0d.0: reg 10 32bit mmio: [0xd0000000-0xd0ffffff]
[ 0.762942] pci 0000:00:0d.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
[ 0.762964] pci 0000:00:0d.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.763006] pci 0000:00:0f.0: reg 10 io port: [0x1460-0x147f]
[ 0.763037] pci 0000:00:0f.0: supports D1 D2
[ 0.763107] bus 00 -> node 0
[ 0.763118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.763554] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT]
[ 0.766678] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.766889] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[ 0.767116] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.767340] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 0.767651] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 9 14 15) *0
[ 0.767958] ACPI: PCI Interrupt Link [LNKS] (IRQs 3 4 5 6 7 10 14 15) *0
[ 0.768228] ACPI: WMI: Mapper loaded
[ 0.768742] SCSI subsystem initialized
[ 0.768846] libata version 3.00 loaded.
[ 0.768954] usbcore: registered new interface driver usbfs
[ 0.768989] usbcore: registered new interface driver hub
[ 0.769051] usbcore: registered new device driver usb
[ 0.769283] PCI: Using ACPI for IRQ routing
[ 0.769412] Bluetooth: Core ver 2.13
[ 0.769412] NET: Registered protocol family 31
[ 0.769412] Bluetooth: HCI device and connection manager initialized
[ 0.769412] Bluetooth: HCI socket layer initialized
[ 0.769412] NET: Registered protocol family 8
[ 0.769412] NET: Registered protocol family 20
[ 0.769412] NetLabel: Initializing
[ 0.769412] NetLabel: domain hash size = 128
[ 0.769412] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.769412] NetLabel: unlabeled traffic allowed by default
[ 0.769412] AppArmor: AppArmor Filesystem Enabled
[ 0.769412] pnp: PnP ACPI init
[ 0.769412] ACPI: bus type pnp registered
[ 0.773499] pnp: PnP ACPI: found 12 devices
[ 0.773503] ACPI: ACPI bus type pnp unregistered
[ 0.773511] PnPBIOS: Disabled by ACPI PNP
[ 0.773544] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.773549] system 00:08: ioport range 0x8000-0x807f has been reserved
[ 0.773554] system 00:08: ioport range 0x6800-0x687f has been reserved
[ 0.773559] system 00:08: ioport range 0x400-0x40f has been reserved
[ 0.773565] system 00:08: iomem range 0xfffc0000-0xffffffff has been reserved
[ 0.773570] system 00:08: iomem range 0xfff80000-0xfffbffff has been reserved
[ 0.773575] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.773580] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.808450] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.808455] pci 0000:00:01.0: IO window: disabled
[ 0.808461] pci 0000:00:01.0: MEM window: disabled
[ 0.808466] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.808489] pci 0000:00:01.0: setting latency timer to 64
[ 0.808496] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.808500] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.808504] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.808507] bus: 01 index 1 mmio: [0x0-0x0]
[ 0.808510] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.808513] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.808537] NET: Registered protocol family 2
[ 0.808777] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.809552] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.813140] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.814939] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.814947] TCP reno registered
[ 0.815240] NET: Registered protocol family 1
[ 0.815597] checking if image is initramfs... it is
[ 1.312082] Switched to high resolution mode on CPU 0
[ 1.863311] Freeing initrd memory: 7366k freed
[ 1.863411] Simple Boot Flag at 0x36 set to 0x1
[ 1.863572] cpufreq: No nForce2 chipset.
[ 1.863869] audit: initializing netlink socket (disabled)
[ 1.863916] type=2000 audit(1253193978.860:1): initialized
[ 1.877582] highmem bounce pool size: 64 pages
[ 1.877595] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.880028] VFS: Disk quotas dquot_6.5.1
[ 1.880144] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.881263] fuse init (API version 7.10)
[ 1.881397] msgmni has been set to 1724
[ 1.881823] alg: No test for stdrng (krng)
[ 1.881849] io scheduler noop registered
[ 1.881853] io scheduler anticipatory registered
[ 1.881856] io scheduler deadline registered
[ 1.881882] io scheduler cfq registered (default)
[ 1.881922] pci 0000:00:00.0: Applying VIA southbridge workaround
[ 1.881930] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.881937] pci 0000:00:07.0: Enabling VIA external APIC routing
[ 1.881989] pci 0000:00:0d.0: Boot video device
[ 1.885985] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.886001] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.886266] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.886272] ACPI: Power Button (FF) [PWRF]
[ 1.886360] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.886365] ACPI: Power Button (CM) [PWRB]
[ 1.886669] processor ACPI_CPU:00: registered as cooling_device0
[ 1.889071] isapnp: Scanning for PnP cards...
[ 2.243289] isapnp: No Plug & Play device found
[ 2.245902] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.247264] serial 00:0a: activated
[ 2.247435] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.248261] serial 00:0b: activated
[ 2.248393] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.249737] brd: module loaded
[ 2.250341] loop: module loaded
[ 2.250502] Fixed MDIO Bus: probed
[ 2.250514] PPP generic driver version 2.4.2
[ 2.250668] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 2.250762] Driver 'sd' needs updating - please use bus_type methods
[ 2.250778] Driver 'sr' needs updating - please use bus_type methods
[ 2.251656] pata_via 0000:00:07.1: version 0.3.3
[ 2.252246] scsi0 : pata_via
[ 2.252476] scsi1 : pata_via
[ 2.253903] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1400 irq 14
[ 2.253909] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1408 irq 15
[ 2.425398] ata1.00: ATA-5: WDC WD400BB-00DEA0, 05.03E05, max UDMA/100
[ 2.425404] ata1.00: 78165360 sectors, multi 16: LBA
[ 2.425452] ata1.01: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.04, max UDMA/66
[ 2.441425] ata1.00: configured for UDMA/100
[ 2.456406] ata1.01: configured for UDMA/66
[ 2.621463] ata2.00: ATA-6: WDC WD1200AB-22DYA0, 15.05R15, max UDMA/100
[ 2.621468] ata2.00: 234441648 sectors, multi 16: LBA48
[ 2.637496] ata2.00: configured for UDMA/100
[ 2.637778] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-00DE 05.0 PQ: 0 ANSI: 5
[ 2.638001] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.638039] sd 0:0:0:0: [sda] Write Protect is off
[ 2.638044] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.638096] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.638245] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.638274] sd 0:0:0:0: [sda] Write Protect is off
[ 2.638278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.638325] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.638334] sda: sda1 sda2 < sda5 sda6 >
[ 2.678654] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.678765] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.679958] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.04 PQ: 0 ANSI: 5
[ 2.683418] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.683426] Uniform CD-ROM driver Revision: 3.20
[ 2.683617] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 2.683707] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 2.683839] scsi 1:0:0:0: Direct-Access ATA WDC WD1200AB-22D 15.0 PQ: 0 ANSI: 5
[ 2.684000] sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 2.684051] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.684055] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.684108] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.684229] sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 2.684258] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.684262] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.684311] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.684319] sdb: sdb1
[ 2.705036] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.705109] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 2.705422] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.705453] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.705475] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.706015] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 9
[ 2.706035] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKU] -> GSI 9 (level, low) -> IRQ 9
[ 2.706054] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 2.706176] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 2.706238] uhci_hcd 0000:00:07.2: irq 9, io base 0x00001420
[ 2.706453] usb usb1: configuration #1 chosen from 1 choice
[ 2.706510] hub 1-0:1.0: USB hub found
[ 2.706535] hub 1-0:1.0: 2 ports detected
[ 2.706711] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKU] -> GSI 9 (level, low) -> IRQ 9
[ 2.706722] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 2.706792] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[ 2.706816] uhci_hcd 0000:00:07.3: irq 9, io base 0x00001440
[ 2.706972] usb usb2: configuration #1 chosen from 1 choice
[ 2.707016] hub 2-0:1.0: USB hub found
[ 2.707036] hub 2-0:1.0: 2 ports detected
[ 2.707259] PNP: PS/2 Controller [PNP0303:KBC] at 0x60,0x64 irq 1
[ 2.707265] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.707411] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.707643] mice: PS/2 mouse device common for all mice
[ 2.707884] rtc_cmos 00:03: RTC can wake from S4
[ 2.707952] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.708037] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 2.708198] device-mapper: uevent: version 1.0.3
[ 2.708454] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.708583] device-mapper: multipath: version 1.0.5 loaded
[ 2.708590] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.708770] EISA: Probing bus 0 at eisa.0
[ 2.708784] Cannot allocate resource for EISA slot 1
[ 2.708808] Cannot allocate resource for EISA slot 6
[ 2.708817] Cannot allocate resource for EISA slot 8
[ 2.708820] EISA: Detected 0 cards.
[ 2.708889] cpuidle: using governor ladder
[ 2.708893] cpuidle: using governor menu
[ 2.709791] TCP cubic registered
[ 2.709957] NET: Registered protocol family 10
[ 2.710691] lo: Disabled Privacy Extensions
[ 2.711243] NET: Registered protocol family 17
[ 2.711280] Bluetooth: L2CAP ver 2.11
[ 2.711283] Bluetooth: L2CAP socket layer initialized
[ 2.711288] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.711291] Bluetooth: SCO socket layer initialized
[ 2.711366] Bluetooth: RFCOMM socket layer initialized
[ 2.711386] Bluetooth: RFCOMM TTY layer initialized
[ 2.711389] Bluetooth: RFCOMM ver 1.10
[ 2.711427] powernow-k8: Processor cpuid 642 not supported
[ 2.711480] Using IPI No-Shortcut mode
[ 2.711705] registered taskstats version 1
[ 2.711873] Magic number: 9:49:433
[ 2.712115] rtc_cmos 00:03: setting system clock to 2009-09-17 13:26:20 UTC (1253193980)
[ 2.712122] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.712126] EDD information not available.
[ 2.713815] Freeing unused kernel memory: 532k freed
[ 2.714058] Write protecting the kernel text: 4116k
[ 2.714123] Write protecting the kernel read-only data: 1528k
[ 2.748239] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.018176] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 3.187469] usb 1-1: configuration #1 chosen from 1 choice
[ 3.190307] hub 1-1:1.0: USB hub found
[ 3.192265] hub 1-1:1.0: 2 ports detected
[ 3.308071] usb 1-2: new low speed USB device using uhci_hcd and address 3
[ 3.491454] usb 1-2: configuration #1 chosen from 1 choice
[ 3.500094] FDC 0 is a post-1991 82077
[ 3.569258] usb 1-1.1: new full speed USB device using uhci_hcd and address 4
[ 3.718401] usb 1-1.1: configuration #1 chosen from 1 choice
[ 3.809230] usb 1-1.2: new full speed USB device using uhci_hcd and address 5
[ 4.158388] usb 1-1.2: configuration #1 chosen from 1 choice
[ 4.654414] usbcore: registered new interface driver hiddev
[ 4.670564] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0/input/input4
[ 4.670814] Initializing USB Mass Storage driver...
[ 4.674288] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4.675887] usbcore: registered new interface driver usb-storage
[ 4.675900] USB Mass Storage support registered.
[ 4.676168] usb-storage: device found at 4
[ 4.676172] usb-storage: waiting for device to settle before scanning
[ 4.700323] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:07.2-2/input0
[ 4.700398] usbcore: registered new interface driver usbhid
[ 4.700406] usbhid: v2.6:USB HID core driver
[ 4.804993] PM: Starting manual resume from disk
[ 4.805005] PM: Resume from partition 8:6
[ 4.805008] PM: Checking hibernation image.
[ 4.805322] PM: Resume from disk failed.
[ 4.837775] kjournald starting. Commit interval 5 seconds
[ 4.837805] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.677591] usb-storage: device scan complete
[ 9.680531] scsi 2:0:0:0: Direct-Access HP v125w PMAP PQ: 0 ANSI: 0 CCS
[ 9.685459] sd 2:0:0:0: [sdc] 7936000 512-byte hardware sectors: (4.06 GB/3.78 GiB)
[ 9.688457] sd 2:0:0:0: [sdc] Write Protect is off
[ 9.688462] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 9.688467] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 9.700453] sd 2:0:0:0: [sdc] 7936000 512-byte hardware sectors: (4.06 GB/3.78 GiB)
[ 9.703449] sd 2:0:0:0: [sdc] Write Protect is off
[ 9.703453] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 9.703457] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 9.703464] sdc: sdc1
[ 9.709764] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 9.709908] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 11.277166] udev: starting version 141
[ 11.527278] parport_pc: VIA 686A/8231 detected
[ 11.527288] parport_pc: probing current configuration
[ 11.527309] parport_pc: Current parallel port base: 0x0
[ 11.527315] parport_pc: VIA parallel port disabled in BIOS
[ 11.544923] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.556649] Linux agpgart interface v0.103
[ 11.573535] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[ 11.574736] agpgart-via 0000:00:00.0: AGP aperture is 2M @ 0xd1000000
[ 11.860272] cfg80211: Calling CRDA to update world regulatory domain
[ 12.282016] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMIO [0x400-0x407]
[ 12.282025] ACPI: Device needs an ACPI driver
[ 12.881491] nvidia: module license 'NVIDIA' taints kernel.
[ 13.231553] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.290800] nvidia 0000:00:0d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.315549] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.16 Sat Jan 24 19:42:59 PST 2009
[ 13.556411] CA0106 0000:00:0f.0: enabling device (0000 -> 0001)
[ 13.556447] CA0106 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.556547] snd-ca0106: Model 1006 Rev 00000000 Serial 10061102
[ 13.574707] phy0: Selected rate control algorithm 'pid'
[ 13.635967] Registered led device: rt73usb-phy0:radio
[ 13.636130] Registered led device: rt73usb-phy0:assoc
[ 13.636209] Registered led device: rt73usb-phy0:quality
[ 13.639066] usbcore: registered new interface driver rt73usb
[ 13.731082] ppdev: user-space parallel port driver
[ 13.824338] cfg80211: World regulatory domain updated:
[ 13.824353] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.824359] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.824364] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.824368] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.824372] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.824377] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.273589] lp: driver loaded but no devices found
[ 14.526339] Adding 1791208k swap on /dev/sda6. Priority:-1 extents:1 across:1791208k
[ 15.125711] EXT3 FS on sda5, internal journal
[ 16.771347] type=1505 audit(1253208394.555:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1956
[ 16.886635] type=1505 audit(1253208394.671:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1960
[ 16.887234] type=1505 audit(1253208394.671:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1960
[ 16.887415] type=1505 audit(1253208394.671:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1960
[ 16.887566] type=1505 audit(1253208394.671:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1960
[ 17.215072] type=1505 audit(1253208394.999:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1965
[ 17.215878] type=1505 audit(1253208394.999:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1965
[ 17.286847] type=1505 audit(1253208395.071:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1969
[ 22.572043] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.572052] Bluetooth: BNEP filters: protocol multicast
[ 22.604184] Bridge firewalling registered
[ 28.212739] rt73usb 1-1.2:1.0: firmware: requesting rt73.bin
[ 28.550797] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 88.734457] wlan0: authenticate with AP 00:16:b6:f7:7a:6b
[ 88.736950] wlan0: authenticated
[ 88.736965] wlan0: associate with AP 00:16:b6:f7:7a:6b
[ 88.759548] wlan0: RX AssocResp from 00:16:b6:f7:7a:6b (capab=0x611 status=0 aid=5)
[ 88.759559] wlan0: associated
[ 88.772128] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 99.348015] wlan0: no IPv6 routers present
[ 8299.278874] cdrom: This disc doesn't have any tracks I recognize!
[ 8302.783098] UDF-fs: Filesystem marked read-only because writing to pseudooverwrite partition is not implemented.
[ 8302.900848] UDF-fs INFO UDF: Mounting volume 'asdfadf', timestamp 2007/07/08 18:45 (1f10)
[14500.404067] UDF-fs: No VRS found
[14500.556691] ISO 9660 Extensions: Microsoft Joliet Level 3
[14500.557455] ISOFS: changing to secondary root
[14544.851476] UDF-fs: Partition marked readonly; forcing readonly mount
[14544.893585] UDF-fs INFO UDF: Mounting volume 'WHAT_THE_BLEEP_SIDEA', timestamp 2005/05/09 23:01 (1f10)
[14631.145574] UDF-fs: Partition marked readonly; forcing readonly mount
[14636.397488] UDF-fs INFO UDF: Mounting volume 'man from earth', timestamp 2008/08/05 07:51 (1f10)
[20324.836694] UDF-fs: Partition marked readonly; forcing readonly mount
[20324.878250] UDF-fs INFO UDF: Mounting volume 'THE_PIANIST', timestamp 2003/04/09 19:05 (1f10)
[20382.904995] UDF-fs: Partition marked readonly; forcing readonly mount
[20382.952776] UDF-fs INFO UDF: Mounting volume 'THE_PIANIST', timestamp 2003/04/11 18:38 (1f10)
[35693.012374] UDF-fs: Partition marked readonly; forcing readonly mount
[98630.053602] NET: Registered protocol family 4