rendered paste body[17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[17179569.184000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[17179569.184000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262064
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32688 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f8c20
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x10000408 MSFT 0x00000097) @ 0x3ffb0000
[17179569.184000] ACPI: FADT (v002 A M I OEMFACP 0x10000408 MSFT 0x00000097) @ 0x3ffb0200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x10000408 MSFT 0x00000097) @ 0x3ffb0300
[17179569.184000] ACPI: OEMB (v001 A M I OEMBIOS 0x10000408 MSFT 0x00000097) @ 0x3ffc0040
[17179569.184000] ACPI: DSDT (v001 K7V88 K7V88001 0x00000001 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bffc0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda2 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2000.356 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.908000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.912000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.944000] Memory: 1028564k/1048256k available (1976k kernel code, 18932k reserved, 606k data, 288k init, 130752k highmem)
[17179569.944000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.024000] Calibrating delay using timer specific routine.. 4005.12 BogoMIPS (lpj=8010257)
[17179570.024000] Security Framework v1.0.0 initialized
[17179570.024000] SELinux: Disabled at boot.
[17179570.024000] Mount-cache hash table entries: 512
[17179570.024000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.024000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.024000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.024000] CPU: L2 Cache: 512K (64 bytes/line)
[17179570.024000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179570.024000] mtrr: v2.0 (20020519)
[17179570.024000] CPU: AMD Athlon(tm) XP 2600+ stepping 00
[17179570.024000] Enabling fast FPU save and restore... done.
[17179570.024000] Enabling unmasked SIMD FPU exception support... done.
[17179570.024000] Checking 'hlt' instruction... OK.
[17179570.040000] checking if image is initramfs... it is
[17179570.560000] Freeing initrd memory: 6617k freed
[17179570.572000] ACPI: Looking for DSDT ... not found!
[17179570.576000] ENABLING IO-APIC IRQs
[17179570.576000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.720000] NET: Registered protocol family 16
[17179570.720000] EISA bus registered
[17179570.720000] ACPI: bus type pci registered
[17179570.720000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[17179570.720000] PCI: Using configuration type 1
[17179570.720000] ACPI: Subsystem revision 20051216
[17179570.724000] ACPI: Interpreter enabled
[17179570.724000] ACPI: Using IOAPIC for interrupt routing
[17179570.724000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.724000] PCI: Probing PCI hardware (bus 00)
[17179570.728000] Boot video device is 0000:01:00.0
[17179570.728000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.740000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179570.740000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179570.740000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179570.740000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[17179570.740000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.740000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.740000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.740000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.740000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.740000] pnp: PnP ACPI init
[17179570.744000] pnp: PnP ACPI: found 9 devices
[17179570.744000] PnPBIOS: Disabled by ACPI PNP
[17179570.744000] PCI: Using ACPI for IRQ routing
[17179570.744000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.748000] PCI: Bridge: 0000:00:01.0
[17179570.748000] IO window: disabled.
[17179570.748000] MEM window: faa00000-feafffff
[17179570.748000] PREFETCH window: b7f00000-c7efffff
[17179570.748000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.748000] audit: initializing netlink socket (disabled)
[17179570.748000] audit(1156980154.748:1): initialized
[17179570.748000] highmem bounce pool size: 64 pages
[17179570.748000] VFS: Disk quotas dquot_6.5.1
[17179570.748000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.748000] Initializing Cryptographic API
[17179570.748000] io scheduler noop registered
[17179570.748000] io scheduler anticipatory registered
[17179570.748000] io scheduler deadline registered
[17179570.748000] io scheduler cfq registered
[17179570.748000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179570.748000] isapnp: Scanning for PnP cards...
[17179571.104000] isapnp: No Plug & Play device found
[17179571.116000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179571.116000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179571.116000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.116000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.116000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179571.116000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.116000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.120000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.120000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.120000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.120000] mice: PS/2 mouse device common for all mice
[17179571.120000] EISA: Probing bus 0 at eisa.0
[17179571.120000] EISA: Detected 0 cards.
[17179571.120000] NET: Registered protocol family 2
[17179571.156000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.156000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179571.156000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.156000] TCP: Hash tables configured (established 262144 bind 65536)
[17179571.156000] TCP reno registered
[17179571.156000] TCP bic registered
[17179571.156000] NET: Registered protocol family 1
[17179571.156000] NET: Registered protocol family 8
[17179571.156000] NET: Registered protocol family 20
[17179571.156000] Using IPI Shortcut mode
[17179571.156000] ACPI wakeup devices:
[17179571.156000] PCI0 PS2K UAR1 MC97 USB1 USB2 USB3 USB4 ILAN
[17179571.156000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.156000] Freeing unused kernel memory: 288k freed
[17179571.168000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.204000] vga16fb: initializing
[17179571.204000] vga16fb: mapped to 0xc00a0000
[17179571.360000] Console: switching to colour frame buffer device 80x25
[17179571.360000] fb0: VGA16 VGA frame buffer device
[17179572.488000] Capability LSM initialized
[17179572.924000] SCSI subsystem initialized
[17179572.928000] ACPI: bus type scsi registered
[17179572.928000] libata version 1.20 loaded.
[17179572.928000] sata_via 0000:00:0f.0: version 1.1
[17179572.928000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[17179572.928000] sata_via 0000:00:0f.0: routed to hard irq line 10
[17179572.928000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169
[17179572.928000] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169
[17179573.092000] ata1: dev 0 cfg 00:427a 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3e01 87:4023 88:407f 93:0000
[17179573.092000] ata1: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
[17179573.092000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0x00000000
[17179573.092000] ata1: dev 0 configured for UDMA/133
[17179573.092000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0x00000000
[17179573.092000] scsi0 : sata_via
[17179574.296000] scsi1 : sata_via
[17179574.296000] Vendor: ATA Model: WDC WD4000KD-19N Rev: 01.0
[17179574.296000] Type: Direct-Access ANSI SCSI revision: 05
[17179574.304000] Driver 'sd' needs updating - please use bus_type methods
[17179574.304000] SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
[17179574.304000] SCSI device sda: drive cache: write back
[17179574.304000] SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
[17179574.304000] SCSI device sda: drive cache: write back
[17179574.304000] sda: sda1
[17179574.332000] sd 0:0:0:0: Attached scsi disk sda
[17179574.440000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179574.440000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[17179574.440000] PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179574.440000] VP_IDE: chipset revision 6
[17179574.440000] VP_IDE: not 100% native mode: will probe irqs later
[17179574.440000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179574.440000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[17179574.440000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[17179574.440000] Probing IDE interface ide0...
[17179574.856000] hda: Maxtor 6Y080L0, ATA DISK drive
[17179575.528000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.540000] Probing IDE interface ide1...
[17179576.404000] hdc: LITE-ON COMBO SOHC-5236K, ATAPI CD/DVD-ROM drive
[17179577.076000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.088000] hda: max request size: 128KiB
[17179577.096000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179577.096000] hda: cache flushes supported
[17179577.096000] hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
[17179577.132000] hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache
[17179577.132000] Uniform CD-ROM driver Revision: 3.20
[17179577.544000] usbcore: registered new driver usbfs
[17179577.544000] usbcore: registered new driver hub
[17179577.544000] USB Universal Host Controller Interface driver v2.3
[17179577.544000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[17179577.544000] PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 1
[17179577.544000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179577.544000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179577.544000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000c000
[17179577.544000] hub 1-0:1.0: USB hub found
[17179577.544000] hub 1-0:1.0: 2 ports detected
[17179577.648000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
[17179577.648000] PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 1
[17179577.648000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179577.648000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179577.648000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000c400
[17179577.648000] hub 2-0:1.0: USB hub found
[17179577.648000] hub 2-0:1.0: 2 ports detected
[17179577.752000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
[17179577.752000] PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 1
[17179577.752000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179577.752000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179577.752000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000c800
[17179577.752000] hub 3-0:1.0: USB hub found
[17179577.752000] hub 3-0:1.0: 2 ports detected
[17179577.856000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
[17179577.856000] PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 1
[17179577.856000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179577.856000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179577.856000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000cc00
[17179577.856000] hub 4-0:1.0: USB hub found
[17179577.856000] hub 4-0:1.0: 2 ports detected
[17179577.888000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179577.960000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
[17179577.960000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179577.960000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179577.960000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xfebff800
[17179577.960000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.960000] hub 5-0:1.0: USB hub found
[17179577.960000] hub 5-0:1.0: 8 ports detected
[17179578.176000] Attempting manual resume
[17179578.188000] kjournald starting. Commit interval 5 seconds
[17179578.188000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.412000] usb 1-1: device not accepting address 2, error -71
[17179580.156000] usb 1-1: new full speed USB device using uhci_hcd and address 4
[17179580.536000] usb 1-2: new low speed USB device using uhci_hcd and address 5
[17179580.948000] usb 3-2: new full speed USB device using uhci_hcd and address 2
[17179588.276000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179589.900000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179589.904000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.056000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.072000] Linux video capture interface: v1.00
[17179590.080000] agpgart: Detected VIA KT880 chipset
[17179590.088000] agpgart: AGP aperture is 128M @ 0xe0000000
[17179590.204000] nvidia: module license 'NVIDIA' taints kernel.
[17179590.208000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 185
[17179590.212000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006
[17179590.244000] ivtv: no version for "struct_module" found: kernel tainted.
[17179590.248000] ivtv: ==================== START INIT IVTV ====================
[17179590.248000] ivtv: version 0.4.6 (tagged release) loading
[17179590.248000] ivtv: Linux version: 2.6.15-26-386 preempt 486 gcc-4.0
[17179590.248000] ivtv: In case of problems please include the debug info between
[17179590.248000] ivtv: the START INIT IVTV and END INIT IVTV lines, along with
[17179590.248000] ivtv: any module options, when mailing the ivtv-users mailinglist.
[17179590.248000] ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
[17179590.248000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 193
[17179590.288000] usbcore: registered new driver usbserial
[17179590.288000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[17179590.288000] usbcore: registered new driver usbserial_generic
[17179590.288000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[17179590.292000] drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
[17179590.292000] pl2303 1-1:1.0: pl2303 converter detected
[17179590.292000] usb 1-1: pl2303 converter now attached to ttyUSB0
[17179590.292000] usbcore: registered new driver pl2303
[17179590.292000] drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
[17179590.388000] tveeprom: ivtv version
[17179590.388000] tveeprom: Hauppauge: model = 26582, rev = F0B2, serial# = 9496757
[17179590.388000] tveeprom: tuner = TCL M2523_5N_E (idx = 112, type = 50)
[17179590.388000] tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
[17179590.388000] tveeprom: audio processor = CX25843 (type = 25)
[17179590.388000] tveeprom: decoder processor = CX25843 (type = 1e)
[17179590.388000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
[17179590.416000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
[17179590.416000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
[17179590.556000] cx25840 0-0044: ivtv driver
[17179590.556000] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[17179590.936000] usbcore: registered new driver hiddev
[17179591.004000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
[17179591.004000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2
[17179591.004000] usbcore: registered new driver usbhid
[17179591.004000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179591.216000] Real Time Clock Driver v1.12
[17179591.248000] lirc_dev: IR Remote Control driver registered, at major 61
[17179591.296000]
[17179591.296000] lirc_mceusb2: USB remote driver for LIRC v0.22
[17179591.296000] lirc_mceusb2: Martin Blatter <martin_a_blatter@yahoo.com>
[17179592.820000] input: PC Speaker as /class/input/input2
[17179592.832000] ts: Compaq touchscreen protocol output
[17179593.372000] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[17179593.372000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179593.508000] lirc_dev: lirc_register_plugin: sample_rate: 0
[17179593.512000] lirc_mceusb2[2]: SMK eHome Infrared Transceiver on usb3:2
[17179593.512000] usbcore: registered new driver lirc_mceusb2
[17179594.356000] cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
[17179594.408000] ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
[17179594.444000] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
[17179594.452000] ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
[17179595.184000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[17179595.400000] ivtv0: Encoder revision: 0x02050032
[17179595.400000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
[17179595.400000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
[17179595.400000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
[17179595.400000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
[17179595.400000] tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
[17179595.472000] ivtv0: Initialized WinTV PVR 150, card #0
[17179595.472000] ivtv: ==================== END INIT IVTV ====================
[17179595.496000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201
[17179595.496000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179596.024000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209
[17179596.024000] eth0: VIA Rhine II at 0x1d400, 00:0b:6a:76:35:90, IRQ 209.
[17179596.024000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[17179596.220000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179596.580000] lp: driver loaded but no devices found
[17179596.904000] usbcore: registered new driver lirc_mceusb
[17179596.904000] /home/word/Desktop/lirc/lirc-0.8.0/drivers/lirc_mceusb/lirc_mceusb.c: USB Microsoft IR Transceiver Driver v0.2
[17179596.944000] Adding 1558264k swap on /dev/hda5. Priority:-1 extents:1 across:1558264k
[17179597.088000] EXT3 FS on hda2, internal journal
[17179597.328000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179597.328000] md: bitmap version 4.39
[17179597.340000] NET: Registered protocol family 17
[17179597.800000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179598.916000] cdrom: open failed.
[17179599.284000] cdrom: open failed.
[17179599.376000] cdrom: open failed.
[17179599.416000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179599.480000] NTFS volume version 3.1.
[17179599.568000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[17179599.568000] SGI XFS Quota Management subsystem
[17179599.568000] XFS mounting filesystem sda1
[17179599.652000] Ending clean XFS mount for filesystem: sda1
[17179600.476000] NET: Registered protocol family 10
[17179600.476000] lo: Disabled Privacy Extensions
[17179600.476000] IPv6 over IPv4 tunneling driver
[17179601.976000] ACPI: Power Button (FF) [PWRF]
[17179601.976000] ACPI: Power Button (CM) [PWRB]
[17179602.092000] ibm_acpi: ec object not found
[17179602.128000] pcc_acpi: loading...
[17179604.556000] ppdev: user-space parallel port driver
[17179605.240000] apm: BIOS not found.
[17179611.232000] eth0: no IPv6 routers present
[17179628.388000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179628.388000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179628.388000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179628.604000] i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips
[17179628.604000] i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips
[17179628.604000] i2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chips