rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-gentoo (root@localhost) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #6 SMP Sat Sep 12 21:48:18 CEST 2009
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.31-gentoo console=tty1 crypt_root=/dev/sda2 dolvm root_key=key256 real_root=/dev/system/gentoo64
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] modified: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
[ 0.000000] 0000000000 - 003fe00000 page 2M
[ 0.000000] 003fe00000 - 003fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3fff0000 @ 8000-b000
[ 0.000000] RAMDISK: 2fe33000 - 30033dc7
[ 0.000000] ACPI: RSDP 00000000000f6a10 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 000000003fff3000 00034 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: FACP 000000003fff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: DSDT 000000003fff30c0 04B39 (v01 GBT NVDAACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 000000003fff0000 00040
[ 0.000000] ACPI: SSDT 000000003fff7c80 00188 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: MCFG 000000003fff7e40 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: APIC 000000003fff7c00 0007C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fff0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000
[ 0.000000] NODE_DATA [0000000000009000 - 000000000000dfff]
[ 0.000000] bootmap [000000000000e000 - 0000000000015fff] pages 8
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00017853a4] TEXT DATA BSS ==> [0001000000 - 00017853a4]
[ 0.000000] #3 [002fe33000 - 0030033dc7] RAMDISK ==> [002fe33000 - 0030033dc7]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001786000 - 0001786092] BRK ==> [0001786000 - 0001786092]
[ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001c00000-ffff8800029fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262026
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 100 pages reserved
[ 0.000000] DMA zone: 3838 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3528 pages used for memmap
[ 0.000000] DMA32 zone: 254504 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:90000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages at ffff880001791000, static data 82720 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258342
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-gentoo console=tty1 crypt_root=/dev/sda2 dolvm root_key=key256 real_root=/dev/system/gentoo64
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 8ad2000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1023660k/1048512k available (4017k kernel code, 408k absent, 24444k reserved, 2343k data, 528k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2010.045 MHz processor.
[ 0.000012] spurious 8259A interrupt: IRQ7.
[ 0.000999] Console: colour EGA 80x25
[ 0.000999] console [tty1] enabled
[ 0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.09 BogoMIPS (lpj=2010045)
[ 0.001295] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.002095] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.002509] Mount-cache hash table entries: 256
[ 0.002750] Initializing cgroup subsys ns
[ 0.002836] Initializing cgroup subsys cpuacct
[ 0.002921] Initializing cgroup subsys freezer
[ 0.003020] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003105] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003190] CPU 0/0x0 -> Node 0
[ 0.003273] tseg: 0000000000
[ 0.003285] CPU: Physical Processor ID: 0
[ 0.003368] CPU: Processor Core ID: 0
[ 0.003452] mce: CPU supports 5 MCE banks
[ 0.003544] Performance Counters: AMD PMU driver.
[ 0.003641] ... version: 0
[ 0.003724] ... bit width: 48
[ 0.003807] ... generic counters: 4
[ 0.003891] ... value mask: 0000ffffffffffff
[ 0.004001] ... max period: 00007fffffffffff
[ 0.004085] ... fixed-purpose counters: 0
[ 0.004168] ... counter mask: 000000000000000f
[ 0.004263] ACPI: Core revision 20090521
[ 0.011069] Setting APIC routing to flat
[ 0.011454] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.021587] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.021996] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 4019.90 BogoMIPS (lpj=2009951)
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU 1/0x1 -> Node 0
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] mce: CPU supports 5 MCE banks
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.092411] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.093088] Brought up 2 CPUs
[ 0.093172] Total of 2 processors activated (8039.99 BogoMIPS).
[ 0.093333] khelper used greatest stack depth: 5936 bytes left
[ 0.094136] NET: Registered protocol family 16
[ 0.094163] node 0 link 0: io port [1000, fffff]
[ 0.094163] TOM: 0000000040000000 aka 1024M
[ 0.094163] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.094163] node 0 link 0: mmio [feb00000, fec0ffff]
[ 0.094163] node 0 link 0: mmio [a0000, bffff]
[ 0.094163] node 0 link 0: mmio [40000000, ffb7ffff]
[ 0.094163] bus: [00,ff] on node 0 link 0
[ 0.094163] bus: 00 index 0 io port: [0, ffff]
[ 0.094163] bus: 00 index 1 mmio: [40000000, fcffffffff]
[ 0.094163] bus: 00 index 2 mmio: [feb00000, fec0ffff]
[ 0.094163] bus: 00 index 3 mmio: [a0000, bffff]
[ 0.094163] ACPI: bus type pci registered
[ 0.095022] dca service started, version 1.8
[ 0.095086] PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255
[ 0.095098] PCI: MCFG area at d0000000 reserved in E820
[ 0.101649] PCI: Using MMCONFIG at d0000000 - dfffffff
[ 0.101735] PCI: Using configuration type 1 for base access
[ 0.109006] bio: create slab <bio-0> at 0
[ 0.109660] ACPI: EC: Look up EC in DSDT
[ 0.117255] ACPI: Interpreter enabled
[ 0.117342] ACPI: (supports S0 S5)
[ 0.117455] ACPI: Using IOAPIC for interrupt routing
[ 0.126157] ACPI: No dock devices found.
[ 0.126348] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.126478] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.126478] pci 0000:00:01.1: reg 10 io port: [0xec00-0xec1f]
[ 0.126478] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.126478] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.126478] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.126478] pci 0000:00:01.1: PME# disabled
[ 0.127002] pci 0000:00:02.0: reg 10 32bit mmio: [0xf2004000-0xf2004fff]
[ 0.127020] pci 0000:00:02.0: supports D1 D2
[ 0.127022] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127108] pci 0000:00:02.0: PME# disabled
[ 0.127208] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
[ 0.127229] pci 0000:00:02.1: supports D1 D2
[ 0.127232] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127317] pci 0000:00:02.1: PME# disabled
[ 0.127421] pci 0000:00:04.0: reg 10 io port: [0xb800-0xb8ff]
[ 0.127425] pci 0000:00:04.0: reg 14 io port: [0xbc00-0xbcff]
[ 0.127429] pci 0000:00:04.0: reg 18 32bit mmio: [0xf2000000-0xf2000fff]
[ 0.127444] pci 0000:00:04.0: supports D1 D2
[ 0.127466] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 0.127490] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.127494] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.127498] pci 0000:00:07.0: reg 18 io port: [0x970-0x977]
[ 0.127502] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73]
[ 0.127506] pci 0000:00:07.0: reg 20 io port: [0xd000-0xd00f]
[ 0.127510] pci 0000:00:07.0: reg 24 32bit mmio: [0xf2001000-0xf2001fff]
[ 0.127536] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]
[ 0.127540] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]
[ 0.127544] pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
[ 0.127548] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
[ 0.127552] pci 0000:00:08.0: reg 20 io port: [0xe400-0xe40f]
[ 0.127557] pci 0000:00:08.0: reg 24 32bit mmio: [0xf2002000-0xf2002fff]
[ 0.127591] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf2003000-0xf2003fff]
[ 0.127596] pci 0000:00:0a.0: reg 14 io port: [0xe800-0xe807]
[ 0.127611] pci 0000:00:0a.0: supports D1 D2
[ 0.127613] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127699] pci 0000:00:0a.0: PME# disabled
[ 0.127808] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127894] pci 0000:00:0b.0: PME# disabled
[ 0.128010] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128096] pci 0000:00:0c.0: PME# disabled
[ 0.128206] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128291] pci 0000:00:0d.0: PME# disabled
[ 0.128401] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128486] pci 0000:00:0e.0: PME# disabled
[ 0.128670] pci 0000:00:09.0: transparent bridge
[ 0.128755] pci 0000:00:09.0: bridge io port: [0x6000-0x6fff]
[ 0.128788] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff]
[ 0.128824] pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff]
[ 0.128857] pci 0000:00:0d.0: bridge io port: [0x7000-0x7fff]
[ 0.128882] pci 0000:05:00.0: reg 10 64bit mmio: [0xe0000000-0xefffffff]
[ 0.128890] pci 0000:05:00.0: reg 18 64bit mmio: [0xf1000000-0xf100ffff]
[ 0.128895] pci 0000:05:00.0: reg 20 io port: [0xa000-0xa0ff]
[ 0.128902] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.128917] pci 0000:05:00.0: supports D1 D2
[ 0.129004] pci 0000:05:00.1: reg 10 64bit mmio: [0xf1010000-0xf101ffff]
[ 0.129029] pci 0000:05:00.1: supports D1 D2
[ 0.129042] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.129241] pci 0000:00:0e.0: bridge io port: [0xa000-0xafff]
[ 0.129244] pci 0000:00:0e.0: bridge 32bit mmio: [0xf0000000-0xf1ffffff]
[ 0.129248] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.129262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.129494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.184085] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.185199] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.185636] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.186259] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.186694] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.187103] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.187447] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.187884] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.188261] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.188605] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.189050] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.189396] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.189740] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.190110] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.190464] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.190815] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.191352] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.191640] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.191927] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.192204] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.192434] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.192720] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.193053] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.193382] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.193700] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.194023] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.194356] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.194674] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.194994] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.195331] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.195656] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.195985] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.196203] SCSI subsystem initialized
[ 0.196203] libata version 3.00 loaded.
[ 0.196203] usbcore: registered new interface driver usbfs
[ 0.196996] usbcore: registered new interface driver hub
[ 0.197073] usbcore: registered new device driver usb
[ 0.197073] PCI: Using ACPI for IRQ routing
[ 0.204995] pnp: PnP ACPI init
[ 0.205094] ACPI: bus type pnp registered
[ 0.209230] pnp: PnP ACPI: found 13 devices
[ 0.209230] ACPI: ACPI bus type pnp unregistered
[ 0.209230] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.209238] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.209324] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.209409] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.209495] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.209971] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.210059] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.210145] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.210230] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.210316] system 00:02: ioport range 0x290-0x294 has been reserved
[ 0.210401] system 00:02: ioport range 0x294-0x297 could not be reserved
[ 0.210492] system 00:0b: iomem range 0xd0000000-0xdfffffff has been reserved
[ 0.210580] system 00:0c: iomem range 0xcec00-0xcffff has been reserved
[ 0.210666] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.210752] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.210837] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.210970] system 00:0c: iomem range 0x3fff0000-0x3fffffff could not be reserved
[ 0.211126] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.211212] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.211298] system 00:0c: iomem range 0x100000-0x3ffeffff could not be reserved
[ 0.211453] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.211609] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.216481] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.216567] pci 0000:00:09.0: IO window: 0x6000-0x6fff
[ 0.216652] pci 0000:00:09.0: MEM window: disabled
[ 0.216737] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.216822] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.216907] pci 0000:00:0b.0: IO window: 0x9000-0x9fff
[ 0.216980] Switched to high resolution mode on CPU 0
[ 0.216984] pci 0000:00:0b.0: MEM window: disabled
[ 0.217077] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.217162] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.217246] pci 0000:00:0c.0: IO window: 0x8000-0x8fff
[ 0.217318] Switched to high resolution mode on CPU 1
[ 0.217332] pci 0000:00:0c.0: MEM window: disabled
[ 0.217417] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.217502] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
[ 0.217586] pci 0000:00:0d.0: IO window: 0x7000-0x7fff
[ 0.217671] pci 0000:00:0d.0: MEM window: disabled
[ 0.217756] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.217843] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
[ 0.217928] pci 0000:00:0e.0: IO window: 0xa000-0xafff
[ 0.218023] pci 0000:00:0e.0: MEM window: 0xf0000000-0xf1ffffff
[ 0.218109] pci 0000:00:0e.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.218269] pci 0000:00:09.0: setting latency timer to 64
[ 0.218274] pci 0000:00:0b.0: setting latency timer to 64
[ 0.218279] pci 0000:00:0c.0: setting latency timer to 64
[ 0.218284] pci 0000:00:0d.0: setting latency timer to 64
[ 0.218289] pci 0000:00:0e.0: setting latency timer to 64
[ 0.218294] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.218297] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.218300] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff]
[ 0.218302] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.218305] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.218308] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]
[ 0.218311] pci_bus 0000:03: resource 0 io: [0x8000-0x8fff]
[ 0.218314] pci_bus 0000:04: resource 0 io: [0x7000-0x7fff]
[ 0.218316] pci_bus 0000:05: resource 0 io: [0xa000-0xafff]
[ 0.218319] pci_bus 0000:05: resource 1 mem: [0xf0000000-0xf1ffffff]
[ 0.218322] pci_bus 0000:05: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.218361] NET: Registered protocol family 2
[ 0.218555] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.219252] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.220741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.221466] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.221554] TCP reno registered
[ 0.221758] NET: Registered protocol family 1
[ 0.221912] Trying to unpack rootfs image as initramfs...
[ 0.271161] Freeing initrd memory: 2051k freed
[ 0.273976] microcode: CPU0: AMD CPU family 0xf not supported
[ 0.274091] microcode: CPU1: AMD CPU family 0xf not supported
[ 0.274234] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.274390] Scanning for low memory corruption every 60 seconds
[ 0.274786] audit: initializing netlink socket (disabled)
[ 0.274884] type=2000 audit(1252792176.274:1): initialized
[ 0.282439] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.287926] msgmni has been set to 2003
[ 0.288565] alg: No test for stdrng (krng)
[ 0.288819] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.288975] io scheduler noop registered
[ 0.289070] io scheduler anticipatory registered
[ 0.289153] io scheduler deadline registered
[ 0.289318] io scheduler cfq registered (default)
[ 0.289501] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.289588] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 0.289677] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.289763] pci 0000:00:0b.0: Linking AER extended capability
[ 0.289881] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.289969] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 0.290104] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.290189] pci 0000:00:0c.0: Linking AER extended capability
[ 0.290311] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.290398] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 0.290488] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.290572] pci 0000:00:0d.0: Linking AER extended capability
[ 0.290697] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.290784] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 0.290874] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.290959] pci 0000:00:0e.0: Linking AER extended capability
[ 0.291063] pci 0000:05:00.0: Boot video device
[ 0.291237] alloc irq_desc for 24 on node 0
[ 0.291240] alloc kstat_irqs on node 0
[ 0.291248] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 0.291253] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 0.291446] alloc irq_desc for 25 on node 0
[ 0.291448] alloc kstat_irqs on node 0
[ 0.291453] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X
[ 0.291458] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 0.291636] alloc irq_desc for 26 on node 0
[ 0.291638] alloc kstat_irqs on node 0
[ 0.291643] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X
[ 0.291647] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 0.291826] alloc irq_desc for 27 on node 0
[ 0.291828] alloc kstat_irqs on node 0
[ 0.291833] pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X
[ 0.291837] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 0.292086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.297101] Non-volatile memory driver v1.3
[ 0.297212] Linux agpgart interface v0.103
[ 0.297619] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.297778] ACPI: Power Button [PWRF]
[ 0.297971] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.298176] ACPI: Power Button [PWRB]
[ 0.298503] processor LNXCPU:00: registered as cooling_device0
[ 0.298666] processor LNXCPU:01: registered as cooling_device1
[ 0.302199] [drm] Initialized drm 1.1.0 20060810
[ 0.302287] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.546103] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.546773] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.549663] brd: module loaded
[ 0.551151] loop: module loaded
[ 0.551744] sata_nv 0000:00:07.0: version 3.5
[ 0.552171] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.552264] alloc irq_desc for 23 on node 0
[ 0.552266] alloc kstat_irqs on node 0
[ 0.552274] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.552476] sata_nv 0000:00:07.0: setting latency timer to 64
[ 0.552542] scsi0 : sata_nv
[ 0.552818] scsi1 : sata_nv
[ 0.553167] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd000 irq 23
[ 0.553254] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd008 irq 23
[ 0.553354] work_for_cpu used greatest stack depth: 5760 bytes left
[ 0.553375] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.553401] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.553969] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 0.554092] alloc irq_desc for 22 on node 0
[ 0.554094] alloc kstat_irqs on node 0
[ 0.554100] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 0.554291] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.554348] scsi2 : sata_nv
[ 0.554584] scsi3 : sata_nv
[ 0.554893] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 22
[ 0.554979] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 22
[ 0.555095] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.555331] pata_amd 0000:00:06.0: version 0.4.1
[ 0.555364] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.555418] scsi4 : pata_amd
[ 0.555638] scsi5 : pata_amd
[ 0.556415] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.556501] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.556594] work_for_cpu used greatest stack depth: 5320 bytes left
[ 0.556901] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.556986] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.557195] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.559542] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 0.559628] alloc irq_desc for 21 on node 0
[ 0.559630] alloc kstat_irqs on node 0
[ 0.559637] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
[ 0.559794] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.559845] nv_probe: set workaround bit for reversed mac addr
[ 0.706031] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.709517] ata4.00: ATA-8: ST3750330AS, SD15, max UDMA/133
[ 0.709609] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.720516] ata4.00: configured for UDMA/133
[ 0.720717] scsi 3:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5
[ 0.721150] sd 3:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 0.721357] sd 3:0:0:0: [sda] Write Protect is off
[ 0.721442] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.721462] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.721738] sda:
[ 0.721919] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 0.736709] sda1 sda2
[ 0.737188] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.072754] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:14:85:35:a4:8a
[ 1.072912] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 1.073299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.073384] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 1.073710] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 1.073796] alloc irq_desc for 20 on node 0
[ 1.073798] alloc kstat_irqs on node 0
[ 1.073806] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
[ 1.073972] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.073976] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.074095] drivers/usb/core/inode.c: creating file 'devices'
[ 1.074099] drivers/usb/core/inode.c: creating file '001'
[ 1.074178] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.074339] ehci_hcd 0000:00:02.1: reset hcs_params 0x10148a dbg=1 cc=1 pcc=4 !ppc ports=10
[ 1.074347] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0
[ 1.074351] ehci_hcd 0000:00:02.1: reset hcc_params a082 caching frame 256/512/1024
[ 1.074375] ehci_hcd 0000:00:02.1: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.074379] ehci_hcd 0000:00:02.1: bogus port configuration: cc=1 x pcc=4 < ports=10
[ 1.074385] ehci_hcd 0000:00:02.1: debug port 1
[ 1.074470] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.074473] ehci_hcd 0000:00:02.1: supports USB remote wakeup
[ 1.074492] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeb00000
[ 1.074578] ehci_hcd 0000:00:02.1: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.074584] ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 1.080015] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.080124] usb usb1: default language 0x0409
[ 1.080131] usb usb1: udev 1, busnum 1, minor = 0
[ 1.080134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.080219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.080374] usb usb1: Product: EHCI Host Controller
[ 1.080458] usb usb1: Manufacturer: Linux 2.6.31-gentoo ehci_hcd
[ 1.080543] usb usb1: SerialNumber: 0000:00:02.1
[ 1.080666] usb usb1: uevent
[ 1.080738] usb usb1: usb_probe_device
[ 1.080741] usb usb1: configuration #1 chosen from 1 choice
[ 1.080832] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.080848] usb 1-0:1.0: uevent
[ 1.080911] hub 1-0:1.0: usb_probe_interface
[ 1.080913] hub 1-0:1.0: usb_probe_interface - got id
[ 1.080916] hub 1-0:1.0: USB hub found
[ 1.081017] hub 1-0:1.0: 10 ports detected
[ 1.081101] hub 1-0:1.0: standalone hub
[ 1.081102] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.081104] hub 1-0:1.0: individual port over-current protection
[ 1.081107] hub 1-0:1.0: power on to power good time: 20ms
[ 1.081111] hub 1-0:1.0: local power source is good
[ 1.081114] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.081147] drivers/usb/core/inode.c: creating file '001'
[ 1.081167] work_for_cpu used greatest stack depth: 5112 bytes left
[ 1.081312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.081396] ohci_hcd: block sizes: ed 80 td 96
[ 1.081712] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 1.081799] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 1.081964] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.081967] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.082068] drivers/usb/core/inode.c: creating file '002'
[ 1.082136] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.082309] ohci_hcd 0000:00:02.0: created debug files
[ 1.082311] ohci_hcd 0000:00:02.0: supports USB remote wakeup
[ 1.082318] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf2004000
[ 1.135024] ohci_hcd 0000:00:02.0: OHCI controller state
[ 1.135027] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
[ 1.135031] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
[ 1.135034] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
[ 1.135038] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
[ 1.135041] ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
[ 1.135045] ohci_hcd 0000:00:02.0: hcca frame #0003
[ 1.135049] ohci_hcd 0000:00:02.0: roothub.a 0100020a POTPGT=1 NPS NDP=10(10)
[ 1.135052] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.135056] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
[ 1.135060] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
[ 1.135064] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
[ 1.135068] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
[ 1.135071] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
[ 1.135075] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
[ 1.135079] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
[ 1.135083] ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
[ 1.135087] ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
[ 1.135091] ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS
[ 1.135094] ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
[ 1.135108] usb usb2: default language 0x0409
[ 1.135114] usb usb2: udev 1, busnum 2, minor = 128
[ 1.135117] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.135202] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.135357] usb usb2: Product: OHCI Host Controller
[ 1.135441] usb usb2: Manufacturer: Linux 2.6.31-gentoo ohci_hcd
[ 1.135525] usb usb2: SerialNumber: 0000:00:02.0
[ 1.135647] usb usb2: uevent
[ 1.135699] usb usb2: usb_probe_device
[ 1.135702] usb usb2: configuration #1 chosen from 1 choice
[ 1.135791] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.135807] usb 2-0:1.0: uevent
[ 1.135859] hub 2-0:1.0: usb_probe_interface
[ 1.135861] hub 2-0:1.0: usb_probe_interface - got id
[ 1.135864] hub 2-0:1.0: USB hub found
[ 1.135954] hub 2-0:1.0: 10 ports detected
[ 1.136047] hub 2-0:1.0: standalone hub
[ 1.136049] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.136052] hub 2-0:1.0: global over-current protection
[ 1.136054] hub 2-0:1.0: power on to power good time: 2ms
[ 1.136058] hub 2-0:1.0: local power source is good
[ 1.136061] hub 2-0:1.0: no over-current condition exists
[ 1.136063] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.136094] drivers/usb/core/inode.c: creating file '001'
[ 1.136177] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.136478] usbcore: registered new interface driver usblp
[ 1.136564] Initializing USB Mass Storage driver...
[ 1.136707] usbcore: registered new interface driver usb-storage
[ 1.136793] USB Mass Storage support registered.
[ 1.136936] usbcore: registered new interface driver libusual
[ 1.137157] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.139940] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.140029] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.140275] mice: PS/2 mouse device common for all mice
[ 1.140711] rtc_cmos 00:04: RTC can wake from S4
[ 1.140878] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.140984] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 1.141511] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.141749] cpuidle: using governor ladder
[ 1.141833] cpuidle: using governor menu
[ 1.143244] usbcore: registered new interface driver hiddev
[ 1.143401] usbcore: registered new interface driver usbhid
[ 1.143486] usbhid: v2.6:USB HID core driver
[ 1.143640] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 1.143887] ALSA device list:
[ 1.143970] No soundcards found.
[ 1.144097] Netfilter messages via NETLINK v0.30.
[ 1.144203] nf_conntrack version 0.5.0 (8191 buckets, 32764 max)
[ 1.144649] ctnetlink v0.93: registering with nfnetlink.
[ 1.145434] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.145545] TCP cubic registered
[ 1.145628] Initializing XFRM netlink socket
[ 1.146061] NET: Registered protocol family 10
[ 1.147308] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.147455] IPv6 over IPv4 tunneling driver
[ 1.148229] NET: Registered protocol family 17
[ 1.148344] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
[ 1.148548] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8
[ 1.148632] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
[ 1.148724] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 1.149127] registered taskstats version 1
[ 1.149424] Freeing unused kernel memory: 528k freed
[ 1.149778] Write protecting the kernel read-only data: 5828k
[ 1.160780] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.182037] ehci_hcd 0000:00:02.1: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
[ 1.182043] hub 1-0:1.0: port 2: status 0501 change 0001
[ 1.237057] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000
[ 1.282047] hub 1-0:1.0: state 7 ports 10 chg 0004 evt 0000
[ 1.282063] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 1.332295] ehci_hcd 0000:00:02.1: port 2 full speed --> companion
[ 1.332303] ehci_hcd 0000:00:02.1: GetStatus port 2 status 003001 POWER OWNER sig=se0 CONNECT
[ 1.332327] hub 1-0:1.0: port 2 not reset yet, waiting 50ms
[ 1.383287] ehci_hcd 0000:00:02.1: GetStatus port 2 status 003802 POWER OWNER sig=j CSC
[ 1.383310] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0004
[ 1.383319] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
[ 1.383325] hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 1.487288] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[ 1.593281] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 1.644034] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 1.752275] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[ 1.829981] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 1.835062] usb 2-2: skipped 1 descriptor after interface
[ 1.838061] usb 2-2: default language 0x0409
[ 1.844053] usb 2-2: udev 2, busnum 2, minor = 129
[ 1.844060] usb 2-2: New USB device found, idVendor=0a12, idProduct=0001
[ 1.844066] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.844072] usb 2-2: Product: Bluetooth V2.0 Dongle
[ 1.844076] usb 2-2: Manufacturer: Bluetooth v2.0
[ 1.844182] usb 2-2: uevent
[ 1.844385] usb 2-2: usb_probe_device
[ 1.844391] usb 2-2: configuration #1 chosen from 1 choice
[ 1.847065] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 1.847123] usb 2-2:1.0: uevent
[ 1.847371] usb 2-2: adding 2-2:1.1 (config #1, interface 1)
[ 1.847410] usb 2-2:1.1: uevent
[ 1.847775] usb 2-2: adding 2-2:1.2 (config #1, interface 2)
[ 1.847809] usb 2-2:1.2: uevent
[ 1.848216] usb 2-2: adding 2-2:1.3 (config #1, interface 3)
[ 1.848282] usb 2-2:1.3: uevent
[ 1.848521] drivers/usb/core/inode.c: creating file '002'
[ 1.848564] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0004
[ 1.848585] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0004
[ 1.962125] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 2.216030] Clocksource tsc unstable (delta = -250184440 ns)
[ 4.701053] hub 1-0:1.0: hub_suspend
[ 4.701068] usb usb1: bus auto-suspend
[ 4.701073] ehci_hcd 0000:00:02.1: suspend root hub
[ 18.642600] EXT3-fs: dm-9: couldn't mount because of unsupported optional features (240).
[ 18.645974] EXT2-fs: dm-9: couldn't mount because of unsupported optional features (240).
[ 18.670276] EXT4-fs (dm-9): barriers enabled
[ 18.699308] kjournald2 starting: pid 2493, dev dm-9:8, commit interval 5 seconds
[ 18.699322] EXT4-fs (dm-9): delayed allocation enabled
[ 18.699326] EXT4-fs: file extents enabled
[ 18.700044] EXT4-fs: mballoc enabled
[ 18.700060] EXT4-fs (dm-9): mounted filesystem with ordered data mode
[ 19.700460] init-early.sh used greatest stack depth: 4632 bytes left
[ 21.936089] udev: starting version 145
[ 21.971717] usb usb2: uevent
[ 21.971756] usb 2-0:1.0: uevent
[ 21.971801] usb 2-2: uevent
[ 21.971838] usb 2-2:1.0: uevent
[ 21.971877] usb 2-2:1.1: uevent
[ 21.971917] usb 2-2:1.2: uevent
[ 21.971956] usb 2-2:1.3: uevent
[ 21.972059] usb usb1: uevent
[ 21.972095] usb 1-0:1.0: uevent
[ 22.229568] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 22.229575] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 22.229640] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 22.242354] Bluetooth: Core ver 2.15
[ 22.243495] NET: Registered protocol family 31
[ 22.243499] Bluetooth: HCI device and connection manager initialized
[ 22.243503] Bluetooth: HCI socket layer initialized
[ 22.284240] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 22.284264] btusb 2-2:1.0: usb_probe_interface
[ 22.284267] btusb 2-2:1.0: usb_probe_interface - got id
[ 22.284329] btusb 2-2:1.2: usb_probe_interface
[ 22.284332] btusb 2-2:1.2: usb_probe_interface - got id
[ 22.284344] btusb 2-2:1.3: usb_probe_interface
[ 22.284346] btusb 2-2:1.3: usb_probe_interface - got id
[ 22.284366] usbcore: registered new interface driver btusb
[ 22.404520] [drm] radeon default to kernel modesetting.
[ 22.404527] [drm] radeon kernel modesetting enabled.
[ 22.405172] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 22.405183] alloc irq_desc for 18 on node 0
[ 22.405188] alloc kstat_irqs on node 0
[ 22.405203] radeon 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 22.405213] radeon 0000:05:00.0: setting latency timer to 64
[ 22.409322] [drm] radeon: Initializing kernel modesetting.
[ 22.409403] [drm] register mmio base: 0xF1000000
[ 22.409408] [drm] register mmio size: 65536
[ 22.411970] ATOM BIOS: GV
[ 22.412179] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[ 22.412190] [drm] Clocks initialized !
[ 22.412197] [drm] Generation 2 PCI interface, using max accessible memory
[ 22.412512] [drm] Detected VRAM RAM=256M, BAR=256M
[ 22.412520] [drm] RAM width 128bits DDR
[ 22.413962] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[ 22.413979] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 22.413988] [drm] radeon: VRAM 256M
[ 22.413992] [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
[ 22.413996] [drm] radeon: GTT 512M
[ 22.413999] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 22.415259] [drm] radeon: irq initialized.
[ 22.415353] [TTM] TTM available graphics memory: 501 MiB
[ 22.415357] [TTM] TTM available object memory: 501 MiB
[ 22.415379] [drm] radeon: 256M of VRAM memory ready
[ 22.415383] [drm] radeon: 512M of GTT memory ready.
[ 22.415388] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 22.416864] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 22.416884] [drm] radeon: cp idle (0x10000C03)
[ 22.416889] [drm] Loading R500 Microcode
[ 22.417188] [drm] radeon: ring at 0x0000000020000000
[ 22.417220] [drm] ring test succeeded in 7 usecs
[ 22.417469] [drm] radeon: ib pool ready.
[ 22.417611] [drm] ib test succeeded in 0 usecs
[ 22.417919] [drm] Radeon Display Connectors
[ 22.417923] [drm] Connector 0:
[ 22.417927] [drm] DVI-I
[ 22.417932] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 22.417936] [drm] Encoders:
[ 22.417939] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 22.417943] [drm] DFP3: INTERNAL_LVTM1
[ 22.417946] [drm] Connector 1:
[ 22.417949] [drm] DVI-I
[ 22.417954] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 22.417958] [drm] Encoders:
[ 22.417961] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 22.417965] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 22.473038] i2c-adapter i2c-1: unable to read EDID block.
[ 22.473048] radeon 0000:05:00.0: DVI-I-2: no EDID data
[ 22.568028] intel8x0_measure_ac97_clock: measured 50910 usecs (2504 samples)
[ 22.568031] intel8x0: clocking to 46844
[ 22.592942] [drm] fb mappable at 0xE00C0000
[ 22.592945] [drm] vram apper at 0xE0000000
[ 22.592947] [drm] size 5242880
[ 22.592949] [drm] fb depth is 24
[ 22.592950] [drm] pitch is 5120
[ 22.593029] fb0: radeondrmfb frame buffer device
[ 22.593032] registered panic notifier
[ 22.593034] [drm] radeon: kernel modesetting successfully initialized.
[ 22.593040] [drm] Initialized radeon 2.0.0 20080528 for 0000:05:00.0 on minor 0
[ 24.611298] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended
[ 24.612060] EXT4-fs (dm-9): internal journal on dm-9:8
[ 24.779607] XFS mounting filesystem dm-5
[ 25.020798] Ending clean XFS mount for filesystem: dm-5
[ 25.113746] REISERFS (device dm-1): found reiserfs format "3.6" with standard journal
[ 25.113814] REISERFS (device dm-1): using ordered data mode
[ 25.120435] REISERFS (device dm-1): journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 25.122715] REISERFS (device dm-1): checking transaction log (dm-1)
[ 25.173708] REISERFS (device dm-1): Using r5 hash to sort names
[ 25.268333] EXT4-fs (dm-6): barriers enabled
[ 25.279047] kjournald2 starting: pid 2969, dev dm-6:8, commit interval 5 seconds
[ 25.279064] EXT4-fs (dm-6): warning: maximal mount count reached, running e2fsck is recommended
[ 25.280742] EXT4-fs (dm-6): internal journal on dm-6:8
[ 25.280748] EXT4-fs (dm-6): delayed allocation enabled
[ 25.280754] EXT4-fs: file extents enabled
[ 25.293749] EXT4-fs: mballoc enabled
[ 25.293780] EXT4-fs (dm-6): mounted filesystem with ordered data mode
[ 25.368483] EXT4-fs (dm-8): barriers enabled
[ 25.382687] kjournald2 starting: pid 2970, dev dm-8:8, commit interval 5 seconds
[ 25.382710] EXT4-fs (dm-8): warning: maximal mount count reached, running e2fsck is recommended
[ 25.384505] EXT4-fs (dm-8): internal journal on dm-8:8
[ 25.384511] EXT4-fs (dm-8): delayed allocation enabled
[ 25.384517] EXT4-fs: file extents enabled
[ 25.398637] EXT4-fs: mballoc enabled
[ 25.398671] EXT4-fs (dm-8): mounted filesystem with ordered data mode
[ 25.459494] EXT4-fs (dm-7): barriers enabled
[ 25.473644] kjournald2 starting: pid 2971, dev dm-7:8, commit interval 5 seconds
[ 25.473668] EXT4-fs (dm-7): warning: maximal mount count reached, running e2fsck is recommended
[ 25.475498] EXT4-fs (dm-7): internal journal on dm-7:8
[ 25.475505] EXT4-fs (dm-7): delayed allocation enabled
[ 25.475510] EXT4-fs: file extents enabled
[ 25.476642] EXT4-fs: mballoc enabled
[ 25.476672] EXT4-fs (dm-7): mounted filesystem with ordered data mode
[ 25.525155] EXT4-fs (dm-4): barriers enabled
[ 25.539095] kjournald2 starting: pid 2972, dev dm-4:8, commit interval 5 seconds
[ 25.539115] EXT4-fs (dm-4): warning: maximal mount count reached, running e2fsck is recommended
[ 25.540739] EXT4-fs (dm-4): internal journal on dm-4:8
[ 25.540745] EXT4-fs (dm-4): delayed allocation enabled
[ 25.540751] EXT4-fs: file extents enabled
[ 25.541388] EXT4-fs: mballoc enabled
[ 25.541417] EXT4-fs (dm-4): mounted filesystem with ordered data mode
[ 25.553381] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 26.751972] Bluetooth: L2CAP ver 2.13
[ 26.751978] Bluetooth: L2CAP socket layer initialized
[ 26.772560] Bluetooth: RFCOMM TTY layer initialized
[ 26.772571] Bluetooth: RFCOMM socket layer initialized
[ 26.772575] Bluetooth: RFCOMM ver 1.11
[ 26.863064] Bluetooth: SCO (Voice Link) ver 0.6
[ 26.863070] Bluetooth: SCO socket layer initialized
[ 26.891396] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.891402] Bluetooth: BNEP filters: protocol multicast
[ 27.827804] ip used greatest stack depth: 4440 bytes left
[ 34.781410] usb usb2: uevent
[ 34.781528] usb 2-0:1.0: uevent
[ 34.781630] usb 2-2: uevent
[ 34.781790] usb 2-2:1.0: uevent
[ 34.781970] usb 2-2:1.1: uevent
[ 34.782069] usb 2-2:1.2: uevent
[ 34.782164] usb 2-2:1.3: uevent
[ 34.782450] usb usb1: uevent
[ 34.782560] usb 1-0:1.0: uevent
[ 36.284733] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 39.144030] eth0: no IPv6 routers present