rendered paste bodysmartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce AllenHome page is http://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===Model Family: Western Digital Caviar familyDevice Model: WDC WD1200BB-00GUA0Serial Number: WD-WMALK1129784Firmware Version: 08.02D08User Capacity: 120,034,123,776 bytesDevice is: In smartctl database [for details use: -P show]ATA Version is: 6ATA Standard is: Exact ATA specification draft version not indicatedLocal Time is: Fri Jun 9 20:46:55 2006 EDTSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: FAILED!Drive failure expected in less than 24 hours. SAVE ALL DATA.See vendor-specific Attribute list for failed Attributes.General SMART Values:Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled.Self-test execution status: ( 73) The previous self-test completed having a test element that failed and the test element that failed is not known.Total time to complete Offline data collection: (3477) seconds.Offline data collectioncapabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported. No General Purpose Logging support.Short self-test routine recommended polling time: ( 2) minutes.Extended self-test routinerecommended polling time: ( 49) minutes.Conveyance self-test routinerecommended polling time: ( 5) minutes.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 168 159 021 Pre-fail Always - 4108 4 Start_Stop_Count 0x0032 096 096 040 Old_age Always - 4713 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 20471 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 293194 Temperature_Celsius 0x0022 115 092 000 Old_age Always - 35196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0197 Current_Pending_Sector 0x0012 140 140 000 Old_age Always - 1189198 Offline_Uncorrectable 0x0012 001 113 000 Old_age Always - 47713199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 257200 Multi_Zone_Error_Rate 0x0009 001 001 051 Pre-fail Offline FAILING_NOW 65535SMART Error Log Version: 1ATA Error Count: 826 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX]Powered_Up_Time is measured from power on, and printed asDDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,SS=sec, and sss=millisec. It "wraps" after 49.710 days.Error 826 occurred at disk power-on lifetime: 20459 hours (852 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 18 c7 12 17 e0 Error: UNC 24 sectors at LBA = 0x001712c7 = 1512135 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 18 c7 12 17 06 00 00:11:48.600 READ DMA EXT 25 00 1a c5 12 17 06 00 00:11:48.600 READ DMA EXT 25 00 1c c3 12 17 06 00 00:11:48.600 READ DMA EXT 25 00 1e c1 12 17 06 00 00:11:48.600 READ DMA EXT 25 00 20 bf 12 17 06 00 00:11:48.600 READ DMA EXTError 825 occurred at disk power-on lifetime: 20459 hours (852 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 1a c5 12 17 e0 Error: UNC 26 sectors at LBA = 0x001712c5 = 1512133 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 1a c5 12 17 06 00 00:11:46.650 READ DMA EXT 25 00 1c c3 12 17 06 00 00:11:46.650 READ DMA EXT 25 00 1e c1 12 17 06 00 00:11:46.650 READ DMA EXT 25 00 20 bf 12 17 06 00 00:11:46.650 READ DMA EXT 25 00 22 bd 12 17 06 00 00:11:46.650 READ DMA EXTError 824 occurred at disk power-on lifetime: 20459 hours (852 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 1c c4 12 17 e0 Error: UNC 28 sectors at LBA = 0x001712c4 = 1512132 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 1c c3 12 17 06 00 00:11:44.700 READ DMA EXT 25 00 1e c1 12 17 06 00 00:11:44.700 READ DMA EXT 25 00 20 bf 12 17 06 00 00:11:44.700 READ DMA EXT 25 00 22 bd 12 17 06 00 00:11:44.700 READ DMA EXT 25 00 24 bb 12 17 06 00 00:11:44.700 READ DMA EXTError 823 occurred at disk power-on lifetime: 20459 hours (852 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 1e c1 12 17 e0 Error: UNC 30 sectors at LBA = 0x001712c1 = 1512129 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 1e c1 12 17 06 00 00:11:42.400 READ DMA EXT 25 00 20 bf 12 17 06 00 00:11:42.400 READ DMA EXT 25 00 22 bd 12 17 06 00 00:11:42.400 READ DMA EXT 25 00 24 bb 12 17 06 00 00:11:42.400 READ DMA EXT 25 00 26 b9 12 17 06 00 00:11:42.400 READ DMA EXTError 822 occurred at disk power-on lifetime: 20459 hours (852 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 20 bf 12 17 e0 Error: UNC 32 sectors at LBA = 0x001712bf = 1512127 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 20 bf 12 17 06 00 00:11:40.450 READ DMA EXT 25 00 22 bd 12 17 06 00 00:11:40.450 READ DMA EXT 25 00 24 bb 12 17 06 00 00:11:40.450 READ DMA EXT 25 00 26 b9 12 17 06 00 00:11:40.450 READ DMA EXT 25 00 28 b7 12 17 06 00 00:11:40.450 READ DMA EXTSMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error# 1 Short offline Completed: unknown failure 90% 20471 4293918720SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testingSelective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.