rendered paste body[17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003def0000 (usable)
[17179569.184000] BIOS-e820: 000000003def0000 - 000000003deff000 (ACPI data)
[17179569.184000] BIOS-e820: 000000003deff000 - 000000003df00000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003df00000 - 0000000040000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 94MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f80f0
[17179569.184000] On node 0 totalpages: 253680
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 24304 pages, LIFO batch:3
[17179569.184000] DMI present.
[17179569.184000] ATI board detected. Disabling timer routing over 8254.
[17179569.184000] ACPI: RSDP (v000 HP ) @ 0x000f8040
[17179569.184000] ACPI: RSDT (v001 HP 3097 0x20041209 LTP 0x00000000) @ 0x3def8ad8
[17179569.184000] ACPI: FADT (v001 HP 3097 0x20041209 PTL 0x0000005f) @ 0x3defee2a
[17179569.184000] ACPI: SSDT (v001 PTLTD POWERNOW 0x20041209 LTP 0x00000001) @ 0x3defee9e
[17179569.184000] ACPI: MADT (v001 PTLTD 3097 0x20041209 LTP 0x00000000) @ 0x3defef74
[17179569.184000] ACPI: MCFG (v001 PTLTD MCFG 0x20041209 LTP 0x00000000) @ 0x3defefc4
[17179569.184000] ACPI: DSDT (v001 HP 3091 0x20041209 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x8008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda4 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 1795.110 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.580000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.584000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179569.604000] Memory: 995380k/1014720k available (1976k kernel code, 18672k reserved, 606k data, 288k init, 97216k highmem)
[17179569.604000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.684000] Calibrating delay using timer specific routine.. 3595.34 BogoMIPS (lpj=7190684)
[17179569.684000] Security Framework v1.0.0 initialized
[17179569.684000] SELinux: Disabled at boot.
[17179569.684000] Mount-cache hash table entries: 512
[17179569.684000] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.684000] CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.684000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.684000] CPU: L2 Cache: 128K (64 bytes/line)
[17179569.684000] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179569.684000] mtrr: v2.0 (20020519)
[17179569.684000] CPU: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 02
[17179569.684000] Enabling fast FPU save and restore... done.
[17179569.684000] Enabling unmasked SIMD FPU exception support... done.
[17179569.684000] Checking 'hlt' instruction... OK.
[17179569.700000] checking if image is initramfs... it is
[17179570.244000] Freeing initrd memory: 6617k freed
[17179570.252000] ACPI: Looking for DSDT ... not found!
[17179570.256000] ENABLING IO-APIC IRQs
[17179570.256000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179570.400000] NET: Registered protocol family 16
[17179570.400000] EISA bus registered
[17179570.400000] ACPI: bus type pci registered
[17179570.400000] PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=5
[17179570.400000] PCI: Using MMCONFIG
[17179570.400000] ACPI: Subsystem revision 20051216
[17179570.400000] ACPI: Interpreter enabled
[17179570.400000] ACPI: Using IOAPIC for interrupt routing
[17179570.400000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.400000] PCI: Probing PCI hardware (bus 00)
[17179570.404000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[17179570.404000] Boot video device is 0000:01:05.0
[17179570.404000] PCI: Transparent bridge - 0000:00:14.4
[17179570.404000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.408000] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[17179570.408000] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[17179570.408000] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[17179570.408000] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[17179570.408000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[17179570.408000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[17179570.408000] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[17179570.408000] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[17179570.408000] ACPI-0351: *** Error: Looking up [UPRS] in namespace, AE_NOT_FOUND
[17179570.408000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.LPC0.LNKU._PRS] (Node dffe9b40), AE_NOT_FOUND
[17179570.408000] ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.
[17179570.412000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[17179570.412000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[17179570.412000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.412000] pnp: PnP ACPI init
[17179570.416000] pnp: PnP ACPI: found 10 devices
[17179570.416000] PnPBIOS: Disabled by ACPI PNP
[17179570.416000] PCI: Using ACPI for IRQ routing
[17179570.416000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.428000] pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
[17179570.428000] pnp: 00:07: ioport range 0x220-0x22f has been reserved
[17179570.428000] pnp: 00:07: ioport range 0x40b-0x40b has been reserved
[17179570.428000] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[17179570.428000] PCI: Bridge: 0000:00:01.0
[17179570.428000] IO window: 9000-9fff
[17179570.428000] MEM window: d0100000-d01fffff
[17179570.428000] PREFETCH window: d4000000-d7ffffff
[17179570.428000] PCI: Bus 6, cardbus bridge: 0000:05:09.0
[17179570.428000] IO window: 0000a400-0000a4ff
[17179570.428000] IO window: 0000a800-0000a8ff
[17179570.428000] PREFETCH window: 50000000-51ffffff
[17179570.428000] MEM window: 52000000-53ffffff
[17179570.428000] PCI: Bridge: 0000:00:14.4
[17179570.428000] IO window: a000-afff
[17179570.428000] MEM window: d0200000-d02fffff
[17179570.428000] PREFETCH window: 50000000-51ffffff
[17179570.428000] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 185
[17179570.428000] PCI: Setting latency timer of device 0000:05:09.0 to 64
[17179570.428000] audit: initializing netlink socket (disabled)
[17179570.428000] audit(1156960164.428:1): initialized
[17179570.428000] highmem bounce pool size: 64 pages
[17179570.428000] VFS: Disk quotas dquot_6.5.1
[17179570.428000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.428000] Initializing Cryptographic API
[17179570.428000] io scheduler noop registered
[17179570.428000] io scheduler anticipatory registered
[17179570.428000] io scheduler deadline registered
[17179570.428000] io scheduler cfq registered
[17179570.428000] isapnp: Scanning for PnP cards...
[17179570.784000] isapnp: No Plug & Play device found
[17179570.796000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[17179570.812000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.812000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.812000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179570.816000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
[17179570.816000] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[17179570.816000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.816000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.816000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.816000] mice: PS/2 mouse device common for all mice
[17179570.816000] EISA: Probing bus 0 at eisa.0
[17179570.816000] Cannot allocate resource for EISA slot 1
[17179570.816000] Cannot allocate resource for EISA slot 8
[17179570.816000] EISA: Detected 0 cards.
[17179570.816000] NET: Registered protocol family 2
[17179570.852000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.852000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.852000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.852000] TCP: Hash tables configured (established 131072 bind 65536)
[17179570.852000] TCP reno registered
[17179570.852000] TCP bic registered
[17179570.852000] NET: Registered protocol family 1
[17179570.852000] NET: Registered protocol family 8
[17179570.852000] NET: Registered protocol family 20
[17179570.852000] Using IPI Shortcut mode
[17179570.852000] ACPI wakeup devices:
[17179570.852000] KBC0 MSE0 P2P AUDO
[17179570.852000] ACPI: (supports S0 S3 S4 S5)
[17179570.852000] Freeing unused kernel memory: 288k freed
[17179570.856000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179570.908000] vga16fb: initializing
[17179570.908000] vga16fb: mapped to 0xc00a0000
[17179570.996000] Console: switching to colour frame buffer device 80x25
[17179570.996000] fb0: VGA16 VGA frame buffer device
[17179572.016000] Capability LSM initialized
[17179572.148000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179572.148000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179572.148000] ACPI: Thermal Zone [THRM] (57 C)
[17179572.808000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[17179572.808000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
[17179572.808000] ATIIXP: chipset revision 128
[17179572.808000] ATIIXP: not 100% native mode: will probe irqs later
[17179572.808000] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[17179572.808000] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[17179572.808000] Probing IDE interface ide0...
[17179573.100000] hda: TOSHIBA MK8032GAX, ATA DISK drive
[17179573.772000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179573.796000] Probing IDE interface ide1...
[17179574.532000] hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive[17179574.868000] ide1 at 0x170-0x177,0x376 on irq 15
[17179574.876000] hda: max request size: 1024KiB
[17179574.884000] hda: 156301488 sectors (80026 MB), CHS=16383/255/63, UDMA(100)[17179574.884000] hda: cache flushes supported
[17179574.888000] hda: hda1 hda2 hda3 hda4
[17179574.948000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
[17179574.948000] Uniform CD-ROM driver Revision: 3.20
[17179575.340000] usbcore: registered new driver usbfs
[17179575.340000] usbcore: registered new driver hub
[17179575.340000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179575.340000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 201
[17179575.340000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[17179575.676000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[17179575.676000] ohci_hcd 0000:00:13.0: irq 201, io mem 0xd0000000
[17179575.736000] hub 1-0:1.0: USB hub found
[17179575.736000] hub 1-0:1.0: 4 ports detected
[17179575.840000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 201
[17179575.840000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[17179576.168000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[17179576.168000] ohci_hcd 0000:00:13.1: irq 201, io mem 0xd0001000
[17179576.228000] hub 2-0:1.0: USB hub found
[17179576.228000] hub 2-0:1.0: 4 ports detected
[17179576.332000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 201
[17179576.332000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[17179576.332000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[17179576.332000] ehci_hcd 0000:00:13.2: irq 201, io mem 0xd0002000
[17179576.332000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.332000] hub 3-0:1.0: USB hub found
[17179576.332000] hub 3-0:1.0: 8 ports detected
[17179576.500000] Attempting manual resume
[17179576.532000] EXT3-fs: mounted filesystem with ordered data mode.
[17179576.540000] kjournald starting. Commit interval 5 seconds
[17179577.140000] usb 2-1: new low speed USB device using ohci_hcd and address 2[17179587.860000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179587.868000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179588.048000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.132000] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 185
[17179588.132000] Yenta: CardBus bridge found at 0000:05:09.0 [103c:3091]
[17179588.132000] Yenta: Enabling burst memory read transactions
[17179588.132000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179588.132000] Yenta: Routing CardBus interrupts to PCI
[17179588.132000] Yenta TI: socket 0000:05:09.0, mfunc 0x01a01b22, devctl 0x66
[17179588.364000] Yenta: ISA IRQ mask 0x0ef8, PCI irq 185
[17179588.364000] Socket status: 30000006
[17179588.364000] Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09
[17179588.364000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[17179588.364000] cs: IO port probe 0xa000-0xafff: clean.
[17179588.364000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[17179588.364000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
[17179588.416000] 8139too Fast Ethernet driver 0.9.27
[17179588.416000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 209
[17179588.416000] eth0: RealTek RTL8139 at 0xf889a000, 00:16:36:12:c5:db, IRQ 209
[17179588.416000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[17179588.424000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179588.608000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
[17179588.716000] MC'97 0 converters and GPIO not ready (0x1)
[17179588.732000] usbcore: registered new driver hiddev
[17179588.764000] input: Genius NetScroll + Mini Traveler as /class/input/input1[17179588.764000] input: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on usb-0000:00:13.1-1
[17179588.764000] usbcore: registered new driver usbhid
[17179588.764000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179588.820000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185
[17179588.828000] Real Time Clock Driver v1.12
[17179588.940000] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
[17179588.972000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179589.048000] ts: Compaq touchscreen protocol output
[17179589.152000] input: PC Speaker as /class/input/input3
[17179589.688000] cs: IO port probe 0x100-0x3af: clean.
[17179589.688000] cs: IO port probe 0x3e0-0x4ff: clean.
[17179589.688000] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[17179589.692000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[17179589.692000] cs: IO port probe 0xa00-0xaff: clean.
[17179590.036000] lp: driver loaded but no devices found
[17179590.076000] ndiswrapper version 1.8 loaded (preempt=yes,smp=no)
[17179590.144000] ndiswrapper: driver bcmwl5 (Broadcom,12/22/2004, 3.100.46.0) loaded
[17179590.144000] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 20 (level, low) -> IRQ 217
[17179590.152000] ndiswrapper: using irq 217
[17179591.432000] wlan0: vendor: ''
[17179591.432000] wlan0: ndiswrapper ethernet device 00:14:a5:64:c2:13 using driver bcmwl5, 14E4:4318.5.conf
[17179591.432000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[17179591.500000] Adding 1052248k swap on /dev/hda3. Priority:-1 extents:1 across:1052248k
[17179591.728000] EXT3 FS on hda4, internal journal
[17179591.932000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179591.932000] md: bitmap version 4.39
[17179592.480000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179592.816000] NET: Registered protocol family 17
[17179593.360000] hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
[17179593.360000] hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[17179593.360000] ide: failed opcode was: unknown
[17179593.364000] cdrom: open failed.
[17179593.820000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179593.880000] NTFS volume version 3.1.
[17179593.936000] FAT: bogus number of reserved sectors
[17179593.936000] VFS: Can't find a valid FAT filesystem on dev hda2.
[17179595.152000] ACPI: AC Adapter [ACAD] (on-line)
[17179595.236000] ACPI: Battery Slot [BAT1] (battery present)
[17179595.320000] ACPI: Power Button (FF) [PWRF]
[17179595.320000] ACPI: Power Button (CM) [PWRB]
[17179595.320000] ACPI: Sleep Button (CM) [SLPB]
[17179595.320000] ACPI: Lid Switch [LID]
[17179595.416000] ibm_acpi: ec object not found
[17179595.448000] pcc_acpi: loading...
[17179595.492000] wmi_add device=dfe3a400
[17179595.492000] calling WQBA
[17179595.548000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179596.004000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[17179596.004000] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
[17179596.004000] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc (1250 mV)
[17179596.004000] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13 (1075 mV)
[17179596.004000] cpu_init done, current fid 0xa, vid 0xa
[17179600.884000] [drm] Initialized drm 1.0.1 20051102
[17179601.784000] ppdev: user-space parallel port driver
[17179602.992000] apm: BIOS not found.
[17179608.856000] NET: Registered protocol family 10
[17179608.860000] lo: Disabled Privacy Extensions
[17179608.860000] IPv6 over IPv4 tunneling driver
[17179612.716000] Bluetooth: Core ver 2.8
[17179612.716000] NET: Registered protocol family 31
[17179612.716000] Bluetooth: HCI device and connection manager initialized
[17179612.716000] Bluetooth: HCI socket layer initialized
[17179612.752000] Bluetooth: L2CAP ver 2.8
[17179612.752000] Bluetooth: L2CAP socket layer initialized
[17179612.760000] Bluetooth: RFCOMM socket layer initialized
[17179612.760000] Bluetooth: RFCOMM TTY layer initialized
[17179612.760000] Bluetooth: RFCOMM ver 1.7
[17179619.604000] eth1: no IPv6 routers present