rendered paste bodyLinux version 2.6.15-TvDock (william@SVN-server) (gcc version 4.0.4) #2 PREEMPT Mon Sep 15 20:20:41 CST 2008
Configured for SMP863x (revision ES6+/RevA+), detected SMP8635 (revision ES9/RevC).
Detected CPU/System/DSP Frequencies: 297.00/198.00/297.00MHz
SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Valid MEMCFG found at 0x10000fc0.
CPU revision is: 00019069
Determined physical RAM map:
memory: 06fe0000 @ 10020000 (usable)
On node 0 totalpages: 94208
DMA zone: 94208 pages, LIFO batch:31
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
Built 1 zonelists
Kernel command line: console=ttyS0
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 2048 (order: 11, 32768 bytes)
Using 148.500 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 107776k/114560k available (2635k kernel code, 6776k reserved, 392k data, 252k init, 0k highmem)
Calibrating delay loop... 292.86 BogoMIPS (lpj=146432)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x04000000.
PCI: Initializing SMP863x/SMP865x PCI host controller
PCI: Remapped PCI I/O space 0x58000000 to 0xc4020000, size 64 kB
PCI: Remapped PCI config space 0x50000000 to 0xc4004000, size 10 kB
PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
PCI: Region size is 16384KB
PCI: Map DMA memory 0x10020000-0x17000000 for PCI at 0x11000000
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Created /proc/cpucache_info entry.
NTFS driver 2.1.25 [Flags: R/O].
fuse init (API version 7.3)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
SMP86xx ir (254:0): driver loaded (wait_period = 300ms, buffer_size = 2)
SMP86xx led_rst (253:0): driver loaded.
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
loop: loaded (max 8 devices)
physmap flash device CS2: 1000000 at 48000000
CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Using physmap partition definition
Adding partition #1-#5
Creating 5 MTD partitions on "CS2: Physically mapped flash":
0x00000000-0x00060000 : "CS2-Part1"
0x00060000-0x00280000 : "CS2-Part2"
0x00280000-0x00fc0000 : "CS2-Part3"
0x00fc0000-0x00fe0000 : "CS2-Part4"
0x00fe0000-0x01000000 : "CS2-Part5"
physmap flash device CS3: 4000000 at 4c000000
CFI: Found no CS3: Physically mapped flash device at location zero
driver tangox-ehci-hcd, 10 Dec 2004
TangoX USB initializing...
tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
TangoX USB was initialized.
Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using tangox-ehci-hcd and address 2
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 252k freed
Vendor: CBM Model: Flash Disk Rev: 5.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 2034176 512-byte hdwr sectors (1041 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 2034176 512-byte hdwr sectors (1041 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
Buffer I/O error on device sda1, logical block 256224
Buffer I/O error on device sda1, logical block 256224
cdrom: no version for "struct_module" found: kernel tainted.
cdrom: No versions for exported symbols. Tainting kernel.
llad: module license 'LGPL' taints kernel.
em8xxx [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1463] init_module: begun
em8xxx0 [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1346] identify: board as unknown subid
em8xxx [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1449] identify: device 0x8635 0x86 accepted with software tango2revC
mumk_register_tasklet: (0) tasklet c403f000 status @c938aa24
em8xxx [/home/andy/WDTV/house_1_02_10/src/libs/2.8.3.0/mrua_SMP8634_2.8.3.0_GCC4_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1581] init_module: done. Found 1 em8xxx
loop: No versions for exported symbols. Tainting kernel.
loop: loaded (max 24 devices)
attempt to access beyond end of device
loop0: rw=0, want=68, limit=8
attempt to access beyond end of device
loop0: rw=0, want=1028, limit=8
attempt to access beyond end of device
loop0: rw=0, want=12, limit=8
attempt to access beyond end of device
loop0: rw=0, want=1028, limit=8
attempt to access beyond end of device
loop0: rw=0, want=12, limit=8
attempt to access beyond end of device
loop0: rw=0, want=1252, limit=8
attempt to access beyond end of device
loop0: rw=0, want=1028, limit=8
UDF-fs: No partition found (1)
UDF-fs: No VRS found
mii: No versions for exported symbols. Tainting kernel.
usbnet: No versions for exported symbols. Tainting kernel.
usbcore: registered new driver asix
/home/Zehd/wdtv/dm9601/dm9601.c: /home/Zehd/wdtv/dm9601/dm9601.c: v0.0.6 2001/05/24 (C) 1999-2000 Petko Manolov (petkan@dce.bg)
usbcore: registered new driver dm9601
usbcore: registered new driver kaweth
usbcore: registered new driver MOSCHIP usb-ethernet driver
pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new driver rtl8150
cdc_ether: No versions for exported symbols. Tainting kernel.
usbcore: registered new driver cdc_ether
usbcore: registered new driver catc
drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
usbcore: registered new driver cdc_subset
usbcore: registered new driver net1080
usbcore: registered new driver plusb
usbcore: registered new driver rndis_host
usbcore: registered new driver gl620a
wireless_ext: No versions for exported symbols. Tainting kernel.
Loading wireless extentions module...
zd1201: Unknown symbol release_firmware
zd1201: Unknown symbol request_firmware
ZD1211B - version 2.19.2.9
usbcore: registered new driver zd1211b
arusb - version 0.0.0.999
usbcore: registered new driver Otus
rtusb init --->
usbcore: registered new driver rt2870
usbcore: registered new driver rt73
ir: Enable NEC decoder (0x00000000)
ir: Enable RC5 decoder (0x00000000)