rendered paste body[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@crested) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee1000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff
[ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x3ffffffff
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000008000 (usable)
[ 0.000000] modified: 0000000000008000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] modified: 00000000bfed0000 - 00000000bfee1000 (ACPI NVS)
[ 0.000000] modified: 00000000bfee1000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfed0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfed0000 @ 10000-15000
[ 0.000000] last_map_addr: bfed0000 end: bfed0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000
[ 0.000000] last_map_addr: 140000000 end: 140000000
[ 0.000000] RAMDISK: 7f835000 - 7ffff0cd
[ 0.000000] ACPI: RSDP 000F7AE0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT BFED3883, 007C (r1 ACRSYS ACRPRDCT 6040000 LTP 0)
[ 0.000000] ACPI: FACP BFEDDC2A, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT BFED4DB5, 8E01 (r2 INTEL CRESTLNE 6040000 MSFT 3000001)
[ 0.000000] ACPI: FACS BFEE0FC0, 0040
[ 0.000000] ACPI: APIC BFEDDD1E, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET BFEDDD86, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG BFEDDDBE, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: APIC BFEDDDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT BFEDDE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SLIC BFEDDE8A, 0176 (r1 ACRSYS ACRPRDCT 6040000 acer 0)
[ 0.000000] ACPI: SSDT BFED4AD8, 02DD (r1 SataRe SataAhci 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT BFED3EBB, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT BFED3E15, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT BFED38FF, 0516 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000b854b0] TEXT DATA BSS ==> [0000200000 - 0000b854b0]
[ 0.000000] #3 [007f835000 - 007ffff0cd] RAMDISK ==> [007f835000 - 007ffff0cd]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #6 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000]
[ 0.000000] found SMP MP-table at [ffff8800000f7b10] 000f7b10
[ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x00000008
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x000bfed0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048149
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2542 pages reserved
[ 0.000000] DMA zone: 1375 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767752 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfed0000 - 00000000bfee1000
[ 0.000000] PM: Registered nosave memory: 00000000bfee1000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027687
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2199.744 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] allocated 52428800 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000
[ 0.004000] Memory: 3978572k/5242880k available (4760k kernel code, 1050284k absent, 213080k reserved, 2540k data, 536k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.48 BogoMIPS (lpj=8798976)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20080926
[ 0.005148] ACPI: Checking initramfs for custom DSDT
[ 0.295106] Setting APIC routing to flat
[ 0.295505] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.335193] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
[ 0.336001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4400.15 BogoMIPS (lpj=8800310)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.420575] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
[ 0.420599] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.424039] Brought up 2 CPUs
[ 0.424042] Total of 2 processors activated (8799.64 BogoMIPS).
[ 0.424091] CPU0 attaching sched-domain:
[ 0.424094] domain 0: span 0-1 level MC
[ 0.424096] groups: 0 1
[ 0.424100] CPU1 attaching sched-domain:
[ 0.424102] domain 0: span 0-1 level MC
[ 0.424103] groups: 1 0
[ 0.424164] net_namespace: 1400 bytes
[ 0.424164] Booting paravirtualized kernel on bare hardware
[ 0.424256] Time: 4:40:10 Date: 08/27/09
[ 0.424256] regulator: core version 0.5
[ 0.424256] NET: Registered protocol family 16
[ 0.424256] ACPI: bus type pci registered
[ 0.424256] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.424256] PCI: MCFG area at e0000000 reserved in E820
[ 0.435913] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.435915] PCI: Using configuration type 1 for base access
[ 0.436902] ACPI: EC: Look up EC in DSDT
[ 0.441411] ACPI: BIOS _OSI(Linux) query ignored
[ 0.442717] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.940006] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 0.948415] ACPI: Interpreter enabled
[ 0.948418] ACPI: (supports S0 S3 S4 S5)
[ 0.948433] ACPI: Using IOAPIC for interrupt routing
[ 0.952700] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.952702] ACPI: EC: driver started in poll mode
[ 0.952851] ACPI: No dock devices found.
[ 0.952859] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.952941] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.952944] pci 0000:00:01.0: PME# disabled
[ 0.953030] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
[ 0.953092] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
[ 0.953161] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf3504800-0xf3504bff]
[ 0.953207] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.953212] pci 0000:00:1a.7: PME# disabled
[ 0.953266] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3500000-0xf3503fff]
[ 0.953306] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.953311] pci 0000:00:1b.0: PME# disabled
[ 0.953377] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.953381] pci 0000:00:1c.0: PME# disabled
[ 0.953453] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.953457] pci 0000:00:1c.3: PME# disabled
[ 0.953530] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.953534] pci 0000:00:1c.5: PME# disabled
[ 0.953595] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
[ 0.953657] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
[ 0.953719] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
[ 0.953786] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3504c00-0xf3504fff]
[ 0.953834] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.953839] pci 0000:00:1d.7: PME# disabled
[ 0.953997] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.954001] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.954037] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.954045] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.954052] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.954059] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.954067] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
[ 0.954137] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
[ 0.954145] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
[ 0.954152] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
[ 0.954159] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
[ 0.954167] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.954174] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf3504000-0xf35047ff]
[ 0.954194] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.954198] pci 0000:00:1f.2: PME# disabled
[ 0.954230] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.954255] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.954393] pci 0000:01:00.0: reg 10 32bit mmio: [0xf2000000-0xf2ffffff]
[ 0.954428] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.954466] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf0000000-0xf1ffffff]
[ 0.954486] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
[ 0.954506] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.954620] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.954623] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf2ffffff]
[ 0.954627] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.954686] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 0.954691] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.954698] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.954819] pci 0000:06:00.0: reg 10 64bit mmio: [0x000000-0x001fff]
[ 0.954913] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.954925] pci 0000:06:00.0: PME# disabled
[ 0.955010] pci 0000:00:1c.3: bridge io port: [0x00-0xfff]
[ 0.955014] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.955022] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.955245] pci 0000:08:00.0: reg 10 64bit mmio: [0x000000-0x00ffff]
[ 0.955373] pci 0000:08:00.0: PME# supported from D3hot D3cold
[ 0.955384] pci 0000:08:00.0: PME# disabled
[ 0.955479] pci 0000:00:1c.5: bridge io port: [0x00-0xfff]
[ 0.955483] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.955490] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.955551] pci 0000:0a:09.0: reg 10 32bit mmio: [0xf3200000-0xf32007ff]
[ 0.955599] pci 0000:0a:09.0: supports D1 D2
[ 0.955601] pci 0000:0a:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.955605] pci 0000:0a:09.0: PME# disabled
[ 0.955650] pci 0000:0a:09.1: reg 10 32bit mmio: [0xf3200800-0xf32008ff]
[ 0.955699] pci 0000:0a:09.1: supports D1 D2
[ 0.955700] pci 0000:0a:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.955705] pci 0000:0a:09.1: PME# disabled
[ 0.955746] pci 0000:0a:09.2: reg 10 32bit mmio: [0xf3200c00-0xf3200cff]
[ 0.955796] pci 0000:0a:09.2: supports D1 D2
[ 0.955797] pci 0000:0a:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.955802] pci 0000:0a:09.2: PME# disabled
[ 0.955845] pci 0000:0a:09.3: reg 10 32bit mmio: [0xf3201000-0xf32010ff]
[ 0.955895] pci 0000:0a:09.3: supports D1 D2
[ 0.955896] pci 0000:0a:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.955901] pci 0000:0a:09.3: PME# disabled
[ 0.955945] pci 0000:0a:09.4: reg 10 32bit mmio: [0xf3201400-0xf32014ff]
[ 0.955994] pci 0000:0a:09.4: supports D1 D2
[ 0.955996] pci 0000:0a:09.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.956007] pci 0000:0a:09.4: PME# disabled
[ 0.956060] pci 0000:00:1e.0: transparent bridge
[ 0.956068] pci 0000:00:1e.0: bridge 32bit mmio: [0xf3200000-0xf32fffff]
[ 0.956102] bus 00 -> node 0
[ 0.956109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.956499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.956636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.956770] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.956902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.957048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.968616] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.968732] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.968846] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.968959] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.969073] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.969186] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.969300] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.969413] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.969720] ACPI: WMI: Mapper loaded
[ 0.969755] SCSI subsystem initialized
[ 0.969755] libata version 3.00 loaded.
[ 0.969755] usbcore: registered new interface driver usbfs
[ 0.969755] usbcore: registered new interface driver hub
[ 0.969755] usbcore: registered new device driver usb
[ 0.969755] PCI: Using ACPI for IRQ routing
[ 0.969755] pci 0000:00:1c.0: BAR 7: can't allocate resource
[ 0.969755] pci 0000:00:1c.0: BAR 8: can't allocate resource
[ 0.969755] pci 0000:00:1c.0: BAR 9: can't allocate resource
[ 0.969755] pci 0000:00:1c.3: BAR 7: can't allocate resource
[ 0.969755] pci 0000:00:1c.3: BAR 8: can't allocate resource
[ 0.969755] pci 0000:00:1c.3: BAR 9: can't allocate resource
[ 0.969755] pci 0000:00:1c.5: BAR 7: can't allocate resource
[ 0.969755] pci 0000:00:1c.5: BAR 8: can't allocate resource
[ 0.969755] pci 0000:00:1c.5: BAR 9: can't allocate resource
[ 0.984009] Bluetooth: Core ver 2.13
[ 0.984020] NET: Registered protocol family 31
[ 0.984020] Bluetooth: HCI device and connection manager initialized
[ 0.984020] Bluetooth: HCI socket layer initialized
[ 0.984020] NET: Registered protocol family 8
[ 0.984020] NET: Registered protocol family 20
[ 0.984030] NetLabel: Initializing
[ 0.984031] NetLabel: domain hash size = 128
[ 0.984033] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.984044] NetLabel: unlabeled traffic allowed by default
[ 0.984072] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.984076] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.988053] AppArmor: AppArmor Filesystem Enabled
[ 0.992008] Switched to high resolution mode on CPU 0
[ 0.992631] Switched to high resolution mode on CPU 1
[ 1.000009] pnp: PnP ACPI init
[ 1.000016] ACPI: bus type pnp registered
[ 1.002151] pnp: PnP ACPI: found 11 devices
[ 1.002153] ACPI: ACPI bus type pnp unregistered
[ 1.002161] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.002163] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 1.002165] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 1.002168] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 1.002170] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.002172] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.002174] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 1.002176] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.002181] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 1.002187] system 00:06: ioport range 0x680-0x69f has been reserved
[ 1.002189] system 00:06: ioport range 0x800-0x80f has been reserved
[ 1.002191] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 1.002193] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 1.002194] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 1.002196] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 1.006892] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 1.006894] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.006897] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 1.006900] pci 0000:00:01.0: MEM window: 0xf0000000-0xf2ffffff
[ 1.006903] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 1.006907] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.006908] pci 0000:00:1c.0: IO window: disabled
[ 1.006914] pci 0000:00:1c.0: MEM window: disabled
[ 1.006918] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.006958] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[ 1.006959] pci 0000:00:1c.3: IO window: disabled
[ 1.006965] pci 0000:00:1c.3: MEM window: 0xc2000000-0xc20fffff
[ 1.006969] pci 0000:00:1c.3: PREFETCH window: disabled
[ 1.007031] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[ 1.007032] pci 0000:00:1c.5: IO window: disabled
[ 1.007038] pci 0000:00:1c.5: MEM window: 0xc2100000-0xc21fffff
[ 1.007042] pci 0000:00:1c.5: PREFETCH window: disabled
[ 1.007050] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 1.007051] pci 0000:00:1e.0: IO window: disabled
[ 1.007057] pci 0000:00:1e.0: MEM window: 0xf3200000-0xf32fffff
[ 1.007061] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.007074] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.007077] pci 0000:00:01.0: setting latency timer to 64
[ 1.007085] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.007091] pci 0000:00:1c.0: setting latency timer to 64
[ 1.007099] pci 0000:00:1c.3: enabling device (0000 -> 0002)
[ 1.007103] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.007109] pci 0000:00:1c.3: setting latency timer to 64
[ 1.007116] pci 0000:00:1c.5: enabling device (0000 -> 0002)
[ 1.007120] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.007126] pci 0000:00:1c.5: setting latency timer to 64
[ 1.007133] pci 0000:00:1e.0: setting latency timer to 64
[ 1.007137] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.007138] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 1.007140] bus: 01 index 0 io port: [0x2000-0x2fff]
[ 1.007142] bus: 01 index 1 mmio: [0xf0000000-0xf2ffffff]
[ 1.007143] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 1.007144] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.007146] bus: 02 index 0 mmio: [0x0-0xfff]
[ 1.007147] bus: 02 index 1 mmio: [0x0-0xfffff]
[ 1.007149] bus: 02 index 2 mmio: [0x0-0xfffff]
[ 1.007150] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.007151] bus: 06 index 0 mmio: [0x0-0xfff]
[ 1.007153] bus: 06 index 1 mmio: [0xc2000000-0xc20fffff]
[ 1.007154] bus: 06 index 2 mmio: [0x0-0xfffff]
[ 1.007155] bus: 06 index 3 mmio: [0x0-0x0]
[ 1.007157] bus: 08 index 0 mmio: [0x0-0xfff]
[ 1.007158] bus: 08 index 1 mmio: [0xc2100000-0xc21fffff]
[ 1.007160] bus: 08 index 2 mmio: [0x0-0xfffff]
[ 1.007161] bus: 08 index 3 mmio: [0x0-0x0]
[ 1.007162] bus: 0a index 0 mmio: [0x0-0x0]
[ 1.007164] bus: 0a index 1 mmio: [0xf3200000-0xf32fffff]
[ 1.007165] bus: 0a index 2 mmio: [0x0-0x0]
[ 1.007167] bus: 0a index 3 io port: [0x00-0xffff]
[ 1.007168] bus: 0a index 4 mmio: [0x000000-0xffffffffffffffff]
[ 1.007175] NET: Registered protocol family 2
[ 1.040046] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.040493] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.042071] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.042583] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.042585] TCP reno registered
[ 1.052100] NET: Registered protocol family 1
[ 1.052208] checking if image is initramfs... it is
[ 1.682491] Freeing initrd memory: 7976k freed
[ 1.685955] Simple Boot Flag at 0x35 set to 0x1
[ 1.686265] audit: initializing netlink socket (disabled)
[ 1.686286] type=2000 audit(1251348010.684:1): initialized
[ 1.693840] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.694908] VFS: Disk quotas dquot_6.5.1
[ 1.694953] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.695438] fuse init (API version 7.10)
[ 1.695503] msgmni has been set to 7788
[ 1.695643] alg: No test for stdrng (krng)
[ 1.695651] io scheduler noop registered
[ 1.695653] io scheduler anticipatory registered
[ 1.695654] io scheduler deadline registered
[ 1.695687] io scheduler cfq registered (default)
[ 1.695877] pci 0000:01:00.0: Boot video device
[ 1.695956] ACPI Error (psargs-0358): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.695961] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013f814b80), AE_NOT_FOUND
[ 1.696813] ACPI Error (psargs-0358): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.696817] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013f814b80), AE_NOT_FOUND
[ 1.697703] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.697734] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.697756] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.697764] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.697776] pci_express 0000:00:01.0:pcie02: allocate port service
[ 1.697786] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.697831] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.697879] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.697912] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.697927] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.697940] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.697950] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.698019] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.698067] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.698099] pcieport-driver 0000:00:1c.3: irq 2301 for MSI/MSI-X
[ 1.698115] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.698125] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.698134] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.698205] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.698253] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.698285] pcieport-driver 0000:00:1c.5: irq 2300 for MSI/MSI-X
[ 1.698300] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.698311] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 1.698323] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.698397] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.698429] ACPI Error (psargs-0358): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.698433] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013f814b80), AE_NOT_FOUND
[ 1.698609] ACPI Error (psargs-0358): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.698614] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013f814b80), AE_NOT_FOUND
[ 1.698748] ACPI Error (psargs-0358): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.698753] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013f814b80), AE_NOT_FOUND
[ 1.698886] ACPI Error (psargs-0358): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.698891] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013f814b80), AE_NOT_FOUND
[ 1.699006] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.699901] ACPI: AC Adapter [ACAD] (on-line)
[ 1.699972] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.700033] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.700035] ACPI: Power Button (FF) [PWRF]
[ 1.700085] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.700154] ACPI: Lid Switch [LID]
[ 1.700189] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.700191] ACPI: Power Button (CM) [PWRB]
[ 1.700228] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.700230] ACPI: Sleep Button (CM) [SLPB]
[ 1.700790] ACPI: SSDT BFED4796, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 1.701257] ACPI: SSDT BFED411A, 05F7 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 1.703533] Monitor-Mwait will be used to enter C-1 state
[ 1.703535] Monitor-Mwait will be used to enter C-2 state
[ 1.703537] Monitor-Mwait will be used to enter C-3 state
[ 1.703548] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.703569] processor ACPI_CPU:00: registered as cooling_device0
[ 1.703572] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.703913] ACPI: SSDT BFED4A10, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 1.704256] ACPI: SSDT BFED4711, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 1.705183] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.705199] processor ACPI_CPU:01: registered as cooling_device1
[ 1.705202] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.709553] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.712063] ACPI: Thermal Zone [THRM] (57 C)
[ 1.749209] Linux agpgart interface v0.103
[ 1.749216] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.750041] brd: module loaded
[ 1.750301] loop: module loaded
[ 1.750355] Fixed MDIO Bus: probed
[ 1.750359] PPP generic driver version 2.4.2
[ 1.750409] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.750430] Driver 'sd' needs updating - please use bus_type methods
[ 1.750438] Driver 'sr' needs updating - please use bus_type methods
[ 1.750472] ahci 0000:00:1f.2: version 3.0
[ 1.750484] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.750520] ahci 0000:00:1f.2: irq 2299 for MSI/MSI-X
[ 1.750584] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.750587] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 1.750592] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.750814] scsi0 : ahci
[ 1.750886] scsi1 : ahci
[ 1.750936] scsi2 : ahci
[ 1.751017] ata1: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504100 irq 2299
[ 1.751020] ata2: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504180 irq 2299
[ 1.751023] ata3: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504200 irq 2299
[ 2.068020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.068568] ACPI Warning (nspredef-0852): \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20080926]
[ 2.068573] ata1.00: _GTF unexpected object type 0x1
[ 2.344718] ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
[ 2.344720] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.345544] ata1.00: _GTF unexpected object type 0x1
[ 2.345659] ata1.00: configured for UDMA/133
[ 2.680016] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.016016] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.032093] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5
[ 3.032167] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 3.032181] sd 0:0:0:0: [sda] Write Protect is off
[ 3.032183] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.032205] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.032257] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 3.032269] sd 0:0:0:0: [sda] Write Protect is off
[ 3.032271] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.032291] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.032294] sda: sda1 sda2 < sda5 >
[ 3.102063] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.102102] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.102144] ata_piix 0000:00:1f.1: version 2.12
[ 3.102151] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.102182] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.102254] scsi3 : ata_piix
[ 3.102303] scsi4 : ata_piix
[ 3.102904] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 3.102906] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 3.280414] ata4.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33
[ 3.312363] ata4.00: configured for UDMA/33
[ 3.481628] scsi 3:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5
[ 3.484658] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.484660] Uniform CD-ROM driver Revision: 3.20
[ 3.484729] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.484761] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.485275] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.485293] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.485306] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.485309] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.485359] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.489264] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.489271] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.489282] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3504800
[ 3.504008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.504069] usb usb1: configuration #1 chosen from 1 choice
[ 3.504090] hub 1-0:1.0: USB hub found
[ 3.504097] hub 1-0:1.0: 4 ports detected
[ 3.504187] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.504196] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.504199] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.504233] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.508128] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.508134] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.508146] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3504c00
[ 3.524009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.524061] usb usb2: configuration #1 chosen from 1 choice
[ 3.524081] hub 2-0:1.0: USB hub found
[ 3.524086] hub 2-0:1.0: 6 ports detected
[ 3.524167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.524179] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.524195] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.524201] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.524204] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.524245] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.524278] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 3.524341] usb usb3: configuration #1 chosen from 1 choice
[ 3.524363] hub 3-0:1.0: USB hub found
[ 3.524368] hub 3-0:1.0: 2 ports detected
[ 3.524446] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.524452] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.524455] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.524487] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.524519] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 3.524583] usb usb4: configuration #1 chosen from 1 choice
[ 3.524602] hub 4-0:1.0: USB hub found
[ 3.524607] hub 4-0:1.0: 2 ports detected
[ 3.524678] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.524684] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.524687] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.524720] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.524746] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 3.524808] usb usb5: configuration #1 chosen from 1 choice
[ 3.524827] hub 5-0:1.0: USB hub found
[ 3.524833] hub 5-0:1.0: 2 ports detected
[ 3.524903] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.524909] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.524912] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.524954] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.524986] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 3.525047] usb usb6: configuration #1 chosen from 1 choice
[ 3.525069] hub 6-0:1.0: USB hub found
[ 3.525074] hub 6-0:1.0: 2 ports detected
[ 3.525141] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.525146] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.525149] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.525186] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.525213] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 3.525275] usb usb7: configuration #1 chosen from 1 choice
[ 3.525298] hub 7-0:1.0: USB hub found
[ 3.525304] hub 7-0:1.0: 2 ports detected
[ 3.525410] usbcore: registered new interface driver libusual
[ 3.525438] usbcore: registered new interface driver usbserial
[ 3.525447] USB Serial support registered for generic
[ 3.525459] usbcore: registered new interface driver usbserial_generic
[ 3.525460] usbserial: USB Serial Driver core
[ 3.525504] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.527152] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.528425] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.528429] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.528431] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.528433] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.528435] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.540030] mice: PS/2 mouse device common for all mice
[ 3.600059] rtc_cmos 00:07: RTC can wake from S4
[ 3.600088] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.600118] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.600162] device-mapper: uevent: version 1.0.3
[ 3.600229] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.600283] device-mapper: multipath: version 1.0.5 loaded
[ 3.600285] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.600410] cpuidle: using governor ladder
[ 3.600500] cpuidle: using governor menu
[ 3.600836] TCP cubic registered
[ 3.600891] NET: Registered protocol family 10
[ 3.601211] lo: Disabled Privacy Extensions
[ 3.601450] NET: Registered protocol family 17
[ 3.601465] Bluetooth: L2CAP ver 2.11
[ 3.601467] Bluetooth: L2CAP socket layer initialized
[ 3.601469] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.601470] Bluetooth: SCO socket layer initialized
[ 3.601496] Bluetooth: RFCOMM socket layer initialized
[ 3.601501] Bluetooth: RFCOMM TTY layer initialized
[ 3.601502] Bluetooth: RFCOMM ver 1.10
[ 3.601539] Marking TSC unstable due to TSC halts in idle
[ 3.602236] registered taskstats version 1
[ 3.602338] Magic number: 5:595:667
[ 3.602440] rtc_cmos 00:07: setting system clock to 2009-08-27 04:40:13 UTC (1251348013)
[ 3.602443] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.602444] EDD information not available.
[ 3.602486] Freeing unused kernel memory: 536k freed
[ 3.602688] Write protecting the kernel read-only data: 6708k
[ 3.629645] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.817838] tg3.c:v3.94 (August 14, 2008)
[ 3.817908] tg3 0000:08:00.0: enabling device (0000 -> 0002)
[ 3.817920] tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.817944] tg3 0000:08:00.0: setting latency timer to 64
[ 3.829022] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 3.862195] eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1b:24:79:1e:43
[ 3.862198] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 3.862199] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.903910] ohci1394 0000:0a:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.955633] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.986042] usb 1-2: configuration #1 chosen from 1 choice
[ 4.360098] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 4.546762] usb 6-1: configuration #1 chosen from 1 choice
[ 4.552783] usbcore: registered new interface driver hiddev
[ 4.583760] input: Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input6
[ 4.604117] generic-usb 0003:045E:00D2.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel] on usb-0000:00:1d.1-1/input0
[ 4.604138] usbcore: registered new interface driver usbhid
[ 4.604142] usbhid: v2.6:USB HID core driver
[ 5.001021] Clocksource tsc unstable (delta = -409995814 ns)
[ 5.300188] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc00079563400]
[ 5.982238] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 6.014176] ISO 9660 Extensions: RRIP_1991A
[ 6.276127] aufs 20080922
[ 6.494993] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 60.344611] udev: starting version 141
[ 60.672380] acpi device:04: registered as cooling_device2
[ 60.672808] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input7
[ 60.700168] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 61.156102] cfg80211: Calling CRDA to update world regulatory domain
[ 61.438638] iTCO_vendor_support: vendor-support=0
[ 62.562099] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 63.334470] sdhci: Secure Digital Host Controller Interface driver
[ 63.334472] sdhci: Copyright(c) Pierre Ossman
[ 63.336155] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 63.336158] ricoh-mmc: Copyright(c) Philip Langdale
[ 63.336192] ricoh-mmc: Ricoh MMC controller found at 0000:0a:09.2 [1180:0843] (rev 12)
[ 63.336209] ricoh-mmc: Controller is now disabled.
[ 63.476711] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 63.566575] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 63.567041] acer-wmi: Brightness must be controlled by generic video driver
[ 63.567087] acer-wmi: software RFKILL enabled
[ 63.602026] cfg80211: World regulatory domain updated:
[ 63.602028] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 63.602030] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 63.602032] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 63.602034] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 63.602035] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 63.602037] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 63.604320] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 63.604426] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 63.604487] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 63.674828] sdhci-pci 0000:0a:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 63.674846] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 63.675881] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 63.677990] mmc0: SDHCI controller on PCI [0000:0a:09.1] using DMA
[ 63.735542] Linux video capture interface: v2.00
[ 63.767259] mmc0: error -110 whilst initialising SD card
[ 63.980067] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 63.980071] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 63.980191] iwlagn 0000:06:00.0: enabling device (0000 -> 0002)
[ 63.980206] iwlagn 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 63.980237] iwlagn 0000:06:00.0: setting latency timer to 64
[ 63.980307] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 64.023176] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 64.023251] iwlagn 0000:06:00.0: irq 2298 for MSI/MSI-X
[ 64.024232] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 64.157140] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
[ 64.158102] input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
[ 64.172193] usbcore: registered new interface driver uvcvideo
[ 64.172228] USB Video Class driver (v0.1.0)
[ 64.188058] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 64.355305] usb 7-1: configuration #1 chosen from 1 choice
[ 64.408974] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: 0xc04751/0xe0500f
[ 64.411068] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 64.411174] usbcore: registered new interface driver btusb
[ 64.447474] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
[ 64.551489] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 64.692752] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 64.692843] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 65.380519] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000
[ 65.415053] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 75.353914] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 75.353916] Bluetooth: BNEP filters: protocol multicast
[ 75.439373] Bridge firewalling registered
[ 83.522473] lp: driver loaded but no devices found
[ 83.573282] ppdev: user-space parallel port driver
[ 86.104541] tg3 0000:08:00.0: irq 2297 for MSI/MSI-X
[ 86.317099] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 86.337638] iwlagn 0000:06:00.0: firmware: requesting iwlwifi-4965-2.ucode
[ 87.444172] Registered led device: iwl-phy0:radio
[ 87.444199] Registered led device: iwl-phy0:assoc
[ 87.444222] Registered led device: iwl-phy0:RX
[ 87.444245] Registered led device: iwl-phy0:TX
[ 87.482377] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 213.595892] mmc0: error -110 whilst initialising SD card
[ 1036.522811] mmc0: new MMC card at address 0001
[ 1039.731395] mmcblk0: mmc0:0001 000000 61.2 MiB
[ 1039.731496] mmcblk0: p1
[ 1143.020265] mmc0: card 0001 removed
[ 1143.022448] mmcblk0: error -123 sending read/write command
[ 1143.034490] mmcblk0: error -123 requesting status
[ 1143.034498] end_request: I/O error, dev mmcblk0, sector 658
[ 1143.034506] Buffer I/O error on device mmcblk0p1, logical block 530
[ 1143.034511] lost page write due to I/O error on mmcblk0p1
[ 1164.807874] mmc0: error -110 whilst initialising SD card
[ 1272.995908] mmc0: error -110 whilst initialising SD card
[ 1472.113144] CE: hpet increasing min_delta_ns to 15000 nsec