rendered paste body[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@crested) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] Command line: root=UUID=3921c226-3ba2-43e1-bf38-e598889e4a8a ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b7ef0000 (usable)
[ 0.000000] BIOS-e820: 00000000b7ef0000 - 00000000b7ef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b7ef3000 - 00000000b7f00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b8000000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff
[ 0.000000] last_pfn = 0xb7ef0 max_arch_pfn = 0x3ffffffff
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000b7ef0000 (usable)
[ 0.000000] modified: 00000000b7ef0000 - 00000000b7ef3000 (ACPI NVS)
[ 0.000000] modified: 00000000b7ef3000 - 00000000b7f00000 (ACPI data)
[ 0.000000] modified: 00000000b8000000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b7ef0000
[ 0.000000] 0000000000 - 00b7e00000 page 2M
[ 0.000000] 00b7e00000 - 00b7ef0000 page 4k
[ 0.000000] kernel direct mapping tables up to b7ef0000 @ 10000-15000
[ 0.000000] last_map_addr: b7ef0000 end: b7ef0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000
[ 0.000000] last_map_addr: 140000000 end: 140000000
[ 0.000000] RAMDISK: 3785a000 - 37fef4fc
[ 0.000000] ACPI: RSDP 000F80B0, 0014 (r0 Shuttl)
[ 0.000000] ACPI: RSDT B7EF3000, 003C (r1 Shuttl Shuttle 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP B7EF3080, 0074 (r1 Shuttl Shuttle 42302E31 AWRD 0)
[ 0.000000] ACPI Warning (tbfadt-0460): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080926]
[ 0.000000] ACPI: DSDT B7EF3100, AC0A (r1 SHUTTL SN78SV10 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS B7EF1900, 0040
[ 0.000000] ACPI: SSDT B7EFDE00, 0751 (r1 PTLTD POWERNOW 1 LTP 1)
[ 0.000000] ACPI: HPET B7EFE580, 0038 (r1 Shuttl Shuttle 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG B7EFE5C0, 003C (r1 Shuttl Shuttle 42302E31 AWRD 0)
[ 0.000000] ACPI: SLIC B7EFE600, 0176 (r1 Shuttl Shuttle 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC B7EFDD40, 008E (r1 Shuttl Shuttle 42302E31 AWRD 0)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000b854b0] TEXT DATA BSS ==> [0000200000 - 0000b854b0]
[ 0.000000] #3 [003785a000 - 0037fef4fc] RAMDISK ==> [003785a000 - 0037fef4fc]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #6 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000]
[ 0.000000] found SMP MP-table at [ffff8800000f3e60] 000f3e60
[ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b7ef0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1015423
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2543 pages reserved
[ 0.000000] DMA zone: 1384 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 735016 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b7ef0000 - 00000000b7ef3000
[ 0.000000] PM: Registered nosave memory: 00000000b7ef3000 - 00000000b7f00000
[ 0.000000] PM: Registered nosave memory: 00000000b7f00000 - 00000000b8000000
[ 0.000000] PM: Registered nosave memory: 00000000b8000000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 994960
[ 0.000000] Kernel command line: root=UUID=3921c226-3ba2-43e1-bf38-e598889e4a8a ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2699.480 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] allocated 52428800 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 20000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 3848188k/5242880k available (4760k kernel code, 1181188k absent, 212580k reserved, 2540k data, 536k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5398.95 BogoMIPS (lpj=10797904)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] tseg: 00b7f00000
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using C1E aware idle routine
[ 0.004000] ACPI: Core revision 20080926
[ 0.004972] ACPI: Checking initramfs for custom DSDT
[ 0.216041] Setting APIC routing to flat
[ 0.216540] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.256338] CPU0: AMD Athlon(tm) 7750 Dual-Core Processor stepping 03
[ 0.260001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5400.04 BogoMIPS (lpj=10800090)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.344346] CPU1: AMD Athlon(tm) 7750 Dual-Core Processor stepping 03
[ 0.344356] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.348028] Brought up 2 CPUs
[ 0.348030] Total of 2 processors activated (10798.99 BogoMIPS).
[ 0.348112] CPU0 attaching sched-domain:
[ 0.348114] domain 0: span 0-1 level CPU
[ 0.348116] groups: 0 1
[ 0.348119] CPU1 attaching sched-domain:
[ 0.348120] domain 0: span 0-1 level CPU
[ 0.348122] groups: 1 0
[ 0.348165] net_namespace: 1400 bytes
[ 0.348165] Booting paravirtualized kernel on bare hardware
[ 0.348227] Time: 17:34:15 Date: 08/17/09
[ 0.348227] regulator: core version 0.5
[ 0.348227] NET: Registered protocol family 16
[ 0.348227] node 0 link 0: io port [9000, ffff]
[ 0.348227] TOM: 00000000c0000000 aka 3072M
[ 0.348227] Fam 10h mmconf [f0000000, f00fffff]
[ 0.348227] node 0 link 0: mmio [a0000, bffff]
[ 0.348227] node 0 link 0: mmio [c0000000, efffffff]
[ 0.348227] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.348227] node 0 link 0: mmio [f0000000, f03fffff] ==> [f0100000, f03fffff]
[ 0.348227] TOM2: 0000000140000000 aka 5120M
[ 0.348227] bus: [00,04] on node 0 link 0
[ 0.348227] bus: 00 index 0 io port: [0, ffff]
[ 0.348227] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.348227] bus: 00 index 2 mmio: [c0000000, efffffff]
[ 0.348227] bus: 00 index 3 mmio: [f0400000, ffffffff]
[ 0.348227] bus: 00 index 4 mmio: [f0100000, f03fffff]
[ 0.348227] bus: 00 index 5 mmio: [140000000, fcffffffff]
[ 0.348227] ACPI: bus type pci registered
[ 0.348249] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.348251] PCI: MCFG area at f0000000 reserved in E820
[ 0.350491] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.350492] PCI: Using configuration type 1 for base access
[ 0.352759] ACPI: EC: Look up EC in DSDT
[ 0.366454] ACPI: Interpreter enabled
[ 0.366457] ACPI: (supports S0 S3 S4 S5)
[ 0.366471] ACPI: Using IOAPIC for interrupt routing
[ 0.384610] ACPI: No dock devices found.
[ 0.384620] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.384857] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f]
[ 0.384867] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.384870] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.384880] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.384884] pci 0000:00:01.1: PME# disabled
[ 0.384935] pci 0000:00:01.3: reg 10 32bit mmio: [0xfdf80000-0xfdffffff]
[ 0.385047] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.385064] pci 0000:00:02.0: supports D1 D2
[ 0.385065] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385067] pci 0000:00:02.0: PME# disabled
[ 0.385086] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.385104] pci 0000:00:02.1: supports D1 D2
[ 0.385106] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385108] pci 0000:00:02.1: PME# disabled
[ 0.385131] pci 0000:00:04.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.385147] pci 0000:00:04.0: supports D1 D2
[ 0.385148] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385150] pci 0000:00:04.0: PME# disabled
[ 0.385170] pci 0000:00:04.1: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
[ 0.385188] pci 0000:00:04.1: supports D1 D2
[ 0.385189] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385191] pci 0000:00:04.1: PME# disabled
[ 0.385221] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 0.385250] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe020000-0xfe023fff]
[ 0.385267] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.385269] pci 0000:00:07.0: PME# disabled
[ 0.385311] pci 0000:00:09.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.385313] pci 0000:00:09.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.385316] pci 0000:00:09.0: reg 18 io port: [0x970-0x977]
[ 0.385319] pci 0000:00:09.0: reg 1c io port: [0xb70-0xb73]
[ 0.385321] pci 0000:00:09.0: reg 20 io port: [0xdc00-0xdc0f]
[ 0.385324] pci 0000:00:09.0: reg 24 32bit mmio: [0xfe026000-0xfe027fff]
[ 0.385350] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.385353] pci 0000:00:0a.0: reg 14 io port: [0xd800-0xd807]
[ 0.385356] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfe02a000-0xfe02a0ff]
[ 0.385359] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfe029000-0xfe02900f]
[ 0.385368] pci 0000:00:0a.0: supports D1 D2
[ 0.385369] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385372] pci 0000:00:0a.0: PME# disabled
[ 0.385393] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385395] pci 0000:00:0b.0: PME# disabled
[ 0.385533] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385540] pci 0000:00:10.0: PME# disabled
[ 0.385706] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385713] pci 0000:00:12.0: PME# disabled
[ 0.385835] pci 0000:01:08.0: reg 10 32bit mmio: [0xfdeff000-0xfdeff7ff]
[ 0.385840] pci 0000:01:08.0: reg 14 32bit mmio: [0xfdef8000-0xfdefbfff]
[ 0.385863] pci 0000:01:08.0: supports D1 D2
[ 0.385864] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot
[ 0.385867] pci 0000:01:08.0: PME# disabled
[ 0.385883] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfdefc000-0xfdefdfff]
[ 0.385923] pci 0000:00:08.0: transparent bridge
[ 0.385925] pci 0000:00:08.0: bridge io port: [0xc000-0xcfff]
[ 0.385928] pci 0000:00:08.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.385930] pci 0000:00:08.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.385944] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.385948] pci 0000:02:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff]
[ 0.385952] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe6000000-0xe7ffffff]
[ 0.385955] pci 0000:02:00.0: reg 24 io port: [0xbc00-0xbc7f]
[ 0.385958] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.385976] pci 0000:00:0b.0: bridge io port: [0xb000-0xbfff]
[ 0.385978] pci 0000:00:0b.0: bridge 32bit mmio: [0xfb000000-0xfcffffff]
[ 0.385980] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd8000000-0xe7ffffff]
[ 0.386029] pci 0000:00:10.0: bridge io port: [0xa000-0xafff]
[ 0.386036] pci 0000:00:10.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.386049] pci 0000:00:10.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.386099] pci 0000:00:12.0: bridge io port: [0x9000-0x9fff]
[ 0.386106] pci 0000:00:12.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.386119] pci 0000:00:12.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
[ 0.386147] bus 00 -> node 0
[ 0.386152] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.386600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.542731] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.542968] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
[ 0.543212] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
[ 0.543455] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.543698] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.543943] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.544193] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.544436] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.544679] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.544922] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.545164] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.545407] ACPI: PCI Interrupt Link [LE1D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.545651] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.545894] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.546137] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.546381] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.546624] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.546867] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.547110] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.547354] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.547597] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.547841] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.548090] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.548324] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.548567] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.548811] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.549054] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.549298] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.549544] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.549789] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.550037] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.550281] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.550525] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.550769] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.551013] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.551257] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.551501] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.551747] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 *7 9 10 11 14 15)
[ 0.551991] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[ 0.552242] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[ 0.552489] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 *11 14 15)
[ 0.552733] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 *7 9 10 11 14 15)
[ 0.552978] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.553222] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.553466] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15)
[ 0.553710] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15)
[ 0.553953] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.554199] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.554477] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.554741] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.555002] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.555263] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.555525] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled.
[ 0.555787] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
[ 0.556056] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
[ 0.556320] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
[ 0.556582] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0, disabled.
[ 0.556844] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
[ 0.557105] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0, disabled.
[ 0.557368] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0, disabled.
[ 0.557628] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
[ 0.557889] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
[ 0.558151] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
[ 0.558413] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
[ 0.558674] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
[ 0.558936] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
[ 0.559198] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
[ 0.559459] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
[ 0.559721] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0, disabled.
[ 0.559982] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
[ 0.560250] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
[ 0.560514] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
[ 0.560776] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
[ 0.561038] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
[ 0.561299] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
[ 0.561561] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
[ 0.561823] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
[ 0.562085] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
[ 0.562348] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
[ 0.562612] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
[ 0.562876] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
[ 0.563139] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
[ 0.563401] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
[ 0.563664] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
[ 0.563926] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.564192] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[ 0.564455] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
[ 0.564717] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
[ 0.564979] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
[ 0.565241] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.565503] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[ 0.565766] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.566030] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.566293] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.566556] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.566818] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.567011] ACPI: WMI: Mapper loaded
[ 0.567047] SCSI subsystem initialized
[ 0.567047] libata version 3.00 loaded.
[ 0.567047] usbcore: registered new interface driver usbfs
[ 0.567047] usbcore: registered new interface driver hub
[ 0.567047] usbcore: registered new device driver usb
[ 0.567047] PCI: Using ACPI for IRQ routing
[ 0.576008] Bluetooth: Core ver 2.13
[ 0.576017] NET: Registered protocol family 31
[ 0.576017] Bluetooth: HCI device and connection manager initialized
[ 0.576017] Bluetooth: HCI socket layer initialized
[ 0.576017] NET: Registered protocol family 8
[ 0.576017] NET: Registered protocol family 20
[ 0.576024] NetLabel: Initializing
[ 0.576025] NetLabel: domain hash size = 128
[ 0.576026] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.576035] NetLabel: unlabeled traffic allowed by default
[ 0.576215] PCI-DMA: Disabling AGP.
[ 0.576274] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.576276] PCI-DMA: using GART IOMMU.
[ 0.576279] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.577568] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.577573] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.580061] AppArmor: AppArmor Filesystem Enabled
[ 0.584009] Switched to high resolution mode on CPU 0
[ 0.584389] Switched to high resolution mode on CPU 1
[ 0.592015] pnp: PnP ACPI init
[ 0.592030] ACPI: bus type pnp registered
[ 0.601247] pnp: PnP ACPI: found 10 devices
[ 0.601249] ACPI: ACPI bus type pnp unregistered
[ 0.601256] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.601259] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.601261] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.601262] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.601264] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.601266] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.601268] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
[ 0.601271] system 00:01: iomem range 0xb8000000-0xbfffffff has been reserved
[ 0.601275] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.601277] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.601278] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.601283] system 00:08: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.601287] system 00:09: iomem range 0xf0000-0xfffff could not be reserved
[ 0.601288] system 00:09: iomem range 0xfeff0000-0xfeff00ff has been reserved
[ 0.601290] system 00:09: iomem range 0xb7ef0000-0xb7efffff could not be reserved
[ 0.601292] system 00:09: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.601294] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[ 0.601296] system 00:09: iomem range 0x100000-0xb7eeffff could not be reserved
[ 0.601298] system 00:09: iomem range 0xb8000000-0xbfffffff has been reserved
[ 0.601300] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.601302] system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.601304] system 00:09: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.601306] system 00:09: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.601308] system 00:09: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.601310] system 00:09: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.605950] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.605953] pci 0000:00:08.0: IO window: 0xc000-0xcfff
[ 0.605956] pci 0000:00:08.0: MEM window: 0xfde00000-0xfdefffff
[ 0.605959] pci 0000:00:08.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.605964] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.605966] pci 0000:00:0b.0: IO window: 0xb000-0xbfff
[ 0.605968] pci 0000:00:0b.0: MEM window: 0xfb000000-0xfcffffff
[ 0.605970] pci 0000:00:0b.0: PREFETCH window: 0x000000d8000000-0x000000e7ffffff
[ 0.605973] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 0.605977] pci 0000:00:10.0: IO window: 0xa000-0xafff
[ 0.605986] pci 0000:00:10.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.605993] pci 0000:00:10.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.606004] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
[ 0.606009] pci 0000:00:12.0: IO window: 0x9000-0x9fff
[ 0.606017] pci 0000:00:12.0: MEM window: 0xfda00000-0xfdafffff
[ 0.606024] pci 0000:00:12.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[ 0.606039] pci 0000:00:08.0: setting latency timer to 64
[ 0.606043] pci 0000:00:0b.0: setting latency timer to 64
[ 0.606438] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
[ 0.606445] pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
[ 0.606453] pci 0000:00:10.0: setting latency timer to 64
[ 0.606836] ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16
[ 0.606839] pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16
[ 0.606846] pci 0000:00:12.0: setting latency timer to 64
[ 0.606851] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.606852] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.606854] bus: 01 index 0 io port: [0xc000-0xcfff]
[ 0.606856] bus: 01 index 1 mmio: [0xfde00000-0xfdefffff]
[ 0.606857] bus: 01 index 2 mmio: [0xfdd00000-0xfddfffff]
[ 0.606859] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.606860] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.606863] bus: 02 index 0 io port: [0xb000-0xbfff]
[ 0.606864] bus: 02 index 1 mmio: [0xfb000000-0xfcffffff]
[ 0.606866] bus: 02 index 2 mmio: [0xd8000000-0xe7ffffff]
[ 0.606867] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.606868] bus: 03 index 0 io port: [0xa000-0xafff]
[ 0.606870] bus: 03 index 1 mmio: [0xfdc00000-0xfdcfffff]
[ 0.606871] bus: 03 index 2 mmio: [0xfdb00000-0xfdbfffff]
[ 0.606872] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.606874] bus: 04 index 0 io port: [0x9000-0x9fff]
[ 0.606875] bus: 04 index 1 mmio: [0xfda00000-0xfdafffff]
[ 0.606876] bus: 04 index 2 mmio: [0xfd900000-0xfd9fffff]
[ 0.606877] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.606886] NET: Registered protocol family 2
[ 0.640050] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.640377] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.641503] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.641790] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.641792] TCP reno registered
[ 0.652085] NET: Registered protocol family 1
[ 0.652176] checking if image is initramfs... it is
[ 1.063343] Freeing initrd memory: 7765k freed
[ 1.066056] audit: initializing netlink socket (disabled)
[ 1.066071] type=2000 audit(1250530455.064:1): initialized
[ 1.071597] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.072419] VFS: Disk quotas dquot_6.5.1
[ 1.072455] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.072841] fuse init (API version 7.10)
[ 1.072889] msgmni has been set to 7532
[ 1.073021] alg: No test for stdrng (krng)
[ 1.073034] io scheduler noop registered
[ 1.073035] io scheduler anticipatory registered
[ 1.073037] io scheduler deadline registered
[ 1.073060] io scheduler cfq registered (default)
[ 1.104601] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.104629] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.104656] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.104685] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 1.104712] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.104766] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 1.104831] pci 0000:00:12.0: Enabling HT MSI Mapping
[ 1.104874] pci 0000:02:00.0: Boot video device
[ 1.120173] pcieport-driver 0000:00:10.0: setting latency timer to 64
[ 1.120340] pcieport-driver 0000:00:10.0: found MSI capability
[ 1.120421] pcieport-driver 0000:00:10.0: irq 2303 for MSI/MSI-X
[ 1.120453] pci_express 0000:00:10.0:pcie00: allocate port service
[ 1.120632] pcieport-driver 0000:00:12.0: setting latency timer to 64
[ 1.120798] pcieport-driver 0000:00:12.0: found MSI capability
[ 1.120878] pcieport-driver 0000:00:12.0: irq 2302 for MSI/MSI-X
[ 1.120910] pci_express 0000:00:12.0:pcie00: allocate port service
[ 1.121052] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.121057] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.121178] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.121180] ACPI: Power Button (FF) [PWRF]
[ 1.121208] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.121210] ACPI: Power Button (CM) [PWRB]
[ 1.121261] fan PNP0C0B:00: registered as cooling_device0
[ 1.121265] ACPI: Fan [FAN] (on)
[ 1.121668] processor ACPI_CPU:00: registered as cooling_device1
[ 1.121688] processor ACPI_CPU:01: registered as cooling_device2
[ 1.130447] ACPI Warning (nspredef-0858): \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference [20080926]
[ 1.130452] ACPI: Expecting a [Reference] package element, found type 0
[ 1.130668] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.131058] ACPI: Thermal Zone [THRM] (40 C)
[ 1.156728] Linux agpgart interface v0.103
[ 1.156735] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.157280] brd: module loaded
[ 1.157452] loop: module loaded
[ 1.157497] Fixed MDIO Bus: probed
[ 1.157501] PPP generic driver version 2.4.2
[ 1.157538] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.157561] Driver 'sd' needs updating - please use bus_type methods
[ 1.157568] Driver 'sr' needs updating - please use bus_type methods
[ 1.157597] ahci 0000:00:09.0: version 3.0
[ 1.158034] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 1.158044] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 1.158083] ahci 0000:00:09.0: irq 2301 for MSI/MSI-X
[ 1.158140] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 1.158143] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
[ 1.158146] ahci 0000:00:09.0: setting latency timer to 64
[ 1.158475] scsi0 : ahci
[ 1.158564] scsi1 : ahci
[ 1.158607] scsi2 : ahci
[ 1.158648] scsi3 : ahci
[ 1.158695] scsi4 : ahci
[ 1.158735] scsi5 : ahci
[ 1.158816] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 2301
[ 1.158819] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 2301
[ 1.158821] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 2301
[ 1.158823] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 2301
[ 1.158825] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 2301
[ 1.158826] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 2301
[ 1.640031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.640694] ata1.00: ATA-8: WDC WD2500AAJS-00L7A0, 01.03E01, max UDMA/133
[ 1.640696] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.642124] ata1.00: configured for UDMA/133
[ 1.960016] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.280009] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.600009] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.920009] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.240009] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.240089] scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAJS-0 01.0 PQ: 0 ANSI: 5
[ 3.240149] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 3.240159] sd 0:0:0:0: [sda] Write Protect is off
[ 3.240161] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.240177] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.240222] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 3.240233] sd 0:0:0:0: [sda] Write Protect is off
[ 3.240234] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.240247] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.240250] sda: sda1 sda2 < sda5 >
[ 3.278075] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.278106] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.278250] pata_amd 0000:00:06.0: version 0.3.10
[ 3.278280] pata_amd 0000:00:06.0: setting latency timer to 64
[ 3.278363] scsi6 : pata_amd
[ 3.278409] scsi7 : pata_amd
[ 3.279040] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 3.279042] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 3.432469] ata7.00: ATAPI: CDU5211, YYS7, max UDMA/33
[ 3.432482] ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 3.440365] ata7.00: configured for UDMA/33
[ 3.440591] ata8: port disabled. ignoring.
[ 3.440847] scsi 6:0:0:0: CD-ROM SONY CD-ROM CDU5211 YYS7 PQ: 0 ANSI: 5
[ 3.443089] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 3.443091] Uniform CD-ROM driver Revision: 3.20
[ 3.443153] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 3.443178] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 3.443434] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.443862] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[ 3.443871] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 3.443886] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 3.443888] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 3.443925] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 3.443947] ehci_hcd 0000:00:02.1: debug port 1
[ 3.443951] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 3.443967] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 3.452020] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 3.452068] usb usb1: configuration #1 chosen from 1 choice
[ 3.452085] hub 1-0:1.0: USB hub found
[ 3.452091] hub 1-0:1.0: 6 ports detected
[ 3.452391] ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
[ 3.452546] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 21
[ 3.452553] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 21 (level, low) -> IRQ 21
[ 3.452559] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 3.452561] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 3.452586] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 3.452605] ehci_hcd 0000:00:04.1: debug port 1
[ 3.452608] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 3.452621] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfe02c000
[ 3.464015] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 3.464051] usb usb2: configuration #1 chosen from 1 choice
[ 3.464066] hub 2-0:1.0: USB hub found
[ 3.464070] hub 2-0:1.0: 6 ports detected
[ 3.464128] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.464530] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 20
[ 3.464537] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 20 (level, low) -> IRQ 20
[ 3.464544] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 3.464546] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.464571] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 3.464589] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
[ 3.522037] usb usb3: configuration #1 chosen from 1 choice
[ 3.522052] hub 3-0:1.0: USB hub found
[ 3.522057] hub 3-0:1.0: 6 ports detected
[ 3.522491] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 23
[ 3.522493] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 23 (level, low) -> IRQ 23
[ 3.522500] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 3.522502] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 3.522524] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 3.522543] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfe02d000
[ 3.578032] usb usb4: configuration #1 chosen from 1 choice
[ 3.578046] hub 4-0:1.0: USB hub found
[ 3.578051] hub 4-0:1.0: 6 ports detected
[ 3.578106] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.578147] usbcore: registered new interface driver libusual
[ 3.578169] usbcore: registered new interface driver usbserial
[ 3.578175] USB Serial support registered for generic
[ 3.578183] usbcore: registered new interface driver usbserial_generic
[ 3.578184] usbserial: USB Serial Driver core
[ 3.578212] PNP: No PS/2 controller found. Probing ports directly.
[ 3.611438] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.620542] mice: PS/2 mouse device common for all mice
[ 3.656554] rtc_cmos 00:05: RTC can wake from S4
[ 3.656575] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.656628] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.656665] device-mapper: uevent: version 1.0.3
[ 3.656722] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.656799] device-mapper: multipath: version 1.0.5 loaded
[ 3.656801] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.656887] cpuidle: using governor ladder
[ 3.656888] cpuidle: using governor menu
[ 3.657173] TCP cubic registered
[ 3.657215] NET: Registered protocol family 10
[ 3.657474] lo: Disabled Privacy Extensions
[ 3.657659] NET: Registered protocol family 17
[ 3.657673] Bluetooth: L2CAP ver 2.11
[ 3.657674] Bluetooth: L2CAP socket layer initialized
[ 3.657676] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.657677] Bluetooth: SCO socket layer initialized
[ 3.657711] Bluetooth: RFCOMM socket layer initialized
[ 3.657715] Bluetooth: RFCOMM TTY layer initialized
[ 3.657716] Bluetooth: RFCOMM ver 1.10
[ 3.657746] powernow-k8: Found 1 AMD Athlon(tm) 7750 Dual-Core Processor processors (2 cpu cores) (version 2.20.00)
[ 3.657786] powernow-k8: 0 : pstate 0 (2700 MHz)
[ 3.657788] powernow-k8: 1 : pstate 1 (1350 MHz)
[ 3.657927] registered taskstats version 1
[ 3.658034] Magic number: 5:123:593
[ 3.658067] pci_link PNP0C0F:32: hash matches
[ 3.658148] rtc_cmos 00:05: setting system clock to 2009-08-17 17:34:18 UTC (1250530458)
[ 3.658151] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.658152] EDD information not available.
[ 3.658179] Freeing unused kernel memory: 536k freed
[ 3.658347] Write protecting the kernel read-only data: 6708k
[ 3.842671] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 3.842682] b43-pci-bridge 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 3.846028] ssb: Sonics Silicon Backplane found on PCI device 0000:01:0a.0
[ 3.848126] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 3.848134] ohci1394 0000:01:08.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 3.848138] ohci1394 0000:01:08.0: setting latency timer to 64
[ 3.897873] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.908397] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 3.908833] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 3.908837] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[ 3.908841] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 4.136510] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 4.340248] usb 3-1: configuration #1 chosen from 1 choice
[ 4.343213] hub 3-1:1.0: USB hub found
[ 4.346189] hub 3-1:1.0: 4 ports detected
[ 4.428623] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 19, addr 00:30:1b:81:7d:6d
[ 4.428627] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 4.459753] PM: Starting manual resume from disk
[ 4.459756] PM: Resume from partition 8:5
[ 4.459757] PM: Checking hibernation image.
[ 4.459870] PM: Resume from disk failed.
[ 4.510450] kjournald starting. Commit interval 5 seconds
[ 4.510465] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.668017] usb 3-4: new low speed USB device using ohci_hcd and address 3
[ 4.882349] usb 3-4: configuration #1 chosen from 1 choice
[ 4.961310] usb 3-1.1: new low speed USB device using ohci_hcd and address 4
[ 5.078383] usb 3-1.1: configuration #1 chosen from 1 choice
[ 5.176627] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000000301b47231f]
[ 5.182729] ieee1394: Node added: ID:BUS[0-01:1023] GUID[002180fffe42e674]
[ 9.118466] udev: starting version 141
[ 9.250195] input: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-4/input/input3
[ 9.261939] usbcore: registered new interface driver hiddev
[ 9.266139] usb 3-4: Weird data, len=1 ff 00 00 00 00 00 ...
[ 9.270488] input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input4
[ 9.288095] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.292634] usbcore: registered new interface driver ati_remote
[ 9.292649] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
[ 9.316679] generic-usb 0003:045E:001D.0001: input,hidraw0: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-1.1/input0
[ 9.329299] input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input6
[ 9.333685] ieee1394: raw1394: /dev/raw1394 device initialized
[ 9.335439] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.360579] cfg80211: Calling CRDA to update world regulatory domain
[ 9.368636] generic-usb 0003:045E:001D.0002: input,hidraw1: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:02.0-1.1/input1
[ 9.368654] usbcore: registered new interface driver usbhid
[ 9.368667] usbhid: v2.6:USB HID core driver
[ 9.368712] NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead.
[ 9.486188] lirc_dev: IR Remote Control driver registered, major 61
[ 9.509148]
[ 9.509148] lirc_atiusb: USB remote driver for LIRC $Revision: 1.69 $
[ 9.509150] lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
[ 9.510768] usbcore: registered new interface driver lirc_atiusb
[ 9.625977] b43-phy0: Broadcom 4306 WLAN found
[ 9.673086] phy0: Selected rate control algorithm 'pid'
[ 9.742934] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[ 9.742939] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
[ 9.743010] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 9.776944] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 9.844209] cfg80211: World regulatory domain updated:
[ 9.844212] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.844214] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.844216] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.844217] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.844219] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.844220] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.132512] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 10.939755] lp: driver loaded but no devices found
[ 10.992024] Adding 9936160k swap on /dev/sda5. Priority:-1 extents:1 across:9936160k
[ 11.517605] EXT3 FS on sda1, internal journal
[ 12.334359] type=1505 audit(1250530467.174:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2362
[ 12.364219] type=1505 audit(1250530467.202:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2366
[ 12.364307] type=1505 audit(1250530467.202:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2366
[ 12.364334] type=1505 audit(1250530467.202:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2366
[ 12.364358] type=1505 audit(1250530467.202:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2366
[ 12.449314] type=1505 audit(1250530467.290:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2371
[ 12.449425] type=1505 audit(1250530467.290:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2371
[ 12.468369] type=1505 audit(1250530467.306:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2375
[ 13.157880] input: b43-phy0 as /devices/virtual/input/input7
[ 13.220541] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 13.290569] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 13.290574] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 13.333469] input: b43-phy0 as /devices/virtual/input/input8
[ 13.372555] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 13.380048] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 13.380052] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 14.403052] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.403054] Bluetooth: BNEP filters: protocol multicast
[ 14.438191] Bridge firewalling registered
[ 15.620516] ppdev: user-space parallel port driver
[ 20.161744] forcedeth 0000:00:0a.0: irq 2300 for MSI/MSI-X
[ 20.161942] eth0: no link during initialization.
[ 20.162771] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 77.192903] input: b43-phy0 as /devices/virtual/input/input9
[ 77.232050] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 77.234720] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 77.234725] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 291.568102] input: b43-phy0 as /devices/virtual/input/input10
[ 291.608043] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 291.610636] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 291.610642] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 291.664381] input: b43-phy0 as /devices/virtual/input/input11
[ 291.704054] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 291.706651] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 291.706656] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 957.649451] eth0: link up.
[ 957.650750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 962.079133] eth0: link down.
[ 964.225476] eth0: link up.
[ 968.572014] eth0: no IPv6 routers present
[ 1042.155083] input: b43-phy0 as /devices/virtual/input/input12
[ 1042.188548] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 1042.191178] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 1042.191183] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 1042.247450] input: b43-phy0 as /devices/virtual/input/input13
[ 1042.292549] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 1042.295183] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 1042.295189] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 1051.500023] pan0: no IPv6 routers present
[ 1108.194667] input: b43-phy0 as /devices/virtual/input/input14
[ 1108.232548] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 1108.235198] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 1108.235204] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 1521.188798] input: b43-phy0 as /devices/virtual/input/input15
[ 1521.232045] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 1521.235739] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 1521.235745] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 1791.185887] input: b43-phy0 as /devices/virtual/input/input16
[ 1791.228548] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 1791.231272] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 1791.231278] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).