gnu

smartctl version 5.38 [i486-pc-linux-gnu] Copyright (C) 2002-8 Bruce AllenHome page is http://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===Device Model:     SAMSUNG HM160HISerial Number:    S14QJD0Q454828Firmware Version: HH100-11User Capacity:    160,041,885,696 bytesDevice is:        In smartctl database [for details use: -P show]ATA Version is:   7ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0Local Time is:    Thu Aug 13 17:47:32 2009 UTC==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.SMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: FAILED!Drive failure expected in less than 24 hours. SAVE ALL DATA.See vendor-specific Attribute list for failed Attributes.General SMART Values:Offline data collection status:  (0x00)	Offline data collection activity					was never started.					Auto Offline Data Collection: Disabled.Self-test execution status:      (  32)	The self-test routine was interrupted					by the host with a hard or soft reset.Total time to complete Offline data collection: 		 (  62) seconds.Offline data collectioncapabilities: 			 (0x5b) SMART execute Offline immediate.					Auto Offline data collection on/off support.					Suspend Offline collection upon new					command.					Offline surface scan supported.					Self-test supported.					No Conveyance Self-test supported.					Selective Self-test supported.SMART capabilities:            (0x0003)	Saves SMART data before entering					power-saving mode.					Supports SMART auto save timer.Error logging capability:        (0x01)	Error logging supported.					General Purpose Logging supported.Short self-test routine recommended polling time: 	 (   2) minutes.Extended self-test routinerecommended polling time: 	 (  62) minutes.SCT capabilities: 	       (0x003f)	SCT Status supported.					SCT Feature Control supported.					SCT Data Table supported.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       -       3127  3 Spin_Up_Time            0x0007   252   252   025    Pre-fail  Always       -       2062  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       24635  5 Reallocated_Sector_Ct   0x0033   001   001   010    Pre-fail  Always   FAILING_NOW 949  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       2037 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1899191 G-Sense_Error_Rate      0x0032   077   077   000    Old_age   Always       -       233545192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       197194 Temperature_Celsius     0x0022   121   079   000    Old_age   Always       -       39 (Lifetime Min/Max 7/53)196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       116992197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       1808198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       5554199 UDMA_CRC_Error_Count    0x0036   252   252   000    Old_age   Always       -       0200 Multi_Zone_Error_Rate   0x000a   252   252   000    Old_age   Always       -       0SMART Error Log Version: 1No Errors LoggedSMART Self-test log structure revision number 1Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error# 1  Short offline       Aborted by host               150%       214         -# 2  Short offline       Completed without error       00%         6         -# 3  Short offline       Completed without error       00%         5         -# 4  Short offline       Aborted by host               150%         4         -SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1SMART Selective self-test log data structure revision number 0Warning: ATA Specification requires selective self-test log data structure revision number = 1 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS    1        0        0  Interrupted [00% left] (0-65535)    2        0        0  Not_testing    3        0        0  Not_testing    4        0        0  Not_testing    5        0        0  Not_testingSelective self-test flags (0x0):  After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.