rendered paste body[ 0.000000] Linux version 2.6.30-gentoo-r4 (root@livecd) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP PREEMPT Fri Jul 31 09:36:57 EDT 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b7ec0000 (usable)
[ 0.000000] BIOS-e820: 00000000b7ec0000 - 00000000b7ed8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b7ed8000 - 00000000b7eda000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b7eda000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb7ec0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 00B0000000 mask FFF8000000 write-back
[ 0.000000] 4 base 00B8000000 mask FFFC000000 write-back
[ 0.000000] 5 base 00BC000000 mask FFFE000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000138000000 aka 4992M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] ACPI: RSDP 000f8120 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT b7ecc915 00054 (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP b7ed799c 000F4 (v03 AMD ANT 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT b7ecc969 0B033 (v01 ATI SB700 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS b7ed9fc0 00040
[ 0.000000] ACPI: SLIC b7ed7b04 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[ 0.000000] ACPI: SSDT b7ed7c7a 002B4 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC b7ed7f2e 0005E (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG b7ed7f8c 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET b7ed7fc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2054MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000200000 - 000097ffc0] TEXT DATA BSS ==> [0000200000 - 000097ffc0]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0000980000 - 00009831a0] BRK ==> [0000980000 - 00009831a0]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f8270] f8270
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000b7ec0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000b7ec0
[ 0.000000] On node 0 totalpages: 753229
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4110 pages used for memmap
[ 0.000000] HighMem zone: 521908 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at ca000000 (gap: c8000000:18000000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c2711000, static data 33252 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 747343
[ 0.000000] Kernel command line: root=/dev/sda7
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] NR_IRQS:320
[ 0.000000] CPU 0 irqstacks, hard=c2711000 soft=c2712000
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2099.715 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Initializing HighMem for node 0 (000377fe:000b7ec0)
[ 0.000999] Memory: 2979600k/3013376k available (4857k kernel code, 32488k reserved, 1876k data, 404k init, 2104072k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfff81000 - 0xfffff000 ( 504 kB)
[ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000999] .init : 0xc089a000 - 0xc08ff000 ( 404 kB)
[ 0.000999] .data : 0xc06be71e - 0xc0893918 (1876 kB)
[ 0.000999] .text : 0xc0200000 - 0xc06be71e (4857 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] hpet clockevent registered
[ 0.000999] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.43 BogoMIPS (lpj=2099715)
[ 0.001232] Mount-cache hash table entries: 512
[ 0.001431] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001514] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.001592] CPU: Physical Processor ID: 0
[ 0.001669] CPU: Processor Core ID: 0
[ 0.001749] Intel machine check architecture supported.
[ 0.001829] Intel machine check reporting enabled on CPU#0.
[ 0.002003] using C1E aware idle routine
[ 0.002088] Checking 'hlt' instruction... OK.
[ 0.006684] Freeing SMP alternatives: 17k freed
[ 0.006810] ACPI: Core revision 20090320
[ 0.021306] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.031410] CPU0: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01
[ 0.031995] CPU 1 irqstacks, hard=c2721000 soft=c2722000
[ 0.031995] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 4189.95 BogoMIPS (lpj=2094979)
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] Intel machine check architecture supported.
[ 0.000999] Intel machine check reporting enabled on CPU#1.
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.102561] CPU1: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01
[ 0.103112] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.103984] Measured 97111997 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.103984] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.104999] Brought up 2 CPUs
[ 0.105076] Total of 2 processors activated (8389.38 BogoMIPS).
[ 0.105211] net_namespace: 1028 bytes
[ 0.105211] NET: Registered protocol family 16
[ 0.106030] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.106155] ACPI: bus type pci registered
[ 0.106244] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 14
[ 0.106244] PCI: MCFG area at e0000000 reserved in E820
[ 0.106985] PCI: Using MMCONFIG for extended config space
[ 0.107066] PCI: Using configuration type 1 for base access
[ 0.112021] bio: create slab <bio-0> at 0
[ 0.113407] ACPI: EC: Look up EC in DSDT
[ 0.117814] ACPI: BIOS _OSI(Linux) query ignored
[ 0.118624] ACPI: OEML b7ed881e 003B4 (v01 AMD LGHP 00000001 MSFT 03000001)
[ 0.118998] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.148049] ACPI: Interpreter enabled
[ 0.148161] ACPI: (supports S0 S5)
[ 0.148335] ACPI: Using IOAPIC for interrupt routing
[ 0.176166] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.176974] ACPI: EC: driver started in interrupt mode
[ 0.177154] ACPI: No dock devices found.
[ 0.177439] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.178190] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.178307] pci 0000:00:04.0: PME# disabled
[ 0.178456] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.178572] pci 0000:00:06.0: PME# disabled
[ 0.178719] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.178835] pci 0000:00:07.0: PME# disabled
[ 0.179005] pci 0000:00:11.0: reg 10 io port: [0x8420-0x8427]
[ 0.179015] pci 0000:00:11.0: reg 14 io port: [0x8414-0x8417]
[ 0.179025] pci 0000:00:11.0: reg 18 io port: [0x8418-0x841f]
[ 0.179035] pci 0000:00:11.0: reg 1c io port: [0x8410-0x8413]
[ 0.179045] pci 0000:00:11.0: reg 20 io port: [0x8400-0x840f]
[ 0.179054] pci 0000:00:11.0: reg 24 32bit mmio: [0xf0207000-0xf02073ff]
[ 0.179133] pci 0000:00:12.0: reg 10 32bit mmio: [0xf0004000-0xf0004fff]
[ 0.179214] pci 0000:00:12.1: reg 10 32bit mmio: [0xf0005000-0xf0005fff]
[ 0.179322] pci 0000:00:12.2: reg 10 32bit mmio: [0xf0207400-0xf02074ff]
[ 0.179401] pci 0000:00:12.2: supports D1 D2
[ 0.179403] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.179487] pci 0000:00:12.2: PME# disabled
[ 0.179610] pci 0000:00:13.0: reg 10 32bit mmio: [0xf0006000-0xf0006fff]
[ 0.179720] pci 0000:00:13.2: reg 10 32bit mmio: [0xf0207800-0xf02078ff]
[ 0.179799] pci 0000:00:13.2: supports D1 D2
[ 0.179801] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.179885] pci 0000:00:13.2: PME# disabled
[ 0.180157] pci 0000:00:14.2: reg 10 64bit mmio: [0xf0000000-0xf0003fff]
[ 0.180222] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.180977] pci 0000:00:14.2: PME# disabled
[ 0.181574] pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.181581] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[ 0.181589] pci 0000:01:05.0: reg 18 32bit mmio: [0xcfdf0000-0xcfdfffff]
[ 0.181606] pci 0000:01:05.0: reg 24 32bit mmio: [0xcfe00000-0xcfefffff]
[ 0.181636] pci 0000:01:05.0: supports D1 D2
[ 0.181684] pci 0000:01:05.1: reg 10 32bit mmio: [0xcfdec000-0xcfdeffff]
[ 0.181735] pci 0000:01:05.1: supports D1 D2
[ 0.182029] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.182034] pci 0000:00:01.0: bridge 32bit mmio: [0xcfd00000-0xcfefffff]
[ 0.182042] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.182124] pci 0000:03:00.0: reg 10 64bit mmio: [0xf0300000-0xf030ffff]
[ 0.182220] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.182389] pci 0000:03:00.0: PME# disabled
[ 0.182605] pci 0000:00:04.0: bridge 32bit mmio: [0xf0300000-0xf03fffff]
[ 0.182672] pci 0000:09:00.0: reg 10 64bit mmio: [0xf0400000-0xf040ffff]
[ 0.182753] pci 0000:09:00.0: supports D1
[ 0.182755] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[ 0.182924] pci 0000:09:00.0: PME# disabled
[ 0.183065] pci 0000:00:06.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[ 0.183147] pci 0000:00:07.0: bridge io port: [0x00-0xfff]
[ 0.183151] pci 0000:00:07.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.183159] pci 0000:00:07.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 0.183247] pci 0000:00:14.4: transparent bridge
[ 0.183384] pci 0000:00:14.4: bridge io port: [0x00-0xfff]
[ 0.183390] pci 0000:00:14.4: bridge 32bit mmio: [0x000000-0x0fffff]
[ 0.183396] pci 0000:00:14.4: bridge 32bit mmio pref: [0x000000-0x0fffff]
[ 0.183428] pci_bus 0000:00: on NUMA node 0
[ 0.183433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.183635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.183708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.183780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 0.183866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.183995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.187994] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.188507] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.189034] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.189587] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.190141] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.190694] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.191258] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.191812] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.192231] SCSI subsystem initialized
[ 0.192231] libata version 3.00 loaded.
[ 0.192231] usbcore: registered new interface driver usbfs
[ 0.192989] usbcore: registered new interface driver hub
[ 0.193057] usbcore: registered new device driver usb
[ 0.193060] PCI: Using ACPI for IRQ routing
[ 0.193060] pci 0000:00:07.0: BAR 7: can't allocate resource
[ 0.193137] pci 0000:00:07.0: BAR 8: can't allocate resource
[ 0.193217] pci 0000:00:07.0: BAR 9: can't allocate resource
[ 0.193298] pci 0000:00:14.4: BAR 7: can't allocate resource
[ 0.193379] pci 0000:00:14.4: BAR 8: can't allocate resource
[ 0.193972] pci 0000:00:14.4: BAR 9: can't allocate resource
[ 0.245992] cfg80211: Calling CRDA to update world regulatory domain
[ 0.246078] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.246299] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.249013] hpet: hpet2 irq 24 for MSI
[ 0.250985] Switched to high resolution mode on CPU 0
[ 0.251922] Switched to high resolution mode on CPU 1
[ 0.261312] pnp: PnP ACPI init
[ 0.261396] ACPI: bus type pnp registered
[ 0.269669] pnp: PnP ACPI: found 11 devices
[ 0.269783] ACPI: ACPI bus type pnp unregistered
[ 0.269870] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.269954] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.270050] system 00:06: ioport range 0x220-0x22f has been reserved
[ 0.270132] system 00:06: ioport range 0x40b-0x40b has been reserved
[ 0.270214] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.270309] system 00:06: ioport range 0x4d6-0x4d6 has been reserved
[ 0.270391] system 00:06: ioport range 0x530-0x537 has been reserved
[ 0.270473] system 00:06: ioport range 0xc00-0xc01 has been reserved
[ 0.270556] system 00:06: ioport range 0xc14-0xc14 has been reserved
[ 0.270638] system 00:06: ioport range 0xc50-0xc52 has been reserved
[ 0.270720] system 00:06: ioport range 0xc6c-0xc6c has been reserved
[ 0.270802] system 00:06: ioport range 0xc6f-0xc6f has been reserved
[ 0.270884] system 00:06: ioport range 0xcd0-0xcd1 has been reserved
[ 0.270966] system 00:06: ioport range 0xcd2-0xcd3 has been reserved
[ 0.271059] system 00:06: ioport range 0xcd4-0xcd5 has been reserved
[ 0.271140] system 00:06: ioport range 0xcd6-0xcd7 has been reserved
[ 0.271223] system 00:06: ioport range 0xcd8-0xcdf has been reserved
[ 0.271323] system 00:06: ioport range 0x8000-0x805f has been reserved
[ 0.271406] system 00:06: ioport range 0xf40-0xf47 has been reserved
[ 0.271488] system 00:06: ioport range 0x87f-0x87f has been reserved
[ 0.271572] system 00:06: iomem range 0xff800000-0xffefffff has been reserved
[ 0.271655] system 00:06: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.271742] system 00:07: iomem range 0xe0000-0xfffff could not be reserved
[ 0.271825] system 00:07: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.271909] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.307081] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.307164] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.307247] pci 0000:00:01.0: MEM window: 0xcfd00000-0xcfefffff
[ 0.307343] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.307492] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[ 0.307572] pci 0000:00:04.0: IO window: disabled
[ 0.307655] pci 0000:00:04.0: MEM window: 0xf0300000-0xf03fffff
[ 0.307738] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.307822] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
[ 0.307902] pci 0000:00:06.0: IO window: disabled
[ 0.307985] pci 0000:00:06.0: MEM window: 0xf0400000-0xf04fffff
[ 0.308071] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.308156] pci 0000:00:07.0: PCI bridge, secondary bus 0000:0c
[ 0.308237] pci 0000:00:07.0: IO window: disabled
[ 0.308330] pci 0000:00:07.0: MEM window: disabled
[ 0.308411] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.308495] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0f
[ 0.308576] pci 0000:00:14.4: IO window: disabled
[ 0.308660] pci 0000:00:14.4: MEM window: disabled
[ 0.308743] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.308846] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.308931] pci 0000:00:04.0: setting latency timer to 64
[ 0.308940] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.309033] pci 0000:00:06.0: setting latency timer to 64
[ 0.309042] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.309128] pci 0000:00:07.0: setting latency timer to 64
[ 0.309140] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.309143] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.309147] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.309150] pci_bus 0000:01: resource 1 mem: [0xcfd00000-0xcfefffff]
[ 0.309153] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.309156] pci_bus 0000:03: resource 1 mem: [0xf0300000-0xf03fffff]
[ 0.309160] pci_bus 0000:09: resource 1 mem: [0xf0400000-0xf04fffff]
[ 0.309163] pci_bus 0000:0c: resource 0 mem: [0x0-0xfff]
[ 0.309166] pci_bus 0000:0c: resource 1 mem: [0x0-0xfffff]
[ 0.309169] pci_bus 0000:0c: resource 2 mem: [0x0-0xfffff]
[ 0.309172] pci_bus 0000:0f: resource 0 mem: [0x0-0xfff]
[ 0.309175] pci_bus 0000:0f: resource 1 mem: [0x0-0xfffff]
[ 0.309177] pci_bus 0000:0f: resource 2 mem: [0x0-0xfffff]
[ 0.309180] pci_bus 0000:0f: resource 3 io: [0x00-0xffff]
[ 0.309183] pci_bus 0000:0f: resource 4 mem: [0x000000-0xffffffff]
[ 0.309217] NET: Registered protocol family 2
[ 0.345358] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.345824] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.346784] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.347303] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.347385] TCP reno registered
[ 0.359386] NET: Registered protocol family 1
[ 0.360241] Machine check exception polling timer started.
[ 0.360817] microcode: no support for this CPU vendor
[ 0.364790] highmem bounce pool size: 64 pages
[ 0.364927] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.369406] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.369962] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.370893] SGI XFS Quota Management subsystem
[ 0.371014] msgmni has been set to 1711
[ 0.372748] alg: No test for fcrypt (fcrypt-generic)
[ 0.376709] alg: No test for stdrng (krng)
[ 0.376837] alg: No test for stdrng (ansi_cprng)
[ 0.376927] io scheduler noop registered
[ 0.377122] io scheduler cfq registered (default)
[ 0.377311] pci 0000:01:05.0: Boot video device
[ 0.377561] pcieport-driver 0000:00:04.0: irq 25 for MSI/MSI-X
[ 0.377579] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 0.377834] pcieport-driver 0000:00:06.0: irq 26 for MSI/MSI-X
[ 0.377850] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 0.378103] pcieport-driver 0000:00:07.0: irq 27 for MSI/MSI-X
[ 0.378120] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 0.428907] Non-volatile memory driver v1.3
[ 0.429012] Linux agpgart interface v0.103
[ 0.429195] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 0.429385] Hangcheck: Using get_cycles().
[ 0.429883] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.430039] ACPI: Power Button [PWRF]
[ 0.430197] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.430354] ACPI: Power Button [PWRB]
[ 0.430545] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.433060] ACPI: Lid Switch [LID0]
[ 0.433330] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 0.433502] ACPI: Sleep Button [SLPB]
[ 0.462830] acpi device:26: registered as cooling_device0
[ 0.463278] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:22/device:23/input/input4
[ 0.463428] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 0.463691] processor ACPI_CPU:00: registered as cooling_device1
[ 0.463849] processor ACPI_CPU:01: registered as cooling_device2
[ 0.482889] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.483008] ACPI: Thermal Zone [TZS0] (57 C)
[ 0.492917] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.493043] ACPI: Thermal Zone [TZS1] (51 C)
[ 0.493240] [drm] Initialized drm 1.1.0 20060810
[ 0.494204] loop: module loaded
[ 0.494524] Driver 'sd' needs updating - please use bus_type methods
[ 0.494647] Driver 'sr' needs updating - please use bus_type methods
[ 0.494824] ahci 0000:00:11.0: version 3.0
[ 0.494848] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.495063] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.495210] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 0.495951] scsi0 : ahci
[ 0.496270] scsi1 : ahci
[ 0.496471] scsi2 : ahci
[ 0.496679] scsi3 : ahci
[ 0.496959] ata1: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207100 irq 22
[ 0.497082] ata2: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207180 irq 22
[ 0.497228] ata3: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207200 irq 22
[ 0.497384] ata4: SATA max UDMA/133 abar m1024@0xf0207000 port 0xf0207280 irq 22
[ 0.497628] tg3.c:v3.98 (February 25, 2009)
[ 0.497724] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.497812] tg3 0000:03:00.0: setting latency timer to 64
[ 0.499580] tg3 0000:03:00.0: PME# disabled
[ 0.641215] eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:1f:16:9e:2b:13
[ 0.641405] eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 0.641550] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 0.641631] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 0.642396] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.642498] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.642592] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.642853] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.643022] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.643188] ehci_hcd 0000:00:12.2: debug port 1
[ 0.643295] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0207400
[ 0.649059] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.649355] usb usb1: configuration #1 chosen from 1 choice
[ 0.649557] hub 1-0:1.0: USB hub found
[ 0.649697] hub 1-0:1.0: 6 ports detected
[ 0.650074] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.650216] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.650491] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.650682] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.650868] ehci_hcd 0000:00:13.2: debug port 1
[ 0.651931] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0207800
[ 0.658056] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.658307] usb usb2: configuration #1 chosen from 1 choice
[ 0.658457] hub 2-0:1.0: USB hub found
[ 0.658541] hub 2-0:1.0: 6 ports detected
[ 0.658949] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.659226] usbcore: registered new interface driver usblp
[ 0.659316] Initializing USB Mass Storage driver...
[ 0.659452] usbcore: registered new interface driver usb-storage
[ 0.659534] USB Mass Storage support registered.
[ 0.659718] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.670786] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.678270] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.678354] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.678440] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.678525] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.678611] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.678887] mice: PS/2 mouse device common for all mice
[ 0.679499] wistron_btns: System unknown
[ 0.679600] rtc_cmos 00:04: RTC can wake from S4
[ 0.679799] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.679909] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.680044] i2c /dev entries driver
[ 0.680221] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0
[ 0.680859] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 0.681010] cpuidle: using governor ladder
[ 0.681093] cpuidle: using governor menu
[ 0.682229] usbcore: registered new interface driver hiddev
[ 0.682417] usbcore: registered new interface driver usbhid
[ 0.682548] usbhid: v2.6:USB HID core driver
[ 0.682800] Netfilter messages via NETLINK v0.30.
[ 0.682950] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.683433] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 0.683595] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 0.683760] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 0.683949] ctnetlink v0.93: registering with nfnetlink.
[ 0.684930] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.685098] TCP cubic registered
[ 0.685230] Initializing XFRM netlink socket
[ 0.685777] NET: Registered protocol family 10
[ 0.687629] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.687811] IPv6 over IPv4 tunneling driver
[ 0.688929] NET: Registered protocol family 17
[ 0.689320] RPC: Registered udp transport module.
[ 0.689399] RPC: Registered tcp transport module.
[ 0.689542] Using IPI Shortcut mode
[ 0.700837] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.802089] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.802247] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.803071] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.803183] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.803599] ata1.00: ATA-8: ST9320320AS, 0303, max UDMA/133
[ 0.803682] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 0.805366] ata1.00: configured for UDMA/133
[ 0.805572] scsi 0:0:0:0: Direct-Access ATA ST9320320AS 0303 PQ: 0 ANSI: 5
[ 0.806172] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.806224] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 0.806239] sd 0:0:0:0: [sda] Write Protect is off
[ 0.806242] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.806270] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.806357] sda:<6>ata2.00: ATAPI: HL-DT-ST DVDRAM GT20N, CP02, max UDMA/133
[ 0.811316] ata2.00: configured for UDMA/133
[ 0.816800] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20N CP02 PQ: 0 ANSI: 5
[ 0.828318] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.828464] Uniform CD-ROM driver Revision: 3.20
[ 0.828693] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.828926] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.063682] sda1 sda2 sda3 < sda5<6>usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1.116000] sda6 sda7 sda8 >
[ 1.139394] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.210934] EXT3-fs: mounted filesystem with writeback data mode.
[ 1.211023] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[ 1.211150] Freeing unused kernel memory: 404k freed
[ 1.211518] kjournald starting. Commit interval 5 seconds
[ 1.281477] usb 2-5: configuration #1 chosen from 1 choice
[ 1.890318] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000
[ 1.953302] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
[ 2.685679] udev: starting version 141
[ 2.876993] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.877038] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.877059] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.877224] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.877317] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf0004000
[ 2.921215] ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.921229] ath9k 0000:09:00.0: setting latency timer to 64
[ 2.932498] usb usb3: configuration #1 chosen from 1 choice
[ 2.932531] hub 3-0:1.0: USB hub found
[ 2.932578] hub 3-0:1.0: 3 ports detected
[ 2.932745] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.932766] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.932846] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.932903] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0005000
[ 2.987495] usb usb4: configuration #1 chosen from 1 choice
[ 2.987528] hub 4-0:1.0: USB hub found
[ 2.987575] hub 4-0:1.0: 3 ports detected
[ 2.987756] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.987785] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.987856] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.987924] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0006000
[ 3.046000] usb usb5: configuration #1 chosen from 1 choice
[ 3.046031] hub 5-0:1.0: USB hub found
[ 3.046046] hub 5-0:1.0: 3 ports detected
[ 3.046867] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 3.046881] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.145118] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/input/input7
[ 3.145307] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/input/input8
[ 3.145368] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/input/input9
[ 3.145593] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.145620] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 3.369307] usb 5-2: new full speed USB device using ohci_hcd and address 2
[ 3.522034] usb 5-2: configuration #1 chosen from 1 choice
[ 3.525983] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 3.527027] Registered led device: ath9k-phy0::radio
[ 3.527044] Registered led device: ath9k-phy0::assoc
[ 3.527064] Registered led device: ath9k-phy0::tx
[ 3.527078] Registered led device: ath9k-phy0::rx
[ 3.527086] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf8120000, irq=18
[ 3.530174] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input10
[ 3.530418] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-2/input0
[ 3.537990] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input11
[ 3.538213] generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-2/input1
[ 4.682204] EXT3 FS on sda7, internal journal
[ 5.135062] Adding 530104k swap on /dev/sda6. Priority:-1 extents:1 across:530104k