rendered paste bodyfrancois@francois:~$ dmesg
[ 0.000000] Bootdata ok (command line is root=/dev/hda3 ro quiet splash)
[ 0.000000] Linux version 2.6.15-26-amd64-generic (buildd@king) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 02:52:35 UTC 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
[ 0.000000] BIOS-e820: 000000003bef0000 - 000000003befa000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003befa000 - 000000003bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bf00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7f60
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000003bef619d
[ 0.000000] ACPI: FADT (v001 SiS 755F 0x06040000 PTL 0x000f4240) @ 0x000000003bef9e3e
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000003bef9eb2
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000003bef9f88
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000003bef9fd8
[ 0.000000] ACPI: DSDT (v001 PTLTD 755 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003bef0000
[ 0.000000] Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003bef0000
[ 0.000000] On node 0 totalpages: 241107
[ 0.000000] DMA zone: 3015 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 238092 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bff00000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ e0000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE f38)
[ 0.000000] Aperture from AGP bridge too small (32 MB)
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 4000000
[ 0.000000] SMP: Allowing 3 CPUs, 2 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hda3 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[ 0.000000] time.c: Using 3.579545 MHz PM timer.
[ 0.000000] time.c: Detected 1800.076 MHz processor.
[ 10.498735] Console: colour VGA+ 80x25
[ 10.499932] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)[ 10.501882] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 10.516749] Memory: 889468k/981952k available (2150k kernel code, 92096k reserved, 757k data, 180k init)
[ 10.595890] Calibrating delay using timer specific routine.. 3614.99 BogoMIPS (lpj=7229991)
[ 10.595957] Security Framework v1.0.0 initialized
[ 10.595965] SELinux: Disabled at boot.
[ 10.595992] Mount-cache hash table entries: 256
[ 10.596152] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)[ 10.596155] CPU: L2 Cache: 512K (64 bytes/line)
[ 10.596158] CPU 0(1) -> Node 0 -> Core 0
[ 10.596169] mtrr: v2.0 (20020519)
[ 10.596179] SMP alternatives: switching to UP code
[ 10.596657] checking if image is initramfs... it is
[ 11.242821] Freeing initrd memory: 7605k freed
[ 11.252262] ACPI: Looking for DSDT ... not found!
[ 11.295863] Using local APIC timer interrupts.
[ 11.351335] Detected 12.500 MHz APIC timer.
[ 11.351416] Brought up 1 CPUs
[ 11.351448] time.c: Using PIT/TSC based timekeeping.
[ 11.351450] testing NMI watchdog ... OK.
[ 11.391886] NET: Registered protocol family 16
[ 11.391918] ACPI: bus type pci registered
[ 11.391925] PCI: Using configuration type 1
[ 11.392448] ACPI: Subsystem revision 20051216
[ 11.394244] ACPI: Interpreter enabled
[ 11.394246] ACPI: Using IOAPIC for interrupt routing
[ 11.394514] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.394518] PCI: Probing PCI hardware (bus 00)
[ 11.396014] Uncovering SIS963 that hid as a SIS503 (compatible=0)
[ 11.396049] PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
[ 11.396421] Boot video device is 0000:01:00.0
[ 11.396488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.403009] ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
[ 11.416464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
[ 11.416636] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
[ 11.416804] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
[ 11.416986] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
[ 11.417171] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[ 11.417339] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[ 11.417507] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 11.417675] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
[ 11.417965] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 11.417980] pnp: PnP ACPI init
[ 11.418660] pnp: PnP ACPI: found 7 devices
[ 11.418683] PCI: Using ACPI for IRQ routing
[ 11.418686] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 11.418793] agpgart: Detected AGP bridge 0
[ 11.419522] agpgart: Aperture conflicts with PCI mapping.
[ 11.419557] agpgart: Aperture from AGP @ e0000000 size 32 MB
[ 11.420984] agpgart: AGP aperture is 32M @ 0xe0000000
[ 11.421002] PCI-DMA: Disabling IOMMU.
[ 11.421183] pnp: 00:03: ioport range 0x8000-0x807f could not be reserved
[ 11.421187] pnp: 00:03: ioport range 0x8080-0x80ff has been reserved
[ 11.421190] pnp: 00:03: ioport range 0x8100-0x811f has been reserved
[ 11.421193] pnp: 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 11.421376] PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
[ 11.421378] PCI: Bridge: 0000:00:01.0
[ 11.421381] IO window: a000-afff
[ 11.421386] MEM window: e2100000-e21fffff
[ 11.421390] PREFETCH window: e8000000-efffffff
[ 11.421394] PCI: Bus 2, cardbus bridge: 0000:00:06.0
[ 11.421397] IO window: 00002400-000024ff
[ 11.421400] IO window: 00002800-000028ff
[ 11.421404] PREFETCH window: 50000000-51ffffff
[ 11.421408] MEM window: 52000000-53ffffff
[ 11.421424] PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
[ 11.421432] GSI 16 sharing vector 0xA9 and IRQ 16
[ 11.421438] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 169
[ 11.421539] Simple Boot Flag at 0x38 set to 0x1
[ 11.421670] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 11.421962] audit: initializing netlink socket (disabled)
[ 11.421975] audit(1156721412.924:1): initialized
[ 11.422109] VFS: Disk quotas dquot_6.5.1
[ 11.422127] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 11.422179] Initializing Cryptographic API
[ 11.422184] io scheduler noop registered
[ 11.422193] io scheduler anticipatory registered
[ 11.422199] io scheduler deadline registered
[ 11.422214] io scheduler cfq registered
[ 11.436495] Real Time Clock Driver v1.12
[ 11.436539] Linux agpgart interface v0.101 (c) Dave Jones
[ 11.436637] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 11.441790] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 11.442031] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.442070] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 11.444096] GSI 17 sharing vector 0xB1 and IRQ 17
[ 11.444103] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177
[ 11.444110] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 11.444470] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 11.444518] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 11.444521] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 11.444718] mice: PS/2 mouse device common for all mice
[ 11.445254] NET: Registered protocol family 2
[ 11.483231] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)[ 11.483618] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 11.486478] input: AT Translated Set 2 keyboard as /class/input/input0
[ 11.487439] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 11.488636] TCP: Hash tables configured (established 131072 bind 65536)
[ 11.488641] TCP reno registered
[ 11.488782] TCP bic registered
[ 11.488791] NET: Registered protocol family 1
[ 11.488801] NET: Registered protocol family 8
[ 11.488803] NET: Registered protocol family 20
[ 11.488972] ACPI wakeup devices:
[ 11.488975] PCI0 LAN MODM USB0 USB1 USB2 USB3
[ 11.488980] ACPI: (supports S0 S3 S4 S5)
[ 11.489036] Freeing unused kernel memory: 180k freed
[ 11.531294] vga16fb: initializing
[ 11.531300] vga16fb: mapped to 0xffff8100000a0000
[ 11.605449] Console: switching to colour frame buffer device 80x25
[ 11.605454] fb0: VGA16 VGA frame buffer device
[ 12.635586] Capability LSM initialized
[ 12.693284] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 12.696404] ACPI: Thermal Zone [THRM] (50 C)
[ 13.166064] SIS5513: IDE controller at PCI slot 0000:00:02.5
[ 13.166080] GSI 18 sharing vector 0xB9 and IRQ 18
[ 13.166086] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 185
[ 13.166097] SIS5513: chipset revision 0
[ 13.166099] SIS5513: not 100% native mode: will probe irqs later
[ 13.166110] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 13.166124] ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio
[ 13.166136] ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio
[ 13.166148] Probing IDE interface ide0...
[ 13.451805] hda: HTS541080G9AT00, ATA DISK drive
[ 14.122979] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 14.139618] Probing IDE interface ide1...
[ 14.873783] hdc: PIONEER DVD-RW DVR-K16RS, ATAPI CD/DVD-ROM drive
[ 15.545521] ide1 at 0x170-0x177,0x376 on irq 15
[ 15.562386] hda: max request size: 1024KiB
[ 15.570097] hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
[ 15.570410] hda: cache flushes supported
[ 15.570600] hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
[ 15.637304] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(33)
[ 15.637313] Uniform CD-ROM driver Revision: 3.20
[ 16.148134] usbcore: registered new driver usbfs
[ 16.148478] usbcore: registered new driver hub
[ 16.150145] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 16.150469] GSI 19 sharing vector 0xC1 and IRQ 19
[ 16.150475] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 193
[ 16.150698] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 16.367949] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 16.367962] ohci_hcd 0000:00:03.0: irq 193, io mem 0xe2002000
[ 16.423655] hub 1-0:1.0: USB hub found
[ 16.423668] hub 1-0:1.0: 3 ports detected
[ 16.527318] GSI 20 sharing vector 0xC9 and IRQ 20
[ 16.527323] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 201
[ 16.527475] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 16.743032] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 16.743043] ohci_hcd 0000:00:03.1: irq 201, io mem 0xe2003000
[ 16.799034] hub 2-0:1.0: USB hub found
[ 16.799044] hub 2-0:1.0: 3 ports detected
[ 16.904452] GSI 21 sharing vector 0xD1 and IRQ 21
[ 16.904460] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 209
[ 16.904723] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 16.904764] PCI: cache line size of 64 is not supported by device 0000:00:03.2
[ 16.905009] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 16.905021] ehci_hcd 0000:00:03.2: irq 209, io mem 0xe2004000
[ 16.905031] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 16.905297] hub 3-0:1.0: USB hub found
[ 16.905305] hub 3-0:1.0: 6 ports detected
[ 17.243842] Attempting manual resume
[ 17.300391] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.302042] kjournald starting. Commit interval 5 seconds
[ 17.493747] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 29.415105] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 29.423101] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.697098] sis900.c: v1.08.09 Sep. 19 2005
[ 29.697146] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 169
[ 29.701759] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
[ 29.707306] 0000:00:04.0: Using transceiver found at address 13 as default
[ 29.760931] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 169, 00:16:36:38:39:28.
[ 29.760955] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 169
[ 29.760968] Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083]
[ 29.760982] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 29.760984] Yenta: Routing CardBus interrupts to PCI
[ 29.760988] Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
[ 29.766386] input: PC Speaker as /class/input/input1
[ 29.773074] ieee80211_crypt: registered algorithm 'NULL'
[ 29.784091] ieee80211: 802.11 data/management/control stack, git-1.1.7
[ 29.784095] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 29.831043] bcm43xx driver
[ 29.992121] Yenta: ISA IRQ mask 0x06f8, PCI irq 169
[ 29.992126] Socket status: 30000007
[ 29.996711] GSI 22 sharing vector 0xD9 and IRQ 22
[ 29.996719] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 217
[ 30.084867] usbcore: registered new driver hiddev
[ 30.095314] input: USB Mouse as /class/input/input2
[ 30.095366] input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:03.0-2
[ 30.095377] usbcore: registered new driver usbhid
[ 30.095380] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 30.202138] ieee80211_crypt: registered algorithm 'WEP'
[ 30.335962] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 30.373250] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 30.426824] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 30.436359] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 30.440245] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177
[ 30.471510] ts: Compaq touchscreen protocol output
[ 31.257477] intel8x0_measure_ac97_clock: measured 55453 usecs
[ 31.257481] intel8x0: clocking to 48000
[ 31.495776] NET: Registered protocol family 17
[ 31.554855] lp: driver loaded but no devices found
[ 31.621652] ndiswrapper version 1.23 loaded (preempt=yes,smp=yes)
[ 31.706785] Adding 1421712k swap on /dev/hda5. Priority:-1 extents:1 across:1421712k
[ 31.793449] EXT3 FS on hda3, internal journal
[ 31.952773] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 31.952777] md: bitmap version 4.39
[ 32.487496] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 32.492534] eth0: Media Link On 100mbps full-duplex
[ 32.998555] cdrom: open failed.
[ 33.459717] NTFS driver 2.1.25 [Flags: R/O MODULE].
[ 33.521221] NTFS volume version 3.1.
[ 33.577692] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 34.466950] NET: Registered protocol family 10
[ 34.467078] lo: Disabled Privacy Extensions
[ 34.467263] IPv6 over IPv4 tunneling driver
[ 39.844187] ACPI: AC Adapter [ACAD] (on-line)
[ 39.895139] ACPI: Battery Slot [BAT1] (battery present)
[ 39.959139] ACPI: Power Button (FF) [PWRF]
[ 39.959161] ACPI: Lid Switch [LID]
[ 39.959165] ACPI: Power Button (CM) [PWRB]
[ 39.959173] ACPI: Sleep Button (CM) [SLPB]
[ 40.046289] ibm_acpi: ec object not found
[ 40.073698] pcc_acpi: loading...
[ 40.488806] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[ 40.488846] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x4 (1450 mV)
[ 40.488849] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6 (1400 mV)
[ 40.488852] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
[ 40.488857] cpu_init done, current fid 0xa, vid 0x4
[ 44.454048] eth0: no IPv6 routers present
[ 44.994274] ppdev: user-space parallel port driver
[ 48.229545] Bluetooth: Core ver 2.8
[ 48.229550] NET: Registered protocol family 31
[ 48.229553] Bluetooth: HCI device and connection manager initialized
[ 48.229565] Bluetooth: HCI socket layer initialized
[ 48.241662] Bluetooth: L2CAP ver 2.8
[ 48.241666] Bluetooth: L2CAP socket layer initialized
[ 48.252250] Bluetooth: RFCOMM socket layer initialized
[ 48.252267] Bluetooth: RFCOMM TTY layer initialized
[ 48.252270] Bluetooth: RFCOMM ver 1.7
[ 61.854907] eth0: Media Link Off
[ 95.324248] eth0: Media Link On 100mbps full-duplex