********************************************************************************
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
********************************************************************************
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 18 21:21:54 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 18 22:22:54 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 00:58:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 00:58:23 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 00:58:57 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:00:03 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:00:22 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 17836: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 17837: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:01:23 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 17961: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 17962: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:01:53 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 18086: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 18087: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:02:21 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 18212: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 18213: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:03:17 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 18337: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 18338: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:03:42 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 18463: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 18464: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:10:24 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 23424: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 23425: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:15:04 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 24388: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 24389: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:17:57 2009
(==) Using config file: "/etc/X11/xorg.conf"
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 24520: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 24521: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:27:33 2009
(==) Using config file: "/etc/X11/xorg.conf"
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 2493: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 2494: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:28:04 2009
(==) Using config file: "/etc/X11/xorg.conf"
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 2617: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 2618: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 01:28:56 2009
(==) Using config file: "/etc/X11/xorg.conf"
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 2742: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 2743: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 16:42:47 2009
(==) Using config file: "/etc/X11/xorg.conf"
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 5567: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 5568: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 16:57:23 2009
(==) Using config file: "/etc/X11/xorg.conf"
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 5709: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 5710: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 22 22:53:17 2009
(==) Using config file: "/etc/X11/xorg.conf"
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 5385: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 5386: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 22 22:56:49 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 22 22:57:49 2009
(==) Using config file: "/etc/X11/xorg.conf"
Parse error on line 71 of section Device in file /etc/X11/xorg.conf
This section must have an Identifier line.
(EE) Problem parsing the config file
(EE) Error parsing the config file
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 22 22:58:32 2009
(==) Using config file: "/etc/X11/xorg.conf"
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 5802: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 5803: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 22 22:58:37 2009
(==) Using config file: "/etc/X11/xorg.conf"
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
process 5925: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
KCrash: Application 'kdmgreet' crashing...
process 5926: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory
See the manual page for dbus-uuidgen to correct this issue.
D-Bus not built with -rdynamic so unable to print a backtrace
disable primary dac
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 i686
Current Operating System: Linux symphonyous 2.6.29-gentoo-r5 #1 PREEMPT Sat Jun 27 00:02:05 CEST 2009 i686
Build Date: 17 July 2009 02:22:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 22 22:59:03 2009
(==) Using config file: "/etc/X11/xorg.conf"
NTSC PAL
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Unhandled monitor type 0
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV