rendered paste body# Makefile.in generated by automake 1.8 from Makefile.am.
# Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
srcdir = .
top_srcdir = .
pkgdatadir = $(datadir)/nagios-plugins
pkglibdir = $(libdir)/nagios-plugins
pkgincludedir = $(includedir)/nagios-plugins
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_triplet = sparc-sun-solaris2.9
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/command.cfg.in \
$(srcdir)/config.h.in $(srcdir)/test.pl.in \
$(top_srcdir)/configure $(top_srcdir)/intl/Makefile.in \
$(top_srcdir)/pkg/solaris/pkginfo.in ABOUT-NLS AUTHORS COPYING \
ChangeLog INSTALL NEWS THANKS config.guess config.rpath \
config.sub configure.in depcomp install-sh missing \
mkinstalldirs
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/afs.m4 \
$(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/exitfail.m4 \
$(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fstypename.m4 \
$(top_srcdir)/m4/fsusage.m4 $(top_srcdir)/m4/getopt.m4 \
$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intdiv0.m4 \
$(top_srcdir)/m4/inttypes-pri.m4 $(top_srcdir)/m4/inttypes.m4 \
$(top_srcdir)/m4/inttypes_h.m4 $(top_srcdir)/m4/lcmessage.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/ls-mntd-fs.m4 \
$(top_srcdir)/m4/malloc.m4 $(top_srcdir)/m4/mountlist.m4 \
$(top_srcdir)/m4/np_coreutils.m4 $(top_srcdir)/m4/np_curl.m4 \
$(top_srcdir)/m4/onceonly.m4 $(top_srcdir)/m4/progtest.m4 \
$(top_srcdir)/m4/realloc.m4 $(top_srcdir)/m4/stdbool.m4 \
$(top_srcdir)/m4/stdint_h.m4 $(top_srcdir)/m4/uintmax_t.m4 \
$(top_srcdir)/m4/ulonglong.m4 $(top_srcdir)/m4/unlocked-io.m4 \
$(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = command.cfg test.pl pkg/solaris/pkginfo \
intl/Makefile
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
INSTALL = ./install-sh -c
ACLOCAL = ${SHELL} /export/home/reppocs/nagios-plugins-1.4/missing --run aclocal-1.8ALLOCA =
AMDEP_FALSE = #
AMDEP_TRUE =
AMTAR = ${SHELL} /export/home/reppocs/nagios-plugins-1.4/missing --run tar
AUTOCONF = ${SHELL} /export/home/reppocs/nagios-plugins-1.4/missing --run autoconf
AUTOHEADER = ${SHELL} /export/home/reppocs/nagios-plugins-1.4/missing --run autoheader
AUTOMAKE = ${SHELL} /export/home/reppocs/nagios-plugins-1.4/missing --run automake-1.8
AWK = nawk
BASENAME = /usr/bin/basename
BUILD_INCLUDED_LIBINTL = no
CATOBJEXT =
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS =
CYGPATH_W = echo
DATADIRNAME = share
DEFS = -DLOCALEDIR=\"$(localedir)\"
DEPDIR = .deps
DEPLIBS =
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = egrep
EXEEXT =
EXTRAS = check_procs check_nagios check_dns check_by_ssh check_swap check_dig check_nt
EXTRA_NETOBJS =
GENCAT = gencat
GETLOADAVG_LIBS = -lkstat
GLIBC21 = no
GMSGFMT = /usr/local/bin/msgfmt
HAVE__BOOL = 1
HOSTNAME = /usr/bin/hostname
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_OPTS = -o nagios -g nagios
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
INSTOBJEXT = .mo
INTLBISON = :
INTLLIBS =
INTLOBJS =
INTL_LIBTOOL_SUFFIX_PREFIX =
KMEM_GROUP =
KRBINCLUDE =
LDAPINCLUDE =
LDAPLIBS =
LDFLAGS = -L.
LIBICONV = -liconv
LIBINTL =
LIBOBJS = error$U.o mountlist$U.o fsusage$U.o
LIBS = -lgen -lsocket
LTLIBICONV = -liconv
LTLIBINTL =
LTLIBOBJS = error$U.lo mountlist$U.lo fsusage$U.lo
MAKEINFO = ${SHELL} /export/home/reppocs/nagios-plugins-1.4/missing --run makeinfo
MKINSTALLDIRS = ./mkinstalldirs
MSGFMT = /usr/local/bin/msgfmt
MSGMERGE = /usr/local/bin/msgmerge
MYSQLINCLUDE =
MYSQLLIBS =
NEED_SETGID = false
NEED_VA_LIST =
OBJEXT = o
OPENSSL =
PACKAGE = nagios-plugins
PACKAGE_BUGREPORT =
PACKAGE_NAME = nagios-plugins
PACKAGE_STRING = nagios-plugins 1.4
PACKAGE_TARNAME = nagios-plugins
PACKAGE_VERSION = 1.4
PATH_SEPARATOR = :
PATH_TO_DIG = /usr/sbin/dig
PATH_TO_FPING =
PATH_TO_HOST =
PATH_TO_LMSTAT =
PATH_TO_LSPS =
PATH_TO_MAILQ = /usr/bin/mailq
PATH_TO_NSLOOKUP = /usr/sbin/nslookup
PATH_TO_NTPDATE = /usr/sbin/ntpdate
PATH_TO_NTPDC = /usr/sbin/xntpdc
PATH_TO_NTPQ = /usr/sbin/ntpq
PATH_TO_PING = /usr/sbin/ping
PATH_TO_PING6 =
PATH_TO_PS = /usr/bin/ps
PATH_TO_QMAIL_QSTAT =
PATH_TO_QSTAT =
PATH_TO_QUAKESTAT =
PATH_TO_RPCINFO = /usr/bin/rpcinfo
PATH_TO_SMBCLIENT =
PATH_TO_SNMPGET =
PATH_TO_SNMPGETNEXT =
PATH_TO_SSH = /usr/local/bin/ssh
PATH_TO_SWAP = /usr/sbin/swap
PATH_TO_SWAPINFO =
PATH_TO_UPTIME = /usr/bin/uptime
PATH_TO_WHO = /usr/bin/who
PERL = /usr/bin/perl
PGINCLUDE =
PGLIBS =
PKG_ARCH = sparc
PLUGIN_TEST = t/check_disk.t t/check_dns.t t/check_fping.t t/check_ftp.t t/check_hpjd.t t/check_http.t t/check_imap.t t/check_load.t t/check_mysql.t t/check_ping.t t/check_pop.t t/check_procs.t t/check_smtp.t t/check_snmp.t t/check_swap.t t/check_tcp.t t/check_time.t t/check_udp.t t/check_users.t t/check_vsz.t
POSUB =
POW_LIB =
PYTHON =
RADIUSLIBS =
RANLIB = ranlib
RELEASE = 1
REV_DATESTAMP = 2005.06.14.08.48
REV_TIMESTAMP = 20050614084818
SCRIPT_TEST = t/check_rpc.t
SET_MAKE =
SH = /usr/bin/sh
SHELL = /bin/bash
SOCKETLIBS = -lnsl -lsocket -lresolv
SSLINCLUDE =
SSLLIBS = -lssl -lcrypto
STDBOOL_H =
STRIP =
SUPPORT = Send email to nagios-users@lists.sourceforge.net if you have questions\nregarding use of this software. To submit patches or suggest improvements,\nsend email to nagiosplug-devel@lists.sourceforge.net.\nPlease include version information with all correspondence (when possible,\nuse output from the --version option of the plugin itself).\n
USE_INCLUDED_LIBINTL = no
USE_NLS = no
VERSION = 1.4
WARRANTY = The nagios plugins come with ABSOLUTELY NO WARRANTY. You may redistribute\ncopies of the plugins under the terms of the GNU General Public License.\nFor more information about these matters, see the file named COPYING.\n
XGETTEXT = /usr/local/bin/xgettext
ac_ct_CC = gcc
ac_ct_RANLIB = ranlib
ac_ct_STRIP =
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE =
am__include = include
am__leading_dot = .
am__quote =
bindir = ${exec_prefix}/bin
build = sparc-sun-solaris2.9
build_alias =
build_cpu = sparc
build_os = solaris2.9
build_vendor = sun
check_mysql_LDFLAGS =
check_tcp_ssl =
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = sparc-sun-solaris2.9
host_alias =
host_cpu = sparc
host_os = solaris2.9
host_vendor = sun
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /export/home/reppocs/nagios-plugins-1.4/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
mkdir_p = mkdir -m 0755 -p --
oldincludedir = /usr/include
prefix = /usr/local/nagios
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target_alias =
with_nagios_group = nagios
with_nagios_user = nagios
with_trusted_path = /bin:/sbin:/usr/bin:/usr/sbin
SUBDIRS = intl lib plugins plugins-scripts m4 po
EXTRA_DIST = config.rpath \
ABOUT-NLS ACKNOWLEDGEMENTS AUTHORS BUGS CHANGES CODING FAQ LEGAL \
REQUIREMENTS SUPPORT THANKS \
Helper.pm contrib pkg nagios-plugins.spec
ACLOCAL_AMFLAGS = -I m4
localedir = $(datadir)/locale
# Solaris pkgmk
BUILDDIR = build-solaris
PACKDIR = build-pkg
PKGSCRIPT = pkg/solaris/solpkg
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh:
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
cd $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(am__configure_deps)
cd $(top_srcdir) && $(AUTOHEADER)
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
command.cfg: $(top_builddir)/config.status $(srcdir)/command.cfg.in
cd $(top_builddir) && $(SHELL) ./config.status $@
test.pl: $(top_builddir)/config.status $(srcdir)/test.pl.in
cd $(top_builddir) && $(SHELL) ./config.status $@
pkg/solaris/pkginfo: $(top_builddir)/config.status $(top_srcdir)/pkg/solaris/pkginfo.in
cd $(top_builddir) && $(SHELL) ./config.status $@
intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if (etags --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
else \
include_option=--include; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$tags$$unique" \
|| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkdir_p) $(distdir)/. $(distdir)/intl $(distdir)/m4 $(distdir)/pkg/solaris $(distdir)/plugins-scripts $(distdir)/po
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| mkdir "$(distdir)/$$subdir" \
|| exit 1; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="../$(top_distdir)" \
distdir="../$(distdir)/$$subdir" \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
--with-included-gettext \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && $(mkdir_p) "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am:
install-exec-am:
install-info: install-info-recursive
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-info-am
uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
check-am clean clean-generic clean-recursive ctags \
ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
dist-tarZ dist-zip distcheck distclean distclean-generic \
distclean-hdr distclean-recursive distclean-tags \
distcleancheck distdir distuninstallcheck dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic maintainer-clean-recursive \
mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
uninstall-info-am
dist-hook:
make THANKS nagios-plugins.spec pkg/fedora/nagios-plugins.spec
test:
cd plugins; $(MAKE) test
cd plugins-scripts; $(MAKE) test
nagios-plugins.spec: nagios-plugins.spec.in
sed "s/%%{VERSION}/${VERSION}/;s/%%{RELEASE}/${RELEASE}/;s/^%%{requires}$$//" $? > $@
pkg/fedora/nagios-plugins.spec: nagios-plugins.spec.in
$(top_srcdir)/mkinstalldirs pkg/fedora
sed "s/%%{VERSION}/${VERSION}/;s/%%{RELEASE}/${RELEASE}/;/^# Requires$$/r $(top_srcdir)/pkg/fedora/requires" $? > $@
solpkg:
if [ ! -d $(BUILDDIR) ] ; then mkdir $(BUILDDIR); fi
if [ ! -d $(PACKDIR) ] ; then mkdir $(PACKDIR); fi
$(MAKE) all
$(MAKE) DESTDIR=$$PWD/$(BUILDDIR) install
$(INSTALL) pkg/solaris/pkginfo $(BUILDDIR)
cd $(BUILDDIR) && $(PERL) ../$(PKGSCRIPT) ../$(PACKDIR)
THANKS: THANKS.in
@echo "This software is brought to you by the Nagios Plugins Development Team. However," > $@
@echo "there have been many contributors to this project. Everyone below has helped in " >> $@
@echo "raising bug reports, creating patches or contributing new plugins." >> $@
@echo "" >> $@
perl -e ' while (<>) { print STDERR "Duplicate: $$_",$$/ if ($$a{$$_}) ; $$a{$$_}++}; print sort by_last_field (keys %a); sub by_last_field { ($$a1) = $$a =~ /\s(\w+)$$/; ($$b1) = $$b =~ /\s(\w+)$$/; $$a1 cmp $$b1}' $? >> $@
pkgclean:
rm -rf $(BUILDDIR) $(PACKDIR)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: