rendered paste bodydaemon:May 22 01:31:03 ubuntu-890-base init: tty4 main process (4768) killed by TERM signalMay 22 01:31:03 ubuntu-890-base init: tty5 main process (4769) killed by TERM signalMay 22 01:31:03 ubuntu-890-base init: tty2 main process (4774) killed by TERM signalMay 22 01:31:03 ubuntu-890-base init: tty3 main process (4775) killed by TERM signalMay 22 01:31:03 ubuntu-890-base init: tty6 main process (4776) killed by TERM signalMay 22 01:31:03 ubuntu-890-base init: tty1 main process (5311) killed by TERM signalMay 22 01:31:06 ubuntu-890-base avahi-daemon[29280]: Got SIGTERM, quitting.May 22 01:31:06 ubuntu-890-base avahi-daemon[29280]: Leaving mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 22 01:31:06 ubuntu-890-base avahi-daemon[29280]: Leaving mDNS multicast group on interface eth0.IPv4 with address 169.254.7.93.May 22 01:31:07 ubuntu-890-base mysqld[4992]: 090522 1:31:07 [Note] /usr/sbin/mysqld: Normal shutdownMay 22 01:31:07 ubuntu-890-base mysqld[4992]: May 22 01:31:07 ubuntu-890-base mysqld[4992]: 090522 1:31:07 InnoDB: Starting shutdown...May 22 01:31:08 ubuntu-890-base mysqld[4992]: 090522 1:31:08 InnoDB: Shutdown completed; log sequence number 0 43655May 22 01:31:08 ubuntu-890-base mysqld[4992]: 090522 1:31:08 [Note] /usr/sbin/mysqld: Shutdown completeMay 22 01:31:08 ubuntu-890-base mysqld[4992]: May 22 01:31:08 ubuntu-890-base mysqld_safe[14492]: endedMay 22 01:31:14 ubuntu-890-base named[4870]: shutting down: flushing changesMay 22 01:31:14 ubuntu-890-base named[4870]: stopping command channel on 127.0.0.1#953May 22 01:31:14 ubuntu-890-base named[4870]: stopping command channel on ::1#953May 22 01:31:14 ubuntu-890-base named[4870]: no longer listening on ::#53May 22 01:31:14 ubuntu-890-base named[4870]: no longer listening on 127.0.0.1#53May 22 01:31:14 ubuntu-890-base named[4870]: no longer listening on 192.168.2.3#53May 22 01:31:14 ubuntu-890-base named[4870]: exitingMay 22 01:32:11 ubuntu-890-base NetworkManager: <info> starting... May 22 01:32:13 ubuntu-890-base named[5488]: starting BIND 9.4.2-P2 -u bindMay 22 01:32:13 ubuntu-890-base named[5488]: found 2 CPUs, using 2 worker threadsMay 22 01:32:13 ubuntu-890-base named[5488]: loading configuration from '/etc/bind/named.conf'May 22 01:32:13 ubuntu-890-base named[5488]: listening on IPv6 interfaces, port 53May 22 01:32:13 ubuntu-890-base named[5488]: listening on IPv4 interface lo, 127.0.0.1#53May 22 01:32:13 ubuntu-890-base named[5488]: listening on IPv4 interface eth2, 192.168.2.3#53May 22 01:32:13 ubuntu-890-base named[5488]: automatic empty zone: 254.169.IN-ADDR.ARPAMay 22 01:32:13 ubuntu-890-base named[5488]: automatic empty zone: 2.0.192.IN-ADDR.ARPAMay 22 01:32:13 ubuntu-890-base named[5488]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPAMay 22 01:32:13 ubuntu-890-base named[5488]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPAMay 22 01:32:13 ubuntu-890-base named[5488]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPAMay 22 01:32:13 ubuntu-890-base named[5488]: automatic empty zone: D.F.IP6.ARPAMay 22 01:32:13 ubuntu-890-base named[5488]: automatic empty zone: 8.E.F.IP6.ARPAMay 22 01:32:13 ubuntu-890-base named[5488]: automatic empty zone: 9.E.F.IP6.ARPAMay 22 01:32:13 ubuntu-890-base named[5488]: automatic empty zone: A.E.F.IP6.ARPAMay 22 01:32:13 ubuntu-890-base named[5488]: automatic empty zone: B.E.F.IP6.ARPAMay 22 01:32:13 ubuntu-890-base named[5488]: command channel listening on 127.0.0.1#953May 22 01:32:13 ubuntu-890-base named[5488]: command channel listening on ::1#953May 22 01:32:13 ubuntu-890-base named[5488]: zone 0.in-addr.arpa/IN: loaded serial 1May 22 01:32:13 ubuntu-890-base named[5488]: zone 127.in-addr.arpa/IN: loaded serial 1May 22 01:32:13 ubuntu-890-base named[5488]: zone 255.in-addr.arpa/IN: loaded serial 1May 22 01:32:13 ubuntu-890-base named[5488]: zone localhost/IN: loaded serial 2May 22 01:32:13 ubuntu-890-base named[5488]: runningMay 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: Found user 'avahi' (UID 115) and group 'avahi' (GID 128).May 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: Successfully dropped root privileges.May 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: avahi-daemon 0.6.22 starting up.May 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: Successfully called chroot().May 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: Successfully dropped remaining capabilities.May 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: No service file found in /etc/avahi/services.May 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: Joining mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: New relevant interface eth2.IPv4 for mDNS.May 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: Network interface enumeration completed.May 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: Registering new address record for fe80::204:76ff:feec:c7d6 on eth2.*.May 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: Registering new address record for 192.168.2.3 on eth2.IPv4.May 22 01:32:13 ubuntu-890-base avahi-daemon[5544]: Registering HINFO record with values 'X86_64'/'LINUX'.May 22 01:32:14 ubuntu-890-base mysqld_safe[5636]: startedMay 22 01:32:14 ubuntu-890-base avahi-daemon[5544]: Server startup complete. Host name is ubuntu-890-base.local. Local service cookie is 1512810012.May 22 01:32:14 ubuntu-890-base mysqld[5639]: 090522 1:32:14 InnoDB: Started; log sequence number 0 43655May 22 01:32:14 ubuntu-890-base mysqld[5639]: 090522 1:32:14 [Note] /usr/sbin/mysqld: ready for connections.May 22 01:32:14 ubuntu-890-base mysqld[5639]: Version: '5.0.51a-3ubuntu5.4' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu)May 22 01:32:15 ubuntu-890-base /etc/mysql/debian-start[5677]: Upgrading MySQL tables if necessary.May 22 01:32:15 ubuntu-890-base /etc/mysql/debian-start[5682]: Looking for 'mysql' in: /usr/bin/mysqlMay 22 01:32:15 ubuntu-890-base /etc/mysql/debian-start[5682]: Looking for 'mysqlcheck' in: /usr/bin/mysqlcheckMay 22 01:32:15 ubuntu-890-base /etc/mysql/debian-start[5682]: This installation of MySQL is already upgraded to 5.0.51a, use --force if you still need to run mysql_upgradeMay 22 01:32:15 ubuntu-890-base /etc/mysql/debian-start[5694]: Checking for insecure root accounts.May 22 01:32:15 ubuntu-890-base /etc/mysql/debian-start[5707]: Checking for crashed MySQL tables.May 22 01:32:23 ubuntu-890-base hcid[6118]: Bluetooth HCI daemonMay 22 01:32:23 ubuntu-890-base NetworkManager: <info> eth1: Device is fully-supported using driver 'forcedeth'. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start May 22 01:32:23 ubuntu-890-base NetworkManager: <info> nm_device_init(): device's worker thread started, continuing. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth1'. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Deactivating device eth1. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> eth0: Device is fully-supported using driver 'forcedeth'. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start May 22 01:32:23 ubuntu-890-base NetworkManager: <info> nm_device_init(): device's worker thread started, continuing. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Deactivating device eth0. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Will activate wired connection 'eth1' because it now has a link. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Will activate wired connection 'eth0' because it now has a link. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> SWITCH: no current connection, found better connection 'eth0'. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Will activate connection 'eth0'. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Device eth0 activation scheduled... May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Activation (eth0) started... May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. May 22 01:32:23 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... May 22 01:32:23 ubuntu-890-base hcid[6118]: Starting SDP serverMay 22 01:32:23 ubuntu-890-base hcid[6118]: Created local server at unix:abstract=/var/run/dbus-nTZe8En8wF,guid=defbebfa838dee53ba7398394a1638e7May 22 01:32:23 ubuntu-890-base NetworkManager: <debug> [1242970343.262756] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). May 22 01:32:23 ubuntu-890-base input[6166]: Bluetooth Input daemonMay 22 01:32:23 ubuntu-890-base input[6166]: Registered input manager path:/org/bluez/inputMay 22 01:32:23 ubuntu-890-base audio[6197]: Bluetooth Audio daemonMay 22 01:32:23 ubuntu-890-base audio[6197]: Unix socket created: 5May 22 01:32:23 ubuntu-890-base audio[6197]: audio.conf: Key file does not have key 'Enable'May 22 01:32:23 ubuntu-890-base audio[6197]: audio.conf: Key file does not have key 'Disable'May 22 01:32:23 ubuntu-890-base audio[6197]: add_service_record: got record id 0x10000May 22 01:32:23 ubuntu-890-base audio[6197]: audio.conf: Key file does not have key 'Disable'May 22 01:32:23 ubuntu-890-base audio[6197]: audio.conf: Key file does not have group 'A2DP'May 22 01:32:23 ubuntu-890-base last message repeated 3 timesMay 22 01:32:23 ubuntu-890-base audio[6197]: SEP 0x62d390 registered: type:0 codec:0 seid:1May 22 01:32:23 ubuntu-890-base audio[6197]: add_service_record: got record id 0x10001May 22 01:32:23 ubuntu-890-base audio[6197]: add_service_record: got record id 0x10002May 22 01:32:23 ubuntu-890-base audio[6197]: add_service_record: got record id 0x10003May 22 01:32:23 ubuntu-890-base audio[6197]: Registered manager path:/org/bluez/audioMay 22 01:32:23 ubuntu-890-base hal_lpadmin: addMay 22 01:32:23 ubuntu-890-base hal_lpadmin: URIs: ['usb://Lexmark/%206500%20Series', 'hal:///org/freedesktop/Hal/devices/usb_device_43d_10f_16Y068531148173_if1_printer_noserial']May 22 01:32:23 ubuntu-890-base hal_lpadmin: HPLIP Fax URIs: NoneMay 22 01:32:23 ubuntu-890-base hal_lpadmin: Not adding printer: _6500_Series already existsMay 22 01:32:23 ubuntu-890-base NetworkManager: <debug> [1242970343.445255] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_43d_10f_16Y068531148173_if1_printer_noserial'). May 22 01:32:24 ubuntu-890-base NetworkManager: <info> Activation (eth0) Beginning DHCP transaction. May 22 01:32:24 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. May 22 01:32:24 ubuntu-890-base NetworkManager: <info> DHCP daemon state is now 12 (successfully started) for interface eth0 May 22 01:32:24 ubuntu-890-base NetworkManager: <info> SWITCH: terminating current connection 'eth0' because it's no longer valid. May 22 01:32:24 ubuntu-890-base NetworkManager: <info> Deactivating device eth0. May 22 01:32:24 ubuntu-890-base NetworkManager: <info> Activation (eth0): cancelling... May 22 01:32:24 ubuntu-890-base NetworkManager: <info> Activation (eth0) cancellation handler scheduled... May 22 01:32:24 ubuntu-890-base NetworkManager: <info> Activation (eth0): waiting for device to cancel activation. May 22 01:32:25 ubuntu-890-base NetworkManager: <info> Activation (eth0): waiting for device to cancel activation. May 22 01:32:25 ubuntu-890-base NetworkManager: <info> Activation (eth0) cancellation handled. May 22 01:32:25 ubuntu-890-base NetworkManager: <info> Activation (eth0): cancelled. May 22 01:32:25 ubuntu-890-base NetworkManager: nm_device_is_802_3_ethernet: assertion `dev != NULL' failedMay 22 01:32:25 ubuntu-890-base NetworkManager: nm_device_is_802_11_wireless: assertion `dev != NULL' failedMay 22 01:32:28 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8May 22 01:32:36 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18May 22 01:32:54 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18May 22 01:33:07 ubuntu-890-base hcid[6118]: Default passkey agent (:1.21, /org/bluez/passkey) registeredMay 22 01:33:07 ubuntu-890-base hcid[6118]: Default authorization agent (:1.21, /org/bluez/auth) registeredMay 22 01:33:11 ubuntu-890-base NetworkManager: <info> Updating allowed wireless network lists. May 22 01:33:11 ubuntu-890-base NetworkManager: <WARN> nm_dbus_get_networks_cb(): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored.. May 22 01:33:12 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15May 22 01:33:27 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 2May 22 01:33:29 ubuntu-890-base dhclient: No DHCPOFFERS received.May 22 01:33:29 ubuntu-890-base avahi-autoipd(eth0)[6760]: Found user 'avahi-autoipd' (UID 111) and group 'avahi-autoipd' (GID 122).May 22 01:33:29 ubuntu-890-base avahi-autoipd(eth0)[6760]: Successfully called chroot().May 22 01:33:29 ubuntu-890-base avahi-autoipd(eth0)[6760]: Successfully dropped root privileges.May 22 01:33:29 ubuntu-890-base avahi-autoipd(eth0)[6760]: Starting with address 169.254.7.93May 22 01:33:34 ubuntu-890-base avahi-autoipd(eth0)[6760]: Callout BIND, address 169.254.7.93 on interface eth0May 22 01:33:34 ubuntu-890-base avahi-daemon[5544]: Joining mDNS multicast group on interface eth0.IPv4 with address 169.254.7.93.May 22 01:33:34 ubuntu-890-base avahi-daemon[5544]: New relevant interface eth0.IPv4 for mDNS.May 22 01:33:34 ubuntu-890-base avahi-daemon[5544]: Registering new address record for 169.254.7.93 on eth0.IPv4.May 22 01:33:38 ubuntu-890-base avahi-autoipd(eth0)[6760]: Successfully claimed IP address 169.254.7.93May 22 02:26:13 ubuntu-890-base NetworkManager: <debug> [1242973573.220198] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_label_SmrtInvEst050121'). May 22 02:32:13 ubuntu-890-base named[5488]: listening on IPv4 interface eth0:avahi, 169.254.7.93#53May 22 03:39:11 ubuntu-890-base dhclient: There is already a pid file /var/run/dhclient.eth2.pid with pid 4919May 22 03:39:11 ubuntu-890-base dhclient: killed old client process, removed PID fileMay 22 03:39:11 ubuntu-890-base dhclient: Internet Systems Consortium DHCP Client V3.0.6May 22 03:39:11 ubuntu-890-base dhclient: Copyright 2004-2007 Internet Systems Consortium.May 22 03:39:11 ubuntu-890-base dhclient: All rights reserved.May 22 03:39:11 ubuntu-890-base dhclient: For info, please visit http://www.isc.org/sw/dhcp/May 22 03:39:11 ubuntu-890-base dhclient: May 22 03:39:11 ubuntu-890-base dhclient: Listening on LPF/eth2/00:04:76:ec:c7:d6May 22 03:39:11 ubuntu-890-base dhclient: Sending on LPF/eth2/00:04:76:ec:c7:d6May 22 03:39:11 ubuntu-890-base dhclient: Sending on Socket/fallbackMay 22 03:39:12 ubuntu-890-base avahi-daemon[5544]: Interface eth2.IPv4 no longer relevant for mDNS.May 22 03:39:12 ubuntu-890-base avahi-daemon[5544]: Leaving mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 22 03:39:12 ubuntu-890-base avahi-daemon[5544]: Withdrawing address record for fe80::204:76ff:feec:c7d6 on eth2.May 22 03:39:12 ubuntu-890-base avahi-daemon[5544]: Withdrawing address record for 192.168.2.3 on eth2.May 22 03:39:12 ubuntu-890-base avahi-daemon[5544]: Joining mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 22 03:39:12 ubuntu-890-base avahi-daemon[5544]: New relevant interface eth2.IPv4 for mDNS.May 22 03:39:12 ubuntu-890-base avahi-daemon[5544]: Registering new address record for 192.168.2.3 on eth2.IPv4.May 22 03:39:12 ubuntu-890-base dhclient: There is already a pid file /var/run/dhclient.eth2.pid with pid 0May 22 03:39:12 ubuntu-890-base dhclient: Internet Systems Consortium DHCP Client V3.0.6May 22 03:39:12 ubuntu-890-base dhclient: Copyright 2004-2007 Internet Systems Consortium.May 22 03:39:12 ubuntu-890-base dhclient: All rights reserved.May 22 03:39:12 ubuntu-890-base dhclient: For info, please visit http://www.isc.org/sw/dhcp/May 22 03:39:12 ubuntu-890-base dhclient: May 22 03:39:12 ubuntu-890-base avahi-daemon[5544]: Withdrawing address record for 192.168.2.3 on eth2.May 22 03:39:12 ubuntu-890-base avahi-daemon[5544]: Leaving mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 22 03:39:12 ubuntu-890-base avahi-daemon[5544]: Interface eth2.IPv4 no longer relevant for mDNS.May 22 03:39:13 ubuntu-890-base dhclient: Listening on LPF/eth2/00:04:76:ec:c7:d6May 22 03:39:13 ubuntu-890-base dhclient: Sending on LPF/eth2/00:04:76:ec:c7:d6May 22 03:39:13 ubuntu-890-base dhclient: Sending on Socket/fallbackMay 22 03:39:13 ubuntu-890-base dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 6May 22 03:39:13 ubuntu-890-base dhclient: DHCPOFFER of 192.168.2.3 from 192.168.2.1May 22 03:39:13 ubuntu-890-base dhclient: DHCPREQUEST of 192.168.2.3 on eth2 to 255.255.255.255 port 67May 22 03:39:14 ubuntu-890-base avahi-daemon[5544]: Registering new address record for fe80::204:76ff:feec:c7d6 on eth2.*.May 22 03:39:14 ubuntu-890-base dhclient: DHCPACK of 192.168.2.3 from 192.168.2.1May 22 03:39:14 ubuntu-890-base avahi-daemon[5544]: Joining mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 22 03:39:14 ubuntu-890-base avahi-daemon[5544]: New relevant interface eth2.IPv4 for mDNS.May 22 03:39:14 ubuntu-890-base avahi-daemon[5544]: Registering new address record for 192.168.2.3 on eth2.IPv4.May 22 03:39:14 ubuntu-890-base dhclient: bound to 192.168.2.3 -- renewal in 2147483648 seconds.May 22 03:39:14 ubuntu-890-base ntpdate[8078]: step time server 91.189.94.4 offset -0.523490 secMay 22 12:03:55 ubuntu-890-base ntpdate[5201]: step time server 91.189.94.4 offset -2.298986 secMay 22 12:03:55 ubuntu-890-base NetworkManager: <info> starting... May 22 12:03:57 ubuntu-890-base named[5492]: starting BIND 9.4.2-P2 -u bindMay 22 12:03:57 ubuntu-890-base named[5492]: found 2 CPUs, using 2 worker threadsMay 22 12:03:57 ubuntu-890-base named[5492]: loading configuration from '/etc/bind/named.conf'May 22 12:03:57 ubuntu-890-base named[5492]: listening on IPv6 interfaces, port 53May 22 12:03:57 ubuntu-890-base named[5492]: listening on IPv4 interface lo, 127.0.0.1#53May 22 12:03:57 ubuntu-890-base named[5492]: listening on IPv4 interface eth2, 192.168.2.3#53May 22 12:03:57 ubuntu-890-base named[5492]: automatic empty zone: 254.169.IN-ADDR.ARPAMay 22 12:03:57 ubuntu-890-base named[5492]: automatic empty zone: 2.0.192.IN-ADDR.ARPAMay 22 12:03:57 ubuntu-890-base named[5492]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPAMay 22 12:03:57 ubuntu-890-base named[5492]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPAMay 22 12:03:57 ubuntu-890-base named[5492]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPAMay 22 12:03:57 ubuntu-890-base named[5492]: automatic empty zone: D.F.IP6.ARPAMay 22 12:03:57 ubuntu-890-base named[5492]: automatic empty zone: 8.E.F.IP6.ARPAMay 22 12:03:57 ubuntu-890-base named[5492]: automatic empty zone: 9.E.F.IP6.ARPAMay 22 12:03:57 ubuntu-890-base named[5492]: automatic empty zone: A.E.F.IP6.ARPAMay 22 12:03:57 ubuntu-890-base named[5492]: automatic empty zone: B.E.F.IP6.ARPAMay 22 12:03:57 ubuntu-890-base named[5492]: command channel listening on 127.0.0.1#953May 22 12:03:57 ubuntu-890-base named[5492]: command channel listening on ::1#953May 22 12:03:57 ubuntu-890-base named[5492]: zone 0.in-addr.arpa/IN: loaded serial 1May 22 12:03:57 ubuntu-890-base named[5492]: zone 127.in-addr.arpa/IN: loaded serial 1May 22 12:03:57 ubuntu-890-base named[5492]: zone 255.in-addr.arpa/IN: loaded serial 1May 22 12:03:57 ubuntu-890-base named[5492]: zone localhost/IN: loaded serial 2May 22 12:03:57 ubuntu-890-base named[5492]: runningMay 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: Found user 'avahi' (UID 115) and group 'avahi' (GID 128).May 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: Successfully dropped root privileges.May 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: avahi-daemon 0.6.22 starting up.May 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: Successfully called chroot().May 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: Successfully dropped remaining capabilities.May 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: No service file found in /etc/avahi/services.May 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: Joining mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: New relevant interface eth2.IPv4 for mDNS.May 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: Network interface enumeration completed.May 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: Registering new address record for fe80::204:76ff:feec:c7d6 on eth2.*.May 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: Registering new address record for 192.168.2.3 on eth2.IPv4.May 22 12:03:57 ubuntu-890-base avahi-daemon[5548]: Registering HINFO record with values 'X86_64'/'LINUX'.May 22 12:03:58 ubuntu-890-base mysqld_safe[5640]: startedMay 22 12:03:58 ubuntu-890-base avahi-daemon[5548]: Server startup complete. Host name is ubuntu-890-base.local. Local service cookie is 478382380.May 22 12:03:58 ubuntu-890-base mysqld[5643]: 090522 12:03:58 InnoDB: Started; log sequence number 0 43655May 22 12:03:58 ubuntu-890-base mysqld[5643]: 090522 12:03:58 [Note] /usr/sbin/mysqld: ready for connections.May 22 12:03:58 ubuntu-890-base mysqld[5643]: Version: '5.0.51a-3ubuntu5.4' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu)May 22 12:03:59 ubuntu-890-base /etc/mysql/debian-start[5681]: Upgrading MySQL tables if necessary.May 22 12:03:59 ubuntu-890-base /etc/mysql/debian-start[5685]: Looking for 'mysql' in: /usr/bin/mysqlMay 22 12:03:59 ubuntu-890-base /etc/mysql/debian-start[5685]: Looking for 'mysqlcheck' in: /usr/bin/mysqlcheckMay 22 12:03:59 ubuntu-890-base /etc/mysql/debian-start[5685]: This installation of MySQL is already upgraded to 5.0.51a, use --force if you still need to run mysql_upgradeMay 22 12:03:59 ubuntu-890-base /etc/mysql/debian-start[5698]: Checking for insecure root accounts.May 22 12:03:59 ubuntu-890-base /etc/mysql/debian-start[5711]: Checking for crashed MySQL tables.May 22 12:04:06 ubuntu-890-base hcid[6136]: Bluetooth HCI daemonMay 22 12:04:06 ubuntu-890-base NetworkManager: <info> eth1: Device is fully-supported using driver 'forcedeth'. May 22 12:04:06 ubuntu-890-base NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start May 22 12:04:06 ubuntu-890-base NetworkManager: <info> nm_device_init(): device's worker thread started, continuing. May 22 12:04:06 ubuntu-890-base NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth1'. May 22 12:04:06 ubuntu-890-base NetworkManager: <info> Deactivating device eth1. May 22 12:04:06 ubuntu-890-base hcid[6136]: Starting SDP serverMay 22 12:04:06 ubuntu-890-base NetworkManager: <info> eth0: Device is fully-supported using driver 'forcedeth'. May 22 12:04:06 ubuntu-890-base hcid[6136]: Created local server at unix:abstract=/var/run/dbus-temQt7gPBJ,guid=e45623accb6d95f9699a76aa4a16ccf6May 22 12:04:06 ubuntu-890-base NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start May 22 12:04:06 ubuntu-890-base NetworkManager: <info> nm_device_init(): device's worker thread started, continuing. May 22 12:04:06 ubuntu-890-base NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'. May 22 12:04:06 ubuntu-890-base NetworkManager: <info> Deactivating device eth0. May 22 12:04:06 ubuntu-890-base NetworkManager: <info> Will activate wired connection 'eth1' because it now has a link. May 22 12:04:06 ubuntu-890-base NetworkManager: <info> Will activate wired connection 'eth0' because it now has a link. May 22 12:04:06 ubuntu-890-base NetworkManager: <debug> [1243008246.175925] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_model_LTR_52327S'). May 22 12:04:06 ubuntu-890-base NetworkManager: <debug> [1243008246.176400] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). May 22 12:04:06 ubuntu-890-base NetworkManager: <info> SWITCH: no current connection, found better connection 'eth0'. May 22 12:04:06 ubuntu-890-base input[6160]: Bluetooth Input daemonMay 22 12:04:06 ubuntu-890-base audio[6190]: Bluetooth Audio daemonMay 22 12:04:06 ubuntu-890-base input[6160]: Registered input manager path:/org/bluez/inputMay 22 12:04:06 ubuntu-890-base audio[6190]: Unix socket created: 5May 22 12:04:06 ubuntu-890-base audio[6190]: audio.conf: Key file does not have key 'Enable'May 22 12:04:06 ubuntu-890-base audio[6190]: audio.conf: Key file does not have key 'Disable'May 22 12:04:06 ubuntu-890-base audio[6190]: add_service_record: got record id 0x10000May 22 12:04:06 ubuntu-890-base audio[6190]: audio.conf: Key file does not have key 'Disable'May 22 12:04:06 ubuntu-890-base audio[6190]: audio.conf: Key file does not have group 'A2DP'May 22 12:04:06 ubuntu-890-base last message repeated 3 timesMay 22 12:04:06 ubuntu-890-base audio[6190]: SEP 0x62d390 registered: type:0 codec:0 seid:1May 22 12:04:06 ubuntu-890-base audio[6190]: add_service_record: got record id 0x10001May 22 12:04:06 ubuntu-890-base audio[6190]: add_service_record: got record id 0x10002May 22 12:04:06 ubuntu-890-base audio[6190]: add_service_record: got record id 0x10003May 22 12:04:06 ubuntu-890-base audio[6190]: Registered manager path:/org/bluez/audioMay 22 12:04:06 ubuntu-890-base hal_lpadmin: addMay 22 12:04:06 ubuntu-890-base hal_lpadmin: URIs: ['usb://Lexmark/%206500%20Series', 'hal:///org/freedesktop/Hal/devices/usb_device_43d_10f_16Y068531148173_if1_printer_noserial']May 22 12:04:06 ubuntu-890-base hal_lpadmin: HPLIP Fax URIs: NoneMay 22 12:04:06 ubuntu-890-base hal_lpadmin: Not adding printer: _6500_Series already existsMay 22 12:04:07 ubuntu-890-base NetworkManager: <info> Will activate connection 'eth0'. May 22 12:04:07 ubuntu-890-base NetworkManager: <info> Device eth0 activation scheduled... May 22 12:04:07 ubuntu-890-base NetworkManager: <debug> [1243008247.168144] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_43d_10f_16Y068531148173_if1_printer_noserial'). May 22 12:04:07 ubuntu-890-base NetworkManager: <info> Activation (eth0) started... May 22 12:04:07 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... May 22 12:04:07 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... May 22 12:04:07 ubuntu-890-base NetworkManager: <info> Activation (eth0) failure scheduled... May 22 12:04:07 ubuntu-890-base NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. May 22 12:04:07 ubuntu-890-base NetworkManager: <info> Activation (eth0) failed. May 22 12:04:07 ubuntu-890-base NetworkManager: <info> Deactivating device eth0. May 22 12:04:43 ubuntu-890-base gdm[6264]: WARNING: Couldn't authenticate user May 22 12:05:11 ubuntu-890-base hcid[6136]: Default passkey agent (:1.20, /org/bluez/passkey) registeredMay 22 12:05:11 ubuntu-890-base hcid[6136]: Default authorization agent (:1.20, /org/bluez/auth) registeredMay 22 12:05:16 ubuntu-890-base NetworkManager: <info> Updating allowed wireless network lists. May 22 12:05:16 ubuntu-890-base NetworkManager: <WARN> nm_dbus_get_networks_cb(): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored.. May 24 22:11:48 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3May 24 22:11:51 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3May 24 22:11:54 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6May 24 22:12:00 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13May 24 22:12:13 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19May 24 22:12:32 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11May 24 22:12:43 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6May 24 22:12:49 ubuntu-890-base dhclient: No DHCPOFFERS received.May 24 22:12:49 ubuntu-890-base dhclient: No working leases in persistent database - sleeping.May 24 22:14:58 ubuntu-890-base lircd-0.8.3pre1[16819]: garbage after 'name' token in line 335 ignoredMay 24 22:14:58 ubuntu-890-base lircd-0.8.3pre1[16820]: lircd(userspace) readyMay 24 22:15:17 ubuntu-890-base AppArmor(init): Skipping profile /etc/apparmor.d/usr.sbin.cupsd.dpkg-newMay 24 22:15:29 ubuntu-890-base squid[21146]: Squid Parent: child process 21149 startedMay 24 22:15:29 ubuntu-890-base squid[21149]: Starting Squid Cache version 2.6.STABLE18 for amd64-debian-linux-gnu...May 24 22:15:29 ubuntu-890-base squid[21149]: Process ID 21149May 24 22:15:29 ubuntu-890-base squid[21149]: With 1024 file descriptors availableMay 24 22:15:29 ubuntu-890-base squid[21149]: Using epoll for the IO loopMay 24 22:15:29 ubuntu-890-base squid[21149]: DNS Socket created at 0.0.0.0, port 60850, FD 7May 24 22:15:29 ubuntu-890-base squid[21149]: Adding domain Belkin from /etc/resolv.confMay 24 22:15:29 ubuntu-890-base squid[21149]: Adding nameserver 192.168.2.1 from /etc/resolv.confMay 24 22:15:29 ubuntu-890-base squid[21149]: User-Agent logging is disabled.May 24 22:15:29 ubuntu-890-base squid[21149]: Referer logging is disabled.May 24 22:15:29 ubuntu-890-base squid[21149]: Unlinkd pipe opened on FD 12May 24 22:15:29 ubuntu-890-base squid[21149]: Swap maxSize 102400 KB, estimated 7876 objectsMay 24 22:15:29 ubuntu-890-base squid[21149]: Target number of buckets: 393May 24 22:15:29 ubuntu-890-base squid[21149]: Using 8192 Store bucketsMay 24 22:15:29 ubuntu-890-base squid[21149]: Max Mem size: 8192 KBMay 24 22:15:29 ubuntu-890-base squid[21149]: Max Swap size: 102400 KBMay 24 22:15:29 ubuntu-890-base squid[21149]: Local cache digest enabled; rebuild/rewrite every 3600/3600 secMay 24 22:15:29 ubuntu-890-base squid[21149]: Rebuilding storage in /var/spool/squid (DIRTY)May 24 22:15:29 ubuntu-890-base squid[21149]: Using Least Load store dir selectionMay 24 22:15:29 ubuntu-890-base squid[21149]: Set Current Directory to /var/spool/squidMay 24 22:15:29 ubuntu-890-base squid[21149]: Loaded Icons.May 24 22:15:29 ubuntu-890-base squid[21149]: Accepting proxy HTTP connections at 0.0.0.0, port 3128, FD 13.May 24 22:15:29 ubuntu-890-base squid[21149]: Accepting ICP messages at 0.0.0.0, port 3130, FD 14.May 24 22:15:29 ubuntu-890-base squid[21149]: HTCP Disabled.May 24 22:15:29 ubuntu-890-base squid[21149]: WCCP Disabled.May 24 22:15:29 ubuntu-890-base squid[21149]: Ready to serve requests.May 24 22:15:29 ubuntu-890-base squid[21149]: Done scanning /var/spool/squid (0 entries)May 24 22:15:29 ubuntu-890-base squid[21149]: Finished rebuilding storage from disk.May 24 22:15:29 ubuntu-890-base squid[21149]: 0 Entries scannedMay 24 22:15:29 ubuntu-890-base squid[21149]: 0 Invalid entries.May 24 22:15:29 ubuntu-890-base squid[21149]: 0 With invalid flags.May 24 22:15:29 ubuntu-890-base squid[21149]: 0 Objects loaded.May 24 22:15:29 ubuntu-890-base squid[21149]: 0 Objects expired.May 24 22:15:29 ubuntu-890-base squid[21149]: 0 Objects cancelled.May 24 22:15:29 ubuntu-890-base squid[21149]: 0 Duplicate URLs purged.May 24 22:15:29 ubuntu-890-base squid[21149]: 0 Swapfile clashes avoided.May 24 22:15:29 ubuntu-890-base squid[21149]: Took 0.6 seconds ( 0.0 objects/sec).May 24 22:15:29 ubuntu-890-base squid[21149]: Beginning Validation ProcedureMay 24 22:15:29 ubuntu-890-base squid[21149]: Completed Validation ProcedureMay 24 22:15:29 ubuntu-890-base squid[21149]: Validated 0 EntriesMay 24 22:15:29 ubuntu-890-base squid[21149]: store_swap_size = 0kMay 24 22:15:30 ubuntu-890-base squid[21149]: storeLateRelease: released 0 objectsMay 24 22:15:35 ubuntu-890-base bld[21276]: listening on port 2905May 24 22:15:36 ubuntu-890-base arpwatch: Running as uid=124 gid=138May 24 22:15:36 ubuntu-890-base arpwatch: listening on eth0May 24 22:15:38 ubuntu-890-base AppArmor(init): Skipping profile /etc/apparmor.d/usr.sbin.cupsd.dpkg-newMay 24 22:16:03 ubuntu-890-base rpc.statd[28531]: Version 1.1.2 StartingMay 24 22:16:13 ubuntu-890-base snort[28880]: Var 'eth0:avahi_ADDRESS' defined, value len = 23 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = 169.254.0.0/255.255.0.0May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'any_ADDRESS' defined, value len = 15 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = 0.0.0.0/0.0.0.0May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'lo_ADDRESS' defined, value len = 19 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = 127.0.0.0/255.0.0.0May 24 22:16:13 ubuntu-890-base snort[28880]: Parsing Rules file /etc/snort/snort.confMay 24 22:16:13 ubuntu-890-base snort[28880]: Var 'HOME_NET' redefinedMay 24 22:16:13 ubuntu-890-base snort[28880]: Var 'EXTERNAL_NET' defined, value len = 3 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = anyMay 24 22:16:13 ubuntu-890-base snort[28880]: Var 'DNS_SERVERS' defined, value len = 17 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = [192.168.2.0/109]May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'SMTP_SERVERS' defined, value len = 17 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = [192.168.2.0/109]May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'HTTP_SERVERS' defined, value len = 17 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = [192.168.2.0/109]May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'SQL_SERVERS' defined, value len = 17 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = [192.168.2.0/109]May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'TELNET_SERVERS' defined, value len = 17 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = [192.168.2.0/109]May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'SNMP_SERVERS' defined, value len = 17 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = [192.168.2.0/109]May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'HTTP_PORTS' defined, value len = 2 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = 80May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'SHELLCODE_PORTS' defined, value len = 3 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = !80May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'ORACLE_PORTS' defined, value len = 4 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = 1521May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'AIM_SERVERS' defined, value len = 185 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: May 24 22:16:13 ubuntu-890-base snort[28880]: [64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9May 24 22:16:13 ubuntu-890-base snort[28880]: .0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24]May 24 22:16:13 ubuntu-890-base snort[28880]: Var 'RULE_PATH' defined, value len = 16 charsMay 24 22:16:13 ubuntu-890-base snort[28880]: , value = /etc/snort/rulesMay 24 22:16:13 ubuntu-890-base snort[28880]: ,-----------[Flow Config]----------------------May 24 22:16:13 ubuntu-890-base snort[28880]: | Stats Interval: 0May 24 22:16:13 ubuntu-890-base snort[28880]: | Hash Method: 2May 24 22:16:13 ubuntu-890-base snort[28880]: | Memcap: 10485760May 24 22:16:13 ubuntu-890-base snort[28880]: | Rows : 4099May 24 22:16:13 ubuntu-890-base snort[28880]: | Overhead Bytes: 32800(%0.31)May 24 22:16:13 ubuntu-890-base snort[28880]: `----------------------------------------------May 24 22:16:13 ubuntu-890-base snort[28880]: Frag3 global config:May 24 22:16:13 ubuntu-890-base snort[28880]: Max frags: 65536May 24 22:16:13 ubuntu-890-base snort[28880]: Fragment memory cap: 4194304 bytesMay 24 22:16:13 ubuntu-890-base snort[28880]: Frag3 engine config:May 24 22:16:13 ubuntu-890-base snort[28880]: Target-based policy: FIRSTMay 24 22:16:13 ubuntu-890-base snort[28880]: Fragment timeout: 60 secondsMay 24 22:16:13 ubuntu-890-base snort[28880]: Fragment min_ttl: 1May 24 22:16:13 ubuntu-890-base snort[28880]: Fragment ttl_limit: 5May 24 22:16:13 ubuntu-890-base snort[28880]: Fragment Problems: 1May 24 22:16:13 ubuntu-890-base snort[28880]: Bound Addresses: 0.0.0.0/0.0.0.0May 24 22:16:13 ubuntu-890-base snort[28880]: Stream5 global config:May 24 22:16:13 ubuntu-890-base snort[28880]: Track TCP sessions: ACTIVEMay 24 22:16:13 ubuntu-890-base snort[28880]: Max TCP sessions: 8192May 24 22:16:13 ubuntu-890-base snort[28880]: Memcap (for reassembly packet storage): 8388608May 24 22:16:13 ubuntu-890-base snort[28880]: Track UDP sessions: INACTIVEMay 24 22:16:13 ubuntu-890-base snort[28880]: Track ICMP sessions: INACTIVEMay 24 22:16:13 ubuntu-890-base snort[28880]: Stream5 TCP Policy config:May 24 22:16:13 ubuntu-890-base snort[28880]: Reassembly Policy: FIRSTMay 24 22:16:13 ubuntu-890-base snort[28880]: Timeout: 30 secondsMay 24 22:16:13 ubuntu-890-base snort[28880]: Min ttl: 1May 24 22:16:13 ubuntu-890-base snort[28880]: Options:May 24 22:16:13 ubuntu-890-base snort[28880]: Static Flushpoint Sizes: YESMay 24 22:16:13 ubuntu-890-base snort[28880]: Reassembly Ports:May 24 22:16:13 ubuntu-890-base snort[28880]: 21 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 23 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 25 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 42 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 53 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 80 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 110 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 111 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 135 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 136 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 137 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 139 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 143 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 445 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 513 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 1433 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 1521 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: 3306 client (Footprint) May 24 22:16:13 ubuntu-890-base snort[28880]: Bound Addresses:0.0.0.0/0.0.0.0May 24 22:16:13 ubuntu-890-base snort[28880]: HttpInspect Config:May 24 22:16:13 ubuntu-890-base snort[28880]: GLOBAL CONFIGMay 24 22:16:13 ubuntu-890-base snort[28880]: Max Pipeline Requests: 0May 24 22:16:13 ubuntu-890-base snort[28880]: Inspection Type: STATELESSMay 24 22:16:13 ubuntu-890-base snort[28880]: Detect Proxy Usage: NOMay 24 22:16:13 ubuntu-890-base snort[28880]: IIS Unicode Map Filename: /etc/snort/unicode.mapMay 24 22:16:13 ubuntu-890-base snort[28880]: IIS Unicode Map Codepage: 1252May 24 22:16:13 ubuntu-890-base snort[28880]: DEFAULT SERVER CONFIG:May 24 22:16:13 ubuntu-890-base snort[28880]: Server profile: AllMay 24 22:16:13 ubuntu-890-base snort[28880]: Ports: 80 8080 8180 May 24 22:16:13 ubuntu-890-base snort[28880]: Flow Depth: 300May 24 22:16:13 ubuntu-890-base snort[28880]: Max Chunk Length: 500000May 24 22:16:13 ubuntu-890-base snort[28880]: Inspect Pipeline Requests: YESMay 24 22:16:13 ubuntu-890-base snort[28880]: URI Discovery Strict Mode: NOMay 24 22:16:13 ubuntu-890-base snort[28880]: Allow Proxy Usage: NOMay 24 22:16:13 ubuntu-890-base snort[28880]: Disable Alerting: NOMay 24 22:16:13 ubuntu-890-base snort[28880]: Oversize Dir Length: 500May 24 22:16:13 ubuntu-890-base snort[28880]: Only inspect URI: NOMay 24 22:16:13 ubuntu-890-base snort[28880]: Ascii: YES alert: NOMay 24 22:16:13 ubuntu-890-base snort[28880]: Double Decoding: YES alert: YESMay 24 22:16:13 ubuntu-890-base snort[28880]: %U Encoding: YES alert: YESMay 24 22:16:13 ubuntu-890-base snort[28880]: Bare Byte: YES alert: YESMay 24 22:16:13 ubuntu-890-base snort[28880]: Base36: OFFMay 24 22:16:13 ubuntu-890-base snort[28880]: UTF 8: OFFMay 24 22:16:13 ubuntu-890-base snort[28880]: IIS Unicode: YES alert: YESMay 24 22:16:13 ubuntu-890-base snort[28880]: Multiple Slash: YES alert: NOMay 24 22:16:13 ubuntu-890-base snort[28880]: IIS Backslash: YES alert: NOMay 24 22:16:13 ubuntu-890-base snort[28880]: Directory Traversal: YES alert: NOMay 24 22:16:13 ubuntu-890-base snort[28880]: Web Root Traversal: YES alert: YESMay 24 22:16:13 ubuntu-890-base snort[28880]: Apache WhiteSpace: YES alert: NOMay 24 22:16:13 ubuntu-890-base snort[28880]: IIS Delimiter: YES alert: NOMay 24 22:16:13 ubuntu-890-base snort[28880]: IIS Unicode Map: GLOBAL IIS UNICODE MAP CONFIGMay 24 22:16:13 ubuntu-890-base snort[28880]: Non-RFC Compliant Characters: NONEMay 24 22:16:13 ubuntu-890-base snort[28880]: Whitespace Characters: 0x09 0x0b 0x0c 0x0d May 24 22:16:13 ubuntu-890-base snort[28880]: rpc_decode arguments:May 24 22:16:13 ubuntu-890-base snort[28880]: Ports to decode RPC on: 111 32771 May 24 22:16:13 ubuntu-890-base snort[28880]: alert_fragments: INACTIVEMay 24 22:16:13 ubuntu-890-base snort[28880]: alert_large_fragments: ACTIVEMay 24 22:16:13 ubuntu-890-base snort[28880]: alert_incomplete: ACTIVEMay 24 22:16:13 ubuntu-890-base snort[28880]: alert_multiple_requests: ACTIVEMay 24 22:16:13 ubuntu-890-base snort[28880]: Portscan Detection Config:May 24 22:16:13 ubuntu-890-base snort[28880]: Detect Protocols: TCP UDP ICMP IPMay 24 22:16:13 ubuntu-890-base snort[28880]: Detect Scan Type: portscan portsweep decoy_portscan distributed_portscanMay 24 22:16:13 ubuntu-890-base snort[28880]: Sensitivity Level: LowMay 24 22:16:13 ubuntu-890-base snort[28880]: Memcap (in bytes): 10000000May 24 22:16:13 ubuntu-890-base snort[28880]: Number of Nodes: 26109May 24 22:16:13 ubuntu-890-base snort[28880]: May 24 22:16:13 ubuntu-890-base snort[28880]: Tagged Packet Limit: 256May 24 22:16:13 ubuntu-890-base snort[28880]: May 24 22:16:13 ubuntu-890-base snort[28880]: +-----------------------[thresholding-config]----------------------------------May 24 22:16:13 ubuntu-890-base snort[28880]: | memory-cap : 1048576 bytesMay 24 22:16:13 ubuntu-890-base snort[28880]: +-----------------------[thresholding-global]----------------------------------May 24 22:16:13 ubuntu-890-base snort[28880]: | noneMay 24 22:16:13 ubuntu-890-base snort[28880]: +-----------------------[thresholding-local]-----------------------------------May 24 22:16:13 ubuntu-890-base snort[28880]: | noneMay 24 22:16:13 ubuntu-890-base snort[28880]: +-----------------------[suppression]------------------------------------------May 24 22:16:13 ubuntu-890-base snort[28880]: | noneMay 24 22:16:13 ubuntu-890-base snort[28880]: -------------------------------------------------------------------------------May 24 22:16:13 ubuntu-890-base snort[28880]: Rule application order: activation->dynamic->pass->drop->alert->logMay 24 22:16:13 ubuntu-890-base snort[28880]: Log directory = /var/log/snortMay 24 22:16:13 ubuntu-890-base snort[28880]: Loading dynamic engine /usr/lib/snort_dynamicengine/libsf_engine.so... May 24 22:16:14 ubuntu-890-base snort[28880]: doneMay 24 22:16:14 ubuntu-890-base snort[28880]: Loading all dynamic preprocessor libs from /usr/lib/snort_dynamicpreprocessor/...May 24 22:16:14 ubuntu-890-base snort[28880]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_ssh_preproc.so... May 24 22:16:14 ubuntu-890-base snort[28880]: doneMay 24 22:16:14 ubuntu-890-base snort[28880]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_dcerpc_preproc.so... May 24 22:16:14 ubuntu-890-base snort[28880]: doneMay 24 22:16:14 ubuntu-890-base snort[28880]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_dns_preproc.so... May 24 22:16:14 ubuntu-890-base snort[28880]: doneMay 24 22:16:14 ubuntu-890-base snort[28880]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_smtp_preproc.so... May 24 22:16:14 ubuntu-890-base snort[28880]: doneMay 24 22:16:14 ubuntu-890-base snort[28880]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_ftptelnet_preproc.so... May 24 22:16:14 ubuntu-890-base snort[28880]: doneMay 24 22:16:14 ubuntu-890-base snort[28880]: Finished Loading all dynamic preprocessor libs from /usr/lib/snort_dynamicpreprocessor/May 24 22:16:14 ubuntu-890-base snort[28880]: FTPTelnet Config:May 24 22:16:14 ubuntu-890-base snort[28880]: GLOBAL CONFIGMay 24 22:16:14 ubuntu-890-base snort[28880]: Inspection Type: statefulMay 24 22:16:14 ubuntu-890-base snort[28880]: Check for Encrypted Traffic: YES alert: YESMay 24 22:16:14 ubuntu-890-base snort[28880]: Continue to check encrypted data: NOMay 24 22:16:14 ubuntu-890-base snort[28880]: TELNET CONFIG:May 24 22:16:14 ubuntu-890-base snort[28880]: Ports: 23 May 24 22:16:14 ubuntu-890-base snort[28880]: Are You There Threshold: 200May 24 22:16:14 ubuntu-890-base snort[28880]: Normalize: YESMay 24 22:16:14 ubuntu-890-base snort[28880]: Detect Anomalies: NOMay 24 22:16:14 ubuntu-890-base snort[28880]: FTP CONFIG:May 24 22:16:14 ubuntu-890-base snort[28880]: FTP Server: defaultMay 24 22:16:14 ubuntu-890-base snort[28880]: Ports: 21 May 24 22:16:14 ubuntu-890-base snort[28880]: Check for Telnet Cmds: YES alert: YESMay 24 22:16:14 ubuntu-890-base snort[28880]: Identify open data channels: YESMay 24 22:16:14 ubuntu-890-base snort[28880]: FTP Client: defaultMay 24 22:16:14 ubuntu-890-base snort[28880]: Check for Bounce Attacks: YES alert: YESMay 24 22:16:14 ubuntu-890-base snort[28880]: Check for Telnet Cmds: YES alert: YESMay 24 22:16:14 ubuntu-890-base snort[28880]: Max Response Length: 256May 24 22:16:14 ubuntu-890-base snort[28880]: SMTP Config:May 24 22:16:14 ubuntu-890-base snort[28880]: Ports: May 24 22:16:14 ubuntu-890-base snort[28880]: 25 May 24 22:16:14 ubuntu-890-base snort[28880]: May 24 22:16:14 ubuntu-890-base snort[28880]: Inspection Type: STATEFULMay 24 22:16:14 ubuntu-890-base snort[28880]: Normalize Spaces: YESMay 24 22:16:14 ubuntu-890-base snort[28880]: Ignore Data: NOMay 24 22:16:14 ubuntu-890-base snort[28880]: Ignore TLS Data: NOMay 24 22:16:14 ubuntu-890-base snort[28880]: Ignore Alerts: NOMay 24 22:16:14 ubuntu-890-base snort[28880]: Max Command Length: 0May 24 22:16:14 ubuntu-890-base snort[28880]: Max Header Line Length: 0May 24 22:16:14 ubuntu-890-base snort[28880]: Max Response Line Length: 0May 24 22:16:14 ubuntu-890-base snort[28880]: X-Link2State Alert: YESMay 24 22:16:14 ubuntu-890-base snort[28880]: Drop on X-Link2State Alert: NOMay 24 22:16:14 ubuntu-890-base snort[28880]: DCE/RPC Decoder config:May 24 22:16:14 ubuntu-890-base snort[28880]: Autodetect ports ENABLEDMay 24 22:16:14 ubuntu-890-base snort[28880]: SMB fragmentation ENABLEDMay 24 22:16:14 ubuntu-890-base snort[28880]: DCE/RPC fragmentation ENABLEDMay 24 22:16:14 ubuntu-890-base snort[28880]: Max Frag Size: 3000 bytesMay 24 22:16:14 ubuntu-890-base snort[28880]: Memcap: 100000 KBMay 24 22:16:14 ubuntu-890-base snort[28880]: Alert if memcap exceeded DISABLEDMay 24 22:16:14 ubuntu-890-base snort[28880]: May 24 22:16:14 ubuntu-890-base snort[28880]: DNS config: May 24 22:16:14 ubuntu-890-base snort[28880]: DNS Client rdata txt Overflow Alert: ACTIVEMay 24 22:16:14 ubuntu-890-base snort[28880]: Obsolete DNS RR Types Alert: INACTIVEMay 24 22:16:14 ubuntu-890-base snort[28880]: Experimental DNS RR Types Alert: INACTIVEMay 24 22:16:14 ubuntu-890-base snort[28880]: Ports:May 24 22:16:14 ubuntu-890-base snort[28880]: 53May 24 22:16:14 ubuntu-890-base snort[28880]: May 24 22:16:14 ubuntu-890-base snort[28880]: Warning: flowbits key 'realplayer.playlist' is checked but not ever set.May 24 22:16:14 ubuntu-890-base snort[28880]: Warning: flowbits key 'smb.tree.create.llsrpc' is set but not ever checked.May 24 22:16:14 ubuntu-890-base snort[28880]: Warning: flowbits key 'ms_sql_seen_dns' is checked but not ever set.May 24 22:16:14 ubuntu-890-base snort[28880]: Warning: flowbits key 'community_uri.size.1050' is set but not ever checked.May 24 22:16:14 ubuntu-890-base snort[28880]: 37 out of 512 flowbits in use.May 24 22:16:14 ubuntu-890-base snort[28880]: OpenPcap() device eth0 network lookup: eth0: no IPv4 address assignedMay 24 22:16:14 ubuntu-890-base snort[28880]: Initializing daemon modeMay 24 22:16:14 ubuntu-890-base snort[28881]: OpenPcap() device eth0 network lookup: eth0: no IPv4 address assignedMay 24 22:16:14 ubuntu-890-base snort[28881]: PID path stat checked out ok, PID path set to /var/run/May 24 22:16:14 ubuntu-890-base snort[28881]: Writing PID "28881" to file "/var/run//snort_eth0.pid"May 24 22:16:14 ubuntu-890-base snort[28881]: Daemon initialized, signaled parent pid: 28880May 24 22:16:14 ubuntu-890-base snort[28880]: Daemon parent exitingMay 24 22:16:20 ubuntu-890-base snort[28881]: Preprocessor/Decoder Rule Count: 0May 24 22:16:20 ubuntu-890-base snort[28881]: Snort initialization completed successfully (pid=28881)May 24 22:16:20 ubuntu-890-base snort[28881]: Not Using PCAP_FRAMESMay 24 22:16:26 ubuntu-890-base approx: Version: 3.0.0May 24 22:17:27 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8May 24 22:17:35 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9May 24 22:17:44 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11May 24 22:17:55 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15May 24 22:18:10 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9May 24 22:18:19 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9May 24 22:18:28 ubuntu-890-base dhclient: No DHCPOFFERS received.May 24 22:18:28 ubuntu-890-base dhclient: No working leases in persistent database - sleeping.May 24 22:22:08 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4May 24 22:22:12 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6May 24 22:22:12 ubuntu-890-base bcfg2-server[30756]: Failed to load ssl key /etc/bcfg2.key Traceback (most recent call last): File "/usr/lib/python2.5/site-packages/Bcfg2/Component.py", line 177, in __init__ TLSServer.__init__(self, location, keyfile, CobaltXMLRPCRequestHandler) File "/usr/lib/python2.5/site-packages/Bcfg2/Component.py", line 91, in __init__ s = open(keyfile).read() IOError: [Errno 2] No such file or directory: '/etc/bcfg2.key'May 24 22:22:18 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7May 24 22:22:25 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13May 24 22:22:38 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7May 24 22:22:45 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9May 24 22:22:54 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13May 24 22:23:07 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 2May 24 22:23:09 ubuntu-890-base dhclient: No DHCPOFFERS received.May 24 22:23:09 ubuntu-890-base dhclient: No working leases in persistent database - sleeping.May 24 22:25:41 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5May 24 22:25:46 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13May 24 22:25:59 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14May 24 22:26:13 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15May 24 22:26:28 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14May 24 22:26:42 ubuntu-890-base dhclient: No DHCPOFFERS received.May 24 22:26:42 ubuntu-890-base dhclient: No working leases in persistent database - sleeping.May 24 22:30:05 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6May 24 22:30:11 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9May 24 22:30:20 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13May 24 22:30:33 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11May 24 22:30:44 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15May 24 22:30:59 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7May 24 22:31:06 ubuntu-890-base dhclient: No DHCPOFFERS received.May 24 22:31:06 ubuntu-890-base dhclient: No working leases in persistent database - sleeping.May 24 22:35:46 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7May 24 22:35:53 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20May 24 22:36:13 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15May 24 22:36:28 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14May 24 22:36:42 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5May 24 22:36:47 ubuntu-890-base dhclient: No DHCPOFFERS received.May 24 22:36:47 ubuntu-890-base dhclient: No working leases in persistent database - sleeping.May 24 22:43:26 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3May 24 22:43:29 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8May 24 22:43:37 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14May 24 22:43:51 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16May 24 22:44:07 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20May 24 22:44:27 ubuntu-890-base dhclient: No DHCPOFFERS received.May 24 22:44:27 ubuntu-890-base dhclient: No working leases in persistent database - sleeping.May 24 22:47:55 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5May 24 22:48:00 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13May 24 22:48:13 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12May 24 22:48:20 ubuntu-890-base init: rcS-sulogin main process (5129) killed by TERM signalMay 24 22:48:22 ubuntu-890-base bld[21276]: terminated by signal 15, closing all connectionsMay 24 22:48:23 ubuntu-890-base 8-_-_var_-_log_-_mail.log: 8-_-_var_-_log_-_mail.log: client (pid 28646) killed by signal 15, stoppingMay 24 22:48:23 ubuntu-890-base 9-_-_var_-_log_-_syslog: 9-_-_var_-_log_-_syslog: client (pid 28645) killed by signal 15, stoppingMay 24 22:48:23 ubuntu-890-base rpc.statd[28531]: Caught signal 15, un-registering and exiting.May 24 22:48:25 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9May 24 22:48:31 ubuntu-890-base squid[21149]: Preparing for shutdown after 0 requestsMay 24 22:48:31 ubuntu-890-base squid[21149]: Waiting 30 seconds for active connections to finishMay 24 22:48:31 ubuntu-890-base squid[21149]: FD 13 Closing HTTP connectionMay 24 22:48:31 ubuntu-890-base squid[21149]: Shutting down...May 24 22:48:31 ubuntu-890-base squid[21149]: FD 14 Closing ICP connectionMay 24 22:48:31 ubuntu-890-base squid[21149]: Closing unlinkd pipe on FD 12May 24 22:48:31 ubuntu-890-base squid[21149]: storeDirWriteCleanLogs: Starting...May 24 22:48:31 ubuntu-890-base squid[21149]: Finished. Wrote 0 entries.May 24 22:48:31 ubuntu-890-base squid[21149]: Took 0.0 seconds ( 0.0 entries/sec).May 24 22:48:31 ubuntu-890-base squid[21146]: Squid Parent: child process 21149 exited with status 0May 24 22:48:31 ubuntu-890-base squid[21149]: Squid Cache (Version 2.6.STABLE18): Exiting normally.May 24 22:48:33 ubuntu-890-base arpwatch: exitingMay 24 22:48:34 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7May 24 22:48:34 ubuntu-890-base lircd-0.8.3pre1[16820]: caught signalMay 24 22:49:37 ubuntu-890-base NetworkManager: <info> starting...May 24 22:49:38 ubuntu-890-base named[5551]: starting BIND 9.4.2-P2 -u bindMay 24 22:49:38 ubuntu-890-base named[5551]: found 2 CPUs, using 2 worker threadsMay 24 22:49:38 ubuntu-890-base named[5551]: loading configuration from '/etc/bind/named.conf'May 24 22:49:38 ubuntu-890-base named[5551]: listening on IPv6 interfaces, port 53May 24 22:49:38 ubuntu-890-base named[5551]: listening on IPv4 interface lo, 127.0.0.1#53May 24 22:49:38 ubuntu-890-base named[5551]: automatic empty zone: 254.169.IN-ADDR.ARPAMay 24 22:49:38 ubuntu-890-base named[5551]: automatic empty zone: 2.0.192.IN-ADDR.ARPAMay 24 22:49:38 ubuntu-890-base named[5551]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPAMay 24 22:49:38 ubuntu-890-base named[5551]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPAMay 24 22:49:38 ubuntu-890-base named[5551]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPAMay 24 22:49:38 ubuntu-890-base named[5551]: automatic empty zone: D.F.IP6.ARPAMay 24 22:49:38 ubuntu-890-base named[5551]: automatic empty zone: 8.E.F.IP6.ARPAMay 24 22:49:38 ubuntu-890-base named[5551]: automatic empty zone: 9.E.F.IP6.ARPAMay 24 22:49:38 ubuntu-890-base named[5551]: automatic empty zone: A.E.F.IP6.ARPAMay 24 22:49:38 ubuntu-890-base named[5551]: automatic empty zone: B.E.F.IP6.ARPAMay 24 22:49:38 ubuntu-890-base named[5551]: command channel listening on 127.0.0.1#953May 24 22:49:38 ubuntu-890-base named[5551]: command channel listening on ::1#953May 24 22:49:38 ubuntu-890-base named[5551]: zone 0.in-addr.arpa/IN: loaded serial 1May 24 22:49:38 ubuntu-890-base named[5551]: zone 127.in-addr.arpa/IN: loaded serial 1May 24 22:49:38 ubuntu-890-base named[5551]: zone 255.in-addr.arpa/IN: loaded serial 1May 24 22:49:39 ubuntu-890-base named[5551]: zone localhost/IN: loaded serial 2May 24 22:49:39 ubuntu-890-base named[5551]: runningMay 24 22:49:39 ubuntu-890-base avahi-daemon[5638]: Found user 'avahi' (UID 115) and group 'avahi' (GID 128).May 24 22:49:39 ubuntu-890-base avahi-daemon[5638]: Successfully dropped root privileges.May 24 22:49:39 ubuntu-890-base avahi-daemon[5638]: avahi-daemon 0.6.22 starting up.May 24 22:49:39 ubuntu-890-base avahi-daemon[5638]: Successfully called chroot().May 25 02:49:39 ubuntu-890-base avahi-daemon[5638]: Successfully dropped remaining capabilities.May 25 02:49:39 ubuntu-890-base avahi-daemon[5638]: No service file found in /etc/avahi/services.May 25 02:49:39 ubuntu-890-base avahi-daemon[5638]: Network interface enumeration completed.May 25 02:49:39 ubuntu-890-base avahi-daemon[5638]: Registering HINFO record with values 'X86_64'/'LINUX'.May 25 02:49:39 ubuntu-890-base avahi-daemon[5638]: Server startup complete. Host name is ubuntu-890-base.local. Local service cookie is 3978982270.May 24 22:49:40 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16May 24 22:49:40 ubuntu-890-base mysqld_safe[5730]: startedMay 24 22:49:40 ubuntu-890-base mysqld[5733]: 090524 22:49:40 InnoDB: Started; log sequence number 0 43655May 24 22:49:40 ubuntu-890-base mysqld[5733]: 090524 22:49:40 [Note] /usr/sbin/mysqld: ready for connections.May 24 22:49:40 ubuntu-890-base mysqld[5733]: Version: '5.0.51a-3ubuntu5.4' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu)May 24 22:49:41 ubuntu-890-base /etc/mysql/debian-start[5771]: Upgrading MySQL tables if necessary.May 24 22:49:41 ubuntu-890-base /etc/mysql/debian-start[5776]: Looking for 'mysql' in: /usr/bin/mysqlMay 24 22:49:41 ubuntu-890-base /etc/mysql/debian-start[5776]: Looking for 'mysqlcheck' in: /usr/bin/mysqlcheckMay 24 22:49:41 ubuntu-890-base /etc/mysql/debian-start[5776]: This installation of MySQL is already upgraded to 5.0.51a, use --force if you still need to run mysql_upgradeMay 24 22:49:41 ubuntu-890-base /etc/mysql/debian-start[5788]: Checking for insecure root accounts.May 24 22:49:41 ubuntu-890-base /etc/mysql/debian-start[5801]: Checking for crashed MySQL tables.May 24 22:49:48 ubuntu-890-base approx: Version: 3.0.0May 24 22:49:49 ubuntu-890-base bcfg2-server[5890]: Failed to load ssl key /etc/bcfg2.key Traceback (most recent call last): File "/usr/lib/python2.5/site-packages/Bcfg2/Component.py", line 177, in __init__ TLSServer.__init__(self, location, keyfile, CobaltXMLRPCRequestHandler) File "/usr/lib/python2.5/site-packages/Bcfg2/Component.py", line 91, in __init__ s = open(keyfile).read() IOError: [Errno 2] No such file or directory: '/etc/bcfg2.key'May 24 22:49:49 ubuntu-890-base bld[5896]: fopen /var/run/bld/bld.pid: No such file or directoryMay 24 22:49:52 ubuntu-890-base snort[6163]: Var 'any_ADDRESS' defined, value len = 15 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = 0.0.0.0/0.0.0.0May 24 22:49:52 ubuntu-890-base snort[6163]: Var 'lo_ADDRESS' defined, value len = 19 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = 127.0.0.0/255.0.0.0May 24 22:49:52 ubuntu-890-base snort[6163]: Parsing Rules file /etc/snort/snort.confMay 24 22:49:52 ubuntu-890-base snort[6163]: Var 'HOME_NET' redefinedMay 24 22:49:52 ubuntu-890-base snort[6163]: Var 'EXTERNAL_NET' defined, value len = 3 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = anyMay 24 22:49:52 ubuntu-890-base snort[6163]: Var 'DNS_SERVERS' defined, value len = 17 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:49:52 ubuntu-890-base snort[6163]: Var 'SMTP_SERVERS' defined, value len = 17 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:49:52 ubuntu-890-base snort[6163]: Var 'HTTP_SERVERS' defined, value len = 17 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:49:52 ubuntu-890-base snort[6163]: Var 'SQL_SERVERS' defined, value len = 17 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:49:52 ubuntu-890-base snort[6163]: Var 'TELNET_SERVERS' defined, value len = 17 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:49:52 ubuntu-890-base snort[6163]: Var 'SNMP_SERVERS' defined, value len = 17 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:49:52 ubuntu-890-base snort[6163]: Var 'HTTP_PORTS' defined, value len = 2 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = 80May 24 22:49:52 ubuntu-890-base snort[6163]: Var 'SHELLCODE_PORTS' defined, value len = 3 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = !80May 24 22:49:52 ubuntu-890-base snort[6163]: Var 'ORACLE_PORTS' defined, value len = 4 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = 1521May 24 22:49:52 ubuntu-890-base snort[6163]: Var 'AIM_SERVERS' defined, value len = 185 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: May 24 22:49:52 ubuntu-890-base snort[6163]: [64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9May 24 22:49:52 ubuntu-890-base snort[6163]: .0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24]May 24 22:49:52 ubuntu-890-base snort[6163]: Var 'RULE_PATH' defined, value len = 16 charsMay 24 22:49:52 ubuntu-890-base snort[6163]: , value = /etc/snort/rulesMay 24 22:49:52 ubuntu-890-base snort[6163]: ,-----------[Flow Config]----------------------May 24 22:49:52 ubuntu-890-base snort[6163]: | Stats Interval: 0May 24 22:49:52 ubuntu-890-base snort[6163]: | Hash Method: 2May 24 22:49:52 ubuntu-890-base snort[6163]: | Memcap: 10485760May 24 22:49:52 ubuntu-890-base snort[6163]: | Rows : 4099May 24 22:49:52 ubuntu-890-base snort[6163]: | Overhead Bytes: 32800(%0.31)May 24 22:49:52 ubuntu-890-base snort[6163]: `----------------------------------------------May 24 22:49:52 ubuntu-890-base snort[6163]: Frag3 global config:May 24 22:49:52 ubuntu-890-base snort[6163]: Max frags: 65536May 24 22:49:52 ubuntu-890-base snort[6163]: Fragment memory cap: 4194304 bytesMay 24 22:49:52 ubuntu-890-base snort[6163]: Frag3 engine config:May 24 22:49:52 ubuntu-890-base snort[6163]: Target-based policy: FIRSTMay 24 22:49:52 ubuntu-890-base snort[6163]: Fragment timeout: 60 secondsMay 24 22:49:52 ubuntu-890-base snort[6163]: Fragment min_ttl: 1May 24 22:49:52 ubuntu-890-base snort[6163]: Fragment ttl_limit: 5May 24 22:49:52 ubuntu-890-base snort[6163]: Fragment Problems: 1May 24 22:49:52 ubuntu-890-base snort[6163]: Bound Addresses: 0.0.0.0/0.0.0.0May 24 22:49:52 ubuntu-890-base snort[6163]: Stream5 global config:May 24 22:49:52 ubuntu-890-base snort[6163]: Track TCP sessions: ACTIVEMay 24 22:49:52 ubuntu-890-base snort[6163]: Max TCP sessions: 8192May 24 22:49:52 ubuntu-890-base snort[6163]: Memcap (for reassembly packet storage): 8388608May 24 22:49:52 ubuntu-890-base snort[6163]: Track UDP sessions: INACTIVEMay 24 22:49:52 ubuntu-890-base snort[6163]: Track ICMP sessions: INACTIVEMay 24 22:49:52 ubuntu-890-base snort[6163]: Stream5 TCP Policy config:May 24 22:49:52 ubuntu-890-base snort[6163]: Reassembly Policy: FIRSTMay 24 22:49:52 ubuntu-890-base snort[6163]: Timeout: 30 secondsMay 24 22:49:52 ubuntu-890-base snort[6163]: Min ttl: 1May 24 22:49:52 ubuntu-890-base snort[6163]: Options:May 24 22:49:52 ubuntu-890-base snort[6163]: Static Flushpoint Sizes: YESMay 24 22:49:52 ubuntu-890-base snort[6163]: Reassembly Ports:May 24 22:49:52 ubuntu-890-base snort[6163]: 21 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 23 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 25 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 42 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 53 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 80 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 110 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 111 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 135 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 136 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 137 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 139 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 143 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 445 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 513 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 1433 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 1521 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: 3306 client (Footprint) May 24 22:49:52 ubuntu-890-base snort[6163]: Bound Addresses:0.0.0.0/0.0.0.0May 24 22:49:52 ubuntu-890-base snort[6163]: HttpInspect Config:May 24 22:49:52 ubuntu-890-base snort[6163]: GLOBAL CONFIGMay 24 22:49:52 ubuntu-890-base snort[6163]: Max Pipeline Requests: 0May 24 22:49:52 ubuntu-890-base snort[6163]: Inspection Type: STATELESSMay 24 22:49:52 ubuntu-890-base snort[6163]: Detect Proxy Usage: NOMay 24 22:49:52 ubuntu-890-base snort[6163]: IIS Unicode Map Filename: /etc/snort/unicode.mapMay 24 22:49:52 ubuntu-890-base snort[6163]: IIS Unicode Map Codepage: 1252May 24 22:49:52 ubuntu-890-base snort[6163]: DEFAULT SERVER CONFIG:May 24 22:49:52 ubuntu-890-base snort[6163]: Server profile: AllMay 24 22:49:52 ubuntu-890-base snort[6163]: Ports: 80 8080 8180 May 24 22:49:52 ubuntu-890-base snort[6163]: Flow Depth: 300May 24 22:49:52 ubuntu-890-base snort[6163]: Max Chunk Length: 500000May 24 22:49:52 ubuntu-890-base snort[6163]: Inspect Pipeline Requests: YESMay 24 22:49:52 ubuntu-890-base snort[6163]: URI Discovery Strict Mode: NOMay 24 22:49:52 ubuntu-890-base snort[6163]: Allow Proxy Usage: NOMay 24 22:49:52 ubuntu-890-base snort[6163]: Disable Alerting: NOMay 24 22:49:52 ubuntu-890-base snort[6163]: Oversize Dir Length: 500May 24 22:49:52 ubuntu-890-base snort[6163]: Only inspect URI: NOMay 24 22:49:52 ubuntu-890-base snort[6163]: Ascii: YES alert: NOMay 24 22:49:52 ubuntu-890-base snort[6163]: Double Decoding: YES alert: YESMay 24 22:49:52 ubuntu-890-base snort[6163]: %U Encoding: YES alert: YESMay 24 22:49:52 ubuntu-890-base snort[6163]: Bare Byte: YES alert: YESMay 24 22:49:52 ubuntu-890-base snort[6163]: Base36: OFFMay 24 22:49:52 ubuntu-890-base snort[6163]: UTF 8: OFFMay 24 22:49:52 ubuntu-890-base snort[6163]: IIS Unicode: YES alert: YESMay 24 22:49:52 ubuntu-890-base snort[6163]: Multiple Slash: YES alert: NOMay 24 22:49:52 ubuntu-890-base snort[6163]: IIS Backslash: YES alert: NOMay 24 22:49:52 ubuntu-890-base snort[6163]: Directory Traversal: YES alert: NOMay 24 22:49:52 ubuntu-890-base snort[6163]: Web Root Traversal: YES alert: YESMay 24 22:49:52 ubuntu-890-base snort[6163]: Apache WhiteSpace: YES alert: NOMay 24 22:49:52 ubuntu-890-base snort[6163]: IIS Delimiter: YES alert: NOMay 24 22:49:52 ubuntu-890-base snort[6163]: IIS Unicode Map: GLOBAL IIS UNICODE MAP CONFIGMay 24 22:49:52 ubuntu-890-base snort[6163]: Non-RFC Compliant Characters: NONEMay 24 22:49:52 ubuntu-890-base snort[6163]: Whitespace Characters: 0x09 0x0b 0x0c 0x0d May 24 22:49:52 ubuntu-890-base snort[6163]: rpc_decode arguments:May 24 22:49:52 ubuntu-890-base snort[6163]: Ports to decode RPC on: 111 32771 May 24 22:49:52 ubuntu-890-base snort[6163]: alert_fragments: INACTIVEMay 24 22:49:52 ubuntu-890-base snort[6163]: alert_large_fragments: ACTIVEMay 24 22:49:52 ubuntu-890-base snort[6163]: alert_incomplete: ACTIVEMay 24 22:49:52 ubuntu-890-base snort[6163]: alert_multiple_requests: ACTIVEMay 24 22:49:52 ubuntu-890-base snort[6163]: Portscan Detection Config:May 24 22:49:52 ubuntu-890-base snort[6163]: Detect Protocols: TCP UDP ICMP IPMay 24 22:49:52 ubuntu-890-base snort[6163]: Detect Scan Type: portscan portsweep decoy_portscan distributed_portscanMay 24 22:49:52 ubuntu-890-base snort[6163]: Sensitivity Level: LowMay 24 22:49:52 ubuntu-890-base snort[6163]: Memcap (in bytes): 10000000May 24 22:49:52 ubuntu-890-base snort[6163]: Number of Nodes: 26109May 24 22:49:52 ubuntu-890-base snort[6163]: May 24 22:49:53 ubuntu-890-base snort[6163]: Tagged Packet Limit: 256May 24 22:49:53 ubuntu-890-base snort[6163]: May 24 22:49:53 ubuntu-890-base snort[6163]: +-----------------------[thresholding-config]----------------------------------May 24 22:49:53 ubuntu-890-base snort[6163]: | memory-cap : 1048576 bytesMay 24 22:49:53 ubuntu-890-base snort[6163]: +-----------------------[thresholding-global]----------------------------------May 24 22:49:53 ubuntu-890-base snort[6163]: | noneMay 24 22:49:53 ubuntu-890-base snort[6163]: +-----------------------[thresholding-local]-----------------------------------May 24 22:49:53 ubuntu-890-base snort[6163]: | noneMay 24 22:49:53 ubuntu-890-base snort[6163]: +-----------------------[suppression]------------------------------------------May 24 22:49:53 ubuntu-890-base snort[6163]: | noneMay 24 22:49:53 ubuntu-890-base snort[6163]: -------------------------------------------------------------------------------May 24 22:49:53 ubuntu-890-base snort[6163]: Rule application order: activation->dynamic->pass->drop->alert->logMay 24 22:49:53 ubuntu-890-base snort[6163]: Log directory = /var/log/snortMay 24 22:49:53 ubuntu-890-base snort[6163]: Loading dynamic engine /usr/lib/snort_dynamicengine/libsf_engine.so... May 24 22:49:53 ubuntu-890-base snort[6163]: doneMay 24 22:49:53 ubuntu-890-base snort[6163]: Loading all dynamic preprocessor libs from /usr/lib/snort_dynamicpreprocessor/...May 24 22:49:53 ubuntu-890-base snort[6163]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_ssh_preproc.so... May 24 22:49:53 ubuntu-890-base snort[6163]: doneMay 24 22:49:53 ubuntu-890-base snort[6163]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_dcerpc_preproc.so... May 24 22:49:53 ubuntu-890-base snort[6163]: doneMay 24 22:49:53 ubuntu-890-base snort[6163]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_dns_preproc.so... May 24 22:49:53 ubuntu-890-base snort[6163]: doneMay 24 22:49:53 ubuntu-890-base snort[6163]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_smtp_preproc.so... May 24 22:49:53 ubuntu-890-base snort[6163]: doneMay 24 22:49:53 ubuntu-890-base snort[6163]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_ftptelnet_preproc.so... May 24 22:49:53 ubuntu-890-base snort[6163]: doneMay 24 22:49:53 ubuntu-890-base snort[6163]: Finished Loading all dynamic preprocessor libs from /usr/lib/snort_dynamicpreprocessor/May 24 22:49:53 ubuntu-890-base snort[6163]: FTPTelnet Config:May 24 22:49:53 ubuntu-890-base snort[6163]: GLOBAL CONFIGMay 24 22:49:53 ubuntu-890-base snort[6163]: Inspection Type: statefulMay 24 22:49:53 ubuntu-890-base snort[6163]: Check for Encrypted Traffic: YES alert: YESMay 24 22:49:53 ubuntu-890-base snort[6163]: Continue to check encrypted data: NOMay 24 22:49:53 ubuntu-890-base snort[6163]: TELNET CONFIG:May 24 22:49:53 ubuntu-890-base snort[6163]: Ports: 23 May 24 22:49:53 ubuntu-890-base snort[6163]: Are You There Threshold: 200May 24 22:49:53 ubuntu-890-base snort[6163]: Normalize: YESMay 24 22:49:53 ubuntu-890-base snort[6163]: Detect Anomalies: NOMay 24 22:49:53 ubuntu-890-base snort[6163]: FTP CONFIG:May 24 22:49:53 ubuntu-890-base snort[6163]: FTP Server: defaultMay 24 22:49:53 ubuntu-890-base snort[6163]: Ports: 21 May 24 22:49:53 ubuntu-890-base snort[6163]: Check for Telnet Cmds: YES alert: YESMay 24 22:49:53 ubuntu-890-base snort[6163]: Identify open data channels: YESMay 24 22:49:53 ubuntu-890-base snort[6163]: FTP Client: defaultMay 24 22:49:53 ubuntu-890-base snort[6163]: Check for Bounce Attacks: YES alert: YESMay 24 22:49:53 ubuntu-890-base snort[6163]: Check for Telnet Cmds: YES alert: YESMay 24 22:49:53 ubuntu-890-base snort[6163]: Max Response Length: 256May 24 22:49:53 ubuntu-890-base snort[6163]: SMTP Config:May 24 22:49:53 ubuntu-890-base snort[6163]: Ports: May 24 22:49:53 ubuntu-890-base snort[6163]: 25 May 24 22:49:53 ubuntu-890-base snort[6163]: May 24 22:49:53 ubuntu-890-base snort[6163]: Inspection Type: STATEFULMay 24 22:49:53 ubuntu-890-base snort[6163]: Normalize Spaces: YESMay 24 22:49:53 ubuntu-890-base snort[6163]: Ignore Data: NOMay 24 22:49:53 ubuntu-890-base snort[6163]: Ignore TLS Data: NOMay 24 22:49:53 ubuntu-890-base snort[6163]: Ignore Alerts: NOMay 24 22:49:53 ubuntu-890-base snort[6163]: Max Command Length: 0May 24 22:49:53 ubuntu-890-base snort[6163]: Max Header Line Length: 0May 24 22:49:53 ubuntu-890-base snort[6163]: Max Response Line Length: 0May 24 22:49:53 ubuntu-890-base snort[6163]: X-Link2State Alert: YESMay 24 22:49:53 ubuntu-890-base snort[6163]: Drop on X-Link2State Alert: NOMay 24 22:49:53 ubuntu-890-base snort[6163]: DCE/RPC Decoder config:May 24 22:49:53 ubuntu-890-base snort[6163]: Autodetect ports ENABLEDMay 24 22:49:53 ubuntu-890-base snort[6163]: SMB fragmentation ENABLEDMay 24 22:49:53 ubuntu-890-base snort[6163]: DCE/RPC fragmentation ENABLEDMay 24 22:49:53 ubuntu-890-base snort[6163]: Max Frag Size: 3000 bytesMay 24 22:49:53 ubuntu-890-base snort[6163]: Memcap: 100000 KBMay 24 22:49:53 ubuntu-890-base snort[6163]: Alert if memcap exceeded DISABLEDMay 24 22:49:53 ubuntu-890-base snort[6163]: May 24 22:49:53 ubuntu-890-base snort[6163]: DNS config: May 24 22:49:53 ubuntu-890-base snort[6163]: DNS Client rdata txt Overflow Alert: ACTIVEMay 24 22:49:53 ubuntu-890-base snort[6163]: Obsolete DNS RR Types Alert: INACTIVEMay 24 22:49:53 ubuntu-890-base snort[6163]: Experimental DNS RR Types Alert: INACTIVEMay 24 22:49:53 ubuntu-890-base snort[6163]: Ports:May 24 22:49:53 ubuntu-890-base snort[6163]: 53May 24 22:49:53 ubuntu-890-base snort[6163]: May 24 22:49:53 ubuntu-890-base snort[6163]: Warning: flowbits key 'community_uri.size.1050' is set but not ever checked.May 24 22:49:53 ubuntu-890-base snort[6163]: Warning: flowbits key 'realplayer.playlist' is checked but not ever set.May 24 22:49:53 ubuntu-890-base snort[6163]: Warning: flowbits key 'ms_sql_seen_dns' is checked but not ever set.May 24 22:49:53 ubuntu-890-base snort[6163]: Warning: flowbits key 'smb.tree.create.llsrpc' is set but not ever checked.May 24 22:49:53 ubuntu-890-base snort[6163]: 37 out of 512 flowbits in use.May 24 22:49:53 ubuntu-890-base snort[6163]: OpenPcap() device eth0 network lookup: eth0: no IPv4 address assignedMay 24 22:49:53 ubuntu-890-base snort[6163]: Initializing daemon modeMay 24 22:49:53 ubuntu-890-base snort[6165]: OpenPcap() device eth0 network lookup: eth0: no IPv4 address assignedMay 24 22:49:53 ubuntu-890-base snort[6165]: PID path stat checked out ok, PID path set to /var/run/May 24 22:49:53 ubuntu-890-base snort[6165]: Writing PID "6165" to file "/var/run//snort_eth0.pid"May 24 22:49:53 ubuntu-890-base snort[6165]: Daemon initialized, signaled parent pid: 6163May 24 22:49:53 ubuntu-890-base snort[6163]: Daemon parent exitingMay 24 22:49:55 ubuntu-890-base NetworkManager: <info> eth1: Device is fully-supported using driver 'forcedeth'.May 24 22:49:55 ubuntu-890-base NetworkManager: <info> nm_device_init(): waiting for device's worker thread to startMay 24 22:49:55 ubuntu-890-base NetworkManager: <info> nm_device_init(): device's worker thread started, continuing.May 24 22:49:55 ubuntu-890-base NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth1'.May 24 22:49:55 ubuntu-890-base NetworkManager: <info> Deactivating device eth1.May 24 22:49:55 ubuntu-890-base NetworkManager: <info> eth2: Device is fully-supported using driver '3c59x'.May 24 22:49:55 ubuntu-890-base NetworkManager: <info> nm_device_init(): waiting for device's worker thread to startMay 24 22:49:55 ubuntu-890-base NetworkManager: <info> nm_device_init(): device's worker thread started, continuing.May 24 22:49:55 ubuntu-890-base NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth2'.May 24 22:49:55 ubuntu-890-base NetworkManager: <info> Deactivating device eth2.May 24 22:49:55 ubuntu-890-base NetworkManager: <info> Will activate wired connection 'eth2' because it now has a link.May 24 22:49:55 ubuntu-890-base NetworkManager: <debug> [1243219795.293603] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_model_LTR_52327S').May 24 22:49:55 ubuntu-890-base NetworkManager: <info> SWITCH: no current connection, found better connection 'eth2'.May 24 22:49:55 ubuntu-890-base hcid[6449]: Bluetooth HCI daemonMay 24 22:49:55 ubuntu-890-base hcid[6449]: Starting SDP serverMay 24 22:49:55 ubuntu-890-base hcid[6449]: Created local server at unix:abstract=/var/run/dbus-Fqg1QVTJvG,guid=977202bddc2b03ed74ac7ad04a1a0753May 24 22:49:55 ubuntu-890-base input[6487]: Bluetooth Input daemonMay 24 22:49:55 ubuntu-890-base input[6487]: Registered input manager path:/org/bluez/inputMay 24 22:49:55 ubuntu-890-base audio[6494]: Bluetooth Audio daemonMay 24 22:49:55 ubuntu-890-base audio[6494]: Unix socket created: 5May 24 22:49:55 ubuntu-890-base audio[6494]: audio.conf: Key file does not have key 'Enable'May 24 22:49:55 ubuntu-890-base audio[6494]: audio.conf: Key file does not have key 'Disable'May 24 22:49:55 ubuntu-890-base audio[6494]: add_service_record: got record id 0x10000May 24 22:49:55 ubuntu-890-base audio[6494]: audio.conf: Key file does not have key 'Disable'May 24 22:49:55 ubuntu-890-base audio[6494]: audio.conf: Key file does not have group 'A2DP'May 24 22:49:55 ubuntu-890-base audio[6494]: audio.conf: Key file does not have group 'A2DP'May 24 22:49:55 ubuntu-890-base audio[6494]: audio.conf: Key file does not have group 'A2DP'May 24 22:49:55 ubuntu-890-base audio[6494]: audio.conf: Key file does not have group 'A2DP'May 24 22:49:55 ubuntu-890-base audio[6494]: SEP 0x62d390 registered: type:0 codec:0 seid:1May 24 22:49:55 ubuntu-890-base audio[6494]: add_service_record: got record id 0x10001May 24 22:49:55 ubuntu-890-base audio[6494]: add_service_record: got record id 0x10002May 24 22:49:55 ubuntu-890-base audio[6494]: add_service_record: got record id 0x10003May 24 22:49:55 ubuntu-890-base audio[6494]: Registered manager path:/org/bluez/audioMay 24 22:49:55 ubuntu-890-base hal_lpadmin: addMay 24 22:49:55 ubuntu-890-base hal_lpadmin: URIs: ['usb://Lexmark/%206500%20Series', 'hal:///org/freedesktop/Hal/devices/usb_device_43d_10f_16Y068531148173_if1_printer_noserial']May 24 22:49:55 ubuntu-890-base hal_lpadmin: HPLIP Fax URIs: NoneMay 24 22:49:55 ubuntu-890-base hal_lpadmin: Not adding printer: _6500_Series already existsMay 24 22:49:56 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Will activate connection 'eth2'.May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Device eth2 activation scheduled...May 24 22:49:56 ubuntu-890-base NetworkManager: <debug> [1243219796.293880] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth').May 24 22:49:56 ubuntu-890-base NetworkManager: <debug> [1243219796.295517] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_43d_10f_16Y068531148173_if1_printer_noserial').May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) started...May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 1 of 5 (Device Prepare) scheduled...May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 1 of 5 (Device Prepare) started...May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) scheduled...May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 1 of 5 (Device Prepare) complete.May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) starting...May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) successful.May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 3 of 5 (IP Configure Start) scheduled.May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) complete.May 24 22:49:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 3 of 5 (IP Configure Start) started...May 24 22:49:57 ubuntu-890-base NetworkManager: <info> Activation (eth2) Beginning DHCP transaction.May 24 22:49:57 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 3 of 5 (IP Configure Start) complete.May 24 22:49:57 ubuntu-890-base NetworkManager: <info> DHCP daemon state is now 12 (successfully started) for interface eth2May 24 22:49:57 ubuntu-890-base squid[6594]: Squid Parent: child process 6596 startedMay 24 22:49:57 ubuntu-890-base squid[6596]: Starting Squid Cache version 2.6.STABLE18 for amd64-debian-linux-gnu...May 24 22:49:57 ubuntu-890-base squid[6596]: Process ID 6596May 24 22:49:57 ubuntu-890-base squid[6596]: With 1024 file descriptors availableMay 24 22:49:57 ubuntu-890-base squid[6596]: Using epoll for the IO loopMay 24 22:49:57 ubuntu-890-base squid[6596]: DNS Socket created at 0.0.0.0, port 50745, FD 6May 24 22:49:57 ubuntu-890-base squid[6596]: Adding domain Belkin from /etc/resolv.confMay 24 22:49:57 ubuntu-890-base squid[6596]: Adding nameserver 192.168.2.1 from /etc/resolv.confMay 24 22:49:57 ubuntu-890-base squid[6596]: User-Agent logging is disabled.May 24 22:49:57 ubuntu-890-base squid[6596]: Referer logging is disabled.May 24 22:49:58 ubuntu-890-base squid[6596]: Unlinkd pipe opened on FD 11May 24 22:49:58 ubuntu-890-base squid[6596]: Swap maxSize 102400 KB, estimated 7876 objectsMay 24 22:49:58 ubuntu-890-base squid[6596]: Target number of buckets: 393May 24 22:49:58 ubuntu-890-base squid[6596]: Using 8192 Store bucketsMay 24 22:49:58 ubuntu-890-base squid[6596]: Max Mem size: 8192 KBMay 24 22:49:58 ubuntu-890-base squid[6596]: Max Swap size: 102400 KBMay 24 22:49:58 ubuntu-890-base squid[6596]: Local cache digest enabled; rebuild/rewrite every 3600/3600 secMay 24 22:49:58 ubuntu-890-base squid[6596]: Rebuilding storage in /var/spool/squid (CLEAN)May 24 22:49:58 ubuntu-890-base squid[6596]: Using Least Load store dir selectionMay 24 22:49:58 ubuntu-890-base squid[6596]: Set Current Directory to /var/spool/squidMay 24 22:49:58 ubuntu-890-base arpwatch: Running as uid=124 gid=138May 24 22:49:58 ubuntu-890-base arpwatch: listening on eth0May 24 22:49:58 ubuntu-890-base NetworkManager: <info> DHCP daemon state is now 1 (starting) for interface eth2May 24 22:49:58 ubuntu-890-base squid[6596]: Loaded Icons.May 24 22:49:58 ubuntu-890-base squid[6596]: Accepting proxy HTTP connections at 0.0.0.0, port 3128, FD 13.May 24 22:49:58 ubuntu-890-base squid[6596]: Accepting ICP messages at 0.0.0.0, port 3130, FD 14.May 24 22:49:58 ubuntu-890-base squid[6596]: HTCP Disabled.May 24 22:49:58 ubuntu-890-base squid[6596]: WCCP Disabled.May 24 22:49:58 ubuntu-890-base squid[6596]: Ready to serve requests.May 24 22:49:58 ubuntu-890-base squid[6596]: Done reading /var/spool/squid swaplog (0 entries)May 24 22:49:58 ubuntu-890-base squid[6596]: Finished rebuilding storage from disk.May 24 22:49:58 ubuntu-890-base squid[6596]: 0 Entries scannedMay 24 22:49:58 ubuntu-890-base squid[6596]: 0 Invalid entries.May 24 22:49:58 ubuntu-890-base squid[6596]: 0 With invalid flags.May 24 22:49:58 ubuntu-890-base squid[6596]: 0 Objects loaded.May 24 22:49:58 ubuntu-890-base squid[6596]: 0 Objects expired.May 24 22:49:58 ubuntu-890-base squid[6596]: 0 Objects cancelled.May 24 22:49:58 ubuntu-890-base squid[6596]: 0 Duplicate URLs purged.May 24 22:49:58 ubuntu-890-base squid[6596]: 0 Swapfile clashes avoided.May 24 22:49:58 ubuntu-890-base squid[6596]: Took 0.6 seconds ( 0.0 objects/sec).May 24 22:49:58 ubuntu-890-base squid[6596]: Beginning Validation ProcedureMay 24 22:49:58 ubuntu-890-base squid[6596]: Completed Validation ProcedureMay 24 22:49:58 ubuntu-890-base squid[6596]: Validated 0 EntriesMay 24 22:49:58 ubuntu-890-base squid[6596]: store_swap_size = 0kMay 24 22:49:58 ubuntu-890-base lircd-0.8.3pre1[6646]: garbage after 'name' token in line 335 ignoredMay 24 22:49:58 ubuntu-890-base lircd-0.8.3pre1[6647]: lircd(userspace) readyMay 24 22:49:58 ubuntu-890-base squid[6596]: storeLateRelease: released 0 objectsMay 24 22:49:59 ubuntu-890-base snort[6165]: Preprocessor/Decoder Rule Count: 0May 24 22:49:59 ubuntu-890-base snort[6165]: Snort initialization completed successfully (pid=6165)May 24 22:49:59 ubuntu-890-base snort[6165]: Not Using PCAP_FRAMESMay 24 22:50:00 ubuntu-890-base dhclient: DHCPREQUEST of 192.168.2.3 on eth2 to 255.255.255.255 port 67May 24 22:50:00 ubuntu-890-base dhclient: DHCPACK of 192.168.2.3 from 192.168.2.1May 25 02:50:00 ubuntu-890-base avahi-daemon[5638]: Joining mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 25 02:50:00 ubuntu-890-base avahi-daemon[5638]: New relevant interface eth2.IPv4 for mDNS.May 25 02:50:00 ubuntu-890-base avahi-daemon[5638]: Registering new address record for 192.168.2.3 on eth2.IPv4.May 24 22:50:00 ubuntu-890-base NetworkManager: <info> DHCP daemon state is now 4 (reboot) for interface eth2May 24 22:50:00 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 4 of 5 (IP Configure Get) scheduled...May 24 22:50:00 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 4 of 5 (IP Configure Get) started...May 24 22:50:00 ubuntu-890-base dhclient: bound to 192.168.2.3 -- renewal in 2147483648 seconds.May 24 22:50:01 ubuntu-890-base NetworkManager: <info> Retrieved the following IP4 configuration from the DHCP daemon:May 24 22:50:01 ubuntu-890-base NetworkManager: <info> address 192.168.2.3May 24 22:50:01 ubuntu-890-base NetworkManager: <info> netmask 255.255.255.0May 24 22:50:01 ubuntu-890-base NetworkManager: <info> broadcast 192.168.2.255May 24 22:50:01 ubuntu-890-base NetworkManager: <info> gateway 192.168.2.1May 24 22:50:01 ubuntu-890-base NetworkManager: <info> nameserver 192.168.2.1May 24 22:50:01 ubuntu-890-base NetworkManager: <info> domain name 'Belkin'May 24 22:50:01 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 5 of 5 (IP Configure Commit) scheduled...May 24 22:50:01 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 4 of 5 (IP Configure Get) complete.May 24 22:50:01 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 5 of 5 (IP Configure Commit) started...May 25 02:50:01 ubuntu-890-base avahi-daemon[5638]: Withdrawing address record for 192.168.2.3 on eth2.May 25 02:50:01 ubuntu-890-base avahi-daemon[5638]: Leaving mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 25 02:50:01 ubuntu-890-base avahi-daemon[5638]: Interface eth2.IPv4 no longer relevant for mDNS.May 25 02:50:01 ubuntu-890-base avahi-daemon[5638]: Joining mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 25 02:50:01 ubuntu-890-base avahi-daemon[5638]: New relevant interface eth2.IPv4 for mDNS.May 25 02:50:01 ubuntu-890-base avahi-daemon[5638]: Registering new address record for 192.168.2.3 on eth2.IPv4.May 24 22:50:02 ubuntu-890-base NetworkManager: <info> Clearing nscd hosts cache.May 24 22:50:02 ubuntu-890-base NetworkManager: <WARN> nm_spawn_process(): nm_spawn_process('/usr/sbin/nscd -i hosts'): could not spawn process. (Failed to execute child process "/usr/sbin/nscd" (No such file or directory))May 24 22:50:02 ubuntu-890-base NetworkManager: <info> Activation (eth2) successful, device activated.May 24 22:50:02 ubuntu-890-base NetworkManager: <info> Activation (eth2) Finish handler scheduled.May 24 22:50:02 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 5 of 5 (IP Configure Commit) complete.May 24 22:50:03 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11May 24 22:50:02 ubuntu-890-base ntpdate[7019]: step time server 91.189.94.4 offset -0.593163 secMay 25 02:50:03 ubuntu-890-base avahi-daemon[5638]: Registering new address record for fe80::204:76ff:feec:c7d6 on eth2.*.May 24 22:50:14 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13May 24 22:50:15 ubuntu-890-base init: tty4 main process (5202) killed by TERM signalMay 24 22:50:15 ubuntu-890-base init: tty5 main process (5203) killed by TERM signalMay 24 22:50:15 ubuntu-890-base init: tty2 main process (5205) killed by TERM signalMay 24 22:50:15 ubuntu-890-base init: tty3 main process (5207) killed by TERM signalMay 24 22:50:15 ubuntu-890-base init: tty6 main process (5209) killed by TERM signalMay 24 22:50:15 ubuntu-890-base init: tty1 main process (7049) killed by TERM signalMay 24 22:50:16 ubuntu-890-base gdm[7171]: CRITICAL: gdm_connection_close: assertion `conn != NULL' failedMay 24 22:50:16 ubuntu-890-base gdm[7171]: CRITICAL: gdm_connection_close: assertion `conn != NULL' failedMay 24 22:50:16 ubuntu-890-base gdm[7171]: CRITICAL: gdm_connection_close: assertion `conn != NULL' failedMay 24 22:50:16 ubuntu-890-base gdm[7171]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:50:16 ubuntu-890-base gdm[7171]: WARNING: Request for invalid configuration key xdmcp/PingIntervalSeconds=15May 24 22:50:16 ubuntu-890-base gdm[7171]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:50:16 ubuntu-890-base gdm[7171]: WARNING: Request for invalid configuration key xdmcp/PingIntervalSeconds=15May 24 22:50:17 ubuntu-890-base gdm[7171]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:50:17 ubuntu-890-base gdm[7171]: WARNING: Request for invalid configuration key daemon/ServAuthDir=/var/lib/gdmMay 24 22:50:17 ubuntu-890-base gdm[7171]: WARNING: gdm_slave_send: Can't open fifo!May 24 22:50:17 ubuntu-890-base gdm[7171]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:50:17 ubuntu-890-base gdm[7171]: WARNING: Request for invalid configuration key daemon/ServAuthDir=/var/lib/gdmMay 24 22:50:17 ubuntu-890-base gdm[7171]: WARNING: gdm_auth_secure_display: Cannot safely open May 24 22:50:17 ubuntu-890-base gdm[7171]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:50:17 ubuntu-890-base gdm[7171]: WARNING: Request for invalid configuration key daemon/ConsoleCannotHandle=am,ar,az,bn,el,fa,gu,hi,ja,ko,ml,mr,pa,ta,zhMay 24 22:50:17 ubuntu-890-base gdm[7171]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:50:17 ubuntu-890-base gdm[7171]: WARNING: Request for invalid configuration key daemon/ConsoleNotify=trueMay 25 02:50:17 ubuntu-890-base avahi-daemon[5638]: Got SIGTERM, quitting.May 25 02:50:17 ubuntu-890-base avahi-daemon[5638]: Leaving mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 24 22:50:17 ubuntu-890-base 9-_-_var_-_log_-_syslog: 9-_-_var_-_log_-_syslog: client (pid 5951) killed by signal 15, stoppingMay 24 22:50:17 ubuntu-890-base 8-_-_var_-_log_-_mail.log: 8-_-_var_-_log_-_mail.log: client (pid 5950) killed by signal 15, stoppingMay 24 22:50:17 ubuntu-890-base rpc.statd[5030]: Caught signal 15, un-registering and exiting.May 24 22:50:23 ubuntu-890-base mysqld[5733]: 090524 22:50:23 [Note] /usr/sbin/mysqld: Normal shutdownMay 24 22:50:23 ubuntu-890-base mysqld[5733]: May 24 22:50:23 ubuntu-890-base mysqld[5733]: 090524 22:50:23 InnoDB: Starting shutdown...May 24 22:50:24 ubuntu-890-base mysqld[5733]: 090524 22:50:24 InnoDB: Shutdown completed; log sequence number 0 43655May 24 22:50:24 ubuntu-890-base mysqld[5733]: 090524 22:50:24 [Note] /usr/sbin/mysqld: Shutdown completeMay 24 22:50:24 ubuntu-890-base mysqld[5733]: May 24 22:50:24 ubuntu-890-base mysqld_safe[7635]: endedMay 24 22:50:27 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6May 24 22:50:27 ubuntu-890-base squid[6596]: Preparing for shutdown after 0 requestsMay 24 22:50:27 ubuntu-890-base squid[6596]: Waiting 30 seconds for active connections to finishMay 24 22:50:27 ubuntu-890-base squid[6596]: FD 13 Closing HTTP connectionMay 24 22:50:27 ubuntu-890-base squid[6596]: Shutting down...May 24 22:50:27 ubuntu-890-base squid[6596]: FD 14 Closing ICP connectionMay 24 22:50:27 ubuntu-890-base squid[6596]: Closing unlinkd pipe on FD 11May 24 22:50:27 ubuntu-890-base squid[6596]: storeDirWriteCleanLogs: Starting...May 24 22:50:27 ubuntu-890-base squid[6596]: Finished. Wrote 0 entries.May 24 22:50:27 ubuntu-890-base squid[6596]: Took 0.0 seconds ( 0.0 entries/sec).May 24 22:50:27 ubuntu-890-base squid[6596]: Squid Cache (Version 2.6.STABLE18): Exiting normally.May 24 22:50:27 ubuntu-890-base squid[6594]: Squid Parent: child process 6596 exited with status 0May 24 22:50:29 ubuntu-890-base arpwatch: exitingMay 24 22:50:30 ubuntu-890-base lircd-0.8.3pre1[6647]: caught signalMay 24 22:50:30 ubuntu-890-base named[5551]: shutting down: flushing changesMay 24 22:50:30 ubuntu-890-base named[5551]: stopping command channel on 127.0.0.1#953May 24 22:50:30 ubuntu-890-base named[5551]: stopping command channel on ::1#953May 24 22:50:30 ubuntu-890-base named[5551]: no longer listening on ::#53May 24 22:50:30 ubuntu-890-base named[5551]: no longer listening on 127.0.0.1#53May 24 22:50:30 ubuntu-890-base named[5551]: exitingMay 24 22:51:34 ubuntu-890-base NetworkManager: <info> starting...May 24 22:51:35 ubuntu-890-base named[5551]: starting BIND 9.4.2-P2 -u bindMay 24 22:51:35 ubuntu-890-base named[5551]: found 2 CPUs, using 2 worker threadsMay 24 22:51:35 ubuntu-890-base named[5551]: loading configuration from '/etc/bind/named.conf'May 24 22:51:35 ubuntu-890-base named[5551]: listening on IPv6 interfaces, port 53May 24 22:51:35 ubuntu-890-base named[5551]: listening on IPv4 interface lo, 127.0.0.1#53May 24 22:51:35 ubuntu-890-base named[5551]: automatic empty zone: 254.169.IN-ADDR.ARPAMay 24 22:51:35 ubuntu-890-base named[5551]: automatic empty zone: 2.0.192.IN-ADDR.ARPAMay 24 22:51:35 ubuntu-890-base named[5551]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPAMay 24 22:51:35 ubuntu-890-base named[5551]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPAMay 24 22:51:35 ubuntu-890-base named[5551]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPAMay 24 22:51:35 ubuntu-890-base named[5551]: automatic empty zone: D.F.IP6.ARPAMay 24 22:51:35 ubuntu-890-base named[5551]: automatic empty zone: 8.E.F.IP6.ARPAMay 24 22:51:35 ubuntu-890-base named[5551]: automatic empty zone: 9.E.F.IP6.ARPAMay 24 22:51:35 ubuntu-890-base named[5551]: automatic empty zone: A.E.F.IP6.ARPAMay 24 22:51:35 ubuntu-890-base named[5551]: automatic empty zone: B.E.F.IP6.ARPAMay 24 22:51:35 ubuntu-890-base named[5551]: command channel listening on 127.0.0.1#953May 24 22:51:35 ubuntu-890-base named[5551]: command channel listening on ::1#953May 24 22:51:35 ubuntu-890-base named[5551]: zone 0.in-addr.arpa/IN: loaded serial 1May 24 22:51:35 ubuntu-890-base named[5551]: zone 127.in-addr.arpa/IN: loaded serial 1May 24 22:51:35 ubuntu-890-base named[5551]: zone 255.in-addr.arpa/IN: loaded serial 1May 24 22:51:35 ubuntu-890-base named[5551]: zone localhost/IN: loaded serial 2May 24 22:51:35 ubuntu-890-base named[5551]: runningMay 24 22:51:36 ubuntu-890-base avahi-daemon[5638]: Found user 'avahi' (UID 115) and group 'avahi' (GID 128).May 24 22:51:36 ubuntu-890-base avahi-daemon[5638]: Successfully dropped root privileges.May 24 22:51:36 ubuntu-890-base avahi-daemon[5638]: avahi-daemon 0.6.22 starting up.May 24 22:51:36 ubuntu-890-base avahi-daemon[5638]: Successfully called chroot().May 25 02:51:36 ubuntu-890-base avahi-daemon[5638]: Successfully dropped remaining capabilities.May 25 02:51:36 ubuntu-890-base avahi-daemon[5638]: No service file found in /etc/avahi/services.May 25 02:51:36 ubuntu-890-base avahi-daemon[5638]: Network interface enumeration completed.May 25 02:51:36 ubuntu-890-base avahi-daemon[5638]: Registering HINFO record with values 'X86_64'/'LINUX'.May 25 02:51:36 ubuntu-890-base avahi-daemon[5638]: Server startup complete. Host name is ubuntu-890-base.local. Local service cookie is 712251040.May 24 22:51:37 ubuntu-890-base mysqld_safe[5730]: startedMay 24 22:51:37 ubuntu-890-base mysqld[5733]: 090524 22:51:37 InnoDB: Started; log sequence number 0 43655May 24 22:51:37 ubuntu-890-base mysqld[5733]: 090524 22:51:37 [Note] /usr/sbin/mysqld: ready for connections.May 24 22:51:37 ubuntu-890-base mysqld[5733]: Version: '5.0.51a-3ubuntu5.4' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu)May 24 22:51:38 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13May 24 22:51:38 ubuntu-890-base /etc/mysql/debian-start[5771]: Upgrading MySQL tables if necessary.May 24 22:51:38 ubuntu-890-base /etc/mysql/debian-start[5776]: Looking for 'mysql' in: /usr/bin/mysqlMay 24 22:51:38 ubuntu-890-base /etc/mysql/debian-start[5776]: Looking for 'mysqlcheck' in: /usr/bin/mysqlcheckMay 24 22:51:38 ubuntu-890-base /etc/mysql/debian-start[5776]: This installation of MySQL is already upgraded to 5.0.51a, use --force if you still need to run mysql_upgradeMay 24 22:51:38 ubuntu-890-base /etc/mysql/debian-start[5788]: Checking for insecure root accounts.May 24 22:51:38 ubuntu-890-base /etc/mysql/debian-start[5801]: Checking for crashed MySQL tables.May 24 22:51:45 ubuntu-890-base approx: Version: 3.0.0May 24 22:51:46 ubuntu-890-base bcfg2-server[5890]: Failed to load ssl key /etc/bcfg2.key Traceback (most recent call last): File "/usr/lib/python2.5/site-packages/Bcfg2/Component.py", line 177, in __init__ TLSServer.__init__(self, location, keyfile, CobaltXMLRPCRequestHandler) File "/usr/lib/python2.5/site-packages/Bcfg2/Component.py", line 91, in __init__ s = open(keyfile).read() IOError: [Errno 2] No such file or directory: '/etc/bcfg2.key'May 24 22:51:46 ubuntu-890-base bld[5896]: fopen /var/run/bld/bld.pid: No such file or directoryMay 24 22:51:49 ubuntu-890-base snort[6163]: Var 'any_ADDRESS' defined, value len = 15 charsMay 24 22:51:49 ubuntu-890-base snort[6163]: , value = 0.0.0.0/0.0.0.0May 24 22:51:49 ubuntu-890-base snort[6163]: Var 'lo_ADDRESS' defined, value len = 19 charsMay 24 22:51:49 ubuntu-890-base snort[6163]: , value = 127.0.0.0/255.0.0.0May 24 22:51:49 ubuntu-890-base snort[6163]: Parsing Rules file /etc/snort/snort.confMay 24 22:51:50 ubuntu-890-base snort[6163]: Var 'HOME_NET' redefinedMay 24 22:51:50 ubuntu-890-base snort[6163]: Var 'EXTERNAL_NET' defined, value len = 3 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: , value = anyMay 24 22:51:50 ubuntu-890-base snort[6163]: Var 'DNS_SERVERS' defined, value len = 17 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:51:50 ubuntu-890-base snort[6163]: Var 'SMTP_SERVERS' defined, value len = 17 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:51:50 ubuntu-890-base snort[6163]: Var 'HTTP_SERVERS' defined, value len = 17 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:51:50 ubuntu-890-base snort[6163]: Var 'SQL_SERVERS' defined, value len = 17 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:51:50 ubuntu-890-base snort[6163]: Var 'TELNET_SERVERS' defined, value len = 17 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:51:50 ubuntu-890-base snort[6163]: Var 'SNMP_SERVERS' defined, value len = 17 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: , value = [192.168.2.0/109]May 24 22:51:50 ubuntu-890-base snort[6163]: Var 'HTTP_PORTS' defined, value len = 2 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: , value = 80May 24 22:51:50 ubuntu-890-base snort[6163]: Var 'SHELLCODE_PORTS' defined, value len = 3 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: , value = !80May 24 22:51:50 ubuntu-890-base snort[6163]: Var 'ORACLE_PORTS' defined, value len = 4 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: , value = 1521May 24 22:51:50 ubuntu-890-base snort[6163]: Var 'AIM_SERVERS' defined, value len = 185 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: May 24 22:51:50 ubuntu-890-base snort[6163]: [64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9May 24 22:51:50 ubuntu-890-base snort[6163]: .0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24]May 24 22:51:50 ubuntu-890-base snort[6163]: Var 'RULE_PATH' defined, value len = 16 charsMay 24 22:51:50 ubuntu-890-base snort[6163]: , value = /etc/snort/rulesMay 24 22:51:50 ubuntu-890-base snort[6163]: ,-----------[Flow Config]----------------------May 24 22:51:50 ubuntu-890-base snort[6163]: | Stats Interval: 0May 24 22:51:50 ubuntu-890-base snort[6163]: | Hash Method: 2May 24 22:51:50 ubuntu-890-base snort[6163]: | Memcap: 10485760May 24 22:51:50 ubuntu-890-base snort[6163]: | Rows : 4099May 24 22:51:50 ubuntu-890-base snort[6163]: | Overhead Bytes: 32800(%0.31)May 24 22:51:50 ubuntu-890-base snort[6163]: `----------------------------------------------May 24 22:51:50 ubuntu-890-base snort[6163]: Frag3 global config:May 24 22:51:50 ubuntu-890-base snort[6163]: Max frags: 65536May 24 22:51:50 ubuntu-890-base snort[6163]: Fragment memory cap: 4194304 bytesMay 24 22:51:50 ubuntu-890-base snort[6163]: Frag3 engine config:May 24 22:51:50 ubuntu-890-base snort[6163]: Target-based policy: FIRSTMay 24 22:51:50 ubuntu-890-base snort[6163]: Fragment timeout: 60 secondsMay 24 22:51:50 ubuntu-890-base snort[6163]: Fragment min_ttl: 1May 24 22:51:50 ubuntu-890-base snort[6163]: Fragment ttl_limit: 5May 24 22:51:50 ubuntu-890-base snort[6163]: Fragment Problems: 1May 24 22:51:50 ubuntu-890-base snort[6163]: Bound Addresses: 0.0.0.0/0.0.0.0May 24 22:51:50 ubuntu-890-base snort[6163]: Stream5 global config:May 24 22:51:50 ubuntu-890-base snort[6163]: Track TCP sessions: ACTIVEMay 24 22:51:50 ubuntu-890-base snort[6163]: Max TCP sessions: 8192May 24 22:51:50 ubuntu-890-base snort[6163]: Memcap (for reassembly packet storage): 8388608May 24 22:51:50 ubuntu-890-base snort[6163]: Track UDP sessions: INACTIVEMay 24 22:51:50 ubuntu-890-base snort[6163]: Track ICMP sessions: INACTIVEMay 24 22:51:50 ubuntu-890-base snort[6163]: Stream5 TCP Policy config:May 24 22:51:50 ubuntu-890-base snort[6163]: Reassembly Policy: FIRSTMay 24 22:51:50 ubuntu-890-base snort[6163]: Timeout: 30 secondsMay 24 22:51:50 ubuntu-890-base snort[6163]: Min ttl: 1May 24 22:51:50 ubuntu-890-base snort[6163]: Options:May 24 22:51:50 ubuntu-890-base snort[6163]: Static Flushpoint Sizes: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Reassembly Ports:May 24 22:51:50 ubuntu-890-base snort[6163]: 21 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 23 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 25 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 42 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 53 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 80 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 110 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 111 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 135 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 136 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 137 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 139 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 143 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 445 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 513 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 1433 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 1521 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: 3306 client (Footprint) May 24 22:51:50 ubuntu-890-base snort[6163]: Bound Addresses:0.0.0.0/0.0.0.0May 24 22:51:50 ubuntu-890-base snort[6163]: HttpInspect Config:May 24 22:51:50 ubuntu-890-base snort[6163]: GLOBAL CONFIGMay 24 22:51:50 ubuntu-890-base snort[6163]: Max Pipeline Requests: 0May 24 22:51:50 ubuntu-890-base snort[6163]: Inspection Type: STATELESSMay 24 22:51:50 ubuntu-890-base snort[6163]: Detect Proxy Usage: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: IIS Unicode Map Filename: /etc/snort/unicode.mapMay 24 22:51:50 ubuntu-890-base snort[6163]: IIS Unicode Map Codepage: 1252May 24 22:51:50 ubuntu-890-base snort[6163]: DEFAULT SERVER CONFIG:May 24 22:51:50 ubuntu-890-base snort[6163]: Server profile: AllMay 24 22:51:50 ubuntu-890-base snort[6163]: Ports: 80 8080 8180 May 24 22:51:50 ubuntu-890-base snort[6163]: Flow Depth: 300May 24 22:51:50 ubuntu-890-base snort[6163]: Max Chunk Length: 500000May 24 22:51:50 ubuntu-890-base snort[6163]: Inspect Pipeline Requests: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: URI Discovery Strict Mode: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: Allow Proxy Usage: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: Disable Alerting: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: Oversize Dir Length: 500May 24 22:51:50 ubuntu-890-base snort[6163]: Only inspect URI: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: Ascii: YES alert: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: Double Decoding: YES alert: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: %U Encoding: YES alert: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Bare Byte: YES alert: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Base36: OFFMay 24 22:51:50 ubuntu-890-base snort[6163]: UTF 8: OFFMay 24 22:51:50 ubuntu-890-base snort[6163]: IIS Unicode: YES alert: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Multiple Slash: YES alert: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: IIS Backslash: YES alert: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: Directory Traversal: YES alert: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: Web Root Traversal: YES alert: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Apache WhiteSpace: YES alert: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: IIS Delimiter: YES alert: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: IIS Unicode Map: GLOBAL IIS UNICODE MAP CONFIGMay 24 22:51:50 ubuntu-890-base snort[6163]: Non-RFC Compliant Characters: NONEMay 24 22:51:50 ubuntu-890-base snort[6163]: Whitespace Characters: 0x09 0x0b 0x0c 0x0d May 24 22:51:50 ubuntu-890-base snort[6163]: rpc_decode arguments:May 24 22:51:50 ubuntu-890-base snort[6163]: Ports to decode RPC on: 111 32771 May 24 22:51:50 ubuntu-890-base snort[6163]: alert_fragments: INACTIVEMay 24 22:51:50 ubuntu-890-base snort[6163]: alert_large_fragments: ACTIVEMay 24 22:51:50 ubuntu-890-base snort[6163]: alert_incomplete: ACTIVEMay 24 22:51:50 ubuntu-890-base snort[6163]: alert_multiple_requests: ACTIVEMay 24 22:51:50 ubuntu-890-base snort[6163]: Portscan Detection Config:May 24 22:51:50 ubuntu-890-base snort[6163]: Detect Protocols: TCP UDP ICMP IPMay 24 22:51:50 ubuntu-890-base snort[6163]: Detect Scan Type: portscan portsweep decoy_portscan distributed_portscanMay 24 22:51:50 ubuntu-890-base snort[6163]: Sensitivity Level: LowMay 24 22:51:50 ubuntu-890-base snort[6163]: Memcap (in bytes): 10000000May 24 22:51:50 ubuntu-890-base snort[6163]: Number of Nodes: 26109May 24 22:51:50 ubuntu-890-base snort[6163]: May 24 22:51:50 ubuntu-890-base snort[6163]: Tagged Packet Limit: 256May 24 22:51:50 ubuntu-890-base snort[6163]: May 24 22:51:50 ubuntu-890-base snort[6163]: +-----------------------[thresholding-config]----------------------------------May 24 22:51:50 ubuntu-890-base snort[6163]: | memory-cap : 1048576 bytesMay 24 22:51:50 ubuntu-890-base snort[6163]: +-----------------------[thresholding-global]----------------------------------May 24 22:51:50 ubuntu-890-base snort[6163]: | noneMay 24 22:51:50 ubuntu-890-base snort[6163]: +-----------------------[thresholding-local]-----------------------------------May 24 22:51:50 ubuntu-890-base snort[6163]: | noneMay 24 22:51:50 ubuntu-890-base snort[6163]: +-----------------------[suppression]------------------------------------------May 24 22:51:50 ubuntu-890-base snort[6163]: | noneMay 24 22:51:50 ubuntu-890-base snort[6163]: -------------------------------------------------------------------------------May 24 22:51:50 ubuntu-890-base snort[6163]: Rule application order: activation->dynamic->pass->drop->alert->logMay 24 22:51:50 ubuntu-890-base snort[6163]: Log directory = /var/log/snortMay 24 22:51:50 ubuntu-890-base snort[6163]: Loading dynamic engine /usr/lib/snort_dynamicengine/libsf_engine.so... May 24 22:51:50 ubuntu-890-base snort[6163]: doneMay 24 22:51:50 ubuntu-890-base snort[6163]: Loading all dynamic preprocessor libs from /usr/lib/snort_dynamicpreprocessor/...May 24 22:51:50 ubuntu-890-base snort[6163]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_ssh_preproc.so... May 24 22:51:50 ubuntu-890-base snort[6163]: doneMay 24 22:51:50 ubuntu-890-base snort[6163]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_dcerpc_preproc.so... May 24 22:51:50 ubuntu-890-base snort[6163]: doneMay 24 22:51:50 ubuntu-890-base snort[6163]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_dns_preproc.so... May 24 22:51:50 ubuntu-890-base snort[6163]: doneMay 24 22:51:50 ubuntu-890-base snort[6163]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_smtp_preproc.so... May 24 22:51:50 ubuntu-890-base snort[6163]: doneMay 24 22:51:50 ubuntu-890-base snort[6163]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_ftptelnet_preproc.so... May 24 22:51:50 ubuntu-890-base snort[6163]: doneMay 24 22:51:50 ubuntu-890-base snort[6163]: Finished Loading all dynamic preprocessor libs from /usr/lib/snort_dynamicpreprocessor/May 24 22:51:50 ubuntu-890-base snort[6163]: FTPTelnet Config:May 24 22:51:50 ubuntu-890-base snort[6163]: GLOBAL CONFIGMay 24 22:51:50 ubuntu-890-base snort[6163]: Inspection Type: statefulMay 24 22:51:50 ubuntu-890-base snort[6163]: Check for Encrypted Traffic: YES alert: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Continue to check encrypted data: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: TELNET CONFIG:May 24 22:51:50 ubuntu-890-base snort[6163]: Ports: 23 May 24 22:51:50 ubuntu-890-base snort[6163]: Are You There Threshold: 200May 24 22:51:50 ubuntu-890-base snort[6163]: Normalize: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Detect Anomalies: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: FTP CONFIG:May 24 22:51:50 ubuntu-890-base snort[6163]: FTP Server: defaultMay 24 22:51:50 ubuntu-890-base snort[6163]: Ports: 21 May 24 22:51:50 ubuntu-890-base snort[6163]: Check for Telnet Cmds: YES alert: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Identify open data channels: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: FTP Client: defaultMay 24 22:51:50 ubuntu-890-base snort[6163]: Check for Bounce Attacks: YES alert: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Check for Telnet Cmds: YES alert: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Max Response Length: 256May 24 22:51:50 ubuntu-890-base snort[6163]: SMTP Config:May 24 22:51:50 ubuntu-890-base snort[6163]: Ports: May 24 22:51:50 ubuntu-890-base snort[6163]: 25 May 24 22:51:50 ubuntu-890-base snort[6163]: May 24 22:51:50 ubuntu-890-base snort[6163]: Inspection Type: STATEFULMay 24 22:51:50 ubuntu-890-base snort[6163]: Normalize Spaces: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Ignore Data: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: Ignore TLS Data: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: Ignore Alerts: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: Max Command Length: 0May 24 22:51:50 ubuntu-890-base snort[6163]: Max Header Line Length: 0May 24 22:51:50 ubuntu-890-base snort[6163]: Max Response Line Length: 0May 24 22:51:50 ubuntu-890-base snort[6163]: X-Link2State Alert: YESMay 24 22:51:50 ubuntu-890-base snort[6163]: Drop on X-Link2State Alert: NOMay 24 22:51:50 ubuntu-890-base snort[6163]: DCE/RPC Decoder config:May 24 22:51:50 ubuntu-890-base snort[6163]: Autodetect ports ENABLEDMay 24 22:51:50 ubuntu-890-base snort[6163]: SMB fragmentation ENABLEDMay 24 22:51:50 ubuntu-890-base snort[6163]: DCE/RPC fragmentation ENABLEDMay 24 22:51:50 ubuntu-890-base snort[6163]: Max Frag Size: 3000 bytesMay 24 22:51:50 ubuntu-890-base snort[6163]: Memcap: 100000 KBMay 24 22:51:50 ubuntu-890-base snort[6163]: Alert if memcap exceeded DISABLEDMay 24 22:51:50 ubuntu-890-base snort[6163]: May 24 22:51:50 ubuntu-890-base snort[6163]: DNS config: May 24 22:51:50 ubuntu-890-base snort[6163]: DNS Client rdata txt Overflow Alert: ACTIVEMay 24 22:51:50 ubuntu-890-base snort[6163]: Obsolete DNS RR Types Alert: INACTIVEMay 24 22:51:50 ubuntu-890-base snort[6163]: Experimental DNS RR Types Alert: INACTIVEMay 24 22:51:50 ubuntu-890-base snort[6163]: Ports:May 24 22:51:50 ubuntu-890-base snort[6163]: 53May 24 22:51:50 ubuntu-890-base snort[6163]: May 24 22:51:50 ubuntu-890-base snort[6163]: Warning: flowbits key 'realplayer.playlist' is checked but not ever set.May 24 22:51:50 ubuntu-890-base snort[6163]: Warning: flowbits key 'smb.tree.create.llsrpc' is set but not ever checked.May 24 22:51:50 ubuntu-890-base snort[6163]: Warning: flowbits key 'ms_sql_seen_dns' is checked but not ever set.May 24 22:51:50 ubuntu-890-base snort[6163]: Warning: flowbits key 'community_uri.size.1050' is set but not ever checked.May 24 22:51:50 ubuntu-890-base snort[6163]: 37 out of 512 flowbits in use.May 24 22:51:50 ubuntu-890-base snort[6163]: OpenPcap() device eth0 network lookup: eth0: no IPv4 address assignedMay 24 22:51:50 ubuntu-890-base snort[6163]: Initializing daemon modeMay 24 22:51:50 ubuntu-890-base snort[6165]: OpenPcap() device eth0 network lookup: eth0: no IPv4 address assignedMay 24 22:51:50 ubuntu-890-base snort[6165]: PID path stat checked out ok, PID path set to /var/run/May 24 22:51:50 ubuntu-890-base snort[6165]: Writing PID "6165" to file "/var/run//snort_eth0.pid"May 24 22:51:50 ubuntu-890-base snort[6165]: Daemon initialized, signaled parent pid: 6163May 24 22:51:50 ubuntu-890-base snort[6163]: Daemon parent exitingMay 24 22:51:51 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18May 24 22:51:52 ubuntu-890-base NetworkManager: <info> eth1: Device is fully-supported using driver 'forcedeth'.May 24 22:51:52 ubuntu-890-base NetworkManager: <info> nm_device_init(): waiting for device's worker thread to startMay 24 22:51:52 ubuntu-890-base NetworkManager: <info> nm_device_init(): device's worker thread started, continuing.May 24 22:51:52 ubuntu-890-base NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth1'.May 24 22:51:52 ubuntu-890-base NetworkManager: <info> Deactivating device eth1.May 24 22:51:52 ubuntu-890-base NetworkManager: <info> eth2: Device is fully-supported using driver '3c59x'.May 24 22:51:52 ubuntu-890-base NetworkManager: <info> nm_device_init(): waiting for device's worker thread to startMay 24 22:51:52 ubuntu-890-base NetworkManager: <info> nm_device_init(): device's worker thread started, continuing.May 24 22:51:52 ubuntu-890-base NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth2'.May 24 22:51:52 ubuntu-890-base NetworkManager: <info> Deactivating device eth2.May 24 22:51:52 ubuntu-890-base NetworkManager: <info> Will activate wired connection 'eth2' because it now has a link.May 24 22:51:52 ubuntu-890-base NetworkManager: <debug> [1243219912.237492] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_model_LTR_52327S').May 24 22:51:52 ubuntu-890-base NetworkManager: <info> SWITCH: no current connection, found better connection 'eth2'.May 24 22:51:52 ubuntu-890-base hcid[6460]: Bluetooth HCI daemonMay 24 22:51:52 ubuntu-890-base hcid[6460]: Starting SDP serverMay 24 22:51:52 ubuntu-890-base hcid[6460]: Created local server at unix:abstract=/var/run/dbus-P5AQpiLpiW,guid=b7cb90e5ea8138362c8c63094a1a07c8May 24 22:51:52 ubuntu-890-base input[6491]: Bluetooth Input daemonMay 24 22:51:52 ubuntu-890-base input[6491]: Registered input manager path:/org/bluez/inputMay 24 22:51:52 ubuntu-890-base audio[6504]: Bluetooth Audio daemonMay 24 22:51:52 ubuntu-890-base audio[6504]: Unix socket created: 5May 24 22:51:52 ubuntu-890-base audio[6504]: audio.conf: Key file does not have key 'Enable'May 24 22:51:52 ubuntu-890-base audio[6504]: audio.conf: Key file does not have key 'Disable'May 24 22:51:52 ubuntu-890-base audio[6504]: add_service_record: got record id 0x10000May 24 22:51:52 ubuntu-890-base audio[6504]: audio.conf: Key file does not have key 'Disable'May 24 22:51:52 ubuntu-890-base audio[6504]: audio.conf: Key file does not have group 'A2DP'May 24 22:51:52 ubuntu-890-base audio[6504]: audio.conf: Key file does not have group 'A2DP'May 24 22:51:52 ubuntu-890-base audio[6504]: audio.conf: Key file does not have group 'A2DP'May 24 22:51:52 ubuntu-890-base audio[6504]: audio.conf: Key file does not have group 'A2DP'May 24 22:51:52 ubuntu-890-base audio[6504]: SEP 0x62d390 registered: type:0 codec:0 seid:1May 24 22:51:52 ubuntu-890-base audio[6504]: add_service_record: got record id 0x10001May 24 22:51:52 ubuntu-890-base audio[6504]: add_service_record: got record id 0x10002May 24 22:51:52 ubuntu-890-base audio[6504]: add_service_record: got record id 0x10003May 24 22:51:52 ubuntu-890-base audio[6504]: Registered manager path:/org/bluez/audioMay 24 22:51:52 ubuntu-890-base hal_lpadmin: addMay 24 22:51:52 ubuntu-890-base hal_lpadmin: URIs: ['usb://Lexmark/%206500%20Series', 'hal:///org/freedesktop/Hal/devices/usb_device_43d_10f_16Y068531148173_if1_printer_noserial']May 24 22:51:52 ubuntu-890-base hal_lpadmin: HPLIP Fax URIs: NoneMay 24 22:51:52 ubuntu-890-base hal_lpadmin: Not adding printer: _6500_Series already existsMay 24 22:51:53 ubuntu-890-base NetworkManager: <info> Will activate connection 'eth2'.May 24 22:51:53 ubuntu-890-base NetworkManager: <info> Device eth2 activation scheduled...May 24 22:51:53 ubuntu-890-base NetworkManager: <debug> [1243219913.246643] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth').May 24 22:51:53 ubuntu-890-base NetworkManager: <debug> [1243219913.248216] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_43d_10f_16Y068531148173_if1_printer_noserial').May 24 22:51:53 ubuntu-890-base NetworkManager: <info> Activation (eth2) started...May 24 22:51:53 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 1 of 5 (Device Prepare) scheduled...May 24 22:51:53 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 1 of 5 (Device Prepare) started...May 24 22:51:53 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) scheduled...May 24 22:51:53 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 1 of 5 (Device Prepare) complete.May 24 22:51:53 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) starting...May 24 22:51:53 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) successful.May 24 22:51:53 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 3 of 5 (IP Configure Start) scheduled.May 24 22:51:53 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) complete.May 24 22:51:53 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 3 of 5 (IP Configure Start) started...May 24 22:51:54 ubuntu-890-base NetworkManager: <info> Activation (eth2) Beginning DHCP transaction.May 24 22:51:54 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 3 of 5 (IP Configure Start) complete.May 24 22:51:54 ubuntu-890-base NetworkManager: <info> DHCP daemon state is now 12 (successfully started) for interface eth2May 24 22:51:54 ubuntu-890-base squid[6594]: Squid Parent: child process 6597 startedMay 24 22:51:54 ubuntu-890-base squid[6597]: Starting Squid Cache version 2.6.STABLE18 for amd64-debian-linux-gnu...May 24 22:51:54 ubuntu-890-base squid[6597]: Process ID 6597May 24 22:51:54 ubuntu-890-base squid[6597]: With 1024 file descriptors availableMay 24 22:51:54 ubuntu-890-base squid[6597]: Using epoll for the IO loopMay 24 22:51:54 ubuntu-890-base squid[6597]: DNS Socket created at 0.0.0.0, port 59653, FD 6May 24 22:51:54 ubuntu-890-base squid[6597]: Adding domain Belkin from /etc/resolv.confMay 24 22:51:54 ubuntu-890-base squid[6597]: Adding nameserver 192.168.2.1 from /etc/resolv.confMay 24 22:51:54 ubuntu-890-base squid[6597]: User-Agent logging is disabled.May 24 22:51:54 ubuntu-890-base squid[6597]: Referer logging is disabled.May 24 22:51:55 ubuntu-890-base squid[6597]: Unlinkd pipe opened on FD 11May 24 22:51:55 ubuntu-890-base squid[6597]: Swap maxSize 102400 KB, estimated 7876 objectsMay 24 22:51:55 ubuntu-890-base squid[6597]: Target number of buckets: 393May 24 22:51:55 ubuntu-890-base squid[6597]: Using 8192 Store bucketsMay 24 22:51:55 ubuntu-890-base squid[6597]: Max Mem size: 8192 KBMay 24 22:51:55 ubuntu-890-base squid[6597]: Max Swap size: 102400 KBMay 24 22:51:55 ubuntu-890-base squid[6597]: Local cache digest enabled; rebuild/rewrite every 3600/3600 secMay 24 22:51:55 ubuntu-890-base NetworkManager: <info> DHCP daemon state is now 1 (starting) for interface eth2May 24 22:51:55 ubuntu-890-base arpwatch: Running as uid=124 gid=138May 24 22:51:55 ubuntu-890-base arpwatch: listening on eth0May 24 22:51:55 ubuntu-890-base squid[6597]: Rebuilding storage in /var/spool/squid (CLEAN)May 24 22:51:55 ubuntu-890-base squid[6597]: Using Least Load store dir selectionMay 24 22:51:55 ubuntu-890-base squid[6597]: Set Current Directory to /var/spool/squidMay 24 22:51:55 ubuntu-890-base lircd-0.8.3pre1[6646]: garbage after 'name' token in line 335 ignoredMay 24 22:51:55 ubuntu-890-base lircd-0.8.3pre1[6647]: lircd(userspace) readyMay 24 22:51:55 ubuntu-890-base squid[6597]: Loaded Icons.May 24 22:51:55 ubuntu-890-base squid[6597]: Accepting proxy HTTP connections at 0.0.0.0, port 3128, FD 13.May 24 22:51:55 ubuntu-890-base squid[6597]: Accepting ICP messages at 0.0.0.0, port 3130, FD 14.May 24 22:51:55 ubuntu-890-base squid[6597]: HTCP Disabled.May 24 22:51:55 ubuntu-890-base squid[6597]: WCCP Disabled.May 24 22:51:55 ubuntu-890-base squid[6597]: Ready to serve requests.May 24 22:51:55 ubuntu-890-base squid[6597]: Done reading /var/spool/squid swaplog (0 entries)May 24 22:51:55 ubuntu-890-base squid[6597]: Finished rebuilding storage from disk.May 24 22:51:55 ubuntu-890-base squid[6597]: 0 Entries scannedMay 24 22:51:55 ubuntu-890-base squid[6597]: 0 Invalid entries.May 24 22:51:55 ubuntu-890-base squid[6597]: 0 With invalid flags.May 24 22:51:55 ubuntu-890-base squid[6597]: 0 Objects loaded.May 24 22:51:55 ubuntu-890-base squid[6597]: 0 Objects expired.May 24 22:51:55 ubuntu-890-base squid[6597]: 0 Objects cancelled.May 24 22:51:55 ubuntu-890-base squid[6597]: 0 Duplicate URLs purged.May 24 22:51:55 ubuntu-890-base squid[6597]: 0 Swapfile clashes avoided.May 24 22:51:55 ubuntu-890-base squid[6597]: Took 0.6 seconds ( 0.0 objects/sec).May 24 22:51:55 ubuntu-890-base squid[6597]: Beginning Validation ProcedureMay 24 22:51:55 ubuntu-890-base squid[6597]: Completed Validation ProcedureMay 24 22:51:55 ubuntu-890-base squid[6597]: Validated 0 EntriesMay 24 22:51:55 ubuntu-890-base squid[6597]: store_swap_size = 0kMay 24 22:51:55 ubuntu-890-base squid[6597]: storeLateRelease: released 0 objectsMay 24 22:51:56 ubuntu-890-base dhclient: DHCPREQUEST of 192.168.2.3 on eth2 to 255.255.255.255 port 67May 24 22:51:56 ubuntu-890-base dhclient: DHCPACK of 192.168.2.3 from 192.168.2.1May 25 02:51:56 ubuntu-890-base avahi-daemon[5638]: Joining mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 25 02:51:56 ubuntu-890-base avahi-daemon[5638]: New relevant interface eth2.IPv4 for mDNS.May 25 02:51:56 ubuntu-890-base avahi-daemon[5638]: Registering new address record for 192.168.2.3 on eth2.IPv4.May 24 22:51:56 ubuntu-890-base NetworkManager: <info> DHCP daemon state is now 4 (reboot) for interface eth2May 24 22:51:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 4 of 5 (IP Configure Get) scheduled...May 24 22:51:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 4 of 5 (IP Configure Get) started...May 24 22:51:56 ubuntu-890-base dhclient: bound to 192.168.2.3 -- renewal in 2147483648 seconds.May 24 22:51:56 ubuntu-890-base NetworkManager: <info> Retrieved the following IP4 configuration from the DHCP daemon:May 24 22:51:56 ubuntu-890-base NetworkManager: <info> address 192.168.2.3May 24 22:51:56 ubuntu-890-base NetworkManager: <info> netmask 255.255.255.0May 24 22:51:56 ubuntu-890-base NetworkManager: <info> broadcast 192.168.2.255May 24 22:51:56 ubuntu-890-base NetworkManager: <info> gateway 192.168.2.1May 24 22:51:56 ubuntu-890-base NetworkManager: <info> nameserver 192.168.2.1May 24 22:51:56 ubuntu-890-base NetworkManager: <info> domain name 'Belkin'May 24 22:51:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 5 of 5 (IP Configure Commit) scheduled...May 24 22:51:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 4 of 5 (IP Configure Get) complete.May 24 22:51:56 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 5 of 5 (IP Configure Commit) started...May 25 02:51:56 ubuntu-890-base avahi-daemon[5638]: Withdrawing address record for 192.168.2.3 on eth2.May 25 02:51:56 ubuntu-890-base avahi-daemon[5638]: Leaving mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 25 02:51:56 ubuntu-890-base avahi-daemon[5638]: Interface eth2.IPv4 no longer relevant for mDNS.May 25 02:51:56 ubuntu-890-base avahi-daemon[5638]: Joining mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 25 02:51:56 ubuntu-890-base avahi-daemon[5638]: New relevant interface eth2.IPv4 for mDNS.May 25 02:51:56 ubuntu-890-base avahi-daemon[5638]: Registering new address record for 192.168.2.3 on eth2.IPv4.May 24 22:51:56 ubuntu-890-base snort[6165]: Preprocessor/Decoder Rule Count: 0May 24 22:51:56 ubuntu-890-base snort[6165]: Snort initialization completed successfully (pid=6165)May 24 22:51:56 ubuntu-890-base snort[6165]: Not Using PCAP_FRAMESMay 24 22:51:57 ubuntu-890-base NetworkManager: <info> Clearing nscd hosts cache.May 24 22:51:57 ubuntu-890-base NetworkManager: <WARN> nm_spawn_process(): nm_spawn_process('/usr/sbin/nscd -i hosts'): could not spawn process. (Failed to execute child process "/usr/sbin/nscd" (No such file or directory))May 24 22:51:57 ubuntu-890-base NetworkManager: <info> Activation (eth2) Finish handler scheduled.May 24 22:51:57 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 5 of 5 (IP Configure Commit) complete.May 24 22:51:57 ubuntu-890-base NetworkManager: <info> Activation (eth2) successful, device activated.May 24 22:51:57 ubuntu-890-base ntpdate[7005]: adjust time server 91.189.94.4 offset -0.000159 secMay 25 02:51:58 ubuntu-890-base avahi-daemon[5638]: Registering new address record for fe80::204:76ff:feec:c7d6 on eth2.*.May 24 22:52:09 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7May 24 22:52:11 ubuntu-890-base init: tty4 main process (5202) killed by TERM signalMay 24 22:52:11 ubuntu-890-base init: tty5 main process (5203) killed by TERM signalMay 24 22:52:11 ubuntu-890-base init: tty2 main process (5205) killed by TERM signalMay 24 22:52:11 ubuntu-890-base init: tty3 main process (5207) killed by TERM signalMay 24 22:52:11 ubuntu-890-base init: tty6 main process (5209) killed by TERM signalMay 24 22:52:11 ubuntu-890-base init: tty1 main process (7038) killed by TERM signalMay 24 22:52:12 ubuntu-890-base gdm[7159]: CRITICAL: gdm_connection_close: assertion `conn != NULL' failedMay 24 22:52:12 ubuntu-890-base gdm[7159]: CRITICAL: gdm_connection_close: assertion `conn != NULL' failedMay 24 22:52:12 ubuntu-890-base gdm[7159]: CRITICAL: gdm_connection_close: assertion `conn != NULL' failedMay 24 22:52:12 ubuntu-890-base gdm[7159]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:52:12 ubuntu-890-base gdm[7159]: WARNING: Request for invalid configuration key xdmcp/PingIntervalSeconds=15May 24 22:52:12 ubuntu-890-base gdm[7159]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:52:12 ubuntu-890-base gdm[7159]: WARNING: Request for invalid configuration key xdmcp/PingIntervalSeconds=15May 24 22:52:13 ubuntu-890-base gdm[7159]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:52:13 ubuntu-890-base gdm[7159]: WARNING: Request for invalid configuration key daemon/ServAuthDir=/var/lib/gdmMay 24 22:52:13 ubuntu-890-base gdm[7159]: WARNING: gdm_slave_send: Can't open fifo!May 24 22:52:13 ubuntu-890-base gdm[7159]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:52:13 ubuntu-890-base gdm[7159]: WARNING: Request for invalid configuration key daemon/ServAuthDir=/var/lib/gdmMay 24 22:52:13 ubuntu-890-base gdm[7159]: WARNING: gdm_auth_secure_display: Cannot safely open May 24 22:52:13 ubuntu-890-base gdm[7159]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:52:13 ubuntu-890-base gdm[7159]: WARNING: Request for invalid configuration key daemon/ConsoleCannotHandle=am,ar,az,bn,el,fa,gu,hi,ja,ko,ml,mr,pa,ta,zhMay 24 22:52:13 ubuntu-890-base gdm[7159]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failedMay 24 22:52:13 ubuntu-890-base gdm[7159]: WARNING: Request for invalid configuration key daemon/ConsoleNotify=trueMay 25 02:52:13 ubuntu-890-base avahi-daemon[5638]: Got SIGTERM, quitting.May 25 02:52:13 ubuntu-890-base avahi-daemon[5638]: Leaving mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 24 22:52:14 ubuntu-890-base 9-_-_var_-_log_-_syslog: 9-_-_var_-_log_-_syslog: client (pid 5948) killed by signal 15, stoppingMay 24 22:52:14 ubuntu-890-base 8-_-_var_-_log_-_mail.log: 8-_-_var_-_log_-_mail.log: client (pid 5947) killed by signal 15, stoppingMay 24 22:52:14 ubuntu-890-base rpc.statd[5030]: Caught signal 15, un-registering and exiting.May 24 22:52:16 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13May 24 22:52:19 ubuntu-890-base mysqld[5733]: 090524 22:52:19 [Note] /usr/sbin/mysqld: Normal shutdownMay 24 22:52:19 ubuntu-890-base mysqld[5733]: May 24 22:52:19 ubuntu-890-base mysqld[5733]: 090524 22:52:19 InnoDB: Starting shutdown...May 24 22:52:21 ubuntu-890-base mysqld[5733]: 090524 22:52:21 InnoDB: Shutdown completed; log sequence number 0 43655May 24 22:52:21 ubuntu-890-base mysqld[5733]: 090524 22:52:21 [Note] /usr/sbin/mysqld: Shutdown completeMay 24 22:52:21 ubuntu-890-base mysqld[5733]: May 24 22:52:21 ubuntu-890-base mysqld_safe[7627]: endedMay 24 22:52:25 ubuntu-890-base squid[6597]: Preparing for shutdown after 0 requestsMay 24 22:52:25 ubuntu-890-base squid[6597]: Waiting 30 seconds for active connections to finishMay 24 22:52:25 ubuntu-890-base squid[6597]: FD 13 Closing HTTP connectionMay 24 22:52:25 ubuntu-890-base squid[6597]: Shutting down...May 24 22:52:25 ubuntu-890-base squid[6597]: FD 14 Closing ICP connectionMay 24 22:52:25 ubuntu-890-base squid[6597]: Closing unlinkd pipe on FD 11May 24 22:52:25 ubuntu-890-base squid[6597]: storeDirWriteCleanLogs: Starting...May 24 22:52:25 ubuntu-890-base squid[6597]: Finished. Wrote 0 entries.May 24 22:52:25 ubuntu-890-base squid[6597]: Took 0.0 seconds ( 0.0 entries/sec).May 24 22:52:25 ubuntu-890-base squid[6597]: Squid Cache (Version 2.6.STABLE18): Exiting normally.May 24 22:52:25 ubuntu-890-base squid[6594]: Squid Parent: child process 6597 exited with status 0May 24 22:52:27 ubuntu-890-base arpwatch: exitingMay 24 22:52:28 ubuntu-890-base lircd-0.8.3pre1[6647]: caught signalMay 24 22:52:28 ubuntu-890-base named[5551]: shutting down: flushing changesMay 24 22:52:28 ubuntu-890-base named[5551]: stopping command channel on 127.0.0.1#953May 24 22:52:28 ubuntu-890-base named[5551]: stopping command channel on ::1#953May 24 22:52:28 ubuntu-890-base named[5551]: no longer listening on ::#53May 24 22:52:28 ubuntu-890-base named[5551]: no longer listening on 127.0.0.1#53May 24 22:52:28 ubuntu-890-base named[5551]: exitingMay 24 23:41:58 ubuntu-890-base NetworkManager: <info> starting...May 24 23:41:59 ubuntu-890-base named[5530]: starting BIND 9.4.2-P2 -u bindMay 24 23:41:59 ubuntu-890-base named[5530]: found 2 CPUs, using 2 worker threadsMay 24 23:41:59 ubuntu-890-base named[5530]: loading configuration from '/etc/bind/named.conf'May 24 23:41:59 ubuntu-890-base named[5530]: listening on IPv6 interfaces, port 53May 24 23:41:59 ubuntu-890-base named[5530]: listening on IPv4 interface lo, 127.0.0.1#53May 24 23:41:59 ubuntu-890-base named[5530]: automatic empty zone: 254.169.IN-ADDR.ARPAMay 24 23:41:59 ubuntu-890-base named[5530]: automatic empty zone: 2.0.192.IN-ADDR.ARPAMay 24 23:41:59 ubuntu-890-base named[5530]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPAMay 24 23:41:59 ubuntu-890-base named[5530]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPAMay 24 23:41:59 ubuntu-890-base named[5530]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPAMay 24 23:41:59 ubuntu-890-base named[5530]: automatic empty zone: D.F.IP6.ARPAMay 24 23:41:59 ubuntu-890-base named[5530]: automatic empty zone: 8.E.F.IP6.ARPAMay 24 23:41:59 ubuntu-890-base named[5530]: automatic empty zone: 9.E.F.IP6.ARPAMay 24 23:41:59 ubuntu-890-base named[5530]: automatic empty zone: A.E.F.IP6.ARPAMay 24 23:41:59 ubuntu-890-base named[5530]: automatic empty zone: B.E.F.IP6.ARPAMay 24 23:41:59 ubuntu-890-base named[5530]: command channel listening on 127.0.0.1#953May 24 23:41:59 ubuntu-890-base named[5530]: command channel listening on ::1#953May 24 23:41:59 ubuntu-890-base named[5530]: zone 0.in-addr.arpa/IN: loaded serial 1May 24 23:41:59 ubuntu-890-base named[5530]: zone 127.in-addr.arpa/IN: loaded serial 1May 24 23:41:59 ubuntu-890-base named[5530]: zone 255.in-addr.arpa/IN: loaded serial 1May 24 23:41:59 ubuntu-890-base named[5530]: zone localhost/IN: loaded serial 2May 24 23:41:59 ubuntu-890-base named[5530]: runningMay 24 23:42:00 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12May 24 23:42:00 ubuntu-890-base avahi-daemon[5617]: Found user 'avahi' (UID 115) and group 'avahi' (GID 128).May 24 23:42:00 ubuntu-890-base avahi-daemon[5617]: Successfully dropped root privileges.May 24 23:42:00 ubuntu-890-base avahi-daemon[5617]: avahi-daemon 0.6.22 starting up.May 24 23:42:00 ubuntu-890-base avahi-daemon[5617]: Successfully called chroot().May 25 03:42:00 ubuntu-890-base avahi-daemon[5617]: Successfully dropped remaining capabilities.May 25 03:42:00 ubuntu-890-base avahi-daemon[5617]: No service file found in /etc/avahi/services.May 25 03:42:00 ubuntu-890-base avahi-daemon[5617]: Network interface enumeration completed.May 25 03:42:00 ubuntu-890-base avahi-daemon[5617]: Registering HINFO record with values 'X86_64'/'LINUX'.May 25 03:42:00 ubuntu-890-base avahi-daemon[5617]: Server startup complete. Host name is ubuntu-890-base.local. Local service cookie is 389842356.May 24 23:42:01 ubuntu-890-base mysqld_safe[5709]: startedMay 24 23:42:01 ubuntu-890-base mysqld[5712]: 090524 23:42:01 InnoDB: Started; log sequence number 0 43655May 24 23:42:01 ubuntu-890-base mysqld[5712]: 090524 23:42:01 [Note] /usr/sbin/mysqld: ready for connections.May 24 23:42:01 ubuntu-890-base mysqld[5712]: Version: '5.0.51a-3ubuntu5.4' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu)May 24 23:42:02 ubuntu-890-base /etc/mysql/debian-start[5750]: Upgrading MySQL tables if necessary.May 24 23:42:02 ubuntu-890-base /etc/mysql/debian-start[5755]: Looking for 'mysql' in: /usr/bin/mysqlMay 24 23:42:02 ubuntu-890-base /etc/mysql/debian-start[5755]: Looking for 'mysqlcheck' in: /usr/bin/mysqlcheckMay 24 23:42:02 ubuntu-890-base /etc/mysql/debian-start[5755]: This installation of MySQL is already upgraded to 5.0.51a, use --force if you still need to run mysql_upgradeMay 24 23:42:02 ubuntu-890-base /etc/mysql/debian-start[5767]: Checking for insecure root accounts.May 24 23:42:02 ubuntu-890-base /etc/mysql/debian-start[5778]: Checking for crashed MySQL tables.May 24 23:42:09 ubuntu-890-base approx: Version: 3.0.0May 24 23:42:10 ubuntu-890-base bcfg2-server[5869]: Failed to load ssl key /etc/bcfg2.key Traceback (most recent call last): File "/usr/lib/python2.5/site-packages/Bcfg2/Component.py", line 177, in __init__ TLSServer.__init__(self, location, keyfile, CobaltXMLRPCRequestHandler) File "/usr/lib/python2.5/site-packages/Bcfg2/Component.py", line 91, in __init__ s = open(keyfile).read() IOError: [Errno 2] No such file or directory: '/etc/bcfg2.key'May 24 23:42:10 ubuntu-890-base bld[5875]: fopen /var/run/bld/bld.pid: No such file or directoryMay 24 23:42:12 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'any_ADDRESS' defined, value len = 15 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = 0.0.0.0/0.0.0.0May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'lo_ADDRESS' defined, value len = 19 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = 127.0.0.0/255.0.0.0May 24 23:42:14 ubuntu-890-base snort[6142]: Parsing Rules file /etc/snort/snort.confMay 24 23:42:14 ubuntu-890-base snort[6142]: Var 'HOME_NET' redefinedMay 24 23:42:14 ubuntu-890-base snort[6142]: Var 'EXTERNAL_NET' defined, value len = 3 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = anyMay 24 23:42:14 ubuntu-890-base snort[6142]: Var 'DNS_SERVERS' defined, value len = 17 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = [192.168.2.0/109]May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'SMTP_SERVERS' defined, value len = 17 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = [192.168.2.0/109]May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'HTTP_SERVERS' defined, value len = 17 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = [192.168.2.0/109]May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'SQL_SERVERS' defined, value len = 17 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = [192.168.2.0/109]May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'TELNET_SERVERS' defined, value len = 17 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = [192.168.2.0/109]May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'SNMP_SERVERS' defined, value len = 17 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = [192.168.2.0/109]May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'HTTP_PORTS' defined, value len = 2 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = 80May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'SHELLCODE_PORTS' defined, value len = 3 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = !80May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'ORACLE_PORTS' defined, value len = 4 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = 1521May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'AIM_SERVERS' defined, value len = 185 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: May 24 23:42:14 ubuntu-890-base snort[6142]: [64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9May 24 23:42:14 ubuntu-890-base snort[6142]: .0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24]May 24 23:42:14 ubuntu-890-base snort[6142]: Var 'RULE_PATH' defined, value len = 16 charsMay 24 23:42:14 ubuntu-890-base snort[6142]: , value = /etc/snort/rulesMay 24 23:42:14 ubuntu-890-base snort[6142]: ,-----------[Flow Config]----------------------May 24 23:42:14 ubuntu-890-base snort[6142]: | Stats Interval: 0May 24 23:42:14 ubuntu-890-base snort[6142]: | Hash Method: 2May 24 23:42:14 ubuntu-890-base snort[6142]: | Memcap: 10485760May 24 23:42:14 ubuntu-890-base snort[6142]: | Rows : 4099May 24 23:42:14 ubuntu-890-base snort[6142]: | Overhead Bytes: 32800(%0.31)May 24 23:42:14 ubuntu-890-base snort[6142]: `----------------------------------------------May 24 23:42:14 ubuntu-890-base snort[6142]: Frag3 global config:May 24 23:42:14 ubuntu-890-base snort[6142]: Max frags: 65536May 24 23:42:14 ubuntu-890-base snort[6142]: Fragment memory cap: 4194304 bytesMay 24 23:42:14 ubuntu-890-base snort[6142]: Frag3 engine config:May 24 23:42:14 ubuntu-890-base snort[6142]: Target-based policy: FIRSTMay 24 23:42:14 ubuntu-890-base snort[6142]: Fragment timeout: 60 secondsMay 24 23:42:14 ubuntu-890-base snort[6142]: Fragment min_ttl: 1May 24 23:42:14 ubuntu-890-base snort[6142]: Fragment ttl_limit: 5May 24 23:42:14 ubuntu-890-base snort[6142]: Fragment Problems: 1May 24 23:42:14 ubuntu-890-base snort[6142]: Bound Addresses: 0.0.0.0/0.0.0.0May 24 23:42:14 ubuntu-890-base snort[6142]: Stream5 global config:May 24 23:42:14 ubuntu-890-base snort[6142]: Track TCP sessions: ACTIVEMay 24 23:42:14 ubuntu-890-base snort[6142]: Max TCP sessions: 8192May 24 23:42:14 ubuntu-890-base snort[6142]: Memcap (for reassembly packet storage): 8388608May 24 23:42:14 ubuntu-890-base snort[6142]: Track UDP sessions: INACTIVEMay 24 23:42:14 ubuntu-890-base snort[6142]: Track ICMP sessions: INACTIVEMay 24 23:42:14 ubuntu-890-base snort[6142]: Stream5 TCP Policy config:May 24 23:42:14 ubuntu-890-base snort[6142]: Reassembly Policy: FIRSTMay 24 23:42:14 ubuntu-890-base snort[6142]: Timeout: 30 secondsMay 24 23:42:14 ubuntu-890-base snort[6142]: Min ttl: 1May 24 23:42:14 ubuntu-890-base snort[6142]: Options:May 24 23:42:14 ubuntu-890-base snort[6142]: Static Flushpoint Sizes: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Reassembly Ports:May 24 23:42:14 ubuntu-890-base snort[6142]: 21 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 23 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 25 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 42 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 53 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 80 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 110 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 111 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 135 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 136 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 137 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 139 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 143 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 445 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 513 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 1433 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 1521 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: 3306 client (Footprint) May 24 23:42:14 ubuntu-890-base snort[6142]: Bound Addresses:0.0.0.0/0.0.0.0May 24 23:42:14 ubuntu-890-base snort[6142]: HttpInspect Config:May 24 23:42:14 ubuntu-890-base snort[6142]: GLOBAL CONFIGMay 24 23:42:14 ubuntu-890-base snort[6142]: Max Pipeline Requests: 0May 24 23:42:14 ubuntu-890-base snort[6142]: Inspection Type: STATELESSMay 24 23:42:14 ubuntu-890-base snort[6142]: Detect Proxy Usage: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: IIS Unicode Map Filename: /etc/snort/unicode.mapMay 24 23:42:14 ubuntu-890-base snort[6142]: IIS Unicode Map Codepage: 1252May 24 23:42:14 ubuntu-890-base snort[6142]: DEFAULT SERVER CONFIG:May 24 23:42:14 ubuntu-890-base snort[6142]: Server profile: AllMay 24 23:42:14 ubuntu-890-base snort[6142]: Ports: 80 8080 8180 May 24 23:42:14 ubuntu-890-base snort[6142]: Flow Depth: 300May 24 23:42:14 ubuntu-890-base snort[6142]: Max Chunk Length: 500000May 24 23:42:14 ubuntu-890-base snort[6142]: Inspect Pipeline Requests: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: URI Discovery Strict Mode: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: Allow Proxy Usage: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: Disable Alerting: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: Oversize Dir Length: 500May 24 23:42:14 ubuntu-890-base snort[6142]: Only inspect URI: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: Ascii: YES alert: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: Double Decoding: YES alert: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: %U Encoding: YES alert: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Bare Byte: YES alert: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Base36: OFFMay 24 23:42:14 ubuntu-890-base snort[6142]: UTF 8: OFFMay 24 23:42:14 ubuntu-890-base snort[6142]: IIS Unicode: YES alert: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Multiple Slash: YES alert: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: IIS Backslash: YES alert: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: Directory Traversal: YES alert: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: Web Root Traversal: YES alert: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Apache WhiteSpace: YES alert: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: IIS Delimiter: YES alert: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: IIS Unicode Map: GLOBAL IIS UNICODE MAP CONFIGMay 24 23:42:14 ubuntu-890-base snort[6142]: Non-RFC Compliant Characters: NONEMay 24 23:42:14 ubuntu-890-base snort[6142]: Whitespace Characters: 0x09 0x0b 0x0c 0x0d May 24 23:42:14 ubuntu-890-base snort[6142]: rpc_decode arguments:May 24 23:42:14 ubuntu-890-base snort[6142]: Ports to decode RPC on: 111 32771 May 24 23:42:14 ubuntu-890-base snort[6142]: alert_fragments: INACTIVEMay 24 23:42:14 ubuntu-890-base snort[6142]: alert_large_fragments: ACTIVEMay 24 23:42:14 ubuntu-890-base snort[6142]: alert_incomplete: ACTIVEMay 24 23:42:14 ubuntu-890-base snort[6142]: alert_multiple_requests: ACTIVEMay 24 23:42:14 ubuntu-890-base snort[6142]: Portscan Detection Config:May 24 23:42:14 ubuntu-890-base snort[6142]: Detect Protocols: TCP UDP ICMP IPMay 24 23:42:14 ubuntu-890-base snort[6142]: Detect Scan Type: portscan portsweep decoy_portscan distributed_portscanMay 24 23:42:14 ubuntu-890-base snort[6142]: Sensitivity Level: LowMay 24 23:42:14 ubuntu-890-base snort[6142]: Memcap (in bytes): 10000000May 24 23:42:14 ubuntu-890-base snort[6142]: Number of Nodes: 26109May 24 23:42:14 ubuntu-890-base snort[6142]: May 24 23:42:14 ubuntu-890-base snort[6142]: Tagged Packet Limit: 256May 24 23:42:14 ubuntu-890-base snort[6142]: May 24 23:42:14 ubuntu-890-base snort[6142]: +-----------------------[thresholding-config]----------------------------------May 24 23:42:14 ubuntu-890-base snort[6142]: | memory-cap : 1048576 bytesMay 24 23:42:14 ubuntu-890-base snort[6142]: +-----------------------[thresholding-global]----------------------------------May 24 23:42:14 ubuntu-890-base snort[6142]: | noneMay 24 23:42:14 ubuntu-890-base snort[6142]: +-----------------------[thresholding-local]-----------------------------------May 24 23:42:14 ubuntu-890-base snort[6142]: | noneMay 24 23:42:14 ubuntu-890-base snort[6142]: +-----------------------[suppression]------------------------------------------May 24 23:42:14 ubuntu-890-base snort[6142]: | noneMay 24 23:42:14 ubuntu-890-base snort[6142]: -------------------------------------------------------------------------------May 24 23:42:14 ubuntu-890-base snort[6142]: Rule application order: activation->dynamic->pass->drop->alert->logMay 24 23:42:14 ubuntu-890-base snort[6142]: Log directory = /var/log/snortMay 24 23:42:14 ubuntu-890-base snort[6142]: Loading dynamic engine /usr/lib/snort_dynamicengine/libsf_engine.so... May 24 23:42:14 ubuntu-890-base snort[6142]: doneMay 24 23:42:14 ubuntu-890-base snort[6142]: Loading all dynamic preprocessor libs from /usr/lib/snort_dynamicpreprocessor/...May 24 23:42:14 ubuntu-890-base snort[6142]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_ssh_preproc.so... May 24 23:42:14 ubuntu-890-base snort[6142]: doneMay 24 23:42:14 ubuntu-890-base snort[6142]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_dcerpc_preproc.so... May 24 23:42:14 ubuntu-890-base snort[6142]: doneMay 24 23:42:14 ubuntu-890-base snort[6142]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_dns_preproc.so... May 24 23:42:14 ubuntu-890-base snort[6142]: doneMay 24 23:42:14 ubuntu-890-base snort[6142]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_smtp_preproc.so... May 24 23:42:14 ubuntu-890-base snort[6142]: doneMay 24 23:42:14 ubuntu-890-base snort[6142]: Loading dynamic preprocessor library /usr/lib/snort_dynamicpreprocessor//libsf_ftptelnet_preproc.so... May 24 23:42:14 ubuntu-890-base snort[6142]: doneMay 24 23:42:14 ubuntu-890-base snort[6142]: Finished Loading all dynamic preprocessor libs from /usr/lib/snort_dynamicpreprocessor/May 24 23:42:14 ubuntu-890-base snort[6142]: FTPTelnet Config:May 24 23:42:14 ubuntu-890-base snort[6142]: GLOBAL CONFIGMay 24 23:42:14 ubuntu-890-base snort[6142]: Inspection Type: statefulMay 24 23:42:14 ubuntu-890-base snort[6142]: Check for Encrypted Traffic: YES alert: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Continue to check encrypted data: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: TELNET CONFIG:May 24 23:42:14 ubuntu-890-base snort[6142]: Ports: 23 May 24 23:42:14 ubuntu-890-base snort[6142]: Are You There Threshold: 200May 24 23:42:14 ubuntu-890-base snort[6142]: Normalize: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Detect Anomalies: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: FTP CONFIG:May 24 23:42:14 ubuntu-890-base snort[6142]: FTP Server: defaultMay 24 23:42:14 ubuntu-890-base snort[6142]: Ports: 21 May 24 23:42:14 ubuntu-890-base snort[6142]: Check for Telnet Cmds: YES alert: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Identify open data channels: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: FTP Client: defaultMay 24 23:42:14 ubuntu-890-base snort[6142]: Check for Bounce Attacks: YES alert: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Check for Telnet Cmds: YES alert: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Max Response Length: 256May 24 23:42:14 ubuntu-890-base snort[6142]: SMTP Config:May 24 23:42:14 ubuntu-890-base snort[6142]: Ports: May 24 23:42:14 ubuntu-890-base snort[6142]: 25 May 24 23:42:14 ubuntu-890-base snort[6142]: May 24 23:42:14 ubuntu-890-base snort[6142]: Inspection Type: STATEFULMay 24 23:42:14 ubuntu-890-base snort[6142]: Normalize Spaces: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Ignore Data: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: Ignore TLS Data: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: Ignore Alerts: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: Max Command Length: 0May 24 23:42:14 ubuntu-890-base snort[6142]: Max Header Line Length: 0May 24 23:42:14 ubuntu-890-base snort[6142]: Max Response Line Length: 0May 24 23:42:14 ubuntu-890-base snort[6142]: X-Link2State Alert: YESMay 24 23:42:14 ubuntu-890-base snort[6142]: Drop on X-Link2State Alert: NOMay 24 23:42:14 ubuntu-890-base snort[6142]: DCE/RPC Decoder config:May 24 23:42:14 ubuntu-890-base snort[6142]: Autodetect ports ENABLEDMay 24 23:42:14 ubuntu-890-base snort[6142]: SMB fragmentation ENABLEDMay 24 23:42:14 ubuntu-890-base snort[6142]: DCE/RPC fragmentation ENABLEDMay 24 23:42:14 ubuntu-890-base snort[6142]: Max Frag Size: 3000 bytesMay 24 23:42:14 ubuntu-890-base snort[6142]: Memcap: 100000 KBMay 24 23:42:14 ubuntu-890-base snort[6142]: Alert if memcap exceeded DISABLEDMay 24 23:42:14 ubuntu-890-base snort[6142]: May 24 23:42:14 ubuntu-890-base snort[6142]: DNS config: May 24 23:42:14 ubuntu-890-base snort[6142]: DNS Client rdata txt Overflow Alert: ACTIVEMay 24 23:42:14 ubuntu-890-base snort[6142]: Obsolete DNS RR Types Alert: INACTIVEMay 24 23:42:14 ubuntu-890-base snort[6142]: Experimental DNS RR Types Alert: INACTIVEMay 24 23:42:14 ubuntu-890-base snort[6142]: Ports:May 24 23:42:14 ubuntu-890-base snort[6142]: 53May 24 23:42:14 ubuntu-890-base snort[6142]: May 24 23:42:14 ubuntu-890-base snort[6142]: Warning: flowbits key 'realplayer.playlist' is checked but not ever set.May 24 23:42:14 ubuntu-890-base snort[6142]: Warning: flowbits key 'community_uri.size.1050' is set but not ever checked.May 24 23:42:14 ubuntu-890-base snort[6142]: Warning: flowbits key 'ms_sql_seen_dns' is checked but not ever set.May 24 23:42:14 ubuntu-890-base snort[6142]: Warning: flowbits key 'smb.tree.create.llsrpc' is set but not ever checked.May 24 23:42:14 ubuntu-890-base snort[6142]: 37 out of 512 flowbits in use.May 24 23:42:14 ubuntu-890-base snort[6142]: OpenPcap() device eth0 network lookup: eth0: no IPv4 address assignedMay 24 23:42:14 ubuntu-890-base snort[6142]: Initializing daemon modeMay 24 23:42:14 ubuntu-890-base snort[6144]: OpenPcap() device eth0 network lookup: eth0: no IPv4 address assignedMay 24 23:42:14 ubuntu-890-base snort[6144]: PID path stat checked out ok, PID path set to /var/run/May 24 23:42:14 ubuntu-890-base snort[6144]: Writing PID "6144" to file "/var/run//snort_eth0.pid"May 24 23:42:14 ubuntu-890-base snort[6144]: Daemon initialized, signaled parent pid: 6142May 24 23:42:14 ubuntu-890-base snort[6142]: Daemon parent exitingMay 24 23:42:16 ubuntu-890-base NetworkManager: <info> eth1: Device is fully-supported using driver 'forcedeth'.May 24 23:42:16 ubuntu-890-base NetworkManager: <info> nm_device_init(): waiting for device's worker thread to startMay 24 23:42:16 ubuntu-890-base NetworkManager: <info> nm_device_init(): device's worker thread started, continuing.May 24 23:42:16 ubuntu-890-base NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth1'.May 24 23:42:16 ubuntu-890-base NetworkManager: <info> Deactivating device eth1.May 24 23:42:16 ubuntu-890-base NetworkManager: <info> eth2: Device is fully-supported using driver '3c59x'.May 24 23:42:16 ubuntu-890-base NetworkManager: <info> nm_device_init(): waiting for device's worker thread to startMay 24 23:42:16 ubuntu-890-base NetworkManager: <info> nm_device_init(): device's worker thread started, continuing.May 24 23:42:16 ubuntu-890-base NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth2'.May 24 23:42:16 ubuntu-890-base NetworkManager: <info> Deactivating device eth2.May 24 23:42:16 ubuntu-890-base NetworkManager: <info> Will activate wired connection 'eth2' because it now has a link.May 24 23:42:16 ubuntu-890-base NetworkManager: <debug> [1243222936.581983] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_model_LTR_52327S').May 24 23:42:16 ubuntu-890-base NetworkManager: <info> SWITCH: no current connection, found better connection 'eth2'.May 24 23:42:16 ubuntu-890-base hcid[6433]: Bluetooth HCI daemonMay 24 23:42:16 ubuntu-890-base hcid[6433]: Starting SDP serverMay 24 23:42:16 ubuntu-890-base hcid[6433]: Created local server at unix:abstract=/var/run/dbus-9DIpXJIl4G,guid=2e571cd5fb3f80858af5ca954a1a1398May 24 23:42:16 ubuntu-890-base input[6471]: Bluetooth Input daemonMay 24 23:42:16 ubuntu-890-base input[6471]: Registered input manager path:/org/bluez/inputMay 24 23:42:16 ubuntu-890-base audio[6483]: Bluetooth Audio daemonMay 24 23:42:16 ubuntu-890-base audio[6483]: Unix socket created: 5May 24 23:42:16 ubuntu-890-base audio[6483]: audio.conf: Key file does not have key 'Enable'May 24 23:42:16 ubuntu-890-base audio[6483]: audio.conf: Key file does not have key 'Disable'May 24 23:42:16 ubuntu-890-base audio[6483]: add_service_record: got record id 0x10000May 24 23:42:16 ubuntu-890-base audio[6483]: audio.conf: Key file does not have key 'Disable'May 24 23:42:16 ubuntu-890-base audio[6483]: audio.conf: Key file does not have group 'A2DP'May 24 23:42:16 ubuntu-890-base audio[6483]: audio.conf: Key file does not have group 'A2DP'May 24 23:42:16 ubuntu-890-base audio[6483]: audio.conf: Key file does not have group 'A2DP'May 24 23:42:16 ubuntu-890-base audio[6483]: audio.conf: Key file does not have group 'A2DP'May 24 23:42:16 ubuntu-890-base audio[6483]: SEP 0x62d390 registered: type:0 codec:0 seid:1May 24 23:42:16 ubuntu-890-base audio[6483]: add_service_record: got record id 0x10001May 24 23:42:16 ubuntu-890-base audio[6483]: add_service_record: got record id 0x10002May 24 23:42:16 ubuntu-890-base audio[6483]: add_service_record: got record id 0x10003May 24 23:42:16 ubuntu-890-base audio[6483]: Registered manager path:/org/bluez/audioMay 24 23:42:16 ubuntu-890-base hal_lpadmin: addMay 24 23:42:16 ubuntu-890-base hal_lpadmin: URIs: ['usb://Lexmark/%206500%20Series', 'hal:///org/freedesktop/Hal/devices/usb_device_43d_10f_16Y068531148173_if1_printer_noserial']May 24 23:42:16 ubuntu-890-base hal_lpadmin: HPLIP Fax URIs: NoneMay 24 23:42:16 ubuntu-890-base hal_lpadmin: Not adding printer: _6500_Series already existsMay 24 23:42:17 ubuntu-890-base NetworkManager: <info> Will activate connection 'eth2'.May 24 23:42:17 ubuntu-890-base NetworkManager: <info> Device eth2 activation scheduled...May 24 23:42:17 ubuntu-890-base NetworkManager: <debug> [1243222937.583512] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth').May 24 23:42:17 ubuntu-890-base NetworkManager: <debug> [1243222937.584320] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_43d_10f_16Y068531148173_if1_printer_noserial').May 24 23:42:17 ubuntu-890-base NetworkManager: <info> Activation (eth2) started...May 24 23:42:17 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 1 of 5 (Device Prepare) scheduled...May 24 23:42:17 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 1 of 5 (Device Prepare) started...May 24 23:42:17 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) scheduled...May 24 23:42:17 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 1 of 5 (Device Prepare) complete.May 24 23:42:17 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) starting...May 24 23:42:17 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) successful.May 24 23:42:17 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 3 of 5 (IP Configure Start) scheduled.May 24 23:42:17 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 2 of 5 (Device Configure) complete.May 24 23:42:17 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 3 of 5 (IP Configure Start) started...May 24 23:42:18 ubuntu-890-base NetworkManager: <info> Activation (eth2) Beginning DHCP transaction.May 24 23:42:18 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 3 of 5 (IP Configure Start) complete.May 24 23:42:18 ubuntu-890-base NetworkManager: <info> DHCP daemon state is now 12 (successfully started) for interface eth2May 24 23:42:19 ubuntu-890-base squid[6573]: Squid Parent: child process 6576 startedMay 24 23:42:19 ubuntu-890-base squid[6576]: Starting Squid Cache version 2.6.STABLE18 for amd64-debian-linux-gnu...May 24 23:42:19 ubuntu-890-base squid[6576]: Process ID 6576May 24 23:42:19 ubuntu-890-base squid[6576]: With 1024 file descriptors availableMay 24 23:42:19 ubuntu-890-base squid[6576]: Using epoll for the IO loopMay 24 23:42:19 ubuntu-890-base squid[6576]: DNS Socket created at 0.0.0.0, port 50595, FD 6May 24 23:42:19 ubuntu-890-base squid[6576]: Adding domain Belkin from /etc/resolv.confMay 24 23:42:19 ubuntu-890-base squid[6576]: Adding nameserver 192.168.2.1 from /etc/resolv.confMay 24 23:42:19 ubuntu-890-base squid[6576]: User-Agent logging is disabled.May 24 23:42:19 ubuntu-890-base squid[6576]: Referer logging is disabled.May 24 23:42:19 ubuntu-890-base squid[6576]: Unlinkd pipe opened on FD 11May 24 23:42:19 ubuntu-890-base squid[6576]: Swap maxSize 102400 KB, estimated 7876 objectsMay 24 23:42:19 ubuntu-890-base squid[6576]: Target number of buckets: 393May 24 23:42:19 ubuntu-890-base squid[6576]: Using 8192 Store bucketsMay 24 23:42:19 ubuntu-890-base squid[6576]: Max Mem size: 8192 KBMay 24 23:42:19 ubuntu-890-base squid[6576]: Max Swap size: 102400 KBMay 24 23:42:19 ubuntu-890-base squid[6576]: Local cache digest enabled; rebuild/rewrite every 3600/3600 secMay 24 23:42:19 ubuntu-890-base arpwatch: Running as uid=124 gid=138May 24 23:42:19 ubuntu-890-base arpwatch: listening on eth0May 24 23:42:19 ubuntu-890-base NetworkManager: <info> DHCP daemon state is now 1 (starting) for interface eth2May 24 23:42:19 ubuntu-890-base squid[6576]: Rebuilding storage in /var/spool/squid (CLEAN)May 24 23:42:19 ubuntu-890-base squid[6576]: Using Least Load store dir selectionMay 24 23:42:19 ubuntu-890-base squid[6576]: Set Current Directory to /var/spool/squidMay 24 23:42:19 ubuntu-890-base squid[6576]: Loaded Icons.May 24 23:42:19 ubuntu-890-base squid[6576]: Accepting proxy HTTP connections at 0.0.0.0, port 3128, FD 13.May 24 23:42:19 ubuntu-890-base squid[6576]: Accepting ICP messages at 0.0.0.0, port 3130, FD 14.May 24 23:42:19 ubuntu-890-base squid[6576]: HTCP Disabled.May 24 23:42:19 ubuntu-890-base squid[6576]: WCCP Disabled.May 24 23:42:19 ubuntu-890-base squid[6576]: Ready to serve requests.May 24 23:42:19 ubuntu-890-base squid[6576]: Done reading /var/spool/squid swaplog (0 entries)May 24 23:42:19 ubuntu-890-base squid[6576]: Finished rebuilding storage from disk.May 24 23:42:19 ubuntu-890-base squid[6576]: 0 Entries scannedMay 24 23:42:19 ubuntu-890-base squid[6576]: 0 Invalid entries.May 24 23:42:19 ubuntu-890-base squid[6576]: 0 With invalid flags.May 24 23:42:19 ubuntu-890-base squid[6576]: 0 Objects loaded.May 24 23:42:19 ubuntu-890-base squid[6576]: 0 Objects expired.May 24 23:42:19 ubuntu-890-base squid[6576]: 0 Objects cancelled.May 24 23:42:19 ubuntu-890-base squid[6576]: 0 Duplicate URLs purged.May 24 23:42:19 ubuntu-890-base squid[6576]: 0 Swapfile clashes avoided.May 24 23:42:19 ubuntu-890-base squid[6576]: Took 0.6 seconds ( 0.0 objects/sec).May 24 23:42:19 ubuntu-890-base squid[6576]: Beginning Validation ProcedureMay 24 23:42:19 ubuntu-890-base squid[6576]: Completed Validation ProcedureMay 24 23:42:19 ubuntu-890-base squid[6576]: Validated 0 EntriesMay 24 23:42:19 ubuntu-890-base squid[6576]: store_swap_size = 0kMay 24 23:42:19 ubuntu-890-base lircd-0.8.3pre1[6625]: garbage after 'name' token in line 335 ignoredMay 24 23:42:19 ubuntu-890-base lircd-0.8.3pre1[6626]: lircd(userspace) readyMay 24 23:42:20 ubuntu-890-base squid[6576]: storeLateRelease: released 0 objectsMay 24 23:42:20 ubuntu-890-base snort[6144]: Preprocessor/Decoder Rule Count: 0May 24 23:42:20 ubuntu-890-base snort[6144]: Snort initialization completed successfully (pid=6144)May 24 23:42:20 ubuntu-890-base snort[6144]: Not Using PCAP_FRAMESMay 24 23:42:21 ubuntu-890-base dhclient: DHCPREQUEST of 192.168.2.3 on eth2 to 255.255.255.255 port 67May 24 23:42:21 ubuntu-890-base dhclient: DHCPACK of 192.168.2.3 from 192.168.2.1May 25 03:42:21 ubuntu-890-base avahi-daemon[5617]: Joining mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 25 03:42:21 ubuntu-890-base avahi-daemon[5617]: New relevant interface eth2.IPv4 for mDNS.May 25 03:42:21 ubuntu-890-base avahi-daemon[5617]: Registering new address record for 192.168.2.3 on eth2.IPv4.May 24 23:42:21 ubuntu-890-base NetworkManager: <info> DHCP daemon state is now 4 (reboot) for interface eth2May 24 23:42:21 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 4 of 5 (IP Configure Get) scheduled...May 24 23:42:21 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 4 of 5 (IP Configure Get) started...May 24 23:42:21 ubuntu-890-base dhclient: bound to 192.168.2.3 -- renewal in 2147483648 seconds.May 24 23:42:22 ubuntu-890-base NetworkManager: <info> Retrieved the following IP4 configuration from the DHCP daemon:May 24 23:42:22 ubuntu-890-base NetworkManager: <info> address 192.168.2.3May 24 23:42:22 ubuntu-890-base NetworkManager: <info> netmask 255.255.255.0May 24 23:42:22 ubuntu-890-base NetworkManager: <info> broadcast 192.168.2.255May 24 23:42:22 ubuntu-890-base NetworkManager: <info> gateway 192.168.2.1May 24 23:42:22 ubuntu-890-base NetworkManager: <info> nameserver 192.168.2.1May 24 23:42:22 ubuntu-890-base NetworkManager: <info> domain name 'Belkin'May 24 23:42:22 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 5 of 5 (IP Configure Commit) scheduled...May 24 23:42:22 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 4 of 5 (IP Configure Get) complete.May 24 23:42:22 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 5 of 5 (IP Configure Commit) started...May 25 03:42:22 ubuntu-890-base avahi-daemon[5617]: Withdrawing address record for 192.168.2.3 on eth2.May 25 03:42:22 ubuntu-890-base avahi-daemon[5617]: Leaving mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 25 03:42:22 ubuntu-890-base avahi-daemon[5617]: Interface eth2.IPv4 no longer relevant for mDNS.May 25 03:42:22 ubuntu-890-base avahi-daemon[5617]: Joining mDNS multicast group on interface eth2.IPv4 with address 192.168.2.3.May 25 03:42:22 ubuntu-890-base avahi-daemon[5617]: New relevant interface eth2.IPv4 for mDNS.May 25 03:42:22 ubuntu-890-base avahi-daemon[5617]: Registering new address record for 192.168.2.3 on eth2.IPv4.May 24 23:42:23 ubuntu-890-base NetworkManager: <info> Clearing nscd hosts cache.May 24 23:42:23 ubuntu-890-base NetworkManager: <WARN> nm_spawn_process(): nm_spawn_process('/usr/sbin/nscd -i hosts'): could not spawn process. (Failed to execute child process "/usr/sbin/nscd" (No such file or directory))May 24 23:42:23 ubuntu-890-base NetworkManager: <info> Activation (eth2) successful, device activated.May 24 23:42:23 ubuntu-890-base NetworkManager: <info> Activation (eth2) Finish handler scheduled.May 24 23:42:23 ubuntu-890-base NetworkManager: <info> Activation (eth2) Stage 5 of 5 (IP Configure Commit) complete.May 24 23:42:24 ubuntu-890-base ntpdate[6988]: adjust time server 91.189.94.4 offset -0.123825 secMay 25 03:42:24 ubuntu-890-base avahi-daemon[5617]: Registering new address record for fe80::204:76ff:feec:c7d6 on eth2.*.May 24 23:42:26 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11May 24 23:42:37 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14May 24 23:42:51 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4May 24 23:42:51 ubuntu-890-base hcid[6433]: Default passkey agent (:1.22, /org/bluez/passkey) registeredMay 24 23:42:51 ubuntu-890-base hcid[6433]: Default authorization agent (:1.22, /org/bluez/auth) registeredMay 24 23:42:55 ubuntu-890-base dhclient: No DHCPOFFERS received.May 24 23:42:55 ubuntu-890-base dhclient: No working leases in persistent database - sleeping.May 24 23:42:55 ubuntu-890-base avahi-autoipd(eth0)[7244]: Found user 'avahi-autoipd' (UID 111) and group 'avahi-autoipd' (GID 122).May 24 23:42:55 ubuntu-890-base avahi-autoipd(eth0)[7244]: Successfully called chroot().May 25 03:42:55 ubuntu-890-base avahi-autoipd(eth0)[7244]: Successfully dropped root privileges.May 25 03:42:55 ubuntu-890-base avahi-autoipd(eth0)[7244]: Starting with address 169.254.7.93May 24 23:42:58 ubuntu-890-base NetworkManager: <info> Updating allowed wireless network lists.May 24 23:42:58 ubuntu-890-base NetworkManager: <WARN> nm_dbus_get_networks_cb(): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored..May 25 03:43:00 ubuntu-890-base avahi-autoipd(eth0)[7244]: Callout BIND, address 169.254.7.93 on interface eth0May 25 03:43:01 ubuntu-890-base avahi-daemon[5617]: Joining mDNS multicast group on interface eth0.IPv4 with address 169.254.7.93.May 25 03:43:01 ubuntu-890-base avahi-daemon[5617]: New relevant interface eth0.IPv4 for mDNS.May 25 03:43:01 ubuntu-890-base avahi-daemon[5617]: Registering new address record for 169.254.7.93 on eth0.IPv4.May 25 03:43:04 ubuntu-890-base avahi-autoipd(eth0)[7244]: Successfully claimed IP address 169.254.7.93May 24 23:43:07 ubuntu-890-base ntpdate[7327]: adjust time server 91.189.94.4 offset -0.104589 secMay 24 23:46:44 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8May 24 23:46:52 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8May 24 23:47:00 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9May 24 23:47:09 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11May 24 23:47:20 ubuntu-890-base dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8xorgLog:This is a pre-release version of the X server from The X.Org Foundation.It is not supported in any way.Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.Select the "xorg" product for bugs you find in this release.Before reporting bugs in pre-release versions please check thelatest version in the X.Org Foundation git repository.See http://wiki.x.org/wiki/GitPage for git access instructions.X.Org X Server 1.4.0.90Release Date: 5 September 2007X Protocol Version 11, Revision 0Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9.2)Current Operating System: Linux ubuntu-890-base 2.6.24-24-server #1 SMP Wed Apr 15 15:41:09 UTC 2009 x86_64Build Date: 13 June 2008 01:10:57AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version.Module Loader presentMarkers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown.(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 24 23:42:18 2009(==) Using config file: "/etc/X11/xorg.conf"(==) ServerLayout "Default Layout"(**) |-->Screen "Default Screen" (0)(**) | |-->Monitor "Configured Monitor"(**) | |-->Device "Configured Video Device"(==) Automatically adding devices(==) Automatically enabling devices(==) No FontPath specified. Using compiled-in default.(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path.(==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType(==) RgbPath set to "/etc/X11/rgb"(==) ModulePath set to "/usr/lib/xorg/modules"(==) |-->Input Device "Configured Mouse"(==) |-->Input Device "Generic Keyboard"(==) The core pointer device wasn't specified explicitly in the layout. Using the first core pointer device.(==) The core keyboard device wasn't specified explicitly in the layout. Using the first keyboard device.(II) Open ACPI successful (/var/run/acpid.socket)(II) Loader magic: 0x7bd660(II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5(II) Loader running on linux(II) LoadModule: "pcidata"(II) Loading /usr/lib/xorg/modules//libpcidata.so(II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0(++) using VT number 7(II) PCI: PCI scan (all values are in hex)(II) PCI: 00:00:0: chip 10de,0369 card 1043,8239 rev a1 class 05,00,00 hdr 00(II) PCI: 00:01:0: chip 10de,0360 card 1043,8239 rev a2 class 06,01,00 hdr 80(II) PCI: 00:01:1: chip 10de,0368 card 1043,8239 rev a2 class 0c,05,00 hdr 80(II) PCI: 00:01:2: chip 10de,036a card 1043,8239 rev a2 class 05,00,00 hdr 80(II) PCI: 00:02:0: chip 10de,036c card 1043,8239 rev a1 class 0c,03,10 hdr 80(II) PCI: 00:02:1: chip 10de,036d card 1043,8239 rev a2 class 0c,03,20 hdr 80(II) PCI: 00:04:0: chip 10de,036e card f043,8239 rev a1 class 01,01,8a hdr 00(II) PCI: 00:05:0: chip 10de,037f card 1043,8239 rev a2 class 01,01,85 hdr 80(II) PCI: 00:05:1: chip 10de,037f card 1043,8239 rev a2 class 01,01,85 hdr 80(II) PCI: 00:05:2: chip 10de,037f card 1043,8239 rev a2 class 01,01,85 hdr 80(II) PCI: 00:06:0: chip 10de,0370 card 0000,0000 rev a2 class 06,04,01 hdr 81(II) PCI: 00:06:1: chip 10de,0371 card 1043,81f6 rev a2 class 04,03,00 hdr 80(II) PCI: 00:08:0: chip 10de,0373 card 1043,8239 rev a2 class 06,80,00 hdr 00(II) PCI: 00:09:0: chip 10de,0373 card 1043,8239 rev a2 class 06,80,00 hdr 00(II) PCI: 00:0a:0: chip 10de,0376 card 0000,0000 rev a2 class 06,04,00 hdr 01(II) PCI: 00:0b:0: chip 10de,0374 card 0000,0000 rev a2 class 06,04,00 hdr 01(II) PCI: 00:0c:0: chip 10de,0374 card 0000,0000 rev a2 class 06,04,00 hdr 01(II) PCI: 00:0d:0: chip 10de,0378 card 0000,0000 rev a2 class 06,04,00 hdr 01(II) PCI: 00:0e:0: chip 10de,0375 card 0000,0000 rev a2 class 06,04,00 hdr 01(II) PCI: 00:0f:0: chip 10de,0377 card 0000,0000 rev a2 class 06,04,00 hdr 01(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80(II) PCI: 01:06:0: chip 1039,6326 card 0000,0000 rev 0b class 03,00,00 hdr 00(II) PCI: 01:07:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00(II) PCI: 01:0b:0: chip 104c,8023 card 1043,808b rev 00 class 0c,00,10 hdr 00(II) PCI: 06:00:0: chip 197b,2363 card 1043,81e4 rev 02 class 01,06,01 hdr 80(II) PCI: 06:00:1: chip 197b,2363 card 1043,81e4 rev 02 class 01,01,85 hdr 00(II) PCI: 07:00:0: chip 10de,0392 card 3842,c549 rev a1 class 03,00,00 hdr 00(II) PCI: End of PCI scan(II) PCI-to-ISA bridge:(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)(II) Subtractive PCI-to-PCI bridge:(II) Bus 1: bridge is at (0:6:0), (0,1,1), BCTRL: 0x0a04 (VGA_EN is cleared)(II) Bus 1 I/O range: [0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B] [1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B] [2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B] [3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B](II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[B](II) Bus 1 prefetchable memory range: [0] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](II) PCI-to-PCI bridge:(II) Bus 2: bridge is at (0:10:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)(II) PCI-to-PCI bridge:(II) Bus 3: bridge is at (0:11:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)(II) PCI-to-PCI bridge:(II) Bus 4: bridge is at (0:12:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)(II) PCI-to-PCI bridge:(II) Bus 5: bridge is at (0:13:0), (0,5,5), BCTRL: 0x0004 (VGA_EN is cleared)(II) PCI-to-PCI bridge:(II) Bus 6: bridge is at (0:14:0), (0,6,6), BCTRL: 0x0004 (VGA_EN is cleared)(II) Bus 6 I/O range: [0] -1 0 0x00007000 - 0x000070ff (0x100) IX[B] [1] -1 0 0x00007400 - 0x000074ff (0x100) IX[B] [2] -1 0 0x00007800 - 0x000078ff (0x100) IX[B] [3] -1 0 0x00007c00 - 0x00007cff (0x100) IX[B] [4] -1 0 0x00008000 - 0x000080ff (0x100) IX[B] [5] -1 0 0x00008400 - 0x000084ff (0x100) IX[B] [6] -1 0 0x00008800 - 0x000088ff (0x100) IX[B] [7] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B](II) Bus 6 non-prefetchable memory range: [0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX[B](II) PCI-to-PCI bridge:(II) Bus 7: bridge is at (0:15:0), (0,7,7), BCTRL: 0x001c (VGA_EN is set)(II) Bus 7 I/O range: [0] -1 0 0x00006000 - 0x000060ff (0x100) IX[B] [1] -1 0 0x00006400 - 0x000064ff (0x100) IX[B] [2] -1 0 0x00006800 - 0x000068ff (0x100) IX[B] [3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[B](II) Bus 7 non-prefetchable memory range: [0] -1 0 0xfa000000 - 0xfcffffff (0x3000000) MX[B](II) Bus 7 prefetchable memory range: [0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](II) Host-to-PCI bridge:(II) Bus 0: bridge is at (0:24:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)(II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B](II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B](II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B](--) PCI: (1:6:0) Silicon Integrated Systems [SiS] 86C326 5598/6326 rev 11, Mem @ 0xfd000000/23, 0xfdee0000/16, I/O @ 0x9c00/7(--) PCI:*(7:0:0) nVidia Corporation G70 [GeForce 7600 GS] rev 161, Mem @ 0xfa000000/24, 0xe0000000/28, 0xfb000000/24, I/O @ 0x6c00/7, BIOS @ 0xfcfe0000/17(II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B](II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B](II) Active PCI resource ranges: [0] -1 0 0xfddfe000 - 0xfddfffff (0x2000) MX[B] [1] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[B] [2] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[B] [3] -1 0 0xfdeff000 - 0xfdeff07f (0x80) MX[B] [4] -1 0 0xfe025000 - 0xfe02500f (0x10) MX[B] [5] -1 0 0xfe026000 - 0xfe0260ff (0x100) MX[B] [6] -1 0 0xfe027000 - 0xfe027fff (0x1000) MX[B] [7] -1 0 0xfe028000 - 0xfe02800f (0x10) MX[B] [8] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B] [9] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [10] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[B] [11] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [12] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [13] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [14] -1 0 0xfe02e000 - 0xfe02e0ff (0x100) MX[B] [15] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [16] -1 0 0xfcfe0000 - 0xfcffffff (0x20000) MX[B](B) [17] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [18] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [19] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [20] -1 0 0x00007c00 - 0x00007c0f (0x10) IX[B] [21] -1 0 0x00008000 - 0x00008003 (0x4) IX[B] [22] -1 0 0x00008400 - 0x00008407 (0x8) IX[B] [23] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [24] -1 0 0x00008c00 - 0x00008c07 (0x8) IX[B] [25] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] [26] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B] [27] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [28] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B] [29] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B] [30] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [31] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[B] [32] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B] [33] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [34] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [35] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [36] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [37] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [38] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B] [39] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [40] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [41] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [42] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [43] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [44] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [45] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [46] -1 0 0x0000fc00 - 0x0000fc3f (0x40) IX[B] [47] -1 0 0x00006c00 - 0x00006c7f (0x80) IX[B](B)(II) Inactive PCI resource ranges: [0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[B](B) [1] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [2] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[B](B)(II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfddfe000 - 0xfddfffff (0x2000) MX[B] [1] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[B] [2] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[B] [3] -1 0 0xfdeff000 - 0xfdeff07f (0x80) MX[B] [4] -1 0 0xfe025000 - 0xfe02500f (0x10) MX[B] [5] -1 0 0xfe026000 - 0xfe0260ff (0x100) MX[B] [6] -1 0 0xfe027000 - 0xfe027fff (0x1000) MX[B] [7] -1 0 0xfe028000 - 0xfe02800f (0x10) MX[B] [8] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B] [9] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [10] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[B] [11] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [12] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [13] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [14] -1 0 0xfe02e000 - 0xfe02e0ff (0x100) MX[B] [15] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [16] -1 0 0xfcfe0000 - 0xfcffffff (0x20000) MX[B](B) [17] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [18] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [19] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [20] -1 0 0x00007c00 - 0x00007c0f (0x10) IX[B] [21] -1 0 0x00008000 - 0x00008003 (0x4) IX[B] [22] -1 0 0x00008400 - 0x00008407 (0x8) IX[B] [23] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [24] -1 0 0x00008c00 - 0x00008c07 (0x8) IX[B] [25] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] [26] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B] [27] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [28] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B] [29] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B] [30] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [31] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[B] [32] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B] [33] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [34] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [35] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [36] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [37] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [38] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B] [39] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [40] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [41] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [42] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [43] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [44] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [45] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [46] -1 0 0x0000fc00 - 0x0000fc3f (0x40) IX[B] [47] -1 0 0x00006c00 - 0x00006c7f (0x80) IX[B](B)(II) Inactive PCI resource ranges after removing overlaps: [0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[B](B) [1] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [2] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[B](B)(II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B](II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfddfe000 - 0xfddfffff (0x2000) MX[B] [5] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[B] [6] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[B] [7] -1 0 0xfdeff000 - 0xfdeff07f (0x80) MX[B] [8] -1 0 0xfe025000 - 0xfe02500f (0x10) MX[B] [9] -1 0 0xfe026000 - 0xfe0260ff (0x100) MX[B] [10] -1 0 0xfe027000 - 0xfe027fff (0x1000) MX[B] [11] -1 0 0xfe028000 - 0xfe02800f (0x10) MX[B] [12] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B] [13] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [14] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[B] [15] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [16] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [17] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [18] -1 0 0xfe02e000 - 0xfe02e0ff (0x100) MX[B] [19] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [20] -1 0 0xfcfe0000 - 0xfcffffff (0x20000) MX[B](B) [21] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [22] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [23] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [24] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[B](B) [25] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [27] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [28] -1 0 0x00007c00 - 0x00007c0f (0x10) IX[B] [29] -1 0 0x00008000 - 0x00008003 (0x4) IX[B] [30] -1 0 0x00008400 - 0x00008407 (0x8) IX[B] [31] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [32] -1 0 0x00008c00 - 0x00008c07 (0x8) IX[B] [33] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] [34] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B] [35] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [36] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B] [37] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B] [38] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [39] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[B] [40] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B] [41] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [42] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [43] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [44] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [45] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [46] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B] [47] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [48] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [49] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [50] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [51] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [52] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [53] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [54] -1 0 0x0000fc00 - 0x0000fc3f (0x40) IX[B] [55] -1 0 0x00006c00 - 0x00006c7f (0x80) IX[B](B) [56] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[B](B)(II) LoadModule: "extmod"(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so(II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3(II) Loading extension SHAPE(II) Loading extension MIT-SUNDRY-NONSTANDARD(II) Loading extension BIG-REQUESTS(II) Loading extension SYNC(II) Loading extension MIT-SCREEN-SAVER(II) Loading extension XC-MISC(II) Loading extension XFree86-VidModeExtension(II) Loading extension XFree86-Misc(II) Loading extension XFree86-DGA(II) Loading extension DPMS(II) Loading extension TOG-CUP(II) Loading extension Extended-Visual-Information(II) Loading extension XVideo(II) Loading extension XVideo-MotionCompensation(II) Loading extension X-Resource(II) LoadModule: "dbe"(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so(II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3(II) Loading extension DOUBLE-BUFFER(II) LoadModule: "glx"(II) Loading /usr/lib/xorg/modules/extensions//libglx.so(II) Module glx: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3(==) AIGLX enabled(II) Loading extension GLX(II) LoadModule: "freetype"(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.0.90, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5(II) Loading font FreeType(II) LoadModule: "record"(II) Loading /usr/lib/xorg/modules/extensions//librecord.so(II) Module record: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3(II) Loading extension RECORD(II) LoadModule: "dri"(II) Loading /usr/lib/xorg/modules/extensions//libdri.so(II) Module dri: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3(II) Loading extension XFree86-DRI(II) Matched nv from file name nv.ids in autoconfig(==) Matched nv for the autoconfigured driver(==) Assigned the driver to the xf86ConfigLayout(II) LoadModule: "nv"(II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so(II) Module nv: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 2.1.8 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0(II) LoadModule: "mouse"(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so(II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.2.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0(II) LoadModule: "kbd"(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so(II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2, Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go, GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420, GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go, GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL, GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL, GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X, GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL, Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL, Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X, GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL, Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra, GeForce FX 5800, Quadro FX 2000, Quadro FX 1000, GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT, GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700, GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M, Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra, GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra, GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700, GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700, Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800, GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT, GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000, GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT, GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400, Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT, GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600, GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL, GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500, GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM), GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400, GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX, GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800, GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT, GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS, GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT, GeForce 8600 GT, GeForce 8400 GS, GeForce 8600M GT, GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M, Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M, Quadro FX 360M, Quadro NVS 290, GeForce 8800 GT, GeForce 8800 GS, GeForce 8800 GS, GeForce 8800 GT, Quadro FX 3700, GeForce 9600 GT, GeForce 8400 GS(II) Primary Device is: PCI 07:00:0(--) Assigning device section with no busID to primary device(--) Chipset GeForce 7600 GS found(II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfddfe000 - 0xfddfffff (0x2000) MX[B] [5] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[B] [6] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[B] [7] -1 0 0xfdeff000 - 0xfdeff07f (0x80) MX[B] [8] -1 0 0xfe025000 - 0xfe02500f (0x10) MX[B] [9] -1 0 0xfe026000 - 0xfe0260ff (0x100) MX[B] [10] -1 0 0xfe027000 - 0xfe027fff (0x1000) MX[B] [11] -1 0 0xfe028000 - 0xfe02800f (0x10) MX[B] [12] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B] [13] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [14] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[B] [15] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [16] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [17] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [18] -1 0 0xfe02e000 - 0xfe02e0ff (0x100) MX[B] [19] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [20] -1 0 0xfcfe0000 - 0xfcffffff (0x20000) MX[B](B) [21] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [22] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [23] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [24] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[B](B) [25] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [27] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [28] -1 0 0x00007c00 - 0x00007c0f (0x10) IX[B] [29] -1 0 0x00008000 - 0x00008003 (0x4) IX[B] [30] -1 0 0x00008400 - 0x00008407 (0x8) IX[B] [31] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [32] -1 0 0x00008c00 - 0x00008c07 (0x8) IX[B] [33] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] [34] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B] [35] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [36] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B] [37] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B] [38] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [39] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[B] [40] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B] [41] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [42] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [43] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [44] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [45] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [46] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B] [47] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [48] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [49] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [50] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [51] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [52] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [53] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [54] -1 0 0x0000fc00 - 0x0000fc3f (0x40) IX[B] [55] -1 0 0x00006c00 - 0x00006c7f (0x80) IX[B](B) [56] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[B](B)(II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfddfe000 - 0xfddfffff (0x2000) MX[B] [5] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[B] [6] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[B] [7] -1 0 0xfdeff000 - 0xfdeff07f (0x80) MX[B] [8] -1 0 0xfe025000 - 0xfe02500f (0x10) MX[B] [9] -1 0 0xfe026000 - 0xfe0260ff (0x100) MX[B] [10] -1 0 0xfe027000 - 0xfe027fff (0x1000) MX[B] [11] -1 0 0xfe028000 - 0xfe02800f (0x10) MX[B] [12] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B] [13] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [14] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[B] [15] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [16] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [17] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [18] -1 0 0xfe02e000 - 0xfe02e0ff (0x100) MX[B] [19] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [20] -1 0 0xfcfe0000 - 0xfcffffff (0x20000) MX[B](B) [21] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [22] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [23] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [24] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[B](B) [25] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [26] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [27] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [28] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [30] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [31] -1 0 0x00007c00 - 0x00007c0f (0x10) IX[B] [32] -1 0 0x00008000 - 0x00008003 (0x4) IX[B] [33] -1 0 0x00008400 - 0x00008407 (0x8) IX[B] [34] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [35] -1 0 0x00008c00 - 0x00008c07 (0x8) IX[B] [36] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] [37] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B] [38] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [39] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B] [40] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B] [41] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [42] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[B] [43] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B] [44] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [45] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [46] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [47] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [48] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [49] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B] [50] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [51] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [52] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [53] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [54] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [55] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [56] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [57] -1 0 0x0000fc00 - 0x0000fc3f (0x40) IX[B] [58] -1 0 0x00006c00 - 0x00006c7f (0x80) IX[B](B) [59] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[B](B) [60] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [61] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](II) Setting vga for screen 0.(II) Loading sub module "int10"(II) LoadModule: "int10"(II) Loading /usr/lib/xorg/modules//libint10.so(II) Module int10: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0(II) NV(0): Initializing int10(II) NV(0): Primary V_BIOS segment is: 0xc000(--) NV(0): Chipset: "GeForce 7600 GS"(II) NV(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32(==) NV(0): Depth 24, (==) framebuffer bpp 32(==) NV(0): RGB weight 888(==) NV(0): Default visual is TrueColor(II) Loading sub module "vgahw"(II) LoadModule: "vgahw"(II) Loading /usr/lib/xorg/modules//libvgahw.so(II) Module vgahw: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 0.1.0 ABI class: X.Org Video Driver, version 2.0(==) NV(0): Using HW cursor(--) NV(0): Linear framebuffer at 0xE0000000(--) NV(0): MMIO registers at 0xFA000000(II) Loading sub module "i2c"(II) LoadModule: "i2c"(II) Module "i2c" already built-in(II) Loading sub module "ddc"(II) LoadModule: "ddc"(II) Module "ddc" already built-in(II) NV(0): I2C bus "DDC" initialized.(II) NV(0): Probing for analog device on output A...(--) NV(0): ...can't find one(II) NV(0): Probing for analog device on output B...(--) NV(0): ...can't find one(II) NV(0): Probing for EDID on I2C bus A...(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.(II) NV(0): I2C device "DDC:ddc2" removed.(II) NV(0): ... none found(II) NV(0): Probing for EDID on I2C bus B...(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.(--) NV(0): DDC detected a DFP:(II) NV(0): Manufacturer: ACR Model: ad86 Serial#: 1687158834(II) NV(0): Year: 2006 Week: 49(II) NV(0): EDID Version: 1.3(II) NV(0): Digital Display Input(II) NV(0): Max H-Image Size [cm]: horiz.: 40 vert.: 25(II) NV(0): Gamma: 2.07(II) NV(0): DPMS capabilities: Off; RGB/Color Display(II) NV(0): First detailed timing is preferred mode(II) NV(0): redX: 0.634 redY: 0.354 greenX: 0.286 greenY: 0.620(II) NV(0): blueX: 0.138 blueY: 0.076 whiteX: 0.312 whiteY: 0.328(II) NV(0): Supported VESA Video Modes:(II) NV(0): 720x400@70Hz(II) NV(0): 640x480@60Hz(II) NV(0): 640x480@67Hz(II) NV(0): 640x480@72Hz(II) NV(0): 640x480@75Hz(II) NV(0): 800x600@56Hz(II) NV(0): 800x600@60Hz(II) NV(0): 800x600@72Hz(II) NV(0): 800x600@75Hz(II) NV(0): 832x624@75Hz(II) NV(0): 1024x768@60Hz(II) NV(0): 1024x768@70Hz(II) NV(0): 1024x768@75Hz(II) NV(0): 1280x1024@75Hz(II) NV(0): Manufacturer's mask: 0(II) NV(0): Supported Future Video Modes:(II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737(II) NV(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897(II) NV(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149(II) NV(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989(II) NV(0): Supported additional Video Mode:(II) NV(0): clock: 106.5 MHz Image Size: 408 x 255 mm(II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0(II) NV(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0(II) NV(0): L86080584211(II) NV(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz(II) NV(0): Monitor name: Acer AL1916W(II) NV(0): EDID (in hex):(II) NV(0): 00ffffffffffff00047286ad32009064(II) NV(0): 311001038028196b2a6760a25a499e23(II) NV(0): 135054bfef00818f81809500950f0101(II) NV(0): 0101010101019a29a0d0518422305098(II) NV(0): 360098ff1000001c000000fe004c3836(II) NV(0): 3038303538343231310a000000fd0037(II) NV(0): 4b1e530e000a202020202020000000fc(II) NV(0): 004163657220414c31393136570a0030(--) NV(0): CRTC 0 is currently programmed for DFP(II) NV(0): Using DFP on CRTC 0(--) NV(0): Panel size is 1440 x 900(II) NV(0): EDID vendor "ACR", prod id 44422(II) NV(0): Using EDID range info for horizontal sync(II) NV(0): Using EDID range info for vertical refresh(II) NV(0): Printing DDC gathered Modelines:(II) NV(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)(II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)(II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)(II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)(II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)(II) NV(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)(II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)(II) NV(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)(II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)(II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)(II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)(II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)(II) NV(0): Modeline "1280x1024"x74.9 138.75 1280 1368 1504 1728 1024 1027 1034 1072 -hsync +vsync (80.3 kHz)(II) NV(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)(II) NV(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)(II) NV(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)(II) NV(0): Panel is TMDS(--) NV(0): VideoRAM: 262144 kBytes(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)(II) NV(0): Configured Monitor: Using hsync range of 30.00-83.00 kHz(II) NV(0): Configured Monitor: Using vrefresh range of 55.00-75.00 Hz(II) NV(0): Configured Monitor: Using maximum pixel clock of 140.00 MHz(II) NV(0): Estimated virtual size for aspect ratio 1.6000 is 1440x900(II) NV(0): Clock range: 12.00 to 400.00 MHz(II) NV(0): Not using default mode "640x350" (vrefresh out of range)(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "640x400" (vrefresh out of range)(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "720x400" (vrefresh out of range)(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "640x480" (vrefresh out of range)(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "800x600" (vrefresh out of range)(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1280x960" (height too large for virtual size)(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1280x960" (height too large for virtual size)(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1280x1024" (height too large for virtual size)(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1280x1024" (height too large for virtual size)(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1280x1024" (height too large for virtual size)(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1400x1050" (height too large for virtual size)(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1400x1050" (height too large for virtual size)(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1400x1050" (height too large for virtual size)(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1400x1050" (height too large for virtual size)(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1600x1024" (width too large for virtual size)(II) NV(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1680x1050" (width too large for virtual size)(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1920x1200" (width too large for virtual size)(II) NV(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1920x1200" (width too large for virtual size)(II) NV(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)(II) NV(0): Not using driver mode "1280x1024" (height too large for virtual size)(II) NV(0): Not using driver mode "1280x1024" (height too large for virtual size)(II) NV(0): Not using driver mode "1280x1024" (height too large for virtual size)(--) NV(0): Virtual size is 1440x900 (pitch 1440)(**) NV(0): *Driver mode "1440x900": 106.5 MHz, 55.9 kHz, 59.9 Hz(II) NV(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)(**) NV(0): *Driver mode "1440x900": 136.8 MHz, 70.6 kHz, 75.0 Hz(II) NV(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)(**) NV(0): *Driver mode "1440x900": 88.8 MHz, 55.5 kHz, 59.9 Hz(II) NV(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)(**) NV(0): *Driver mode "1440x900": 106.5 MHz, 55.9 kHz, 59.9 Hz(II) NV(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)(**) NV(0): *Default mode "1440x900": 108.8 MHz, 56.9 kHz, 60.2 Hz(II) NV(0): Modeline "1440x900"x60.2 108.84 1440 1472 1880 1912 900 918 927 946 +hsync +vsync (56.9 kHz)(**) NV(0): *Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz(II) NV(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 (49.7 kHz)(**) NV(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz(II) NV(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)(**) NV(0): *Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz(II) NV(0): Modeline "1280x768"x60.0 80.14 1280 1344 1480 1680 768 769 772 795 (47.7 kHz)(**) NV(0): *Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz(II) NV(0): Modeline "1152x768"x54.8 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync (44.2 kHz)(**) NV(0): *Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz(II) NV(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)(**) NV(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz(II) NV(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)(**) NV(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz(II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(**) NV(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz(II) NV(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)(**) NV(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz(II) NV(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)(**) NV(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz(II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(**) NV(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz(II) NV(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)(**) NV(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz(II) NV(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)(**) NV(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz(II) NV(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)(**) NV(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz(II) NV(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)(**) NV(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz(II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(**) NV(0): *Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz(II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)(**) NV(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz(II) NV(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)(**) NV(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz(II) NV(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)(**) NV(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz(II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(**) NV(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz(II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)(**) NV(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz(II) NV(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)(**) NV(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz(II) NV(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)(**) NV(0): *Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz(II) NV(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)(**) NV(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz(II) NV(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(**) NV(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz(II) NV(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)(**) NV(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz(II) NV(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)(**) NV(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz(II) NV(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(**) NV(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz(II) NV(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)(**) NV(0): Display dimensions: (400, 250) mm(**) NV(0): DPI set to (91, 91)(II) Loading sub module "fb"(II) LoadModule: "fb"(II) Loading /usr/lib/xorg/modules//libfb.so(II) Module fb: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3(II) Loading sub module "xaa"(II) LoadModule: "xaa"(II) Loading /usr/lib/xorg/modules//libxaa.so(II) Module xaa: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.2.0 ABI class: X.Org Video Driver, version 2.0(II) Loading sub module "ramdac"(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in(--) Depth 24 pixmap format is 32 bpp(II) do I need RAC? No, I don't.(II) resource ranges after preInit: [0] 0 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B] [1] 0 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] [2] 0 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B] [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xfddfe000 - 0xfddfffff (0x2000) MX[B] [8] -1 0 0xfdef8000 - 0xfdefbfff (0x4000) MX[B] [9] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[B] [10] -1 0 0xfdeff000 - 0xfdeff07f (0x80) MX[B] [11] -1 0 0xfe025000 - 0xfe02500f (0x10) MX[B] [12] -1 0 0xfe026000 - 0xfe0260ff (0x100) MX[B] [13] -1 0 0xfe027000 - 0xfe027fff (0x1000) MX[B] [14] -1 0 0xfe028000 - 0xfe02800f (0x10) MX[B] [15] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B] [16] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [17] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[B] [18] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [19] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [20] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [21] -1 0 0xfe02e000 - 0xfe02e0ff (0x100) MX[B] [22] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [23] -1 0 0xfcfe0000 - 0xfcffffff (0x20000) MX[B](B) [24] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [25] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B) [26] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [27] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[B](B) [28] -1 0 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B) [29] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [30] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [31] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [32] 0 0 0x00006c00 - 0x00006c7f (0x80) IX[B] [33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [34] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [35] -1 0 0x00007c00 - 0x00007c0f (0x10) IX[B] [36] -1 0 0x00008000 - 0x00008003 (0x4) IX[B] [37] -1 0 0x00008400 - 0x00008407 (0x8) IX[B] [38] -1 0 0x00008800 - 0x00008803 (0x4) IX[B] [39] -1 0 0x00008c00 - 0x00008c07 (0x8) IX[B] [40] -1 0 0x00009800 - 0x0000987f (0x80) IX[B] [41] -1 0 0x0000ac00 - 0x0000ac07 (0x8) IX[B] [42] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [43] -1 0 0x0000b400 - 0x0000b40f (0x10) IX[B] [44] -1 0 0x0000b800 - 0x0000b803 (0x4) IX[B] [45] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [46] -1 0 0x0000c000 - 0x0000c003 (0x4) IX[B] [47] -1 0 0x0000c400 - 0x0000c407 (0x8) IX[B] [48] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [49] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [50] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [51] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [52] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [53] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B] [54] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [55] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [56] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [57] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [58] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [59] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [60] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [61] -1 0 0x0000fc00 - 0x0000fc3f (0x40) IX[B] [62] -1 0 0x00006c00 - 0x00006c7f (0x80) IX[B](B) [63] -1 0 0x00009c00 - 0x00009c7f (0x80) IX[B](B) [64] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [65] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)(==) NV(0): Write-combining range (0xe0000000,0x10000000)(II) NV(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Scanline Image Writes Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots(==) NV(0): Backing store disabled(==) NV(0): Silken mouse enabled(II) NV(0): DPMS enabled(==) RandR enabled(II) Initializing built-in extension MIT-SHM(II) Initializing built-in extension XInputExtension(II) Initializing built-in extension XTEST(II) Initializing built-in extension XKEYBOARD(II) Initializing built-in extension XC-APPGROUP(II) Initializing built-in extension XAccessControlExtension(II) Initializing built-in extension SECURITY(II) Initializing built-in extension XINERAMA(II) Initializing built-in extension XFIXES(II) Initializing built-in extension XFree86-Bigfont(II) Initializing built-in extension RENDER(II) Initializing built-in extension RANDR(II) Initializing built-in extension COMPOSITE(II) Initializing built-in extension DAMAGE(II) Initializing built-in extension XEVIE(II) AIGLX: Screen 0 is not DRI capable(II) Loading sub module "GLcore"(II) LoadModule: "GLcore"(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so(II) Module GLcore: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3(II) GLX: Initialized MESA-PROXY GL provider for screen 0(WW) Configured Mouse: No Device specified, looking for one...(II) Configured Mouse: Setting Device option to "/dev/input/mice"(--) Configured Mouse: Device: "/dev/input/mice"(==) Configured Mouse: Protocol: "Auto"(**) Option "CorePointer"(**) Configured Mouse: always reports core events(**) Option "Device" "/dev/input/mice"(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50(**) Configured Mouse: ZAxisMapping: buttons 4 and 5(**) Configured Mouse: Buttons: 9(**) Configured Mouse: Sensitivity: 1(**) Option "CoreKeyboard"(**) Generic Keyboard: always reports core events(**) Option "Protocol" "standard"(**) Generic Keyboard: Protocol: standard(**) Option "AutoRepeat" "500 30"(**) Option "XkbRules" "xorg"(**) Generic Keyboard: XkbRules: "xorg"(**) Option "XkbModel" "pc105"(**) Generic Keyboard: XkbModel: "pc105"(**) Option "XkbLayout" "us"(**) Generic Keyboard: XkbLayout: "us"(**) Option "XkbVariant" "intl"(**) Generic Keyboard: XkbVariant: "intl"(**) Option "XkbOptions" "lv3:ralt_switch"(**) Generic Keyboard: XkbOptions: "lv3:ralt_switch"(**) Option "CustomKeycodes" "off"(**) Generic Keyboard: CustomKeycodes disabled(II) evaluating device (Generic Keyboard)(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)(II) evaluating device (Configured Mouse)(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"(II) Configured Mouse: ps2EnableDataReporting: succeededSetClientVersion: 0 9apt:# # deb cdrom:[Ubuntu-Server 8.04.2 _Hardy Heron_ - Release amd64 (20090121.1)]/ hardy main restricted#deb cdrom:[Ubuntu-Server 8.04.2 _Hardy Heron_ - Release amd64 (20090121.1)]/ hardy main restricted# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to# newer versions of the distribution.deb http://us.archive.ubuntu.com/ubuntu/ hardy main restricteddeb-src http://us.archive.ubuntu.com/ubuntu/ hardy main restricted## Major bug fix updates produced after the final release of the## distribution.deb http://us.archive.ubuntu.com/ubuntu/ hardy-updates main restricteddeb-src http://us.archive.ubuntu.com/ubuntu/ hardy-updates main restricted## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu## team, and may not be under a free licence. Please satisfy yourself as to## your rights to use the software. Also, please note that software in## universe WILL NOT receive any review or updates from the Ubuntu security## team.deb http://us.archive.ubuntu.com/ubuntu/ hardy universedeb-src http://us.archive.ubuntu.com/ubuntu/ hardy universedeb http://us.archive.ubuntu.com/ubuntu/ hardy-updates universedeb-src http://us.archive.ubuntu.com/ubuntu/ hardy-updates universe## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu## security team.deb http://us.archive.ubuntu.com/ubuntu/ hardy multiversedeb-src http://us.archive.ubuntu.com/ubuntu/ hardy multiversedeb http://us.archive.ubuntu.com/ubuntu/ hardy-updates multiversedeb-src http://us.archive.ubuntu.com/ubuntu/ hardy-updates multiverse## Uncomment the following two lines to add software from the 'backports'## repository.## N.B. software from this repository may not have been tested as## extensively as that contained in the main release, although it includes## newer versions of some applications which may provide useful features.## Also, please note that software in backports WILL NOT receive any review## or updates from the Ubuntu security team.# deb http://us.archive.ubuntu.com/ubuntu/ hardy-backports main restricted universe multiverse# deb-src http://us.archive.ubuntu.com/ubuntu/ hardy-backports main restricted universe multiverse## Uncomment the following two lines to add software from Canonical's## 'partner' repository. This software is not part of Ubuntu, but is## offered by Canonical and the respective vendors as a service to Ubuntu## users.# deb http://archive.canonical.com/ubuntu hardy partner# deb-src http://archive.canonical.com/ubuntu hardy partnerdeb http://security.ubuntu.com/ubuntu hardy-security main restricteddeb-src http://security.ubuntu.com/ubuntu hardy-security main restricteddeb http://security.ubuntu.com/ubuntu hardy-security universedeb-src http://security.ubuntu.com/ubuntu hardy-security universedeb http://security.ubuntu.com/ubuntu hardy-security multiversedeb-src http://security.ubuntu.com/ubuntu hardy-security multiverseifconfig:eth0 Link encap:Ethernet HWaddr 00:18:f3:52:f2:20 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:249 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:18:f3:52:fd:c5 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:248 Base address:0x4000 eth2 Link encap:Ethernet HWaddr 00:04:76:ec:c7:d6 inet addr:192.168.2.3 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::204:76ff:feec:c7d6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:557 errors:0 dropped:0 overruns:1 frame:0 TX packets:632 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:308467 (301.2 KB) TX bytes:86731 (84.6 KB) Interrupt:17 Base address:0x8000 eth0:avahi Link encap:Ethernet HWaddr 00:18:f3:52:f2:20 inet addr:169.254.7.93 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 Interrupt:249 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3407 errors:0 dropped:0 overruns:0 frame:0 TX packets:3407 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:193673 (189.1 KB) TX bytes:193673 (189.1 KB)pci:May 22 01:32:11 ubuntu-890-base kernel: Inspecting /boot/System.map-2.6.24-23-serverMay 22 01:32:11 ubuntu-890-base kernel: Loaded 28757 symbols from /boot/System.map-2.6.24-23-server.May 22 01:32:11 ubuntu-890-base kernel: Symbols match kernel version 2.6.24.May 22 01:32:11 ubuntu-890-base kernel: Loaded 18644 symbols from 86 modules.May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpusetMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpuMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Linux version 2.6.24-23-server (buildd@crested) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Nov 27 18:45:02 UTC 2008 (Ubuntu 2.6.24-23.46-server)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro quiet splashMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] BIOS-provided physical RAM map:May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee0000 - 000000001fee3000 (ACPI NVS)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee3000 - 000000001fef0000 (ACPI data)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fef0000 - 000000001ff00000 (reserved)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] end_pfn_map = 1048576May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] DMI 2.3 present.May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7D60 checksum 0May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP 000F7D60, 0014 (r0 Nvidia)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDT 1FEE3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: FACP 1FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: DSDT 1FEE3180, 906B (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: FACS 1FEE0000, 0040May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: MCFG 1FEEC300, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: APIC 1FEEC240, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] CPU has 2 num_coresMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] No NUMA configuration foundMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Faking a node at 0000000000000000-000000001fee0000May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-000000001fee0000May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Zone PFN ranges:May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] DMA 0 -> 4096May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] DMA32 4096 -> 1048576May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Normal 1048576 -> 1048576May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Movable zone start PFN for each nodeMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] early_node_map[2] active PFN rangesMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] 0: 0 -> 159May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] 0: 256 -> 130784May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] On node 0 totalpages: 130687May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] DMA zone: 56 pages used for memmapMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] DMA zone: 1322 pages reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] DMA zone: 2621 pages, LIFO batch:0May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 1732 pages used for memmapMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 124956 pages, LIFO batch:31May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Normal zone: 0 pages used for memmapMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Movable zone: 0 pages used for memmapMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_overrideMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Processor #0 (Bootup-CPU)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Processor #1May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ9 used by override.May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ14 used by override.May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ15 used by override.May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Setting APIC routing to flatMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:d0100000)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUsMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] PERCPU: Allocating 41952 bytes of per cpu dataMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 127577May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Policy zone: DMA32May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Kernel command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro quiet splashMay 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] Initializing CPU#0May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)May 22 01:32:11 ubuntu-890-base kernel: [ 0.000000] TSC calibrated against PM_TIMERMay 22 01:32:11 ubuntu-890-base kernel: [ 27.087456] Marking TSC unstable due to TSCs unsynchronizedMay 22 01:32:11 ubuntu-890-base kernel: [ 27.087458] time.c: Detected 2411.099 MHz processor.May 22 01:32:11 ubuntu-890-base kernel: [ 27.088829] Console: colour VGA+ 80x25May 22 01:32:11 ubuntu-890-base kernel: [ 27.088832] console [tty0] enabledMay 22 01:32:11 ubuntu-890-base kernel: [ 27.088846] Checking aperture...May 22 01:32:11 ubuntu-890-base kernel: [ 27.088849] CPU 0: aperture @ ac32000000 size 32 MBMay 22 01:32:11 ubuntu-890-base kernel: [ 27.088850] Aperture too small (32 MB)May 22 01:32:11 ubuntu-890-base kernel: [ 27.093511] No AGP bridge foundMay 22 01:32:11 ubuntu-890-base kernel: [ 27.098939] Memory: 502556k/523136k available (2525k kernel code, 20192k reserved, 1330k data, 328k init)May 22 01:32:11 ubuntu-890-base kernel: [ 27.098977] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1May 22 01:32:11 ubuntu-890-base kernel: [ 27.247178] Calibrating delay using timer specific routine.. 4825.25 BogoMIPS (lpj=24126257)May 22 01:32:11 ubuntu-890-base kernel: [ 27.247211] Security Framework initializedMay 22 01:32:11 ubuntu-890-base kernel: [ 27.247218] SELinux: Disabled at boot.May 22 01:32:11 ubuntu-890-base kernel: [ 27.247231] AppArmor: AppArmor initializedMay 22 01:32:11 ubuntu-890-base kernel: [ 27.247234] Failure registering capabilities with primary security module.May 22 01:32:11 ubuntu-890-base kernel: [ 27.247281] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)May 22 01:32:11 ubuntu-890-base kernel: [ 27.247655] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)May 22 01:32:11 ubuntu-890-base kernel: [ 27.247853] Mount-cache hash table entries: 256May 22 01:32:11 ubuntu-890-base kernel: [ 27.248001] Initializing cgroup subsys nsMay 22 01:32:11 ubuntu-890-base kernel: [ 27.248005] Initializing cgroup subsys cpuacctMay 22 01:32:11 ubuntu-890-base kernel: [ 27.248016] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 22 01:32:11 ubuntu-890-base kernel: [ 27.248018] CPU: L2 Cache: 512K (64 bytes/line)May 22 01:32:11 ubuntu-890-base kernel: [ 27.248020] CPU 0/0 -> Node 0May 22 01:32:11 ubuntu-890-base kernel: [ 27.248022] CPU: Physical Processor ID: 0May 22 01:32:11 ubuntu-890-base kernel: [ 27.248023] CPU: Processor Core ID: 0May 22 01:32:11 ubuntu-890-base kernel: [ 27.248047] SMP alternatives: switching to UP codeMay 22 01:32:11 ubuntu-890-base kernel: [ 27.248660] Early unpacking initramfs... doneMay 22 01:32:11 ubuntu-890-base kernel: [ 27.521274] ACPI: Core revision 20070126May 22 01:32:11 ubuntu-890-base kernel: [ 27.521339] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.May 22 01:32:11 ubuntu-890-base kernel: [ 27.628471] Using local APIC timer interrupts.May 22 01:32:11 ubuntu-890-base kernel: [ 27.669881] APIC timer calibration result 12557798May 22 01:32:11 ubuntu-890-base kernel: [ 27.669883] Detected 12.557 MHz APIC timer.May 22 01:32:11 ubuntu-890-base kernel: [ 27.669990] SMP alternatives: switching to SMP codeMay 22 01:32:11 ubuntu-890-base kernel: [ 27.670516] Booting processor 1/2 APIC 0x1May 22 01:32:11 ubuntu-890-base kernel: [ 27.681796] Initializing CPU#1May 22 01:32:11 ubuntu-890-base kernel: [ 27.830867] Calibrating delay using timer specific routine.. 4822.22 BogoMIPS (lpj=24111129)May 22 01:32:11 ubuntu-890-base kernel: [ 27.830872] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 22 01:32:11 ubuntu-890-base kernel: [ 27.830874] CPU: L2 Cache: 512K (64 bytes/line)May 22 01:32:11 ubuntu-890-base kernel: [ 27.830876] CPU 1/1 -> Node 0May 22 01:32:11 ubuntu-890-base kernel: [ 27.830877] CPU: Physical Processor ID: 0May 22 01:32:11 ubuntu-890-base kernel: [ 27.830878] CPU: Processor Core ID: 1May 22 01:32:11 ubuntu-890-base kernel: [ 27.830953] AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02May 22 01:32:11 ubuntu-890-base kernel: [ 27.829800] Brought up 2 CPUsMay 22 01:32:11 ubuntu-890-base kernel: [ 27.829905] CPU0 attaching sched-domain:May 22 01:32:11 ubuntu-890-base kernel: [ 27.829908] domain 0: span 00000000,00000003May 22 01:32:11 ubuntu-890-base kernel: [ 27.829910] groups: 00000000,00000001 00000000,00000002May 22 01:32:11 ubuntu-890-base kernel: [ 27.829913] domain 1: span 00000000,00000003May 22 01:32:11 ubuntu-890-base kernel: [ 27.829915] groups: 00000000,00000003May 22 01:32:11 ubuntu-890-base kernel: [ 27.829916] CPU1 attaching sched-domain:May 22 01:32:11 ubuntu-890-base kernel: [ 27.829918] domain 0: span 00000000,00000003May 22 01:32:11 ubuntu-890-base kernel: [ 27.829919] groups: 00000000,00000002 00000000,00000001May 22 01:32:11 ubuntu-890-base kernel: [ 27.829922] domain 1: span 00000000,00000003May 22 01:32:11 ubuntu-890-base kernel: [ 27.829923] groups: 00000000,00000003May 22 01:32:11 ubuntu-890-base kernel: [ 27.830242] net_namespace: 120 bytesMay 22 01:32:11 ubuntu-890-base kernel: [ 27.830612] Time: 1:31:52 Date: 05/22/09May 22 01:32:11 ubuntu-890-base kernel: [ 27.830646] NET: Registered protocol family 16May 22 01:32:11 ubuntu-890-base kernel: [ 27.830828] ACPI: bus type pci registeredMay 22 01:32:11 ubuntu-890-base kernel: [ 27.830916] PCI: Using configuration type 1May 22 01:32:11 ubuntu-890-base kernel: [ 27.832493] ACPI: EC: Look up EC in DSDTMay 22 01:32:11 ubuntu-890-base kernel: [ 27.840219] ACPI: Interpreter enabledMay 22 01:32:11 ubuntu-890-base kernel: [ 27.840221] ACPI: (supports S0 S1 S3 S4 S5)May 22 01:32:11 ubuntu-890-base kernel: [ 27.840237] ACPI: Using IOAPIC for interrupt routingMay 22 01:32:11 ubuntu-890-base kernel: [ 27.851077] ACPI: PCI Root Bridge [PCI0] (0000:00)May 22 01:32:11 ubuntu-890-base kernel: [ 27.851761] PCI: Transparent bridge - 0000:00:06.0May 22 01:32:11 ubuntu-890-base kernel: [ 27.852194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]May 22 01:32:11 ubuntu-890-base kernel: [ 27.852588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]May 22 01:32:11 ubuntu-890-base kernel: [ 27.950386] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.950591] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.950789] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.950987] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.951184] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.951384] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.951583] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.951781] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.951979] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.952181] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.952380] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.952578] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.952781] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.952979] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.953178] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.953377] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.953575] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.953774] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.953973] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.954173] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)May 22 01:32:11 ubuntu-890-base kernel: [ 27.954406] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.954630] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.954853] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.955077] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.955299] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.955522] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.955745] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.955967] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.956193] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.956418] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.956643] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.956868] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.957093] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.957318] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.957543] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.957772] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.957996] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 27.958220] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.958444] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.958668] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0May 22 01:32:11 ubuntu-890-base kernel: [ 27.958807] Linux Plug and Play Support v0.97 (c) Adam BelayMay 22 01:32:11 ubuntu-890-base kernel: [ 27.958836] pnp: PnP ACPI initMay 22 01:32:11 ubuntu-890-base kernel: [ 27.958844] ACPI: bus type pnp registeredMay 22 01:32:11 ubuntu-890-base kernel: [ 27.964595] pnpacpi: exceeded the max number of mem resources: 12May 22 01:32:11 ubuntu-890-base kernel: [ 27.964708] pnp: PnP ACPI: found 13 devicesMay 22 01:32:11 ubuntu-890-base kernel: [ 27.964710] ACPI: ACPI bus type pnp unregisteredMay 22 01:32:11 ubuntu-890-base kernel: [ 27.964930] PCI: Using ACPI for IRQ routingMay 22 01:32:11 ubuntu-890-base kernel: [ 27.964934] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportMay 22 01:32:11 ubuntu-890-base kernel: [ 27.999391] NET: Registered protocol family 8May 22 01:32:11 ubuntu-890-base kernel: [ 27.999393] NET: Registered protocol family 20May 22 01:32:11 ubuntu-890-base kernel: [ 27.999416] NetLabel: InitializingMay 22 01:32:11 ubuntu-890-base kernel: [ 27.999417] NetLabel: domain hash size = 128May 22 01:32:11 ubuntu-890-base kernel: [ 27.999418] NetLabel: protocols = UNLABELED CIPSOv4May 22 01:32:11 ubuntu-890-base kernel: [ 27.999432] NetLabel: unlabeled traffic allowed by defaultMay 22 01:32:11 ubuntu-890-base kernel: [ 27.999539] AppArmor: AppArmor Filesystem EnabledMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029333] system 00:01: ioport range 0x1000-0x107f has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029335] system 00:01: ioport range 0x1080-0x10ff has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029337] system 00:01: ioport range 0x1400-0x147f has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029339] system 00:01: ioport range 0x1480-0x14ff has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029341] system 00:01: ioport range 0x1800-0x187f has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029343] system 00:01: ioport range 0x1880-0x18ff has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029349] system 00:02: ioport range 0x4d0-0x4d1 has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029351] system 00:02: ioport range 0x800-0x87f has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029353] system 00:02: ioport range 0x290-0x297 has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029365] system 00:0b: iomem range 0x0-0x0 could not be reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029370] system 00:0c: iomem range 0xd5800-0xd7fff has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029372] system 00:0c: iomem range 0xf0000-0xf7fff could not be reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029374] system 00:0c: iomem range 0xf8000-0xfbfff could not be reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029376] system 00:0c: iomem range 0xfc000-0xfffff could not be reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029378] system 00:0c: iomem range 0x1fee0000-0x1fefffff could not be reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029381] system 00:0c: iomem range 0xffff0000-0xffffffff has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029386] system 00:0c: iomem range 0x0-0x9ffff could not be reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029388] system 00:0c: iomem range 0x100000-0x1fedffff could not be reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029390] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029392] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029394] system 00:0c: iomem range 0xfefff000-0xfeffffff has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029396] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reservedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029748] PCI: Bridge: 0000:00:06.0May 22 01:32:11 ubuntu-890-base kernel: [ 28.029749] IO window: 9000-9fffMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029752] MEM window: fde00000-fdefffffMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029754] PREFETCH window: fd000000-fd7fffffMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029756] PCI: Bridge: 0000:00:0a.0May 22 01:32:11 ubuntu-890-base kernel: [ 28.029757] IO window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029758] MEM window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029760] PREFETCH window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029762] PCI: Bridge: 0000:00:0b.0May 22 01:32:11 ubuntu-890-base kernel: [ 28.029763] IO window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029764] MEM window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029766] PREFETCH window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029767] PCI: Bridge: 0000:00:0c.0May 22 01:32:11 ubuntu-890-base kernel: [ 28.029768] IO window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029770] MEM window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029771] PREFETCH window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029773] PCI: Bridge: 0000:00:0d.0May 22 01:32:11 ubuntu-890-base kernel: [ 28.029774] IO window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029775] MEM window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029777] PREFETCH window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029778] PCI: Bridge: 0000:00:0e.0May 22 01:32:11 ubuntu-890-base kernel: [ 28.029780] IO window: 7000-8fffMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029782] MEM window: fdd00000-fddfffffMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029783] PREFETCH window: disabled.May 22 01:32:11 ubuntu-890-base kernel: [ 28.029785] PCI: Bridge: 0000:00:0f.0May 22 01:32:11 ubuntu-890-base kernel: [ 28.029786] IO window: 6000-6fffMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029788] MEM window: fa000000-fcffffffMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029790] PREFETCH window: e0000000-efffffffMay 22 01:32:11 ubuntu-890-base kernel: [ 28.029798] PCI: Setting latency timer of device 0000:00:06.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.029807] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.029812] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.029818] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.029823] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.029828] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.029834] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.029844] NET: Registered protocol family 2May 22 01:32:11 ubuntu-890-base kernel: [ 28.039285] Time: acpi_pm clocksource has been installed.May 22 01:32:11 ubuntu-890-base kernel: [ 28.039301] Switched to high resolution mode on CPU 0May 22 01:32:11 ubuntu-890-base kernel: [ 28.040650] Switched to high resolution mode on CPU 1May 22 01:32:11 ubuntu-890-base kernel: [ 28.119359] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)May 22 01:32:11 ubuntu-890-base kernel: [ 28.119565] TCP established hash table entries: 16384 (order: 6, 262144 bytes)May 22 01:32:11 ubuntu-890-base kernel: [ 28.119757] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)May 22 01:32:11 ubuntu-890-base kernel: [ 28.119932] TCP: Hash tables configured (established 16384 bind 16384)May 22 01:32:11 ubuntu-890-base kernel: [ 28.119935] TCP reno registeredMay 22 01:32:11 ubuntu-890-base kernel: [ 28.149248] checking if image is initramfs... it isMay 22 01:32:11 ubuntu-890-base kernel: [ 28.678805] Freeing initrd memory: 7583k freedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.685587] audit: initializing netlink socket (disabled)May 22 01:32:11 ubuntu-890-base kernel: [ 28.685601] audit(1242955912.580:1): initializedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.685723] Total HugeTLB memory allocated, 0May 22 01:32:11 ubuntu-890-base kernel: [ 28.687327] VFS: Disk quotas dquot_6.5.1May 22 01:32:11 ubuntu-890-base kernel: [ 28.687399] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)May 22 01:32:11 ubuntu-890-base kernel: [ 28.687569] io scheduler noop registeredMay 22 01:32:11 ubuntu-890-base kernel: [ 28.687571] io scheduler anticipatory registeredMay 22 01:32:11 ubuntu-890-base kernel: [ 28.687572] io scheduler deadline registered (default)May 22 01:32:11 ubuntu-890-base kernel: [ 28.687657] io scheduler cfq registeredMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708519] pci 0000:00:05.0: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708535] pci 0000:00:05.1: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708548] pci 0000:00:05.2: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708560] pci 0000:00:06.0: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708573] pci 0000:00:06.1: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708588] pci 0000:00:08.0: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708602] pci 0000:00:09.0: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708615] pci 0000:00:0a.0: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708628] pci 0000:00:0b.0: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708641] pci 0000:00:0c.0: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708654] pci 0000:00:0d.0: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708667] pci 0000:00:0e.0: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708680] pci 0000:00:0f.0: Enabling HT MSI MappingMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708701] Boot video device is 0000:07:00.0May 22 01:32:11 ubuntu-890-base kernel: [ 28.708867] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.708886] assign_interrupt_mode Found MSI capabilityMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708904] Allocate Port Service[0000:00:0a.0:pcie00]May 22 01:32:11 ubuntu-890-base kernel: [ 28.708959] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.708977] assign_interrupt_mode Found MSI capabilityMay 22 01:32:11 ubuntu-890-base kernel: [ 28.708990] Allocate Port Service[0000:00:0b.0:pcie00]May 22 01:32:11 ubuntu-890-base kernel: [ 28.709039] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.709056] assign_interrupt_mode Found MSI capabilityMay 22 01:32:11 ubuntu-890-base kernel: [ 28.709069] Allocate Port Service[0000:00:0c.0:pcie00]May 22 01:32:11 ubuntu-890-base kernel: [ 28.709119] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.709137] assign_interrupt_mode Found MSI capabilityMay 22 01:32:11 ubuntu-890-base kernel: [ 28.709149] Allocate Port Service[0000:00:0d.0:pcie00]May 22 01:32:11 ubuntu-890-base kernel: [ 28.709201] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.709218] assign_interrupt_mode Found MSI capabilityMay 22 01:32:11 ubuntu-890-base kernel: [ 28.709231] Allocate Port Service[0000:00:0e.0:pcie00]May 22 01:32:11 ubuntu-890-base kernel: [ 28.709278] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 28.709296] assign_interrupt_mode Found MSI capabilityMay 22 01:32:11 ubuntu-890-base kernel: [ 28.709308] Allocate Port Service[0000:00:0f.0:pcie00]May 22 01:32:11 ubuntu-890-base kernel: [ 28.732345] Real Time Clock Driver v1.12acMay 22 01:32:11 ubuntu-890-base kernel: [ 28.732449] Linux agpgart interface v0.102May 22 01:32:11 ubuntu-890-base kernel: [ 28.732451] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledMay 22 01:32:11 ubuntu-890-base kernel: [ 28.732604] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 22 01:32:11 ubuntu-890-base kernel: [ 28.733118] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 22 01:32:11 ubuntu-890-base kernel: [ 28.733785] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeMay 22 01:32:11 ubuntu-890-base kernel: [ 28.733848] input: Macintosh mouse button emulation as /devices/virtual/input/input0May 22 01:32:11 ubuntu-890-base kernel: [ 28.733930] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1May 22 01:32:11 ubuntu-890-base kernel: [ 28.733932] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnpMay 22 01:32:11 ubuntu-890-base kernel: [ 28.734029] serio: i8042 KBD port at 0x60,0x64 irq 1May 22 01:32:11 ubuntu-890-base kernel: [ 28.768440] mice: PS/2 mouse device common for all miceMay 22 01:32:11 ubuntu-890-base kernel: [ 28.768482] cpuidle: using governor ladderMay 22 01:32:11 ubuntu-890-base kernel: [ 28.768484] cpuidle: using governor menuMay 22 01:32:11 ubuntu-890-base kernel: [ 28.768634] NET: Registered protocol family 1May 22 01:32:11 ubuntu-890-base kernel: [ 28.768734] registered taskstats version 1May 22 01:32:11 ubuntu-890-base kernel: [ 28.768909] Magic number: 9:227:509May 22 01:32:11 ubuntu-890-base kernel: [ 28.769027] hash matches device 0000:00:01.1May 22 01:32:11 ubuntu-890-base kernel: [ 28.769050] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)May 22 01:32:11 ubuntu-890-base kernel: [ 28.769052] BIOS EDD facility v0.16 2004-Jun-25, 6 devices foundMay 22 01:32:11 ubuntu-890-base kernel: [ 28.769248] Freeing unused kernel memory: 328k freedMay 22 01:32:11 ubuntu-890-base kernel: [ 28.769709] Write protecting the kernel read-only data: 1044kMay 22 01:32:11 ubuntu-890-base kernel: [ 28.795786] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1May 22 01:32:11 ubuntu-890-base kernel: [ 29.955843] fuse init (API version 7.9)May 22 01:32:11 ubuntu-890-base kernel: [ 29.975796] ACPI: Fan [FAN] (on)May 22 01:32:11 ubuntu-890-base kernel: [ 29.981487] ACPI: Thermal Zone [THRM] (40 C)May 22 01:32:11 ubuntu-890-base kernel: [ 30.297722] usbcore: registered new interface driver usbfsMay 22 01:32:11 ubuntu-890-base kernel: [ 30.297745] usbcore: registered new interface driver hubMay 22 01:32:11 ubuntu-890-base kernel: [ 30.298813] usbcore: registered new device driver usbMay 22 01:32:11 ubuntu-890-base kernel: [ 30.306259] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23May 22 01:32:11 ubuntu-890-base kernel: [ 30.306274] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23May 22 01:32:11 ubuntu-890-base kernel: [ 30.306474] PCI: Setting latency timer of device 0000:00:02.1 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 30.306480] ehci_hcd 0000:00:02.1: EHCI Host ControllerMay 22 01:32:11 ubuntu-890-base kernel: [ 30.306750] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1May 22 01:32:11 ubuntu-890-base kernel: [ 30.306784] ehci_hcd 0000:00:02.1: debug port 1May 22 01:32:11 ubuntu-890-base kernel: [ 30.306787] PCI: cache line size of 64 is not supported by device 0000:00:02.1May 22 01:32:11 ubuntu-890-base kernel: [ 30.306800] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000May 22 01:32:11 ubuntu-890-base kernel: [ 30.324888] SCSI subsystem initializedMay 22 01:32:11 ubuntu-890-base kernel: [ 30.326622] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverMay 22 01:32:11 ubuntu-890-base kernel: [ 30.325506] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004May 22 01:32:11 ubuntu-890-base kernel: [ 30.325663] usb usb1: configuration #1 chosen from 1 choiceMay 22 01:32:11 ubuntu-890-base kernel: [ 30.325686] hub 1-0:1.0: USB hub foundMay 22 01:32:11 ubuntu-890-base kernel: [ 30.325695] hub 1-0:1.0: 10 ports detectedMay 22 01:32:11 ubuntu-890-base kernel: [ 30.331799] libata version 3.00 loaded.May 22 01:32:11 ubuntu-890-base kernel: [ 30.437207] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22May 22 01:32:11 ubuntu-890-base kernel: [ 30.437223] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22May 22 01:32:11 ubuntu-890-base kernel: [ 30.437441] PCI: Setting latency timer of device 0000:00:02.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 30.437448] ohci_hcd 0000:00:02.0: OHCI Host ControllerMay 22 01:32:11 ubuntu-890-base kernel: [ 30.437510] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2May 22 01:32:11 ubuntu-890-base kernel: [ 30.437536] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000May 22 01:32:11 ubuntu-890-base kernel: [ 30.455259] Floppy drive(s): fd0 is 1.44MMay 22 01:32:11 ubuntu-890-base kernel: [ 30.473023] FDC 0 is a post-1991 82077May 22 01:32:11 ubuntu-890-base kernel: [ 30.491100] usb usb2: configuration #1 chosen from 1 choiceMay 22 01:32:11 ubuntu-890-base kernel: [ 30.491125] hub 2-0:1.0: USB hub foundMay 22 01:32:11 ubuntu-890-base kernel: [ 30.491132] hub 2-0:1.0: 10 ports detectedMay 22 01:32:11 ubuntu-890-base kernel: [ 30.599455] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17May 22 01:32:11 ubuntu-890-base kernel: [ 30.599467] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17May 22 01:32:11 ubuntu-890-base kernel: [ 30.599642] 3c59x: Donald Becker and others.May 22 01:32:11 ubuntu-890-base kernel: [ 30.599659] 0000:01:07.0: 3Com PCI 3c905C Tornado at ffffc20000174000.May 22 01:32:11 ubuntu-890-base kernel: [ 30.619894] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.May 22 01:32:11 ubuntu-890-base kernel: [ 30.620318] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21May 22 01:32:11 ubuntu-890-base kernel: [ 30.620329] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21May 22 01:32:11 ubuntu-890-base kernel: [ 30.620334] PCI: Setting latency timer of device 0000:00:08.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 30.934623] usb 1-4: new high speed USB device using ehci_hcd and address 3May 22 01:32:11 ubuntu-890-base kernel: [ 31.087503] usb 1-4: configuration #1 chosen from 1 choiceMay 22 01:32:11 ubuntu-890-base kernel: [ 31.154824] forcedeth 0000:00:08.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:f2:20May 22 01:32:11 ubuntu-890-base kernel: [ 31.154829] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 22 01:32:11 ubuntu-890-base kernel: [ 31.155259] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 20May 22 01:32:11 ubuntu-890-base kernel: [ 31.155269] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AMC1] -> GSI 20 (level, low) -> IRQ 20May 22 01:32:11 ubuntu-890-base kernel: [ 31.155274] PCI: Setting latency timer of device 0000:00:09.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 31.427416] usb 2-3: new low speed USB device using ohci_hcd and address 2May 22 01:32:11 ubuntu-890-base kernel: [ 31.654172] usb 2-3: configuration #1 chosen from 1 choiceMay 22 01:32:11 ubuntu-890-base kernel: [ 31.661227] usbcore: registered new interface driver libusualMay 22 01:32:11 ubuntu-890-base kernel: [ 31.661354] usbcore: registered new interface driver hiddevMay 22 01:32:11 ubuntu-890-base kernel: [ 31.662635] hiddev96hidraw0: USB HID v1.00 Device [Lexmark 6500 Series] on usb-0000:00:02.1-4May 22 01:32:11 ubuntu-890-base kernel: [ 31.663364] Initializing USB Mass Storage driver...May 22 01:32:11 ubuntu-890-base kernel: [ 31.663506] scsi0 : SCSI emulation for USB Mass Storage devicesMay 22 01:32:11 ubuntu-890-base kernel: [ 31.664821] usb-storage: device found at 3May 22 01:32:11 ubuntu-890-base kernel: [ 31.664823] usb-storage: waiting for device to settle before scanningMay 22 01:32:11 ubuntu-890-base kernel: [ 31.668302] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2May 22 01:32:11 ubuntu-890-base kernel: [ 31.673723] forcedeth 0000:00:09.0: ifname eth2, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:fd:c5May 22 01:32:11 ubuntu-890-base kernel: [ 31.673728] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 22 01:32:11 ubuntu-890-base kernel: [ 31.673942] PCI: Setting latency timer of device 0000:00:04.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 31.674385] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23May 22 01:32:11 ubuntu-890-base kernel: [ 31.674388] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23May 22 01:32:11 ubuntu-890-base kernel: [ 31.674409] PCI: Setting latency timer of device 0000:00:05.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 31.674415] ACPI: PCI interrupt for device 0000:00:05.0 disabledMay 22 01:32:11 ubuntu-890-base kernel: [ 31.674765] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22May 22 01:32:11 ubuntu-890-base kernel: [ 31.674767] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22May 22 01:32:11 ubuntu-890-base kernel: [ 31.674780] PCI: Setting latency timer of device 0000:00:05.1 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 31.674786] ACPI: PCI interrupt for device 0000:00:05.1 disabledMay 22 01:32:11 ubuntu-890-base kernel: [ 31.675131] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21May 22 01:32:11 ubuntu-890-base kernel: [ 31.675133] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21May 22 01:32:11 ubuntu-890-base kernel: [ 31.675147] PCI: Setting latency timer of device 0000:00:05.2 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 31.675153] ACPI: PCI interrupt for device 0000:00:05.2 disabledMay 22 01:32:11 ubuntu-890-base kernel: [ 31.675177] PCI: Enabling device 0000:06:00.1 (0000 -> 0001)May 22 01:32:11 ubuntu-890-base kernel: [ 31.675507] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16May 22 01:32:11 ubuntu-890-base kernel: [ 31.675516] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 22 01:32:11 ubuntu-890-base kernel: [ 31.675542] PCI: Setting latency timer of device 0000:06:00.1 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 31.675550] ACPI: PCI interrupt for device 0000:06:00.1 disabledMay 22 01:32:11 ubuntu-890-base kernel: [ 31.676846] ahci 0000:06:00.0: version 3.0May 22 01:32:11 ubuntu-890-base kernel: [ 31.677316] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16May 22 01:32:11 ubuntu-890-base kernel: [ 31.677319] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16May 22 01:32:11 ubuntu-890-base kernel: [ 31.736985] input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3May 22 01:32:11 ubuntu-890-base kernel: [ 31.744985] hiddev97hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-3May 22 01:32:11 ubuntu-890-base kernel: [ 31.743777] usbcore: registered new interface driver usb-storageMay 22 01:32:11 ubuntu-890-base kernel: [ 31.745040] usbcore: registered new interface driver usbhidMay 22 01:32:11 ubuntu-890-base kernel: [ 31.745044] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driverMay 22 01:32:11 ubuntu-890-base kernel: [ 31.743789] USB Mass Storage support registered.May 22 01:32:11 ubuntu-890-base kernel: [ 32.682850] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA modeMay 22 01:32:11 ubuntu-890-base kernel: [ 32.682855] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part May 22 01:32:11 ubuntu-890-base kernel: [ 32.682860] PCI: Setting latency timer of device 0000:06:00.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 32.683025] scsi1 : ahciMay 22 01:32:11 ubuntu-890-base kernel: [ 32.683588] scsi2 : ahciMay 22 01:32:11 ubuntu-890-base kernel: [ 32.683615] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16May 22 01:32:11 ubuntu-890-base kernel: [ 32.683618] ata2: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16May 22 01:32:11 ubuntu-890-base kernel: [ 33.034748] ata1: SATA link down (SStatus 0 SControl 300)May 22 01:32:11 ubuntu-890-base kernel: [ 33.381671] ata2: SATA link down (SStatus 0 SControl 300)May 22 01:32:11 ubuntu-890-base kernel: [ 33.382718] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19May 22 01:32:11 ubuntu-890-base kernel: [ 33.382729] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19May 22 01:32:11 ubuntu-890-base kernel: [ 33.432785] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8]May 22 01:32:11 ubuntu-890-base kernel: [ 33.434295] pata_amd 0000:00:04.0: version 0.3.10May 22 01:32:11 ubuntu-890-base kernel: [ 33.434343] PCI: Setting latency timer of device 0000:00:04.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 33.437691] scsi3 : pata_amdMay 22 01:32:11 ubuntu-890-base kernel: [ 33.437783] scsi4 : pata_amdMay 22 01:32:11 ubuntu-890-base kernel: [ 33.438369] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14May 22 01:32:11 ubuntu-890-base kernel: [ 33.438372] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15May 22 01:32:11 ubuntu-890-base kernel: [ 33.963420] ata3.01: ATAPI: LITE-ON LTR-52327S, QS06, max UDMA/33May 22 01:32:11 ubuntu-890-base kernel: [ 34.163023] ata3.01: configured for UDMA/33May 22 01:32:11 ubuntu-890-base kernel: [ 34.163062] ata4: port disabled. ignoring.May 22 01:32:11 ubuntu-890-base kernel: [ 34.163961] scsi 3:0:1:0: CD-ROM LITE-ON LTR-52327S QS06 PQ: 0 ANSI: 5May 22 01:32:11 ubuntu-890-base kernel: [ 34.163749] sata_nv 0000:00:05.0: version 3.5May 22 01:32:11 ubuntu-890-base kernel: [ 34.163764] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23May 22 01:32:11 ubuntu-890-base kernel: [ 34.163984] PCI: Setting latency timer of device 0000:00:05.0 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 34.164160] scsi5 : sata_nvMay 22 01:32:11 ubuntu-890-base kernel: [ 34.164550] scsi6 : sata_nvMay 22 01:32:11 ubuntu-890-base kernel: [ 34.164742] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23May 22 01:32:11 ubuntu-890-base kernel: [ 34.164744] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23May 22 01:32:11 ubuntu-890-base kernel: [ 34.171424] Driver 'sr' needs updating - please use bus_type methodsMay 22 01:32:11 ubuntu-890-base kernel: [ 34.172525] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda trayMay 22 01:32:11 ubuntu-890-base kernel: [ 34.172528] Uniform CD-ROM driver Revision: 3.20May 22 01:32:11 ubuntu-890-base kernel: [ 34.172561] sr 3:0:1:0: Attached scsi CD-ROM sr0May 22 01:32:11 ubuntu-890-base kernel: [ 34.176363] sr 3:0:1:0: Attached scsi generic sg0 type 5May 22 01:32:11 ubuntu-890-base kernel: [ 34.652053] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)May 22 01:32:11 ubuntu-890-base kernel: [ 34.695896] ata5.00: ATA-7: WDC WD2500JS-00SGB0, 20.06C03, max UDMA/133May 22 01:32:11 ubuntu-890-base kernel: [ 34.695898] ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)May 22 01:32:11 ubuntu-890-base kernel: [ 34.710351] ata5.00: configured for UDMA/133May 22 01:32:11 ubuntu-890-base kernel: [ 34.742025] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7a6f6]May 22 01:32:11 ubuntu-890-base kernel: [ 35.041395] ata6: SATA link down (SStatus 0 SControl 300)May 22 01:32:11 ubuntu-890-base kernel: [ 35.050499] scsi 5:0:0:0: Direct-Access ATA WDC WD2500JS-00S 20.0 PQ: 0 ANSI: 5May 22 01:32:11 ubuntu-890-base kernel: [ 35.050575] scsi 5:0:0:0: Attached scsi generic sg1 type 0May 22 01:32:11 ubuntu-890-base kernel: [ 35.050620] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22May 22 01:32:11 ubuntu-890-base kernel: [ 35.050838] PCI: Setting latency timer of device 0000:00:05.1 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 35.052062] scsi7 : sata_nvMay 22 01:32:11 ubuntu-890-base kernel: [ 35.052461] scsi8 : sata_nvMay 22 01:32:11 ubuntu-890-base kernel: [ 35.052643] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22May 22 01:32:11 ubuntu-890-base kernel: [ 35.052645] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22May 22 01:32:11 ubuntu-890-base kernel: [ 35.378340] ata7: SATA link down (SStatus 0 SControl 300)May 22 01:32:11 ubuntu-890-base kernel: [ 35.717772] ata8: SATA link down (SStatus 0 SControl 300)May 22 01:32:11 ubuntu-890-base kernel: [ 35.726821] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21May 22 01:32:11 ubuntu-890-base kernel: [ 35.727074] PCI: Setting latency timer of device 0000:00:05.2 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 35.727175] scsi9 : sata_nvMay 22 01:32:11 ubuntu-890-base kernel: [ 35.727757] scsi10 : sata_nvMay 22 01:32:11 ubuntu-890-base kernel: [ 35.727942] ata9: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21May 22 01:32:11 ubuntu-890-base kernel: [ 35.727945] ata10: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21May 22 01:32:11 ubuntu-890-base kernel: [ 36.055947] ata9: SATA link down (SStatus 0 SControl 300)May 22 01:32:11 ubuntu-890-base kernel: [ 36.395376] ata10: SATA link down (SStatus 0 SControl 300)May 22 01:32:11 ubuntu-890-base kernel: [ 36.405830] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 22 01:32:11 ubuntu-890-base kernel: [ 36.405879] PCI: Setting latency timer of device 0000:06:00.1 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 36.407741] scsi11 : pata_jmicronMay 22 01:32:11 ubuntu-890-base kernel: [ 36.408233] scsi12 : pata_jmicronMay 22 01:32:11 ubuntu-890-base kernel: [ 36.408272] ata11: PATA max UDMA/100 cmd 0x8c00 ctl 0x8800 bmdma 0x7c00 irq 16May 22 01:32:11 ubuntu-890-base kernel: [ 36.408274] ata12: PATA max UDMA/100 cmd 0x8400 ctl 0x8000 bmdma 0x7c08 irq 16May 22 01:32:11 ubuntu-890-base kernel: [ 36.414344] Driver 'sd' needs updating - please use bus_type methodsMay 22 01:32:11 ubuntu-890-base kernel: [ 36.414435] sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 22 01:32:11 ubuntu-890-base kernel: [ 36.414445] sd 5:0:0:0: [sda] Write Protect is offMay 22 01:32:11 ubuntu-890-base kernel: [ 36.414447] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00May 22 01:32:11 ubuntu-890-base kernel: [ 36.414461] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 22 01:32:11 ubuntu-890-base kernel: [ 36.414504] sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 22 01:32:11 ubuntu-890-base kernel: [ 36.414511] sd 5:0:0:0: [sda] Write Protect is offMay 22 01:32:11 ubuntu-890-base kernel: [ 36.414513] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00May 22 01:32:11 ubuntu-890-base kernel: [ 36.414525] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 22 01:32:11 ubuntu-890-base kernel: [ 36.414528] sda: sda1 sda2 < sda5 sda6 >May 22 01:32:11 ubuntu-890-base kernel: [ 36.445902] sd 5:0:0:0: [sda] Attached SCSI diskMay 22 01:32:11 ubuntu-890-base kernel: [ 36.659714] usb-storage: device scan completeMay 22 01:32:11 ubuntu-890-base kernel: [ 36.660104] scsi 0:0:0:0: Direct-Access Lexmark USB Mass Storage 200 PQ: 0 ANSI: 0May 22 01:32:11 ubuntu-890-base kernel: [ 36.664646] sd 0:0:0:0: [sdb] Attached SCSI removable diskMay 22 01:32:11 ubuntu-890-base kernel: [ 36.664687] sd 0:0:0:0: Attached scsi generic sg2 type 0May 22 01:32:11 ubuntu-890-base kernel: [ 36.767309] Attempting manual resumeMay 22 01:32:11 ubuntu-890-base kernel: [ 36.767313] swsusp: Resume From Partition 8:6May 22 01:32:11 ubuntu-890-base kernel: [ 36.767315] PM: Checking swsusp image.May 22 01:32:11 ubuntu-890-base kernel: [ 36.768758] PM: Resume from disk failed.May 22 01:32:11 ubuntu-890-base kernel: [ 36.802689] kjournald starting. Commit interval 5 secondsMay 22 01:32:11 ubuntu-890-base kernel: [ 36.803961] EXT3-fs: mounted filesystem with ordered data mode.May 22 01:32:11 ubuntu-890-base kernel: [ 41.441447] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00May 22 01:32:11 ubuntu-890-base kernel: [ 41.441465] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40May 22 01:32:11 ubuntu-890-base kernel: [ 41.463997] pci_hotplug: PCI Hot Plug PCI Core version: 0.5May 22 01:32:11 ubuntu-890-base kernel: [ 41.474697] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4May 22 01:32:11 ubuntu-890-base kernel: [ 41.589519] input: Power Button (FF) as /devices/virtual/input/input3May 22 01:32:11 ubuntu-890-base kernel: [ 41.650472] ACPI: Power Button (FF) [PWRF]May 22 01:32:11 ubuntu-890-base kernel: [ 41.650564] input: Power Button (CM) as /devices/virtual/input/input4May 22 01:32:11 ubuntu-890-base kernel: [ 41.720327] ACPI: Power Button (CM) [PWRB]May 22 01:32:11 ubuntu-890-base kernel: [ 42.138932] udev: renamed network interface eth2 to eth1May 22 01:32:11 ubuntu-890-base kernel: [ 42.194158] udev: renamed network interface eth0 to eth2May 22 01:32:11 ubuntu-890-base kernel: [ 42.200831] eth2: setting full-duplex.May 22 01:32:11 ubuntu-890-base kernel: [ 42.237937] udev: renamed network interface eth1_rename to eth0May 22 01:32:11 ubuntu-890-base kernel: [ 42.827012] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20May 22 01:32:11 ubuntu-890-base kernel: [ 42.827018] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20May 22 01:32:11 ubuntu-890-base kernel: [ 42.827205] PCI: Setting latency timer of device 0000:00:06.1 to 64May 22 01:32:11 ubuntu-890-base kernel: [ 42.878793] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x043D pid 0x010FMay 22 01:32:11 ubuntu-890-base kernel: [ 42.878820] usbcore: registered new interface driver usblpMay 22 01:32:11 ubuntu-890-base kernel: [ 42.879274] input: PC Speaker as /devices/platform/pcspkr/input/input5May 22 01:32:11 ubuntu-890-base kernel: [ 43.304360] parport_pc 00:09: reported by Plug and Play ACPIMay 22 01:32:11 ubuntu-890-base kernel: [ 43.304423] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]May 22 01:32:11 ubuntu-890-base kernel: [ 43.841033] NET: Registered protocol family 17May 22 01:32:11 ubuntu-890-base kernel: [ 44.756859] loop: module loadedMay 22 01:32:11 ubuntu-890-base kernel: [ 44.776432] lp0: using parport0 (interrupt-driven).May 22 01:32:11 ubuntu-890-base kernel: [ 44.891814] Adding 1494004k swap on /dev/sda6. Priority:-1 extents:1 across:1494004kMay 22 01:32:11 ubuntu-890-base kernel: [ 45.452392] EXT3 FS on sda5, internal journalMay 22 01:32:11 ubuntu-890-base kernel: [ 46.627246] ip_tables: (C) 2000-2006 Netfilter Core TeamMay 22 01:32:11 ubuntu-890-base kernel: [ 47.285414] NET: Registered protocol family 10May 22 01:32:11 ubuntu-890-base kernel: [ 47.285649] lo: Disabled Privacy ExtensionsMay 22 01:32:11 ubuntu-890-base kernel: [ 47.415516] No dock devices found.May 22 01:32:11 ubuntu-890-base kernel: [ 47.822776] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)May 22 01:32:11 ubuntu-890-base kernel: [ 47.821609] powernow-k8: MP systems not supported by PSB BIOS structureMay 22 01:32:11 ubuntu-890-base kernel: [ 47.822821] powernow-k8: MP systems not supported by PSB BIOS structureMay 22 01:32:13 ubuntu-890-base kernel: [ 50.070286] audit(1242970333.477:2): type=1503 operation="capable" name="sys_resource" pid=5489 profile="/usr/sbin/named" namespace="default"May 22 01:32:19 ubuntu-890-base kernel: [ 56.136982] ppdev: user-space parallel port driverMay 22 01:32:19 ubuntu-890-base kernel: [ 56.212627] audit(1242970339.621:3): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5768 profile="/usr/sbin/cupsd" namespace="default"May 22 01:32:21 ubuntu-890-base kernel: [ 57.803524] eth2: no IPv6 routers presentMay 22 01:32:23 ubuntu-890-base kernel: [ 59.706236] eth1: no link during initialization.May 22 01:32:23 ubuntu-890-base kernel: [ 59.706676] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 22 01:32:23 ubuntu-890-base kernel: [ 59.757753] eth0: no link during initialization.May 22 01:32:23 ubuntu-890-base kernel: [ 59.758163] ADDRCONF(NETDEV_UP): eth0: link is not readyMay 22 01:32:23 ubuntu-890-base kernel: [ 59.788364] Bluetooth: Core ver 2.11May 22 01:32:23 ubuntu-890-base kernel: [ 59.789967] NET: Registered protocol family 31May 22 01:32:23 ubuntu-890-base kernel: [ 59.789972] Bluetooth: HCI device and connection manager initializedMay 22 01:32:23 ubuntu-890-base kernel: [ 59.789977] Bluetooth: HCI socket layer initializedMay 22 01:32:23 ubuntu-890-base kernel: [ 59.798023] Bluetooth: L2CAP ver 2.9May 22 01:32:23 ubuntu-890-base kernel: [ 59.798030] Bluetooth: L2CAP socket layer initializedMay 22 01:32:23 ubuntu-890-base kernel: [ 59.813268] Bluetooth: RFCOMM socket layer initializedMay 22 01:32:23 ubuntu-890-base kernel: [ 59.813289] Bluetooth: RFCOMM TTY layer initializedMay 22 01:32:23 ubuntu-890-base kernel: [ 59.813291] Bluetooth: RFCOMM ver 1.8May 22 01:33:11 ubuntu-890-base kernel: [ 108.153669] cdrom: sr0: mrw address space DMA selectedMay 22 01:33:11 ubuntu-890-base kernel: [ 108.307164] cdrom: sr0: mrw address space DMA selectedMay 22 01:33:13 ubuntu-890-base kernel: [ 109.690251] UDF-fs: No VRS foundMay 22 01:33:13 ubuntu-890-base kernel: [ 109.698749] ISO 9660 Extensions: Microsoft Joliet Level 3May 22 01:33:13 ubuntu-890-base kernel: [ 109.699667] ISOFS: changing to secondary rootMay 22 03:39:12 ubuntu-890-base kernel: [ 7656.170561] eth2: setting full-duplex.May 22 03:39:22 ubuntu-890-base kernel: [ 7666.932381] eth2: no IPv6 routers presentMay 22 05:21:37 ubuntu-890-base kernel: [13791.594389] May 22 05:21:37 ubuntu-890-base kernel: [13791.594397] floppy driver stateMay 22 05:21:37 ubuntu-890-base kernel: [13791.594398] -------------------May 22 05:21:37 ubuntu-890-base kernel: [13791.594400] now=4296316037 last interrupt=4294940449 diff=1375588 last called handler=ffffffff88165c60May 22 05:21:37 ubuntu-890-base kernel: [13791.594403] timeout_message=floppy startMay 22 05:21:37 ubuntu-890-base kernel: [13791.594404] last output bytes:May 22 05:21:37 ubuntu-890-base kernel: [13791.594405] 0 90 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594406] 1a 90 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594407] 0 90 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594408] 3 90 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594409] c1 90 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594410] 10 90 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594411] 7 80 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594412] 0 90 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594413] 8 81 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594414] 4 80 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594415] 0 90 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594416] e6 80 4296315739May 22 05:21:37 ubuntu-890-base kernel: [13791.594417] 0 90 4296315739May 22 05:21:37 ubuntu-890-base kernel: [13791.594418] 0 90 4296315739May 22 05:21:37 ubuntu-890-base kernel: [13791.594419] 0 90 4296315739May 22 05:21:37 ubuntu-890-base kernel: [13791.594420] 1 90 4296315739May 22 05:21:37 ubuntu-890-base kernel: [13791.594421] 2 90 4296315739May 22 05:21:37 ubuntu-890-base kernel: [13791.594422] 12 90 4296315739May 22 05:21:37 ubuntu-890-base kernel: [13791.594423] 1b 90 4296315739May 22 05:21:37 ubuntu-890-base kernel: [13791.594424] ff 90 4296315739May 22 05:21:37 ubuntu-890-base kernel: [13791.594425] last result at 4294940449May 22 05:21:37 ubuntu-890-base kernel: [13791.594426] last redo_fd_request at 4296315701May 22 05:21:37 ubuntu-890-base kernel: [13791.594427] May 22 05:21:37 ubuntu-890-base kernel: [13791.594437] status=50May 22 05:21:37 ubuntu-890-base kernel: [13791.594438] fdc_busy=1May 22 05:21:37 ubuntu-890-base kernel: [13791.594439] do_floppy=ffffffff88160b10May 22 05:21:37 ubuntu-890-base kernel: [13791.594440] fd_timer.function=ffffffff88161c30May 22 05:21:37 ubuntu-890-base kernel: [13791.594441] cont=ffffffff8816c340May 22 05:21:37 ubuntu-890-base kernel: [13791.594442] current_req=ffff81001b50cb40May 22 05:21:37 ubuntu-890-base kernel: [13791.594443] command_status=-1May 22 05:21:37 ubuntu-890-base kernel: [13791.594444] May 22 05:21:37 ubuntu-890-base kernel: [13791.594447] floppy0: floppy timeout calledMay 22 05:21:37 ubuntu-890-base kernel: [13791.594450] end_request: I/O error, dev fd0, sector 0May 22 05:21:40 ubuntu-890-base kernel: [13794.719192] May 22 05:21:40 ubuntu-890-base kernel: [13794.719199] floppy driver stateMay 22 05:21:40 ubuntu-890-base kernel: [13794.719200] -------------------May 22 05:21:40 ubuntu-890-base kernel: [13794.719202] now=4296316350 last interrupt=4296316050 diff=300 last called handler=ffffffff88165c60May 22 05:21:40 ubuntu-890-base kernel: [13794.719205] timeout_message=floppy startMay 22 05:21:40 ubuntu-890-base kernel: [13794.719205] last output bytes:May 22 05:21:40 ubuntu-890-base kernel: [13794.719207] 0 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719208] 13 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719209] 0 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719210] 1a 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719211] 0 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719212] 3 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719213] c1 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719214] 10 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719215] 7 80 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719216] 0 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719217] 8 81 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719218] e6 80 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719219] 0 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719220] 0 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719221] 0 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719222] 1 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719223] 2 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719224] 12 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719225] 1b 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719226] ff 90 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719227] last result at 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719228] last redo_fd_request at 4296316050May 22 05:21:40 ubuntu-890-base kernel: [13794.719229] 20 0 May 22 05:21:40 ubuntu-890-base kernel: [13794.719239] status=50May 22 05:21:40 ubuntu-890-base kernel: [13794.719240] fdc_busy=1May 22 05:21:40 ubuntu-890-base kernel: [13794.719241] do_floppy=ffffffff88160b10May 22 05:21:40 ubuntu-890-base kernel: [13794.719242] fd_timer.function=ffffffff88161c30May 22 05:21:40 ubuntu-890-base kernel: [13794.719243] cont=ffffffff8816c340May 22 05:21:40 ubuntu-890-base kernel: [13794.719244] current_req=ffff81001e4ac900May 22 05:21:40 ubuntu-890-base kernel: [13794.719245] command_status=-1May 22 05:21:40 ubuntu-890-base kernel: [13794.719246] May 22 05:21:40 ubuntu-890-base kernel: [13794.719249] floppy0: floppy timeout calledMay 22 05:21:40 ubuntu-890-base kernel: [13794.719252] end_request: I/O error, dev fd0, sector 0May 22 05:21:43 ubuntu-890-base kernel: [13797.711703] May 22 05:21:43 ubuntu-890-base kernel: [13797.711710] floppy driver stateMay 22 05:21:43 ubuntu-890-base kernel: [13797.711711] -------------------May 22 05:21:43 ubuntu-890-base kernel: [13797.711713] now=4296316650 last interrupt=4296316350 diff=300 last called handler=ffffffff88165c60May 22 05:21:43 ubuntu-890-base kernel: [13797.711715] timeout_message=floppy startMay 22 05:21:43 ubuntu-890-base kernel: [13797.711716] last output bytes:May 22 05:21:43 ubuntu-890-base kernel: [13797.711718] 0 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711719] 13 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711720] 0 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711721] 1a 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711722] 0 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711723] 3 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711724] c1 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711725] 10 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711726] 7 80 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711727] 0 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711728] 8 81 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711729] e6 80 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711730] 0 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711731] 0 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711732] 0 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711733] 1 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711733] 2 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711734] 12 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711735] 1b 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711736] ff 90 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711737] last result at 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711738] last redo_fd_request at 4296316350May 22 05:21:43 ubuntu-890-base kernel: [13797.711739] 20 0 May 22 05:21:43 ubuntu-890-base kernel: [13797.711750] status=50May 22 05:21:43 ubuntu-890-base kernel: [13797.711750] fdc_busy=1May 22 05:21:43 ubuntu-890-base kernel: [13797.711751] do_floppy=ffffffff88160b10May 22 05:21:43 ubuntu-890-base kernel: [13797.711753] fd_timer.function=ffffffff88161c30May 22 05:21:43 ubuntu-890-base kernel: [13797.711754] cont=ffffffff8816c340May 22 05:21:43 ubuntu-890-base kernel: [13797.711755] current_req=ffff81001e4ac900May 22 05:21:43 ubuntu-890-base kernel: [13797.711756] command_status=-1May 22 05:21:43 ubuntu-890-base kernel: [13797.711757] May 22 05:21:43 ubuntu-890-base kernel: [13797.711759] floppy0: floppy timeout calledMay 22 05:21:43 ubuntu-890-base kernel: [13797.711762] end_request: I/O error, dev fd0, sector 0May 22 05:21:43 ubuntu-890-base kernel: [13797.711766] Buffer I/O error on device fd0, logical block 0May 22 05:21:46 ubuntu-890-base kernel: [13800.706717] May 22 05:21:46 ubuntu-890-base kernel: [13800.706724] floppy driver stateMay 22 05:21:46 ubuntu-890-base kernel: [13800.706725] -------------------May 22 05:21:46 ubuntu-890-base kernel: [13800.706727] now=4296316950 last interrupt=4296316650 diff=300 last called handler=ffffffff88165c60May 22 05:21:46 ubuntu-890-base kernel: [13800.706729] timeout_message=floppy startMay 22 05:21:46 ubuntu-890-base kernel: [13800.706730] last output bytes:May 22 05:21:46 ubuntu-890-base kernel: [13800.706731] 0 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706733] 13 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706734] 0 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706735] 1a 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706736] 0 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706737] 3 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706738] c1 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706739] 10 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706740] 7 80 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706741] 0 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706742] 8 81 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706743] e6 80 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706744] 0 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706745] 0 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706745] 0 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706746] 1 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706747] 2 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706748] 12 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706749] 1b 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706750] ff 90 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706751] last result at 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706752] last redo_fd_request at 4296316650May 22 05:21:46 ubuntu-890-base kernel: [13800.706753] 20 0 May 22 05:21:46 ubuntu-890-base kernel: [13800.706763] status=50May 22 05:21:46 ubuntu-890-base kernel: [13800.706764] fdc_busy=1May 22 05:21:46 ubuntu-890-base kernel: [13800.706765] do_floppy=ffffffff88160b10May 22 05:21:46 ubuntu-890-base kernel: [13800.706766] fd_timer.function=ffffffff88161c30May 22 05:21:46 ubuntu-890-base kernel: [13800.706768] cont=ffffffff8816c340May 22 05:21:46 ubuntu-890-base kernel: [13800.706768] current_req=ffff81001e4ac6c0May 22 05:21:46 ubuntu-890-base kernel: [13800.706769] command_status=-1May 22 05:21:46 ubuntu-890-base kernel: [13800.706770] May 22 05:21:46 ubuntu-890-base kernel: [13800.706773] floppy0: floppy timeout calledMay 22 05:21:46 ubuntu-890-base kernel: [13800.706776] end_request: I/O error, dev fd0, sector 0May 22 05:21:46 ubuntu-890-base kernel: [13800.706780] Buffer I/O error on device fd0, logical block 0May 22 12:03:55 ubuntu-890-base kernel: Inspecting /boot/System.map-2.6.24-23-serverMay 22 12:03:55 ubuntu-890-base kernel: Loaded 28757 symbols from /boot/System.map-2.6.24-23-server.May 22 12:03:55 ubuntu-890-base kernel: Symbols match kernel version 2.6.24.May 22 12:03:55 ubuntu-890-base kernel: Loaded 18644 symbols from 86 modules.May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpusetMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpuMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Linux version 2.6.24-23-server (buildd@crested) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Nov 27 18:45:02 UTC 2008 (Ubuntu 2.6.24-23.46-server)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro quiet splashMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] BIOS-provided physical RAM map:May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee0000 - 000000001fee3000 (ACPI NVS)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee3000 - 000000001fef0000 (ACPI data)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fef0000 - 000000001ff00000 (reserved)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] end_pfn_map = 1048576May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] DMI 2.3 present.May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7D60 checksum 0May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP 000F7D60, 0014 (r0 Nvidia)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDT 1FEE3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: FACP 1FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: DSDT 1FEE3180, 906B (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: FACS 1FEE0000, 0040May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: MCFG 1FEEC300, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: APIC 1FEEC240, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] CPU has 2 num_coresMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] No NUMA configuration foundMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Faking a node at 0000000000000000-000000001fee0000May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-000000001fee0000May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Zone PFN ranges:May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] DMA 0 -> 4096May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] DMA32 4096 -> 1048576May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Normal 1048576 -> 1048576May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Movable zone start PFN for each nodeMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] early_node_map[2] active PFN rangesMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] 0: 0 -> 159May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] 0: 256 -> 130784May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] On node 0 totalpages: 130687May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] DMA zone: 56 pages used for memmapMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] DMA zone: 1322 pages reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] DMA zone: 2621 pages, LIFO batch:0May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 1732 pages used for memmapMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 124956 pages, LIFO batch:31May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Normal zone: 0 pages used for memmapMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Movable zone: 0 pages used for memmapMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_overrideMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Processor #0 (Bootup-CPU)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Processor #1May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ9 used by override.May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ14 used by override.May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ15 used by override.May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Setting APIC routing to flatMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:d0100000)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUsMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] PERCPU: Allocating 41952 bytes of per cpu dataMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 127577May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Policy zone: DMA32May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Kernel command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro quiet splashMay 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] Initializing CPU#0May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)May 22 12:03:55 ubuntu-890-base kernel: [ 0.000000] TSC calibrated against PM_TIMERMay 22 12:03:55 ubuntu-890-base kernel: [ 19.890038] Marking TSC unstable due to TSCs unsynchronizedMay 22 12:03:55 ubuntu-890-base kernel: [ 19.890040] time.c: Detected 2411.111 MHz processor.May 22 12:03:55 ubuntu-890-base kernel: [ 19.891409] Console: colour VGA+ 80x25May 22 12:03:55 ubuntu-890-base kernel: [ 19.891413] console [tty0] enabledMay 22 12:03:55 ubuntu-890-base kernel: [ 19.891427] Checking aperture...May 22 12:03:55 ubuntu-890-base kernel: [ 19.891429] CPU 0: aperture @ a332000000 size 32 MBMay 22 12:03:55 ubuntu-890-base kernel: [ 19.891431] Aperture too small (32 MB)May 22 12:03:55 ubuntu-890-base kernel: [ 19.896092] No AGP bridge foundMay 22 12:03:55 ubuntu-890-base kernel: [ 19.901521] Memory: 502556k/523136k available (2525k kernel code, 20192k reserved, 1330k data, 328k init)May 22 12:03:55 ubuntu-890-base kernel: [ 19.901560] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1May 22 12:03:55 ubuntu-890-base kernel: [ 20.049760] Calibrating delay using timer specific routine.. 4825.25 BogoMIPS (lpj=24126289)May 22 12:03:55 ubuntu-890-base kernel: [ 20.049793] Security Framework initializedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.049800] SELinux: Disabled at boot.May 22 12:03:55 ubuntu-890-base kernel: [ 20.049813] AppArmor: AppArmor initializedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.049816] Failure registering capabilities with primary security module.May 22 12:03:55 ubuntu-890-base kernel: [ 20.049863] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)May 22 12:03:55 ubuntu-890-base kernel: [ 20.050236] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)May 22 12:03:55 ubuntu-890-base kernel: [ 20.050433] Mount-cache hash table entries: 256May 22 12:03:55 ubuntu-890-base kernel: [ 20.050581] Initializing cgroup subsys nsMay 22 12:03:55 ubuntu-890-base kernel: [ 20.050586] Initializing cgroup subsys cpuacctMay 22 12:03:55 ubuntu-890-base kernel: [ 20.050597] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 22 12:03:55 ubuntu-890-base kernel: [ 20.050599] CPU: L2 Cache: 512K (64 bytes/line)May 22 12:03:55 ubuntu-890-base kernel: [ 20.050601] CPU 0/0 -> Node 0May 22 12:03:55 ubuntu-890-base kernel: [ 20.050603] CPU: Physical Processor ID: 0May 22 12:03:55 ubuntu-890-base kernel: [ 20.050604] CPU: Processor Core ID: 0May 22 12:03:55 ubuntu-890-base kernel: [ 20.050628] SMP alternatives: switching to UP codeMay 22 12:03:55 ubuntu-890-base kernel: [ 20.051242] Early unpacking initramfs... doneMay 22 12:03:55 ubuntu-890-base kernel: [ 20.323856] ACPI: Core revision 20070126May 22 12:03:55 ubuntu-890-base kernel: [ 20.323920] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.May 22 12:03:55 ubuntu-890-base kernel: [ 20.431052] Using local APIC timer interrupts.May 22 12:03:55 ubuntu-890-base kernel: [ 20.472463] APIC timer calibration result 12557857May 22 12:03:55 ubuntu-890-base kernel: [ 20.472464] Detected 12.557 MHz APIC timer.May 22 12:03:55 ubuntu-890-base kernel: [ 20.472575] SMP alternatives: switching to SMP codeMay 22 12:03:55 ubuntu-890-base kernel: [ 20.473100] Booting processor 1/2 APIC 0x1May 22 12:03:55 ubuntu-890-base kernel: [ 20.483535] Initializing CPU#1May 22 12:03:55 ubuntu-890-base kernel: [ 20.632607] Calibrating delay using timer specific routine.. 4822.26 BogoMIPS (lpj=24111318)May 22 12:03:55 ubuntu-890-base kernel: [ 20.632613] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 22 12:03:55 ubuntu-890-base kernel: [ 20.632614] CPU: L2 Cache: 512K (64 bytes/line)May 22 12:03:55 ubuntu-890-base kernel: [ 20.632616] CPU 1/1 -> Node 0May 22 12:03:55 ubuntu-890-base kernel: [ 20.632618] CPU: Physical Processor ID: 0May 22 12:03:55 ubuntu-890-base kernel: [ 20.632619] CPU: Processor Core ID: 1May 22 12:03:55 ubuntu-890-base kernel: [ 20.632693] AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02May 22 12:03:55 ubuntu-890-base kernel: [ 20.632384] Brought up 2 CPUsMay 22 12:03:55 ubuntu-890-base kernel: [ 20.632490] CPU0 attaching sched-domain:May 22 12:03:55 ubuntu-890-base kernel: [ 20.632493] domain 0: span 00000000,00000003May 22 12:03:55 ubuntu-890-base kernel: [ 20.632495] groups: 00000000,00000001 00000000,00000002May 22 12:03:55 ubuntu-890-base kernel: [ 20.632498] domain 1: span 00000000,00000003May 22 12:03:55 ubuntu-890-base kernel: [ 20.632499] groups: 00000000,00000003May 22 12:03:55 ubuntu-890-base kernel: [ 20.632501] CPU1 attaching sched-domain:May 22 12:03:55 ubuntu-890-base kernel: [ 20.632502] domain 0: span 00000000,00000003May 22 12:03:55 ubuntu-890-base kernel: [ 20.632504] groups: 00000000,00000002 00000000,00000001May 22 12:03:55 ubuntu-890-base kernel: [ 20.632506] domain 1: span 00000000,00000003May 22 12:03:55 ubuntu-890-base kernel: [ 20.632508] groups: 00000000,00000003May 22 12:03:55 ubuntu-890-base kernel: [ 20.632826] net_namespace: 120 bytesMay 22 12:03:55 ubuntu-890-base kernel: [ 20.633195] Time: 12:03:25 Date: 05/22/09May 22 12:03:55 ubuntu-890-base kernel: [ 20.633229] NET: Registered protocol family 16May 22 12:03:55 ubuntu-890-base kernel: [ 20.633412] ACPI: bus type pci registeredMay 22 12:03:55 ubuntu-890-base kernel: [ 20.633499] PCI: Using configuration type 1May 22 12:03:55 ubuntu-890-base kernel: [ 20.635080] ACPI: EC: Look up EC in DSDTMay 22 12:03:55 ubuntu-890-base kernel: [ 20.642804] ACPI: Interpreter enabledMay 22 12:03:55 ubuntu-890-base kernel: [ 20.642806] ACPI: (supports S0 S1 S3 S4 S5)May 22 12:03:55 ubuntu-890-base kernel: [ 20.642821] ACPI: Using IOAPIC for interrupt routingMay 22 12:03:55 ubuntu-890-base kernel: [ 20.653658] ACPI: PCI Root Bridge [PCI0] (0000:00)May 22 12:03:55 ubuntu-890-base kernel: [ 20.654341] PCI: Transparent bridge - 0000:00:06.0May 22 12:03:55 ubuntu-890-base kernel: [ 20.654771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]May 22 12:03:55 ubuntu-890-base kernel: [ 20.655165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]May 22 12:03:55 ubuntu-890-base kernel: [ 20.752950] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.753154] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.753352] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.753550] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.753748] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.753947] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.754146] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.754344] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.754542] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.754744] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.754943] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.755142] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.755344] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.755542] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.755741] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.755940] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.756138] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.756338] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.756537] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.756736] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)May 22 12:03:55 ubuntu-890-base kernel: [ 20.756969] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.757193] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.757416] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.757639] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.757861] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.758084] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.758307] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.758530] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.758755] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.758980] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.759205] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.759429] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.759654] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.759879] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.760104] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.760334] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.760558] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.760782] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.761006] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.761230] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0May 22 12:03:55 ubuntu-890-base kernel: [ 20.761370] Linux Plug and Play Support v0.97 (c) Adam BelayMay 22 12:03:55 ubuntu-890-base kernel: [ 20.761399] pnp: PnP ACPI initMay 22 12:03:55 ubuntu-890-base kernel: [ 20.761407] ACPI: bus type pnp registeredMay 22 12:03:55 ubuntu-890-base kernel: [ 20.767161] pnpacpi: exceeded the max number of mem resources: 12May 22 12:03:55 ubuntu-890-base kernel: [ 20.767274] pnp: PnP ACPI: found 13 devicesMay 22 12:03:55 ubuntu-890-base kernel: [ 20.767276] ACPI: ACPI bus type pnp unregisteredMay 22 12:03:55 ubuntu-890-base kernel: [ 20.767495] PCI: Using ACPI for IRQ routingMay 22 12:03:55 ubuntu-890-base kernel: [ 20.767499] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportMay 22 12:03:55 ubuntu-890-base kernel: [ 20.801978] NET: Registered protocol family 8May 22 12:03:55 ubuntu-890-base kernel: [ 20.801980] NET: Registered protocol family 20May 22 12:03:55 ubuntu-890-base kernel: [ 20.802003] NetLabel: InitializingMay 22 12:03:55 ubuntu-890-base kernel: [ 20.802004] NetLabel: domain hash size = 128May 22 12:03:55 ubuntu-890-base kernel: [ 20.802005] NetLabel: protocols = UNLABELED CIPSOv4May 22 12:03:55 ubuntu-890-base kernel: [ 20.802018] NetLabel: unlabeled traffic allowed by defaultMay 22 12:03:55 ubuntu-890-base kernel: [ 20.802127] AppArmor: AppArmor Filesystem EnabledMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831920] system 00:01: ioport range 0x1000-0x107f has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831922] system 00:01: ioport range 0x1080-0x10ff has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831924] system 00:01: ioport range 0x1400-0x147f has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831926] system 00:01: ioport range 0x1480-0x14ff has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831928] system 00:01: ioport range 0x1800-0x187f has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831930] system 00:01: ioport range 0x1880-0x18ff has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831936] system 00:02: ioport range 0x4d0-0x4d1 has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831938] system 00:02: ioport range 0x800-0x87f has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831940] system 00:02: ioport range 0x290-0x297 has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831951] system 00:0b: iomem range 0x0-0x0 could not be reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831956] system 00:0c: iomem range 0xd5800-0xd7fff has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831958] system 00:0c: iomem range 0xf0000-0xf7fff could not be reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831960] system 00:0c: iomem range 0xf8000-0xfbfff could not be reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831962] system 00:0c: iomem range 0xfc000-0xfffff could not be reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831964] system 00:0c: iomem range 0x1fee0000-0x1fefffff could not be reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831967] system 00:0c: iomem range 0xffff0000-0xffffffff has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831972] system 00:0c: iomem range 0x0-0x9ffff could not be reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831974] system 00:0c: iomem range 0x100000-0x1fedffff could not be reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831976] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831978] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831980] system 00:0c: iomem range 0xfefff000-0xfeffffff has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.831982] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reservedMay 22 12:03:55 ubuntu-890-base kernel: [ 20.832333] PCI: Bridge: 0000:00:06.0May 22 12:03:55 ubuntu-890-base kernel: [ 20.832335] IO window: 9000-9fffMay 22 12:03:55 ubuntu-890-base kernel: [ 20.832337] MEM window: fde00000-fdefffffMay 22 12:03:55 ubuntu-890-base kernel: [ 20.832339] PREFETCH window: fd000000-fd7fffffMay 22 12:03:55 ubuntu-890-base kernel: [ 20.832341] PCI: Bridge: 0000:00:0a.0May 22 12:03:55 ubuntu-890-base kernel: [ 20.832342] IO window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832344] MEM window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832345] PREFETCH window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832347] PCI: Bridge: 0000:00:0b.0May 22 12:03:55 ubuntu-890-base kernel: [ 20.832348] IO window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832349] MEM window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832351] PREFETCH window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832352] PCI: Bridge: 0000:00:0c.0May 22 12:03:55 ubuntu-890-base kernel: [ 20.832353] IO window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832355] MEM window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832356] PREFETCH window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832358] PCI: Bridge: 0000:00:0d.0May 22 12:03:55 ubuntu-890-base kernel: [ 20.832359] IO window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832360] MEM window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832362] PREFETCH window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832363] PCI: Bridge: 0000:00:0e.0May 22 12:03:55 ubuntu-890-base kernel: [ 20.832365] IO window: 7000-8fffMay 22 12:03:55 ubuntu-890-base kernel: [ 20.832366] MEM window: fdd00000-fddfffffMay 22 12:03:55 ubuntu-890-base kernel: [ 20.832368] PREFETCH window: disabled.May 22 12:03:55 ubuntu-890-base kernel: [ 20.832370] PCI: Bridge: 0000:00:0f.0May 22 12:03:55 ubuntu-890-base kernel: [ 20.832371] IO window: 6000-6fffMay 22 12:03:55 ubuntu-890-base kernel: [ 20.832373] MEM window: fa000000-fcffffffMay 22 12:03:55 ubuntu-890-base kernel: [ 20.832374] PREFETCH window: e0000000-efffffffMay 22 12:03:55 ubuntu-890-base kernel: [ 20.832383] PCI: Setting latency timer of device 0000:00:06.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 20.832392] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 20.832398] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 20.832403] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 20.832409] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 20.832414] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 20.832419] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 20.832430] NET: Registered protocol family 2May 22 12:03:55 ubuntu-890-base kernel: [ 20.841872] Time: acpi_pm clocksource has been installed.May 22 12:03:55 ubuntu-890-base kernel: [ 20.841889] Switched to high resolution mode on CPU 0May 22 12:03:55 ubuntu-890-base kernel: [ 20.842392] Switched to high resolution mode on CPU 1May 22 12:03:55 ubuntu-890-base kernel: [ 20.921945] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)May 22 12:03:55 ubuntu-890-base kernel: [ 20.922151] TCP established hash table entries: 16384 (order: 6, 262144 bytes)May 22 12:03:55 ubuntu-890-base kernel: [ 20.922342] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)May 22 12:03:55 ubuntu-890-base kernel: [ 20.922518] TCP: Hash tables configured (established 16384 bind 16384)May 22 12:03:55 ubuntu-890-base kernel: [ 20.922520] TCP reno registeredMay 22 12:03:55 ubuntu-890-base kernel: [ 20.951836] checking if image is initramfs... it isMay 22 12:03:55 ubuntu-890-base kernel: [ 21.481411] Freeing initrd memory: 7583k freedMay 22 12:03:55 ubuntu-890-base kernel: [ 21.488195] audit: initializing netlink socket (disabled)May 22 12:03:55 ubuntu-890-base kernel: [ 21.488209] audit(1242993805.580:1): initializedMay 22 12:03:55 ubuntu-890-base kernel: [ 21.488331] Total HugeTLB memory allocated, 0May 22 12:03:55 ubuntu-890-base kernel: [ 21.489937] VFS: Disk quotas dquot_6.5.1May 22 12:03:55 ubuntu-890-base kernel: [ 21.490009] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)May 22 12:03:55 ubuntu-890-base kernel: [ 21.490179] io scheduler noop registeredMay 22 12:03:55 ubuntu-890-base kernel: [ 21.490181] io scheduler anticipatory registeredMay 22 12:03:55 ubuntu-890-base kernel: [ 21.490183] io scheduler deadline registered (default)May 22 12:03:55 ubuntu-890-base kernel: [ 21.490267] io scheduler cfq registeredMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511106] pci 0000:00:05.0: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511122] pci 0000:00:05.1: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511135] pci 0000:00:05.2: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511147] pci 0000:00:06.0: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511160] pci 0000:00:06.1: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511175] pci 0000:00:08.0: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511189] pci 0000:00:09.0: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511202] pci 0000:00:0a.0: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511215] pci 0000:00:0b.0: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511227] pci 0000:00:0c.0: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511240] pci 0000:00:0d.0: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511253] pci 0000:00:0e.0: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511266] pci 0000:00:0f.0: Enabling HT MSI MappingMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511287] Boot video device is 0000:07:00.0May 22 12:03:55 ubuntu-890-base kernel: [ 21.511454] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 21.511473] assign_interrupt_mode Found MSI capabilityMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511491] Allocate Port Service[0000:00:0a.0:pcie00]May 22 12:03:55 ubuntu-890-base kernel: [ 21.511546] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 21.511564] assign_interrupt_mode Found MSI capabilityMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511576] Allocate Port Service[0000:00:0b.0:pcie00]May 22 12:03:55 ubuntu-890-base kernel: [ 21.511625] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 21.511643] assign_interrupt_mode Found MSI capabilityMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511656] Allocate Port Service[0000:00:0c.0:pcie00]May 22 12:03:55 ubuntu-890-base kernel: [ 21.511706] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 21.511724] assign_interrupt_mode Found MSI capabilityMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511736] Allocate Port Service[0000:00:0d.0:pcie00]May 22 12:03:55 ubuntu-890-base kernel: [ 21.511787] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 21.511805] assign_interrupt_mode Found MSI capabilityMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511817] Allocate Port Service[0000:00:0e.0:pcie00]May 22 12:03:55 ubuntu-890-base kernel: [ 21.511864] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 21.511882] assign_interrupt_mode Found MSI capabilityMay 22 12:03:55 ubuntu-890-base kernel: [ 21.511894] Allocate Port Service[0000:00:0f.0:pcie00]May 22 12:03:55 ubuntu-890-base kernel: [ 21.534925] Real Time Clock Driver v1.12acMay 22 12:03:55 ubuntu-890-base kernel: [ 21.535029] Linux agpgart interface v0.102May 22 12:03:55 ubuntu-890-base kernel: [ 21.535031] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledMay 22 12:03:55 ubuntu-890-base kernel: [ 21.535184] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 22 12:03:55 ubuntu-890-base kernel: [ 21.535699] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 22 12:03:55 ubuntu-890-base kernel: [ 21.536366] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeMay 22 12:03:55 ubuntu-890-base kernel: [ 21.536430] input: Macintosh mouse button emulation as /devices/virtual/input/input0May 22 12:03:55 ubuntu-890-base kernel: [ 21.536511] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1May 22 12:03:55 ubuntu-890-base kernel: [ 21.536513] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnpMay 22 12:03:55 ubuntu-890-base kernel: [ 21.536611] serio: i8042 KBD port at 0x60,0x64 irq 1May 22 12:03:55 ubuntu-890-base kernel: [ 21.571028] mice: PS/2 mouse device common for all miceMay 22 12:03:55 ubuntu-890-base kernel: [ 21.571070] cpuidle: using governor ladderMay 22 12:03:55 ubuntu-890-base kernel: [ 21.571072] cpuidle: using governor menuMay 22 12:03:55 ubuntu-890-base kernel: [ 21.571222] NET: Registered protocol family 1May 22 12:03:55 ubuntu-890-base kernel: [ 21.571323] registered taskstats version 1May 22 12:03:55 ubuntu-890-base kernel: [ 21.571497] Magic number: 9:431:77May 22 12:03:55 ubuntu-890-base kernel: [ 21.571636] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)May 22 12:03:55 ubuntu-890-base kernel: [ 21.571639] BIOS EDD facility v0.16 2004-Jun-25, 6 devices foundMay 22 12:03:55 ubuntu-890-base kernel: [ 21.571833] Freeing unused kernel memory: 328k freedMay 22 12:03:55 ubuntu-890-base kernel: [ 21.572294] Write protecting the kernel read-only data: 1044kMay 22 12:03:55 ubuntu-890-base kernel: [ 21.597401] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1May 22 12:03:55 ubuntu-890-base kernel: [ 22.757171] fuse init (API version 7.9)May 22 12:03:55 ubuntu-890-base kernel: [ 22.769047] ACPI: Fan [FAN] (on)May 22 12:03:55 ubuntu-890-base kernel: [ 22.775263] ACPI: Thermal Zone [THRM] (40 C)May 22 12:03:55 ubuntu-890-base kernel: [ 23.125345] usbcore: registered new interface driver usbfsMay 22 12:03:55 ubuntu-890-base kernel: [ 23.125369] usbcore: registered new interface driver hubMay 22 12:03:55 ubuntu-890-base kernel: [ 23.125588] SCSI subsystem initializedMay 22 12:03:55 ubuntu-890-base kernel: [ 23.126591] usbcore: registered new device driver usbMay 22 12:03:55 ubuntu-890-base kernel: [ 23.126676] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.May 22 12:03:55 ubuntu-890-base kernel: [ 23.127088] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23May 22 12:03:55 ubuntu-890-base kernel: [ 23.127099] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23May 22 12:03:55 ubuntu-890-base kernel: [ 23.127104] PCI: Setting latency timer of device 0000:00:08.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 23.152501] libata version 3.00 loaded.May 22 12:03:55 ubuntu-890-base kernel: [ 23.167165] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverMay 22 12:03:55 ubuntu-890-base kernel: [ 23.240758] Floppy drive(s): fd0 is 1.44MMay 22 12:03:55 ubuntu-890-base kernel: [ 23.261918] FDC 0 is a post-1991 82077May 22 12:03:55 ubuntu-890-base kernel: [ 23.647671] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:f2:20May 22 12:03:55 ubuntu-890-base kernel: [ 23.647676] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 22 12:03:55 ubuntu-890-base kernel: [ 23.648125] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 22May 22 12:03:55 ubuntu-890-base kernel: [ 23.648136] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AMC1] -> GSI 22 (level, low) -> IRQ 22May 22 12:03:55 ubuntu-890-base kernel: [ 23.648140] PCI: Setting latency timer of device 0000:00:09.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 24.176789] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:fd:c5May 22 12:03:55 ubuntu-890-base kernel: [ 24.176794] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 22 12:03:55 ubuntu-890-base kernel: [ 24.177371] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21May 22 12:03:55 ubuntu-890-base kernel: [ 24.177382] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 21May 22 12:03:55 ubuntu-890-base kernel: [ 24.177544] PCI: Setting latency timer of device 0000:00:02.1 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 24.177550] ehci_hcd 0000:00:02.1: EHCI Host ControllerMay 22 12:03:55 ubuntu-890-base kernel: [ 24.177864] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1May 22 12:03:55 ubuntu-890-base kernel: [ 24.177896] ehci_hcd 0000:00:02.1: debug port 1May 22 12:03:55 ubuntu-890-base kernel: [ 24.177899] PCI: cache line size of 64 is not supported by device 0000:00:02.1May 22 12:03:55 ubuntu-890-base kernel: [ 24.177912] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000May 22 12:03:55 ubuntu-890-base kernel: [ 24.196316] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004May 22 12:03:55 ubuntu-890-base kernel: [ 24.196453] usb usb1: configuration #1 chosen from 1 choiceMay 22 12:03:55 ubuntu-890-base kernel: [ 24.196475] hub 1-0:1.0: USB hub foundMay 22 12:03:55 ubuntu-890-base kernel: [ 24.196482] hub 1-0:1.0: 10 ports detectedMay 22 12:03:55 ubuntu-890-base kernel: [ 24.317076] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17May 22 12:03:55 ubuntu-890-base kernel: [ 24.317093] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17May 22 12:03:55 ubuntu-890-base kernel: [ 24.317269] 3c59x: Donald Becker and others.May 22 12:03:55 ubuntu-890-base kernel: [ 24.317285] 0000:01:07.0: 3Com PCI 3c905C Tornado at ffffc20000176000.May 22 12:03:55 ubuntu-890-base kernel: [ 24.317220] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20May 22 12:03:55 ubuntu-890-base kernel: [ 24.317233] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 20May 22 12:03:55 ubuntu-890-base kernel: [ 24.317345] PCI: Setting latency timer of device 0000:00:02.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 24.317351] ohci_hcd 0000:00:02.0: OHCI Host ControllerMay 22 12:03:55 ubuntu-890-base kernel: [ 24.317407] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2May 22 12:03:55 ubuntu-890-base kernel: [ 24.317426] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000May 22 12:03:55 ubuntu-890-base kernel: [ 24.378119] usb usb2: configuration #1 chosen from 1 choiceMay 22 12:03:55 ubuntu-890-base kernel: [ 24.378143] hub 2-0:1.0: USB hub foundMay 22 12:03:55 ubuntu-890-base kernel: [ 24.378151] hub 2-0:1.0: 10 ports detectedMay 22 12:03:55 ubuntu-890-base kernel: [ 24.476147] PCI: Setting latency timer of device 0000:00:04.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 24.476566] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23May 22 12:03:55 ubuntu-890-base kernel: [ 24.476569] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23May 22 12:03:55 ubuntu-890-base kernel: [ 24.476585] PCI: Setting latency timer of device 0000:00:05.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 24.476591] ACPI: PCI interrupt for device 0000:00:05.0 disabledMay 22 12:03:55 ubuntu-890-base kernel: [ 24.476923] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22May 22 12:03:55 ubuntu-890-base kernel: [ 24.476925] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22May 22 12:03:55 ubuntu-890-base kernel: [ 24.476939] PCI: Setting latency timer of device 0000:00:05.1 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 24.476945] ACPI: PCI interrupt for device 0000:00:05.1 disabledMay 22 12:03:55 ubuntu-890-base kernel: [ 24.477275] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21May 22 12:03:55 ubuntu-890-base kernel: [ 24.477276] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21May 22 12:03:55 ubuntu-890-base kernel: [ 24.477290] PCI: Setting latency timer of device 0000:00:05.2 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 24.477296] ACPI: PCI interrupt for device 0000:00:05.2 disabledMay 22 12:03:55 ubuntu-890-base kernel: [ 24.477320] PCI: Enabling device 0000:06:00.1 (0000 -> 0001)May 22 12:03:55 ubuntu-890-base kernel: [ 24.477636] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16May 22 12:03:55 ubuntu-890-base kernel: [ 24.477644] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 22 12:03:55 ubuntu-890-base kernel: [ 24.477664] PCI: Setting latency timer of device 0000:06:00.1 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 24.477673] ACPI: PCI interrupt for device 0000:06:00.1 disabledMay 22 12:03:55 ubuntu-890-base kernel: [ 24.478095] ahci 0000:06:00.0: version 3.0May 22 12:03:55 ubuntu-890-base kernel: [ 24.478560] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16May 22 12:03:55 ubuntu-890-base kernel: [ 24.478565] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16May 22 12:03:55 ubuntu-890-base kernel: [ 24.805303] usb 1-4: new high speed USB device using ehci_hcd and address 3May 22 12:03:55 ubuntu-890-base kernel: [ 24.957371] usb 1-4: configuration #1 chosen from 1 choiceMay 22 12:03:55 ubuntu-890-base kernel: [ 25.294878] usb 2-3: new low speed USB device using ohci_hcd and address 2May 22 12:03:55 ubuntu-890-base kernel: [ 25.487071] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA modeMay 22 12:03:55 ubuntu-890-base kernel: [ 25.487076] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part May 22 12:03:55 ubuntu-890-base kernel: [ 25.487081] PCI: Setting latency timer of device 0000:06:00.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 25.488322] scsi0 : ahciMay 22 12:03:55 ubuntu-890-base kernel: [ 25.488934] scsi1 : ahciMay 22 12:03:55 ubuntu-890-base kernel: [ 25.488964] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16May 22 12:03:55 ubuntu-890-base kernel: [ 25.488967] ata2: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16May 22 12:03:55 ubuntu-890-base kernel: [ 25.524602] usb 2-3: configuration #1 chosen from 1 choiceMay 22 12:03:55 ubuntu-890-base kernel: [ 25.532259] usbcore: registered new interface driver libusualMay 22 12:03:55 ubuntu-890-base kernel: [ 25.532658] usbcore: registered new interface driver hiddevMay 22 12:03:55 ubuntu-890-base kernel: [ 25.534156] hiddev96hidraw0: USB HID v1.00 Device [Lexmark 6500 Series] on usb-0000:00:02.1-4May 22 12:03:55 ubuntu-890-base kernel: [ 25.539699] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2May 22 12:03:55 ubuntu-890-base kernel: [ 25.541656] Initializing USB Mass Storage driver...May 22 12:03:55 ubuntu-890-base kernel: [ 25.542070] scsi2 : SCSI emulation for USB Mass Storage devicesMay 22 12:03:55 ubuntu-890-base kernel: [ 25.542135] usb-storage: device found at 3May 22 12:03:55 ubuntu-890-base kernel: [ 25.542137] usb-storage: waiting for device to settle before scanningMay 22 12:03:55 ubuntu-890-base kernel: [ 25.596990] input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3May 22 12:03:55 ubuntu-890-base kernel: [ 25.604444] hiddev97hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-3May 22 12:03:55 ubuntu-890-base kernel: [ 25.604100] usbcore: registered new interface driver usb-storageMay 22 12:03:55 ubuntu-890-base kernel: [ 25.604106] USB Mass Storage support registered.May 22 12:03:55 ubuntu-890-base kernel: [ 25.605417] usbcore: registered new interface driver usbhidMay 22 12:03:55 ubuntu-890-base kernel: [ 25.605422] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driverMay 22 12:03:55 ubuntu-890-base kernel: [ 25.836481] ata1: SATA link down (SStatus 0 SControl 300)May 22 12:03:55 ubuntu-890-base kernel: [ 26.183408] ata2: SATA link down (SStatus 0 SControl 300)May 22 12:03:55 ubuntu-890-base kernel: [ 26.183511] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19May 22 12:03:55 ubuntu-890-base kernel: [ 26.183524] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19May 22 12:03:55 ubuntu-890-base kernel: [ 26.233637] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8]May 22 12:03:55 ubuntu-890-base kernel: [ 26.236245] sata_nv 0000:00:05.0: version 3.5May 22 12:03:55 ubuntu-890-base kernel: [ 26.236262] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23May 22 12:03:55 ubuntu-890-base kernel: [ 26.236499] PCI: Setting latency timer of device 0000:00:05.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 26.236593] scsi3 : sata_nvMay 22 12:03:55 ubuntu-890-base kernel: [ 26.236663] scsi4 : sata_nvMay 22 12:03:55 ubuntu-890-base kernel: [ 26.236852] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23May 22 12:03:55 ubuntu-890-base kernel: [ 26.236854] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23May 22 12:03:55 ubuntu-890-base kernel: [ 26.722117] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)May 22 12:03:55 ubuntu-890-base kernel: [ 26.766668] ata3.00: ATA-7: WDC WD2500JS-00SGB0, 20.06C03, max UDMA/133May 22 12:03:55 ubuntu-890-base kernel: [ 26.766672] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)May 22 12:03:55 ubuntu-890-base kernel: [ 26.782694] ata3.00: configured for UDMA/133May 22 12:03:55 ubuntu-890-base kernel: [ 27.111466] ata4: SATA link down (SStatus 0 SControl 300)May 22 12:03:55 ubuntu-890-base kernel: [ 27.121843] scsi 3:0:0:0: Direct-Access ATA WDC WD2500JS-00S 20.0 PQ: 0 ANSI: 5May 22 12:03:55 ubuntu-890-base kernel: [ 27.121931] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22May 22 12:03:55 ubuntu-890-base kernel: [ 27.122171] PCI: Setting latency timer of device 0000:00:05.1 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 27.122815] scsi5 : sata_nvMay 22 12:03:55 ubuntu-890-base kernel: [ 27.122888] scsi6 : sata_nvMay 22 12:03:55 ubuntu-890-base kernel: [ 27.123078] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22May 22 12:03:55 ubuntu-890-base kernel: [ 27.123081] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22May 22 12:03:55 ubuntu-890-base kernel: [ 27.450899] ata5: SATA link down (SStatus 0 SControl 300)May 22 12:03:55 ubuntu-890-base kernel: [ 27.543724] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7a6f6]May 22 12:03:55 ubuntu-890-base kernel: [ 27.790327] ata6: SATA link down (SStatus 0 SControl 300)May 22 12:03:55 ubuntu-890-base kernel: [ 27.800650] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21May 22 12:03:55 ubuntu-890-base kernel: [ 27.800874] PCI: Setting latency timer of device 0000:00:05.2 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 27.800968] scsi7 : sata_nvMay 22 12:03:55 ubuntu-890-base kernel: [ 27.801037] scsi8 : sata_nvMay 22 12:03:55 ubuntu-890-base kernel: [ 27.801231] ata7: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21May 22 12:03:55 ubuntu-890-base kernel: [ 27.801234] ata8: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21May 22 12:03:55 ubuntu-890-base kernel: [ 28.129771] ata7: SATA link down (SStatus 0 SControl 300)May 22 12:03:55 ubuntu-890-base kernel: [ 28.469198] ata8: SATA link down (SStatus 0 SControl 300)May 22 12:03:55 ubuntu-890-base kernel: [ 28.479931] pata_amd 0000:00:04.0: version 0.3.10May 22 12:03:55 ubuntu-890-base kernel: [ 28.479978] PCI: Setting latency timer of device 0000:00:04.0 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 28.480037] scsi9 : pata_amdMay 22 12:03:55 ubuntu-890-base kernel: [ 28.480567] scsi10 : pata_amdMay 22 12:03:55 ubuntu-890-base kernel: [ 28.481206] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14May 22 12:03:55 ubuntu-890-base kernel: [ 28.481208] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15May 22 12:03:55 ubuntu-890-base kernel: [ 29.018517] ata9.01: ATAPI: LITE-ON LTR-52327S, QS06, max UDMA/33May 22 12:03:55 ubuntu-890-base kernel: [ 29.218119] ata9.01: configured for UDMA/33May 22 12:03:55 ubuntu-890-base kernel: [ 29.218158] ata10: port disabled. ignoring.May 22 12:03:55 ubuntu-890-base kernel: [ 29.232349] scsi 9:0:1:0: CD-ROM LITE-ON LTR-52327S QS06 PQ: 0 ANSI: 5May 22 12:03:55 ubuntu-890-base kernel: [ 29.233617] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 22 12:03:55 ubuntu-890-base kernel: [ 29.233657] PCI: Setting latency timer of device 0000:06:00.1 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 29.234655] scsi11 : pata_jmicronMay 22 12:03:55 ubuntu-890-base kernel: [ 29.234996] scsi12 : pata_jmicronMay 22 12:03:55 ubuntu-890-base kernel: [ 29.235024] ata11: PATA max UDMA/100 cmd 0x8c00 ctl 0x8800 bmdma 0x7c00 irq 16May 22 12:03:55 ubuntu-890-base kernel: [ 29.235026] ata12: PATA max UDMA/100 cmd 0x8400 ctl 0x8000 bmdma 0x7c08 irq 16May 22 12:03:55 ubuntu-890-base kernel: [ 29.239526] Driver 'sd' needs updating - please use bus_type methodsMay 22 12:03:55 ubuntu-890-base kernel: [ 29.239619] sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 22 12:03:55 ubuntu-890-base kernel: [ 29.239630] sd 3:0:0:0: [sda] Write Protect is offMay 22 12:03:55 ubuntu-890-base kernel: [ 29.239632] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00May 22 12:03:55 ubuntu-890-base kernel: [ 29.239645] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 22 12:03:55 ubuntu-890-base kernel: [ 29.239692] sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 22 12:03:55 ubuntu-890-base kernel: [ 29.239699] sd 3:0:0:0: [sda] Write Protect is offMay 22 12:03:55 ubuntu-890-base kernel: [ 29.239700] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00May 22 12:03:55 ubuntu-890-base kernel: [ 29.239711] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 22 12:03:55 ubuntu-890-base kernel: [ 29.239714] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methodsMay 22 12:03:55 ubuntu-890-base kernel: [ 29.260549] sda5 sda6 >May 22 12:03:55 ubuntu-890-base kernel: [ 29.273408] sd 3:0:0:0: [sda] Attached SCSI diskMay 22 12:03:55 ubuntu-890-base kernel: [ 29.276855] sd 3:0:0:0: Attached scsi generic sg0 type 0May 22 12:03:55 ubuntu-890-base kernel: [ 29.276877] sr 9:0:1:0: Attached scsi generic sg1 type 5May 22 12:03:55 ubuntu-890-base kernel: [ 29.348001] sr0: scsi3-mmc drive: 186x/52x writer cd/rw xa/form2 cdda trayMay 22 12:03:55 ubuntu-890-base kernel: [ 29.348007] Uniform CD-ROM driver Revision: 3.20May 22 12:03:55 ubuntu-890-base kernel: [ 29.348062] sr 9:0:1:0: Attached scsi CD-ROM sr0May 22 12:03:55 ubuntu-890-base kernel: [ 30.526388] usb-storage: device scan completeMay 22 12:03:55 ubuntu-890-base kernel: [ 30.527232] scsi 2:0:0:0: Direct-Access Lexmark USB Mass Storage 200 PQ: 0 ANSI: 0May 22 12:03:55 ubuntu-890-base kernel: [ 30.531783] sd 2:0:0:0: [sdb] Attached SCSI removable diskMay 22 12:03:55 ubuntu-890-base kernel: [ 30.531824] sd 2:0:0:0: Attached scsi generic sg2 type 0May 22 12:03:55 ubuntu-890-base kernel: [ 33.969323] Attempting manual resumeMay 22 12:03:55 ubuntu-890-base kernel: [ 33.969327] swsusp: Resume From Partition 8:6May 22 12:03:55 ubuntu-890-base kernel: [ 33.969329] PM: Checking swsusp image.May 22 12:03:55 ubuntu-890-base kernel: [ 33.969522] PM: Resume from disk failed.May 22 12:03:55 ubuntu-890-base kernel: [ 33.983271] EXT3-fs: INFO: recovery required on readonly filesystem.May 22 12:03:55 ubuntu-890-base kernel: [ 33.983284] EXT3-fs: write access will be enabled during recovery.May 22 12:03:55 ubuntu-890-base kernel: [ 39.185192] kjournald starting. Commit interval 5 secondsMay 22 12:03:55 ubuntu-890-base kernel: [ 39.185576] EXT3-fs: sda5: orphan cleanup on readonly fsMay 22 12:03:55 ubuntu-890-base kernel: [ 39.185585] ext3_orphan_cleanup: deleting unreferenced inode 6742024May 22 12:03:55 ubuntu-890-base kernel: [ 39.185620] ext3_orphan_cleanup: deleting unreferenced inode 6742023May 22 12:03:55 ubuntu-890-base kernel: [ 39.185627] ext3_orphan_cleanup: deleting unreferenced inode 6742022May 22 12:03:55 ubuntu-890-base kernel: [ 39.185634] ext3_orphan_cleanup: deleting unreferenced inode 6742021May 22 12:03:55 ubuntu-890-base kernel: [ 39.185640] ext3_orphan_cleanup: deleting unreferenced inode 6742019May 22 12:03:55 ubuntu-890-base kernel: [ 39.185646] EXT3-fs: sda5: 5 orphan inodes deletedMay 22 12:03:55 ubuntu-890-base kernel: [ 39.185648] EXT3-fs: recovery complete.May 22 12:03:55 ubuntu-890-base kernel: [ 39.188912] EXT3-fs: mounted filesystem with ordered data mode.May 22 12:03:55 ubuntu-890-base kernel: [ 43.730914] pci_hotplug: PCI Hot Plug PCI Core version: 0.5May 22 12:03:55 ubuntu-890-base kernel: [ 43.754473] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4May 22 12:03:55 ubuntu-890-base kernel: [ 43.924821] input: PC Speaker as /devices/platform/pcspkr/input/input3May 22 12:03:55 ubuntu-890-base kernel: [ 43.953269] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00May 22 12:03:55 ubuntu-890-base kernel: [ 43.953285] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40May 22 12:03:55 ubuntu-890-base kernel: [ 43.974088] input: Power Button (FF) as /devices/virtual/input/input4May 22 12:03:55 ubuntu-890-base kernel: [ 44.036288] ACPI: Power Button (FF) [PWRF]May 22 12:03:55 ubuntu-890-base kernel: [ 44.036381] input: Power Button (CM) as /devices/virtual/input/input5May 22 12:03:55 ubuntu-890-base kernel: [ 44.106185] ACPI: Power Button (CM) [PWRB]May 22 12:03:55 ubuntu-890-base kernel: [ 44.383428] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20May 22 12:03:55 ubuntu-890-base kernel: [ 44.383433] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20May 22 12:03:55 ubuntu-890-base kernel: [ 44.383568] PCI: Setting latency timer of device 0000:00:06.1 to 64May 22 12:03:55 ubuntu-890-base kernel: [ 44.632117] eth2: setting full-duplex.May 22 12:03:55 ubuntu-890-base kernel: [ 44.856820] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x043D pid 0x010FMay 22 12:03:55 ubuntu-890-base kernel: [ 44.856836] usbcore: registered new interface driver usblpMay 22 12:03:55 ubuntu-890-base kernel: [ 45.115232] parport_pc 00:09: reported by Plug and Play ACPIMay 22 12:03:55 ubuntu-890-base kernel: [ 45.115292] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]May 22 12:03:55 ubuntu-890-base kernel: [ 46.190154] NET: Registered protocol family 17May 22 12:03:55 ubuntu-890-base kernel: [ 48.953097] loop: module loadedMay 22 12:03:55 ubuntu-890-base kernel: [ 48.971973] lp0: using parport0 (interrupt-driven).May 22 12:03:55 ubuntu-890-base kernel: [ 49.088191] Adding 1494004k swap on /dev/sda6. Priority:-1 extents:1 across:1494004kMay 22 12:03:55 ubuntu-890-base kernel: [ 49.649375] EXT3 FS on sda5, internal journalMay 22 12:03:55 ubuntu-890-base kernel: [ 50.855525] ip_tables: (C) 2000-2006 Netfilter Core TeamMay 22 12:03:55 ubuntu-890-base kernel: [ 51.259483] No dock devices found.May 22 12:03:55 ubuntu-890-base kernel: [ 51.811344] NET: Registered protocol family 10May 22 12:03:55 ubuntu-890-base kernel: [ 51.811578] lo: Disabled Privacy ExtensionsMay 22 12:03:55 ubuntu-890-base kernel: [ 51.904313] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)May 22 12:03:55 ubuntu-890-base kernel: [ 51.903894] powernow-k8: MP systems not supported by PSB BIOS structureMay 22 12:03:55 ubuntu-890-base kernel: [ 51.904359] powernow-k8: MP systems not supported by PSB BIOS structureMay 22 12:03:57 ubuntu-890-base kernel: [ 54.276814] audit(1243008237.097:2): type=1503 operation="capable" name="sys_resource" pid=5493 profile="/usr/sbin/named" namespace="default"May 22 12:04:03 ubuntu-890-base kernel: [ 60.425128] ppdev: user-space parallel port driverMay 22 12:04:03 ubuntu-890-base kernel: [ 60.491159] audit(1243008243.319:3): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5773 profile="/usr/sbin/cupsd" namespace="default"May 22 12:04:04 ubuntu-890-base kernel: [ 62.016376] eth2: no IPv6 routers presentMay 22 12:04:06 ubuntu-890-base kernel: [ 63.232356] eth1: no link during initialization.May 22 12:04:06 ubuntu-890-base kernel: [ 63.232777] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 22 12:04:06 ubuntu-890-base kernel: [ 63.311626] eth0: no link during initialization.May 22 12:04:06 ubuntu-890-base kernel: [ 63.312039] ADDRCONF(NETDEV_UP): eth0: link is not readyMay 22 12:04:06 ubuntu-890-base kernel: [ 63.312661] Bluetooth: Core ver 2.11May 22 12:04:06 ubuntu-890-base kernel: [ 63.312888] NET: Registered protocol family 31May 22 12:04:06 ubuntu-890-base kernel: [ 63.312890] Bluetooth: HCI device and connection manager initializedMay 22 12:04:06 ubuntu-890-base kernel: [ 63.312894] Bluetooth: HCI socket layer initializedMay 22 12:04:06 ubuntu-890-base kernel: [ 63.325835] Bluetooth: L2CAP ver 2.9May 22 12:04:06 ubuntu-890-base kernel: [ 63.325840] Bluetooth: L2CAP socket layer initializedMay 22 12:04:06 ubuntu-890-base kernel: [ 63.350999] Bluetooth: RFCOMM socket layer initializedMay 22 12:04:06 ubuntu-890-base kernel: [ 63.351020] Bluetooth: RFCOMM TTY layer initializedMay 22 12:04:06 ubuntu-890-base kernel: [ 63.351022] Bluetooth: RFCOMM ver 1.8May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpusetMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpuMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Linux version 2.6.24-23-server (buildd@crested) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Nov 27 18:45:02 UTC 2008 (Ubuntu 2.6.24-23.46-server)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro singleMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] BIOS-provided physical RAM map:May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee0000 - 000000001fee3000 (ACPI NVS)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee3000 - 000000001fef0000 (ACPI data)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fef0000 - 000000001ff00000 (reserved)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] end_pfn_map = 1048576May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] DMI 2.3 present.May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7D60 checksum 0May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP 000F7D60, 0014 (r0 Nvidia)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDT 1FEE3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: FACP 1FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: DSDT 1FEE3180, 906B (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: FACS 1FEE0000, 0040May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: MCFG 1FEEC300, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: APIC 1FEEC240, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] CPU has 2 num_coresMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] No NUMA configuration foundMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Faking a node at 0000000000000000-000000001fee0000May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-000000001fee0000May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Zone PFN ranges:May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] DMA 0 -> 4096May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] DMA32 4096 -> 1048576May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Normal 1048576 -> 1048576May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Movable zone start PFN for each nodeMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] early_node_map[2] active PFN rangesMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] 0: 0 -> 159May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] 0: 256 -> 130784May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] On node 0 totalpages: 130687May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] DMA zone: 56 pages used for memmapMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] DMA zone: 1322 pages reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] DMA zone: 2621 pages, LIFO batch:0May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 1732 pages used for memmapMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 124956 pages, LIFO batch:31May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Normal zone: 0 pages used for memmapMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Movable zone: 0 pages used for memmapMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_overrideMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Processor #0 (Bootup-CPU)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Processor #1May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ9 used by override.May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ14 used by override.May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ15 used by override.May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Setting APIC routing to flatMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:d0100000)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUsMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] PERCPU: Allocating 41952 bytes of per cpu dataMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 127577May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Policy zone: DMA32May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Kernel command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro singleMay 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] Initializing CPU#0May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)May 24 22:07:16 ubuntu-890-base kernel: [ 0.000000] TSC calibrated against PM_TIMERMay 24 22:07:16 ubuntu-890-base kernel: [ 21.132745] Marking TSC unstable due to TSCs unsynchronizedMay 24 22:07:16 ubuntu-890-base kernel: [ 21.132747] time.c: Detected 2411.097 MHz processor.May 24 22:07:16 ubuntu-890-base kernel: [ 21.134122] Console: colour VGA+ 80x25May 24 22:07:16 ubuntu-890-base kernel: [ 21.134125] console [tty0] enabledMay 24 22:07:16 ubuntu-890-base kernel: [ 21.137231] Checking aperture...May 24 22:07:16 ubuntu-890-base kernel: [ 21.137277] CPU 0: aperture @ a332000000 size 32 MBMay 24 22:07:16 ubuntu-890-base kernel: [ 21.137324] Aperture too small (32 MB)May 24 22:07:16 ubuntu-890-base kernel: [ 21.142028] No AGP bridge foundMay 24 22:07:16 ubuntu-890-base kernel: [ 21.147507] Memory: 502576k/523136k available (2525k kernel code, 20172k reserved, 1330k data, 328k init)May 24 22:07:16 ubuntu-890-base kernel: [ 21.147603] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1May 24 22:07:16 ubuntu-890-base kernel: [ 21.292467] Calibrating delay using timer specific routine.. 4825.27 BogoMIPS (lpj=24126351)May 24 22:07:16 ubuntu-890-base kernel: [ 21.292589] Security Framework initializedMay 24 22:07:16 ubuntu-890-base kernel: [ 21.292640] SELinux: Disabled at boot.May 24 22:07:16 ubuntu-890-base kernel: [ 21.292697] AppArmor: AppArmor initializedMay 24 22:07:16 ubuntu-890-base kernel: [ 21.292745] Failure registering capabilities with primary security module.May 24 22:07:16 ubuntu-890-base kernel: [ 21.292839] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)May 24 22:07:16 ubuntu-890-base kernel: [ 21.293262] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)May 24 22:07:16 ubuntu-890-base kernel: [ 21.293509] Mount-cache hash table entries: 256May 24 22:07:16 ubuntu-890-base kernel: [ 21.293703] Initializing cgroup subsys nsMay 24 22:07:16 ubuntu-890-base kernel: [ 21.293752] Initializing cgroup subsys cpuacctMay 24 22:07:16 ubuntu-890-base kernel: [ 21.293808] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 24 22:07:16 ubuntu-890-base kernel: [ 21.293857] CPU: L2 Cache: 512K (64 bytes/line)May 24 22:07:16 ubuntu-890-base kernel: [ 21.293904] CPU 0/0 -> Node 0May 24 22:07:16 ubuntu-890-base kernel: [ 21.293949] CPU: Physical Processor ID: 0May 24 22:07:16 ubuntu-890-base kernel: [ 21.293995] CPU: Processor Core ID: 0May 24 22:07:16 ubuntu-890-base kernel: [ 21.294062] SMP alternatives: switching to UP codeMay 24 22:07:16 ubuntu-890-base kernel: [ 21.294719] Early unpacking initramfs... doneMay 24 22:07:16 ubuntu-890-base kernel: [ 21.562613] ACPI: Core revision 20070126May 24 22:07:16 ubuntu-890-base kernel: [ 21.562720] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.May 24 22:07:16 ubuntu-890-base kernel: [ 21.670145] Using local APIC timer interrupts.May 24 22:07:16 ubuntu-890-base kernel: [ 21.711603] APIC timer calibration result 12557787May 24 22:07:16 ubuntu-890-base kernel: [ 21.711604] Detected 12.557 MHz APIC timer.May 24 22:07:16 ubuntu-890-base kernel: [ 21.711759] SMP alternatives: switching to SMP codeMay 24 22:07:16 ubuntu-890-base kernel: [ 21.712332] Booting processor 1/2 APIC 0x1May 24 22:07:16 ubuntu-890-base kernel: [ 21.722622] Initializing CPU#1May 24 22:07:16 ubuntu-890-base kernel: [ 21.871596] Calibrating delay using timer specific routine.. 4822.22 BogoMIPS (lpj=24111127)May 24 22:07:16 ubuntu-890-base kernel: [ 21.871601] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 24 22:07:16 ubuntu-890-base kernel: [ 21.871603] CPU: L2 Cache: 512K (64 bytes/line)May 24 22:07:16 ubuntu-890-base kernel: [ 21.871605] CPU 1/1 -> Node 0May 24 22:07:16 ubuntu-890-base kernel: [ 21.871606] CPU: Physical Processor ID: 0May 24 22:07:16 ubuntu-890-base kernel: [ 21.871608] CPU: Processor Core ID: 1May 24 22:07:16 ubuntu-890-base kernel: [ 21.871683] AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02May 24 22:07:16 ubuntu-890-base kernel: [ 21.871562] Brought up 2 CPUsMay 24 22:07:16 ubuntu-890-base kernel: [ 21.872081] CPU0 attaching sched-domain:May 24 22:07:16 ubuntu-890-base kernel: [ 21.872083] domain 0: span 00000000,00000003May 24 22:07:16 ubuntu-890-base kernel: [ 21.872085] groups: 00000000,00000001 00000000,00000002May 24 22:07:16 ubuntu-890-base kernel: [ 21.872088] domain 1: span 00000000,00000003May 24 22:07:16 ubuntu-890-base kernel: [ 21.872090] groups: 00000000,00000003May 24 22:07:16 ubuntu-890-base kernel: [ 21.872092] CPU1 attaching sched-domain:May 24 22:07:16 ubuntu-890-base kernel: [ 21.872093] domain 0: span 00000000,00000003May 24 22:07:16 ubuntu-890-base kernel: [ 21.872095] groups: 00000000,00000002 00000000,00000001May 24 22:07:16 ubuntu-890-base kernel: [ 21.872098] domain 1: span 00000000,00000003May 24 22:07:16 ubuntu-890-base kernel: [ 21.872099] groups: 00000000,00000003May 24 22:07:16 ubuntu-890-base kernel: [ 21.872418] net_namespace: 120 bytesMay 24 22:07:16 ubuntu-890-base kernel: [ 21.872833] Time: 20:11:14 Date: 05/24/09May 24 22:07:16 ubuntu-890-base kernel: [ 21.872911] NET: Registered protocol family 16May 24 22:07:16 ubuntu-890-base kernel: [ 21.873131] ACPI: bus type pci registeredMay 24 22:07:16 ubuntu-890-base kernel: [ 21.873242] PCI: Using configuration type 1May 24 22:07:16 ubuntu-890-base kernel: [ 21.874895] ACPI: EC: Look up EC in DSDTMay 24 22:07:16 ubuntu-890-base kernel: [ 21.882619] ACPI: Interpreter enabledMay 24 22:07:16 ubuntu-890-base kernel: [ 21.882669] ACPI: (supports S0 S1 S3 S4 S5)May 24 22:07:16 ubuntu-890-base kernel: [ 21.882900] ACPI: Using IOAPIC for interrupt routingMay 24 22:07:16 ubuntu-890-base kernel: [ 21.893671] ACPI: PCI Root Bridge [PCI0] (0000:00)May 24 22:07:16 ubuntu-890-base kernel: [ 21.894395] PCI: Transparent bridge - 0000:00:06.0May 24 22:07:16 ubuntu-890-base kernel: [ 21.894879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]May 24 22:07:16 ubuntu-890-base kernel: [ 21.895227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]May 24 22:07:16 ubuntu-890-base kernel: [ 21.990669] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 21.991309] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 21.991859] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 21.992484] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 21.993110] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 21.993737] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 21.994287] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 21.994836] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 21.995462] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 21.996093] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 21.996643] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 21.997192] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 21.997747] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 21.998298] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 21.998925] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 21.999475] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 22.000025] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.000652] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 22.001214] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 22.001766] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)May 24 22:07:16 ubuntu-890-base kernel: [ 22.002351] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.002791] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.003195] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.003633] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.004071] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.004508] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.004910] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.005313] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.005752] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.006260] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.006767] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.007274] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.007818] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.008325] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.008832] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.009343] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.009885] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.010425] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.010932] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.011441] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0May 24 22:07:16 ubuntu-890-base kernel: [ 22.011872] Linux Plug and Play Support v0.97 (c) Adam BelayMay 24 22:07:16 ubuntu-890-base kernel: [ 22.011947] pnp: PnP ACPI initMay 24 22:07:16 ubuntu-890-base kernel: [ 22.012000] ACPI: bus type pnp registeredMay 24 22:07:16 ubuntu-890-base kernel: [ 22.017672] pnpacpi: exceeded the max number of mem resources: 12May 24 22:07:16 ubuntu-890-base kernel: [ 22.017832] pnp: PnP ACPI: found 13 devicesMay 24 22:07:16 ubuntu-890-base kernel: [ 22.017879] ACPI: ACPI bus type pnp unregisteredMay 24 22:07:16 ubuntu-890-base kernel: [ 22.018141] PCI: Using ACPI for IRQ routingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.018190] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportMay 24 22:07:16 ubuntu-890-base kernel: [ 22.051151] NET: Registered protocol family 8May 24 22:07:16 ubuntu-890-base kernel: [ 22.051198] NET: Registered protocol family 20May 24 22:07:16 ubuntu-890-base kernel: [ 22.051267] NetLabel: InitializingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.051313] NetLabel: domain hash size = 128May 24 22:07:16 ubuntu-890-base kernel: [ 22.051358] NetLabel: protocols = UNLABELED CIPSOv4May 24 22:07:16 ubuntu-890-base kernel: [ 22.051417] NetLabel: unlabeled traffic allowed by defaultMay 24 22:07:16 ubuntu-890-base kernel: [ 22.051573] AppArmor: AppArmor Filesystem EnabledMay 24 22:07:16 ubuntu-890-base kernel: [ 22.081082] system 00:01: ioport range 0x1000-0x107f has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.081132] system 00:01: ioport range 0x1080-0x10ff has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.081180] system 00:01: ioport range 0x1400-0x147f has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.081982] system 00:01: ioport range 0x1480-0x14ff has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082031] system 00:01: ioport range 0x1800-0x187f has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082079] system 00:01: ioport range 0x1880-0x18ff has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082132] system 00:02: ioport range 0x4d0-0x4d1 has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082180] system 00:02: ioport range 0x800-0x87f has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082229] system 00:02: ioport range 0x290-0x297 has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082287] system 00:0b: iomem range 0x0-0x0 could not be reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082339] system 00:0c: iomem range 0xd5800-0xd7fff has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082388] system 00:0c: iomem range 0xf0000-0xf7fff could not be reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082437] system 00:0c: iomem range 0xf8000-0xfbfff could not be reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082486] system 00:0c: iomem range 0xfc000-0xfffff could not be reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082535] system 00:0c: iomem range 0x1fee0000-0x1fefffff could not be reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082592] system 00:0c: iomem range 0xffff0000-0xffffffff has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082644] system 00:0c: iomem range 0x0-0x9ffff could not be reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082693] system 00:0c: iomem range 0x100000-0x1fedffff could not be reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082749] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082798] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082855] system 00:0c: iomem range 0xfefff000-0xfeffffff has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.082904] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reservedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.083304] PCI: Bridge: 0000:00:06.0May 24 22:07:16 ubuntu-890-base kernel: [ 22.083351] IO window: 9000-9fffMay 24 22:07:16 ubuntu-890-base kernel: [ 22.083398] MEM window: fde00000-fdefffffMay 24 22:07:16 ubuntu-890-base kernel: [ 22.083444] PREFETCH window: fd000000-fd7fffffMay 24 22:07:16 ubuntu-890-base kernel: [ 22.083491] PCI: Bridge: 0000:00:0a.0May 24 22:07:16 ubuntu-890-base kernel: [ 22.083536] IO window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.083582] MEM window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.083628] PREFETCH window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.083674] PCI: Bridge: 0000:00:0b.0May 24 22:07:16 ubuntu-890-base kernel: [ 22.083719] IO window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.083765] MEM window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.083810] PREFETCH window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.083857] PCI: Bridge: 0000:00:0c.0May 24 22:07:16 ubuntu-890-base kernel: [ 22.083902] IO window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.083947] MEM window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.083993] PREFETCH window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.084039] PCI: Bridge: 0000:00:0d.0May 24 22:07:16 ubuntu-890-base kernel: [ 22.084084] IO window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.084130] MEM window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.084175] PREFETCH window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.084222] PCI: Bridge: 0000:00:0e.0May 24 22:07:16 ubuntu-890-base kernel: [ 22.084267] IO window: 7000-8fffMay 24 22:07:16 ubuntu-890-base kernel: [ 22.084313] MEM window: fdd00000-fddfffffMay 24 22:07:16 ubuntu-890-base kernel: [ 22.084359] PREFETCH window: disabled.May 24 22:07:16 ubuntu-890-base kernel: [ 22.084406] PCI: Bridge: 0000:00:0f.0May 24 22:07:16 ubuntu-890-base kernel: [ 22.084452] IO window: 6000-6fffMay 24 22:07:16 ubuntu-890-base kernel: [ 22.084498] MEM window: fa000000-fcffffffMay 24 22:07:16 ubuntu-890-base kernel: [ 22.084544] PREFETCH window: e0000000-efffffffMay 24 22:07:16 ubuntu-890-base kernel: [ 22.084597] PCI: Setting latency timer of device 0000:00:06.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.084607] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.084613] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.084618] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.084624] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.084629] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.084634] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.084645] NET: Registered protocol family 2May 24 22:07:16 ubuntu-890-base kernel: [ 22.091035] Time: acpi_pm clocksource has been installed.May 24 22:07:16 ubuntu-890-base kernel: [ 22.091097] Switched to high resolution mode on CPU 0May 24 22:07:16 ubuntu-890-base kernel: [ 22.091362] Switched to high resolution mode on CPU 1May 24 22:07:16 ubuntu-890-base kernel: [ 22.171098] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)May 24 22:07:16 ubuntu-890-base kernel: [ 22.171359] TCP established hash table entries: 16384 (order: 6, 262144 bytes)May 24 22:07:16 ubuntu-890-base kernel: [ 22.171605] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)May 24 22:07:16 ubuntu-890-base kernel: [ 22.171812] TCP: Hash tables configured (established 16384 bind 16384)May 24 22:07:16 ubuntu-890-base kernel: [ 22.171862] TCP reno registeredMay 24 22:07:16 ubuntu-890-base kernel: [ 22.201002] checking if image is initramfs... it isMay 24 22:07:16 ubuntu-890-base kernel: [ 22.721223] Freeing initrd memory: 7563k freedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.728016] audit: initializing netlink socket (disabled)May 24 22:07:16 ubuntu-890-base kernel: [ 22.728078] audit(1243195874.570:1): initializedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.728246] Total HugeTLB memory allocated, 0May 24 22:07:16 ubuntu-890-base kernel: [ 22.729952] VFS: Disk quotas dquot_6.5.1May 24 22:07:16 ubuntu-890-base kernel: [ 22.730096] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)May 24 22:07:16 ubuntu-890-base kernel: [ 22.730314] io scheduler noop registeredMay 24 22:07:16 ubuntu-890-base kernel: [ 22.730361] io scheduler anticipatory registeredMay 24 22:07:16 ubuntu-890-base kernel: [ 22.730408] io scheduler deadline registered (default)May 24 22:07:16 ubuntu-890-base kernel: [ 22.730539] io scheduler cfq registeredMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750278] pci 0000:00:05.0: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750343] pci 0000:00:05.1: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750401] pci 0000:00:05.2: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750458] pci 0000:00:06.0: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750517] pci 0000:00:06.1: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750577] pci 0000:00:08.0: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750637] pci 0000:00:09.0: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750695] pci 0000:00:0a.0: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750754] pci 0000:00:0b.0: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750812] pci 0000:00:0c.0: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750871] pci 0000:00:0d.0: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750929] pci 0000:00:0e.0: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.750987] pci 0000:00:0f.0: Enabling HT MSI MappingMay 24 22:07:16 ubuntu-890-base kernel: [ 22.751054] Boot video device is 0000:07:00.0May 24 22:07:16 ubuntu-890-base kernel: [ 22.751221] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.751240] assign_interrupt_mode Found MSI capabilityMay 24 22:07:16 ubuntu-890-base kernel: [ 22.751303] Allocate Port Service[0000:00:0a.0:pcie00]May 24 22:07:16 ubuntu-890-base kernel: [ 22.751359] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.751377] assign_interrupt_mode Found MSI capabilityMay 24 22:07:16 ubuntu-890-base kernel: [ 22.751435] Allocate Port Service[0000:00:0b.0:pcie00]May 24 22:07:16 ubuntu-890-base kernel: [ 22.751484] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.751501] assign_interrupt_mode Found MSI capabilityMay 24 22:07:16 ubuntu-890-base kernel: [ 22.751560] Allocate Port Service[0000:00:0c.0:pcie00]May 24 22:07:16 ubuntu-890-base kernel: [ 22.751611] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.751628] assign_interrupt_mode Found MSI capabilityMay 24 22:07:16 ubuntu-890-base kernel: [ 22.751686] Allocate Port Service[0000:00:0d.0:pcie00]May 24 22:07:16 ubuntu-890-base kernel: [ 22.751736] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.751754] assign_interrupt_mode Found MSI capabilityMay 24 22:07:16 ubuntu-890-base kernel: [ 22.751812] Allocate Port Service[0000:00:0e.0:pcie00]May 24 22:07:16 ubuntu-890-base kernel: [ 22.751859] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 22.751876] assign_interrupt_mode Found MSI capabilityMay 24 22:07:16 ubuntu-890-base kernel: [ 22.751934] Allocate Port Service[0000:00:0f.0:pcie00]May 24 22:07:16 ubuntu-890-base kernel: [ 22.774754] Real Time Clock Driver v1.12acMay 24 22:07:16 ubuntu-890-base kernel: [ 22.774905] Linux agpgart interface v0.102May 24 22:07:16 ubuntu-890-base kernel: [ 22.774952] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledMay 24 22:07:16 ubuntu-890-base kernel: [ 22.775149] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 24 22:07:16 ubuntu-890-base kernel: [ 22.775729] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 24 22:07:16 ubuntu-890-base kernel: [ 22.776442] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeMay 24 22:07:16 ubuntu-890-base kernel: [ 22.776560] input: Macintosh mouse button emulation as /devices/virtual/input/input0May 24 22:07:16 ubuntu-890-base kernel: [ 22.776696] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1May 24 22:07:16 ubuntu-890-base kernel: [ 22.776745] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnpMay 24 22:07:16 ubuntu-890-base kernel: [ 22.776897] serio: i8042 KBD port at 0x60,0x64 irq 1May 24 22:07:16 ubuntu-890-base kernel: [ 22.810212] mice: PS/2 mouse device common for all miceMay 24 22:07:16 ubuntu-890-base kernel: [ 22.810302] cpuidle: using governor ladderMay 24 22:07:16 ubuntu-890-base kernel: [ 22.810349] cpuidle: using governor menuMay 24 22:07:16 ubuntu-890-base kernel: [ 22.810542] NET: Registered protocol family 1May 24 22:07:16 ubuntu-890-base kernel: [ 22.810688] registered taskstats version 1May 24 22:07:16 ubuntu-890-base kernel: [ 22.810904] Magic number: 9:535:195May 24 22:07:16 ubuntu-890-base kernel: [ 22.810989] hash matches device ttys7May 24 22:07:16 ubuntu-890-base kernel: [ 22.811043] hash matches device ttypaMay 24 22:07:16 ubuntu-890-base kernel: [ 22.811177] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)May 24 22:07:16 ubuntu-890-base kernel: [ 22.811234] BIOS EDD facility v0.16 2004-Jun-25, 6 devices foundMay 24 22:07:16 ubuntu-890-base kernel: [ 22.811473] Freeing unused kernel memory: 328k freedMay 24 22:07:16 ubuntu-890-base kernel: [ 22.811981] Write protecting the kernel read-only data: 1044kMay 24 22:07:16 ubuntu-890-base kernel: [ 22.846678] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1May 24 22:07:16 ubuntu-890-base kernel: [ 22.979177] fuse init (API version 7.9)May 24 22:07:16 ubuntu-890-base kernel: [ 22.990538] ACPI: Fan [FAN] (on)May 24 22:07:16 ubuntu-890-base kernel: [ 22.996547] ACPI: Thermal Zone [THRM] (40 C)May 24 22:07:16 ubuntu-890-base kernel: [ 23.152303] usbcore: registered new interface driver usbfsMay 24 22:07:16 ubuntu-890-base kernel: [ 23.152383] usbcore: registered new interface driver hubMay 24 22:07:16 ubuntu-890-base kernel: [ 23.152990] usbcore: registered new device driver usbMay 24 22:07:16 ubuntu-890-base kernel: [ 23.160050] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23May 24 22:07:16 ubuntu-890-base kernel: [ 23.160114] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23May 24 22:07:16 ubuntu-890-base kernel: [ 23.160409] PCI: Setting latency timer of device 0000:00:02.1 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 23.160416] ehci_hcd 0000:00:02.1: EHCI Host ControllerMay 24 22:07:16 ubuntu-890-base kernel: [ 23.160720] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1May 24 22:07:16 ubuntu-890-base kernel: [ 23.160805] ehci_hcd 0000:00:02.1: debug port 1May 24 22:07:16 ubuntu-890-base kernel: [ 23.160853] PCI: cache line size of 64 is not supported by device 0000:00:02.1May 24 22:07:16 ubuntu-890-base kernel: [ 23.160864] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000May 24 22:07:16 ubuntu-890-base kernel: [ 23.179263] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004May 24 22:07:16 ubuntu-890-base kernel: [ 23.179461] usb usb1: configuration #1 chosen from 1 choiceMay 24 22:07:16 ubuntu-890-base kernel: [ 23.179530] hub 1-0:1.0: USB hub foundMay 24 22:07:16 ubuntu-890-base kernel: [ 23.179582] hub 1-0:1.0: 10 ports detectedMay 24 22:07:16 ubuntu-890-base kernel: [ 23.191097] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverMay 24 22:07:16 ubuntu-890-base kernel: [ 23.289860] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22May 24 22:07:16 ubuntu-890-base kernel: [ 23.289923] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22May 24 22:07:16 ubuntu-890-base kernel: [ 23.290221] PCI: Setting latency timer of device 0000:00:02.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 23.290228] ohci_hcd 0000:00:02.0: OHCI Host ControllerMay 24 22:07:16 ubuntu-890-base kernel: [ 23.290338] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2May 24 22:07:16 ubuntu-890-base kernel: [ 23.290415] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000May 24 22:07:16 ubuntu-890-base kernel: [ 23.322253] SCSI subsystem initializedMay 24 22:07:16 ubuntu-890-base kernel: [ 23.336672] libata version 3.00 loaded.May 24 22:07:16 ubuntu-890-base kernel: [ 23.353796] usb usb2: configuration #1 chosen from 1 choiceMay 24 22:07:16 ubuntu-890-base kernel: [ 23.353870] hub 2-0:1.0: USB hub foundMay 24 22:07:16 ubuntu-890-base kernel: [ 23.353923] hub 2-0:1.0: 10 ports detectedMay 24 22:07:16 ubuntu-890-base kernel: [ 23.461848] PCI: Setting latency timer of device 0000:00:04.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 23.462323] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21May 24 22:07:16 ubuntu-890-base kernel: [ 23.462383] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21May 24 22:07:16 ubuntu-890-base kernel: [ 23.462524] PCI: Setting latency timer of device 0000:00:05.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 23.462531] ACPI: PCI interrupt for device 0000:00:05.0 disabledMay 24 22:07:16 ubuntu-890-base kernel: [ 23.462942] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20May 24 22:07:16 ubuntu-890-base kernel: [ 23.462994] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20May 24 22:07:16 ubuntu-890-base kernel: [ 23.463134] PCI: Setting latency timer of device 0000:00:05.1 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 23.463140] ACPI: PCI interrupt for device 0000:00:05.1 disabledMay 24 22:07:16 ubuntu-890-base kernel: [ 23.463548] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23May 24 22:07:16 ubuntu-890-base kernel: [ 23.463596] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 23 (level, low) -> IRQ 23May 24 22:07:16 ubuntu-890-base kernel: [ 23.463736] PCI: Setting latency timer of device 0000:00:05.2 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 23.463742] ACPI: PCI interrupt for device 0000:00:05.2 disabledMay 24 22:07:16 ubuntu-890-base kernel: [ 23.463809] PCI: Enabling device 0000:06:00.1 (0000 -> 0001)May 24 22:07:16 ubuntu-890-base kernel: [ 23.464208] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16May 24 22:07:16 ubuntu-890-base kernel: [ 23.464260] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 24 22:07:16 ubuntu-890-base kernel: [ 23.464409] PCI: Setting latency timer of device 0000:06:00.1 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 23.464418] ACPI: PCI interrupt for device 0000:06:00.1 disabledMay 24 22:07:16 ubuntu-890-base kernel: [ 23.466205] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17May 24 22:07:16 ubuntu-890-base kernel: [ 23.466264] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17May 24 22:07:16 ubuntu-890-base kernel: [ 23.466540] 3c59x: Donald Becker and others.May 24 22:07:16 ubuntu-890-base kernel: [ 23.466607] 0000:01:07.0: 3Com PCI 3c905C Tornado at ffffc20000174000.May 24 22:07:16 ubuntu-890-base kernel: [ 23.488513] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.May 24 22:07:16 ubuntu-890-base kernel: [ 23.489754] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22May 24 22:07:16 ubuntu-890-base kernel: [ 23.489803] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22May 24 22:07:16 ubuntu-890-base kernel: [ 23.489933] PCI: Setting latency timer of device 0000:00:08.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 23.497425] Floppy drive(s): fd0 is 1.44MMay 24 22:07:16 ubuntu-890-base kernel: [ 23.515221] FDC 0 is a post-1991 82077May 24 22:07:16 ubuntu-890-base kernel: [ 23.788248] usb 1-4: new high speed USB device using ehci_hcd and address 3May 24 22:07:16 ubuntu-890-base kernel: [ 23.939986] usb 1-4: configuration #1 chosen from 1 choiceMay 24 22:07:16 ubuntu-890-base kernel: [ 24.020995] forcedeth 0000:00:08.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:f2:20May 24 22:07:16 ubuntu-890-base kernel: [ 24.021059] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 24 22:07:16 ubuntu-890-base kernel: [ 24.021577] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21May 24 22:07:16 ubuntu-890-base kernel: [ 24.021627] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AMC1] -> GSI 21 (level, low) -> IRQ 21May 24 22:07:16 ubuntu-890-base kernel: [ 24.021759] PCI: Setting latency timer of device 0000:00:09.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 24.277416] usb 2-3: new low speed USB device using ohci_hcd and address 2May 24 22:07:16 ubuntu-890-base kernel: [ 24.506881] usb 2-3: configuration #1 chosen from 1 choiceMay 24 22:07:16 ubuntu-890-base kernel: [ 24.513889] usbcore: registered new interface driver hiddevMay 24 22:07:16 ubuntu-890-base kernel: [ 24.515855] hiddev96hidraw0: USB HID v1.00 Device [Lexmark 6500 Series] on usb-0000:00:02.1-4May 24 22:07:16 ubuntu-890-base kernel: [ 24.521962] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2May 24 22:07:16 ubuntu-890-base kernel: [ 24.550114] forcedeth 0000:00:09.0: ifname eth2, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:fd:c5May 24 22:07:16 ubuntu-890-base kernel: [ 24.550178] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 24 22:07:16 ubuntu-890-base kernel: [ 24.550093] ahci 0000:06:00.0: version 3.0May 24 22:07:16 ubuntu-890-base kernel: [ 24.550550] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16May 24 22:07:16 ubuntu-890-base kernel: [ 24.550603] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16May 24 22:07:16 ubuntu-890-base kernel: [ 24.579685] input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3May 24 22:07:16 ubuntu-890-base kernel: [ 24.587707] hiddev97hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-3May 24 22:07:16 ubuntu-890-base kernel: [ 24.587889] usbcore: registered new interface driver usbhidMay 24 22:07:16 ubuntu-890-base kernel: [ 24.587695] usbcore: registered new interface driver libusualMay 24 22:07:16 ubuntu-890-base kernel: [ 24.587988] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driverMay 24 22:07:16 ubuntu-890-base kernel: [ 24.591521] Initializing USB Mass Storage driver...May 24 22:07:16 ubuntu-890-base kernel: [ 24.592148] scsi0 : SCSI emulation for USB Mass Storage devicesMay 24 22:07:16 ubuntu-890-base kernel: [ 24.592268] usbcore: registered new interface driver usb-storageMay 24 22:07:16 ubuntu-890-base kernel: [ 24.592319] USB Mass Storage support registered.May 24 22:07:16 ubuntu-890-base kernel: [ 24.592490] usb-storage: device found at 3May 24 22:07:16 ubuntu-890-base kernel: [ 24.592492] usb-storage: waiting for device to settle before scanningMay 24 22:07:16 ubuntu-890-base kernel: [ 25.555302] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA modeMay 24 22:07:16 ubuntu-890-base kernel: [ 25.555365] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part May 24 22:07:16 ubuntu-890-base kernel: [ 25.555417] PCI: Setting latency timer of device 0000:06:00.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 25.555574] scsi1 : ahciMay 24 22:07:16 ubuntu-890-base kernel: [ 25.555689] scsi2 : ahciMay 24 22:07:16 ubuntu-890-base kernel: [ 25.555761] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16May 24 22:07:16 ubuntu-890-base kernel: [ 25.555819] ata2: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16May 24 22:07:16 ubuntu-890-base kernel: [ 25.904706] ata1: SATA link down (SStatus 0 SControl 300)May 24 22:07:16 ubuntu-890-base kernel: [ 26.254126] ata2: SATA link down (SStatus 0 SControl 300)May 24 22:07:16 ubuntu-890-base kernel: [ 26.254854] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19May 24 22:07:16 ubuntu-890-base kernel: [ 26.254917] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19May 24 22:07:16 ubuntu-890-base kernel: [ 26.305127] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8]May 24 22:07:16 ubuntu-890-base kernel: [ 26.308519] pata_amd 0000:00:04.0: version 0.3.10May 24 22:07:16 ubuntu-890-base kernel: [ 26.308570] PCI: Setting latency timer of device 0000:00:04.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 26.310916] scsi3 : pata_amdMay 24 22:07:16 ubuntu-890-base kernel: [ 26.311956] scsi4 : pata_amdMay 24 22:07:16 ubuntu-890-base kernel: [ 26.312635] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14May 24 22:07:16 ubuntu-890-base kernel: [ 26.312684] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15May 24 22:07:16 ubuntu-890-base kernel: [ 26.843360] ata3.01: ATAPI: LITE-ON LTR-52327S, QS06, max UDMA/33May 24 22:07:16 ubuntu-890-base kernel: [ 27.042963] ata3.01: configured for UDMA/33May 24 22:07:16 ubuntu-890-base kernel: [ 27.043041] ata4: port disabled. ignoring.May 24 22:07:16 ubuntu-890-base kernel: [ 27.055407] scsi 3:0:1:0: CD-ROM LITE-ON LTR-52327S QS06 PQ: 0 ANSI: 5May 24 22:07:16 ubuntu-890-base kernel: [ 27.055746] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 24 22:07:16 ubuntu-890-base kernel: [ 27.055918] PCI: Setting latency timer of device 0000:06:00.1 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 27.056602] sata_nv 0000:00:05.0: version 3.5May 24 22:07:16 ubuntu-890-base kernel: [ 27.056616] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21May 24 22:07:16 ubuntu-890-base kernel: [ 27.056966] PCI: Setting latency timer of device 0000:00:05.0 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 27.057764] scsi5 : pata_jmicronMay 24 22:07:16 ubuntu-890-base kernel: [ 27.057974] scsi6 : sata_nvMay 24 22:07:16 ubuntu-890-base kernel: [ 27.061481] scsi7 : pata_jmicronMay 24 22:07:16 ubuntu-890-base kernel: [ 27.061563] ata5: PATA max UDMA/100 cmd 0x8c00 ctl 0x8800 bmdma 0x7c00 irq 16May 24 22:07:16 ubuntu-890-base kernel: [ 27.061615] ata6: PATA max UDMA/100 cmd 0x8400 ctl 0x8000 bmdma 0x7c08 irq 16May 24 22:07:16 ubuntu-890-base kernel: [ 27.063188] scsi8 : sata_nvMay 24 22:07:16 ubuntu-890-base kernel: [ 27.063468] ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21May 24 22:07:16 ubuntu-890-base kernel: [ 27.063518] ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21May 24 22:07:16 ubuntu-890-base kernel: [ 27.066778] Driver 'sr' needs updating - please use bus_type methodsMay 24 22:07:16 ubuntu-890-base kernel: [ 27.140219] sr0: scsi3-mmc drive: 186x/52x writer cd/rw xa/form2 cdda trayMay 24 22:07:16 ubuntu-890-base kernel: [ 27.140273] Uniform CD-ROM driver Revision: 3.20May 24 22:07:16 ubuntu-890-base kernel: [ 27.140365] sr 3:0:1:0: Attached scsi CD-ROM sr0May 24 22:07:16 ubuntu-890-base kernel: [ 27.144685] sr 3:0:1:0: Attached scsi generic sg0 type 5May 24 22:07:16 ubuntu-890-base kernel: [ 27.551959] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)May 24 22:07:16 ubuntu-890-base kernel: [ 27.584053] ata7.00: ATA-7: WDC WD2500JS-00SGB0, 20.06C03, max UDMA/133May 24 22:07:16 ubuntu-890-base kernel: [ 27.584107] ata7.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)May 24 22:07:16 ubuntu-890-base kernel: [ 27.605346] ata7.00: configured for UDMA/133May 24 22:07:16 ubuntu-890-base kernel: [ 27.624637] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7a6f6]May 24 22:07:16 ubuntu-890-base kernel: [ 27.931319] ata8: SATA link down (SStatus 0 SControl 300)May 24 22:07:16 ubuntu-890-base kernel: [ 27.941729] scsi 6:0:0:0: Direct-Access ATA WDC WD2500JS-00S 20.0 PQ: 0 ANSI: 5May 24 22:07:16 ubuntu-890-base kernel: [ 27.941863] scsi 6:0:0:0: Attached scsi generic sg1 type 0May 24 22:07:16 ubuntu-890-base kernel: [ 27.941946] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20May 24 22:07:16 ubuntu-890-base kernel: [ 27.942271] PCI: Setting latency timer of device 0000:00:05.1 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 27.943517] scsi9 : sata_nvMay 24 22:07:16 ubuntu-890-base kernel: [ 27.943973] scsi10 : sata_nvMay 24 22:07:16 ubuntu-890-base kernel: [ 27.944208] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20May 24 22:07:16 ubuntu-890-base kernel: [ 27.944258] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20May 24 22:07:16 ubuntu-890-base kernel: [ 28.270756] ata9: SATA link down (SStatus 0 SControl 300)May 24 22:07:16 ubuntu-890-base kernel: [ 28.620168] ata10: SATA link down (SStatus 0 SControl 300)May 24 22:07:16 ubuntu-890-base kernel: [ 28.630508] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 23 (level, low) -> IRQ 23May 24 22:07:16 ubuntu-890-base kernel: [ 28.630840] PCI: Setting latency timer of device 0000:00:05.2 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 28.630935] scsi11 : sata_nvMay 24 22:07:16 ubuntu-890-base kernel: [ 28.631523] scsi12 : sata_nvMay 24 22:07:16 ubuntu-890-base kernel: [ 28.631750] ata11: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 23May 24 22:07:16 ubuntu-890-base kernel: [ 28.631807] ata12: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 23May 24 22:07:16 ubuntu-890-base kernel: [ 28.949620] ata11: SATA link down (SStatus 0 SControl 300)May 24 22:07:16 ubuntu-890-base kernel: [ 29.289058] ata12: SATA link down (SStatus 0 SControl 300)May 24 22:07:16 ubuntu-890-base kernel: [ 29.306040] Driver 'sd' needs updating - please use bus_type methodsMay 24 22:07:16 ubuntu-890-base kernel: [ 29.306179] sd 6:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 24 22:07:16 ubuntu-890-base kernel: [ 29.306238] sd 6:0:0:0: [sda] Write Protect is offMay 24 22:07:16 ubuntu-890-base kernel: [ 29.306286] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00May 24 22:07:16 ubuntu-890-base kernel: [ 29.306301] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 24 22:07:16 ubuntu-890-base kernel: [ 29.306424] sd 6:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 24 22:07:16 ubuntu-890-base kernel: [ 29.306480] sd 6:0:0:0: [sda] Write Protect is offMay 24 22:07:16 ubuntu-890-base kernel: [ 29.306527] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00May 24 22:07:16 ubuntu-890-base kernel: [ 29.306539] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 24 22:07:16 ubuntu-890-base kernel: [ 29.306599] sda: sda1 sda2 < sda5 sda6 >May 24 22:07:16 ubuntu-890-base kernel: [ 29.342497] sd 6:0:0:0: [sda] Attached SCSI diskMay 24 22:07:16 ubuntu-890-base kernel: [ 29.578954] usb-storage: device scan completeMay 24 22:07:16 ubuntu-890-base kernel: [ 29.580230] scsi 0:0:0:0: Direct-Access Lexmark USB Mass Storage 200 PQ: 0 ANSI: 0May 24 22:07:16 ubuntu-890-base kernel: [ 29.585650] sd 0:0:0:0: [sdb] Attached SCSI removable diskMay 24 22:07:16 ubuntu-890-base kernel: [ 29.585741] sd 0:0:0:0: Attached scsi generic sg2 type 0May 24 22:07:16 ubuntu-890-base kernel: [ 31.639065] Attempting manual resumeMay 24 22:07:16 ubuntu-890-base kernel: [ 31.639114] swsusp: Resume From Partition 8:6May 24 22:07:16 ubuntu-890-base kernel: [ 31.639116] PM: Checking swsusp image.May 24 22:07:16 ubuntu-890-base kernel: [ 31.639297] PM: Resume from disk failed.May 24 22:07:16 ubuntu-890-base kernel: [ 31.679504] kjournald starting. Commit interval 5 secondsMay 24 22:07:16 ubuntu-890-base kernel: [ 31.679564] EXT3-fs: mounted filesystem with ordered data mode.May 24 22:07:16 ubuntu-890-base kernel: [ 37.193793] input: PC Speaker as /devices/platform/pcspkr/input/input3May 24 22:07:16 ubuntu-890-base kernel: [ 37.284900] pci_hotplug: PCI Hot Plug PCI Core version: 0.5May 24 22:07:16 ubuntu-890-base kernel: [ 37.315807] parport_pc 00:09: reported by Plug and Play ACPIMay 24 22:07:16 ubuntu-890-base kernel: [ 37.315916] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]May 24 22:07:16 ubuntu-890-base kernel: [ 37.326475] input: Power Button (FF) as /devices/virtual/input/input4May 24 22:07:16 ubuntu-890-base kernel: [ 37.349197] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4May 24 22:07:16 ubuntu-890-base kernel: [ 37.438174] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00May 24 22:07:16 ubuntu-890-base kernel: [ 37.438243] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40May 24 22:07:16 ubuntu-890-base kernel: [ 37.665226] ACPI: Power Button (FF) [PWRF]May 24 22:07:16 ubuntu-890-base kernel: [ 37.665333] input: Power Button (CM) as /devices/virtual/input/input5May 24 22:07:16 ubuntu-890-base kernel: [ 37.797490] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20May 24 22:07:16 ubuntu-890-base kernel: [ 37.797546] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20May 24 22:07:16 ubuntu-890-base kernel: [ 37.797923] PCI: Setting latency timer of device 0000:00:06.1 to 64May 24 22:07:16 ubuntu-890-base kernel: [ 37.824949] ACPI: Power Button (CM) [PWRB]May 24 22:07:16 ubuntu-890-base kernel: [ 38.046373] udev: renamed network interface eth2 to eth1May 24 22:07:16 ubuntu-890-base kernel: [ 38.057814] udev: renamed network interface eth1_rename to eth0May 24 22:07:16 ubuntu-890-base kernel: [ 38.063683] eth0: no link during initialization.May 24 22:07:16 ubuntu-890-base kernel: [ 38.105024] udev: renamed network interface eth0_rename to eth2May 24 22:07:16 ubuntu-890-base kernel: [ 38.295786] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x043D pid 0x010FMay 24 22:07:16 ubuntu-890-base kernel: [ 38.295867] usbcore: registered new interface driver usblpMay 24 22:07:16 ubuntu-890-base kernel: [ 39.292502] NET: Registered protocol family 17May 24 22:07:16 ubuntu-890-base kernel: [ 41.179430] loop: module loadedMay 24 22:07:16 ubuntu-890-base kernel: [ 41.199028] lp0: using parport0 (interrupt-driven).May 24 22:07:16 ubuntu-890-base kernel: [ 41.307980] Adding 1494004k swap on /dev/sda6. Priority:-1 extents:1 across:1494004kMay 24 22:07:16 ubuntu-890-base kernel: [ 41.602931] EXT3 FS on sda5, internal journalMay 24 22:07:16 ubuntu-890-base kernel: [ 42.268244] ip_tables: (C) 2000-2006 Netfilter Core TeamMay 24 22:07:16 ubuntu-890-base kernel: [ 110.621553] NET: Registered protocol family 10May 24 22:07:16 ubuntu-890-base kernel: [ 110.621781] lo: Disabled Privacy ExtensionsMay 24 22:07:16 ubuntu-890-base kernel: [ 110.622405] ADDRCONF(NETDEV_UP): eth0: link is not readyMay 24 22:16:14 ubuntu-890-base kernel: [ 7509.018980] device eth0 entered promiscuous modeMay 24 22:16:14 ubuntu-890-base kernel: [ 7509.018990] audit(1243217774.339:2): dev=eth0 prom=256 old_prom=0 auid=4294967295May 24 22:16:14 ubuntu-890-base kernel: [ 7509.048914] device eth0 left promiscuous modeMay 24 22:16:14 ubuntu-890-base kernel: [ 7509.048919] audit(1243217774.369:3): dev=eth0 prom=0 old_prom=256 auid=4294967295May 24 22:16:14 ubuntu-890-base kernel: [ 7509.078872] device eth0 entered promiscuous modeMay 24 22:16:14 ubuntu-890-base kernel: [ 7509.078885] audit(1243217774.399:4): dev=eth0 prom=256 old_prom=0 auid=4294967295May 24 22:22:10 ubuntu-890-base kernel: [ 7864.323946] ppdev: user-space parallel port driverMay 24 22:22:10 ubuntu-890-base kernel: [ 7864.649059] audit(1243218130.549:5): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=30700 profile="/usr/sbin/cupsd" namespace="default"May 24 22:48:28 ubuntu-890-base kernel: [ 9440.325914] device eth0 left promiscuous modeMay 24 22:48:28 ubuntu-890-base kernel: [ 9440.325925] audit(1243219708.816:6): dev=eth0 prom=0 old_prom=256 auid=4294967295May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpusetMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpuMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Linux version 2.6.24-23-server (buildd@crested) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Wed Apr 1 22:14:30 UTC 2009 (Ubuntu 2.6.24-23.52-server)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro quiet splashMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] BIOS-provided physical RAM map:May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee0000 - 000000001fee3000 (ACPI NVS)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee3000 - 000000001fef0000 (ACPI data)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fef0000 - 000000001ff00000 (reserved)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] end_pfn_map = 1048576May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] DMI 2.3 present.May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7D60 checksum 0May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP 000F7D60, 0014 (r0 Nvidia)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDT 1FEE3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: FACP 1FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: DSDT 1FEE3180, 906B (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: FACS 1FEE0000, 0040May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: MCFG 1FEEC300, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: APIC 1FEEC240, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] CPU has 2 num_coresMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] No NUMA configuration foundMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Faking a node at 0000000000000000-000000001fee0000May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-000000001fee0000May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Zone PFN ranges:May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] DMA 0 -> 4096May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] DMA32 4096 -> 1048576May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Normal 1048576 -> 1048576May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Movable zone start PFN for each nodeMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] early_node_map[2] active PFN rangesMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] 0: 0 -> 159May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] 0: 256 -> 130784May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] On node 0 totalpages: 130687May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] DMA zone: 56 pages used for memmapMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] DMA zone: 1322 pages reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] DMA zone: 2621 pages, LIFO batch:0May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 1732 pages used for memmapMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 124956 pages, LIFO batch:31May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Normal zone: 0 pages used for memmapMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Movable zone: 0 pages used for memmapMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_overrideMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Processor #0 (Bootup-CPU)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Processor #1May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ9 used by override.May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ14 used by override.May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ15 used by override.May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Setting APIC routing to flatMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:d0100000)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUsMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] PERCPU: Allocating 41952 bytes of per cpu dataMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 127577May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Policy zone: DMA32May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Kernel command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro quiet splashMay 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] Initializing CPU#0May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)May 24 22:49:36 ubuntu-890-base kernel: [ 0.000000] TSC calibrated against PM_TIMERMay 24 22:49:36 ubuntu-890-base kernel: [ 25.573136] Marking TSC unstable due to TSCs unsynchronizedMay 24 22:49:36 ubuntu-890-base kernel: [ 25.573137] time.c: Detected 2411.120 MHz processor.May 24 22:49:36 ubuntu-890-base kernel: [ 25.574506] Console: colour VGA+ 80x25May 24 22:49:36 ubuntu-890-base kernel: [ 25.574509] console [tty0] enabledMay 24 22:49:36 ubuntu-890-base kernel: [ 25.574523] Checking aperture...May 24 22:49:36 ubuntu-890-base kernel: [ 25.574526] CPU 0: aperture @ a332000000 size 32 MBMay 24 22:49:36 ubuntu-890-base kernel: [ 25.574527] Aperture too small (32 MB)May 24 22:49:36 ubuntu-890-base kernel: [ 25.579188] No AGP bridge foundMay 24 22:49:36 ubuntu-890-base kernel: [ 25.584598] Memory: 502152k/523136k available (2526k kernel code, 20596k reserved, 1329k data, 328k init)May 24 22:49:36 ubuntu-890-base kernel: [ 25.584638] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1May 24 22:49:36 ubuntu-890-base kernel: [ 25.732859] Calibrating delay using timer specific routine.. 4825.25 BogoMIPS (lpj=24126295)May 24 22:49:36 ubuntu-890-base kernel: [ 25.732891] Security Framework initializedMay 24 22:49:36 ubuntu-890-base kernel: [ 25.732898] SELinux: Disabled at boot.May 24 22:49:36 ubuntu-890-base kernel: [ 25.732911] AppArmor: AppArmor initializedMay 24 22:49:36 ubuntu-890-base kernel: [ 25.732915] Failure registering capabilities with primary security module.May 24 22:49:36 ubuntu-890-base kernel: [ 25.732962] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)May 24 22:49:36 ubuntu-890-base kernel: [ 25.733333] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)May 24 22:49:36 ubuntu-890-base kernel: [ 25.733530] Mount-cache hash table entries: 256May 24 22:49:36 ubuntu-890-base kernel: [ 25.733677] Initializing cgroup subsys nsMay 24 22:49:36 ubuntu-890-base kernel: [ 25.733681] Initializing cgroup subsys cpuacctMay 24 22:49:36 ubuntu-890-base kernel: [ 25.733693] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 24 22:49:36 ubuntu-890-base kernel: [ 25.733695] CPU: L2 Cache: 512K (64 bytes/line)May 24 22:49:36 ubuntu-890-base kernel: [ 25.733697] CPU 0/0 -> Node 0May 24 22:49:36 ubuntu-890-base kernel: [ 25.733699] CPU: Physical Processor ID: 0May 24 22:49:36 ubuntu-890-base kernel: [ 25.733700] CPU: Processor Core ID: 0May 24 22:49:36 ubuntu-890-base kernel: [ 25.733724] SMP alternatives: switching to UP codeMay 24 22:49:36 ubuntu-890-base kernel: [ 25.734339] Early unpacking initramfs... doneMay 24 22:49:36 ubuntu-890-base kernel: [ 26.038638] ACPI: Core revision 20070126May 24 22:49:36 ubuntu-890-base kernel: [ 26.038704] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.May 24 22:49:36 ubuntu-890-base kernel: [ 26.146152] Using local APIC timer interrupts.May 24 22:49:36 ubuntu-890-base kernel: [ 26.187563] APIC timer calibration result 12557906May 24 22:49:36 ubuntu-890-base kernel: [ 26.187564] Detected 12.557 MHz APIC timer.May 24 22:49:36 ubuntu-890-base kernel: [ 26.187674] SMP alternatives: switching to SMP codeMay 24 22:49:36 ubuntu-890-base kernel: [ 26.188203] Booting processor 1/2 APIC 0x1May 24 22:49:36 ubuntu-890-base kernel: [ 26.198447] Initializing CPU#1May 24 22:49:36 ubuntu-890-base kernel: [ 26.347515] Calibrating delay using timer specific routine.. 4822.29 BogoMIPS (lpj=24111495)May 24 22:49:36 ubuntu-890-base kernel: [ 26.347521] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 24 22:49:36 ubuntu-890-base kernel: [ 26.347522] CPU: L2 Cache: 512K (64 bytes/line)May 24 22:49:36 ubuntu-890-base kernel: [ 26.347524] CPU 1/1 -> Node 0May 24 22:49:36 ubuntu-890-base kernel: [ 26.347526] CPU: Physical Processor ID: 0May 24 22:49:36 ubuntu-890-base kernel: [ 26.347527] CPU: Processor Core ID: 1May 24 22:49:36 ubuntu-890-base kernel: [ 26.347601] AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02May 24 22:49:36 ubuntu-890-base kernel: [ 26.347487] Brought up 2 CPUsMay 24 22:49:36 ubuntu-890-base kernel: [ 26.347593] CPU0 attaching sched-domain:May 24 22:49:36 ubuntu-890-base kernel: [ 26.347595] domain 0: span 00000000,00000003May 24 22:49:36 ubuntu-890-base kernel: [ 26.347597] groups: 00000000,00000001 00000000,00000002May 24 22:49:36 ubuntu-890-base kernel: [ 26.347601] domain 1: span 00000000,00000003May 24 22:49:36 ubuntu-890-base kernel: [ 26.347603] groups: 00000000,00000003May 24 22:49:36 ubuntu-890-base kernel: [ 26.347605] CPU1 attaching sched-domain:May 24 22:49:36 ubuntu-890-base kernel: [ 26.347607] domain 0: span 00000000,00000003May 24 22:49:36 ubuntu-890-base kernel: [ 26.347608] groups: 00000000,00000002 00000000,00000001May 24 22:49:36 ubuntu-890-base kernel: [ 26.347611] domain 1: span 00000000,00000003May 24 22:49:36 ubuntu-890-base kernel: [ 26.347613] groups: 00000000,00000003May 24 22:49:36 ubuntu-890-base kernel: [ 26.347945] net_namespace: 120 bytesMay 24 22:49:36 ubuntu-890-base kernel: [ 26.348325] Time: 22:49:10 Date: 05/24/09May 24 22:49:36 ubuntu-890-base kernel: [ 26.348361] NET: Registered protocol family 16May 24 22:49:36 ubuntu-890-base kernel: [ 26.348561] ACPI: bus type pci registeredMay 24 22:49:36 ubuntu-890-base kernel: [ 26.348625] PCI: Using configuration type 1May 24 22:49:36 ubuntu-890-base kernel: [ 26.350217] ACPI: EC: Look up EC in DSDTMay 24 22:49:36 ubuntu-890-base kernel: [ 26.358219] ACPI: Interpreter enabledMay 24 22:49:36 ubuntu-890-base kernel: [ 26.358221] ACPI: (supports S0 S1 S3 S4 S5)May 24 22:49:36 ubuntu-890-base kernel: [ 26.358238] ACPI: Using IOAPIC for interrupt routingMay 24 22:49:36 ubuntu-890-base kernel: [ 26.369221] ACPI: PCI Root Bridge [PCI0] (0000:00)May 24 22:49:36 ubuntu-890-base kernel: [ 26.369894] PCI: Transparent bridge - 0000:00:06.0May 24 22:49:36 ubuntu-890-base kernel: [ 26.370351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]May 24 22:49:36 ubuntu-890-base kernel: [ 26.370784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]May 24 22:49:36 ubuntu-890-base kernel: [ 26.469954] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.470160] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.470360] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.470561] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.470761] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.470963] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.471164] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.471364] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.471565] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.471770] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.471972] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.472173] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.472378] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.472579] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.472780] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.472982] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.473182] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.473383] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.473585] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.473786] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)May 24 22:49:36 ubuntu-890-base kernel: [ 26.474028] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.474261] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.474493] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.474725] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.474957] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.475189] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.475420] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.475652] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.475885] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.476120] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.476354] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.476588] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.476822] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.477056] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.477305] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.477544] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.477778] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.478011] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.478243] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.478476] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0May 24 22:49:36 ubuntu-890-base kernel: [ 26.478621] Linux Plug and Play Support v0.97 (c) Adam BelayMay 24 22:49:36 ubuntu-890-base kernel: [ 26.478650] pnp: PnP ACPI initMay 24 22:49:36 ubuntu-890-base kernel: [ 26.478660] ACPI: bus type pnp registeredMay 24 22:49:36 ubuntu-890-base kernel: [ 26.484553] pnpacpi: exceeded the max number of mem resources: 12May 24 22:49:36 ubuntu-890-base kernel: [ 26.484667] pnp: PnP ACPI: found 13 devicesMay 24 22:49:36 ubuntu-890-base kernel: [ 26.484670] ACPI: ACPI bus type pnp unregisteredMay 24 22:49:36 ubuntu-890-base kernel: [ 26.484898] PCI: Using ACPI for IRQ routingMay 24 22:49:36 ubuntu-890-base kernel: [ 26.484902] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportMay 24 22:49:36 ubuntu-890-base kernel: [ 26.517089] NET: Registered protocol family 8May 24 22:49:36 ubuntu-890-base kernel: [ 26.517091] NET: Registered protocol family 20May 24 22:49:36 ubuntu-890-base kernel: [ 26.517116] NetLabel: InitializingMay 24 22:49:36 ubuntu-890-base kernel: [ 26.517118] NetLabel: domain hash size = 128May 24 22:49:36 ubuntu-890-base kernel: [ 26.517119] NetLabel: protocols = UNLABELED CIPSOv4May 24 22:49:36 ubuntu-890-base kernel: [ 26.517132] NetLabel: unlabeled traffic allowed by defaultMay 24 22:49:36 ubuntu-890-base kernel: [ 26.517241] AppArmor: AppArmor Filesystem EnabledMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547022] system 00:01: ioport range 0x1000-0x107f has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547025] system 00:01: ioport range 0x1080-0x10ff has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547027] system 00:01: ioport range 0x1400-0x147f has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547029] system 00:01: ioport range 0x1480-0x14ff has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547031] system 00:01: ioport range 0x1800-0x187f has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547033] system 00:01: ioport range 0x1880-0x18ff has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547040] system 00:02: ioport range 0x4d0-0x4d1 has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547042] system 00:02: ioport range 0x800-0x87f has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547044] system 00:02: ioport range 0x290-0x297 has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547055] system 00:0b: iomem range 0x0-0x0 could not be reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547060] system 00:0c: iomem range 0xd5800-0xd7fff has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547062] system 00:0c: iomem range 0xf0000-0xf7fff could not be reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547064] system 00:0c: iomem range 0xf8000-0xfbfff could not be reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547066] system 00:0c: iomem range 0xfc000-0xfffff could not be reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547068] system 00:0c: iomem range 0x1fee0000-0x1fefffff could not be reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547071] system 00:0c: iomem range 0xffff0000-0xffffffff has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547076] system 00:0c: iomem range 0x0-0x9ffff could not be reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547078] system 00:0c: iomem range 0x100000-0x1fedffff could not be reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547080] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547082] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547084] system 00:0c: iomem range 0xfefff000-0xfeffffff has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547086] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reservedMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547459] PCI: Bridge: 0000:00:06.0May 24 22:49:36 ubuntu-890-base kernel: [ 26.547460] IO window: 9000-9fffMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547463] MEM window: fde00000-fdefffffMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547465] PREFETCH window: fd000000-fd7fffffMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547467] PCI: Bridge: 0000:00:0a.0May 24 22:49:36 ubuntu-890-base kernel: [ 26.547468] IO window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547470] MEM window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547471] PREFETCH window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547473] PCI: Bridge: 0000:00:0b.0May 24 22:49:36 ubuntu-890-base kernel: [ 26.547474] IO window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547475] MEM window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547477] PREFETCH window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547478] PCI: Bridge: 0000:00:0c.0May 24 22:49:36 ubuntu-890-base kernel: [ 26.547479] IO window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547481] MEM window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547482] PREFETCH window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547484] PCI: Bridge: 0000:00:0d.0May 24 22:49:36 ubuntu-890-base kernel: [ 26.547485] IO window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547486] MEM window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547488] PREFETCH window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547490] PCI: Bridge: 0000:00:0e.0May 24 22:49:36 ubuntu-890-base kernel: [ 26.547491] IO window: 7000-8fffMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547493] MEM window: fdd00000-fddfffffMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547494] PREFETCH window: disabled.May 24 22:49:36 ubuntu-890-base kernel: [ 26.547496] PCI: Bridge: 0000:00:0f.0May 24 22:49:36 ubuntu-890-base kernel: [ 26.547497] IO window: 6000-6fffMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547499] MEM window: fa000000-fcffffffMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547501] PREFETCH window: e0000000-efffffffMay 24 22:49:36 ubuntu-890-base kernel: [ 26.547509] PCI: Setting latency timer of device 0000:00:06.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 26.547519] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 26.547524] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 26.547530] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 26.547535] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 26.547540] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 26.547545] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 26.547556] NET: Registered protocol family 2May 24 22:49:36 ubuntu-890-base kernel: [ 26.556974] Time: acpi_pm clocksource has been installed.May 24 22:49:36 ubuntu-890-base kernel: [ 26.556991] Switched to high resolution mode on CPU 0May 24 22:49:36 ubuntu-890-base kernel: [ 26.557301] Switched to high resolution mode on CPU 1May 24 22:49:36 ubuntu-890-base kernel: [ 26.637047] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)May 24 22:49:36 ubuntu-890-base kernel: [ 26.637264] TCP established hash table entries: 16384 (order: 6, 262144 bytes)May 24 22:49:36 ubuntu-890-base kernel: [ 26.637461] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)May 24 22:49:36 ubuntu-890-base kernel: [ 26.637627] TCP: Hash tables configured (established 16384 bind 16384)May 24 22:49:36 ubuntu-890-base kernel: [ 26.637629] TCP reno registeredMay 24 22:49:36 ubuntu-890-base kernel: [ 26.666954] checking if image is initramfs... it isMay 24 22:49:36 ubuntu-890-base kernel: [ 27.252056] Freeing initrd memory: 7986k freedMay 24 22:49:36 ubuntu-890-base kernel: [ 27.259268] audit: initializing netlink socket (disabled)May 24 22:49:36 ubuntu-890-base kernel: [ 27.259282] audit(1243205350.670:1): initializedMay 24 22:49:36 ubuntu-890-base kernel: [ 27.259407] Total HugeTLB memory allocated, 0May 24 22:49:36 ubuntu-890-base kernel: [ 27.261142] VFS: Disk quotas dquot_6.5.1May 24 22:49:36 ubuntu-890-base kernel: [ 27.261217] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)May 24 22:49:36 ubuntu-890-base kernel: [ 27.261410] io scheduler noop registeredMay 24 22:49:36 ubuntu-890-base kernel: [ 27.261412] io scheduler anticipatory registeredMay 24 22:49:36 ubuntu-890-base kernel: [ 27.261414] io scheduler deadline registered (default)May 24 22:49:36 ubuntu-890-base kernel: [ 27.261504] io scheduler cfq registeredMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286103] pci 0000:00:05.0: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286120] pci 0000:00:05.1: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286132] pci 0000:00:05.2: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286144] pci 0000:00:06.0: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286157] pci 0000:00:06.1: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286171] pci 0000:00:08.0: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286186] pci 0000:00:09.0: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286198] pci 0000:00:0a.0: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286211] pci 0000:00:0b.0: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286224] pci 0000:00:0c.0: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286236] pci 0000:00:0d.0: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286249] pci 0000:00:0e.0: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286261] pci 0000:00:0f.0: Enabling HT MSI MappingMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286282] Boot video device is 0000:07:00.0May 24 22:49:36 ubuntu-890-base kernel: [ 27.286452] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 27.286471] assign_interrupt_mode Found MSI capabilityMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286488] Allocate Port Service[0000:00:0a.0:pcie00]May 24 22:49:36 ubuntu-890-base kernel: [ 27.286544] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 27.286560] assign_interrupt_mode Found MSI capabilityMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286573] Allocate Port Service[0000:00:0b.0:pcie00]May 24 22:49:36 ubuntu-890-base kernel: [ 27.286623] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 27.286640] assign_interrupt_mode Found MSI capabilityMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286652] Allocate Port Service[0000:00:0c.0:pcie00]May 24 22:49:36 ubuntu-890-base kernel: [ 27.286702] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 27.286718] assign_interrupt_mode Found MSI capabilityMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286731] Allocate Port Service[0000:00:0d.0:pcie00]May 24 22:49:36 ubuntu-890-base kernel: [ 27.286796] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 27.286812] assign_interrupt_mode Found MSI capabilityMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286824] Allocate Port Service[0000:00:0e.0:pcie00]May 24 22:49:36 ubuntu-890-base kernel: [ 27.286873] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 27.286889] assign_interrupt_mode Found MSI capabilityMay 24 22:49:36 ubuntu-890-base kernel: [ 27.286901] Allocate Port Service[0000:00:0f.0:pcie00]May 24 22:49:36 ubuntu-890-base kernel: [ 27.310740] Real Time Clock Driver v1.12acMay 24 22:49:36 ubuntu-890-base kernel: [ 27.310848] Linux agpgart interface v0.102May 24 22:49:36 ubuntu-890-base kernel: [ 27.310850] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledMay 24 22:49:36 ubuntu-890-base kernel: [ 27.311003] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 24 22:49:36 ubuntu-890-base kernel: [ 27.311523] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 24 22:49:36 ubuntu-890-base kernel: [ 27.312207] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeMay 24 22:49:36 ubuntu-890-base kernel: [ 27.312270] input: Macintosh mouse button emulation as /devices/virtual/input/input0May 24 22:49:36 ubuntu-890-base kernel: [ 27.312358] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1May 24 22:49:36 ubuntu-890-base kernel: [ 27.312360] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnpMay 24 22:49:36 ubuntu-890-base kernel: [ 27.312459] serio: i8042 KBD port at 0x60,0x64 irq 1May 24 22:49:36 ubuntu-890-base kernel: [ 27.336513] mice: PS/2 mouse device common for all miceMay 24 22:49:36 ubuntu-890-base kernel: [ 27.336553] cpuidle: using governor ladderMay 24 22:49:36 ubuntu-890-base kernel: [ 27.336555] cpuidle: using governor menuMay 24 22:49:36 ubuntu-890-base kernel: [ 27.336701] NET: Registered protocol family 1May 24 22:49:36 ubuntu-890-base kernel: [ 27.336800] registered taskstats version 1May 24 22:49:36 ubuntu-890-base kernel: [ 27.336979] Magic number: 9:918:856May 24 22:49:36 ubuntu-890-base kernel: [ 27.337056] hash matches device ptyv8May 24 22:49:36 ubuntu-890-base kernel: [ 27.337065] hash matches device ptysbMay 24 22:49:36 ubuntu-890-base kernel: [ 27.337118] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)May 24 22:49:36 ubuntu-890-base kernel: [ 27.337121] BIOS EDD facility v0.16 2004-Jun-25, 6 devices foundMay 24 22:49:36 ubuntu-890-base kernel: [ 27.337320] Freeing unused kernel memory: 328k freedMay 24 22:49:36 ubuntu-890-base kernel: [ 27.337792] Write protecting the kernel read-only data: 1044kMay 24 22:49:36 ubuntu-890-base kernel: [ 27.368350] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1May 24 22:49:36 ubuntu-890-base kernel: [ 28.521940] fuse init (API version 7.9)May 24 22:49:36 ubuntu-890-base kernel: [ 28.534201] ACPI: Fan [FAN] (on)May 24 22:49:36 ubuntu-890-base kernel: [ 28.540195] ACPI: Thermal Zone [THRM] (40 C)May 24 22:49:36 ubuntu-890-base kernel: [ 28.865847] usbcore: registered new interface driver usbfsMay 24 22:49:36 ubuntu-890-base kernel: [ 28.865873] usbcore: registered new interface driver hubMay 24 22:49:36 ubuntu-890-base kernel: [ 28.866948] usbcore: registered new device driver usbMay 24 22:49:36 ubuntu-890-base kernel: [ 28.868888] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverMay 24 22:49:36 ubuntu-890-base kernel: [ 28.869367] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23May 24 22:49:36 ubuntu-890-base kernel: [ 28.869380] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23May 24 22:49:36 ubuntu-890-base kernel: [ 28.869601] PCI: Setting latency timer of device 0000:00:02.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 28.869608] ohci_hcd 0000:00:02.0: OHCI Host ControllerMay 24 22:49:36 ubuntu-890-base kernel: [ 28.869863] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1May 24 22:49:36 ubuntu-890-base kernel: [ 28.869885] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000May 24 22:49:36 ubuntu-890-base kernel: [ 28.894722] SCSI subsystem initializedMay 24 22:49:36 ubuntu-890-base kernel: [ 28.925214] usb usb1: configuration #1 chosen from 1 choiceMay 24 22:49:36 ubuntu-890-base kernel: [ 28.925237] hub 1-0:1.0: USB hub foundMay 24 22:49:36 ubuntu-890-base kernel: [ 28.925245] hub 1-0:1.0: 10 ports detectedMay 24 22:49:36 ubuntu-890-base kernel: [ 28.968886] libata version 3.00 loaded.May 24 22:49:36 ubuntu-890-base kernel: [ 29.017822] Floppy drive(s): fd0 is 1.44MMay 24 22:49:36 ubuntu-890-base kernel: [ 29.033671] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22May 24 22:49:36 ubuntu-890-base kernel: [ 29.033683] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22May 24 22:49:36 ubuntu-890-base kernel: [ 29.033835] PCI: Setting latency timer of device 0000:00:02.1 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 29.033842] ehci_hcd 0000:00:02.1: EHCI Host ControllerMay 24 22:49:36 ubuntu-890-base kernel: [ 29.033902] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2May 24 22:49:36 ubuntu-890-base kernel: [ 29.033929] ehci_hcd 0000:00:02.1: debug port 1May 24 22:49:36 ubuntu-890-base kernel: [ 29.033932] PCI: cache line size of 64 is not supported by device 0000:00:02.1May 24 22:49:36 ubuntu-890-base kernel: [ 29.033943] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000May 24 22:49:36 ubuntu-890-base kernel: [ 29.037050] FDC 0 is a post-1991 82077May 24 22:49:36 ubuntu-890-base kernel: [ 29.055584] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004May 24 22:49:36 ubuntu-890-base kernel: [ 29.055748] usb usb2: configuration #1 chosen from 1 choiceMay 24 22:49:36 ubuntu-890-base kernel: [ 29.055768] hub 2-0:1.0: USB hub foundMay 24 22:49:36 ubuntu-890-base kernel: [ 29.055775] hub 2-0:1.0: 10 ports detectedMay 24 22:49:36 ubuntu-890-base kernel: [ 29.166076] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17May 24 22:49:36 ubuntu-890-base kernel: [ 29.166091] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17May 24 22:49:36 ubuntu-890-base kernel: [ 29.166302] 3c59x: Donald Becker and others.May 24 22:49:36 ubuntu-890-base kernel: [ 29.166321] 0000:01:07.0: 3Com PCI 3c905C Tornado at ffffc20000174000.May 24 22:49:36 ubuntu-890-base kernel: [ 29.188502] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19May 24 22:49:36 ubuntu-890-base kernel: [ 29.188514] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19May 24 22:49:36 ubuntu-890-base kernel: [ 29.238582] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8]May 24 22:49:36 ubuntu-890-base kernel: [ 29.239517] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.May 24 22:49:36 ubuntu-890-base kernel: [ 29.239943] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21May 24 22:49:36 ubuntu-890-base kernel: [ 29.239952] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21May 24 22:49:36 ubuntu-890-base kernel: [ 29.239958] PCI: Setting latency timer of device 0000:00:08.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 29.762132] forcedeth 0000:00:08.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:f2:20May 24 22:49:36 ubuntu-890-base kernel: [ 29.762137] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 24 22:49:36 ubuntu-890-base kernel: [ 29.762554] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 20May 24 22:49:36 ubuntu-890-base kernel: [ 29.762564] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AMC1] -> GSI 20 (level, low) -> IRQ 20May 24 22:49:36 ubuntu-890-base kernel: [ 29.762569] PCI: Setting latency timer of device 0000:00:09.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 29.891456] usb 2-4: new high speed USB device using ehci_hcd and address 3May 24 22:49:36 ubuntu-890-base kernel: [ 30.043762] usb 2-4: configuration #1 chosen from 1 choiceMay 24 22:49:36 ubuntu-890-base kernel: [ 30.291260] forcedeth 0000:00:09.0: ifname eth2, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:fd:c5May 24 22:49:36 ubuntu-890-base kernel: [ 30.291265] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 24 22:49:36 ubuntu-890-base kernel: [ 30.291480] PCI: Setting latency timer of device 0000:00:04.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 30.291887] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23May 24 22:49:36 ubuntu-890-base kernel: [ 30.291890] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23May 24 22:49:36 ubuntu-890-base kernel: [ 30.291913] PCI: Setting latency timer of device 0000:00:05.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 30.291918] ACPI: PCI interrupt for device 0000:00:05.0 disabledMay 24 22:49:36 ubuntu-890-base kernel: [ 30.292228] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22May 24 22:49:36 ubuntu-890-base kernel: [ 30.292230] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22May 24 22:49:36 ubuntu-890-base kernel: [ 30.292244] PCI: Setting latency timer of device 0000:00:05.1 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 30.292249] ACPI: PCI interrupt for device 0000:00:05.1 disabledMay 24 22:49:36 ubuntu-890-base kernel: [ 30.292555] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21May 24 22:49:36 ubuntu-890-base kernel: [ 30.292557] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21May 24 22:49:36 ubuntu-890-base kernel: [ 30.292576] PCI: Setting latency timer of device 0000:00:05.2 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 30.292582] ACPI: PCI interrupt for device 0000:00:05.2 disabledMay 24 22:49:36 ubuntu-890-base kernel: [ 30.292607] PCI: Enabling device 0000:06:00.1 (0000 -> 0001)May 24 22:49:36 ubuntu-890-base kernel: [ 30.292905] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16May 24 22:49:36 ubuntu-890-base kernel: [ 30.292914] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 24 22:49:36 ubuntu-890-base kernel: [ 30.292934] PCI: Setting latency timer of device 0000:06:00.1 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 30.292943] ACPI: PCI interrupt for device 0000:06:00.1 disabledMay 24 22:49:36 ubuntu-890-base kernel: [ 30.293404] ahci 0000:06:00.0: version 3.0May 24 22:49:36 ubuntu-890-base kernel: [ 30.293744] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16May 24 22:49:36 ubuntu-890-base kernel: [ 30.293747] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16May 24 22:49:36 ubuntu-890-base kernel: [ 30.383334] usb 1-3: new low speed USB device using ohci_hcd and address 2May 24 22:49:36 ubuntu-890-base kernel: [ 30.550655] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7a6f6]May 24 22:49:36 ubuntu-890-base kernel: [ 30.610602] usb 1-3: configuration #1 chosen from 1 choiceMay 24 22:49:36 ubuntu-890-base kernel: [ 30.631858] usbcore: registered new interface driver hiddevMay 24 22:49:36 ubuntu-890-base kernel: [ 30.634054] hiddev96hidraw0: USB HID v1.00 Device [Lexmark 6500 Series] on usb-0000:00:02.1-4May 24 22:49:36 ubuntu-890-base kernel: [ 30.639404] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.0/input/input2May 24 22:49:36 ubuntu-890-base kernel: [ 30.700188] input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3May 24 22:49:36 ubuntu-890-base kernel: [ 30.708413] hiddev97hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-3May 24 22:49:36 ubuntu-890-base kernel: [ 30.708430] usbcore: registered new interface driver usbhidMay 24 22:49:36 ubuntu-890-base kernel: [ 30.708434] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driverMay 24 22:49:36 ubuntu-890-base kernel: [ 31.299133] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA modeMay 24 22:49:36 ubuntu-890-base kernel: [ 31.299139] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part May 24 22:49:36 ubuntu-890-base kernel: [ 31.299144] PCI: Setting latency timer of device 0000:06:00.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 31.299387] scsi0 : ahciMay 24 22:49:36 ubuntu-890-base kernel: [ 31.299444] scsi1 : ahciMay 24 22:49:36 ubuntu-890-base kernel: [ 31.299466] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16May 24 22:49:36 ubuntu-890-base kernel: [ 31.299469] ata2: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16May 24 22:49:36 ubuntu-890-base kernel: [ 31.648538] ata1: SATA link down (SStatus 0 SControl 300)May 24 22:49:36 ubuntu-890-base kernel: [ 31.997957] ata2: SATA link down (SStatus 0 SControl 300)May 24 22:49:36 ubuntu-890-base kernel: [ 32.002309] pata_amd 0000:00:04.0: version 0.3.10May 24 22:49:36 ubuntu-890-base kernel: [ 32.002381] PCI: Setting latency timer of device 0000:00:04.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 32.005113] scsi2 : pata_amdMay 24 22:49:36 ubuntu-890-base kernel: [ 32.007464] scsi3 : pata_amdMay 24 22:49:36 ubuntu-890-base kernel: [ 32.008036] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14May 24 22:49:36 ubuntu-890-base kernel: [ 32.008038] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15May 24 22:49:36 ubuntu-890-base kernel: [ 32.043037] usbcore: registered new interface driver libusualMay 24 22:49:36 ubuntu-890-base kernel: [ 32.046738] Initializing USB Mass Storage driver...May 24 22:49:36 ubuntu-890-base kernel: [ 32.046842] scsi4 : SCSI emulation for USB Mass Storage devicesMay 24 22:49:36 ubuntu-890-base kernel: [ 32.046703] usb-storage: device found at 3May 24 22:49:36 ubuntu-890-base kernel: [ 32.046706] usb-storage: waiting for device to settle before scanningMay 24 22:49:36 ubuntu-890-base kernel: [ 32.046913] usbcore: registered new interface driver usb-storageMay 24 22:49:36 ubuntu-890-base kernel: [ 32.046916] USB Mass Storage support registered.May 24 22:49:36 ubuntu-890-base kernel: [ 32.539970] ata3.01: ATAPI: LITE-ON LTR-52327S, QS06, max UDMA/33May 24 22:49:36 ubuntu-890-base kernel: [ 32.739575] ata3.01: configured for UDMA/33May 24 22:49:36 ubuntu-890-base kernel: [ 32.739415] ata4: port disabled. ignoring.May 24 22:49:36 ubuntu-890-base kernel: [ 32.751790] scsi 2:0:1:0: CD-ROM LITE-ON LTR-52327S QS06 PQ: 0 ANSI: 5May 24 22:49:36 ubuntu-890-base kernel: [ 32.751685] sata_nv 0000:00:05.0: version 3.5May 24 22:49:36 ubuntu-890-base kernel: [ 32.751700] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23May 24 22:49:36 ubuntu-890-base kernel: [ 32.751939] PCI: Setting latency timer of device 0000:00:05.0 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 32.752029] scsi5 : sata_nvMay 24 22:49:36 ubuntu-890-base kernel: [ 32.752095] scsi6 : sata_nvMay 24 22:49:36 ubuntu-890-base kernel: [ 32.752278] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23May 24 22:49:36 ubuntu-890-base kernel: [ 32.752280] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23May 24 22:49:36 ubuntu-890-base kernel: [ 33.235890] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)May 24 22:49:36 ubuntu-890-base kernel: [ 33.281972] ata5.00: ATA-7: WDC WD2500JS-00SGB0, 20.06C03, max UDMA/133May 24 22:49:36 ubuntu-890-base kernel: [ 33.281976] ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)May 24 22:49:36 ubuntu-890-base kernel: [ 33.298819] ata5.00: configured for UDMA/133May 24 22:49:36 ubuntu-890-base kernel: [ 33.625233] ata6: SATA link down (SStatus 0 SControl 300)May 24 22:49:36 ubuntu-890-base kernel: [ 33.635595] scsi 5:0:0:0: Direct-Access ATA WDC WD2500JS-00S 20.0 PQ: 0 ANSI: 5May 24 22:49:36 ubuntu-890-base kernel: [ 33.635688] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22May 24 22:49:36 ubuntu-890-base kernel: [ 33.635923] PCI: Setting latency timer of device 0000:00:05.1 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 33.636021] scsi7 : sata_nvMay 24 22:49:36 ubuntu-890-base kernel: [ 33.636081] scsi8 : sata_nvMay 24 22:49:36 ubuntu-890-base kernel: [ 33.636269] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22May 24 22:49:36 ubuntu-890-base kernel: [ 33.636272] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22May 24 22:49:36 ubuntu-890-base kernel: [ 33.974648] ata7: SATA link down (SStatus 0 SControl 300)May 24 22:49:36 ubuntu-890-base kernel: [ 34.304107] ata8: SATA link down (SStatus 0 SControl 300)May 24 22:49:36 ubuntu-890-base kernel: [ 34.314419] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21May 24 22:49:36 ubuntu-890-base kernel: [ 34.314634] PCI: Setting latency timer of device 0000:00:05.2 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 34.314737] scsi9 : sata_nvMay 24 22:49:36 ubuntu-890-base kernel: [ 34.314803] scsi10 : sata_nvMay 24 22:49:36 ubuntu-890-base kernel: [ 34.314997] ata9: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21May 24 22:49:36 ubuntu-890-base kernel: [ 34.314999] ata10: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21May 24 22:49:36 ubuntu-890-base kernel: [ 34.643536] ata9: SATA link down (SStatus 0 SControl 300)May 24 22:49:36 ubuntu-890-base kernel: [ 34.982973] ata10: SATA link down (SStatus 0 SControl 300)May 24 22:49:36 ubuntu-890-base kernel: [ 34.993316] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 24 22:49:36 ubuntu-890-base kernel: [ 34.993369] PCI: Setting latency timer of device 0000:06:00.1 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 34.993427] scsi11 : pata_jmicronMay 24 22:49:36 ubuntu-890-base kernel: [ 34.993496] scsi12 : pata_jmicronMay 24 22:49:36 ubuntu-890-base kernel: [ 34.993520] ata11: PATA max UDMA/100 cmd 0x8c00 ctl 0x8800 bmdma 0x7c00 irq 16May 24 22:49:36 ubuntu-890-base kernel: [ 34.993522] ata12: PATA max UDMA/100 cmd 0x8400 ctl 0x8000 bmdma 0x7c08 irq 16May 24 22:49:36 ubuntu-890-base kernel: [ 35.000223] Driver 'sr' needs updating - please use bus_type methodsMay 24 22:49:36 ubuntu-890-base kernel: [ 35.073585] sr0: scsi3-mmc drive: 186x/52x writer cd/rw xa/form2 cdda trayMay 24 22:49:36 ubuntu-890-base kernel: [ 35.073591] Uniform CD-ROM driver Revision: 3.20May 24 22:49:36 ubuntu-890-base kernel: [ 35.073647] sr 2:0:1:0: Attached scsi CD-ROM sr0May 24 22:49:36 ubuntu-890-base kernel: [ 35.078822] sr 2:0:1:0: Attached scsi generic sg0 type 5May 24 22:49:36 ubuntu-890-base kernel: [ 35.078843] scsi 5:0:0:0: Attached scsi generic sg1 type 0May 24 22:49:36 ubuntu-890-base kernel: [ 35.332290] Driver 'sd' needs updating - please use bus_type methodsMay 24 22:49:36 ubuntu-890-base kernel: [ 35.332405] sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 24 22:49:36 ubuntu-890-base kernel: [ 35.332416] sd 5:0:0:0: [sda] Write Protect is offMay 24 22:49:36 ubuntu-890-base kernel: [ 35.332418] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00May 24 22:49:36 ubuntu-890-base kernel: [ 35.332432] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 24 22:49:36 ubuntu-890-base kernel: [ 35.332474] sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 24 22:49:36 ubuntu-890-base kernel: [ 35.332481] sd 5:0:0:0: [sda] Write Protect is offMay 24 22:49:36 ubuntu-890-base kernel: [ 35.332482] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00May 24 22:49:36 ubuntu-890-base kernel: [ 35.332494] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 24 22:49:36 ubuntu-890-base kernel: [ 35.332497] sda: sda1 sda2 < sda5 sda6 >May 24 22:49:36 ubuntu-890-base kernel: [ 35.364627] sd 5:0:0:0: [sda] Attached SCSI diskMay 24 22:49:36 ubuntu-890-base kernel: [ 37.029947] usb-storage: device scan completeMay 24 22:49:36 ubuntu-890-base kernel: [ 37.032269] scsi 4:0:0:0: Direct-Access Lexmark USB Mass Storage 200 PQ: 0 ANSI: 0May 24 22:49:36 ubuntu-890-base kernel: [ 37.036892] sd 4:0:0:0: [sdb] Attached SCSI removable diskMay 24 22:49:36 ubuntu-890-base kernel: [ 37.036933] sd 4:0:0:0: Attached scsi generic sg2 type 0May 24 22:49:36 ubuntu-890-base kernel: [ 39.737539] Attempting manual resumeMay 24 22:49:36 ubuntu-890-base kernel: [ 39.737543] swsusp: Resume From Partition 8:6May 24 22:49:36 ubuntu-890-base kernel: [ 39.737545] PM: Checking swsusp image.May 24 22:49:36 ubuntu-890-base kernel: [ 39.737925] PM: Resume from disk failed.May 24 22:49:36 ubuntu-890-base kernel: [ 39.772041] kjournald starting. Commit interval 5 secondsMay 24 22:49:36 ubuntu-890-base kernel: [ 39.772264] EXT3-fs: mounted filesystem with ordered data mode.May 24 22:49:36 ubuntu-890-base kernel: [ 45.088883] input: PC Speaker as /devices/platform/pcspkr/input/input3May 24 22:49:36 ubuntu-890-base kernel: [ 45.391832] pci_hotplug: PCI Hot Plug PCI Core version: 0.5May 24 22:49:36 ubuntu-890-base kernel: [ 45.400105] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4May 24 22:49:36 ubuntu-890-base kernel: [ 45.477614] input: Power Button (FF) as /devices/virtual/input/input4May 24 22:49:36 ubuntu-890-base kernel: [ 45.498432] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00May 24 22:49:36 ubuntu-890-base kernel: [ 45.498453] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40May 24 22:49:36 ubuntu-890-base kernel: [ 45.563324] parport_pc 00:09: reported by Plug and Play ACPIMay 24 22:49:36 ubuntu-890-base kernel: [ 45.563389] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]May 24 22:49:36 ubuntu-890-base kernel: [ 45.737877] ACPI: Power Button (FF) [PWRF]May 24 22:49:36 ubuntu-890-base kernel: [ 45.737942] input: Power Button (CM) as /devices/virtual/input/input5May 24 22:49:36 ubuntu-890-base kernel: [ 45.877639] ACPI: Power Button (CM) [PWRB]May 24 22:49:36 ubuntu-890-base kernel: [ 46.155036] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20May 24 22:49:36 ubuntu-890-base kernel: [ 46.155042] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20May 24 22:49:36 ubuntu-890-base kernel: [ 46.155184] PCI: Setting latency timer of device 0000:00:06.1 to 64May 24 22:49:36 ubuntu-890-base kernel: [ 46.201043] udev: renamed network interface eth1 to eth0May 24 22:49:36 ubuntu-890-base kernel: [ 46.202794] udev: renamed network interface eth2 to eth1May 24 22:49:36 ubuntu-890-base kernel: [ 46.217681] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x043D pid 0x010FMay 24 22:49:36 ubuntu-890-base kernel: [ 46.217700] usbcore: registered new interface driver usblpMay 24 22:49:36 ubuntu-890-base kernel: [ 46.227623] eth0: no link during initialization.May 24 22:49:36 ubuntu-890-base kernel: [ 46.295120] udev: renamed network interface eth0_rename to eth2May 24 22:49:36 ubuntu-890-base kernel: [ 47.426298] NET: Registered protocol family 17May 24 22:49:36 ubuntu-890-base kernel: [ 48.101838] loop: module loadedMay 24 22:49:36 ubuntu-890-base kernel: [ 48.120017] lp0: using parport0 (interrupt-driven).May 24 22:49:36 ubuntu-890-base kernel: [ 48.302722] Adding 1494004k swap on /dev/sda6. Priority:-1 extents:1 across:1494004kMay 24 22:49:36 ubuntu-890-base kernel: [ 48.863225] EXT3 FS on sda5, internal journalMay 24 22:49:36 ubuntu-890-base kernel: [ 49.021825] device-mapper: uevent: version 1.0.3May 24 22:49:36 ubuntu-890-base kernel: [ 49.021858] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.comMay 24 22:49:36 ubuntu-890-base kernel: [ 50.405423] ip_tables: (C) 2000-2006 Netfilter Core TeamMay 24 22:49:36 ubuntu-890-base kernel: [ 52.673986] No dock devices found.May 24 22:49:38 ubuntu-890-base kernel: [ 54.943306] audit(1243219778.923:2): type=1503 operation="capable" name="sys_resource" pid=5552 profile="/usr/sbin/named" namespace="default"May 24 22:49:38 ubuntu-890-base kernel: [ 54.997252] NET: Registered protocol family 10May 24 22:49:38 ubuntu-890-base kernel: [ 54.997491] lo: Disabled Privacy ExtensionsMay 24 22:49:38 ubuntu-890-base kernel: [ 54.998105] ADDRCONF(NETDEV_UP): eth0: link is not readyMay 24 22:49:50 ubuntu-890-base kernel: [ 66.744534] ppdev: user-space parallel port driverMay 24 22:49:50 ubuntu-890-base kernel: [ 66.831775] audit(1243219790.823:3): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=6019 profile="/usr/sbin/cupsd" namespace="default"May 24 22:49:53 ubuntu-890-base kernel: [ 69.329036] device eth0 entered promiscuous modeMay 24 22:49:53 ubuntu-890-base kernel: [ 69.329046] audit(1243219793.333:4): dev=eth0 prom=256 old_prom=0 auid=4294967295May 24 22:49:53 ubuntu-890-base kernel: [ 69.358984] device eth0 left promiscuous modeMay 24 22:49:53 ubuntu-890-base kernel: [ 69.358996] audit(1243219793.363:5): dev=eth0 prom=0 old_prom=256 auid=4294967295May 24 22:49:53 ubuntu-890-base kernel: [ 69.388932] device eth0 entered promiscuous modeMay 24 22:49:53 ubuntu-890-base kernel: [ 69.388945] audit(1243219793.393:6): dev=eth0 prom=256 old_prom=0 auid=4294967295May 24 22:49:55 ubuntu-890-base kernel: [ 71.232075] eth1: no link during initialization.May 24 22:49:55 ubuntu-890-base kernel: [ 71.232493] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 24 22:49:55 ubuntu-890-base kernel: [ 71.275613] eth2: setting full-duplex.May 24 22:49:55 ubuntu-890-base kernel: [ 71.326777] Bluetooth: Core ver 2.11May 24 22:49:55 ubuntu-890-base kernel: [ 71.341191] NET: Registered protocol family 31May 24 22:49:55 ubuntu-890-base kernel: [ 71.341199] Bluetooth: HCI device and connection manager initializedMay 24 22:49:55 ubuntu-890-base kernel: [ 71.341204] Bluetooth: HCI socket layer initializedMay 24 22:49:55 ubuntu-890-base kernel: [ 71.369555] Bluetooth: L2CAP ver 2.9May 24 22:49:55 ubuntu-890-base kernel: [ 71.369562] Bluetooth: L2CAP socket layer initializedMay 24 22:49:55 ubuntu-890-base kernel: [ 71.385839] Bluetooth: RFCOMM socket layer initializedMay 24 22:49:55 ubuntu-890-base kernel: [ 71.385865] Bluetooth: RFCOMM TTY layer initializedMay 24 22:49:55 ubuntu-890-base kernel: [ 71.385867] Bluetooth: RFCOMM ver 1.8May 24 22:50:12 ubuntu-890-base kernel: [ 89.233826] eth2: no IPv6 routers presentMay 24 22:50:22 ubuntu-890-base kernel: [ 99.477344] device eth0 left promiscuous modeMay 24 22:50:22 ubuntu-890-base kernel: [ 99.477357] audit(1243219822.929:7): dev=eth0 prom=0 old_prom=256 auid=4294967295May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpusetMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpuMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Linux version 2.6.24-24-server (buildd@yellow) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)) #1 SMP Wed Apr 15 15:41:09 UTC 2009 (Ubuntu 2.6.24-24.53-server)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro quiet splashMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] BIOS-provided physical RAM map:May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee0000 - 000000001fee3000 (ACPI NVS)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee3000 - 000000001fef0000 (ACPI data)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fef0000 - 000000001ff00000 (reserved)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] end_pfn_map = 1048576May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] DMI 2.3 present.May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7D60 checksum 0May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP 000F7D60, 0014 (r0 Nvidia)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDT 1FEE3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: FACP 1FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: DSDT 1FEE3180, 906B (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: FACS 1FEE0000, 0040May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: MCFG 1FEEC300, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: APIC 1FEEC240, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] CPU has 2 num_coresMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] No NUMA configuration foundMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Faking a node at 0000000000000000-000000001fee0000May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-000000001fee0000May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Zone PFN ranges:May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] DMA 0 -> 4096May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] DMA32 4096 -> 1048576May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Normal 1048576 -> 1048576May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Movable zone start PFN for each nodeMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] early_node_map[2] active PFN rangesMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] 0: 0 -> 159May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] 0: 256 -> 130784May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] On node 0 totalpages: 130687May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] DMA zone: 56 pages used for memmapMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] DMA zone: 1322 pages reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] DMA zone: 2621 pages, LIFO batch:0May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 1732 pages used for memmapMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 124956 pages, LIFO batch:31May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Normal zone: 0 pages used for memmapMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Movable zone: 0 pages used for memmapMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_overrideMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Processor #0 (Bootup-CPU)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Processor #1May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ9 used by override.May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ14 used by override.May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ15 used by override.May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Setting APIC routing to flatMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:d0100000)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUsMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] PERCPU: Allocating 41952 bytes of per cpu dataMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 127577May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Policy zone: DMA32May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Kernel command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro quiet splashMay 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] Initializing CPU#0May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)May 24 22:51:33 ubuntu-890-base kernel: [ 0.000000] TSC calibrated against PM_TIMERMay 24 22:51:33 ubuntu-890-base kernel: [ 27.878818] Marking TSC unstable due to TSCs unsynchronizedMay 24 22:51:33 ubuntu-890-base kernel: [ 27.878820] time.c: Detected 2411.099 MHz processor.May 24 22:51:33 ubuntu-890-base kernel: [ 27.880195] Console: colour VGA+ 80x25May 24 22:51:33 ubuntu-890-base kernel: [ 27.880198] console [tty0] enabledMay 24 22:51:33 ubuntu-890-base kernel: [ 27.880212] Checking aperture...May 24 22:51:33 ubuntu-890-base kernel: [ 27.880214] CPU 0: aperture @ a332000000 size 32 MBMay 24 22:51:33 ubuntu-890-base kernel: [ 27.880216] Aperture too small (32 MB)May 24 22:51:33 ubuntu-890-base kernel: [ 27.884877] No AGP bridge foundMay 24 22:51:33 ubuntu-890-base kernel: [ 27.890295] Memory: 502148k/523136k available (2527k kernel code, 20600k reserved, 1329k data, 328k init)May 24 22:51:33 ubuntu-890-base kernel: [ 27.890334] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1May 24 22:51:33 ubuntu-890-base kernel: [ 28.038541] Calibrating delay using timer specific routine.. 4825.27 BogoMIPS (lpj=24126369)May 24 22:51:33 ubuntu-890-base kernel: [ 28.038574] Security Framework initializedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.038581] SELinux: Disabled at boot.May 24 22:51:33 ubuntu-890-base kernel: [ 28.038594] AppArmor: AppArmor initializedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.038598] Failure registering capabilities with primary security module.May 24 22:51:33 ubuntu-890-base kernel: [ 28.038645] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)May 24 22:51:33 ubuntu-890-base kernel: [ 28.039017] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)May 24 22:51:33 ubuntu-890-base kernel: [ 28.039214] Mount-cache hash table entries: 256May 24 22:51:33 ubuntu-890-base kernel: [ 28.039361] Initializing cgroup subsys nsMay 24 22:51:33 ubuntu-890-base kernel: [ 28.039365] Initializing cgroup subsys cpuacctMay 24 22:51:33 ubuntu-890-base kernel: [ 28.039378] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 24 22:51:33 ubuntu-890-base kernel: [ 28.039379] CPU: L2 Cache: 512K (64 bytes/line)May 24 22:51:33 ubuntu-890-base kernel: [ 28.039382] CPU 0/0 -> Node 0May 24 22:51:33 ubuntu-890-base kernel: [ 28.039383] CPU: Physical Processor ID: 0May 24 22:51:33 ubuntu-890-base kernel: [ 28.039384] CPU: Processor Core ID: 0May 24 22:51:33 ubuntu-890-base kernel: [ 28.039409] SMP alternatives: switching to UP codeMay 24 22:51:33 ubuntu-890-base kernel: [ 28.040018] Early unpacking initramfs... doneMay 24 22:51:33 ubuntu-890-base kernel: [ 28.357826] ACPI: Core revision 20070126May 24 22:51:33 ubuntu-890-base kernel: [ 28.357902] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.May 24 22:51:33 ubuntu-890-base kernel: [ 28.464786] Using local APIC timer interrupts.May 24 22:51:33 ubuntu-890-base kernel: [ 28.506198] APIC timer calibration result 12557795May 24 22:51:33 ubuntu-890-base kernel: [ 28.506199] Detected 12.557 MHz APIC timer.May 24 22:51:33 ubuntu-890-base kernel: [ 28.506308] SMP alternatives: switching to SMP codeMay 24 22:51:33 ubuntu-890-base kernel: [ 28.506835] Booting processor 1/2 APIC 0x1May 24 22:51:33 ubuntu-890-base kernel: [ 28.517211] Initializing CPU#1May 24 22:51:33 ubuntu-890-base kernel: [ 28.666279] Calibrating delay using timer specific routine.. 4822.22 BogoMIPS (lpj=24111126)May 24 22:51:33 ubuntu-890-base kernel: [ 28.666284] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 24 22:51:33 ubuntu-890-base kernel: [ 28.666286] CPU: L2 Cache: 512K (64 bytes/line)May 24 22:51:33 ubuntu-890-base kernel: [ 28.666288] CPU 1/1 -> Node 0May 24 22:51:33 ubuntu-890-base kernel: [ 28.666289] CPU: Physical Processor ID: 0May 24 22:51:33 ubuntu-890-base kernel: [ 28.666291] CPU: Processor Core ID: 1May 24 22:51:33 ubuntu-890-base kernel: [ 28.666365] AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02May 24 22:51:33 ubuntu-890-base kernel: [ 28.666119] Brought up 2 CPUsMay 24 22:51:33 ubuntu-890-base kernel: [ 28.666224] CPU0 attaching sched-domain:May 24 22:51:33 ubuntu-890-base kernel: [ 28.666227] domain 0: span 00000000,00000003May 24 22:51:33 ubuntu-890-base kernel: [ 28.666229] groups: 00000000,00000001 00000000,00000002May 24 22:51:33 ubuntu-890-base kernel: [ 28.666232] domain 1: span 00000000,00000003May 24 22:51:33 ubuntu-890-base kernel: [ 28.666233] groups: 00000000,00000003May 24 22:51:33 ubuntu-890-base kernel: [ 28.666235] CPU1 attaching sched-domain:May 24 22:51:33 ubuntu-890-base kernel: [ 28.666237] domain 0: span 00000000,00000003May 24 22:51:33 ubuntu-890-base kernel: [ 28.666238] groups: 00000000,00000002 00000000,00000001May 24 22:51:33 ubuntu-890-base kernel: [ 28.666241] domain 1: span 00000000,00000003May 24 22:51:33 ubuntu-890-base kernel: [ 28.666242] groups: 00000000,00000003May 24 22:51:33 ubuntu-890-base kernel: [ 28.666563] net_namespace: 120 bytesMay 24 22:51:33 ubuntu-890-base kernel: [ 28.666936] Time: 22:51:08 Date: 05/24/09May 24 22:51:33 ubuntu-890-base kernel: [ 28.666970] NET: Registered protocol family 16May 24 22:51:33 ubuntu-890-base kernel: [ 28.667157] ACPI: bus type pci registeredMay 24 22:51:33 ubuntu-890-base kernel: [ 28.667245] PCI: Using configuration type 1May 24 22:51:33 ubuntu-890-base kernel: [ 28.668792] ACPI: EC: Look up EC in DSDTMay 24 22:51:33 ubuntu-890-base kernel: [ 28.675987] ACPI: Interpreter enabledMay 24 22:51:33 ubuntu-890-base kernel: [ 28.675990] ACPI: (supports S0 S1 S3 S4 S5)May 24 22:51:33 ubuntu-890-base kernel: [ 28.676005] ACPI: Using IOAPIC for interrupt routingMay 24 22:51:33 ubuntu-890-base kernel: [ 28.686263] ACPI: PCI Root Bridge [PCI0] (0000:00)May 24 22:51:33 ubuntu-890-base kernel: [ 28.686927] PCI: Transparent bridge - 0000:00:06.0May 24 22:51:33 ubuntu-890-base kernel: [ 28.687360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]May 24 22:51:33 ubuntu-890-base kernel: [ 28.687695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]May 24 22:51:33 ubuntu-890-base kernel: [ 28.777102] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.777288] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.777469] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.777650] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.777831] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.778013] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.778195] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.778375] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.778556] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.778740] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.778922] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.779103] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.779289] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.779469] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.779651] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.779834] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.780014] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.780196] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.780377] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.780560] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)May 24 22:51:33 ubuntu-890-base kernel: [ 28.780776] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.780983] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.781190] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.781397] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.781604] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.781810] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.782016] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.782223] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.782432] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.782640] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.782848] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.783056] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.783264] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.783472] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.783680] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.783904] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.784112] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.784320] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.784528] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.784736] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0May 24 22:51:33 ubuntu-890-base kernel: [ 28.784873] Linux Plug and Play Support v0.97 (c) Adam BelayMay 24 22:51:33 ubuntu-890-base kernel: [ 28.784903] pnp: PnP ACPI initMay 24 22:51:33 ubuntu-890-base kernel: [ 28.784912] ACPI: bus type pnp registeredMay 24 22:51:33 ubuntu-890-base kernel: [ 28.790246] pnpacpi: exceeded the max number of mem resources: 12May 24 22:51:33 ubuntu-890-base kernel: [ 28.790358] pnp: PnP ACPI: found 13 devicesMay 24 22:51:33 ubuntu-890-base kernel: [ 28.790360] ACPI: ACPI bus type pnp unregisteredMay 24 22:51:33 ubuntu-890-base kernel: [ 28.790579] PCI: Using ACPI for IRQ routingMay 24 22:51:33 ubuntu-890-base kernel: [ 28.790583] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportMay 24 22:51:33 ubuntu-890-base kernel: [ 28.815765] NET: Registered protocol family 8May 24 22:51:33 ubuntu-890-base kernel: [ 28.815767] NET: Registered protocol family 20May 24 22:51:33 ubuntu-890-base kernel: [ 28.815790] NetLabel: InitializingMay 24 22:51:33 ubuntu-890-base kernel: [ 28.815791] NetLabel: domain hash size = 128May 24 22:51:33 ubuntu-890-base kernel: [ 28.815792] NetLabel: protocols = UNLABELED CIPSOv4May 24 22:51:33 ubuntu-890-base kernel: [ 28.815805] NetLabel: unlabeled traffic allowed by defaultMay 24 22:51:33 ubuntu-890-base kernel: [ 28.815910] AppArmor: AppArmor Filesystem EnabledMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845684] system 00:01: ioport range 0x1000-0x107f has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845686] system 00:01: ioport range 0x1080-0x10ff has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845688] system 00:01: ioport range 0x1400-0x147f has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845690] system 00:01: ioport range 0x1480-0x14ff has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845692] system 00:01: ioport range 0x1800-0x187f has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845694] system 00:01: ioport range 0x1880-0x18ff has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845701] system 00:02: ioport range 0x4d0-0x4d1 has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845703] system 00:02: ioport range 0x800-0x87f has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845705] system 00:02: ioport range 0x290-0x297 has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845716] system 00:0b: iomem range 0x0-0x0 could not be reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845721] system 00:0c: iomem range 0xd5800-0xd7fff has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845723] system 00:0c: iomem range 0xf0000-0xf7fff could not be reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845725] system 00:0c: iomem range 0xf8000-0xfbfff could not be reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845727] system 00:0c: iomem range 0xfc000-0xfffff could not be reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845730] system 00:0c: iomem range 0x1fee0000-0x1fefffff could not be reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845732] system 00:0c: iomem range 0xffff0000-0xffffffff has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845737] system 00:0c: iomem range 0x0-0x9ffff could not be reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845739] system 00:0c: iomem range 0x100000-0x1fedffff could not be reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845741] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845743] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845745] system 00:0c: iomem range 0xfefff000-0xfeffffff has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.845747] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reservedMay 24 22:51:33 ubuntu-890-base kernel: [ 28.846101] PCI: Bridge: 0000:00:06.0May 24 22:51:33 ubuntu-890-base kernel: [ 28.846103] IO window: 9000-9fffMay 24 22:51:33 ubuntu-890-base kernel: [ 28.846105] MEM window: fde00000-fdefffffMay 24 22:51:33 ubuntu-890-base kernel: [ 28.846107] PREFETCH window: fd000000-fd7fffffMay 24 22:51:33 ubuntu-890-base kernel: [ 28.846109] PCI: Bridge: 0000:00:0a.0May 24 22:51:33 ubuntu-890-base kernel: [ 28.846110] IO window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846112] MEM window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846113] PREFETCH window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846115] PCI: Bridge: 0000:00:0b.0May 24 22:51:33 ubuntu-890-base kernel: [ 28.846116] IO window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846117] MEM window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846119] PREFETCH window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846120] PCI: Bridge: 0000:00:0c.0May 24 22:51:33 ubuntu-890-base kernel: [ 28.846121] IO window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846123] MEM window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846124] PREFETCH window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846126] PCI: Bridge: 0000:00:0d.0May 24 22:51:33 ubuntu-890-base kernel: [ 28.846127] IO window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846128] MEM window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846130] PREFETCH window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846131] PCI: Bridge: 0000:00:0e.0May 24 22:51:33 ubuntu-890-base kernel: [ 28.846133] IO window: 7000-8fffMay 24 22:51:33 ubuntu-890-base kernel: [ 28.846135] MEM window: fdd00000-fddfffffMay 24 22:51:33 ubuntu-890-base kernel: [ 28.846136] PREFETCH window: disabled.May 24 22:51:33 ubuntu-890-base kernel: [ 28.846138] PCI: Bridge: 0000:00:0f.0May 24 22:51:33 ubuntu-890-base kernel: [ 28.846139] IO window: 6000-6fffMay 24 22:51:33 ubuntu-890-base kernel: [ 28.846141] MEM window: fa000000-fcffffffMay 24 22:51:33 ubuntu-890-base kernel: [ 28.846143] PREFETCH window: e0000000-efffffffMay 24 22:51:33 ubuntu-890-base kernel: [ 28.846151] PCI: Setting latency timer of device 0000:00:06.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 28.846161] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 28.846167] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 28.846172] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 28.846177] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 28.846182] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 28.846187] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 28.846197] NET: Registered protocol family 2May 24 22:51:33 ubuntu-890-base kernel: [ 28.855635] Time: acpi_pm clocksource has been installed.May 24 22:51:33 ubuntu-890-base kernel: [ 28.855653] Switched to high resolution mode on CPU 0May 24 22:51:33 ubuntu-890-base kernel: [ 28.856095] Switched to high resolution mode on CPU 1May 24 22:51:33 ubuntu-890-base kernel: [ 28.935711] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)May 24 22:51:33 ubuntu-890-base kernel: [ 28.935917] TCP established hash table entries: 16384 (order: 6, 262144 bytes)May 24 22:51:33 ubuntu-890-base kernel: [ 28.936110] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)May 24 22:51:33 ubuntu-890-base kernel: [ 28.936281] TCP: Hash tables configured (established 16384 bind 16384)May 24 22:51:33 ubuntu-890-base kernel: [ 28.936283] TCP reno registeredMay 24 22:51:33 ubuntu-890-base kernel: [ 28.965595] checking if image is initramfs... it isMay 24 22:51:33 ubuntu-890-base kernel: [ 29.516836] Freeing initrd memory: 7990k freedMay 24 22:51:33 ubuntu-890-base kernel: [ 29.523973] audit: initializing netlink socket (disabled)May 24 22:51:33 ubuntu-890-base kernel: [ 29.523987] audit(1243205469.620:1): initializedMay 24 22:51:33 ubuntu-890-base kernel: [ 29.524109] Total HugeTLB memory allocated, 0May 24 22:51:33 ubuntu-890-base kernel: [ 29.525751] VFS: Disk quotas dquot_6.5.1May 24 22:51:33 ubuntu-890-base kernel: [ 29.525821] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)May 24 22:51:33 ubuntu-890-base kernel: [ 29.525999] io scheduler noop registeredMay 24 22:51:33 ubuntu-890-base kernel: [ 29.526001] io scheduler anticipatory registeredMay 24 22:51:33 ubuntu-890-base kernel: [ 29.526003] io scheduler deadline registered (default)May 24 22:51:33 ubuntu-890-base kernel: [ 29.526090] io scheduler cfq registeredMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544828] pci 0000:00:05.0: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544844] pci 0000:00:05.1: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544857] pci 0000:00:05.2: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544868] pci 0000:00:06.0: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544882] pci 0000:00:06.1: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544896] pci 0000:00:08.0: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544910] pci 0000:00:09.0: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544923] pci 0000:00:0a.0: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544936] pci 0000:00:0b.0: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544948] pci 0000:00:0c.0: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544961] pci 0000:00:0d.0: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544973] pci 0000:00:0e.0: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.544986] pci 0000:00:0f.0: Enabling HT MSI MappingMay 24 22:51:33 ubuntu-890-base kernel: [ 29.545007] Boot video device is 0000:07:00.0May 24 22:51:33 ubuntu-890-base kernel: [ 29.545176] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 29.545194] assign_interrupt_mode Found MSI capabilityMay 24 22:51:33 ubuntu-890-base kernel: [ 29.545211] Allocate Port Service[0000:00:0a.0:pcie00]May 24 22:51:33 ubuntu-890-base kernel: [ 29.545266] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 29.545282] assign_interrupt_mode Found MSI capabilityMay 24 22:51:33 ubuntu-890-base kernel: [ 29.545293] Allocate Port Service[0000:00:0b.0:pcie00]May 24 22:51:33 ubuntu-890-base kernel: [ 29.545342] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 29.545358] assign_interrupt_mode Found MSI capabilityMay 24 22:51:33 ubuntu-890-base kernel: [ 29.545370] Allocate Port Service[0000:00:0c.0:pcie00]May 24 22:51:33 ubuntu-890-base kernel: [ 29.545419] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 29.545435] assign_interrupt_mode Found MSI capabilityMay 24 22:51:33 ubuntu-890-base kernel: [ 29.545446] Allocate Port Service[0000:00:0d.0:pcie00]May 24 22:51:33 ubuntu-890-base kernel: [ 29.545498] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 29.545514] assign_interrupt_mode Found MSI capabilityMay 24 22:51:33 ubuntu-890-base kernel: [ 29.545525] Allocate Port Service[0000:00:0e.0:pcie00]May 24 22:51:33 ubuntu-890-base kernel: [ 29.545571] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 29.545587] assign_interrupt_mode Found MSI capabilityMay 24 22:51:33 ubuntu-890-base kernel: [ 29.545598] Allocate Port Service[0000:00:0f.0:pcie00]May 24 22:51:33 ubuntu-890-base kernel: [ 29.569122] Real Time Clock Driver v1.12acMay 24 22:51:33 ubuntu-890-base kernel: [ 29.569228] Linux agpgart interface v0.102May 24 22:51:33 ubuntu-890-base kernel: [ 29.569231] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledMay 24 22:51:33 ubuntu-890-base kernel: [ 29.569372] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 24 22:51:33 ubuntu-890-base kernel: [ 29.569892] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 24 22:51:33 ubuntu-890-base kernel: [ 29.570560] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeMay 24 22:51:33 ubuntu-890-base kernel: [ 29.570623] input: Macintosh mouse button emulation as /devices/virtual/input/input0May 24 22:51:33 ubuntu-890-base kernel: [ 29.570704] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1May 24 22:51:33 ubuntu-890-base kernel: [ 29.570706] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnpMay 24 22:51:33 ubuntu-890-base kernel: [ 29.570804] serio: i8042 KBD port at 0x60,0x64 irq 1May 24 22:51:33 ubuntu-890-base kernel: [ 29.604755] mice: PS/2 mouse device common for all miceMay 24 22:51:33 ubuntu-890-base kernel: [ 29.604798] cpuidle: using governor ladderMay 24 22:51:33 ubuntu-890-base kernel: [ 29.604799] cpuidle: using governor menuMay 24 22:51:33 ubuntu-890-base kernel: [ 29.604950] NET: Registered protocol family 1May 24 22:51:33 ubuntu-890-base kernel: [ 29.605051] registered taskstats version 1May 24 22:51:33 ubuntu-890-base kernel: [ 29.605229] Magic number: 9:471:907May 24 22:51:33 ubuntu-890-base kernel: [ 29.605297] hash matches device ptyz3May 24 22:51:33 ubuntu-890-base kernel: [ 29.605367] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)May 24 22:51:33 ubuntu-890-base kernel: [ 29.605370] BIOS EDD facility v0.16 2004-Jun-25, 6 devices foundMay 24 22:51:33 ubuntu-890-base kernel: [ 29.605562] Freeing unused kernel memory: 328k freedMay 24 22:51:33 ubuntu-890-base kernel: [ 29.606019] Write protecting the kernel read-only data: 1044kMay 24 22:51:33 ubuntu-890-base kernel: [ 29.629352] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1May 24 22:51:33 ubuntu-890-base kernel: [ 30.791203] fuse init (API version 7.9)May 24 22:51:33 ubuntu-890-base kernel: [ 30.802837] ACPI: Fan [FAN] (on)May 24 22:51:33 ubuntu-890-base kernel: [ 30.808731] ACPI: Thermal Zone [THRM] (40 C)May 24 22:51:33 ubuntu-890-base kernel: [ 31.147190] usbcore: registered new interface driver usbfsMay 24 22:51:33 ubuntu-890-base kernel: [ 31.147212] usbcore: registered new interface driver hubMay 24 22:51:33 ubuntu-890-base kernel: [ 31.147642] SCSI subsystem initializedMay 24 22:51:33 ubuntu-890-base kernel: [ 31.152789] usbcore: registered new device driver usbMay 24 22:51:33 ubuntu-890-base kernel: [ 31.152933] libata version 3.00 loaded.May 24 22:51:33 ubuntu-890-base kernel: [ 31.154017] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverMay 24 22:51:33 ubuntu-890-base kernel: [ 31.154433] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23May 24 22:51:33 ubuntu-890-base kernel: [ 31.154443] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23May 24 22:51:33 ubuntu-890-base kernel: [ 31.154591] PCI: Setting latency timer of device 0000:00:02.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 31.154598] ohci_hcd 0000:00:02.0: OHCI Host ControllerMay 24 22:51:33 ubuntu-890-base kernel: [ 31.154869] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1May 24 22:51:33 ubuntu-890-base kernel: [ 31.154897] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000May 24 22:51:33 ubuntu-890-base kernel: [ 31.213949] usb usb1: configuration #1 chosen from 1 choiceMay 24 22:51:33 ubuntu-890-base kernel: [ 31.213978] hub 1-0:1.0: USB hub foundMay 24 22:51:33 ubuntu-890-base kernel: [ 31.213987] hub 1-0:1.0: 10 ports detectedMay 24 22:51:33 ubuntu-890-base kernel: [ 31.287323] Floppy drive(s): fd0 is 1.44MMay 24 22:51:33 ubuntu-890-base kernel: [ 31.305893] FDC 0 is a post-1991 82077May 24 22:51:33 ubuntu-890-base kernel: [ 31.322461] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22May 24 22:51:33 ubuntu-890-base kernel: [ 31.322473] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22May 24 22:51:33 ubuntu-890-base kernel: [ 31.322625] PCI: Setting latency timer of device 0000:00:02.1 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 31.322632] ehci_hcd 0000:00:02.1: EHCI Host ControllerMay 24 22:51:33 ubuntu-890-base kernel: [ 31.322700] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2May 24 22:51:33 ubuntu-890-base kernel: [ 31.322728] ehci_hcd 0000:00:02.1: debug port 1May 24 22:51:33 ubuntu-890-base kernel: [ 31.322731] PCI: cache line size of 64 is not supported by device 0000:00:02.1May 24 22:51:33 ubuntu-890-base kernel: [ 31.322742] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000May 24 22:51:33 ubuntu-890-base kernel: [ 31.341535] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004May 24 22:51:33 ubuntu-890-base kernel: [ 31.341652] usb usb2: configuration #1 chosen from 1 choiceMay 24 22:51:33 ubuntu-890-base kernel: [ 31.341675] hub 2-0:1.0: USB hub foundMay 24 22:51:33 ubuntu-890-base kernel: [ 31.341681] hub 2-0:1.0: 10 ports detectedMay 24 22:51:33 ubuntu-890-base kernel: [ 31.452118] PCI: Setting latency timer of device 0000:00:04.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 31.452525] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21May 24 22:51:33 ubuntu-890-base kernel: [ 31.452535] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21May 24 22:51:33 ubuntu-890-base kernel: [ 31.452549] PCI: Setting latency timer of device 0000:00:05.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 31.452555] ACPI: PCI interrupt for device 0000:00:05.0 disabledMay 24 22:51:33 ubuntu-890-base kernel: [ 31.452858] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20May 24 22:51:33 ubuntu-890-base kernel: [ 31.452864] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20May 24 22:51:33 ubuntu-890-base kernel: [ 31.452877] PCI: Setting latency timer of device 0000:00:05.1 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 31.452883] ACPI: PCI interrupt for device 0000:00:05.1 disabledMay 24 22:51:33 ubuntu-890-base kernel: [ 31.453183] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23May 24 22:51:33 ubuntu-890-base kernel: [ 31.453185] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 23 (level, low) -> IRQ 23May 24 22:51:33 ubuntu-890-base kernel: [ 31.453198] PCI: Setting latency timer of device 0000:00:05.2 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 31.453204] ACPI: PCI interrupt for device 0000:00:05.2 disabledMay 24 22:51:33 ubuntu-890-base kernel: [ 31.453226] PCI: Enabling device 0000:06:00.1 (0000 -> 0001)May 24 22:51:33 ubuntu-890-base kernel: [ 31.453517] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16May 24 22:51:33 ubuntu-890-base kernel: [ 31.453523] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 24 22:51:33 ubuntu-890-base kernel: [ 31.453541] PCI: Setting latency timer of device 0000:06:00.1 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 31.453550] ACPI: PCI interrupt for device 0000:06:00.1 disabledMay 24 22:51:33 ubuntu-890-base kernel: [ 31.454221] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17May 24 22:51:33 ubuntu-890-base kernel: [ 31.454229] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17May 24 22:51:33 ubuntu-890-base kernel: [ 31.454382] 3c59x: Donald Becker and others.May 24 22:51:33 ubuntu-890-base kernel: [ 31.454399] 0000:01:07.0: 3Com PCI 3c905C Tornado at ffffc20000174000.May 24 22:51:33 ubuntu-890-base kernel: [ 31.476529] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.May 24 22:51:33 ubuntu-890-base kernel: [ 31.476945] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22May 24 22:51:33 ubuntu-890-base kernel: [ 31.476949] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22May 24 22:51:33 ubuntu-890-base kernel: [ 31.476956] PCI: Setting latency timer of device 0000:00:08.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 32.003707] forcedeth 0000:00:08.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:f2:20May 24 22:51:33 ubuntu-890-base kernel: [ 32.003712] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 24 22:51:33 ubuntu-890-base kernel: [ 32.004131] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21May 24 22:51:33 ubuntu-890-base kernel: [ 32.004134] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AMC1] -> GSI 21 (level, low) -> IRQ 21May 24 22:51:33 ubuntu-890-base kernel: [ 32.004139] PCI: Setting latency timer of device 0000:00:09.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 32.180139] usb 2-4: new high speed USB device using ehci_hcd and address 3May 24 22:51:33 ubuntu-890-base kernel: [ 32.334009] usb 2-4: configuration #1 chosen from 1 choiceMay 24 22:51:33 ubuntu-890-base kernel: [ 32.532818] forcedeth 0000:00:09.0: ifname eth2, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:fd:c5May 24 22:51:33 ubuntu-890-base kernel: [ 32.532823] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 24 22:51:33 ubuntu-890-base kernel: [ 32.534678] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19May 24 22:51:33 ubuntu-890-base kernel: [ 32.534690] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19May 24 22:51:33 ubuntu-890-base kernel: [ 32.584758] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8]May 24 22:51:33 ubuntu-890-base kernel: [ 32.589535] pata_amd 0000:00:04.0: version 0.3.10May 24 22:51:33 ubuntu-890-base kernel: [ 32.589587] PCI: Setting latency timer of device 0000:00:04.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 32.589746] scsi0 : pata_amdMay 24 22:51:33 ubuntu-890-base kernel: [ 32.589809] scsi1 : pata_amdMay 24 22:51:33 ubuntu-890-base kernel: [ 32.590420] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14May 24 22:51:33 ubuntu-890-base kernel: [ 32.590422] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15May 24 22:51:33 ubuntu-890-base kernel: [ 32.702093] usb 1-3: new low speed USB device using ohci_hcd and address 2May 24 22:51:33 ubuntu-890-base kernel: [ 32.929390] usb 1-3: configuration #1 chosen from 1 choiceMay 24 22:51:33 ubuntu-890-base kernel: [ 32.951657] usbcore: registered new interface driver libusualMay 24 22:51:33 ubuntu-890-base kernel: [ 32.951779] usbcore: registered new interface driver hiddevMay 24 22:51:33 ubuntu-890-base kernel: [ 32.956338] hiddev96hidraw0: USB HID v1.00 Device [Lexmark 6500 Series] on usb-0000:00:02.1-4May 24 22:51:33 ubuntu-890-base kernel: [ 32.957097] Initializing USB Mass Storage driver...May 24 22:51:33 ubuntu-890-base kernel: [ 32.959395] scsi2 : SCSI emulation for USB Mass Storage devicesMay 24 22:51:33 ubuntu-890-base kernel: [ 32.961023] usb-storage: device found at 3May 24 22:51:33 ubuntu-890-base kernel: [ 32.961027] usb-storage: waiting for device to settle before scanningMay 24 22:51:33 ubuntu-890-base kernel: [ 32.962457] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.0/input/input2May 24 22:51:33 ubuntu-890-base kernel: [ 33.031609] input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3May 24 22:51:33 ubuntu-890-base kernel: [ 33.039157] hiddev97hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-3May 24 22:51:33 ubuntu-890-base kernel: [ 33.039170] usbcore: registered new interface driver usbhidMay 24 22:51:33 ubuntu-890-base kernel: [ 33.039173] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driverMay 24 22:51:33 ubuntu-890-base kernel: [ 33.039537] usbcore: registered new interface driver usb-storageMay 24 22:51:33 ubuntu-890-base kernel: [ 33.039540] USB Mass Storage support registered.May 24 22:51:33 ubuntu-890-base kernel: [ 33.128784] ata1.01: ATAPI: LITE-ON LTR-52327S, QS06, max UDMA/33May 24 22:51:33 ubuntu-890-base kernel: [ 33.318405] ata1.01: configured for UDMA/33May 24 22:51:33 ubuntu-890-base kernel: [ 33.318438] ata2: port disabled. ignoring.May 24 22:51:33 ubuntu-890-base kernel: [ 33.330933] scsi 0:0:1:0: CD-ROM LITE-ON LTR-52327S QS06 PQ: 0 ANSI: 5May 24 22:51:33 ubuntu-890-base kernel: [ 33.331208] sata_nv 0000:00:05.0: version 3.5May 24 22:51:33 ubuntu-890-base kernel: [ 33.331221] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21May 24 22:51:33 ubuntu-890-base kernel: [ 33.331448] PCI: Setting latency timer of device 0000:00:05.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 33.332974] scsi3 : sata_nvMay 24 22:51:33 ubuntu-890-base kernel: [ 33.333362] scsi4 : sata_nvMay 24 22:51:33 ubuntu-890-base kernel: [ 33.333550] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21May 24 22:51:33 ubuntu-890-base kernel: [ 33.333553] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21May 24 22:51:33 ubuntu-890-base kernel: [ 33.340426] Driver 'sr' needs updating - please use bus_type methodsMay 24 22:51:33 ubuntu-890-base kernel: [ 33.413862] sr0: scsi3-mmc drive: 186x/52x writer cd/rw xa/form2 cdda trayMay 24 22:51:33 ubuntu-890-base kernel: [ 33.413868] Uniform CD-ROM driver Revision: 3.20May 24 22:51:33 ubuntu-890-base kernel: [ 33.413923] sr 0:0:1:0: Attached scsi CD-ROM sr0May 24 22:51:33 ubuntu-890-base kernel: [ 33.418348] sr 0:0:1:0: Attached scsi generic sg0 type 5May 24 22:51:33 ubuntu-890-base kernel: [ 33.827395] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)May 24 22:51:33 ubuntu-890-base kernel: [ 33.871017] ata3.00: ATA-7: WDC WD2500JS-00SGB0, 20.06C03, max UDMA/133May 24 22:51:33 ubuntu-890-base kernel: [ 33.871022] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)May 24 22:51:33 ubuntu-890-base kernel: [ 33.888611] ata3.00: configured for UDMA/133May 24 22:51:33 ubuntu-890-base kernel: [ 33.907347] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7a6f6]May 24 22:51:33 ubuntu-890-base kernel: [ 34.216741] ata4: SATA link down (SStatus 0 SControl 300)May 24 22:51:33 ubuntu-890-base kernel: [ 34.227439] scsi 3:0:0:0: Direct-Access ATA WDC WD2500JS-00S 20.0 PQ: 0 ANSI: 5May 24 22:51:33 ubuntu-890-base kernel: [ 34.227518] scsi 3:0:0:0: Attached scsi generic sg1 type 0May 24 22:51:33 ubuntu-890-base kernel: [ 34.227564] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20May 24 22:51:33 ubuntu-890-base kernel: [ 34.227804] PCI: Setting latency timer of device 0000:00:05.1 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 34.228922] scsi5 : sata_nvMay 24 22:51:33 ubuntu-890-base kernel: [ 34.229333] scsi6 : sata_nvMay 24 22:51:33 ubuntu-890-base kernel: [ 34.229509] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20May 24 22:51:33 ubuntu-890-base kernel: [ 34.229511] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20May 24 22:51:33 ubuntu-890-base kernel: [ 34.556175] ata5: SATA link down (SStatus 0 SControl 300)May 24 22:51:33 ubuntu-890-base kernel: [ 34.895613] ata6: SATA link down (SStatus 0 SControl 300)May 24 22:51:33 ubuntu-890-base kernel: [ 34.906248] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 23 (level, low) -> IRQ 23May 24 22:51:33 ubuntu-890-base kernel: [ 34.906484] PCI: Setting latency timer of device 0000:00:05.2 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 34.906582] scsi7 : sata_nvMay 24 22:51:33 ubuntu-890-base kernel: [ 34.907126] scsi8 : sata_nvMay 24 22:51:33 ubuntu-890-base kernel: [ 34.907315] ata7: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 23May 24 22:51:33 ubuntu-890-base kernel: [ 34.907317] ata8: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 23May 24 22:51:33 ubuntu-890-base kernel: [ 35.235047] ata7: SATA link down (SStatus 0 SControl 300)May 24 22:51:33 ubuntu-890-base kernel: [ 35.574476] ata8: SATA link down (SStatus 0 SControl 300)May 24 22:51:33 ubuntu-890-base kernel: [ 35.585130] ahci 0000:06:00.0: version 3.0May 24 22:51:33 ubuntu-890-base kernel: [ 35.585555] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16May 24 22:51:33 ubuntu-890-base kernel: [ 35.585558] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16May 24 22:51:33 ubuntu-890-base kernel: [ 36.593129] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA modeMay 24 22:51:33 ubuntu-890-base kernel: [ 36.593134] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part May 24 22:51:33 ubuntu-890-base kernel: [ 36.593139] PCI: Setting latency timer of device 0000:06:00.0 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 36.593316] scsi9 : ahciMay 24 22:51:33 ubuntu-890-base kernel: [ 36.593847] scsi10 : ahciMay 24 22:51:33 ubuntu-890-base kernel: [ 36.593874] ata9: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16May 24 22:51:33 ubuntu-890-base kernel: [ 36.593877] ata10: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16May 24 22:51:33 ubuntu-890-base kernel: [ 36.952193] ata9: SATA link down (SStatus 0 SControl 300)May 24 22:51:33 ubuntu-890-base kernel: [ 37.291625] ata10: SATA link down (SStatus 0 SControl 300)May 24 22:51:33 ubuntu-890-base kernel: [ 37.291712] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 24 22:51:33 ubuntu-890-base kernel: [ 37.291761] PCI: Setting latency timer of device 0000:06:00.1 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 37.291824] scsi11 : pata_jmicronMay 24 22:51:33 ubuntu-890-base kernel: [ 37.292446] scsi12 : pata_jmicronMay 24 22:51:33 ubuntu-890-base kernel: [ 37.292474] ata11: PATA max UDMA/100 cmd 0x8c00 ctl 0x8800 bmdma 0x7c00 irq 16May 24 22:51:33 ubuntu-890-base kernel: [ 37.292476] ata12: PATA max UDMA/100 cmd 0x8400 ctl 0x8000 bmdma 0x7c08 irq 16May 24 22:51:33 ubuntu-890-base kernel: [ 37.631039] Driver 'sd' needs updating - please use bus_type methodsMay 24 22:51:33 ubuntu-890-base kernel: [ 37.631143] sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 24 22:51:33 ubuntu-890-base kernel: [ 37.631154] sd 3:0:0:0: [sda] Write Protect is offMay 24 22:51:33 ubuntu-890-base kernel: [ 37.631156] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00May 24 22:51:33 ubuntu-890-base kernel: [ 37.631169] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 24 22:51:33 ubuntu-890-base kernel: [ 37.631227] sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 24 22:51:33 ubuntu-890-base kernel: [ 37.631234] sd 3:0:0:0: [sda] Write Protect is offMay 24 22:51:33 ubuntu-890-base kernel: [ 37.631235] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00May 24 22:51:33 ubuntu-890-base kernel: [ 37.631247] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 24 22:51:33 ubuntu-890-base kernel: [ 37.631250] sda: sda1 sda2 < sda5 sda6 >May 24 22:51:33 ubuntu-890-base kernel: [ 37.666597] sd 3:0:0:0: [sda] Attached SCSI diskMay 24 22:51:33 ubuntu-890-base kernel: [ 37.951074] usb-storage: device scan completeMay 24 22:51:33 ubuntu-890-base kernel: [ 37.952601] scsi 2:0:0:0: Direct-Access Lexmark USB Mass Storage 200 PQ: 0 ANSI: 0May 24 22:51:33 ubuntu-890-base kernel: [ 37.959143] sd 2:0:0:0: [sdb] Attached SCSI removable diskMay 24 22:51:33 ubuntu-890-base kernel: [ 37.959182] sd 2:0:0:0: Attached scsi generic sg2 type 0May 24 22:51:33 ubuntu-890-base kernel: [ 38.065165] Attempting manual resumeMay 24 22:51:33 ubuntu-890-base kernel: [ 38.065169] swsusp: Resume From Partition 8:6May 24 22:51:33 ubuntu-890-base kernel: [ 38.065171] PM: Checking swsusp image.May 24 22:51:33 ubuntu-890-base kernel: [ 38.065348] PM: Resume from disk failed.May 24 22:51:33 ubuntu-890-base kernel: [ 38.099203] kjournald starting. Commit interval 5 secondsMay 24 22:51:33 ubuntu-890-base kernel: [ 38.099532] EXT3-fs: mounted filesystem with ordered data mode.May 24 22:51:33 ubuntu-890-base kernel: [ 43.694750] pci_hotplug: PCI Hot Plug PCI Core version: 0.5May 24 22:51:33 ubuntu-890-base kernel: [ 43.698757] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4May 24 22:51:33 ubuntu-890-base kernel: [ 43.985424] input: PC Speaker as /devices/platform/pcspkr/input/input3May 24 22:51:33 ubuntu-890-base kernel: [ 44.081094] parport_pc 00:09: reported by Plug and Play ACPIMay 24 22:51:33 ubuntu-890-base kernel: [ 44.081160] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]May 24 22:51:33 ubuntu-890-base kernel: [ 44.145107] input: Power Button (FF) as /devices/virtual/input/input4May 24 22:51:33 ubuntu-890-base kernel: [ 44.204096] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00May 24 22:51:33 ubuntu-890-base kernel: [ 44.204123] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40May 24 22:51:33 ubuntu-890-base kernel: [ 44.479837] ACPI: Power Button (FF) [PWRF]May 24 22:51:33 ubuntu-890-base kernel: [ 44.479898] input: Power Button (CM) as /devices/virtual/input/input5May 24 22:51:33 ubuntu-890-base kernel: [ 44.529516] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20May 24 22:51:33 ubuntu-890-base kernel: [ 44.529521] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20May 24 22:51:33 ubuntu-890-base kernel: [ 44.529740] PCI: Setting latency timer of device 0000:00:06.1 to 64May 24 22:51:33 ubuntu-890-base kernel: [ 44.629558] ACPI: Power Button (CM) [PWRB]May 24 22:51:33 ubuntu-890-base kernel: [ 44.770979] udev: renamed network interface eth2 to eth1May 24 22:51:33 ubuntu-890-base kernel: [ 44.929570] udev: renamed network interface eth0 to eth2May 24 22:51:33 ubuntu-890-base kernel: [ 44.970171] udev: renamed network interface eth1_rename to eth0May 24 22:51:33 ubuntu-890-base kernel: [ 45.002319] eth0: no link during initialization.May 24 22:51:33 ubuntu-890-base kernel: [ 45.120899] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x043D pid 0x010FMay 24 22:51:33 ubuntu-890-base kernel: [ 45.120923] usbcore: registered new interface driver usblpMay 24 22:51:33 ubuntu-890-base kernel: [ 46.238210] NET: Registered protocol family 17May 24 22:51:33 ubuntu-890-base kernel: [ 48.765891] loop: module loadedMay 24 22:51:33 ubuntu-890-base kernel: [ 48.778380] lp0: using parport0 (interrupt-driven).May 24 22:51:33 ubuntu-890-base kernel: [ 48.949534] Adding 1494004k swap on /dev/sda6. Priority:-1 extents:1 across:1494004kMay 24 22:51:33 ubuntu-890-base kernel: [ 49.511452] EXT3 FS on sda5, internal journalMay 24 22:51:33 ubuntu-890-base kernel: [ 49.654967] device-mapper: uevent: version 1.0.3May 24 22:51:33 ubuntu-890-base kernel: [ 49.655000] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.comMay 24 22:51:33 ubuntu-890-base kernel: [ 51.012363] ip_tables: (C) 2000-2006 Netfilter Core TeamMay 24 22:51:33 ubuntu-890-base kernel: [ 53.302936] No dock devices found.May 24 22:51:35 ubuntu-890-base kernel: [ 55.548930] audit(1243219895.858:2): type=1503 operation="capable" name="sys_resource" pid=5552 profile="/usr/sbin/named" namespace="default"May 24 22:51:35 ubuntu-890-base kernel: [ 55.596631] NET: Registered protocol family 10May 24 22:51:35 ubuntu-890-base kernel: [ 55.596875] lo: Disabled Privacy ExtensionsMay 24 22:51:35 ubuntu-890-base kernel: [ 55.597472] ADDRCONF(NETDEV_UP): eth0: link is not readyMay 24 22:51:47 ubuntu-890-base kernel: [ 67.566189] ppdev: user-space parallel port driverMay 24 22:51:47 ubuntu-890-base kernel: [ 67.645290] audit(1243219907.976:3): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=6019 profile="/usr/sbin/cupsd" namespace="default"May 24 22:51:50 ubuntu-890-base kernel: [ 70.080358] device eth0 entered promiscuous modeMay 24 22:51:50 ubuntu-890-base kernel: [ 70.080368] audit(1243219910.418:4): dev=eth0 prom=256 old_prom=0 auid=4294967295May 24 22:51:50 ubuntu-890-base kernel: [ 70.110291] device eth0 left promiscuous modeMay 24 22:51:50 ubuntu-890-base kernel: [ 70.110296] audit(1243219910.448:5): dev=eth0 prom=0 old_prom=256 auid=4294967295May 24 22:51:50 ubuntu-890-base kernel: [ 70.140252] device eth0 entered promiscuous modeMay 24 22:51:50 ubuntu-890-base kernel: [ 70.140265] audit(1243219910.478:6): dev=eth0 prom=256 old_prom=0 auid=4294967295May 24 22:51:52 ubuntu-890-base kernel: [ 71.852389] eth1: no link during initialization.May 24 22:51:52 ubuntu-890-base kernel: [ 71.852830] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 24 22:51:52 ubuntu-890-base kernel: [ 71.886469] eth2: setting full-duplex.May 24 22:51:52 ubuntu-890-base kernel: [ 71.949629] Bluetooth: Core ver 2.11May 24 22:51:52 ubuntu-890-base kernel: [ 71.951264] NET: Registered protocol family 31May 24 22:51:52 ubuntu-890-base kernel: [ 71.951272] Bluetooth: HCI device and connection manager initializedMay 24 22:51:52 ubuntu-890-base kernel: [ 71.951278] Bluetooth: HCI socket layer initializedMay 24 22:51:52 ubuntu-890-base kernel: [ 71.985803] Bluetooth: L2CAP ver 2.9May 24 22:51:52 ubuntu-890-base kernel: [ 71.985811] Bluetooth: L2CAP socket layer initializedMay 24 22:51:52 ubuntu-890-base kernel: [ 71.996467] Bluetooth: RFCOMM socket layer initializedMay 24 22:51:52 ubuntu-890-base kernel: [ 71.996490] Bluetooth: RFCOMM TTY layer initializedMay 24 22:51:52 ubuntu-890-base kernel: [ 71.996492] Bluetooth: RFCOMM ver 1.8May 24 22:52:07 ubuntu-890-base kernel: [ 87.219936] eth2: no IPv6 routers presentMay 24 22:52:19 ubuntu-890-base kernel: [ 99.023078] device eth0 left promiscuous modeMay 24 22:52:19 ubuntu-890-base kernel: [ 99.023091] audit(1243219939.406:7): dev=eth0 prom=0 old_prom=256 auid=4294967295May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpusetMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Initializing cgroup subsys cpuMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Linux version 2.6.24-24-server (buildd@yellow) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)) #1 SMP Wed Apr 15 15:41:09 UTC 2009 (Ubuntu 2.6.24-24.53-server)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro quiet splashMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] BIOS-provided physical RAM map:May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee0000 - 000000001fee3000 (ACPI NVS)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fee3000 - 000000001fef0000 (ACPI data)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 000000001fef0000 - 000000001ff00000 (reserved)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] end_pfn_map = 1048576May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] DMI 2.3 present.May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7D60 checksum 0May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDP 000F7D60, 0014 (r0 Nvidia)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: RSDT 1FEE3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: FACP 1FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: DSDT 1FEE3180, 906B (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: FACS 1FEE0000, 0040May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: MCFG 1FEEC300, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: APIC 1FEEC240, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] CPU has 2 num_coresMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] No NUMA configuration foundMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Faking a node at 0000000000000000-000000001fee0000May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 usedMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Entering add_active_range(0, 256, 130784) 1 entries of 3200 usedMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-000000001fee0000May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Zone PFN ranges:May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] DMA 0 -> 4096May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] DMA32 4096 -> 1048576May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Normal 1048576 -> 1048576May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Movable zone start PFN for each nodeMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] early_node_map[2] active PFN rangesMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] 0: 0 -> 159May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] 0: 256 -> 130784May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] On node 0 totalpages: 130687May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] DMA zone: 56 pages used for memmapMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] DMA zone: 1322 pages reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] DMA zone: 2621 pages, LIFO batch:0May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 1732 pages used for memmapMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] DMA32 zone: 124956 pages, LIFO batch:31May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Normal zone: 0 pages used for memmapMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Movable zone: 0 pages used for memmapMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_overrideMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Processor #0 (Bootup-CPU)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Processor #1May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ9 used by override.May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ14 used by override.May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] ACPI: IRQ15 used by override.May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Setting APIC routing to flatMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:d0100000)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUsMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] PERCPU: Allocating 41952 bytes of per cpu dataMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 127577May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Policy zone: DMA32May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Kernel command line: root=UUID=006d7614-7661-4516-b532-e53d18f801a8 ro quiet splashMay 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] Initializing CPU#0May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)May 24 23:41:57 ubuntu-890-base kernel: [ 0.000000] TSC calibrated against PM_TIMERMay 24 23:41:57 ubuntu-890-base kernel: [ 27.203886] Marking TSC unstable due to TSCs unsynchronizedMay 24 23:41:57 ubuntu-890-base kernel: [ 27.203888] time.c: Detected 2411.108 MHz processor.May 24 23:41:57 ubuntu-890-base kernel: [ 27.205265] Console: colour VGA+ 80x25May 24 23:41:57 ubuntu-890-base kernel: [ 27.205268] console [tty0] enabledMay 24 23:41:57 ubuntu-890-base kernel: [ 27.205283] Checking aperture...May 24 23:41:57 ubuntu-890-base kernel: [ 27.205285] CPU 0: aperture @ a332000000 size 32 MBMay 24 23:41:57 ubuntu-890-base kernel: [ 27.205287] Aperture too small (32 MB)May 24 23:41:57 ubuntu-890-base kernel: [ 27.209948] No AGP bridge foundMay 24 23:41:57 ubuntu-890-base kernel: [ 27.215367] Memory: 502148k/523136k available (2527k kernel code, 20600k reserved, 1329k data, 328k init)May 24 23:41:57 ubuntu-890-base kernel: [ 27.215406] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1May 24 23:41:57 ubuntu-890-base kernel: [ 27.363609] Calibrating delay using timer specific routine.. 4825.27 BogoMIPS (lpj=24126396)May 24 23:41:57 ubuntu-890-base kernel: [ 27.363642] Security Framework initializedMay 24 23:41:57 ubuntu-890-base kernel: [ 27.363649] SELinux: Disabled at boot.May 24 23:41:57 ubuntu-890-base kernel: [ 27.363662] AppArmor: AppArmor initializedMay 24 23:41:57 ubuntu-890-base kernel: [ 27.363666] Failure registering capabilities with primary security module.May 24 23:41:57 ubuntu-890-base kernel: [ 27.363713] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)May 24 23:41:57 ubuntu-890-base kernel: [ 27.364086] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)May 24 23:41:57 ubuntu-890-base kernel: [ 27.364284] Mount-cache hash table entries: 256May 24 23:41:57 ubuntu-890-base kernel: [ 27.364431] Initializing cgroup subsys nsMay 24 23:41:57 ubuntu-890-base kernel: [ 27.364435] Initializing cgroup subsys cpuacctMay 24 23:41:57 ubuntu-890-base kernel: [ 27.364448] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 24 23:41:57 ubuntu-890-base kernel: [ 27.364449] CPU: L2 Cache: 512K (64 bytes/line)May 24 23:41:57 ubuntu-890-base kernel: [ 27.364451] CPU 0/0 -> Node 0May 24 23:41:57 ubuntu-890-base kernel: [ 27.364453] CPU: Physical Processor ID: 0May 24 23:41:57 ubuntu-890-base kernel: [ 27.364454] CPU: Processor Core ID: 0May 24 23:41:57 ubuntu-890-base kernel: [ 27.364478] SMP alternatives: switching to UP codeMay 24 23:41:57 ubuntu-890-base kernel: [ 27.365089] Early unpacking initramfs... doneMay 24 23:41:57 ubuntu-890-base kernel: [ 27.683252] ACPI: Core revision 20070126May 24 23:41:57 ubuntu-890-base kernel: [ 27.683329] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.May 24 23:41:57 ubuntu-890-base kernel: [ 27.790187] Using local APIC timer interrupts.May 24 23:41:57 ubuntu-890-base kernel: [ 27.831599] APIC timer calibration result 12557844May 24 23:41:57 ubuntu-890-base kernel: [ 27.831600] Detected 12.557 MHz APIC timer.May 24 23:41:57 ubuntu-890-base kernel: [ 27.831712] SMP alternatives: switching to SMP codeMay 24 23:41:57 ubuntu-890-base kernel: [ 27.832235] Booting processor 1/2 APIC 0x1May 24 23:41:57 ubuntu-890-base kernel: [ 27.843468] Initializing CPU#1May 24 23:41:57 ubuntu-890-base kernel: [ 27.992539] Calibrating delay using timer specific routine.. 4822.26 BogoMIPS (lpj=24111313)May 24 23:41:57 ubuntu-890-base kernel: [ 27.992545] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)May 24 23:41:57 ubuntu-890-base kernel: [ 27.992546] CPU: L2 Cache: 512K (64 bytes/line)May 24 23:41:57 ubuntu-890-base kernel: [ 27.992548] CPU 1/1 -> Node 0May 24 23:41:57 ubuntu-890-base kernel: [ 27.992550] CPU: Physical Processor ID: 0May 24 23:41:57 ubuntu-890-base kernel: [ 27.992551] CPU: Processor Core ID: 1May 24 23:41:57 ubuntu-890-base kernel: [ 27.992625] AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02May 24 23:41:57 ubuntu-890-base kernel: [ 27.991520] Brought up 2 CPUsMay 24 23:41:57 ubuntu-890-base kernel: [ 27.991625] CPU0 attaching sched-domain:May 24 23:41:57 ubuntu-890-base kernel: [ 27.991628] domain 0: span 00000000,00000003May 24 23:41:57 ubuntu-890-base kernel: [ 27.991630] groups: 00000000,00000001 00000000,00000002May 24 23:41:57 ubuntu-890-base kernel: [ 27.991633] domain 1: span 00000000,00000003May 24 23:41:57 ubuntu-890-base kernel: [ 27.991634] groups: 00000000,00000003May 24 23:41:57 ubuntu-890-base kernel: [ 27.991636] CPU1 attaching sched-domain:May 24 23:41:57 ubuntu-890-base kernel: [ 27.991637] domain 0: span 00000000,00000003May 24 23:41:57 ubuntu-890-base kernel: [ 27.991639] groups: 00000000,00000002 00000000,00000001May 24 23:41:57 ubuntu-890-base kernel: [ 27.991641] domain 1: span 00000000,00000003May 24 23:41:57 ubuntu-890-base kernel: [ 27.991643] groups: 00000000,00000003May 24 23:41:57 ubuntu-890-base kernel: [ 27.991964] net_namespace: 120 bytesMay 24 23:41:57 ubuntu-890-base kernel: [ 27.992337] Time: 23:41:31 Date: 05/24/09May 24 23:41:57 ubuntu-890-base kernel: [ 27.992372] NET: Registered protocol family 16May 24 23:41:57 ubuntu-890-base kernel: [ 27.992559] ACPI: bus type pci registeredMay 24 23:41:57 ubuntu-890-base kernel: [ 27.992647] PCI: Using configuration type 1May 24 23:41:57 ubuntu-890-base kernel: [ 27.994195] ACPI: EC: Look up EC in DSDTMay 24 23:41:57 ubuntu-890-base kernel: [ 28.001389] ACPI: Interpreter enabledMay 24 23:41:57 ubuntu-890-base kernel: [ 28.001391] ACPI: (supports S0 S1 S3 S4 S5)May 24 23:41:57 ubuntu-890-base kernel: [ 28.001406] ACPI: Using IOAPIC for interrupt routingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.011672] ACPI: PCI Root Bridge [PCI0] (0000:00)May 24 23:41:57 ubuntu-890-base kernel: [ 28.012335] PCI: Transparent bridge - 0000:00:06.0May 24 23:41:57 ubuntu-890-base kernel: [ 28.012763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]May 24 23:41:57 ubuntu-890-base kernel: [ 28.013098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]May 24 23:41:57 ubuntu-890-base kernel: [ 28.102516] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.102702] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.102884] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.103065] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.103245] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.103427] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.103609] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.103789] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.103970] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.104154] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.104336] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.104517] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.104703] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.104884] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.105066] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.105248] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.105428] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.105610] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.105792] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.105974] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)May 24 23:41:57 ubuntu-890-base kernel: [ 28.106190] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.106397] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.106604] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.106811] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.107017] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.107224] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.107430] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.107637] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.107845] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.108054] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.108262] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.108469] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.108678] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.108886] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.109094] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.109317] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.109526] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.109733] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.109941] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.110149] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0May 24 23:41:57 ubuntu-890-base kernel: [ 28.110286] Linux Plug and Play Support v0.97 (c) Adam BelayMay 24 23:41:57 ubuntu-890-base kernel: [ 28.110315] pnp: PnP ACPI initMay 24 23:41:57 ubuntu-890-base kernel: [ 28.110324] ACPI: bus type pnp registeredMay 24 23:41:57 ubuntu-890-base kernel: [ 28.115649] pnpacpi: exceeded the max number of mem resources: 12May 24 23:41:57 ubuntu-890-base kernel: [ 28.115761] pnp: PnP ACPI: found 13 devicesMay 24 23:41:57 ubuntu-890-base kernel: [ 28.115763] ACPI: ACPI bus type pnp unregisteredMay 24 23:41:57 ubuntu-890-base kernel: [ 28.115983] PCI: Using ACPI for IRQ routingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.115987] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportMay 24 23:41:57 ubuntu-890-base kernel: [ 28.141170] NET: Registered protocol family 8May 24 23:41:57 ubuntu-890-base kernel: [ 28.141172] NET: Registered protocol family 20May 24 23:41:57 ubuntu-890-base kernel: [ 28.141195] NetLabel: InitializingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.141197] NetLabel: domain hash size = 128May 24 23:41:57 ubuntu-890-base kernel: [ 28.141198] NetLabel: protocols = UNLABELED CIPSOv4May 24 23:41:57 ubuntu-890-base kernel: [ 28.141210] NetLabel: unlabeled traffic allowed by defaultMay 24 23:41:57 ubuntu-890-base kernel: [ 28.141311] AppArmor: AppArmor Filesystem EnabledMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171088] system 00:01: ioport range 0x1000-0x107f has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171091] system 00:01: ioport range 0x1080-0x10ff has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171093] system 00:01: ioport range 0x1400-0x147f has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171095] system 00:01: ioport range 0x1480-0x14ff has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171097] system 00:01: ioport range 0x1800-0x187f has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171099] system 00:01: ioport range 0x1880-0x18ff has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171105] system 00:02: ioport range 0x4d0-0x4d1 has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171107] system 00:02: ioport range 0x800-0x87f has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171109] system 00:02: ioport range 0x290-0x297 has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171120] system 00:0b: iomem range 0x0-0x0 could not be reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171125] system 00:0c: iomem range 0xd5800-0xd7fff has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171127] system 00:0c: iomem range 0xf0000-0xf7fff could not be reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171130] system 00:0c: iomem range 0xf8000-0xfbfff could not be reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171132] system 00:0c: iomem range 0xfc000-0xfffff could not be reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171134] system 00:0c: iomem range 0x1fee0000-0x1fefffff could not be reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171136] system 00:0c: iomem range 0xffff0000-0xffffffff has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171141] system 00:0c: iomem range 0x0-0x9ffff could not be reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171143] system 00:0c: iomem range 0x100000-0x1fedffff could not be reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171145] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171147] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171149] system 00:0c: iomem range 0xfefff000-0xfeffffff has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171151] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reservedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171504] PCI: Bridge: 0000:00:06.0May 24 23:41:57 ubuntu-890-base kernel: [ 28.171506] IO window: 9000-9fffMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171508] MEM window: fde00000-fdefffffMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171510] PREFETCH window: fd000000-fd7fffffMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171512] PCI: Bridge: 0000:00:0a.0May 24 23:41:57 ubuntu-890-base kernel: [ 28.171513] IO window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171515] MEM window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171516] PREFETCH window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171518] PCI: Bridge: 0000:00:0b.0May 24 23:41:57 ubuntu-890-base kernel: [ 28.171519] IO window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171520] MEM window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171522] PREFETCH window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171523] PCI: Bridge: 0000:00:0c.0May 24 23:41:57 ubuntu-890-base kernel: [ 28.171524] IO window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171526] MEM window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171527] PREFETCH window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171529] PCI: Bridge: 0000:00:0d.0May 24 23:41:57 ubuntu-890-base kernel: [ 28.171530] IO window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171531] MEM window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171533] PREFETCH window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171534] PCI: Bridge: 0000:00:0e.0May 24 23:41:57 ubuntu-890-base kernel: [ 28.171536] IO window: 7000-8fffMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171538] MEM window: fdd00000-fddfffffMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171539] PREFETCH window: disabled.May 24 23:41:57 ubuntu-890-base kernel: [ 28.171541] PCI: Bridge: 0000:00:0f.0May 24 23:41:57 ubuntu-890-base kernel: [ 28.171542] IO window: 6000-6fffMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171544] MEM window: fa000000-fcffffffMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171546] PREFETCH window: e0000000-efffffffMay 24 23:41:57 ubuntu-890-base kernel: [ 28.171554] PCI: Setting latency timer of device 0000:00:06.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.171564] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.171569] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.171574] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.171580] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.171585] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.171590] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.171600] NET: Registered protocol family 2May 24 23:41:57 ubuntu-890-base kernel: [ 28.181041] Time: acpi_pm clocksource has been installed.May 24 23:41:57 ubuntu-890-base kernel: [ 28.181057] Switched to high resolution mode on CPU 0May 24 23:41:57 ubuntu-890-base kernel: [ 28.182357] Switched to high resolution mode on CPU 1May 24 23:41:57 ubuntu-890-base kernel: [ 28.261119] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)May 24 23:41:57 ubuntu-890-base kernel: [ 28.261325] TCP established hash table entries: 16384 (order: 6, 262144 bytes)May 24 23:41:57 ubuntu-890-base kernel: [ 28.261519] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)May 24 23:41:57 ubuntu-890-base kernel: [ 28.261690] TCP: Hash tables configured (established 16384 bind 16384)May 24 23:41:57 ubuntu-890-base kernel: [ 28.261692] TCP reno registeredMay 24 23:41:57 ubuntu-890-base kernel: [ 28.291000] checking if image is initramfs... it isMay 24 23:41:57 ubuntu-890-base kernel: [ 28.842209] Freeing initrd memory: 7990k freedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.849352] audit: initializing netlink socket (disabled)May 24 23:41:57 ubuntu-890-base kernel: [ 28.849365] audit(1243208491.620:1): initializedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.849489] Total HugeTLB memory allocated, 0May 24 23:41:57 ubuntu-890-base kernel: [ 28.851127] VFS: Disk quotas dquot_6.5.1May 24 23:41:57 ubuntu-890-base kernel: [ 28.851196] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)May 24 23:41:57 ubuntu-890-base kernel: [ 28.851379] io scheduler noop registeredMay 24 23:41:57 ubuntu-890-base kernel: [ 28.851381] io scheduler anticipatory registeredMay 24 23:41:57 ubuntu-890-base kernel: [ 28.851383] io scheduler deadline registered (default)May 24 23:41:57 ubuntu-890-base kernel: [ 28.851474] io scheduler cfq registeredMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870234] pci 0000:00:05.0: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870250] pci 0000:00:05.1: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870263] pci 0000:00:05.2: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870274] pci 0000:00:06.0: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870287] pci 0000:00:06.1: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870302] pci 0000:00:08.0: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870316] pci 0000:00:09.0: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870328] pci 0000:00:0a.0: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870341] pci 0000:00:0b.0: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870354] pci 0000:00:0c.0: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870366] pci 0000:00:0d.0: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870379] pci 0000:00:0e.0: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870392] pci 0000:00:0f.0: Enabling HT MSI MappingMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870413] Boot video device is 0000:07:00.0May 24 23:41:57 ubuntu-890-base kernel: [ 28.870580] PCI: Setting latency timer of device 0000:00:0a.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.870597] assign_interrupt_mode Found MSI capabilityMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870614] Allocate Port Service[0000:00:0a.0:pcie00]May 24 23:41:57 ubuntu-890-base kernel: [ 28.870669] PCI: Setting latency timer of device 0000:00:0b.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.870685] assign_interrupt_mode Found MSI capabilityMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870697] Allocate Port Service[0000:00:0b.0:pcie00]May 24 23:41:57 ubuntu-890-base kernel: [ 28.870746] PCI: Setting latency timer of device 0000:00:0c.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.870762] assign_interrupt_mode Found MSI capabilityMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870774] Allocate Port Service[0000:00:0c.0:pcie00]May 24 23:41:57 ubuntu-890-base kernel: [ 28.870822] PCI: Setting latency timer of device 0000:00:0d.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.870838] assign_interrupt_mode Found MSI capabilityMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870850] Allocate Port Service[0000:00:0d.0:pcie00]May 24 23:41:57 ubuntu-890-base kernel: [ 28.870908] PCI: Setting latency timer of device 0000:00:0e.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.870924] assign_interrupt_mode Found MSI capabilityMay 24 23:41:57 ubuntu-890-base kernel: [ 28.870936] Allocate Port Service[0000:00:0e.0:pcie00]May 24 23:41:57 ubuntu-890-base kernel: [ 28.870983] PCI: Setting latency timer of device 0000:00:0f.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 28.870999] assign_interrupt_mode Found MSI capabilityMay 24 23:41:57 ubuntu-890-base kernel: [ 28.871011] Allocate Port Service[0000:00:0f.0:pcie00]May 24 23:41:57 ubuntu-890-base kernel: [ 28.894186] Real Time Clock Driver v1.12acMay 24 23:41:57 ubuntu-890-base kernel: [ 28.894289] Linux agpgart interface v0.102May 24 23:41:57 ubuntu-890-base kernel: [ 28.894292] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledMay 24 23:41:57 ubuntu-890-base kernel: [ 28.894432] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 24 23:41:57 ubuntu-890-base kernel: [ 28.894942] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AMay 24 23:41:57 ubuntu-890-base kernel: [ 28.895608] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeMay 24 23:41:57 ubuntu-890-base kernel: [ 28.895671] input: Macintosh mouse button emulation as /devices/virtual/input/input0May 24 23:41:57 ubuntu-890-base kernel: [ 28.895753] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1May 24 23:41:57 ubuntu-890-base kernel: [ 28.895755] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnpMay 24 23:41:57 ubuntu-890-base kernel: [ 28.895853] serio: i8042 KBD port at 0x60,0x64 irq 1May 24 23:41:57 ubuntu-890-base kernel: [ 28.930154] mice: PS/2 mouse device common for all miceMay 24 23:41:57 ubuntu-890-base kernel: [ 28.930195] cpuidle: using governor ladderMay 24 23:41:57 ubuntu-890-base kernel: [ 28.930197] cpuidle: using governor menuMay 24 23:41:57 ubuntu-890-base kernel: [ 28.930343] NET: Registered protocol family 1May 24 23:41:57 ubuntu-890-base kernel: [ 28.930444] registered taskstats version 1May 24 23:41:57 ubuntu-890-base kernel: [ 28.930621] Magic number: 9:371:707May 24 23:41:57 ubuntu-890-base kernel: [ 28.930761] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)May 24 23:41:57 ubuntu-890-base kernel: [ 28.930763] BIOS EDD facility v0.16 2004-Jun-25, 6 devices foundMay 24 23:41:57 ubuntu-890-base kernel: [ 28.930957] Freeing unused kernel memory: 328k freedMay 24 23:41:57 ubuntu-890-base kernel: [ 28.931424] Write protecting the kernel read-only data: 1044kMay 24 23:41:57 ubuntu-890-base kernel: [ 28.955943] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1May 24 23:41:57 ubuntu-890-base kernel: [ 30.117052] fuse init (API version 7.9)May 24 23:41:57 ubuntu-890-base kernel: [ 30.129784] ACPI: Fan [FAN] (on)May 24 23:41:57 ubuntu-890-base kernel: [ 30.135930] ACPI: Thermal Zone [THRM] (40 C)May 24 23:41:57 ubuntu-890-base kernel: [ 30.469865] usbcore: registered new interface driver usbfsMay 24 23:41:57 ubuntu-890-base kernel: [ 30.469892] usbcore: registered new interface driver hubMay 24 23:41:57 ubuntu-890-base kernel: [ 30.470873] SCSI subsystem initializedMay 24 23:41:57 ubuntu-890-base kernel: [ 30.480821] usbcore: registered new device driver usbMay 24 23:41:57 ubuntu-890-base kernel: [ 30.493924] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverMay 24 23:41:57 ubuntu-890-base kernel: [ 30.494355] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23May 24 23:41:57 ubuntu-890-base kernel: [ 30.494366] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23May 24 23:41:57 ubuntu-890-base kernel: [ 30.494529] PCI: Setting latency timer of device 0000:00:02.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 30.494536] ohci_hcd 0000:00:02.0: OHCI Host ControllerMay 24 23:41:57 ubuntu-890-base kernel: [ 30.494792] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1May 24 23:41:57 ubuntu-890-base kernel: [ 30.494813] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000May 24 23:41:57 ubuntu-890-base kernel: [ 30.497424] libata version 3.00 loaded.May 24 23:41:57 ubuntu-890-base kernel: [ 30.552964] usb usb1: configuration #1 chosen from 1 choiceMay 24 23:41:57 ubuntu-890-base kernel: [ 30.552988] hub 1-0:1.0: USB hub foundMay 24 23:41:57 ubuntu-890-base kernel: [ 30.552997] hub 1-0:1.0: 10 ports detectedMay 24 23:41:57 ubuntu-890-base kernel: [ 30.613357] Floppy drive(s): fd0 is 1.44MMay 24 23:41:57 ubuntu-890-base kernel: [ 30.633588] FDC 0 is a post-1991 82077May 24 23:41:57 ubuntu-890-base kernel: [ 30.660888] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.May 24 23:41:57 ubuntu-890-base kernel: [ 30.661318] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22May 24 23:41:57 ubuntu-890-base kernel: [ 30.661329] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22May 24 23:41:57 ubuntu-890-base kernel: [ 30.661334] PCI: Setting latency timer of device 0000:00:08.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 30.996379] usb 1-3: new low speed USB device using ohci_hcd and address 2May 24 23:41:57 ubuntu-890-base kernel: [ 31.190178] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:f2:20May 24 23:41:57 ubuntu-890-base kernel: [ 31.190184] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 24 23:41:57 ubuntu-890-base kernel: [ 31.190626] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21May 24 23:41:57 ubuntu-890-base kernel: [ 31.190637] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AMC1] -> GSI 21 (level, low) -> IRQ 21May 24 23:41:57 ubuntu-890-base kernel: [ 31.190642] PCI: Setting latency timer of device 0000:00:09.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 31.224802] usb 1-3: configuration #1 chosen from 1 choiceMay 24 23:41:57 ubuntu-890-base kernel: [ 31.569112] usb 1-4: new full speed USB device using ohci_hcd and address 3May 24 23:41:57 ubuntu-890-base kernel: [ 31.719312] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:52:fd:c5May 24 23:41:57 ubuntu-890-base kernel: [ 31.719317] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3May 24 23:41:57 ubuntu-890-base kernel: [ 31.719883] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20May 24 23:41:57 ubuntu-890-base kernel: [ 31.719894] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20May 24 23:41:57 ubuntu-890-base kernel: [ 31.720053] PCI: Setting latency timer of device 0000:00:02.1 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 31.720059] ehci_hcd 0000:00:02.1: EHCI Host ControllerMay 24 23:41:57 ubuntu-890-base kernel: [ 31.720139] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2May 24 23:41:57 ubuntu-890-base kernel: [ 31.720169] ehci_hcd 0000:00:02.1: debug port 1May 24 23:41:57 ubuntu-890-base kernel: [ 31.720172] PCI: cache line size of 64 is not supported by device 0000:00:02.1May 24 23:41:57 ubuntu-890-base kernel: [ 31.720184] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000May 24 23:41:57 ubuntu-890-base kernel: [ 31.768786] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004May 24 23:41:57 ubuntu-890-base kernel: [ 31.768907] usb usb2: configuration #1 chosen from 1 choiceMay 24 23:41:57 ubuntu-890-base kernel: [ 31.768928] hub 2-0:1.0: USB hub foundMay 24 23:41:57 ubuntu-890-base kernel: [ 31.768936] hub 2-0:1.0: 10 ports detectedMay 24 23:41:57 ubuntu-890-base kernel: [ 31.879236] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17May 24 23:41:57 ubuntu-890-base kernel: [ 31.879247] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17May 24 23:41:57 ubuntu-890-base kernel: [ 31.879405] 3c59x: Donald Becker and others.May 24 23:41:57 ubuntu-890-base kernel: [ 31.879420] 0000:01:07.0: 3Com PCI 3c905C Tornado at ffffc20000178000.May 24 23:41:57 ubuntu-890-base kernel: [ 31.900149] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19May 24 23:41:57 ubuntu-890-base kernel: [ 31.900162] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19May 24 23:41:57 ubuntu-890-base kernel: [ 31.921930] PCI: Setting latency timer of device 0000:00:04.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 31.922338] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23May 24 23:41:57 ubuntu-890-base kernel: [ 31.922341] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23May 24 23:41:57 ubuntu-890-base kernel: [ 31.922354] PCI: Setting latency timer of device 0000:00:05.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 31.922360] ACPI: PCI interrupt for device 0000:00:05.0 disabledMay 24 23:41:57 ubuntu-890-base kernel: [ 31.922685] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22May 24 23:41:57 ubuntu-890-base kernel: [ 31.922687] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22May 24 23:41:57 ubuntu-890-base kernel: [ 31.922699] PCI: Setting latency timer of device 0000:00:05.1 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 31.922705] ACPI: PCI interrupt for device 0000:00:05.1 disabledMay 24 23:41:57 ubuntu-890-base kernel: [ 31.923026] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21May 24 23:41:57 ubuntu-890-base kernel: [ 31.923028] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21May 24 23:41:57 ubuntu-890-base kernel: [ 31.923040] PCI: Setting latency timer of device 0000:00:05.2 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 31.923046] ACPI: PCI interrupt for device 0000:00:05.2 disabledMay 24 23:41:57 ubuntu-890-base kernel: [ 31.950262] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8]May 24 23:41:57 ubuntu-890-base kernel: [ 31.951570] PCI: Enabling device 0000:06:00.1 (0000 -> 0001)May 24 23:41:57 ubuntu-890-base kernel: [ 31.951979] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16May 24 23:41:57 ubuntu-890-base kernel: [ 31.951989] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 24 23:41:57 ubuntu-890-base kernel: [ 31.952031] PCI: Setting latency timer of device 0000:06:00.1 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 31.952044] ACPI: PCI interrupt for device 0000:06:00.1 disabledMay 24 23:41:57 ubuntu-890-base kernel: [ 31.952425] ahci 0000:06:00.0: version 3.0May 24 23:41:57 ubuntu-890-base kernel: [ 31.952768] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16May 24 23:41:57 ubuntu-890-base kernel: [ 31.952770] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16May 24 23:41:57 ubuntu-890-base kernel: [ 32.168107] usb 1-4: device not accepting address 3, error -62May 24 23:41:57 ubuntu-890-base kernel: [ 32.225553] usb 1-3: USB disconnect, address 2May 24 23:41:57 ubuntu-890-base kernel: [ 32.956819] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA modeMay 24 23:41:57 ubuntu-890-base kernel: [ 32.956825] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part May 24 23:41:57 ubuntu-890-base kernel: [ 32.956830] PCI: Setting latency timer of device 0000:06:00.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 32.957632] scsi0 : ahciMay 24 23:41:57 ubuntu-890-base kernel: [ 32.957716] scsi1 : ahciMay 24 23:41:57 ubuntu-890-base kernel: [ 32.957742] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16May 24 23:41:57 ubuntu-890-base kernel: [ 32.957745] ata2: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16May 24 23:41:57 ubuntu-890-base kernel: [ 33.046644] usb 2-4: new high speed USB device using ehci_hcd and address 3May 24 23:41:57 ubuntu-890-base kernel: [ 33.198105] usb 2-4: configuration #1 chosen from 1 choiceMay 24 23:41:57 ubuntu-890-base kernel: [ 33.200177] usbcore: registered new interface driver hiddevMay 24 23:41:57 ubuntu-890-base kernel: [ 33.266396] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7a6f6]May 24 23:41:57 ubuntu-890-base kernel: [ 33.306226] ata1: SATA link down (SStatus 0 SControl 300)May 24 23:41:57 ubuntu-890-base kernel: [ 33.533350] usb 1-3: new low speed USB device using ohci_hcd and address 5May 24 23:41:57 ubuntu-890-base kernel: [ 33.653160] ata2: SATA link down (SStatus 0 SControl 300)May 24 23:41:57 ubuntu-890-base kernel: [ 33.657142] sata_nv 0000:00:05.0: version 3.5May 24 23:41:57 ubuntu-890-base kernel: [ 33.657158] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23May 24 23:41:57 ubuntu-890-base kernel: [ 33.657390] PCI: Setting latency timer of device 0000:00:05.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 33.658060] scsi2 : sata_nvMay 24 23:41:57 ubuntu-890-base kernel: [ 33.658567] scsi3 : sata_nvMay 24 23:41:57 ubuntu-890-base kernel: [ 33.658775] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23May 24 23:41:57 ubuntu-890-base kernel: [ 33.658777] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23May 24 23:41:57 ubuntu-890-base kernel: [ 33.762635] usb 1-3: configuration #1 chosen from 1 choiceMay 24 23:41:57 ubuntu-890-base kernel: [ 33.771624] hiddev96hidraw0: USB HID v1.00 Device [Lexmark 6500 Series] on usb-0000:00:02.1-4May 24 23:41:57 ubuntu-890-base kernel: [ 33.777704] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.0/input/input2May 24 23:41:57 ubuntu-890-base kernel: [ 33.825410] input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3May 24 23:41:57 ubuntu-890-base kernel: [ 33.833477] hiddev97hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-3May 24 23:41:57 ubuntu-890-base kernel: [ 33.833495] usbcore: registered new interface driver usbhidMay 24 23:41:57 ubuntu-890-base kernel: [ 33.833499] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driverMay 24 23:41:57 ubuntu-890-base kernel: [ 33.833623] usbcore: registered new interface driver libusualMay 24 23:41:57 ubuntu-890-base kernel: [ 33.838089] Initializing USB Mass Storage driver...May 24 23:41:57 ubuntu-890-base kernel: [ 33.838649] scsi4 : SCSI emulation for USB Mass Storage devicesMay 24 23:41:57 ubuntu-890-base kernel: [ 33.838714] usbcore: registered new interface driver usb-storageMay 24 23:41:57 ubuntu-890-base kernel: [ 33.838717] USB Mass Storage support registered.May 24 23:41:57 ubuntu-890-base kernel: [ 33.838845] usb-storage: device found at 3May 24 23:41:57 ubuntu-890-base kernel: [ 33.838847] usb-storage: waiting for device to settle before scanningMay 24 23:41:57 ubuntu-890-base kernel: [ 34.142342] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)May 24 23:41:57 ubuntu-890-base kernel: [ 34.185237] ata3.00: ATA-7: WDC WD2500JS-00SGB0, 20.06C03, max UDMA/133May 24 23:41:57 ubuntu-890-base kernel: [ 34.185241] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)May 24 23:41:57 ubuntu-890-base kernel: [ 34.205220] ata3.00: configured for UDMA/133May 24 23:41:57 ubuntu-890-base kernel: [ 34.534173] ata4: SATA link down (SStatus 0 SControl 300)May 24 23:41:57 ubuntu-890-base kernel: [ 34.544537] scsi 2:0:0:0: Direct-Access ATA WDC WD2500JS-00S 20.0 PQ: 0 ANSI: 5May 24 23:41:57 ubuntu-890-base kernel: [ 34.544624] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22May 24 23:41:57 ubuntu-890-base kernel: [ 34.544841] PCI: Setting latency timer of device 0000:00:05.1 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 34.545751] scsi5 : sata_nvMay 24 23:41:57 ubuntu-890-base kernel: [ 34.546146] scsi6 : sata_nvMay 24 23:41:57 ubuntu-890-base kernel: [ 34.546326] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22May 24 23:41:57 ubuntu-890-base kernel: [ 34.546328] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22May 24 23:41:57 ubuntu-890-base kernel: [ 34.869936] ata5: SATA link down (SStatus 0 SControl 300)May 24 23:41:57 ubuntu-890-base kernel: [ 35.209369] ata6: SATA link down (SStatus 0 SControl 300)May 24 23:41:57 ubuntu-890-base kernel: [ 35.220861] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21May 24 23:41:57 ubuntu-890-base kernel: [ 35.221086] PCI: Setting latency timer of device 0000:00:05.2 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 35.221189] scsi7 : sata_nvMay 24 23:41:57 ubuntu-890-base kernel: [ 35.221729] scsi8 : sata_nvMay 24 23:41:57 ubuntu-890-base kernel: [ 35.221907] ata7: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21May 24 23:41:57 ubuntu-890-base kernel: [ 35.221909] ata8: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21May 24 23:41:57 ubuntu-890-base kernel: [ 35.548801] ata7: SATA link down (SStatus 0 SControl 300)May 24 23:41:57 ubuntu-890-base kernel: [ 35.888239] ata8: SATA link down (SStatus 0 SControl 300)May 24 23:41:57 ubuntu-890-base kernel: [ 35.899891] ACPI: PCI Interrupt 0000:06:00.1[B] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16May 24 23:41:57 ubuntu-890-base kernel: [ 35.899949] PCI: Setting latency timer of device 0000:06:00.1 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 35.900000] pata_amd 0000:00:04.0: version 0.3.10May 24 23:41:57 ubuntu-890-base kernel: [ 35.900034] PCI: Setting latency timer of device 0000:00:04.0 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 35.900905] scsi10 : pata_amdMay 24 23:41:57 ubuntu-890-base kernel: [ 35.900969] scsi9 : pata_jmicronMay 24 23:41:57 ubuntu-890-base kernel: [ 35.901001] scsi11 : pata_amdMay 24 23:41:57 ubuntu-890-base kernel: [ 35.901639] ata11: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14May 24 23:41:57 ubuntu-890-base kernel: [ 35.901641] ata12: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15May 24 23:41:57 ubuntu-890-base kernel: [ 35.901652] scsi12 : pata_jmicronMay 24 23:41:57 ubuntu-890-base kernel: [ 35.901676] ata9: PATA max UDMA/100 cmd 0x8c00 ctl 0x8800 bmdma 0x7c00 irq 16May 24 23:41:57 ubuntu-890-base kernel: [ 35.901677] ata10: PATA max UDMA/100 cmd 0x8400 ctl 0x8000 bmdma 0x7c08 irq 16May 24 23:41:57 ubuntu-890-base kernel: [ 35.906092] Driver 'sd' needs updating - please use bus_type methodsMay 24 23:41:57 ubuntu-890-base kernel: [ 35.906180] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 24 23:41:57 ubuntu-890-base kernel: [ 35.906190] sd 2:0:0:0: [sda] Write Protect is offMay 24 23:41:57 ubuntu-890-base kernel: [ 35.906192] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00May 24 23:41:57 ubuntu-890-base kernel: [ 35.906204] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 24 23:41:57 ubuntu-890-base kernel: [ 35.906245] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)May 24 23:41:57 ubuntu-890-base kernel: [ 35.906252] sd 2:0:0:0: [sda] Write Protect is offMay 24 23:41:57 ubuntu-890-base kernel: [ 35.906254] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00May 24 23:41:57 ubuntu-890-base kernel: [ 35.906264] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 24 23:41:57 ubuntu-890-base kernel: [ 35.906268] sda: sda1 sda2 < sda5 sda6 >May 24 23:41:57 ubuntu-890-base kernel: [ 35.943602] sd 2:0:0:0: [sda] Attached SCSI diskMay 24 23:41:57 ubuntu-890-base kernel: [ 35.946233] sd 2:0:0:0: Attached scsi generic sg0 type 0May 24 23:41:57 ubuntu-890-base kernel: [ 36.437557] ata11.01: ATAPI: LITE-ON LTR-52327S, QS06, max UDMA/33May 24 23:41:57 ubuntu-890-base kernel: [ 36.637153] ata11.01: configured for UDMA/33May 24 23:41:57 ubuntu-890-base kernel: [ 36.637189] ata12: port disabled. ignoring.May 24 23:41:57 ubuntu-890-base kernel: [ 36.651781] scsi 10:0:1:0: CD-ROM LITE-ON LTR-52327S QS06 PQ: 0 ANSI: 5May 24 23:41:57 ubuntu-890-base kernel: [ 36.651859] scsi 10:0:1:0: Attached scsi generic sg1 type 5May 24 23:41:57 ubuntu-890-base kernel: [ 36.657602] Driver 'sr' needs updating - please use bus_type methodsMay 24 23:41:57 ubuntu-890-base kernel: [ 36.731953] sr0: scsi3-mmc drive: 186x/52x writer cd/rw xa/form2 cdda trayMay 24 23:41:57 ubuntu-890-base kernel: [ 36.731959] Uniform CD-ROM driver Revision: 3.20May 24 23:41:57 ubuntu-890-base kernel: [ 36.732010] sr 10:0:1:0: Attached scsi CD-ROM sr0May 24 23:41:57 ubuntu-890-base kernel: [ 38.824770] usb-storage: device scan completeMay 24 23:41:57 ubuntu-890-base kernel: [ 38.833439] scsi 4:0:0:0: Direct-Access Lexmark USB Mass Storage 200 PQ: 0 ANSI: 0May 24 23:41:57 ubuntu-890-base kernel: [ 38.838608] sd 4:0:0:0: [sdb] Attached SCSI removable diskMay 24 23:41:57 ubuntu-890-base kernel: [ 38.838648] sd 4:0:0:0: Attached scsi generic sg2 type 0May 24 23:41:57 ubuntu-890-base kernel: [ 41.243726] Attempting manual resumeMay 24 23:41:57 ubuntu-890-base kernel: [ 41.243730] swsusp: Resume From Partition 8:6May 24 23:41:57 ubuntu-890-base kernel: [ 41.243731] PM: Checking swsusp image.May 24 23:41:57 ubuntu-890-base kernel: [ 41.243909] PM: Resume from disk failed.May 24 23:41:57 ubuntu-890-base kernel: [ 41.281346] kjournald starting. Commit interval 5 secondsMay 24 23:41:57 ubuntu-890-base kernel: [ 41.282527] EXT3-fs: mounted filesystem with ordered data mode.May 24 23:41:57 ubuntu-890-base kernel: [ 46.946586] input: PC Speaker as /devices/platform/pcspkr/input/input3May 24 23:41:57 ubuntu-890-base kernel: [ 47.003496] pci_hotplug: PCI Hot Plug PCI Core version: 0.5May 24 23:41:57 ubuntu-890-base kernel: [ 47.092344] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4May 24 23:41:57 ubuntu-890-base kernel: [ 47.157032] parport_pc 00:09: reported by Plug and Play ACPIMay 24 23:41:57 ubuntu-890-base kernel: [ 47.157091] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]May 24 23:41:57 ubuntu-890-base kernel: [ 47.179714] input: Power Button (FF) as /devices/virtual/input/input4May 24 23:41:57 ubuntu-890-base kernel: [ 47.326719] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00May 24 23:41:57 ubuntu-890-base kernel: [ 47.326734] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40May 24 23:41:57 ubuntu-890-base kernel: [ 47.489081] ACPI: Power Button (FF) [PWRF]May 24 23:41:57 ubuntu-890-base kernel: [ 47.489153] input: Power Button (CM) as /devices/virtual/input/input5May 24 23:41:57 ubuntu-890-base kernel: [ 47.618877] ACPI: Power Button (CM) [PWRB]May 24 23:41:57 ubuntu-890-base kernel: [ 47.702483] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20May 24 23:41:57 ubuntu-890-base kernel: [ 47.702489] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20May 24 23:41:57 ubuntu-890-base kernel: [ 47.702681] PCI: Setting latency timer of device 0000:00:06.1 to 64May 24 23:41:57 ubuntu-890-base kernel: [ 47.743830] eth0: no link during initialization.May 24 23:41:57 ubuntu-890-base kernel: [ 48.035183] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x043D pid 0x010FMay 24 23:41:57 ubuntu-890-base kernel: [ 48.035203] usbcore: registered new interface driver usblpMay 24 23:41:57 ubuntu-890-base kernel: [ 49.041090] NET: Registered protocol family 17May 24 23:41:57 ubuntu-890-base kernel: [ 49.803469] loop: module loadedMay 24 23:41:57 ubuntu-890-base kernel: [ 49.832537] lp0: using parport0 (interrupt-driven).May 24 23:41:57 ubuntu-890-base kernel: [ 50.003062] Adding 1494004k swap on /dev/sda6. Priority:-1 extents:1 across:1494004kMay 24 23:41:57 ubuntu-890-base kernel: [ 50.565216] EXT3 FS on sda5, internal journalMay 24 23:41:57 ubuntu-890-base kernel: [ 50.709283] device-mapper: uevent: version 1.0.3May 24 23:41:57 ubuntu-890-base kernel: [ 50.709316] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.comMay 24 23:41:57 ubuntu-890-base kernel: [ 52.073723] ip_tables: (C) 2000-2006 Netfilter Core TeamMay 24 23:41:57 ubuntu-890-base kernel: [ 54.355145] No dock devices found.May 24 23:41:59 ubuntu-890-base kernel: [ 56.636517] audit(1243222919.911:2): type=1503 operation="capable" name="sys_resource" pid=5531 profile="/usr/sbin/named" namespace="default"May 24 23:41:59 ubuntu-890-base kernel: [ 56.684238] NET: Registered protocol family 10May 24 23:41:59 ubuntu-890-base kernel: [ 56.684456] lo: Disabled Privacy ExtensionsMay 24 23:41:59 ubuntu-890-base kernel: [ 56.684876] ADDRCONF(NETDEV_UP): eth0: link is not readyMay 24 23:42:11 ubuntu-890-base kernel: [ 68.645618] ppdev: user-space parallel port driverMay 24 23:42:12 ubuntu-890-base kernel: [ 68.724544] audit(1243222932.012:3): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5998 profile="/usr/sbin/cupsd" namespace="default"May 24 23:42:14 ubuntu-890-base kernel: [ 71.163741] device eth0 entered promiscuous modeMay 24 23:42:14 ubuntu-890-base kernel: [ 71.163751] audit(1243222934.460:4): dev=eth0 prom=256 old_prom=0 auid=4294967295May 24 23:42:14 ubuntu-890-base kernel: [ 71.193674] device eth0 left promiscuous modeMay 24 23:42:14 ubuntu-890-base kernel: [ 71.193678] audit(1243222934.490:5): dev=eth0 prom=0 old_prom=256 auid=4294967295May 24 23:42:14 ubuntu-890-base kernel: [ 71.223634] device eth0 entered promiscuous modeMay 24 23:42:14 ubuntu-890-base kernel: [ 71.223647] audit(1243222934.520:6): dev=eth0 prom=256 old_prom=0 auid=4294967295May 24 23:42:16 ubuntu-890-base kernel: [ 73.210992] eth1: no link during initialization.May 24 23:42:16 ubuntu-890-base kernel: [ 73.211423] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 24 23:42:16 ubuntu-890-base kernel: [ 73.268734] eth2: setting full-duplex.May 24 23:42:16 ubuntu-890-base kernel: [ 73.337775] Bluetooth: Core ver 2.11May 24 23:42:16 ubuntu-890-base kernel: [ 73.350231] NET: Registered protocol family 31May 24 23:42:16 ubuntu-890-base kernel: [ 73.350235] Bluetooth: HCI device and connection manager initializedMay 24 23:42:16 ubuntu-890-base kernel: [ 73.350239] Bluetooth: HCI socket layer initializedMay 24 23:42:16 ubuntu-890-base kernel: [ 73.374317] Bluetooth: L2CAP ver 2.9May 24 23:42:16 ubuntu-890-base kernel: [ 73.374324] Bluetooth: L2CAP socket layer initializedMay 24 23:42:16 ubuntu-890-base kernel: [ 73.397104] Bluetooth: RFCOMM socket layer initializedMay 24 23:42:16 ubuntu-890-base kernel: [ 73.397126] Bluetooth: RFCOMM TTY layer initializedMay 24 23:42:16 ubuntu-890-base kernel: [ 73.397127] Bluetooth: RFCOMM ver 1.8May 24 23:42:33 ubuntu-890-base kernel: [ 90.303384] eth2: no IPv6 routers presentxorgConf:# xorg.conf (X.Org X Window System server configuration file)## This file was generated by dexconf, the Debian X Configuration tool, using# values from the debconf database.## Edit this file with caution, and see the xorg.conf manual page.# (Type "man xorg.conf" at the shell prompt.)## This file is automatically updated on xserver-xorg package upgrades *only*# if it has not been modified since the last upgrade of the xserver-xorg# package.## If you have edited this file but would like it to be automatically updated# again, run the following command:# sudo dpkg-reconfigure -phigh xserver-xorgSection "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" Option "XkbVariant" "intl" Option "XkbOptions" "lv3:ralt_switch"EndSectionSection "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer"EndSectionSection "Device" Identifier "Configured Video Device"EndSectionSection "Monitor" Identifier "Configured Monitor"EndSectionSection "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device"EndSectionSection "ServerLayout" Identifier "Default Layout" Screen "Default Screen"EndSectionlspci:00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)00:01.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control01:06.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 5598/6326 (rev 0b)01:07.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)01:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)06:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)06:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)07:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GS] (rev a1)