All pastes #1432024 Raw Edit

ivan

public text v1 · immutable
#1432024 ·published 2009-05-23 14:48 UTC
rendered paste body
c-0x18cf]
pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4604000-0xf46047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xf4000000-0xf4001fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf40fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xf4102000-0xf410207f]
pci 0000:03:00.0: reg 18 64bit mmio: [0xf4100000-0xf4101fff]
pci 0000:03:00.0: reg 20 io port: [0x3000-0x307f]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xf4100000-0xf41fffff]
pci 0000:04:00.0: reg 10 io port: [0x4000-0x40ff]
pci 0000:04:00.0: reg 18 64bit mmio: [0xf4200000-0xf4200fff]
pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xf4200000-0xf42fffff]
pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xf2000000-0xf3ffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
pci 0000:0c:06.0: reg 10 32bit mmio: [0xf4300000-0xf4300fff]
pci 0000:0c:06.0: supports D1 D2
pci 0000:0c:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:0c:06.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf4300000-0xf43fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 *3 4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:08: ioport range 0x1200-0x120f has been reserved
system 00:08: ioport range 0x800-0x80f has been reserved
system 00:08: ioport range 0x1000-0x107f has been reserved
system 00:08: ioport range 0x1180-0x11bf has been reserved
system 00:08: ioport range 0xfe00-0xfe00 has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x2000-0x2fff
pci 0000:00:01.0:   MEM window: 0xcc000000-0xceffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: 0xf4000000-0xf40fffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
pci 0000:00:1c.1:   MEM window: 0xf4100000-0xf41fffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
pci 0000:00:1c.2:   MEM window: 0xf4200000-0xf42fffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000c2000000-0x000000c20fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3:   IO window: disabled
pci 0000:00:1c.3:   MEM window: disabled
pci 0000:00:1c.3:   PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.4:   IO window: 0x5000-0x5fff
pci 0000:00:1c.4:   MEM window: 0xf2000000-0xf3ffffff
pci 0000:00:1c.4:   PREFETCH window: 0x000000f0000000-0x000000f1ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xf4300000-0xf43fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
bus: 01 index 0 io port: [0x2000-0x2fff]
bus: 01 index 1 mmio: [0xcc000000-0xceffffff]
bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 mmio: [0x0-0x0]
bus: 02 index 1 mmio: [0xf4000000-0xf40fffff]
bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0x3000-0x3fff]
bus: 03 index 1 mmio: [0xf4100000-0xf41fffff]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 io port: [0x4000-0x4fff]
bus: 04 index 1 mmio: [0xf4200000-0xf42fffff]
bus: 04 index 2 mmio: [0xc2000000-0xc20fffff]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 05 index 0 mmio: [0x0-0x0]
bus: 05 index 1 mmio: [0x0-0x0]
bus: 05 index 2 mmio: [0x0-0x0]
bus: 05 index 3 mmio: [0x0-0x0]
bus: 06 index 0 io port: [0x5000-0x5fff]
bus: 06 index 1 mmio: [0xf2000000-0xf3ffffff]
bus: 06 index 2 mmio: [0xf0000000-0xf1ffffff]
bus: 06 index 3 mmio: [0x0-0x0]
bus: 0c index 0 mmio: [0x0-0x0]
bus: 0c index 1 mmio: [0xf4300000-0xf43fffff]
bus: 0c index 2 mmio: [0x0-0x0]
bus: 0c index 3 io port: [0x00-0xffff]
bus: 0c index 4 mmio: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 16957k freed
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1243075109.512:1): initialized
msgmni has been set to 6034
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:01:00.0: Boot video device
ACPI Error (psargs-0358): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf851850), AE_NOT_FOUND
ACPI Error (psargs-0358): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8800bf851850), AE_NOT_FOUND
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pcieport-driver 0000:00:01.0: irq 1279 for MSI/MSI-X
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie02: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 1278 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pcieport-driver 0000:00:1c.1: irq 1277 for MSI/MSI-X
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pcieport-driver 0000:00:1c.2: irq 1276 for MSI/MSI-X
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pcieport-driver 0000:00:1c.3: irq 1275 for MSI/MSI-X
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pcieport-driver 0000:00:1c.4: irq 1274 for MSI/MSI-X
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03)
pci 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x18a0-0x18a7
    ide1: BM-DMA at 0x18a8-0x18af
Probing IDE interface ide0...
hda: Optiarc DVD RW AD-7563A, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 372k freed
libata version 3.00 loaded.
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /class/input/input0
sata_sil24 0000:03:00.0: version 1.1
sata_sil24 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sata_sil24 0000:03:00.0: setting latency timer to 64
scsi0 : sata_sil24
ata1: SATA max UDMA/100 host m128@0xf4102000 port 0xf4100000 irq 17
input: AT Translated Set 2 keyboard as /class/input/input1
ata1: SATA link down (SStatus 0 SControl 0)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: irq 1273 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata2: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604100 irq 1273
ata3: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604180 irq 1273
ata4: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604200 irq 1273
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ACPI Warning (nspredef-0852): \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20080926]
ata2.00: _GTF unexpected object type 0x1
ata2.00: ATA-8: Hitachi HTS542520K9SA00, BBDOC31P, max UDMA/133
ata2.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: _GTF unexpected object type 0x1
ata2.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi 1:0:0:0: Direct-Access     ATA      Hitachi HTS54252 BBDO PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
Adaptec aacraid driver 1.1-5[2456]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
QLogic Fibre Channel HBA Driver: 8.02.01-k9
Emulex LightPulse Fibre Channel SCSI driver 8.2.8
Copyright(c) 2004-2008 Emulex.  All rights reserved.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4604800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4604c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
usb 1-3: new high speed USB device using ehci_hcd and address 2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usb 1-3: configuration #1 chosen from 1 choice
usb 2-4: new high speed USB device using ehci_hcd and address 2
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
   generic_sse:  6088.000 MB/sec
xor: using function: generic_sse (6088.000 MB/sec)
raid6: int64x1   1505 MB/s
raid6: int64x2   1884 MB/s
usb 2-4: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
raid6: int64x4   1434 MB/s
raid6: int64x8   1180 MB/s
raid6: sse2x1    2691 MB/s
raid6: sse2x2    2938 MB/s
raid6: sse2x4    4986 MB/s
raid6: using algorithm sse2x4 (4986 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb-storage: device scan complete
isa bounce pool size: 16 pages
scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg1 type 0
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: Battery Slot [BAT0] (battery present)
input: PC Speaker as /class/input/input5
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 1272 for MSI/MSI-X
eth0: RTL8168b/8111b at 0xffffc20000074000, 00:e0:b8:db:c6:e6, XID 38000000 IRQ 1272
acpi device:05: registered as cooling_device0
input: Video Bus as /class/input/input6
ACPI: SSDT BFED8181, 01F6 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
ACPI: SSDT BFED7C71, 048B (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
ACPI: Medion 41700 detected - limiting to C1 max_cstate. Override with "processor.max_cstate=9"
ACPI: processor limited to max C-state 1
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device1
ACPI: SSDT BFED8377, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
ACPI: SSDT BFED80FC, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device2
thermal LNXTHERM:01: registered as thermal_zone0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: Thermal Zone [TZS0] (55 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (60 C)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
ACPI: Device needs an ACPI driver
Linux video capture interface: v2.00
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.51  Fri Apr 17 00:08:33 PDT 2009
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b027)
input: USB 2.0 Camera as /class/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
EXT3 FS on sda2, internal journal
r8169: eth0: link up
r8169: eth0: link up
rtc_cmos 00:09: RTC can wake from S4
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
usb 2-1: new high speed USB device using ehci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
videobuf_vmalloc: disagrees about version of symbol videobuf_queue_core_init
videobuf_vmalloc: Unknown symbol videobuf_queue_core_init
videobuf_vmalloc: disagrees about version of symbol videobuf_queue_cancel
videobuf_vmalloc: Unknown symbol videobuf_queue_cancel
videobuf_vmalloc: disagrees about version of symbol videobuf_queue_core_init
videobuf_vmalloc: Unknown symbol videobuf_queue_core_init
videobuf_vmalloc: disagrees about version of symbol videobuf_queue_cancel
videobuf_vmalloc: Unknown symbol videobuf_queue_cancel
videobuf_vmalloc: disagrees about version of symbol videobuf_queue_core_init
videobuf_vmalloc: Unknown symbol videobuf_queue_core_init
videobuf_vmalloc: disagrees about version of symbol videobuf_queue_cancel
videobuf_vmalloc: Unknown symbol videobuf_queue_cancel
videobuf_vmalloc: disagrees about version of symbol videobuf_queue_core_init
videobuf_vmalloc: Unknown symbol videobuf_queue_core_init
videobuf_vmalloc: disagrees about version of symbol videobuf_queue_cancel
videobuf_vmalloc: Unknown symbol videobuf_queue_cancel
au0828: disagrees about version of symbol videobuf_streamoff
au0828: Unknown symbol videobuf_streamoff
au0828: disagrees about version of symbol videobuf_poll_stream
au0828: Unknown symbol videobuf_poll_stream
au0828: disagrees about version of symbol videobuf_reqbufs
au0828: Unknown symbol videobuf_reqbufs
au0828: disagrees about version of symbol videobuf_queue_is_busy
au0828: Unknown symbol videobuf_queue_is_busy
au0828: disagrees about version of symbol videobuf_dqbuf
au0828: Unknown symbol videobuf_dqbuf
au0828: Unknown symbol videobuf_to_vmalloc
au0828: Unknown symbol videobuf_vmalloc_free
au0828: disagrees about version of symbol videobuf_stop
au0828: Unknown symbol videobuf_stop
au0828: disagrees about version of symbol videobuf_read_stream
au0828: Unknown symbol videobuf_read_stream
au0828: disagrees about version of symbol videobuf_querybuf
au0828: Unknown symbol videobuf_querybuf
au0828: disagrees about version of symbol videobuf_qbuf
au0828: Unknown symbol videobuf_qbuf
au0828: disagrees about version of symbol videobuf_iolock
au0828: Unknown symbol videobuf_iolock
au0828: disagrees about version of symbol videobuf_streamon
au0828: Unknown symbol videobuf_streamon
au0828: Unknown symbol videobuf_queue_vmalloc_init
au0828: disagrees about version of symbol videobuf_mmap_mapper
au0828: Unknown symbol videobuf_mmap_mapper
au0828: disagrees about version of symbol videobuf_cgmbuf
au0828: Unknown symbol videobuf_cgmbuf
au0828: disagrees about version of symbol videobuf_mmap_free
au0828: Unknown symbol videobuf_mmap_free
au0828: disagrees about version of symbol videobuf_streamoff
au0828: Unknown symbol videobuf_streamoff
au0828: disagrees about version of symbol videobuf_poll_stream
au0828: Unknown symbol videobuf_poll_stream
au0828: disagrees about version of symbol videobuf_reqbufs
au0828: Unknown symbol videobuf_reqbufs
au0828: disagrees about version of symbol videobuf_queue_is_busy
au0828: Unknown symbol videobuf_queue_is_busy
au0828: disagrees about version of symbol videobuf_dqbuf
au0828: Unknown symbol videobuf_dqbuf
au0828: Unknown symbol videobuf_to_vmalloc
au0828: Unknown symbol videobuf_vmalloc_free
au0828: disagrees about version of symbol videobuf_stop
au0828: Unknown symbol videobuf_stop
au0828: disagrees about version of symbol videobuf_read_stream
au0828: Unknown symbol videobuf_read_stream
au0828: disagrees about version of symbol videobuf_querybuf
au0828: Unknown symbol videobuf_querybuf
au0828: disagrees about version of symbol videobuf_qbuf
au0828: Unknown symbol videobuf_qbuf
au0828: disagrees about version of symbol videobuf_iolock
au0828: Unknown symbol videobuf_iolock
au0828: disagrees about version of symbol videobuf_streamon
au0828: Unknown symbol videobuf_streamon
au0828: Unknown symbol videobuf_queue_vmalloc_init
au0828: disagrees about version of symbol videobuf_mmap_mapper
au0828: Unknown symbol videobuf_mmap_mapper
au0828: disagrees about version of symbol videobuf_cgmbuf
au0828: Unknown symbol videobuf_cgmbuf
au0828: disagrees about version of symbol videobuf_mmap_free
au0828: Unknown symbol videobuf_mmap_free
au0828: disagrees about version of symbol videobuf_streamoff
au0828: Unknown symbol videobuf_streamoff
au0828: disagrees about version of symbol videobuf_poll_stream
au0828: Unknown symbol videobuf_poll_stream
au0828: disagrees about version of symbol videobuf_reqbufs
au0828: Unknown symbol videobuf_reqbufs
au0828: disagrees about version of symbol videobuf_queue_is_busy
au0828: Unknown symbol videobuf_queue_is_busy
au0828: disagrees about version of symbol videobuf_dqbuf
au0828: Unknown symbol videobuf_dqbuf
au0828: Unknown symbol videobuf_to_vmalloc
au0828: Unknown symbol videobuf_vmalloc_free
au0828: disagrees about version of symbol videobuf_stop
au0828: Unknown symbol videobuf_stop
au0828: disagrees about version of symbol videobuf_read_stream
au0828: Unknown symbol videobuf_read_stream
au0828: disagrees about version of symbol videobuf_querybuf
au0828: Unknown symbol videobuf_querybuf
au0828: disagrees about version of symbol videobuf_qbuf
au0828: Unknown symbol videobuf_qbuf
au0828: disagrees about version of symbol videobuf_iolock
au0828: Unknown symbol videobuf_iolock
au0828: disagrees about version of symbol videobuf_streamon
au0828: Unknown symbol videobuf_streamon
au0828: Unknown symbol videobuf_queue_vmalloc_init
au0828: disagrees about version of symbol videobuf_mmap_mapper
au0828: Unknown symbol videobuf_mmap_mapper
au0828: disagrees about version of symbol videobuf_cgmbuf
au0828: Unknown symbol videobuf_cgmbuf
au0828: disagrees about version of symbol videobuf_mmap_free
au0828: Unknown symbol videobuf_mmap_free
au0828: disagrees about version of symbol videobuf_streamoff
au0828: Unknown symbol videobuf_streamoff
au0828: disagrees about version of symbol videobuf_poll_stream
au0828: Unknown symbol videobuf_poll_stream
au0828: disagrees about version of symbol videobuf_reqbufs
au0828: Unknown symbol videobuf_reqbufs
au0828: disagrees about version of symbol videobuf_queue_is_busy
au0828: Unknown symbol videobuf_queue_is_busy
au0828: disagrees about version of symbol videobuf_dqbuf
au0828: Unknown symbol videobuf_dqbuf
au0828: Unknown symbol videobuf_to_vmalloc
au0828: Unknown symbol videobuf_vmalloc_free
au0828: disagrees about version of symbol videobuf_stop
au0828: Unknown symbol videobuf_stop
au0828: disagrees about version of symbol videobuf_read_stream
au0828: Unknown symbol videobuf_read_stream
au0828: disagrees about version of symbol videobuf_querybuf
au0828: Unknown symbol videobuf_querybuf
au0828: disagrees about version of symbol videobuf_qbuf
au0828: Unknown symbol videobuf_qbuf
au0828: disagrees about version of symbol videobuf_iolock
au0828: Unknown symbol videobuf_iolock
au0828: disagrees about version of symbol videobuf_streamon
au0828: Unknown symbol videobuf_streamon
au0828: Unknown symbol videobuf_queue_vmalloc_init
au0828: disagrees about version of symbol videobuf_mmap_mapper
au0828: Unknown symbol videobuf_mmap_mapper
au0828: disagrees about version of symbol videobuf_cgmbuf
au0828: Unknown symbol videobuf_cgmbuf
au0828: disagrees about version of symbol videobuf_mmap_free
au0828: Unknown symbol videobuf_mmap_free
usbcore: registered new interface driver snd-usb-audio