rendered paste bodyLinux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Sat May 9 12:47:43 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff60000 (usable)
BIOS-e820: 000000001ff60000 - 000000001ff77000 (ACPI data)
BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x1ff60 max_arch_pfn = 0x100000
Scanning 2 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 0000000000007000 (usable)
modified: 0000000000007000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 0000000000092000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 00000000000d2000 - 00000000000d4000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000001ff60000 (usable)
modified: 000000001ff60000 - 000000001ff77000 (ACPI data)
modified: 000000001ff77000 - 000000001ff79000 (ACPI NVS)
modified: 000000001ff80000 - 0000000020000000 (reserved)
modified: 00000000ff800000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 1ff60000 @ 10000-15000
RAMDISK: 1febd000 - 1ff4f93d
ACPI: RSDP 000F6D70, 0024 (r2 IBM )
ACPI: XSDT 1FF6A672, 004C (r1 IBM TP-1R 3230 LTP 0)
ACPI: FACP 1FF6A700, 00F4 (r3 IBM TP-1R 3230 IBM 1)
ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/32 [20081204]
ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 0/32 [20081204]
ACPI Warning (tbfadt-0596): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20081204]
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 1FF6A8E7, C530 (r1 IBM TP-1R 3230 MSFT 100000E)
ACPI: FACS 1FF78000, 0040
ACPI: SSDT 1FF6A8B4, 0033 (r1 IBM TP-1R 3230 MSFT 100000E)
ACPI: ECDT 1FF76E17, 0052 (r1 IBM TP-1R 3230 IBM 1)
ACPI: TCPA 1FF76E69, 0032 (r1 IBM TP-1R 3230 PTL 1)
ACPI: BOOT 1FF76FD8, 0028 (r1 IBM TP-1R 3230 LTP 1)
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1ff60000
low ram: 00000000 - 1ff60000
bootmap 00011000 - 00014fec
(9 early reservations) ==> bootmem [0000000000 - 001ff60000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005a2604] TEXT DATA BSS ==> [0000100000 - 00005a2604]
#4 [001febd000 - 001ff4f93d] RAMDISK ==> [001febd000 - 001ff4f93d]
#5 [00005a3000 - 00005a6000] INIT_PG_TABLE ==> [00005a3000 - 00005a6000]
#6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001ff60
HighMem 0x0001ff60 -> 0x0001ff60
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x00000007
0: 0x00000010 -> 0x00000092
0: 0x00000100 -> 0x0001ff60
On node 0 totalpages: 130789
free_area_init_node: node 0, pgdat c0430600, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3941 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125825 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 0000000000007000 - 0000000000010000
PM: Registered nosave memory: 0000000000092000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129766
Kernel command line: root=/dev/disk/by-uuid/4af73d58-45de-4675-803c-8dffa8d72f36 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1598.345 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512984k/523648k available (2361k kernel code, 9928k reserved, 1060k data, 340k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0760000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdff60000 ( 511 MB)
.init : 0xc045d000 - 0xc04b2000 ( 340 kB)
.data : 0xc034e7c4 - 0xc0457a88 (1060 kB)
.text : 0xc0100000 - 0xc034e7c4 (2361 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3197.88 BogoMIPS (lpj=5327816)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20081204
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (3197.88 BogoMIPS).
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0000000-0xc00003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0000c00-0xc0000dff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0000800-0xc00008ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 32bit mmio: [0xb1000000-0xb1000fff]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:01.0: reg 10 32bit mmio: [0xc0220000-0xc023ffff]
pci 0000:02:01.0: reg 14 32bit mmio: [0xc0200000-0xc020ffff]
pci 0000:02:01.0: reg 18 io port: [0x8000-0x803f]
pci 0000:02:01.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xc0200000-0xcfffffff]
pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: Power Resource [PUBS] (on)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x162f has been reserved
system 00:02: ioport range 0x1632-0x167f has been reserved
system 00:02: ioport range 0x1630-0x1631 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x3000-0x3fff
pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff
pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:00.0: IO window: 0x004000-0x0040ff
pci 0000:02:00.0: IO window: 0x004400-0x0044ff
pci 0000:02:00.0: PREFETCH window: 0xe8000000-0xebffffff
pci 0000:02:00.0: MEM window: 0xc4000000-0xc7ffffff
pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
pci 0000:02:00.1: IO window: 0x004800-0x0048ff
pci 0000:02:00.1: IO window: 0x004c00-0x004cff
pci 0000:02:00.1: PREFETCH window: 0xec000000-0xefffffff
pci 0000:02:00.1: MEM window: 0xc8000000-0xcbffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x4000-0x8fff
pci 0000:00:1e.0: MEM window: 0xc0200000-0xcfffffff
pci 0000:00:1e.0: PREFETCH window: 0x000000e8000000-0x000000efffffff
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
pci_bus 0000:01: resource 2 mem: [0xe0000000-0xe7ffffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
pci_bus 0000:02: resource 1 mem: [0xc0200000-0xcfffffff]
pci_bus 0000:02: resource 2 mem: [0xe8000000-0xefffffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
pci_bus 0000:03: resource 2 mem: [0xe8000000-0xebffffff]
pci_bus 0000:03: resource 3 mem: [0xc4000000-0xc7ffffff]
pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
pci_bus 0000:07: resource 2 mem: [0xec000000-0xefffffff]
pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 586k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1242893551.256:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1003
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
serial 00:0a: activated
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
IO APIC resources could be not be allocated.
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 340k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Switched to high resolution mode on CPU 0
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
ata1.00: HPA detected: current 71029746, native 78140160
ata1.00: ATA-6: HTS548040M9AT00, MG2OA5BA, max UDMA/100
ata1.00: 71029746 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HTS548040M9AT00 MG2O PQ: 0 ANSI: 5
ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8083N, 0K03, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8083N 0K03 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 71029746 512-byte hardware sectors: (36.3 GB/33.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 71029746 512-byte hardware sectors: (36.3 GB/33.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs: barriers enabled
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
kjournald2 starting: pid 512, dev sda2:8, commit interval 5 seconds
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda2 with ordered data mode
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
udev: starting version 141
yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0552]
yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21b22, devctl 0x64
yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x04b8, PCI irq 11
yenta_cardbus 0000:02:00.0: Socket status: 30000020
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0552]
yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21b22, devctl 0x64
yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x04b8, PCI irq 11
yenta_cardbus 0000:02:00.1: Socket status: 30000086
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:03:00.0: reg 10 32bit mmio: [0xd0000000-0xd000ffff]
pci 0000:03:00.0: reg 14 32bit mmio: [0xc0000000-0xc000ffff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ndiswrapper version 1.54 loaded (smp=yes, preempt=yes)
ndiswrapper: driver wg511v2 (NETGEAR,02/22/2005,3.1.1.7) loaded
ndiswrapper 0000:03:00.0: enabling device (0000 -> 0002)
ndiswrapper 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ndiswrapper 0000:03:00.0: setting latency timer to 64
ndiswrapper: using IRQ 11
wlan0: ethernet device 00:1b:2f:cf:c9:10 using NDIS driver: wg511v2, version: 0x3000036, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 11AB:1FAA.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new interface driver ndiswrapper
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
Marking TSC unstable due to TSC halts in idle
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (39 C)
NET: Registered protocol family 23
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input5
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc 00:0c: disabled
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 855PM Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
input: PC Speaker as /devices/platform/pcspkr/input/input6
intel_rng: FWH not detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
lp0: using parport0 (interrupt-driven).
Non-volatile memory driver v1.3
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ppdev: user-space parallel port driver
e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:10:c6:e1:b9:fe
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Error: Driver 'pcspkr' is already registered, aborting...
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH 0000:00:1f.5: setting latency timer to 64
thinkpad_acpi: ThinkPad ACPI Extras v0.22
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 1RETDRWW (3.23 ), EC 1RHT71WW-3.04
thinkpad_acpi: IBM ThinkPad T41 , model 23738RU
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /devices/virtual/input/input7
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
Clocksource tsc unstable (delta = -315559559 ns)
intel8x0_measure_ac97_clock: measured 52616 usecs
intel8x0: clocking to 48000
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
EXT4 FS on sda2, internal journal on sda2:8
Adding 979924k swap on /dev/sda1. Priority:-1 extents:1 across:979924k
psmouse serio2: ID: 10 00 64<6>IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
fuse init (API version 7.11)
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present