rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29-stikonas9 (root@stikonas-and) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #37 SMP Sun May 17 20:47:42 EEST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000027fd0000 (usable)
[ 0.000000] BIOS-e820: 0000000027fd0000 - 0000000027fefc00 (reserved)
[ 0.000000] BIOS-e820: 0000000027fefc00 - 0000000027ffb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000027ffb000 - 0000000030000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x27fd0 max_arch_pfn = 0x1000000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000100 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000027fd0000 (usable)
[ 0.000000] modified: 0000000027fd0000 - 0000000027fefc00 (reserved)
[ 0.000000] modified: 0000000027fefc00 - 0000000027ffb000 (ACPI NVS)
[ 0.000000] modified: 0000000027ffb000 - 0000000030000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec02000 (reserved)
[ 0.000000] modified: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 27fd0000 @ 10000-17000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] RAMDISK: 277b5000 - 27fc52ba
[ 0.000000] ACPI: RSDP 000FE270, 0014 (r0 HP )
[ 0.000000] ACPI: RSDT 27FEFC84, 0034 (r1 HP 0944 29080620 HP 1)
[ 0.000000] ACPI: FACP 27FEFC00, 0084 (r2 HP 0944 2 HP 1)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] FADT: X_PM1b_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 27FEFD50, 7515 (r1 HP SB400 10000 MSFT 100000E)
[ 0.000000] ACPI: FACS 27FFAE80, 0040
[ 0.000000] ACPI: APIC 27FEFCB8, 005A (r1 HP 0944 1 HP 1)
[ 0.000000] ACPI: MCFG 27FEFD14, 003C (r1 HP 0944 1 HP 1)
[ 0.000000] ACPI: SSDT 27FF7265, 0382 (r1 HP HPQPpc 1001 MSFT 100000E)
[ 0.000000] ACPI: Local APIC address 0xfec01000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 639MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 27fd0000
[ 0.000000] low ram: 00000000 - 27fd0000
[ 0.000000] bootmap 00013000 - 00017ffc
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0027fd0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a1834] TEXT DATA BSS ==> [0000100000 - 00008a1834]
[ 0.000000] #4 [00277b5000 - 0027fc52ba] RAMDISK ==> [00277b5000 - 0027fc52ba]
[ 0.000000] #5 [00008a2000 - 00008ab000] INIT_PG_TABLE ==> [00008a2000 - 00008ab000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #8 [0000013000 - 0000018000] BOOTMAP ==> [0000013000 - 0000018000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00027fd0
[ 0.000000] HighMem 0x00027fd0 -> 0x00027fd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x00027fd0
[ 0.000000] On node 0 totalpages: 163668
[ 0.000000] free_area_init_node: node 0, pgdat c077fdc0, node_mem_map c1000020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3940 pages, LIFO batch:0
[ 0.000000] Normal zone: 1248 pages used for memmap
[ 0.000000] Normal zone: 158448 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SB4X0 revision 0x11
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfec01000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:b0000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages at c1504000, static data 25692 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 162388
[ 0.000000] Kernel command line: root=UUID=25e32297-054a-47ad-8548-dd3013c9e806 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 797.883 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 3275820 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Memory: 629052k/655168k available (4568k kernel code, 25392k reserved, 2170k data, 508k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc78000 - 0xfffff000 (3612 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffa00000 (2048 kB)
[ 0.004000] vmalloc : 0xe87d0000 - 0xff7fe000 ( 368 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xe7fd0000 ( 639 MB)
[ 0.004000] .init : 0xc079d000 - 0xc081c000 ( 508 kB)
[ 0.004000] .data : 0xc0576253 - 0xc0794c08 (2170 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0576253 (4568 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 1595.76 BogoMIPS (lpj=3191532)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017068] SMP alternatives: switching to UP code
[ 0.320808] Freeing SMP alternatives: 19k freed
[ 0.320839] ACPI: Core revision 20081204
[ 0.338485] alloc irq_desc for 21 on cpu 0 node 0
[ 0.338490] alloc kstat_irqs on cpu 0 node 0
[ 0.338641] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.378329] CPU0: AMD Turion(tm) 64 Mobile ML-40 stepping 02
[ 0.380001] Brought up 1 CPUs
[ 0.380001] Total of 1 processors activated (1595.76 BogoMIPS).
[ 0.380001] CPU0 attaching NULL sched-domain.
[ 0.380001] net_namespace: 1008 bytes
[ 0.380001] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.380001] Booting paravirtualized kernel on bare hardware
[ 0.380001] regulator: core version 0.5
[ 0.380001] Time: 18:12:51 Date: 05/17/09
[ 0.380001] NET: Registered protocol family 16
[ 0.380001] EISA bus registered
[ 0.380001] ACPI: bus type pci registered
[ 0.380001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.380001] PCI: MCFG area at e0000000 reserved in E820
[ 0.380001] PCI: Using MMCONFIG for extended config space
[ 0.380001] PCI: Using configuration type 1 for base access
[ 0.380057] bio: create slab <bio-0> at 0
[ 0.381737] ACPI: EC: Look up EC in DSDT
[ 0.405455] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.428378] ACPI: Interpreter enabled
[ 0.428391] ACPI: (supports S0 S3 S4 S5)
[ 0.428434] ACPI: Using IOAPIC for interrupt routing
[ 0.449800] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.449806] ACPI: EC: driver started in interrupt mode
[ 0.450237] ACPI: No dock devices found.
[ 0.450259] ACPI: PCI Root Bridge [C047] (0000:00)
[ 0.450478] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.450485] pci 0000:00:04.0: PME# disabled
[ 0.450551] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.450557] pci 0000:00:05.0: PME# disabled
[ 0.450661] pci 0000:00:13.0: reg 10 32bit mmio: [0xd8400000-0xd8400fff]
[ 0.450809] pci 0000:00:13.1: reg 10 32bit mmio: [0xd8401000-0xd8401fff]
[ 0.450965] pci 0000:00:13.2: reg 10 32bit mmio: [0xd8402000-0xd8402fff]
[ 0.451062] pci 0000:00:13.2: supports D1 D2
[ 0.451067] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.451077] pci 0000:00:13.2: PME# disabled
[ 0.451155] pci 0000:00:14.0: reg 10 io port: [0x8200-0x820f]
[ 0.451170] pci 0000:00:14.0: reg 14 32bit mmio: [0xd8403000-0xd84033ff]
[ 0.451220] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.451307] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.451321] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.451334] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.451347] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.451363] pci 0000:00:14.1: reg 20 io port: [0x7010-0x701f]
[ 0.451614] pci 0000:00:14.5: reg 10 32bit mmio: [0xd8404000-0xd84040ff]
[ 0.451753] pci 0000:00:14.6: reg 10 32bit mmio: [0xd8405000-0xd84050ff]
[ 0.452051] pci 0000:01:05.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]
[ 0.452061] pci 0000:01:05.0: reg 14 io port: [0x6000-0x60ff]
[ 0.452070] pci 0000:01:05.0: reg 18 32bit mmio: [0xd8300000-0xd830ffff]
[ 0.452091] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.452110] pci 0000:01:05.0: supports D1 D2
[ 0.452144] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
[ 0.452153] pci 0000:00:01.0: bridge 32bit mmio: [0xd8300000-0xd83fffff]
[ 0.452163] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.452247] pci 0000:00:04.0: bridge io port: [0x4000-0x5fff]
[ 0.452255] pci 0000:00:04.0: bridge 32bit mmio: [0xd4000000-0xd7ffffff]
[ 0.452336] pci 0000:00:05.0: bridge io port: [0x2000-0x3fff]
[ 0.452343] pci 0000:00:05.0: bridge 32bit mmio: [0xd0000000-0xd3ffffff]
[ 0.452453] pci 0000:02:01.0: reg 10 32bit mmio: [0xd8000000-0xd800ffff]
[ 0.452523] pci 0000:02:01.0: reg 30 32bit mmio: [0xfd7f0000-0xfd7fffff]
[ 0.452588] pci 0000:02:01.0: PME# supported from D3hot D3cold
[ 0.452598] pci 0000:02:01.0: PME# disabled
[ 0.452651] pci 0000:02:02.0: reg 10 32bit mmio: [0xd8010000-0xd8011fff]
[ 0.452792] pci 0000:02:04.0: reg 10 32bit mmio: [0xd8012000-0xd8012fff]
[ 0.452834] pci 0000:02:04.0: supports D1 D2
[ 0.452839] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.452849] pci 0000:02:04.0: PME# disabled
[ 0.452926] pci 0000:02:04.2: reg 10 32bit mmio: [0xd8013000-0xd80137ff]
[ 0.452942] pci 0000:02:04.2: reg 14 32bit mmio: [0xd8014000-0xd8017fff]
[ 0.453040] pci 0000:02:04.2: supports D1 D2
[ 0.453045] pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.453056] pci 0000:02:04.2: PME# disabled
[ 0.453129] pci 0000:02:04.3: reg 10 32bit mmio: [0xd8018000-0xd8019fff]
[ 0.453230] pci 0000:02:04.3: supports D1 D2
[ 0.453235] pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.453245] pci 0000:02:04.3: PME# disabled
[ 0.453322] pci 0000:02:04.4: reg 10 32bit mmio: [0xd801a000-0xd801a0ff]
[ 0.453338] pci 0000:02:04.4: reg 14 32bit mmio: [0xd801b000-0xd801b0ff]
[ 0.453355] pci 0000:02:04.4: reg 18 32bit mmio: [0xd801c000-0xd801c0ff]
[ 0.453438] pci 0000:02:04.4: supports D1 D2
[ 0.453443] pci 0000:02:04.4: PME# supported from D0 D1 D2 D3hot
[ 0.453452] pci 0000:02:04.4: PME# disabled
[ 0.453544] pci 0000:00:14.4: transparent bridge
[ 0.453557] pci 0000:00:14.4: bridge io port: [0x1000-0x1fff]
[ 0.453567] pci 0000:00:14.4: bridge 32bit mmio: [0xd8000000-0xd82fffff]
[ 0.453578] pci 0000:00:14.4: bridge 32bit mmio pref: [0x40000000-0x43ffffff]
[ 0.453639] pci_bus 0000:00: on NUMA node 0
[ 0.453651] ACPI: PCI Interrupt Routing Table [\_SB_.C047._PRT]
[ 0.453999] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C048._PRT]
[ 0.454140] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C0AB._PRT]
[ 0.492193] ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled.
[ 0.492570] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled.
[ 0.492942] ACPI: PCI Interrupt Link [C0F2] (IRQs 10 11) *0, disabled.
[ 0.493310] ACPI: PCI Interrupt Link [C0F3] (IRQs 10 11) *0, disabled.
[ 0.493679] ACPI: PCI Interrupt Link [C0F4] (IRQs 10 11) *0, disabled.
[ 0.494051] ACPI: PCI Interrupt Link [C0F5] (IRQs 9) *0, disabled.
[ 0.494420] ACPI: PCI Interrupt Link [C0F6] (IRQs 10 11) *0, disabled.
[ 0.494786] ACPI: PCI Interrupt Link [C0F7] (IRQs 10 11) *0, disabled.
[ 0.495066] ACPI: Power Resource [C1D3] (off)
[ 0.495482] ACPI: Power Resource [C1BB] (on)
[ 0.495591] ACPI: Power Resource [C1CB] (on)
[ 0.495841] ACPI: Power Resource [C252] (off)
[ 0.496081] ACPI: Power Resource [C253] (off)
[ 0.496313] ACPI: Power Resource [C254] (off)
[ 0.496542] ACPI: Power Resource [C255] (off)
[ 0.496919] SCSI subsystem initialized
[ 0.503500] libata version 3.00 loaded.
[ 0.503814] usbcore: registered new interface driver usbfs
[ 0.503862] usbcore: registered new interface driver hub
[ 0.503918] usbcore: registered new device driver usb
[ 0.504314] ACPI: WMI: Mapper loaded
[ 0.504319] PCI: Using ACPI for IRQ routing
[ 0.504659] Bluetooth: Core ver 2.15
[ 0.504749] NET: Registered protocol family 31
[ 0.504753] Bluetooth: HCI device and connection manager initialized
[ 0.504761] Bluetooth: HCI socket layer initialized
[ 0.504766] NET: Registered protocol family 8
[ 0.504770] NET: Registered protocol family 20
[ 0.504794] NetLabel: Initializing
[ 0.504798] NetLabel: domain hash size = 128
[ 0.504801] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.504832] NetLabel: unlabeled traffic allowed by default
[ 0.504955] pnp: PnP ACPI init
[ 0.504972] ACPI: bus type pnp registered
[ 0.527612] pnp: PnP ACPI: found 12 devices
[ 0.527617] ACPI: ACPI bus type pnp unregistered
[ 0.527626] PnPBIOS: Disabled by ACPI PNP
[ 0.527645] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.527652] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.527660] system 00:00: iomem range 0x100000-0x27ffffff could not be reserved
[ 0.527678] system 00:09: ioport range 0x40b-0x40b has been reserved
[ 0.527685] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.527692] system 00:09: ioport range 0x4d6-0x4d6 has been reserved
[ 0.527699] system 00:09: ioport range 0x500-0x53f has been reserved
[ 0.527706] system 00:09: ioport range 0xc00-0xc01 has been reserved
[ 0.527713] system 00:09: ioport range 0xc14-0xc14 has been reserved
[ 0.527721] system 00:09: ioport range 0xc50-0xc51 has been reserved
[ 0.527728] system 00:09: ioport range 0xc52-0xc52 has been reserved
[ 0.527735] system 00:09: ioport range 0xc6c-0xc6c has been reserved
[ 0.527743] system 00:09: ioport range 0xc6f-0xc6f has been reserved
[ 0.527760] system 00:09: ioport range 0xcd4-0xcdf has been reserved
[ 0.527769] system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.527776] system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.527789] system 00:0a: ioport range 0x8000-0x802f has been reserved
[ 0.527796] system 00:0a: ioport range 0x8100-0x811f has been reserved
[ 0.527804] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.527811] system 00:0a: iomem range 0xfec00000-0xfec000ff has been reserved
[ 0.527824] system 00:0b: iomem range 0xcf000-0xcffff has been reserved
[ 0.527831] system 00:0b: iomem range 0x28000000-0x2fffffff has been reserved
[ 0.527838] system 00:0b: iomem range 0xfec01000-0xfec01fff has been reserved
[ 0.562721] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.562728] pci 0000:00:01.0: IO window: 0x6000-0x6fff
[ 0.562737] pci 0000:00:01.0: MEM window: 0xd8300000-0xd83fffff
[ 0.562745] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.562755] pci 0000:00:04.0: PCI bridge, secondary bus 0000:10
[ 0.562762] pci 0000:00:04.0: IO window: 0x4000-0x5fff
[ 0.562772] pci 0000:00:04.0: MEM window: 0xd4000000-0xd7ffffff
[ 0.562779] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.562788] pci 0000:00:05.0: PCI bridge, secondary bus 0000:20
[ 0.562795] pci 0000:00:05.0: IO window: 0x2000-0x3fff
[ 0.562803] pci 0000:00:05.0: MEM window: 0xd0000000-0xd3ffffff
[ 0.562810] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.562826] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
[ 0.562832] pci 0000:02:04.0: IO window: 0x001000-0x0010ff
[ 0.562842] pci 0000:02:04.0: IO window: 0x001400-0x0014ff
[ 0.562853] pci 0000:02:04.0: PREFETCH window: 0x40000000-0x43ffffff
[ 0.562864] pci 0000:02:04.0: MEM window: 0x44000000-0x47ffffff
[ 0.562875] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[ 0.562882] pci 0000:00:14.4: IO window: 0x1000-0x1fff
[ 0.562895] pci 0000:00:14.4: MEM window: 0xd8000000-0xd82fffff
[ 0.562905] pci 0000:00:14.4: PREFETCH window: 0x00000040000000-0x00000043ffffff
[ 0.562934] pci 0000:00:04.0: setting latency timer to 64
[ 0.562948] pci 0000:00:05.0: setting latency timer to 64
[ 0.562975] alloc irq_desc for 20 on cpu 0 node 0
[ 0.562979] alloc kstat_irqs on cpu 0 node 0
[ 0.562991] pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.563005] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.563011] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.563018] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff]
[ 0.563023] pci_bus 0000:01: resource 1 mem: [0xd8300000-0xd83fffff]
[ 0.563030] pci_bus 0000:01: resource 2 mem: [0xc0000000-0xcfffffff]
[ 0.563035] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.563041] pci_bus 0000:10: resource 0 io: [0x4000-0x5fff]
[ 0.563047] pci_bus 0000:10: resource 1 mem: [0xd4000000-0xd7ffffff]
[ 0.563053] pci_bus 0000:10: resource 2 mem: [0x0-0x0]
[ 0.563058] pci_bus 0000:10: resource 3 mem: [0x0-0x0]
[ 0.563064] pci_bus 0000:20: resource 0 io: [0x2000-0x3fff]
[ 0.563069] pci_bus 0000:20: resource 1 mem: [0xd0000000-0xd3ffffff]
[ 0.563075] pci_bus 0000:20: resource 2 mem: [0x0-0x0]
[ 0.563080] pci_bus 0000:20: resource 3 mem: [0x0-0x0]
[ 0.563086] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.563092] pci_bus 0000:02: resource 1 mem: [0xd8000000-0xd82fffff]
[ 0.563098] pci_bus 0000:02: resource 2 mem: [0x40000000-0x43ffffff]
[ 0.563103] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.563109] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.563116] pci_bus 0000:03: resource 0 io: [0x1000-0x10ff]
[ 0.563121] pci_bus 0000:03: resource 1 io: [0x1400-0x14ff]
[ 0.563127] pci_bus 0000:03: resource 2 mem: [0x40000000-0x43ffffff]
[ 0.563133] pci_bus 0000:03: resource 3 mem: [0x44000000-0x47ffffff]
[ 0.563204] NET: Registered protocol family 2
[ 0.563404] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.564245] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.565616] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.566430] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.566438] TCP reno registered
[ 0.566634] NET: Registered protocol family 1
[ 0.566785] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 1.217454] it is
[ 1.217602] Freeing initrd memory: 8256k freed
[ 1.230739] cpufreq-nforce2: No nForce2 chipset.
[ 1.230833] Scanning for low memory corruption every 60 seconds
[ 1.231068] audit: initializing netlink socket (disabled)
[ 1.231094] type=2000 audit(1242583971.228:1): initialized
[ 1.256106] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.261454] VFS: Disk quotas dquot_6.5.2
[ 1.261611] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.262971] fuse init (API version 7.11)
[ 1.263174] msgmni has been set to 1245
[ 1.263573] alg: No test for stdrng (krng)
[ 1.263600] io scheduler noop registered
[ 1.263604] io scheduler anticipatory registered
[ 1.263609] io scheduler deadline registered
[ 1.263646] io scheduler cfq registered (default)
[ 1.263662] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 1.263798] pci 0000:01:05.0: Boot video device
[ 1.263987] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.264179] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 1.264390] aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.264408] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.264433] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.264772] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.268668] ACPI: AC Adapter [C17A] (on-line)
[ 1.316067] ACPI: Battery Slot [C17C] (battery present)
[ 1.316597] ACPI: Battery Slot [C17B] (battery absent)
[ 1.316768] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.316775] ACPI: Power Button (FF) [PWRF]
[ 1.316905] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.316911] ACPI: Sleep Button (CM) [C1F4]
[ 1.317007] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.317160] ACPI: Lid Switch [C1F5]
[ 1.317729] fan PNP0C0B:00: registered as cooling_device0
[ 1.317742] ACPI: Fan [C256] (off)
[ 1.318217] fan PNP0C0B:01: registered as cooling_device1
[ 1.318229] ACPI: Fan [C257] (off)
[ 1.318712] fan PNP0C0B:02: registered as cooling_device2
[ 1.318724] ACPI: Fan [C258] (off)
[ 1.319201] fan PNP0C0B:03: registered as cooling_device3
[ 1.319213] ACPI: Fan [C259] (off)
[ 1.319847] ACPI: CPU0 (power states: C1[C1] C3[C3])
[ 1.319888] processor ACPI_CPU:00: registered as cooling_device4
[ 1.319896] ACPI: Processor [C000] (supports 8 throttling states)
[ 1.346069] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.349654] ACPI: Thermal Zone [TZ1] (51 C)
[ 1.354460] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.357258] ACPI: Thermal Zone [TZ2] (52 C)
[ 1.363020] thermal LNXTHERM:03: registered as thermal_zone2
[ 1.370900] ACPI: Thermal Zone [TZ3] (30 C)
[ 1.372713] thermal LNXTHERM:04: registered as thermal_zone3
[ 1.376534] ACPI: Thermal Zone [TZ4] (50 C)
[ 1.376659] isapnp: Scanning for PnP cards...
[ 1.731587] isapnp: No Plug & Play device found
[ 1.734155] Linux agpgart interface v0.103
[ 1.734194] [drm] Initialized drm 1.1.0 20060810
[ 1.734199] [drm] radeon default to kernel modesetting.
[ 1.734203] [drm] radeon kernel modesetting enabled.
[ 1.734322] alloc irq_desc for 17 on cpu 0 node 0
[ 1.734327] alloc kstat_irqs on cpu 0 node 0
[ 1.734341] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.738439] [drm] radeon: Initializing kernel modesetting.
[ 1.738493] [drm] register mmio base: 0xD8300000
[ 1.738497] [drm] register mmio size: 65536
[ 1.738937] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 1.738945] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
[ 1.739024] [drm] Detected VRAM RAM=128M, BAR=128M
[ 1.739028] [drm] RAM width 128bits DDR
[ 1.739032] [drm] radeon: VRAM 128M
[ 1.739036] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 1.739041] [drm] radeon: GTT 32M
[ 1.739045] [drm] radeon: GTT from 0x08000000 to 0x09FFFFFF
[ 1.739050] [drm] GART: num cpu pages 8192, num gpu pages 8192
[ 1.739224] [drm] Clocks initialized !
[ 1.739266] [drm] radeon: irq initialized.
[ 1.745328] TTM available graphics memory: 311 MiB
[ 1.745335] TTM available object memory: 311 MiB
[ 1.745364] [drm] radeon: 128M of VRAM memory ready
[ 1.745369] [drm] radeon: 32M of GTT memory ready.
[ 1.745607] [drm] radeon: 4 pipes initialized.
[ 1.857160] Failed to wait MC idle while programming pipes. Bad things might happen.
[ 1.968865] Failed to wait MC idle while programming pipes. Bad things might happen.
[ 1.968886] [drm] radeon: cp idle (0x13018060)
[ 1.968892] [drm] Loading R300 Microcode
[ 1.969176] [drm] radeon: ring at 0x0000000008000000
[ 1.969201] [drm] ring test succeeded in 3 usecs
[ 1.969447] [drm] radeon: ib pool ready.
[ 1.969586] [drm] ib test succeeded in 0 usecs
[ 1.969624] [drm] Default TV standard: NTSC
[ 1.969628] [drm] 14.318180000 MHz TV ref clk
[ 1.969759] [drm] Panel ID String: AUO
[ 1.969764] [drm] Panel Size 1400x1050
[ 2.065903] i2c-adapter i2c-0: unable to read EDID block.
[ 2.120016] radeon 0000:01:05.0: VGA-1: no EDID data
[ 2.528715] [drm] fb mappable at 0xE8C80000
[ 2.528720] [drm] vram apper at 0xC0000000
[ 2.528724] [drm] size 5913600
[ 2.528727] [drm] fb depth is 24
[ 2.528731] [drm] pitch is 5632
[ 2.528826] fbcon: radeondrmfb (fb0) is primary device
[ 2.539894] [drm] LVDS-7: set mode 1400x1050 c
[ 2.571944] Console: switching to colour frame buffer device 175x65
[ 2.593030] fb0: radeondrmfb frame buffer device
[ 2.593035] registered panic notifier
[ 2.593040] [drm] radeon: kernel modesetting successfully initialized.
[ 2.593048] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 2.593126] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.593814] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.593827] serial 0000:00:14.6: PCI INT B disabled
[ 2.595518] brd: module loaded
[ 2.596308] loop: module loaded
[ 2.596505] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 2.596584] Driver 'sd' needs updating - please use bus_type methods
[ 2.596608] Driver 'sr' needs updating - please use bus_type methods
[ 2.597249] alloc irq_desc for 16 on cpu 0 node 0
[ 2.597254] alloc kstat_irqs on cpu 0 node 0
[ 2.597268] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.604169] scsi0 : pata_atiixp
[ 2.604514] scsi1 : pata_atiixp
[ 2.606475] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x7010 irq 14
[ 2.606483] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x7018 irq 15
[ 2.607510] Fixed MDIO Bus: probed
[ 2.607523] PPP generic driver version 2.4.2
[ 2.607750] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.607791] alloc irq_desc for 19 on cpu 0 node 0
[ 2.607797] alloc kstat_irqs on cpu 0 node 0
[ 2.607809] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.607851] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.607993] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 2.608169] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd8402000
[ 2.620020] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.620225] usb usb1: configuration #1 chosen from 1 choice
[ 2.620289] hub 1-0:1.0: USB hub found
[ 2.620307] hub 1-0:1.0: 8 ports detected
[ 2.620567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.620605] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.620640] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.620738] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.620768] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd8400000
[ 2.680137] usb usb2: configuration #1 chosen from 1 choice
[ 2.680204] hub 2-0:1.0: USB hub found
[ 2.680222] hub 2-0:1.0: 4 ports detected
[ 2.680401] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.680427] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.680526] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 2.680551] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd8401000
[ 2.740135] usb usb3: configuration #1 chosen from 1 choice
[ 2.740195] hub 3-0:1.0: USB hub found
[ 2.740213] hub 3-0:1.0: 4 ports detected
[ 2.740403] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.740551] usbcore: registered new interface driver libusual
[ 2.740624] usbcore: registered new interface driver usbserial
[ 2.740650] USB Serial support registered for generic
[ 2.740683] usbcore: registered new interface driver usbserial_generic
[ 2.740688] usbserial: USB Serial Driver core
[ 2.740786] PNP: PS/2 Controller [PNP0303:C1C8,PNP0f13:C1C9] at 0x60,0x64 irq 1,12
[ 2.742767] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.743449] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.743461] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.743468] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.743475] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.743482] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.743614] mice: PS/2 mouse device common for all mice
[ 2.743869] rtc_cmos 00:06: RTC can wake from S4
[ 2.743944] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.743987] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 2.744228] device-mapper: uevent: version 1.0.3
[ 2.744473] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.744592] device-mapper: multipath: version 1.0.5 loaded
[ 2.744598] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.744763] EISA: Probing bus 0 at eisa.0
[ 2.744777] Cannot allocate resource for EISA slot 1
[ 2.744783] Cannot allocate resource for EISA slot 2
[ 2.744788] Cannot allocate resource for EISA slot 3
[ 2.744793] Cannot allocate resource for EISA slot 4
[ 2.744798] Cannot allocate resource for EISA slot 5
[ 2.744804] Cannot allocate resource for EISA slot 6
[ 2.744809] Cannot allocate resource for EISA slot 7
[ 2.744814] Cannot allocate resource for EISA slot 8
[ 2.744818] EISA: Detected 0 cards.
[ 2.745760] cpuidle: using governor ladder
[ 2.745883] cpuidle: using governor menu
[ 2.749057] TCP cubic registered
[ 2.749427] NET: Registered protocol family 10
[ 2.750460] lo: Disabled Privacy Extensions
[ 2.751255] NET: Registered protocol family 17
[ 2.751295] Bluetooth: L2CAP ver 2.13
[ 2.751299] Bluetooth: L2CAP socket layer initialized
[ 2.751305] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.751309] Bluetooth: SCO socket layer initialized
[ 2.751377] Bluetooth: RFCOMM socket layer initialized
[ 2.751392] Bluetooth: RFCOMM TTY layer initialized
[ 2.751396] Bluetooth: RFCOMM ver 1.11
[ 2.751446] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile ML-40 processors (1 cpu cores) (version 2.20.00)
[ 2.760351] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x4
[ 2.760358] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6
[ 2.760364] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8
[ 2.760369] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0xa
[ 2.760375] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x16
[ 2.760430] Marking TSC unstable due to cpufreq changes
[ 2.766223] Using IPI No-Shortcut mode
[ 2.766312] registered taskstats version 1
[ 2.766448] Magic number: 9:348:241
[ 2.766629] rtc_cmos 00:06: setting system clock to 2009-05-17 18:12:53 UTC (1242583973)
[ 2.766632] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.766633] EDD information not available.
[ 2.788255] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.940711] ata2.00: ATAPI: MATSHITAUJ-840D, 1.02, max MWDMA2
[ 2.956668] ata2.00: configured for MWDMA2
[ 2.958936] scsi 1:0:0:0: CD-ROM MATSHITA UJ-840D 1.02 PQ: 0 ANSI: 5
[ 2.963387] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.963390] Uniform CD-ROM driver Revision: 3.20
[ 2.963475] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.963525] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.963544] Freeing unused kernel memory: 508k freed
[ 3.060016] Clocksource tsc unstable (delta = 514735483 ns)
[ 3.212069] usb 1-6: new high speed USB device using ehci_hcd and address 5
[ 4.773170] usb 1-6: configuration #1 chosen from 1 choice
[ 4.800075] Initializing USB Mass Storage driver...
[ 4.800161] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4.800290] usbcore: registered new interface driver usb-storage
[ 4.800294] USB Mass Storage support registered.
[ 4.800368] usb-storage: device found at 5
[ 4.800370] usb-storage: waiting for device to settle before scanning
[ 5.140061] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 5.354194] usb 2-2: configuration #1 chosen from 1 choice
[ 5.660062] usb 2-3: new low speed USB device using ohci_hcd and address 3
[ 5.870192] usb 2-3: configuration #1 chosen from 1 choice
[ 6.176062] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 6.381182] usb 3-1: configuration #1 chosen from 1 choice
[ 6.684061] usb 3-4: new low speed USB device using ohci_hcd and address 3
[ 6.896175] usb 3-4: configuration #1 chosen from 1 choice
[ 8.487078] alloc irq_desc for 22 on cpu 0 node 0
[ 8.487082] alloc kstat_irqs on cpu 0 node 0
[ 8.487090] b43-pci-bridge 0000:02:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.494518] usbcore: registered new interface driver hiddev
[ 8.500378] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-4/3-4:1.0/input/input5
[ 8.500460] generic-usb 0003:0D62:001C.0003: input,hidraw0: USB HID v1.00 Keyboard [Darfon USB Combo Keyboard] on usb-0000:00:13.1-4/input0
[ 8.514151] input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-4/3-4:1.1/input/input6
[ 8.514263] generic-usb 0003:0D62:001C.0004: input,hiddev96,hidraw1: USB HID v1.00 Device [Darfon USB Combo Keyboard] on usb-0000:00:13.1-4/input1
[ 8.514284] usbcore: registered new interface driver usbhid
[ 8.514288] usbhid: v2.6:USB HID core driver
[ 8.544145] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[ 8.544452] tg3.c:v3.98 (February 25, 2009)
[ 8.544477] alloc irq_desc for 23 on cpu 0 node 0
[ 8.544479] alloc kstat_irqs on cpu 0 node 0
[ 8.544486] tg3 0000:02:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.552208] tg3 0000:02:01.0: PME# disabled
[ 8.586250] eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:0f:b0:fa:96:bb
[ 8.586254] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
[ 8.586256] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 8.586258] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[ 8.586311] ohci1394 0000:02:04.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 8.640100] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d8013000-d80137ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 8.846441] input: Microsoft Microsoft Wireless Optical Desktop 2.10 as /devices/pci0000:00/0000:00:13.0/usb2/2-3/2-3:1.0/input/input7
[ 8.846531] microsoft 0003:045E:009D.0001: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop 2.10] on usb-0000:00:13.0-3/input0
[ 8.878321] input: Microsoft Microsoft Wireless Optical Desktop 2.10 as /devices/pci0000:00/0000:00:13.0/usb2/2-3/2-3:1.1/input/input8
[ 8.878430] microsoft 0003:045E:009D.0002: input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop 2.10] on usb-0000:00:13.0-3/input1
[ 9.800270] usb-storage: device scan complete
[ 9.912201] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929c9170c]
[ 11.414505] scsi 2:0:0:0: Direct-Access StoreJet TS80GSJ25S PQ: 0 ANSI: 2
[ 11.414895] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 11.420920] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 11.421458] sd 2:0:0:0: [sda] Write Protect is off
[ 11.421460] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 11.421463] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 11.422951] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 11.422956] sda: sda1 sda2 sda3 sda4
[ 13.385866] sd 2:0:0:0: [sda] Attached SCSI disk
[ 14.574013] PM: Starting manual resume from disk
[ 14.574017] PM: Resume from partition 8:2
[ 14.574019] PM: Checking hibernation image.
[ 14.574838] PM: Resume from disk failed.
[ 14.577914] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[ 14.577918] PM: Marking nosave pages: 0000000000007000 - 0000000000010000
[ 14.577920] PM: Marking nosave pages: 0000000000092000 - 0000000000100000
[ 14.577929] PM: Basic memory bitmaps created
[ 14.586436] PM: Basic memory bitmaps freed
[ 14.607554] EXT4-fs: INFO: recovery required on readonly filesystem.
[ 14.607559] EXT4-fs: write access will be enabled during recovery.
[ 14.626000] EXT4-fs: barriers enabled
[ 20.918979] kjournald2 starting: pid 2404, dev sda1:8, commit interval 5 seconds
[ 20.919000] EXT4-fs: delayed allocation enabled
[ 20.919002] EXT4-fs: file extents enabled
[ 20.919692] EXT4-fs: mballoc enabled
[ 20.919694] EXT4-fs: recovery complete.
[ 20.921304] EXT4-fs: mounted filesystem sda1 with ordered data mode
[ 30.625109] udev: starting version 141
[ 30.817943] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 30.864325] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input9
[ 30.864381] ACPI: Video Device [C049] (multi-head: yes rom: no post: no)
[ 30.927690] parport_pc 00:02: reported by Plug and Play ACPI
[ 30.927784] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 31.002971] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 31.003075] usbcore: registered new interface driver btusb
[ 31.109676] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8200, revision 0
[ 31.256537] sdhci: Secure Digital Host Controller Interface driver
[ 31.256540] sdhci: Copyright(c) Pierre Ossman
[ 31.371367] sdhci-pci 0000:02:04.4: SDHCI controller found [104c:8034] (rev 0)
[ 31.371391] sdhci-pci 0000:02:04.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 31.371507] Registered led device: mmc0::
[ 31.371545] mmc0: SDHCI controller on PCI [0000:02:04.4] using PIO
[ 31.371579] Registered led device: mmc1::
[ 31.371604] mmc1: SDHCI controller on PCI [0000:02:04.4] using PIO
[ 31.371636] Registered led device: mmc2::
[ 31.371660] mmc2: SDHCI controller on PCI [0000:02:04.4] using PIO
[ 31.516648] tifm_7xx1 0000:02:04.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 31.743109] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 32.042218] cfg80211: Calling CRDA to update world regulatory domain
[ 32.070231] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:308b]
[ 32.070262] yenta_cardbus 0000:02:04.0: Using INTVAL to route CSC interrupts to PCI
[ 32.070265] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 32.070273] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01a11b22, devctl 0x64
[ 32.111412] cfg80211: World regulatory domain updated:
[ 32.111416] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 32.111419] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.111421] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 32.111424] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 32.111426] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.111428] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.165611] ppdev: user-space parallel port driver
[ 32.304493] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0e78, PCI irq 20
[ 32.304499] yenta_cardbus 0000:02:04.0: Socket status: 30000086
[ 32.304507] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
[ 32.304510] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x1000-0x1fff: clean.
[ 32.304789] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xd82fffff
[ 32.304792] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[ 32.305589] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 32.380588] phy0: Selected rate control algorithm 'minstrel'
[ 32.408180] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 32.520600] MC'97 0 converters and GPIO not ready (0x1)
[ 32.521713] ACPI: Transitioning device [C0AC] to D0
[ 32.521724] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 32.533001] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 32.633171] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 32.673003] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 32.807465] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 32.810281] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 32.811429] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 32.812412] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 32.813404] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 32.938657] lp0: using parport0 (interrupt-driven).
[ 33.449079] Adding 2072376k swap on /dev/sda2. Priority:-1 extents:1 across:2072376k
[ 33.734544] EXT4 FS on sda1, internal journal on sda1:8
[ 34.652060] EXT4-fs: barriers enabled
[ 34.671077] kjournald2 starting: pid 3786, dev sda3:8, commit interval 5 seconds
[ 34.672776] EXT4 FS on sda3, internal journal on sda3:8
[ 34.672778] EXT4-fs: delayed allocation enabled
[ 34.672780] EXT4-fs: file extents enabled
[ 34.677085] EXT4-fs: mballoc enabled
[ 34.677087] EXT4-fs: mounted filesystem sda3 with ordered data mode
[ 45.560461] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 45.560464] vboxdrv: Successfully done.
[ 45.560467] vboxdrv: Found 1 processor cores.
[ 45.560600] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 45.560602] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[ 48.611665] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 48.611668] Bluetooth: BNEP filters: protocol multicast
[ 48.658030] Bridge firewalling registered
[ 53.266694] tg3 0000:02:01.0: firmware: requesting tigon/tg3_tso5.bin
[ 53.555004] tg3 0000:02:01.0: PME# disabled
[ 54.092814] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 54.148711] input: b43-phy0 as /devices/virtual/input/input12
[ 54.192070] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 54.330596] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 54.334715] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 54.377244] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 54.576040] b43-phy0: Loading OpenSource firmware version 410.31754 (Hardware crypto not supported)
[ 54.616487] Registered led device: b43-phy0::radio
[ 54.616687] b43-phy0: Radio turned on by software
[ 54.619932] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 55.404378] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 55.404381] tg3: eth0: Flow control is on for TX and on for RX.
[ 55.404827] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 90.047930] warning: `pulseaudio' uses 32-bit capabilities (legacy support in use)
[ 1831.680280] Forbidden register 0x4010 in cs at 3
[ 1831.680289] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1867.503056] Forbidden register 0x4010 in cs at 3
[ 1867.503062] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1867.514444] Forbidden register 0x4010 in cs at 3
[ 1867.514449] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1867.592363] Forbidden register 0x4010 in cs at 3
[ 1867.592369] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1867.626164] Forbidden register 0x4010 in cs at 3
[ 1867.626169] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1868.433347] Forbidden register 0x4010 in cs at 3
[ 1868.433352] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1868.448473] Forbidden register 0x4010 in cs at 3
[ 1868.448479] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1868.481343] Forbidden register 0x4010 in cs at 3
[ 1868.481347] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1868.483276] Forbidden register 0x4010 in cs at 3
[ 1868.483279] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1869.381083] Forbidden register 0x4010 in cs at 3
[ 1869.381090] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1869.383497] Forbidden register 0x4010 in cs at 3
[ 1869.383499] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1869.389338] Forbidden register 0x4010 in cs at 3
[ 1869.389345] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1869.391762] Forbidden register 0x4010 in cs at 3
[ 1869.391764] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1913.488190] Forbidden register 0x4010 in cs at 3
[ 1913.488195] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1913.491116] Forbidden register 0x4010 in cs at 3
[ 1913.491120] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1913.497276] Forbidden register 0x4010 in cs at 3
[ 1913.497281] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1913.499877] Forbidden register 0x4010 in cs at 3
[ 1913.499879] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1922.118394] Forbidden register 0x4010 in cs at 3
[ 1922.118400] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1922.121797] Forbidden register 0x4010 in cs at 3
[ 1922.121801] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1922.128239] Forbidden register 0x4010 in cs at 3
[ 1922.128246] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1922.130808] Forbidden register 0x4010 in cs at 3
[ 1922.130810] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 2028.954579] Forbidden register 0x4010 in cs at 3
[ 2028.954588] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 2083.488513] Forbidden register 0x4010 in cs at 3
[ 2083.488523] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 2092.763384] Forbidden register 0x4010 in cs at 3
[ 2092.763393] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 2099.641570] Forbidden register 0x4010 in cs at 3
[ 2099.641581] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !