rendered paste body[ 0.000000] BIOS EBDA/lowmem at: 0009b400/0009b400
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-gentoo-r5 (root@livecd) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Tue Apr 28 01:11:52 CEST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
[ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7fed0 max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] ACPI: RSDP 000F7120, 0024 (r2 TOSCPL)
[ 0.000000] ACPI: XSDT 7FED7ABF, 0094 (r1 TOSCPL TOSCPL00 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7FEDFB60, 00F4 (r3 TOSCPL CRESTLNE 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 7FED8E1A, 6CD2 (r2 TOSCPL CRESTLNE 6040000 INTL 20060608)
[ 0.000000] ACPI: FACS 7FEE2FC0, 0040
[ 0.000000] ACPI: APIC 7FEDFC54, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 7FEDFCBC, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 7FEDFCF4, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA 7FEDFD30, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: TMOR 7FEDFD62, 0026 (r1 PTLTD 6040000 PTL 3)
[ 0.000000] ACPI: SLIC 7FEDFD88, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0)
[ 0.000000] ACPI: OSFR 7FEDFEFE, 0072 (r1 TOSHIB A+2nd ID 6040000 TASM 4010000)
[ 0.000000] ACPI: APIC 7FEDFF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7FEDFFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 7FED8B6D, 02AD (r1 SataRe SataAhci 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7FED80DF, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7FED8039, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7FED7B53, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1162MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00009000 - 0000fe80
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000200000 - 00009c59a0] TEXT DATA BSS ==> [0000200000 - 00009c59a0]
[ 0.000000] #4 [00009c6000 - 00009ca000] INIT_PG_TABLE ==> [00009c6000 - 00009ca000]
[ 0.000000] #5 [000009b400 - 0000100000] BIOS reserved ==> [000009b400 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f71a0] 000f71a0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007fed0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0007fed0
[ 0.000000] On node 0 totalpages: 523883
[ 0.000000] free_area_init_node: node 0, pgdat c0862f00, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2326 pages used for memmap
[ 0.000000] HighMem zone: 295356 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519789
[ 0.000000] Kernel command line: root=/dev/sda3
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.516 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Memory: 2069288k/2095936k available (4130k kernel code, 25380k reserved, 2811k data, 368k init, 1190728k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xffc79000 - 0xfffff000 (3608 kB)
[ 0.000999] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000999] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000999] .init : 0xc08ce000 - 0xc092a000 ( 368 kB)
[ 0.000999] .data : 0xc0608846 - 0xc08c772c (2811 kB)
[ 0.000999] .text : 0xc0200000 - 0xc0608846 (4130 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] hpet clockevent registered
[ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.03 BogoMIPS (lpj=1795516)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] SELinux: Starting in permissive mode
[ 0.000999] Mount-cache hash table entries: 512
[ 0.000999] Initializing cgroup subsys ns
[ 0.000999] Initializing cgroup subsys cpuacct
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001010] CPU: L2 cache: 2048K
[ 0.001103] CPU: Physical Processor ID: 0
[ 0.001196] CPU: Processor Core ID: 0
[ 0.001288] using mwait in idle threads.
[ 0.001389] Checking 'hlt' instruction... OK.
[ 0.005539] ACPI: Core revision 20080926
[ 0.016522] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.026749] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 0.026995] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 3590.82 BogoMIPS (lpj=1795412)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 2048K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.098451] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 0.099144] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.100015] Brought up 2 CPUs
[ 0.100109] Total of 2 processors activated (7181.85 BogoMIPS).
[ 0.100298] khelper used greatest stack depth: 7096 bytes left
[ 0.101103] net_namespace: 748 bytes
[ 0.101346] Time: 0:55:16 Date: 04/28/09
[ 0.101346] NET: Registered protocol family 16
[ 0.102015] ACPI: bus type pci registered
[ 0.102120] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.102120] PCI: MCFG area at e0000000 reserved in E820
[ 0.102206] PCI: Using MMCONFIG for extended config space
[ 0.102302] PCI: Using configuration type 1 for base access
[ 0.109765] ACPI: EC: Look up EC in DSDT
[ 0.114045] ACPI: BIOS _OSI(Linux) query ignored
[ 0.115253] ACPI: Interpreter enabled
[ 0.115348] ACPI: (supports S0 S3 S4 S5)
[ 0.115677] ACPI: Using IOAPIC for interrupt routing
[ 0.118003] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.128002] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.185093] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.185974] ACPI: EC: driver started in interrupt mode
[ 0.186082] ACPI: No dock devices found.
[ 0.186125] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.186247] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.186247] pci 0000:00:01.0: PME# disabled
[ 0.186329] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
[ 0.186396] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
[ 0.186470] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8804800-0xf8804bff]
[ 0.186521] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.186621] pci 0000:00:1a.7: PME# disabled
[ 0.187029] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8800000-0xf8803fff]
[ 0.187074] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.187172] pci 0000:00:1b.0: PME# disabled
[ 0.187335] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.187433] pci 0000:00:1c.0: PME# disabled
[ 0.187599] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.187697] pci 0000:00:1c.1: PME# disabled
[ 0.187864] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.187976] pci 0000:00:1c.2: PME# disabled
[ 0.188142] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.188241] pci 0000:00:1c.3: PME# disabled
[ 0.188408] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.188507] pci 0000:00:1c.4: PME# disabled
[ 0.188667] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
[ 0.188735] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
[ 0.188801] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
[ 0.188873] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8804c00-0xf8804fff]
[ 0.188924] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.188976] pci 0000:00:1d.7: PME# disabled
[ 0.189226] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.189360] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.189491] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.189500] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.189509] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.189517] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.189525] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
[ 0.189602] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
[ 0.189610] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
[ 0.189618] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
[ 0.189626] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
[ 0.189634] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.189643] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8804000-0xf88047ff]
[ 0.189665] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.189763] pci 0000:00:1f.2: PME# disabled
[ 0.189887] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.189995] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.190061] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.190070] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
[ 0.190078] pci 0000:01:00.0: reg 18 32bit mmio: [0xc7ef0000-0xc7efffff]
[ 0.190105] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.190117] pci 0000:01:00.0: supports D1 D2
[ 0.190167] pci 0000:01:00.1: reg 10 32bit mmio: [0xc7eec000-0xc7eeffff]
[ 0.190215] pci 0000:01:00.1: supports D1 D2
[ 0.190289] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.190293] pci 0000:00:01.0: bridge 32bit mmio: [0xc7e00000-0xc7efffff]
[ 0.190298] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.190360] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[ 0.190365] pci 0000:00:1c.0: bridge 32bit mmio: [0xc0000000-0xc3ffffff]
[ 0.190374] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xcc000000-0xcdffffff]
[ 0.190451] pci 0000:04:00.0: reg 10 io port: [0x4000-0x40ff]
[ 0.190481] pci 0000:04:00.0: reg 18 64bit mmio: [0xf0000000-0xf0000fff]
[ 0.190511] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.190526] pci 0000:04:00.0: supports D1 D2
[ 0.190528] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.190629] pci 0000:04:00.0: PME# disabled
[ 0.190795] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
[ 0.190800] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0000000-0xf3ffffff]
[ 0.190808] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfa000000-0xfbffffff]
[ 0.190926] pci 0000:05:00.0: reg 10 64bit mmio: [0xf4000000-0xf4001fff]
[ 0.191026] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.191148] pci 0000:05:00.0: PME# disabled
[ 0.191343] pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
[ 0.191348] pci 0000:00:1c.2: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
[ 0.191356] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfc000000-0xfdffffff]
[ 0.191430] pci 0000:06:00.0: reg 10 32bit mmio: [0xb8000000-0xb80003ff]
[ 0.191452] pci 0000:06:00.0: reg 18 io port: [0x6000-0x607f]
[ 0.191494] pci 0000:06:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.191587] pci 0000:00:1c.3: bridge io port: [0x6000-0x6fff]
[ 0.191592] pci 0000:00:1c.3: bridge 32bit mmio: [0xb8000000-0xbbffffff]
[ 0.191600] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xc8000000-0xc9ffffff]
[ 0.191704] pci 0000:09:00.0: supports D1
[ 0.191706] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[ 0.191807] pci 0000:09:00.0: PME# disabled
[ 0.191982] pci 0000:00:1c.4: bridge 32bit mmio: [0xf8000000-0xf84fffff]
[ 0.192059] pci 0000:0a:00.0: reg 10 32bit mmio: [0xf8400000-0xf8400fff]
[ 0.192072] pci 0000:0a:00.0: reg 14 32bit mmio: [0xf8000000-0xf83fffff]
[ 0.192248] pci 0000:09:00.0: bridge 32bit mmio: [0xf8000000-0xf84fffff]
[ 0.192326] pci 0000:0c:04.0: reg 10 32bit mmio: [0xf8500000-0xf8500fff]
[ 0.192340] pci 0000:0c:04.0: supports D1 D2
[ 0.192342] pci 0000:0c:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192441] pci 0000:0c:04.0: PME# disabled
[ 0.192580] pci 0000:0c:04.1: reg 10 32bit mmio: [0xf8502000-0xf85027ff]
[ 0.192590] pci 0000:0c:04.1: reg 14 32bit mmio: [0xf8504000-0xf8507fff]
[ 0.192639] pci 0000:0c:04.1: supports D1 D2
[ 0.192641] pci 0000:0c:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.192739] pci 0000:0c:04.1: PME# disabled
[ 0.192875] pci 0000:0c:04.2: reg 10 32bit mmio: [0xf8501000-0xf8501fff]
[ 0.192927] pci 0000:0c:04.2: supports D1 D2
[ 0.192929] pci 0000:0c:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.192975] pci 0000:0c:04.2: PME# disabled
[ 0.193112] pci 0000:0c:04.3: reg 10 32bit mmio: [0xf8502800-0xf85028ff]
[ 0.193167] pci 0000:0c:04.3: supports D1 D2
[ 0.193169] pci 0000:0c:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.193268] pci 0000:0c:04.3: PME# disabled
[ 0.193421] pci 0000:00:1e.0: transparent bridge
[ 0.193522] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8500000-0xf85fffff]
[ 0.193594] bus 00 -> node 0
[ 0.193601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.194120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.194283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.194440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.194595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.194751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.194907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.195085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.210071] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.210406] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.211290] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.212269] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.213179] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.214182] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.215090] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.216019] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.217987] SCSI subsystem initialized
[ 0.218066] libata version 3.00 loaded.
[ 0.218066] usbcore: registered new interface driver usbfs
[ 0.218099] usbcore: registered new interface driver hub
[ 0.218099] usbcore: registered new device driver usb
[ 0.218099] PCI: Using ACPI for IRQ routing
[ 0.221005] cfg80211: Using static regulatory domain info
[ 0.221067] cfg80211: Regulatory domain: US
[ 0.221159] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.221291] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.221387] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.221484] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.221581] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.221678] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.221776] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.221873] cfg80211: Calling CRDA for country: US
[ 0.221987] NetLabel: Initializing
[ 0.222064] NetLabel: domain hash size = 128
[ 0.222157] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.222263] NetLabel: unlabeled traffic allowed by default
[ 0.222366] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.222680] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.225010] pnp: PnP ACPI init
[ 0.225072] ACPI: bus type pnp registered
[ 0.253766] pnp: PnP ACPI: found 10 devices
[ 0.253861] ACPI: ACPI bus type pnp unregistered
[ 0.253964] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.254063] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.254161] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.254258] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.254355] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.254453] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.254555] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.254653] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.254754] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.254856] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.254952] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.255049] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.255146] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.255244] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.255341] system 00:06: ioport range 0xff00-0xff7f has been reserved
[ 0.290274] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.290372] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.290470] pci 0000:00:01.0: MEM window: 0xc7e00000-0xc7efffff
[ 0.290570] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.290705] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.290802] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.290903] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc3ffffff
[ 0.291002] pci 0000:00:1c.0: PREFETCH window: 0x000000cc000000-0x000000cdffffff
[ 0.291142] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.291239] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.291339] pci 0000:00:1c.1: MEM window: 0xf0000000-0xf3ffffff
[ 0.291437] pci 0000:00:1c.1: PREFETCH window: 0x000000fa000000-0x000000fbffffff
[ 0.291578] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[ 0.291676] pci 0000:00:1c.2: IO window: 0x5000-0x5fff
[ 0.291775] pci 0000:00:1c.2: MEM window: 0xf4000000-0xf7ffffff
[ 0.291875] pci 0000:00:1c.2: PREFETCH window: 0x000000fc000000-0x000000fdffffff
[ 0.292013] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[ 0.292110] pci 0000:00:1c.3: IO window: 0x6000-0x6fff
[ 0.292210] pci 0000:00:1c.3: MEM window: 0xb8000000-0xbbffffff
[ 0.292309] pci 0000:00:1c.3: PREFETCH window: 0x000000c8000000-0x000000c9ffffff
[ 0.292447] pci 0000:09:00.0: PCI bridge, secondary bus 0000:0a
[ 0.292546] pci 0000:09:00.0: IO window: disabled
[ 0.292648] pci 0000:09:00.0: MEM window: 0xf8000000-0xf84fffff
[ 0.292750] pci 0000:09:00.0: PREFETCH window: disabled
[ 0.292855] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
[ 0.292952] pci 0000:00:1c.4: IO window: disabled
[ 0.293050] pci 0000:00:1c.4: MEM window: 0xf8000000-0xf84fffff
[ 0.293148] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.293252] pci 0000:0c:04.0: CardBus bridge, secondary bus 0000:0d
[ 0.293347] pci 0000:0c:04.0: IO window: 0x007000-0x0070ff
[ 0.293446] pci 0000:0c:04.0: IO window: 0x007400-0x0074ff
[ 0.293548] pci 0000:0c:04.0: PREFETCH window: 0x88000000-0x8bffffff
[ 0.293648] pci 0000:0c:04.0: MEM window: 0x90000000-0x93ffffff
[ 0.293748] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
[ 0.293846] pci 0000:00:1e.0: IO window: 0x7000-0x7fff
[ 0.293946] pci 0000:00:1e.0: MEM window: 0xf8500000-0xf85fffff
[ 0.294045] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
[ 0.294190] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.294289] pci 0000:00:01.0: setting latency timer to 64
[ 0.294299] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.294399] pci 0000:00:1c.0: setting latency timer to 64
[ 0.294408] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.294511] pci 0000:00:1c.1: setting latency timer to 64
[ 0.294521] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.294621] pci 0000:00:1c.2: setting latency timer to 64
[ 0.294631] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.294731] pci 0000:00:1c.3: setting latency timer to 64
[ 0.294740] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.294839] pci 0000:00:1c.4: setting latency timer to 64
[ 0.294852] pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.294953] pci 0000:09:00.0: setting latency timer to 64
[ 0.294962] pci 0000:00:1e.0: setting latency timer to 64
[ 0.294972] pci 0000:0c:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.295074] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.295169] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.295264] bus: 01 index 0 io port: [0x2000-0x2fff]
[ 0.295360] bus: 01 index 1 mmio: [0xc7e00000-0xc7efffff]
[ 0.295455] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.295551] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.295645] bus: 02 index 0 io port: [0x3000-0x3fff]
[ 0.295739] bus: 02 index 1 mmio: [0xc0000000-0xc3ffffff]
[ 0.295834] bus: 02 index 2 mmio: [0xcc000000-0xcdffffff]
[ 0.295929] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.296024] bus: 04 index 0 io port: [0x4000-0x4fff]
[ 0.296118] bus: 04 index 1 mmio: [0xf0000000-0xf3ffffff]
[ 0.296214] bus: 04 index 2 mmio: [0xfa000000-0xfbffffff]
[ 0.296308] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.296403] bus: 05 index 0 io port: [0x5000-0x5fff]
[ 0.296499] bus: 05 index 1 mmio: [0xf4000000-0xf7ffffff]
[ 0.296595] bus: 05 index 2 mmio: [0xfc000000-0xfdffffff]
[ 0.296690] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.296783] bus: 06 index 0 io port: [0x6000-0x6fff]
[ 0.296879] bus: 06 index 1 mmio: [0xb8000000-0xbbffffff]
[ 0.296974] bus: 06 index 2 mmio: [0xc8000000-0xc9ffffff]
[ 0.297070] bus: 06 index 3 mmio: [0x0-0x0]
[ 0.297164] bus: 09 index 0 mmio: [0x0-0x0]
[ 0.297256] bus: 09 index 1 mmio: [0xf8000000-0xf84fffff]
[ 0.297353] bus: 09 index 2 mmio: [0x0-0x0]
[ 0.297447] bus: 09 index 3 mmio: [0x0-0x0]
[ 0.297543] bus: 0a index 0 mmio: [0x0-0x0]
[ 0.297637] bus: 0a index 1 mmio: [0xf8000000-0xf84fffff]
[ 0.297733] bus: 0a index 2 mmio: [0x0-0x0]
[ 0.297827] bus: 0a index 3 mmio: [0x0-0x0]
[ 0.297921] bus: 0c index 0 io port: [0x7000-0x7fff]
[ 0.298016] bus: 0c index 1 mmio: [0xf8500000-0xf85fffff]
[ 0.298111] bus: 0c index 2 mmio: [0x88000000-0x8bffffff]
[ 0.298207] bus: 0c index 3 io port: [0x00-0xffff]
[ 0.298301] bus: 0c index 4 mmio: [0x000000-0xffffffff]
[ 0.298397] bus: 0d index 0 io port: [0x7000-0x70ff]
[ 0.299366] bus: 0d index 1 io port: [0x7400-0x74ff]
[ 0.299461] bus: 0d index 2 mmio: [0x88000000-0x8bffffff]
[ 0.299558] bus: 0d index 3 mmio: [0x90000000-0x93ffffff]
[ 0.299661] NET: Registered protocol family 2
[ 0.302553] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.302899] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.303425] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.303719] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.303816] TCP reno registered
[ 0.304572] NET: Registered protocol family 1
[ 0.304894] Simple Boot Flag at 0x36 set to 0x1
[ 0.305615] apm: BIOS not found.
[ 0.305953] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.306123] alg: cipher: Test 1 failed on encryption for aes-asm
[ 0.306222] 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08
[ 0.306325] cryptomgr_test used greatest stack depth: 6992 bytes left
[ 0.306549] audit: initializing netlink socket (disabled)
[ 0.306653] type=2000 audit(1240880116.305:1): initialized
[ 0.315753] highmem bounce pool size: 64 pages
[ 0.315851] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.318539] VFS: Disk quotas dquot_6.5.1
[ 0.318710] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.319615] NTFS driver 2.1.29 [Flags: R/W DEBUG].
[ 0.319900] msgmni has been set to 1717
[ 0.320101] SELinux: Registering netfilter hooks
[ 0.320233] cryptomgr_test used greatest stack depth: 6936 bytes left
[ 0.320482] alg: No test for stdrng (krng)
[ 0.320679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.320811] io scheduler noop registered
[ 0.320905] io scheduler anticipatory registered
[ 0.320999] io scheduler deadline registered
[ 0.321104] io scheduler cfq registered (default)
[ 0.321214] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2e00
[ 0.321216] pci 0000:00:1a.0: Performing full reset
[ 0.321234] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.321236] pci 0000:00:1a.1: Performing full reset
[ 0.321288] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x3e00
[ 0.321290] pci 0000:00:1d.0: Performing full reset
[ 0.321309] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.321311] pci 0000:00:1d.1: Performing full reset
[ 0.321330] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.321332] pci 0000:00:1d.2: Performing full reset
[ 0.321376] pci 0000:01:00.0: Boot video device
[ 0.372744] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.372781] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.372898] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 0.372908] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.372950] pci_express 0000:00:01.0:pcie02: allocate port service
[ 0.372990] pci_express 0000:00:01.0:pcie03: allocate port service
[ 0.373072] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.373123] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.373251] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 0.373268] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.373307] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.373345] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.373450] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.373504] pcieport-driver 0000:00:1c.1: found MSI capability
[ 0.373633] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X
[ 0.373651] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 0.373691] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 0.373730] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 0.373832] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.373882] pcieport-driver 0000:00:1c.2: found MSI capability
[ 0.374011] pcieport-driver 0000:00:1c.2: irq 2300 for MSI/MSI-X
[ 0.374028] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 0.374067] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 0.374105] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 0.374209] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.374259] pcieport-driver 0000:00:1c.3: found MSI capability
[ 0.374388] pcieport-driver 0000:00:1c.3: irq 2299 for MSI/MSI-X
[ 0.374404] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 0.374443] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 0.374481] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 0.374583] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.374633] pcieport-driver 0000:00:1c.4: found MSI capability
[ 0.374761] pcieport-driver 0000:00:1c.4: irq 2298 for MSI/MSI-X
[ 0.374778] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 0.374816] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 0.374855] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 0.375046] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.378304] Non-volatile memory driver v1.2
[ 0.378574] Linux agpgart interface v0.103
[ 0.378950] ACPI: AC Adapter [ACAD] (on-line)
[ 0.500499] Switched to high resolution mode on CPU 1
[ 0.500949] Switched to high resolution mode on CPU 0
[ 0.523410] ACPI: Battery Slot [BAT1] (battery present)
[ 0.523684] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.524258] ACPI: Power Button (FF) [PWRF]
[ 0.524433] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.524614] ACPI: Lid Switch [LID0]
[ 0.524783] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.525257] ACPI: Power Button (CM) [PWRB]
[ 0.525918] ACPI: SSDT 7FED886D, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 0.526551] ACPI: SSDT 7FED833E, 04AA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 0.529315] Monitor-Mwait will be used to enter C-1 state
[ 0.529319] Monitor-Mwait will be used to enter C-2 state
[ 0.529322] Monitor-Mwait will be used to enter C-3 state
[ 0.529366] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.529735] processor ACPI_CPU:00: registered as cooling_device0
[ 0.529832] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.530423] ACPI: SSDT 7FED8AA5, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 0.531017] ACPI: SSDT 7FED87E8, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 0.532261] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.532628] processor ACPI_CPU:01: registered as cooling_device1
[ 0.532727] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.562278] [drm] Initialized drm 1.1.0 20060810
[ 0.563436] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 0.565624] brd: module loaded
[ 0.566501] loop: module loaded
[ 0.566594] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 0.566690] Copyright (c) 1999-2006 Intel Corporation.
[ 0.566837] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 0.566934] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.567120] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 0.567216] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.567449] sky2 driver version 1.22
[ 0.567690] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.567801] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.567912] r8169 0000:04:00.0: setting latency timer to 64
[ 0.568029] r8169 0000:04:00.0: irq 2297 for MSI/MSI-X
[ 0.568318] eth0: RTL8101e at 0xf7c60000, 00:1b:38:1c:79:ae, XID 34000000 IRQ 2297
[ 0.579099] console [netcon0] enabled
[ 0.579196] netconsole: network logging started
[ 0.579364] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.579589] Loading iSCSI transport class v2.0-870.
[ 0.579900] Driver 'sd' needs updating - please use bus_type methods
[ 0.580051] Driver 'sr' needs updating - please use bus_type methods
[ 0.580246] ahci 0000:00:1f.2: version 3.0
[ 0.580257] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.580389] ahci 0000:00:1f.2: irq 2296 for MSI/MSI-X
[ 0.580445] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.580578] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 0.580711] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.580927] scsi0 : ahci
[ 0.581169] scsi1 : ahci
[ 0.581367] scsi2 : ahci
[ 0.581603] ata1: SATA max UDMA/133 abar m2048@0xf8804000 port 0xf8804100 irq 2296
[ 0.581737] ata2: SATA max UDMA/133 abar m2048@0xf8804000 port 0xf8804180 irq 2296
[ 0.581869] ata3: SATA max UDMA/133 abar m2048@0xf8804000 port 0xf8804200 irq 2296
[ 1.039023] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.039837] ACPI Warning (nspredef-0852): \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20080926]
[ 1.040088] ata1.00: _GTF unexpected object type 0x1
[ 1.397578] ata1.00: ATA-7: TOSHIBA MK2035GSS, DK020M, max UDMA/100
[ 1.397676] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.399169] ata1.00: _GTF unexpected object type 0x1
[ 1.399457] ata1.00: configured for UDMA/100
[ 1.715019] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.031018] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.042099] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
[ 2.042399] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 2.042545] sd 0:0:0:0: [sda] Write Protect is off
[ 2.042641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.042668] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.042859] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 2.043015] sd 0:0:0:0: [sda] Write Protect is off
[ 2.043111] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.043138] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.043271] sda: sda1 sda2 sda3 sda4
[ 2.132531] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.132729] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.132956] ata_piix 0000:00:1f.1: version 2.12
[ 2.132967] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.133101] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.133170] scsi3 : ata_piix
[ 2.133393] scsi4 : ata_piix
[ 2.134222] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 2.134327] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 2.305062] ata4.00: ATAPI: TOSHIBA DVDW/HD TS-L802A, TO35, max UDMA/33
[ 2.344273] ata4.00: configured for UDMA/33
[ 2.520993] scsi 3:0:0:0: CD-ROM TOSHIBA DVDW/HD TS-L802A TO35 PQ: 0 ANSI: 5
[ 2.564456] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.564588] Uniform CD-ROM driver Revision: 3.20
[ 2.564841] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.564937] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.565386] yenta_cardbus 0000:0c:04.0: CardBus bridge found [1179:ff00]
[ 2.565502] yenta_cardbus 0000:0c:04.0: Enabling burst memory read transactions
[ 2.565637] yenta_cardbus 0000:0c:04.0: Using CSCINT to route CSC interrupts to PCI
[ 2.565769] yenta_cardbus 0000:0c:04.0: Routing CardBus interrupts to PCI
[ 2.565869] yenta_cardbus 0000:0c:04.0: TI: mfunc 0x10a01b22, devctl 0x64
[ 2.789023] yenta_cardbus 0000:0c:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 2.789121] yenta_cardbus 0000:0c:04.0: Socket status: 30000006
[ 2.789219] pci_bus 0000:0c: Raising subordinate bus# of parent bus (#0c) from #0d to #10
[ 2.789354] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
[ 2.789486] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge Memory window: 0xf8500000 - 0xf85fffff
[ 2.789620] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 3.040160] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.040259] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[ 3.040284] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.040393] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.040397] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.040549] drivers/usb/core/inode.c: creating file 'devices'
[ 3.040554] drivers/usb/core/inode.c: creating file '001'
[ 3.040607] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.040744] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
[ 3.040748] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[ 3.040771] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 3.044658] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.044758] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.044760] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 3.044773] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8804800
[ 3.044871] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 3.048767] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 3.054009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.054131] usb usb1: default language 0x0409
[ 3.054170] usb usb1: uevent
[ 3.054212] usb usb1: usb_probe_device
[ 3.054215] usb usb1: configuration #1 chosen from 1 choice
[ 3.054315] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.054330] usb 1-0:1.0: uevent
[ 3.054368] hub 1-0:1.0: usb_probe_interface
[ 3.054370] hub 1-0:1.0: usb_probe_interface - got id
[ 3.054372] hub 1-0:1.0: USB hub found
[ 3.054473] hub 1-0:1.0: 4 ports detected
[ 3.054567] hub 1-0:1.0: standalone hub
[ 3.054569] hub 1-0:1.0: no power switching (usb 1.0)
[ 3.054570] hub 1-0:1.0: individual port over-current protection
[ 3.054572] hub 1-0:1.0: power on to power good time: 20ms
[ 3.054577] hub 1-0:1.0: local power source is good
[ 3.054579] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 3.054693] drivers/usb/core/inode.c: creating file '001'
[ 3.054758] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.054855] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.054985] usb usb1: Product: EHCI Host Controller
[ 3.055088] usb usb1: Manufacturer: Linux 2.6.28-gentoo-r5 ehci_hcd
[ 3.055184] usb usb1: SerialNumber: 0000:00:1a.7
[ 3.055296] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.055404] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.055408] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.055549] drivers/usb/core/inode.c: creating file '002'
[ 3.055603] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.056589] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 3.056594] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[ 3.056613] ehci_hcd 0000:00:1d.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 3.060496] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.060596] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.060598] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 3.060616] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8804c00
[ 3.060713] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 3.064607] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 3.070009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.070130] usb usb2: default language 0x0409
[ 3.070169] usb usb2: uevent
[ 3.070210] usb usb2: usb_probe_device
[ 3.070212] usb usb2: configuration #1 chosen from 1 choice
[ 3.070311] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 3.070327] usb 2-0:1.0: uevent
[ 3.070365] hub 2-0:1.0: usb_probe_interface
[ 3.070368] hub 2-0:1.0: usb_probe_interface - got id
[ 3.070369] hub 2-0:1.0: USB hub found
[ 3.070467] hub 2-0:1.0: 6 ports detected
[ 3.070561] hub 2-0:1.0: standalone hub
[ 3.070562] hub 2-0:1.0: no power switching (usb 1.0)
[ 3.070564] hub 2-0:1.0: individual port over-current protection
[ 3.070566] hub 2-0:1.0: power on to power good time: 20ms
[ 3.070576] hub 2-0:1.0: local power source is good
[ 3.070578] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 3.070657] drivers/usb/core/inode.c: creating file '001'
[ 3.070722] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.070820] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.070950] usb usb2: Product: EHCI Host Controller
[ 3.071050] usb usb2: Manufacturer: Linux 2.6.28-gentoo-r5 ehci_hcd
[ 3.071145] usb usb2: SerialNumber: 0000:00:1d.7
[ 3.071284] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.071381] ohci_hcd: block sizes: ed 64 td 64
[ 3.071428] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.071548] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.071650] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.071654] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.071796] drivers/usb/core/inode.c: creating file '003'
[ 3.071851] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.071986] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 3.072089] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.072091] uhci_hcd 0000:00:1a.0: Performing full reset
[ 3.072111] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 3.072242] usb usb3: default language 0x0409
[ 3.072289] usb usb3: uevent
[ 3.072326] usb usb3: usb_probe_device
[ 3.072328] usb usb3: configuration #1 chosen from 1 choice
[ 3.072428] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 3.072443] usb 3-0:1.0: uevent
[ 3.072479] hub 3-0:1.0: usb_probe_interface
[ 3.072481] hub 3-0:1.0: usb_probe_interface - got id
[ 3.072483] hub 3-0:1.0: USB hub found
[ 3.072581] hub 3-0:1.0: 2 ports detected
[ 3.072675] hub 3-0:1.0: standalone hub
[ 3.072676] hub 3-0:1.0: no power switching (usb 1.0)
[ 3.072678] hub 3-0:1.0: individual port over-current protection
[ 3.072680] hub 3-0:1.0: power on to power good time: 2ms
[ 3.072684] hub 3-0:1.0: local power source is good
[ 3.072686] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 3.072746] drivers/usb/core/inode.c: creating file '001'
[ 3.072809] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.072907] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.073041] usb usb3: Product: UHCI Host Controller
[ 3.073136] usb usb3: Manufacturer: Linux 2.6.28-gentoo-r5 uhci_hcd
[ 3.073233] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.073349] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.073451] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.073454] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.073594] drivers/usb/core/inode.c: creating file '004'
[ 3.073653] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.073789] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 3.073887] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.073889] uhci_hcd 0000:00:1a.1: Performing full reset
[ 3.073907] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 3.073920] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 3.074054] usb usb4: default language 0x0409
[ 3.074090] usb usb4: uevent
[ 3.074130] usb usb4: usb_probe_device
[ 3.074132] usb usb4: configuration #1 chosen from 1 choice
[ 3.074231] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 3.074249] usb 4-0:1.0: uevent
[ 3.074285] hub 4-0:1.0: usb_probe_interface
[ 3.074287] hub 4-0:1.0: usb_probe_interface - got id
[ 3.074289] hub 4-0:1.0: USB hub found
[ 3.074388] hub 4-0:1.0: 2 ports detected
[ 3.074482] hub 4-0:1.0: standalone hub
[ 3.074483] hub 4-0:1.0: no power switching (usb 1.0)
[ 3.074485] hub 4-0:1.0: individual port over-current protection
[ 3.074487] hub 4-0:1.0: power on to power good time: 2ms
[ 3.074491] hub 4-0:1.0: local power source is good
[ 3.074493] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 3.074551] drivers/usb/core/inode.c: creating file '001'
[ 3.074614] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.074712] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.074843] usb usb4: Product: UHCI Host Controller
[ 3.074938] usb usb4: Manufacturer: Linux 2.6.28-gentoo-r5 uhci_hcd
[ 3.075037] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.075152] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.075254] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.075257] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.075396] drivers/usb/core/inode.c: creating file '005'
[ 3.075449] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.075586] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.075683] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.075686] uhci_hcd 0000:00:1d.0: Performing full reset
[ 3.075703] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 3.075708] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 3.075835] usb usb5: default language 0x0409
[ 3.075874] usb usb5: uevent
[ 3.075911] usb usb5: usb_probe_device
[ 3.075913] usb usb5: configuration #1 chosen from 1 choice
[ 3.076015] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 3.076030] usb 5-0:1.0: uevent
[ 3.076067] hub 5-0:1.0: usb_probe_interface
[ 3.076069] hub 5-0:1.0: usb_probe_interface - got id
[ 3.076071] hub 5-0:1.0: USB hub found
[ 3.076169] hub 5-0:1.0: 2 ports detected
[ 3.076263] hub 5-0:1.0: standalone hub
[ 3.076264] hub 5-0:1.0: no power switching (usb 1.0)
[ 3.076266] hub 5-0:1.0: individual port over-current protection
[ 3.076268] hub 5-0:1.0: power on to power good time: 2ms
[ 3.076272] hub 5-0:1.0: local power source is good
[ 3.076274] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 3.076335] drivers/usb/core/inode.c: creating file '001'
[ 3.076397] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.076495] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.076626] usb usb5: Product: UHCI Host Controller
[ 3.076720] usb usb5: Manufacturer: Linux 2.6.28-gentoo-r5 uhci_hcd
[ 3.076817] usb usb5: SerialNumber: 0000:00:1d.0
[ 3.076929] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.077035] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.077038] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.077180] drivers/usb/core/inode.c: creating file '006'
[ 3.077233] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.077369] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.077468] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.077470] uhci_hcd 0000:00:1d.1: Performing full reset
[ 3.077487] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 3.077499] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 3.077627] usb usb6: default language 0x0409
[ 3.077665] usb usb6: uevent
[ 3.077702] usb usb6: usb_probe_device
[ 3.077705] usb usb6: configuration #1 chosen from 1 choice
[ 3.077803] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 3.077818] usb 6-0:1.0: uevent
[ 3.077854] hub 6-0:1.0: usb_probe_interface
[ 3.077856] hub 6-0:1.0: usb_probe_interface - got id
[ 3.077858] hub 6-0:1.0: USB hub found
[ 3.077956] hub 6-0:1.0: 2 ports detected
[ 3.078054] hub 6-0:1.0: standalone hub
[ 3.078055] hub 6-0:1.0: no power switching (usb 1.0)
[ 3.078057] hub 6-0:1.0: individual port over-current protection
[ 3.078060] hub 6-0:1.0: power on to power good time: 2ms
[ 3.078064] hub 6-0:1.0: local power source is good
[ 3.078066] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 3.078127] drivers/usb/core/inode.c: creating file '001'
[ 3.078188] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.078286] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.078416] usb usb6: Product: UHCI Host Controller
[ 3.078511] usb usb6: Manufacturer: Linux 2.6.28-gentoo-r5 uhci_hcd
[ 3.078606] usb usb6: SerialNumber: 0000:00:1d.1
[ 3.078721] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.078822] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.078826] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.078965] drivers/usb/core/inode.c: creating file '007'
[ 3.079018] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.079154] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.079252] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 3.079254] uhci_hcd 0000:00:1d.2: Performing full reset
[ 3.079271] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 3.079276] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 3.079408] usb usb7: default language 0x0409
[ 3.079446] usb usb7: uevent
[ 3.079484] usb usb7: usb_probe_device
[ 3.079486] usb usb7: configuration #1 chosen from 1 choice
[ 3.079585] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 3.079602] usb 7-0:1.0: uevent
[ 3.079643] hub 7-0:1.0: usb_probe_interface
[ 3.079645] hub 7-0:1.0: usb_probe_interface - got id
[ 3.079647] hub 7-0:1.0: USB hub found
[ 3.079746] hub 7-0:1.0: 2 ports detected
[ 3.079840] hub 7-0:1.0: standalone hub
[ 3.079841] hub 7-0:1.0: no power switching (usb 1.0)
[ 3.079843] hub 7-0:1.0: individual port over-current protection
[ 3.079845] hub 7-0:1.0: power on to power good time: 2ms
[ 3.079849] hub 7-0:1.0: local power source is good
[ 3.079851] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 3.079915] drivers/usb/core/inode.c: creating file '001'
[ 3.079979] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.080082] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.080212] usb usb7: Product: UHCI Host Controller
[ 3.080307] usb usb7: Manufacturer: Linux 2.6.28-gentoo-r5 uhci_hcd
[ 3.080403] usb usb7: SerialNumber: 0000:00:1d.2
[ 3.080595] usbcore: registered new interface driver usblp
[ 3.080692] Initializing USB Mass Storage driver...
[ 3.080847] usbcore: registered new interface driver usb-storage
[ 3.080945] USB Mass Storage support registered.
[ 3.081107] usbcore: registered new interface driver libusual
[ 3.081302] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.118374] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.118473] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.118706] mice: PS/2 mouse device common for all mice
[ 3.122448] rtc_cmos 00:07: RTC can wake from S4
[ 3.122604] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.122730] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.122879] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 3.123012] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
[ 3.123145] ACPI: Device needs an ACPI driver
[ 3.123488] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.123908] cpuidle: using governor ladder
[ 3.124535] cpuidle: using governor menu
[ 3.124633] No iBFT detected.
[ 3.124783] Marking TSC unstable due to TSC halts in idle
[ 3.125824] usbcore: registered new interface driver hiddev
[ 3.125965] usbcore: registered new interface driver usbhid
[ 3.126064] usbhid: v2.6:USB HID core driver
[ 3.126272] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
[ 3.126785] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.126945] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.136012] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 3.150631] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.154072] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
[ 3.154078] hub 1-0:1.0: port 3: status 0501 change 0001
[ 3.170070] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
[ 3.170074] hub 2-0:1.0: port 1: status 0501 change 0001
[ 3.170083] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
[ 3.170086] hub 2-0:1.0: port 2: status 0501 change 0001
[ 3.172106] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.174086] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00
[ 3.177516] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
[ 3.177535] uhci_hcd 0000:00:1d.0: port 2 portsc 0082,00
[ 3.177574] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.179103] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.189359] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.189512] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 3.218381] ALSA device list:
[ 3.218475] #0: HDA Intel at 0xf8800000 irq 22
[ 3.218569] #1: HDA ATI HDMI at 0xc7eec000 irq 17
[ 3.218762] Netfilter messages via NETLINK v0.30.
[ 3.218871] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.219299] ctnetlink v0.93: registering with nfnetlink.
[ 3.220117] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.220236] TCP cubic registered
[ 3.220339] Initializing XFRM netlink socket
[ 3.220653] NET: Registered protocol family 10
[ 3.221788] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.221942] IPv6 over IPv4 tunneling driver
[ 3.224924] NET: Registered protocol family 17
[ 3.225293] RPC: Registered udp transport module.
[ 3.225387] RPC: Registered tcp transport module.
[ 3.226283] Using IPI No-Shortcut mode
[ 3.226719] registered taskstats version 1
[ 3.226962] Magic number: 5:977:911
[ 3.254082] hub 1-0:1.0: state 7 ports 4 chg 0008 evt 0000
[ 3.254098] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 3.305296] ehci_hcd 0000:00:1a.7: port 3 high speed
[ 3.305306] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
[ 3.356100] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 3.407299] ehci_hcd 0000:00:1a.7: port 3 high speed
[ 3.407308] ehci_hcd 0000:00:1a.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
[ 3.479706] usb 1-3: skipped 1 descriptor after configuration
[ 3.479714] usb 1-3: skipped 5 descriptors after interface
[ 3.479719] usb 1-3: skipped 1 descriptor after endpoint
[ 3.479724] usb 1-3: skipped 10 descriptors after interface
[ 3.480200] usb 1-3: default language 0x0409
[ 3.485268] usb 1-3: uevent
[ 3.485481] usb 1-3: usb_probe_device
[ 3.485488] usb 1-3: configuration #1 chosen from 1 choice
[ 3.485851] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
[ 3.485900] usb 1-3:1.0: uevent
[ 3.488107] usb 1-3: adding 1-3:1.1 (config #1, interface 1)
[ 3.488166] usb 1-3:1.1: uevent
[ 3.488340] drivers/usb/core/inode.c: creating file '002'
[ 3.488524] usb 1-3: New USB device found, idVendor=04f2, idProduct=b008
[ 3.488663] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 3.488794] usb 1-3: Product: Chicony USB 2.0 Camera
[ 3.488922] usb 1-3: Manufacturer: Chicony Electronics Co., Ltd.
[ 3.489071] usb 1-3: SerialNumber: SN0001
[ 3.489203] hub 2-0:1.0: state 7 ports 6 chg 0006 evt 0000
[ 3.489220] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 3.489233] ehci_hcd 0000:00:1d.7: port 1 low speed --> companion
[ 3.500141] Clocksource tsc unstable (delta = -235060029 ns)
[ 3.539192] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
[ 3.539235] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 3.590388] ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
[ 3.590398] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
[ 3.590408] hub 2-0:1.0: port 2 not reset yet, waiting 50ms
[ 3.641186] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
[ 3.641224] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.641234] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.641242] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
[ 3.704250] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006
[ 3.704268] uhci_hcd 0000:00:1d.0: port 1 portsc 01a3,00
[ 3.704283] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
[ 3.808115] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
[ 3.910094] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 4.085911] usb 5-1: skipped 1 descriptor after interface
[ 4.086022] usb 5-1: uevent
[ 4.086236] usb 5-1: usb_probe_device
[ 4.086242] usb 5-1: configuration #1 chosen from 1 choice
[ 4.090899] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 4.090940] usb 5-1:1.0: uevent
[ 4.091065] usbhid 5-1:1.0: usb_probe_interface
[ 4.091070] usbhid 5-1:1.0: usb_probe_interface - got id
[ 4.128613] input: HID 04d9:0420 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
[ 4.129976] generic-usb 0003:04D9:0420.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0420] on usb-0000:00:1d.0-1/input0
[ 4.130365] drivers/usb/core/inode.c: creating file '002'
[ 4.130567] usb 5-1: New USB device found, idVendor=04d9, idProduct=0420
[ 4.130703] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.130855] uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
[ 4.130869] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 4.132472] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d
[ 4.132655] synaptics: Toshiba Satellite A200 detected, limiting rate to 40pps.
[ 4.204106] usb usb3: suspend_rh (auto-stop)
[ 4.204141] usb usb6: suspend_rh (auto-stop)
[ 4.204174] usb usb7: suspend_rh (auto-stop)
[ 4.204207] usb usb4: suspend_rh (auto-stop)
[ 4.227751] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 4.234145] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[ 4.239188] md: Waiting for all devices to be available before autodetect
[ 4.239343] md: If you don't use raid, use raid=noautodetect
[ 4.240013] md: Autodetecting RAID arrays.
[ 4.240157] md: Scanned 0 and added 0 devices.
[ 4.240292] md: autorun ...
[ 4.240412] md: ... autorun DONE.
[ 4.306658] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.306795] EXT3-fs: write access will be enabled during recovery.
[ 4.336092] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 4.416045] kjournald starting. Commit interval 5 seconds
[ 4.416214] EXT3-fs: recovery complete.
[ 4.418522] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.418677] VFS: Mounted root (ext3 filesystem) readonly.
[ 4.419137] Freeing unused kernel memory: 368k freed
[ 4.419525] Write protecting the kernel text: 4132k
[ 4.420800] Write protecting the kernel read-only data: 1824k
[ 4.476996] usb 5-2: skipped 3 descriptors after interface
[ 4.477029] usb 5-2: skipped 4 descriptors after interface
[ 4.477037] usb 5-2: skipped 4 descriptors after interface
[ 4.477043] usb 5-2: skipped 3 descriptors after interface
[ 4.477060] usb 5-2: skipped 2 descriptors after interface
[ 4.479984] usb 5-2: default language 0x0409
[ 4.489121] usb 5-2: uevent
[ 4.661507] khelper used greatest stack depth: 6868 bytes left
[ 4.661739] usb 5-2: usb_probe_device
[ 4.661747] usb 5-2: configuration #1 chosen from 1 choice
[ 4.664914] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
[ 4.664967] usb 5-2:1.0: uevent
[ 4.667997] usb 5-2: adding 5-2:1.1 (config #1, interface 1)
[ 4.668081] usb 5-2:1.1: uevent
[ 4.670248] usb 5-2: adding 5-2:1.2 (config #1, interface 2)
[ 4.670299] usb 5-2:1.2: uevent
[ 4.673555] usb 5-2: adding 5-2:1.3 (config #1, interface 3)
[ 4.673599] usb 5-2:1.3: uevent
[ 4.676064] usb 5-2: adding 5-2:1.4 (config #1, interface 4)
[ 4.676106] usb 5-2:1.4: uevent
[ 4.678463] usb 5-2: adding 5-2:1.5 (config #1, interface 5)
[ 4.678508] usb 5-2:1.5: uevent
[ 4.681002] usb 5-2: adding 5-2:1.6 (config #1, interface 6)
[ 4.681057] usb 5-2:1.6: uevent
[ 4.683994] usb 5-2: adding 5-2:1.7 (config #1, interface 7)
[ 4.684048] usb 5-2:1.7: uevent
[ 4.687298] drivers/usb/core/inode.c: creating file '003'
[ 4.687560] usb 5-2: New USB device found, idVendor=0fce, idProduct=d090
[ 4.687705] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.687851] usb 5-2: Product: Sony Ericsson W200
[ 4.687979] usb 5-2: Manufacturer: Sony Ericsson
[ 4.688135] usb 5-2: SerialNumber: 356196013662826_0
[ 4.688281] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 5.550275] stty used greatest stack depth: 6624 bytes left
[ 5.593085] grep used greatest stack depth: 6320 bytes left
[ 5.701305] hub 3-0:1.0: hub_suspend
[ 5.701319] usb usb3: bus auto-suspend
[ 5.701325] usb usb3: suspend_rh
[ 5.701351] hub 6-0:1.0: hub_suspend
[ 5.701358] usb usb6: bus auto-suspend
[ 5.701362] usb usb6: suspend_rh
[ 5.701383] hub 7-0:1.0: hub_suspend
[ 5.701389] usb usb7: bus auto-suspend
[ 5.701393] usb usb7: suspend_rh
[ 5.704194] hub 4-0:1.0: hub_suspend
[ 5.704210] usb usb4: bus auto-suspend
[ 5.704216] usb usb4: suspend_rh
[ 5.704241] hub 2-0:1.0: hub_suspend
[ 5.704248] usb usb2: bus auto-suspend
[ 5.704253] ehci_hcd 0000:00:1d.7: suspend root hub
[ 6.764214] usb usb3: uevent
[ 6.764239] usb 3-0:1.0: uevent
[ 6.764365] usb usb4: uevent
[ 6.764385] usb 4-0:1.0: uevent
[ 6.764492] usb usb1: uevent
[ 6.764512] usb 1-0:1.0: uevent
[ 6.764555] usb 1-3: uevent
[ 6.764575] usb 1-3:1.0: uevent
[ 6.764616] usb 1-3:1.1: uevent
[ 6.765438] usb usb5: uevent
[ 6.765459] usb 5-0:1.0: uevent
[ 6.765500] usb 5-1: uevent
[ 6.765523] usb 5-1:1.0: uevent
[ 6.765678] usb 5-2: uevent
[ 6.765700] usb 5-2:1.0: uevent
[ 6.765722] usb 5-2:1.1: uevent
[ 6.765765] usb 5-2:1.2: uevent
[ 6.765825] usb 5-2:1.3: uevent
[ 6.765866] usb 5-2:1.4: uevent
[ 6.765925] usb 5-2:1.5: uevent
[ 6.765947] usb 5-2:1.6: uevent
[ 6.765969] usb 5-2:1.7: uevent
[ 6.766098] usb usb6: uevent
[ 6.766119] usb 6-0:1.0: uevent
[ 6.766225] usb usb7: uevent
[ 6.766248] usb 7-0:1.0: uevent
[ 6.766363] usb usb2: uevent
[ 6.766383] usb 2-0:1.0: uevent
[ 8.067888] EXT3 FS on sda3, internal journal
[ 10.961376] kjournald starting. Commit interval 5 seconds
[ 10.961406] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 10.961947] EXT3 FS on sda4, internal journal
[ 10.961956] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.048581] Adding 4008208k swap on /dev/sda2. Priority:-1 extents:1 across:4008208k
[ 17.525231] ifconfig used greatest stack depth: 6308 bytes left
[ 20.850832] syslog-ng used greatest stack depth: 6140 bytes left
[ 21.941176] r8169: eth0: link up
[ 21.941202] r8169: eth0: link up
[ 32.446155] eth0: no IPv6 routers present
[ 151.326475] autom4te-2.61 used greatest stack depth: 6128 bytes left
[ 173.195027] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 277.440702] ldconfig used greatest stack depth: 6124 bytes left
[ 638.880131] tar used greatest stack depth: 6096 bytes left
[ 849.945619] i686-pc-linux-g used greatest stack depth: 6068 bytes left
[ 850.218852] ebuild.sh used greatest stack depth: 5988 bytes left
[ 1703.013884] pci 0000:01:00.0: power state changed by ACPI to D0
[ 1703.013895] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1705.275058] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 1705.281087] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 1705.392554] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 1705.949202] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 1706.415501] mtrr: no MTRR for d0000000,10000000 found
[ 2962.864194] xauth used greatest stack depth: 5840 bytes left
[ 2964.190352] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 2964.194261] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 2964.308317] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 2964.693262] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 2965.160201] mtrr: no MTRR for d0000000,10000000 found
[ 3020.460295] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3020.468246] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3020.560303] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3021.031250] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3021.491939] mtrr: no MTRR for d0000000,10000000 found
[ 3074.963087] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3074.966273] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3075.032097] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3075.439274] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3075.909533] mtrr: no MTRR for d0000000,10000000 found
[ 3082.923096] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3082.926282] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3082.988330] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3083.390282] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3083.867124] mtrr: no MTRR for d0000000,10000000 found
[ 3183.694519] rsync used greatest stack depth: 5576 bytes left
[ 3296.635988] cc1 used greatest stack depth: 5412 bytes left
[ 3331.694289] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3331.703291] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3331.864314] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3332.410288] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3332.868919] mtrr: no MTRR for d0000000,10000000 found
[ 3338.731289] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3338.740292] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3338.833361] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3339.223290] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3339.685492] mtrr: no MTRR for d0000000,10000000 found
[ 3343.281034] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3343.288289] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3343.390028] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3343.897290] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3344.378071] mtrr: no MTRR for d0000000,10000000 found
[ 3358.067060] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3358.076283] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3358.151311] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3361.176290] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3361.656958] mtrr: no MTRR for d0000000,10000000 found
[ 3373.047031] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3373.056293] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3373.205035] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3379.309293] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3379.785315] mtrr: no MTRR for d0000000,10000000 found
[ 3405.667445] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3405.677328] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3405.764298] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3409.375295] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3409.846264] mtrr: no MTRR for d0000000,10000000 found
[ 3739.653310] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3739.663335] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3739.742310] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3745.443341] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3745.928868] mtrr: no MTRR for d0000000,10000000 found
[ 4017.071314] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4017.076374] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4017.152309] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4017.546373] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4018.005985] mtrr: no MTRR for d0000000,10000000 found
[ 4024.522790] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4024.531371] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4024.611298] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4025.012373] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4025.471454] mtrr: no MTRR for d0000000,10000000 found
[ 4114.850290] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4114.858409] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4114.935037] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4115.318411] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4115.798068] mtrr: no MTRR for d0000000,10000000 found
[ 4118.764036] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4118.772403] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4118.851564] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4119.269382] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4119.744922] mtrr: no MTRR for d0000000,10000000 found
[ 4122.615590] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4122.620385] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4122.690582] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4123.094407] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4123.568633] mtrr: no MTRR for d0000000,10000000 found
[ 4126.806056] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4126.812407] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4126.884043] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4127.273380] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4127.746015] mtrr: no MTRR for d0000000,10000000 found
[ 4199.435040] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4199.443398] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4199.553045] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4199.958399] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4200.415685] mtrr: no MTRR for d0000000,10000000 found
[ 4582.436355] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4582.439456] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4582.501149] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4582.904459] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 118 us
[ 4583.373038] mtrr: no MTRR for d0000000,10000000 found