rendered paste bodyP27 PROM SGI Version 6.150 built 11:59:56 AM Sep 29, 2003
Testing/Initializing memory ............... DONE
Copying PROM code to memory ............... DONE
Discovering local IO ...................... DONE
Discovering NUMAlink connectivity ......... DONE
Found 6 objects (4 hubs, 2 routers) in 66488 usec
Waiting for peers to complete discovery.... DONE
Global master is /hw/module/1/slot/n1
Testing/Initializing all memory ........... DONE
Checking partitioning information ......... DONE
Loading BASEIO prom ....................... DONE
BASEIO PROM Monitor SGI Version 6.136 built 07:36:01 PM Mar 4, 2003 (BE64)
8 CPUs on 4 nodes found.
Installing PROM Device drivers ............
Base I/O Ethernet set to /dev/ethernet/ef0
Walking SCSI Adapter 0 (/hw/module/1/slot/io1), (pci id 0)
1+ 2+ 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 2 device(s)
Walking SCSI Adapter 1 (/hw/module/1/slot/io1), (pci id 1)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)
Initializing PROM Device drivers .......... DONE
Checking hardware inventory ............... DONE
**** System Configuration and Diagnostics Summary ****
CONFIG:
No. of NODEs enabled = 4
No. of NODEs disabled = 0
No. of CPUs enabled = 8
No. of CPUs disabled = 0
Mem enabled = 1920 MB
Mem disabled = 0 MB
No. of RTRs enabled = 2
No. of RTRs disabled = 0
DIAG RESULTS:
ALL DIAGS PASSED.
**** End System Configuration and Diagnostics Summary ****
Starting up the system...
To perform system maintenance instead, press <Esc>
System Maintenance Menu
1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor
Option? 5
Command Monitor. Type "exit" to return to the menu.
>> boot -f bootp(): console=ttyS0
Setting $netaddr to 192.168.1.90 (from server )
Obtaining from server
9830912+790400 entry: 0xa800000000021cb0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29.1 (darkstar@hikari) (gcc version 4.3.3 (GCC for Cross-LFS 4.3.3.20090323) ) #2 SMP Fri Apr 17 21:54:36 CEST 2009
[ 0.000000] ARCH: SGI-IP27
[ 0.000000] PROMLIB: ARC firmware Version 64 Revision 0
[ 0.000000] Discovered 8 cpus on 4 nodes
[ 0.000000] ************** Topology ********************
[ 0.000000] 00 01 02 03
[ 0.000000] 00 0 1 2 2
[ 0.000000] 01 1 0 2 2
[ 0.000000] 02 2 2 0 1
[ 0.000000] 03 2 2 1 0
[ 0.000000] Router 0: 1 0 r
[ 0.000000] Router 1: 3 2 r
[ 0.000000] console [early0] enabled
[ 0.000000] CPU revision is: 00000926 (R10000)
[ 0.000000] FPU revision is: 00000900
[ 0.000000] Checking for the multiply/shift bug... no.
[ 0.000000] Checking for the daddiu bug... no.
[ 0.000000] IP27: Running on node 0.
[ 0.000000] Node 0 has a primary CPU, CPU is running.
[ 0.000000] Node 0 has a secondary CPU, CPU is running.
[ 0.000000] Machine is in M mode.
[ 0.000000] Cpu 0, Nasid 0x0: partnum 0x0 is is xbow
[ 0.000000] Cpu 0, Nasid 0x0, widget 0x8 (partnum 0xc002) is a bridge
[ 0.000000] registering PCI controller with io_map_base unset
[ 0.000000] CPU 0 clock is 195MHz.
[ 0.000000] Determined physical RAM map:
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00364000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[26] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00004000
[ 0.000000] 0: 0x00020000 -> 0x00024000
[ 0.000000] 0: 0x00040000 -> 0x00044000
[ 0.000000] 0: 0x00060000 -> 0x00064000
[ 0.000000] 0: 0x00080000 -> 0x00088000
[ 0.000000] 0: 0x000a0000 -> 0x000a8000
[ 0.000000] 0: 0x000c0000 -> 0x000c8000
[ 0.000000] 0: 0x000e0000 -> 0x000e8000
[ 0.000000] 1: 0x00100000 -> 0x00104000
[ 0.000000] 1: 0x00120000 -> 0x00124000
[ 0.000000] 1: 0x00140000 -> 0x00144000
[ 0.000000] 1: 0x00160000 -> 0x00164000
[ 0.000000] 1: 0x00180000 -> 0x00184000
[ 0.000000] 1: 0x001a0000 -> 0x001a4000
[ 0.000000] 1: 0x001c0000 -> 0x001c4000
[ 0.000000] 1: 0x001e0000 -> 0x001e4000
[ 0.000000] 2: 0x00200000 -> 0x00204000
[ 0.000000] 2: 0x00220000 -> 0x00224000
[ 0.000000] 2: 0x00240000 -> 0x00244000
[ 0.000000] 2: 0x00260000 -> 0x00264000
[ 0.000000] 2: 0x00280000 -> 0x00284000
[ 0.000000] 2: 0x002a0000 -> 0x002a4000
[ 0.000000] 3: 0x00300000 -> 0x00304000
[ 0.000000] 3: 0x00320000 -> 0x00324000
[ 0.000000] 3: 0x00340000 -> 0x00344000
[ 0.000000] 3: 0x00360000 -> 0x00364000
[ 0.000000] REPLICATION: ON nasid 0, ktext from nasid 0, kdata from nasid 0
[ 0.000000] REPLICATION: ON nasid 1, ktext from nasid 0, kdata from nasid 0
[ 0.000000] REPLICATION: ON nasid 2, ktext from nasid 0, kdata from nasid 0
[ 0.000000] REPLICATION: ON nasid 3, ktext from nasid 0, kdata from nasid 0
[ 0.000000] Built 4 zonelists in Node order, mobility grouping on. Total pages: 450976
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=dksc(0,1,0) console=ttyS0
[ 0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[ 0.000000] Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Unified secondary cache 4096kB 2-way, linesize 128 bytes.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[17179569.184000] Console: colour dummy device 80x25
[17179569.208000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[17179569.228000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[17179572.980000] allocated 118620160 bytes of page_cgroup
[17179572.984000] please try cgroup_disable=memory option if you don't want
[17179573.328000] Memory: 1673392k/1966080k available (6886k kernel code, 292688k reserved, 2296k data, 420k init, 0k highmem)
[17179573.332000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=8, Nodes=64
[17179573.336000] Calibrating delay loop... 194.04 BogoMIPS (lpj=388096)
[17179573.416000] Security Framework initialized
[17179573.420000] SELinux: Disabled at boot.
[17179573.424000] Mount-cache hash table entries: 256
[17179573.432000] Initializing cgroup subsys ns
[17179573.436000] Initializing cgroup subsys cpuacct
[17179573.440000] Initializing cgroup subsys memory
[17179573.444000] Initializing cgroup subsys freezer
[17179573.448000] Checking for the daddi bug... no.
[17179573.508000] CPU revision is: 00000926 (R10000)
[17179573.508000] FPU revision is: 00000900
[17179573.508000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[17179573.508000] Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
[17179573.508000] Unified secondary cache 4096kB 2-way, linesize 128 bytes.
[17179573.512000] CPU 1 clock is 195MHz.
[17179573.512000] Calibrating delay loop... 194.56 BogoMIPS (lpj=389120)
[17179573.588000] CPU revision is: 00000926 (R10000)
[17179573.588000] FPU revision is: 00000900
[17179573.588000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[17179573.588000] Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
[17179573.588000] Unified secondary cache 4096kB 2-way, linesize 128 bytes.
[17179573.592000] Cpu 2, Nasid 0x1: partnum 0x0 is is xbow
[17179573.592000] CPU 2 clock is 195MHz.
[17179573.592000] Calibrating delay loop... 195.07 BogoMIPS (lpj=390144)
[17179573.668000] CPU revision is: 00000926 (R10000)
[17179573.668000] FPU revision is: 00000900
[17179573.668000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[17179573.668000] Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
[17179573.668000] Unified secondary cache 4096kB 2-way, linesize 128 bytes.
[17179573.672000] CPU 3 clock is 195MHz.
[17179573.672000] Calibrating delay loop... 195.07 BogoMIPS (lpj=390144)
[17179573.748000] CPU revision is: 00000926 (R10000)
[17179573.748000] FPU revision is: 00000900
[17179573.748000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[17179573.748000] Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
[17179573.748000] Unified secondary cache 4096kB 2-way, linesize 128 bytes.
[17179573.752000] Cpu 4, Nasid 0x2: partnum 0x0 is is xbow
[17179573.752000] CPU 4 clock is 195MHz.
[17179573.752000] Calibrating delay loop... 195.07 BogoMIPS (lpj=390144)
[17179573.828000] CPU revision is: 00000926 (R10000)
[17179573.828000] FPU revision is: 00000900
[17179573.828000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[17179573.828000] Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
[17179573.828000] Unified secondary cache 4096kB 2-way, linesize 128 bytes.
[17179573.832000] CPU 5 clock is 195MHz.
[17179573.832000] Calibrating delay loop... 195.07 BogoMIPS (lpj=390144)
[17179573.908000] CPU revision is: 00000926 (R10000)
[17179573.908000] FPU revision is: 00000900
[17179573.908000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[17179573.908000] Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
[17179573.908000] Unified secondary cache 4096kB 2-way, linesize 128 bytes.
[17179573.912000] Cpu 6, Nasid 0x3: partnum 0x0 is is xbow
[17179573.912000] CPU 6 clock is 195MHz.
[17179573.912000] Calibrating delay loop... 195.07 BogoMIPS (lpj=390144)
[17179573.988000] CPU revision is: 00000926 (R10000)
[17179573.988000] FPU revision is: 00000900
[17179573.988000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[17179573.988000] Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
[17179573.988000] Unified secondary cache 4096kB 2-way, linesize 128 bytes.
[17179573.992000] CPU 7 clock is 195MHz.
[17179573.992000] Calibrating delay loop... 195.07 BogoMIPS (lpj=390144)
[17179574.068000] Brought up 8 CPUs
[17179574.084000] net_namespace: 1840 bytes
[17179574.088000] regulator: core version 0.5
[17179574.092000] NET: Registered protocol family 16
[17179574.104000] bio: create slab <bio-0> at 0
[17179574.112000] SCSI subsystem initialized
[17179574.116000] usbcore: registered new interface driver usbfs
[17179574.120000] usbcore: registered new interface driver hub
[17179574.124000] usbcore: registered new device driver usb
[17179574.260000] Bluetooth: Core ver 2.14
[17179574.264000] NET: Registered protocol family 31
[17179574.268000] Bluetooth: HCI device and connection manager initialized
[17179574.272000] Bluetooth: HCI socket layer initialized
[17179574.276000] NET: Registered protocol family 8
[17179574.280000] NET: Registered protocol family 20
[17179574.284000] NetLabel: Initializing
[17179574.288000] NetLabel: domain hash size = 128
[17179574.292000] NetLabel: protocols = UNLABELED CIPSOv4
[17179574.296000] NetLabel: unlabeled traffic allowed by default
[17179574.300000] NET: Registered protocol family 2
[17179574.372000] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[17179574.464000] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[17179574.592000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[17179574.684000] TCP: Hash tables configured (established 262144 bind 65536)
[17179574.764000] TCP reno registered
[17179574.816000] NET: Registered protocol family 1
[17179574.872000] audit: initializing netlink socket (disabled)
[17179574.940000] type=2000 audit(5.756:1): initialized
[17179575.020000] VFS: Disk quotas dquot_6.5.2
[17179575.068000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[17179575.156000] fuse init (API version 7.11)
[17179575.208000] JFS: nTxBlock = 8192, nTxLock = 65536
[17179575.308000] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[17179575.436000] SGI XFS Quota Management subsystem
[17179575.492000] Btrfs loaded
[17179575.524000] msgmni has been set to 3268
[17179575.576000] alg: No test for stdrng (krng)
[17179575.628000] io scheduler noop registered
[17179575.676000] io scheduler anticipatory registered
[17179575.736000] io scheduler deadline registered
[17179575.792000] io scheduler cfq registered (default)
[17179575.852000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179575.932000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[17179576.020000] brd: module loaded
[17179576.060000] loop: module loaded
[17179576.100000] Fixed MDIO Bus: probed
[17179576.144000] PPP generic driver version 2.4.2
[17179576.204000] Loading iSCSI transport class v2.0-870.
[17179576.264000] qla1280: QLA1040 found on PCI bus 0, dev 0
[17179576.328000] PCI: Enabling device 0000:00:00.0 (0006 -> 0007)
[17179577.260000] scsi(0:0): Resetting SCSI BUS
[17179580.316000] scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter
[17179580.316000] Firmware version: 7.65.06, Driver version 3.26
[17179580.460000] qla1280: QLA1040 found on PCI bus 0, dev 1
[17179580.524000] PCI: Enabling device 0000:00:01.0 (0006 -> 0007)
[17179580.636000] scsi 0:0:1:0: Direct-Access SGI IBM DGHS18Y 0190 PQ: 0 ANSI: 3
[17179580.736000] scsi(0:0:1:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[17179581.168000] scsi 0:0:2:0: Direct-Access SGI IBM DCHS09Y 3232 PQ: 0 ANSI: 2
[17179581.544000] scsi(0:0:2:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 31
[17179581.652000] scsi(1:0): Resetting SCSI BUS
[17179584.708000] scsi1 : QLogic QLA1040 PCI to SCSI Host Adapter
[17179584.708000] Firmware version: 7.65.06, Driver version 3.26
[17179584.852000] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[17179584.932000] Driver 'st' needs updating - please use bus_type methods
[17179585.012000] Driver 'sd' needs updating - please use bus_type methods
[17179585.092000] sd 0:0:1:0: [sda] 35563040 512-byte hardware sectors: (18.2 GB/16.9 GiB)
[17179585.188000] sd 0:0:1:0: [sda] Write Protect is off
[17179585.252000] sd 0:0:1:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[17179585.356000] sd 0:0:1:0: [sda] 35563040 512-byte hardware sectors: (18.2 GB/16.9 GiB)
[17179585.452000] sd 0:0:1:0: [sda] Write Protect is off
[17179585.516000] sd 0:0:1:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[17179585.620000] sda: sda1 sda2 sda9 sda11
[17179585.688000] sd 0:0:1:0: [sda] Attached SCSI disk
[17179585.820000] sd 0:0:2:0: [sdb] 17781520 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[17179585.976000] sd 0:0:2:0: [sdb] Write Protect is off
[17179586.036000] sd 0:0:2:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[17179586.200000] sd 0:0:2:0: [sdb] 17781520 512-byte hardware sectors: (9.10 GB/8.47 GiB)
[17179586.356000] sd 0:0:2:0: [sdb] Write Protect is off
[17179586.420000] sd 0:0:2:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[17179586.524000] sdb: sdb1 sdb2 sdb9 sdb11
[17179586.584000] sd 0:0:2:0: [sdb] Attached SCSI disk
[17179586.640000] Driver 'sr' needs updating - please use bus_type methods
[17179586.720000] sd 0:0:1:0: Attached scsi generic sg0 type 0
[17179586.788000] sd 0:0:2:0: Attached scsi generic sg1 type 0
[17179586.852000] SCSI Media Changer driver v0.25
[17179586.908000] Driver 'ch' needs updating - please use bus_type methods
[17179586.992000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[17179587.072000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[17179587.152000] uhci_hcd: USB Universal Host Controller Interface driver
[17179587.232000] usbcore: registered new interface driver libusual
[17179587.304000] usbcore: registered new interface driver usbserial
[17179587.376000] USB Serial support registered for generic
[17179587.440000] usbcore: registered new interface driver usbserial_generic
[17179587.520000] usbserial: USB Serial Driver core
[17179587.576000] mice: PS/2 mouse device common for all mice
[17179587.644000] device-mapper: uevent: version 1.0.3
[17179587.704000] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[17179587.808000] device-mapper: multipath: version 1.0.5 loaded
[17179587.876000] device-mapper: multipath round-robin: version 1.0.0 loaded
[17179587.964000] TCP cubic registered
[17179588.008000] NET: Registered protocol family 10
[17179588.068000] lo: Disabled Privacy Extensions
[17179588.124000] NET: Registered protocol family 17
[17179588.180000] Bluetooth: L2CAP ver 2.11
[17179588.228000] Bluetooth: L2CAP socket layer initialized
[17179588.292000] Bluetooth: SCO (Voice Link) ver 0.6
[17179588.348000] Bluetooth: SCO socket layer initialized
[17179588.408000] Bluetooth: RFCOMM socket layer initialized
[17179588.476000] Bluetooth: RFCOMM TTY layer initialized
[17179588.536000] Bluetooth: RFCOMM ver 1.10
[17179588.584000] turn off boot console early0