>>> Messages generated by process 20252 on 2009-02-13 01:23:51 CET for package sys-kernel/gentoo-sources-2.6.27-r8:
LOG: postinst
If you are upgrading from a previous kernel, you may be interested
in the following document:
- General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
>>> Messages generated by process 3109 on 2009-02-13 01:40:26 CET for package app-admin/metalog-0.8-r1:
WARN: postinst
The default metalog.conf file has been moved
from /etc/metalog/metalog.conf to just
/etc/metalog.conf. If you had a standard
setup, the file has been moved for you.
>>> Messages generated by process 6576 on 2009-02-13 01:40:39 CET for package sys-process/cronbase-0.3.2-r1:
LOG: postinst
Portage doesn't enforce proper permissions on already existing
directories (bug 141619). Appropriate permissions are now being set
on //etc/cron.{hourly,daily,weekly,monthly},
//var/spool/cron/ and //var/spool/cron/lastrun/
(see bug 182998)
>>> Messages generated by process 12062 on 2009-02-13 01:41:55 CET for package net-misc/dhcpcd-4.0.7:
LOG: unpack
dhcpcd-3 command line support enabled
LOG: postinst
You have installed dhcpcd with zeroconf support.
This means that it will always obtain an IP address even if no
DHCP server can be contacted, which will break any existing
failover support you may have configured in your net configuration.
This behaviour can be controlled with the -L flag.
See the dhcpcd man page for more details.
>>> Messages generated by process 13237 on 2009-02-13 01:42:47 CET for package sys-boot/grub-0.97-r6:
LOG: preinst
To avoid automounting and autoinstalling with /boot,
just export the DONT_MOUNT_BOOT variable.
LOG: postinst
To interactively install grub files to another device such as a USB
stick, just run the following and specify the directory as prompted:
emerge --config =grub-0.97-r6
Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell
grub where to install in a non-interactive way.
>>> Messages generated by process 15772 on 2009-02-13 04:16:19 CET for package dev-libs/expat-2.0.1-r1:
WARN: postinst
Please note that the soname of the library changed!
If you are upgrading from a previous version you need
to fix dynamic linking inconsistencies by executing:
revdep-rebuild -X --library libexpat.so.0
>>> Messages generated by process 15772 on 2009-02-13 04:17:31 CET for package sys-apps/sandbox-1.2.18.1-r2:
WARN: compile
If configure fails with a 'cannot run C compiled programs' error, try this:
FEATURES=-sandbox emerge sandbox
>>> Messages generated by process 15772 on 2009-02-13 04:18:45 CET for package sys-kernel/linux-headers-2.6.27-r2:
LOG: postinst
Kernel headers are usually only used when recompiling your system libc, as
such, following the installation of newer headers, it is advised that you
re-merge your system libc.
Failure to do so will cause your system libc to not make use of newer
features present in the updated kernel headers.
>>> Messages generated by process 15772 on 2009-02-13 04:20:25 CET for package sys-apps/baselayout-1.12.11.1:
LOG: postinst
The default setting for wiping /tmp has been set to 'yes'.
Consult /etc/conf.d/bootmisc for more information.
>>> Messages generated by process 15772 on 2009-02-13 04:20:40 CET for package sys-fs/udev-124-r1:
LOG: postinst
persistent-net does assigning fixed names to network devices.
If you have problems with the persistent-net rules,
just delete the rules file
rm /etc/udev/rules.d/70-persistent-net.rules
and then reboot.
This may however number your devices in a different way than they are now.
WARN: postinst
If you build an initramfs including udev, then please
make sure that the /sbin/udevadm binary gets included,
as the helper apps udevinfo, udevtrigger, ... are now
only symlinks to udevadm.
mount options for directory /dev are no longer
set in /etc/udev/udev.conf, but in /etc/fstab
as for other directories.
LOG: postinst
For more information on udev on Gentoo, writing udev rules, and
fixing known issues visit:
http://www.gentoo.org/doc/en/udev-guide.xml
>>> Messages generated by process 15772 on 2009-02-13 04:34:44 CET for package sys-apps/util-linux-2.14.1:
WARN: postinst
USE=crypt has been changed to USE=loop-aes. If you need
support for it, make sure to update your USE accordingly.
>>> Messages generated by process 15772 on 2009-02-13 04:46:31 CET for package sys-devel/gcc-4.1.2:
WARN: postinst
If you have issues with packages unable to locate libstdc++.la,
then try running 'fix_libtool_files.sh' on the old gcc versions.
>>> Messages generated by process 15772 on 2009-02-13 05:01:35 CET for package sys-apps/coreutils-6.10-r2:
WARN: postinst
Make sure you run 'hash -r' in your active shells.
>>> Messages generated by process 15772 on 2009-02-13 05:08:52 CET for package dev-libs/openssl-0.9.8j:
WARN: postinst
Due to the way openssl is architected, you cannot
switch between optimized versions without breaking
ABI. The default i686 0.9.8 ABI was an unoptimized
version with horrible performance. This version uses
the optimized ABI. If you experience segfaults when
using ssl apps (like openssh), just re-emerge the
offending package.
>>> Messages generated by process 15772 on 2009-02-13 05:10:34 CET for package dev-lang/python-2.5.2-r7:
WARN: postinst
If you have just upgraded from an older version of python you will
need to run:
/usr/sbin/python-updater
This will automatically rebuild all the python dependent modules
to run with python-2.5.
Your original Python is still installed and can be accessed via
/usr/bin/python2.x.
>>> Messages generated by process 15772 on 2009-02-13 05:10:54 CET for package net-misc/wget-1.11.3:
WARN: preinst
The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
>>> Messages generated by process 15772 on 2009-02-13 05:14:42 CET for package sys-apps/shadow-4.1.2.2:
WARN: postinst
Running 'grpck' returned errors. Please run it by hand, and then
run 'grpconv' afterwards!
>>> Messages generated by process 15772 on 2009-02-13 05:15:31 CET for package sys-apps/busybox-1.12.2-r1:
WARN: unpack
Could not locate user configfile, so we will save a default one
LOG: install
Your configuration for sys-apps/busybox-1.12.2-r1 has been saved in
/etc/portage/savedconfig/sys-apps/busybox-1.12.2-r1 for your editing pleasure.
You can edit these files by hand and remerge this package with
USE=savedconfig to customise the configuration.
You can rename this file/directory to one of the following for
its configuration to apply to multiple versions:
${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
[${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
>>> Messages generated by process 15772 on 2009-02-13 05:16:20 CET for package net-misc/openssh-5.1_p1-r1:
WARN: postinst
Remember to merge your config files in /etc/ssh/ and then
restart sshd: '/etc/init.d/sshd restart'.
Please be aware users need a valid shell in /etc/passwd
in order to be allowed to login.
>>> Messages generated by process 28051 on 2009-02-13 05:18:55 CET for package dev-libs/expat-2.0.1-r1:
WARN: postinst
Please note that the soname of the library changed!
If you are upgrading from a previous version you need
to fix dynamic linking inconsistencies by executing:
revdep-rebuild -X --library libexpat.so.0
>>> Messages generated by process 28051 on 2009-02-13 05:20:01 CET for package sys-apps/sandbox-1.2.18.1-r2:
WARN: compile
If configure fails with a 'cannot run C compiled programs' error, try this:
FEATURES=-sandbox emerge sandbox
>>> Messages generated by process 28051 on 2009-02-13 05:21:05 CET for package sys-kernel/linux-headers-2.6.27-r2:
LOG: postinst
Kernel headers are usually only used when recompiling your system libc, as
such, following the installation of newer headers, it is advised that you
re-merge your system libc.
Failure to do so will cause your system libc to not make use of newer
features present in the updated kernel headers.
>>> Messages generated by process 28051 on 2009-02-13 05:22:45 CET for package sys-apps/baselayout-1.12.11.1:
LOG: postinst
The default setting for wiping /tmp has been set to 'yes'.
Consult /etc/conf.d/bootmisc for more information.
>>> Messages generated by process 28051 on 2009-02-13 05:22:59 CET for package sys-fs/udev-124-r1:
LOG: postinst
persistent-net does assigning fixed names to network devices.
If you have problems with the persistent-net rules,
just delete the rules file
rm /etc/udev/rules.d/70-persistent-net.rules
and then reboot.
This may however number your devices in a different way than they are now.
WARN: postinst
If you build an initramfs including udev, then please
make sure that the /sbin/udevadm binary gets included,
as the helper apps udevinfo, udevtrigger, ... are now
only symlinks to udevadm.
mount options for directory /dev are no longer
set in /etc/udev/udev.conf, but in /etc/fstab
as for other directories.
LOG: postinst
For more information on udev on Gentoo, writing udev rules, and
fixing known issues visit:
http://www.gentoo.org/doc/en/udev-guide.xml
>>> Messages generated by process 28051 on 2009-02-13 05:37:22 CET for package sys-apps/util-linux-2.14.1:
WARN: postinst
USE=crypt has been changed to USE=loop-aes. If you need
support for it, make sure to update your USE accordingly.
>>> Messages generated by process 28051 on 2009-02-13 05:49:09 CET for package sys-devel/gcc-4.1.2:
WARN: postinst
If you have issues with packages unable to locate libstdc++.la,
then try running 'fix_libtool_files.sh' on the old gcc versions.
>>> Messages generated by process 28051 on 2009-02-13 06:04:09 CET for package sys-apps/coreutils-6.10-r2:
WARN: postinst
Make sure you run 'hash -r' in your active shells.
>>> Messages generated by process 28051 on 2009-02-13 06:11:26 CET for package dev-libs/openssl-0.9.8j:
WARN: postinst
Due to the way openssl is architected, you cannot
switch between optimized versions without breaking
ABI. The default i686 0.9.8 ABI was an unoptimized
version with horrible performance. This version uses
the optimized ABI. If you experience segfaults when
using ssl apps (like openssh), just re-emerge the
offending package.
>>> Messages generated by process 28051 on 2009-02-13 06:13:08 CET for package dev-lang/python-2.5.2-r7:
WARN: postinst
If you have just upgraded from an older version of python you will
need to run:
/usr/sbin/python-updater
This will automatically rebuild all the python dependent modules
to run with python-2.5.
Your original Python is still installed and can be accessed via
/usr/bin/python2.x.
>>> Messages generated by process 28051 on 2009-02-13 06:13:27 CET for package net-misc/wget-1.11.3:
WARN: preinst
The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
>>> Messages generated by process 28051 on 2009-02-13 06:17:17 CET for package sys-apps/shadow-4.1.2.2:
WARN: postinst
Running 'grpck' returned errors. Please run it by hand, and then
run 'grpconv' afterwards!
>>> Messages generated by process 28051 on 2009-02-13 06:18:06 CET for package sys-apps/busybox-1.12.2-r1:
WARN: unpack
Could not locate user configfile, so we will save a default one
LOG: install
Your configuration for sys-apps/busybox-1.12.2-r1 has been saved in
/etc/portage/savedconfig/sys-apps/busybox-1.12.2-r1 for your editing pleasure.
You can edit these files by hand and remerge this package with
USE=savedconfig to customise the configuration.
You can rename this file/directory to one of the following for
its configuration to apply to multiple versions:
${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
[${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
>>> Messages generated by process 28051 on 2009-02-13 06:18:54 CET for package net-misc/openssh-5.1_p1-r1:
WARN: postinst
Remember to merge your config files in /etc/ssh/ and then
restart sshd: '/etc/init.d/sshd restart'.
Please be aware users need a valid shell in /etc/passwd
in order to be allowed to login.
>>> Messages generated by process 9317 on 2009-02-13 09:54:43 CET for package app-misc/mc-4.6.1-r4:
LOG: postinst
Add the following line to your ~/.bashrc to
allow mc to chdir to its latest working dir at exit
# Midnight Commander chdir enhancement
if [ -f /usr/share/mc/mc.gentoo ]; then
. /usr/share/mc/mc.gentoo
fi
>>> Messages generated by process 22206 on 2009-02-13 10:10:58 CET for package dev-util/ccache-2.4-r7:
LOG: postinst
To use ccache with **non-Portage** C compiling, add
/usr/lib/ccache/bin to the beginning of your path, before /usr/bin.
Portage 2.0.46-r11+ will automatically take advantage of ccache with
no additional steps. If this is your first install of ccache, type
something like this to set a maximum cache size of 2GB:
# ccache -M 2G
>>> Messages generated by process 24901 on 2009-02-13 10:14:57 CET for package net-nds/openldap-2.3.43:
LOG: postinst
Getting started using OpenLDAP? There is some documentation available:
Gentoo Guide to OpenLDAP Authentication
(http://www.gentoo.org/doc/en/ldap-howto.xml)
An example file for tuning BDB backends with openldap is:
/usr/share/doc/openldap-2.3.43/DB_CONFIG.fast.example.gz
>>> Messages generated by process 24901 on 2009-02-13 10:21:42 CET for package dev-lang/python-2.5.2-r7:
WARN: postinst
If you have just upgraded from an older version of python you will
need to run:
/usr/sbin/python-updater
This will automatically rebuild all the python dependent modules
to run with python-2.5.
Your original Python is still installed and can be accessed via
/usr/bin/python2.x.
>>> Messages generated by process 24901 on 2009-02-13 10:23:52 CET for package net-misc/wget-1.11.3:
WARN: preinst
The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
>>> Messages generated by process 24901 on 2009-02-13 10:36:37 CET for package sys-devel/gcc-4.1.2:
WARN: postinst
If you have issues with packages unable to locate libstdc++.la,
then try running 'fix_libtool_files.sh' on the old gcc versions.
>>> Messages generated by process 24901 on 2009-02-13 10:37:32 CET for package net-misc/openssh-5.1_p1-r1:
WARN: postinst
Remember to merge your config files in /etc/ssh/ and then
restart sshd: '/etc/init.d/sshd restart'.
Please be aware users need a valid shell in /etc/passwd
in order to be allowed to login.
>>> Messages generated by process 4397 on 2009-02-13 10:51:52 CET for package app-misc/mc-4.6.1-r4:
LOG: postinst
Add the following line to your ~/.bashrc to
allow mc to chdir to its latest working dir at exit
# Midnight Commander chdir enhancement
if [ -f /usr/share/mc/mc.gentoo ]; then
. /usr/share/mc/mc.gentoo
fi
>>> Messages generated by process 27229 on 2009-02-13 10:54:58 CET for package media-libs/freetype-2.3.7-r1:
WARN: postinst
After upgrading to freetype-2.3.5, it is necessary to rebuild
libXfont to avoid build errors in some packages.
LOG: postinst
The utilities and demos previously bundled with freetype are now
optional. Enable the utils USE flag if you would like them
to be installed.
>>> Messages generated by process 27229 on 2009-02-13 10:56:10 CET for package sys-apps/dbus-1.2.3-r1:
LOG: postinst
To start the D-Bus system-wide messagebus by default
you should add it to the default runlevel :
`rc-update add dbus default`
Some applications require a session bus in addition to the system
bus. Please see `man dbus-launch` for more information.
WARN: postinst
You MUST run 'revdep-rebuild' after emerging this package
LOG: postinst
WARN: postinst
If you are currently running X with the hal useflag enabled
restarting the dbus service WILL restart X as well
LOG: postinst
WARN: postinst
You must restart D-Bus `/etc/init.d/dbus restart` to run
the new version of the daemon. For many people, this means
exiting X as well.
>>> Messages generated by process 27229 on 2009-02-13 10:57:41 CET for package x11-libs/libXi-1.1.3:
WARN: postinst
Some special keys and keyboard layouts may stop working.
To fix them, recompile xorg-server.
>>> Messages generated by process 27229 on 2009-02-13 11:03:04 CET for package dev-db/sqlite-3.6.6.2:
LOG: postinst
sqlite-3.6.X is not totally backwards compatible, see
http://www.sqlite.org/releaselog/3_6_0.html for full details.
>>> Messages generated by process 27229 on 2009-02-13 11:07:38 CET for package dev-libs/libsigc++-2.2.3:
WARN: postinst
To allow parallel installation of sigc++-1.0, sigc++-1.2, and sigc++2.0
the header files are now installed in a version specific
subdirectory. Be sure to unmerge any libsigc++ versions
< 1.0.4 that you may have previously installed.
>>> Messages generated by process 27229 on 2009-02-13 11:07:50 CET for package sys-apps/pciutils-3.0.2:
LOG: install
Providing a backwards compatibility non-compressed pci.ids
>>> Messages generated by process 27229 on 2009-02-13 11:09:52 CET for package sys-fs/device-mapper-1.02.24-r1:
LOG: postinst
device-mapper volumes are no longer automatically created for
baselayout-2 users. If you are using baselayout-2, be sure to
run: # rc-update add device-mapper boot
>>> Messages generated by process 27229 on 2009-02-13 11:10:04 CET for package app-text/libpaper-1.1.23:
LOG: postinst
run "paperconfig -p letter" as root to use letter-pagesizes
or paperconf with normal user privileges.
>>> Messages generated by process 27229 on 2009-02-13 11:20:02 CET for package dev-libs/libcdio-0.80:
WARN: postinst
If you've upgraded from a previous version of libcdio, you may need to re-emerge
packages that linked against libcdio (vlc, vcdimager and more) by running:
revdep-rebuild
>>> Messages generated by process 27229 on 2009-02-13 11:26:01 CET for package media-libs/alsa-lib-1.0.17a:
WARN: postinst
Starting from alsa 1.0.11_rc3 the configuration for dmix is changed.
Leaving around old asound.conf or ~/.asoundrc might make all apps
using ALSA output crash.
Note that dmix output is enabled by default on the 'default' device
since ALSA 1.0.9.
LOG: postinst
Please try in-kernel ALSA drivers instead of the alsa-drivers ebuild.
If alsa-drivers works for you where a recent kernel does not, we want
to know about this. Our e-mail address is alsa-bugs@gentoo.org
However, if you notice no sound output or instability, please try to
upgrade your kernel to a newer version first.
>>> Messages generated by process 27229 on 2009-02-13 11:26:43 CET for package media-libs/tiff-3.8.2-r4:
LOG: postinst
JBIG support is intended for Hylafax fax compression, so we
really need more feedback in other areas (most testing has
been done with fax). Be sure to recompile anything linked
against tiff if you rebuild it with jbig support.
>>> Messages generated by process 27229 on 2009-02-13 11:32:49 CET for package dev-libs/cyrus-sasl-2.1.22-r2:
WARN: setup
You have both the 'gdbm' and 'berkdb' USE flags enabled.
Will default to GNU DB as your SASLdb database backend.
If you want to build with BerkeleyDB support, hit Control-C now,
change your USE flags -gdbm and emerge again.
Waiting 10 seconds before starting ...
(Control-C to abort) ...
>>> Messages generated by process 27229 on 2009-02-13 11:43:22 CET for package x11-misc/shared-mime-info-0.51:
LOG: postinst
The database format has changed between 0.30 and 0.40.
You may need to update all your local databases and caches.
To do so, please run the following commands:
(for each user) $ update-mime-database ~/.local/share/mime/
(as root) # update-mime-database /usr/local/share/mime/
>>> Messages generated by process 27229 on 2009-02-13 11:46:57 CET for package sys-auth/consolekit-0.2.3:
WARN: postinst
You need to restart ConsoleKit to get the new features.
This can be done with /etc/init.d/consolekit restart
but make sure you do this and then restart your session
otherwise you will get access denied for certain actions
>>> Messages generated by process 27229 on 2009-02-13 11:49:12 CET for package sys-fs/cryptsetup-1.0.5-r1:
WARN: setup
CONFIG_DM_CRYPT: is not set (required for cryptsetup)
Please check to make sure these options are set correctly.
Failure to do so may cause unexpected problems.
WARN: postinst
This ebuild introduces a new set of scripts and configuration
than the last version. If you are currently using /etc/conf.d/cryptfs
then you *MUST* copy your old file to:
/etc/conf.d/dmcrypt
Or your encrypted partitions will *NOT* work.
LOG: postinst
Please see the example for configuring a LUKS mountpoint
in /etc/conf.d/dmcrypt
If you are using baselayout-2 then please do:
rc-update add dmcrypt boot
This version introduces a command line arguement 'key_timeout'.
If you want the search for the removable key device to timeout
after 10 seconds add the following to your bootloader config:
key_timeout=10
A timeout of 0 will mean it will wait indefinitely.
>>> Messages generated by process 27229 on 2009-02-13 11:49:29 CET for package app-admin/sudo-1.7.0:
WARN: postinst
sudo uses the /etc/ldap.conf.sudo file for ldap configuration.
>>> Messages generated by process 27229 on 2009-02-13 11:54:04 CET for package x11-libs/libXdamage-1.1.1:
WARN: postinst
Compositing managers may stop working.
To fix them, recompile xorg-server.
>>> Messages generated by process 27229 on 2009-02-13 11:55:14 CET for package x11-libs/libxklavier-3.6:
WARN: postinst
Please note that the soname of the library changed!
If you are upgrading from a version prior to 3.4 you need
to fix dynamic linking inconsistencies by executing:
revdep-rebuild -X --library libxklavier.so.11
>>> Messages generated by process 27229 on 2009-02-13 11:57:13 CET for package media-libs/gst-plugins-good-0.10.8-r1:
LOG: postinst
The Gstreamer plugins setup has changed quite a bit on Gentoo,
applications now should provide the basic plugins needed.
The new seperate plugins are all named 'gst-plugins-<plugin>'.
To get a listing of currently available plugins execute 'emerge -s gst-plugins-'.
In most cases it shouldn't be needed though to emerge extra plugins.
>>> Messages generated by process 27229 on 2009-02-13 11:58:19 CET for package x11-misc/xdg-utils-1.0.2-r1:
LOG: postinst
Install >=x11-libs/gtk+-2 if you need command gtk-update-icon-cache.
>>> Messages generated by process 27229 on 2009-02-13 11:59:22 CET for package media-libs/gst-plugins-ugly-0.10.8:
LOG: postinst
The Gstreamer plugins setup has changed quite a bit on Gentoo,
applications now should provide the basic plugins needed.
The new seperate plugins are all named 'gst-plugins-<plugin>'.
To get a listing of currently available plugins execute 'emerge -s gst-plugins-'.
In most cases it shouldn't be needed though to emerge extra plugins.
>>> Messages generated by process 27229 on 2009-02-13 12:04:03 CET for package app-cdr/dvd+rw-tools-7.1:
LOG: postinst
When you run growisofs if you receive:
unable to anonymously mmap 33554432: Resource temporarily unavailable
error message please run 'ulimit -l unlimited'
>>> Messages generated by process 27229 on 2009-02-13 12:18:50 CET for package media-libs/fontconfig-2.6.0-r2:
WARN: postinst
Please make fontconfig configuration changes in /etc/fonts/conf.d/
and NOT to /etc/fonts/fonts.conf, as it will be replaced!
>>> Messages generated by process 27229 on 2009-02-13 12:29:53 CET for package x11-base/xorg-server-1.3.0.0-r6:
WARN: setup
Forcing on xorg-x11 for new enough glxtokens.h...
WARN: postinst
Users of reduced blanking now need:
Option "ReducedBlanking"
In the relevant Monitor section(s).
Make sure your reduced blanking modelines are safe!
>>> Messages generated by process 27229 on 2009-02-13 12:30:13 CET for package x11-drivers/xf86-video-openchrome-0.2.903:
LOG: postinst
Supported chipsets:
CLE266 (VT3122)
KM400/P4M800 (VT3205)
K8M800 (VT3204)
PM800/PM880/CN400 (VT3259)
VM800/CN700/P4M800Pro (VT3314)
CX700 (VT3324)
P4M890 (VT3327)
K8M890 (VT3336)
P4M900/VN896 (VT3364)
The driver name is 'openchrome', and this is what you need
to use in your xorg.conf now (instead of 'via').
See the ChangeLog and release notes for more information.
>>> Messages generated by process 27229 on 2009-02-13 12:32:45 CET for package x11-drivers/xf86-video-savage-2.1.2-r1:
LOG: postinst
Direct rendering with kernels <=2.6.18 requires that you use
x11-drm 20060608 or newer rather than the DRM in the kernel.
>>> Messages generated by process 27229 on 2009-02-13 12:36:47 CET for package sys-apps/hal-0.5.11-r1:
LOG: install
Migrating xorg.conf Core Keyboard configuration to HAL FDI file
WARN: install
Failed to migrate your keyboard configuration.
LOG: postinst
The HAL daemon needs to be running for certain applications to
work. Suggested is to add the init script to your start-up
scripts, this should be done like this :
`rc-update add hald default`
Looking for automounting support? Add yourself to the plugdev group
IF you have additional applications which consume ACPI events, you
should consider installing acpid to allow applications to share ACPI
events.
If you wish to use a non US layout, you may do so by executing:
setxkbmap <layout> or by utilizing your Desktop Environment's
Keyboard Layout Settings mechanism.
Under GNOME, this is gnome-keyboard-properties, and under KDE
it is kxkb.
In order have suspend/hibernate function with HAL or apps that use HAL
(such as gnome-power-manager), you should build HAL with the laptop
useflag which will install pm-utils.
X Input Hotplugging (if you build xorg-server with the HAL useflag)
reads user specific configuration from /etc/hal/fdi/policy/.
You should remove the Input sections from your xorg.conf once you have
migrated the rules to a HAL fdi file.
>>> Messages generated by process 27229 on 2009-02-13 12:41:06 CET for package x11-libs/qt-core-4.4.2:
WARN: postinst
After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt
and KDE styles and widgets) can no longer be loaded. In this situation you
should recompile the packages providing these plugins. Also, make sure you
compile the Qt packages, and the packages that depend on it, with the same
GCC version and the same USE flag settings (especially the debug flag).
Packages that typically need to be recompiled are kdelibs from KDE4, any
additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report,
make sure all your Qt4 packages are up-to-date and built with the same
configuration.
For more information, see http://doc.trolltech.com/4.4/plugins-howto.html
>>> Messages generated by process 27229 on 2009-02-13 12:41:39 CET for package x11-libs/qt-test-4.4.2:
WARN: postinst
After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt
and KDE styles and widgets) can no longer be loaded. In this situation you
should recompile the packages providing these plugins. Also, make sure you
compile the Qt packages, and the packages that depend on it, with the same
GCC version and the same USE flag settings (especially the debug flag).
Packages that typically need to be recompiled are kdelibs from KDE4, any
additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report,
make sure all your Qt4 packages are up-to-date and built with the same
configuration.
For more information, see http://doc.trolltech.com/4.4/plugins-howto.html
>>> Messages generated by process 27229 on 2009-02-13 12:42:32 CET for package x11-libs/qt-dbus-4.4.2:
WARN: postinst
After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt
and KDE styles and widgets) can no longer be loaded. In this situation you
should recompile the packages providing these plugins. Also, make sure you
compile the Qt packages, and the packages that depend on it, with the same
GCC version and the same USE flag settings (especially the debug flag).
Packages that typically need to be recompiled are kdelibs from KDE4, any
additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report,
make sure all your Qt4 packages are up-to-date and built with the same
configuration.
For more information, see http://doc.trolltech.com/4.4/plugins-howto.html
>>> Messages generated by process 27229 on 2009-02-13 12:43:45 CET for package x11-libs/qt-script-4.4.2:
WARN: postinst
After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt
and KDE styles and widgets) can no longer be loaded. In this situation you
should recompile the packages providing these plugins. Also, make sure you
compile the Qt packages, and the packages that depend on it, with the same
GCC version and the same USE flag settings (especially the debug flag).
Packages that typically need to be recompiled are kdelibs from KDE4, any
additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report,
make sure all your Qt4 packages are up-to-date and built with the same
configuration.
For more information, see http://doc.trolltech.com/4.4/plugins-howto.html
>>> Messages generated by process 27229 on 2009-02-13 12:44:27 CET for package x11-libs/qt-sql-4.4.2:
WARN: postinst
After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt
and KDE styles and widgets) can no longer be loaded. In this situation you
should recompile the packages providing these plugins. Also, make sure you
compile the Qt packages, and the packages that depend on it, with the same
GCC version and the same USE flag settings (especially the debug flag).
Packages that typically need to be recompiled are kdelibs from KDE4, any
additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report,
make sure all your Qt4 packages are up-to-date and built with the same
configuration.
For more information, see http://doc.trolltech.com/4.4/plugins-howto.html
>>> Messages generated by process 27229 on 2009-02-13 12:45:23 CET for package net-print/cups-1.3.9-r1:
LOG: postinst
For information about installing a printer and general cups setup
take a look at: http://www.gentoo.org/doc/en/printing-howto.xml
WARN: postinst
You need to emerge ghostscript with the "cups" USE flag turned on.
>>> Messages generated by process 27229 on 2009-02-13 12:54:43 CET for package x11-libs/qt-gui-4.4.2-r1:
WARN: postinst
After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt
and KDE styles and widgets) can no longer be loaded. In this situation you
should recompile the packages providing these plugins. Also, make sure you
compile the Qt packages, and the packages that depend on it, with the same
GCC version and the same USE flag settings (especially the debug flag).
Packages that typically need to be recompiled are kdelibs from KDE4, any
additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report,
make sure all your Qt4 packages are up-to-date and built with the same
configuration.
For more information, see http://doc.trolltech.com/4.4/plugins-howto.html
>>> Messages generated by process 27229 on 2009-02-13 12:57:53 CET for package x11-libs/qt-qt3support-4.4.2:
WARN: postinst
After a rebuild or upgrade of Qt, it can happen that Qt plugins (such as Qt
and KDE styles and widgets) can no longer be loaded. In this situation you
should recompile the packages providing these plugins. Also, make sure you
compile the Qt packages, and the packages that depend on it, with the same
GCC version and the same USE flag settings (especially the debug flag).
Packages that typically need to be recompiled are kdelibs from KDE4, any
additional KDE4/Qt4 styles, qscintilla and PyQt4. Before filing a bug report,
make sure all your Qt4 packages are up-to-date and built with the same
configuration.
For more information, see http://doc.trolltech.com/4.4/plugins-howto.html
>>> Messages generated by process 27229 on 2009-02-13 13:02:00 CET for package x11-libs/gtk+-2.12.11:
LOG: postinst
Please install app-text/evince for print preview functionality.
Alternatively, check "gtk-print-preview-command" documentation and
add it to your gtkrc.
>>> Messages generated by process 27229 on 2009-02-13 13:14:09 CET for package app-crypt/pinentry-0.7.5:
LOG: postinst
We no longer install pinentry-curses and pinentry-qt SUID root by default.
Linux kernels >=2.6.9 support memory locking for unprivileged processes.
The soft resource limit for memory locking specifies the limit an
unprivileged process may lock into memory. You can also use POSIX
capabilities to allow pinentry to lock memory. To do so activate the caps
USE flag and add the CAP_IPC_LOCK capability to the permitted set of
your users.
>>> Messages generated by process 27229 on 2009-02-13 13:21:39 CET for package app-crypt/gnupg-2.0.9:
LOG: postinst
If you wish to view images emerge:
media-gfx/xloadimage, media-gfx/xli or any other viewer
Remember to use photo-viewer option in configuration file to activate
the right viewer
>>> Messages generated by process 27229 on 2009-02-13 13:26:05 CET for package app-text/poppler-bindings-0.8.7:
WARN: postinst
You need to rebuild everything depending on poppler, use revdep-rebuild
>>> Messages generated by process 27229 on 2009-02-13 13:36:35 CET for package dev-libs/libgweather-2.22.3:
WARN: postinst
Please run revdep-rebuild after upgrading this package.
>>> Messages generated by process 27229 on 2009-02-13 13:44:47 CET for package gnome-extra/gnome-media-2.22.0:
WARN: postinst
If you cannot play some music format, please check your
USE flags on media-plugins/gst-plugins-meta
>>> Messages generated by process 27229 on 2009-02-13 14:00:12 CET for package net-libs/xulrunner-1.8.1.19:
LOG: postinst
Please remember to rebuild any packages that you have built
against xulrunner. Some packages might be broken by the upgrade; if this
is the case, please search at http://bugs.gentoo.org and open a new bug
if one does not exist.
>>> Messages generated by process 27229 on 2009-02-13 14:01:56 CET for package app-arch/file-roller-2.22.4:
LOG: postinst
file-roller is a frontend for several archiving utility. If you want a
particular achive format support, see http://fileroller.sourceforge.net/
and install the relevant package.
for example:
7-zip - app-arch/p7zip
ace - app-arch/unace
arj - app-arch/arj
lzma - app-arch/lzma
lzop - app-arch/lzop
cpio - app-arch/cpio
iso - app-arch/cdrtools
jar,zip - app-arch/zip and app-arch/unzip
lha - app-arch/lha
rar - app-arch/unrar
rpm - app-arch/rpm
unstuff - app-arch/stuffit
zoo - app-arch/zoo
>>> Messages generated by process 27229 on 2009-02-13 14:06:26 CET for package gnome-extra/gnome-screensaver-2.22.2:
LOG: postinst
Information for converting screensavers is located in
/usr/share/doc/gnome-screensaver-2.22.2/xss-conversion.txt.
>>> Messages generated by process 27229 on 2009-02-13 14:10:14 CET for package media-video/totem-2.22.2-r1:
WARN: postinst
If totem doesn't play some video format, please check your
USE flags on media-plugins/gst-plugins-meta
>>> Messages generated by process 27229 on 2009-02-13 14:13:11 CET for package app-text/aspell-0.60.5:
WARN: compile
Appending a library link instruction (-lgpm); libraries to link to should not be passed through LDFLAGS
LOG: postinst
You will need to install a dictionary now. Please choose an
aspell-<LANG> dictionary from the app-dicts category
After installing an aspell dictionary for your language(s),
You may use the aspell-import utility to import your personal
dictionaries from ispell, pspell and the older aspell
WARN: postinst
Please re-emerge ALL your aspell-LANG dictionaries
>>> Messages generated by process 27229 on 2009-02-13 14:31:34 CET for package mail-client/evolution-2.22.3.1:
LOG: postinst
To change the default browser if you are not using GNOME, do:
gconftool-2 --set /desktop/gnome/url-handlers/http/command -t string 'mozilla %s'
gconftool-2 --set /desktop/gnome/url-handlers/https/command -t string 'mozilla %s'
Replace 'mozilla %s' with which ever browser you use.
Junk filters are now a run-time choice. You will get a choice of
bogofilter or spamassassin based on which you have installed
You have to install one of these for the spam filtering to actually work
>>> Messages generated by process 27229 on 2009-02-13 14:36:32 CET for package media-gfx/imagemagick-6.4.4.6:
LOG: compile
disabling openmp support
>>> Messages generated by process 27229 on 2009-02-13 14:40:03 CET for package gnome-base/nautilus-2.22.5.1-r1:
LOG: postinst
nautilus can use gstreamer to preview audio files. Just make sure
to have the necessary plugins available to play the media type you
want to preview
>>> Messages generated by process 27229 on 2009-02-13 14:44:26 CET for package gnome-base/gnome-applets-2.22.3:
WARN: postinst
//usr/lib/python2.5/site-packages/invest doesn't exist!
>>> Messages generated by process 27229 on 2009-02-13 14:45:37 CET for package gnome-extra/gnome-power-manager-2.22.1:
LOG: postinst
To enable frequency scaling interface, use the following command:
gconftool-2 /apps/gnome-power-manager/ui/cpufreq_show -t bool -s true
Note that this will conflict with other power managment utility
like app-laptop/laptop-mode-tools.
Suspend/hibernate-on-idle will only work if gnome-extra/gnome-screensaver
is installed.
>>> Messages generated by process 27229 on 2009-02-13 14:45:53 CET for package gnome-base/gnome-volume-manager-2.22.5:
LOG: postinst
To start the gnome-volume-manager daemon you need to configure
it through it's preferences capplet. Also the HAL daemon (hald)
needs to be running or it will shut down.
If you experience problems with automounting (windows opened
twice or nothing happening on media insertion) try changing
the status of the automount USE flag.
>>> Messages generated by process 27229 on 2009-02-13 14:51:08 CET for package gnome-base/gdm-2.20.7:
LOG: postinst
To make GDM start at boot, edit /etc/conf.d/xdm
and then execute 'rc-update add xdm default'.
GDM has changed the location of its configuration file. Please
edit /etc/X11/gdm/custom.conf. The factory defaults are located
at /usr/share/gdm/{defaults.conf,factory-defaults.conf}
See README.install for more information about the change.
>>> Messages generated by process 27229 on 2009-02-13 14:51:44 CET for package media-sound/sound-juicer-2.22.0-r1:
WARN: postinst
If sound-juicer does not rip to some music format, please check your
USE flags on media-plugins/gst-plugins-meta
>>> Messages generated by process 27229 on 2009-02-13 14:52:02 CET for package app-admin/sabayon-2.22.1:
LOG: postinst
To apply Sabayon defaults and mandatory settings to all users, put
include "$(HOME)/.gconf.path.mandatory"
in /etc/gconf/2/local-mandatory.path and put
include "$(HOME)/.gconf.path.defaults"
in /etc/gconf/2/local-defaults.path.
You can safely create these files if they do not already exist.
>>> Messages generated by process 27229 on 2009-02-13 14:59:25 CET for package gnome-extra/deskbar-applet-2.22.3.1:
WARN: postinst
The dictionary plugin in deskbar-applet uses the dictionary from
gnome-extra/gnome-utils. If it is not present, the dictionary
plugin will fail silently.
>>> Messages generated by process 27229 on 2009-02-13 15:02:30 CET for package gnome-extra/gnome-games-2.22.3:
WARN: setup
USE='-guile' implies that Aisleriot won't be installed
WARN: postinst
Remember, in order to play games, you have to
be in the 'games' group.
Just run 'gpasswd -a <USER> games', then have <USER> re-login.
>>> Messages generated by process 27229 on 2009-02-13 15:02:34 CET for package gnome-base/gnome-2.22.3:
LOG: postinst
Note that to change windowmanager to metacity do:
export WINDOW_MANAGER="/usr/bin/metacity"
of course this works for all other window managers as well
The main file alteration monitoring functionality is now
provided by >=glib-2.16. Note that on a modern Linux system
you do not need the USE=fam flag on it if you have inotify
support in your linux kernel ( >=2.6.13 ) enabled.
USE=fam on glib is however useful for other situations,
such as Gentoo/FreeBSD systems. A global USE=fam can also
be useful for other packages that do not use the new file
monitoring API yet that the new glib provides.
Add yourself to the plugdev group if you want
automounting to work.
>>> Messages generated by process 3689 on 2009-02-13 15:19:24 CET for package app-portage/gentoolkit-0.2.4.2-r1:
LOG: postinst
The default location for revdep-rebuild files has been moved
to /var/cache/revdep-rebuild when run as root.
Another alternative to equery is app-portage/portage-utils
For further information on gentoolkit, please read the gentoolkit
guide: http://www.gentoo.org/doc/en/gentoolkit.xml
>>> Messages generated by process 3943 on 2009-02-13 23:40:23 CET for package x11-misc/shared-mime-info-0.51:
LOG: postinst
The database format has changed between 0.30 and 0.40.
You may need to update all your local databases and caches.
To do so, please run the following commands:
(for each user) $ update-mime-database ~/.local/share/mime/
(as root) # update-mime-database /usr/local/share/mime/
>>> Messages generated by process 4011 on 2009-02-14 02:40:51 CET for package sys-power/acpid-1.0.6-r1:
LOG: postinst
As of version 1.0.6, acpid uses system log facility instead of custom log
file. This means acpid messages will be usually located in
/var/log/messages (and not in /var/log/acpid) for common setups.
>>> Messages generated by process 4011 on 2009-02-14 02:41:41 CET for package x11-drivers/nvidia-drivers-177.82:
LOG: postinst
You must be in the video group to use the NVIDIA device
For more info, read the docs at
http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6
This ebuild installs a kernel module and X driver. Both must
match explicitly in their version. This means, if you restart
X, you most modprobe -r nvidia before starting it back up
To use the NVIDIA GLX, run "eselect opengl set nvidia"
nVidia has requested that any bug reports submitted have the
output of /usr/bin/nvidia-bug-report.sh included.
To work with compiz, you must enable the AddARGBGLXVisuals option.
If you are having resolution problems, try disabling DynamicTwinView.
>>> Messages generated by process 13650 on 2009-02-15 15:45:15 CET for package media-libs/t1lib-5.0.2-r1:
WARN: postinst
You may have to rebuild other packages depending on t1lib.
You may use revdep-rebuild (from app-portage/gentoolkit)
to do all necessary tricks.
>>> Messages generated by process 13650 on 2009-02-15 15:48:38 CET for package dev-lang/php-5.2.8-r2:
WARN: setup
USE flag 'truetype' needs one of these additional flag(s) set:
gd gd-external
'gd' was automatically selected and enabled.
You can change that by enabling/disabling those flags accordingly
in /etc/portage/package.use.
WARN: postinst
If you have additional third party PHP extensions (such as
dev-php5/phpdbg) you may need to recompile them now.
USE="pic" slows down PHP but has to be enabled on setups where TEXTRELs
are disabled (e.g. when using PaX in the kernel). On hardened profiles this
USE flag is enabled automatically
>>> Messages generated by process 4132 on 2009-02-15 22:05:32 CET for package net-misc/openssh-5.1_p1-r2:
WARN: postinst
Remember to merge your config files in /etc/ssh/ and then
restart sshd: '/etc/init.d/sshd restart'.
Please be aware users need a valid shell in /etc/passwd
in order to be allowed to login.
>>> Messages generated by process 3421 on 2009-02-15 22:09:50 CET for package sys-auth/consolekit-0.2.10:
WARN: postinst
You need to restart ConsoleKit to get the new features.
This can be done with /etc/init.d/consolekit restart
but make sure you do this and then restart your session
otherwise you will get access denied for certain actions
>>> Messages generated by process 4331 on 2009-02-15 23:17:41 CET for package sys-apps/util-linux-2.14.1:
WARN: postinst
The loop-aes code has been split out of USE=crypt and into USE=loop-aes.
If you need support for it, make sure to update your USE accordingly.
>>> Messages generated by process 17530 on 2009-02-15 23:19:15 CET for package sys-apps/util-linux-2.14.1:
WARN: postinst
The loop-aes code has been split out of USE=crypt and into USE=loop-aes.
If you need support for it, make sure to update your USE accordingly.
>>> Messages generated by process 30068 on 2009-02-15 23:21:30 CET for package app-text/poppler-bindings-0.8.7:
WARN: postinst
You need to rebuild everything depending on poppler, use revdep-rebuild
>>> Messages generated by process 4971 on 2009-02-16 01:12:57 CET for package dev-libs/expat-2.0.1-r1:
WARN: postinst
Please note that the soname of the library changed!
If you are upgrading from a previous version you need
to fix dynamic linking inconsistencies by executing:
revdep-rebuild -X --library libexpat.so.0
>>> Messages generated by process 4971 on 2009-02-16 01:13:40 CET for package sys-apps/sandbox-1.2.18.1-r2:
WARN: compile
If configure fails with a 'cannot run C compiled programs' error, try this:
FEATURES=-sandbox emerge sandbox
>>> Messages generated by process 4971 on 2009-02-16 01:15:31 CET for package sys-kernel/linux-headers-2.6.27-r2:
LOG: postinst
Kernel headers are usually only used when recompiling your system libc, as
such, following the installation of newer headers, it is advised that you
re-merge your system libc.
Failure to do so will cause your system libc to not make use of newer
features present in the updated kernel headers.
>>> Messages generated by process 4971 on 2009-02-16 01:17:38 CET for package sys-apps/baselayout-1.12.11.1:
LOG: postinst
The default setting for wiping /tmp has been set to 'yes'.
Consult /etc/conf.d/bootmisc for more information.
>>> Messages generated by process 4971 on 2009-02-16 01:17:55 CET for package sys-fs/udev-124-r1:
LOG: postinst
persistent-net does assigning fixed names to network devices.
If you have problems with the persistent-net rules,
just delete the rules file
rm /etc/udev/rules.d/70-persistent-net.rules
and then reboot.
This may however number your devices in a different way than they are now.
WARN: postinst
If you build an initramfs including udev, then please
make sure that the /sbin/udevadm binary gets included,
as the helper apps udevinfo, udevtrigger, ... are now
only symlinks to udevadm.
mount options for directory /dev are no longer
set in /etc/udev/udev.conf, but in /etc/fstab
as for other directories.
LOG: postinst
For more information on udev on Gentoo, writing udev rules, and
fixing known issues visit:
http://www.gentoo.org/doc/en/udev-guide.xml
>>> Messages generated by process 4971 on 2009-02-16 01:45:22 CET for package dev-libs/openssl-0.9.8j:
WARN: postinst
Due to the way openssl is architected, you cannot
switch between optimized versions without breaking
ABI. The default i686 0.9.8 ABI was an unoptimized
version with horrible performance. This version uses
the optimized ABI. If you experience segfaults when
using ssl apps (like openssh), just re-emerge the
offending package.
>>> Messages generated by process 4971 on 2009-02-16 01:45:38 CET for package net-misc/wget-1.11.3:
WARN: preinst
The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
>>> Messages generated by process 4971 on 2009-02-16 01:50:04 CET for package sys-apps/coreutils-6.10-r2:
WARN: postinst
Make sure you run 'hash -r' in your active shells.
>>> Messages generated by process 4971 on 2009-02-16 01:52:33 CET for package net-nds/openldap-2.3.43:
LOG: postinst
Getting started using OpenLDAP? There is some documentation available:
Gentoo Guide to OpenLDAP Authentication
(http://www.gentoo.org/doc/en/ldap-howto.xml)
An example file for tuning BDB backends with openldap is:
/usr/share/doc/openldap-2.3.43/DB_CONFIG.fast.example.gz
>>> Messages generated by process 4971 on 2009-02-16 01:56:28 CET for package dev-lang/python-2.5.2-r7:
WARN: postinst
If you have just upgraded from an older version of python you will
need to run:
/usr/sbin/python-updater
This will automatically rebuild all the python dependent modules
to run with python-2.5.
Your original Python is still installed and can be accessed via
/usr/bin/python2.x.
>>> Messages generated by process 4971 on 2009-02-16 02:02:13 CET for package sys-apps/util-linux-2.14.1:
WARN: postinst
The loop-aes code has been split out of USE=crypt and into USE=loop-aes.
If you need support for it, make sure to update your USE accordingly.
>>> Messages generated by process 4971 on 2009-02-16 02:04:23 CET for package sys-apps/busybox-1.12.2-r1:
WARN: unpack
Could not locate user configfile, so we will save a default one
LOG: install
Your configuration for sys-apps/busybox-1.12.2-r1 has been saved in
/etc/portage/savedconfig/sys-apps/busybox-1.12.2-r1 for your editing pleasure.
You can edit these files by hand and remerge this package with
USE=savedconfig to customise the configuration.
You can rename this file/directory to one of the following for
its configuration to apply to multiple versions:
${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
[${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
>>> Messages generated by process 4971 on 2009-02-16 02:05:10 CET for package net-misc/openssh-5.1_p1-r2:
WARN: postinst
Remember to merge your config files in /etc/ssh/ and then
restart sshd: '/etc/init.d/sshd restart'.
Please be aware users need a valid shell in /etc/passwd
in order to be allowed to login.
>>> Messages generated by process 4971 on 2009-02-16 02:16:54 CET for package sys-devel/gcc-4.1.2:
WARN: postinst
If you have issues with packages unable to locate libstdc++.la,
then try running 'fix_libtool_files.sh' on the old gcc versions.
>>> Messages generated by process 4433 on 2009-02-16 02:29:44 CET for package dev-libs/expat-2.0.1-r1:
WARN: postinst
Please note that the soname of the library changed!
If you are upgrading from a previous version you need
to fix dynamic linking inconsistencies by executing:
revdep-rebuild -X --library libexpat.so.0
>>> Messages generated by process 4433 on 2009-02-16 02:30:24 CET for package sys-apps/sandbox-1.2.18.1-r2:
WARN: compile
If configure fails with a 'cannot run C compiled programs' error, try this:
FEATURES=-sandbox emerge sandbox
>>> Messages generated by process 4433 on 2009-02-16 02:32:07 CET for package sys-kernel/linux-headers-2.6.27-r2:
LOG: postinst
Kernel headers are usually only used when recompiling your system libc, as
such, following the installation of newer headers, it is advised that you
re-merge your system libc.
Failure to do so will cause your system libc to not make use of newer
features present in the updated kernel headers.
>>> Messages generated by process 4433 on 2009-02-16 02:33:58 CET for package sys-apps/baselayout-1.12.11.1:
LOG: postinst
The default setting for wiping /tmp has been set to 'yes'.
Consult /etc/conf.d/bootmisc for more information.
>>> Messages generated by process 4433 on 2009-02-16 02:34:14 CET for package sys-fs/udev-124-r1:
LOG: postinst
persistent-net does assigning fixed names to network devices.
If you have problems with the persistent-net rules,
just delete the rules file
rm /etc/udev/rules.d/70-persistent-net.rules
and then reboot.
This may however number your devices in a different way than they are now.
WARN: postinst
If you build an initramfs including udev, then please
make sure that the /sbin/udevadm binary gets included,
as the helper apps udevinfo, udevtrigger, ... are now
only symlinks to udevadm.
mount options for directory /dev are no longer
set in /etc/udev/udev.conf, but in /etc/fstab
as for other directories.
LOG: postinst
For more information on udev on Gentoo, writing udev rules, and
fixing known issues visit:
http://www.gentoo.org/doc/en/udev-guide.xml
>>> Messages generated by process 4433 on 2009-02-16 03:00:43 CET for package dev-libs/openssl-0.9.8j:
WARN: postinst
Due to the way openssl is architected, you cannot
switch between optimized versions without breaking
ABI. The default i686 0.9.8 ABI was an unoptimized
version with horrible performance. This version uses
the optimized ABI. If you experience segfaults when
using ssl apps (like openssh), just re-emerge the
offending package.
>>> Messages generated by process 4433 on 2009-02-16 03:01:00 CET for package net-misc/wget-1.11.3:
WARN: preinst
The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
>>> Messages generated by process 4433 on 2009-02-16 03:05:26 CET for package sys-apps/coreutils-6.10-r2:
WARN: postinst
Make sure you run 'hash -r' in your active shells.
>>> Messages generated by process 4433 on 2009-02-16 03:07:55 CET for package net-nds/openldap-2.3.43:
LOG: postinst
Getting started using OpenLDAP? There is some documentation available:
Gentoo Guide to OpenLDAP Authentication
(http://www.gentoo.org/doc/en/ldap-howto.xml)
An example file for tuning BDB backends with openldap is:
/usr/share/doc/openldap-2.3.43/DB_CONFIG.fast.example.gz
>>> Messages generated by process 4433 on 2009-02-16 03:11:53 CET for package dev-lang/python-2.5.2-r7:
WARN: postinst
If you have just upgraded from an older version of python you will
need to run:
/usr/sbin/python-updater
This will automatically rebuild all the python dependent modules
to run with python-2.5.
Your original Python is still installed and can be accessed via
/usr/bin/python2.x.
>>> Messages generated by process 4433 on 2009-02-16 03:17:49 CET for package sys-apps/util-linux-2.14.1:
WARN: postinst
The loop-aes code has been split out of USE=crypt and into USE=loop-aes.
If you need support for it, make sure to update your USE accordingly.
>>> Messages generated by process 4433 on 2009-02-16 03:20:10 CET for package sys-apps/busybox-1.12.2-r1:
WARN: unpack
Could not locate user configfile, so we will save a default one
LOG: install
Your configuration for sys-apps/busybox-1.12.2-r1 has been saved in
/etc/portage/savedconfig/sys-apps/busybox-1.12.2-r1 for your editing pleasure.
You can edit these files by hand and remerge this package with
USE=savedconfig to customise the configuration.
You can rename this file/directory to one of the following for
its configuration to apply to multiple versions:
${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
[${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
>>> Messages generated by process 4433 on 2009-02-16 03:21:07 CET for package net-misc/openssh-5.1_p1-r2:
WARN: postinst
Remember to merge your config files in /etc/ssh/ and then
restart sshd: '/etc/init.d/sshd restart'.
Please be aware users need a valid shell in /etc/passwd
in order to be allowed to login.
>>> Messages generated by process 4433 on 2009-02-16 03:32:52 CET for package sys-devel/gcc-4.1.2:
WARN: postinst
If you have issues with packages unable to locate libstdc++.la,
then try running 'fix_libtool_files.sh' on the old gcc versions.
>>> Messages generated by process 15193 on 2009-02-16 03:44:18 CET for package dev-libs/expat-2.0.1-r1:
WARN: postinst
Please note that the soname of the library changed!
If you are upgrading from a previous version you need
to fix dynamic linking inconsistencies by executing:
revdep-rebuild -X --library libexpat.so.0
>>> Messages generated by process 15193 on 2009-02-16 03:49:27 CET for package dev-db/sqlite-3.6.6.2:
LOG: postinst
sqlite-3.6.X is not totally backwards compatible, see
http://www.sqlite.org/releaselog/3_6_0.html for full details.
>>> Messages generated by process 15193 on 2009-02-16 03:49:48 CET for package dev-libs/libsigc++-2.2.3:
WARN: postinst
To allow parallel installation of sigc++-1.0, sigc++-1.2, and sigc++2.0
the header files are now installed in a version specific
subdirectory. Be sure to unmerge any libsigc++ versions
< 1.0.4 that you may have previously installed.
>>> Messages generated by process 15193 on 2009-02-16 03:50:56 CET for package app-text/libpaper-1.1.23:
LOG: postinst
run "paperconfig -p letter" as root to use letter-pagesizes
or paperconf with normal user privileges.
>>> Messages generated by process 15193 on 2009-02-16 03:51:47 CET for package sys-fs/device-mapper-1.02.24-r1:
LOG: postinst
device-mapper volumes are no longer automatically created for
baselayout-2 users. If you are using baselayout-2, be sure to
run: # rc-update add device-mapper boot
>>> Messages generated by process 15193 on 2009-02-16 03:53:50 CET for package sys-apps/sandbox-1.2.18.1-r2:
WARN: compile
If configure fails with a 'cannot run C compiled programs' error, try this:
FEATURES=-sandbox emerge sandbox
>>> Messages generated by process 15193 on 2009-02-16 03:54:38 CET for package sys-process/cronbase-0.3.2-r1:
LOG: postinst
Portage doesn't enforce proper permissions on already existing
directories (bug 141619). Appropriate permissions are now being set
on //etc/cron.{hourly,daily,weekly,monthly},
//var/spool/cron/ and //var/spool/cron/lastrun/
(see bug 182998)
>>> Messages generated by process 15193 on 2009-02-16 03:54:56 CET for package net-misc/dhcpcd-4.0.7:
LOG: unpack
dhcpcd-3 command line support enabled
LOG: postinst
You have installed dhcpcd with zeroconf support.
This means that it will always obtain an IP address even if no
DHCP server can be contacted, which will break any existing
failover support you may have configured in your net configuration.
This behaviour can be controlled with the -L flag.
See the dhcpcd man page for more details.
>>> Messages generated by process 15193 on 2009-02-16 03:56:02 CET for package sys-kernel/linux-headers-2.6.27-r2:
LOG: postinst
Kernel headers are usually only used when recompiling your system libc, as
such, following the installation of newer headers, it is advised that you
re-merge your system libc.
Failure to do so will cause your system libc to not make use of newer
features present in the updated kernel headers.
>>> Messages generated by process 15193 on 2009-02-16 03:56:57 CET for package sys-apps/pciutils-3.0.2:
LOG: install
Providing a backwards compatibility non-compressed pci.ids
>>> Messages generated by process 15193 on 2009-02-16 04:01:49 CET for package app-admin/metalog-0.8-r1:
WARN: postinst
The default metalog.conf file has been moved
from /etc/metalog/metalog.conf to just
/etc/metalog.conf. If you had a standard
setup, the file has been moved for you.
>>> Messages generated by process 15193 on 2009-02-16 04:02:38 CET for package sys-fs/udev-124-r1:
LOG: postinst
persistent-net does assigning fixed names to network devices.
If you have problems with the persistent-net rules,
just delete the rules file
rm /etc/udev/rules.d/70-persistent-net.rules
and then reboot.
This may however number your devices in a different way than they are now.
WARN: postinst
If you build an initramfs including udev, then please
make sure that the /sbin/udevadm binary gets included,
as the helper apps udevinfo, udevtrigger, ... are now
only symlinks to udevadm.
mount options for directory /dev are no longer
set in /etc/udev/udev.conf, but in /etc/fstab
as for other directories.
LOG: postinst
For more information on udev on Gentoo, writing udev rules, and
fixing known issues visit:
http://www.gentoo.org/doc/en/udev-guide.xml
>>> Messages generated by process 15193 on 2009-02-16 04:02:46 CET for package sys-apps/baselayout-1.12.11.1:
LOG: postinst
The default setting for wiping /tmp has been set to 'yes'.
Consult /etc/conf.d/bootmisc for more information.
>>> Messages generated by process 15193 on 2009-02-16 04:03:22 CET for package x11-misc/xdg-utils-1.0.2-r1:
LOG: postinst
Install >=x11-libs/gtk+-2 if you need command gtk-update-icon-cache.
>>> Messages generated by process 15193 on 2009-02-16 04:05:54 CET for package media-libs/tiff-3.8.2-r4:
LOG: postinst
JBIG support is intended for Hylafax fax compression, so we
really need more feedback in other areas (most testing has
been done with fax). Be sure to recompile anything linked
against tiff if you rebuild it with jbig support.
>>> Messages generated by process 15193 on 2009-02-16 04:08:45 CET for package dev-util/ccache-2.4-r7:
LOG: postinst
To use ccache with **non-Portage** C compiling, add
/usr/lib/ccache/bin to the beginning of your path, before /usr/bin.
Portage 2.0.46-r11+ will automatically take advantage of ccache with
no additional steps. If this is your first install of ccache, type
something like this to set a maximum cache size of 2GB:
# ccache -M 2G
>>> Messages generated by process 15193 on 2009-02-16 04:10:41 CET for package sys-power/acpid-1.0.6-r1:
LOG: postinst
As of version 1.0.6, acpid uses system log facility instead of custom log
file. This means acpid messages will be usually located in
/var/log/messages (and not in /var/log/acpid) for common setups.
>>> Messages generated by process 15193 on 2009-02-16 04:24:02 CET for package media-libs/freetype-2.3.7-r1:
WARN: postinst
After upgrading to freetype-2.3.5, it is necessary to rebuild
libXfont to avoid build errors in some packages.
LOG: postinst
The utilities and demos previously bundled with freetype are now
optional. Enable the utils USE flag if you would like them
to be installed.
>>> Messages generated by process 15193 on 2009-02-16 04:26:40 CET for package sys-apps/dbus-1.2.3-r1:
LOG: postinst
To start the D-Bus system-wide messagebus by default
you should add it to the default runlevel :
`rc-update add dbus default`
Some applications require a session bus in addition to the system
bus. Please see `man dbus-launch` for more information.
WARN: postinst
You MUST run 'revdep-rebuild' after emerging this package
LOG: postinst
WARN: postinst
If you are currently running X with the hal useflag enabled
restarting the dbus service WILL restart X as well
LOG: postinst
WARN: postinst
You must restart D-Bus `/etc/init.d/dbus restart` to run
the new version of the daemon. For many people, this means
exiting X as well.
>>> Messages generated by process 15193 on 2009-02-16 04:27:00 CET for package x11-libs/libXi-1.1.3:
WARN: postinst
Some special keys and keyboard layouts may stop working.
To fix them, recompile xorg-server.
>>> Messages generated by process 15193 on 2009-02-16 04:30:11 CET for package x11-libs/libXdamage-1.1.1:
WARN: postinst
Compositing managers may stop working.
To fix them, recompile xorg-server.
>>> Messages generated by process 15193 on 2009-02-16 04:45:15 CET for package sys-kernel/gentoo-sources-2.6.27-r8:
LOG: postinst
If you are upgrading from a previous kernel, you may be interested
in the following document:
- General upgrade guide: http://www.gentoo.org/doc/en/kernel-upgrade.xml
>>> Messages generated by process 15193 on 2009-02-16 04:53:34 CET for package dev-libs/libcdio-0.80:
WARN: postinst
If you've upgraded from a previous version of libcdio, you may need to re-emerge
packages that linked against libcdio (vlc, vcdimager and more) by running:
revdep-rebuild
>>> Messages generated by process 15193 on 2009-02-16 04:59:04 CET for package sys-fs/cryptsetup-1.0.5-r1:
WARN: setup
CONFIG_DM_CRYPT: is not set (required for cryptsetup)
Please check to make sure these options are set correctly.
Failure to do so may cause unexpected problems.
WARN: postinst
This ebuild introduces a new set of scripts and configuration
than the last version. If you are currently using /etc/conf.d/cryptfs
then you *MUST* copy your old file to:
/etc/conf.d/dmcrypt
Or your encrypted partitions will *NOT* work.
LOG: postinst
Please see the example for configuring a LUKS mountpoint
in /etc/conf.d/dmcrypt
If you are using baselayout-2 then please do:
rc-update add dmcrypt boot
This version introduces a command line arguement 'key_timeout'.
If you want the search for the removable key device to timeout
after 10 seconds add the following to your bootloader config:
key_timeout=10
A timeout of 0 will mean it will wait indefinitely.
>>> Messages generated by process 15193 on 2009-02-16 05:02:11 CET for package dev-libs/openssl-0.9.8j:
WARN: postinst
Due to the way openssl is architected, you cannot
switch between optimized versions without breaking
ABI. The default i686 0.9.8 ABI was an unoptimized
version with horrible performance. This version uses
the optimized ABI. If you experience segfaults when
using ssl apps (like openssh), just re-emerge the
offending package.
>>> Messages generated by process 15193 on 2009-02-16 05:02:54 CET for package net-misc/wget-1.11.3:
WARN: preinst
The /etc/wget/wgetrc file has been relocated to /etc/wgetrc
>>> Messages generated by process 15193 on 2009-02-16 05:14:11 CET for package x11-libs/gtk+-2.12.11:
LOG: postinst
Please install app-text/evince for print preview functionality.
Alternatively, check "gtk-print-preview-command" documentation and
add it to your gtkrc.
>>> Messages generated by process 15193 on 2009-02-16 05:19:47 CET for package x11-misc/shared-mime-info-0.51:
LOG: postinst
The database format has changed between 0.30 and 0.40.
You may need to update all your local databases and caches.
To do so, please run the following commands:
(for each user) $ update-mime-database ~/.local/share/mime/
(as root) # update-mime-database /usr/local/share/mime/
>>> Messages generated by process 15193 on 2009-02-16 05:27:52 CET for package media-libs/gst-plugins-good-0.10.8-r1:
LOG: postinst
The Gstreamer plugins setup has changed quite a bit on Gentoo,
applications now should provide the basic plugins needed.
The new seperate plugins are all named 'gst-plugins-<plugin>'.
To get a listing of currently available plugins execute 'emerge -s gst-plugins-'.
In most cases it shouldn't be needed though to emerge extra plugins.
>>> Messages generated by process 15193 on 2009-02-16 05:29:43 CET for package media-libs/gst-plugins-ugly-0.10.8:
LOG: postinst
The Gstreamer plugins setup has changed quite a bit on Gentoo,
applications now should provide the basic plugins needed.
The new seperate plugins are all named 'gst-plugins-<plugin>'.
To get a listing of currently available plugins execute 'emerge -s gst-plugins-'.
In most cases it shouldn't be needed though to emerge extra plugins.
>>> Messages generated by process 15193 on 2009-02-16 05:37:57 CET for package dev-lang/python-2.5.2-r7:
WARN: postinst
If you have just upgraded from an older version of python you will
need to run:
/usr/sbin/python-updater
This will automatically rebuild all the python dependent modules
to run with python-2.5.
Your original Python is still installed and can be accessed via
/usr/bin/python2.x.
>>> Messages generated by process 15193 on 2009-02-16 05:39:28 CET for package media-libs/alsa-lib-1.0.17a:
WARN: postinst
Starting from alsa 1.0.11_rc3 the configuration for dmix is changed.
Leaving around old asound.conf or ~/.asoundrc might make all apps
using ALSA output crash.
Note that dmix output is enabled by default on the 'default' device
since ALSA 1.0.9.
LOG: postinst
Please try in-kernel ALSA drivers instead of the alsa-drivers ebuild.
If alsa-drivers works for you where a recent kernel does not, we want
to know about this. Our e-mail address is alsa-bugs@gentoo.org
However, if you notice no sound output or instability, please try to
upgrade your kernel to a newer version first.
>>> Messages generated by process 15193 on 2009-02-16 05:42:48 CET for package app-portage/gentoolkit-0.2.4.2-r1:
LOG: postinst
The default location for revdep-rebuild files has been moved
to /var/cache/revdep-rebuild when run as root.
Another alternative to equery is app-portage/portage-utils
For further information on gentoolkit, please read the gentoolkit
guide: http://www.gentoo.org/doc/en/gentoolkit.xml
>>> Messages generated by process 15193 on 2009-02-16 05:44:23 CET for package x11-libs/libxklavier-3.6:
WARN: postinst
Please note that the soname of the library changed!
If you are upgrading from a version prior to 3.4 you need
to fix dynamic linking inconsistencies by executing:
revdep-rebuild -X --library libxklavier.so.11
>>> Messages generated by process 15193 on 2009-02-16 05:47:09 CET for package sys-auth/consolekit-0.2.10:
WARN: postinst
You need to restart ConsoleKit to get the new features.
This can be done with /etc/init.d/consolekit restart
but make sure you do this and then restart your session
otherwise you will get access denied for certain actions
>>> Messages generated by process 15193 on 2009-02-16 05:49:26 CET for package sys-apps/busybox-1.12.2-r1:
WARN: unpack
Could not locate user configfile, so we will save a default one
LOG: install
Your configuration for sys-apps/busybox-1.12.2-r1 has been saved in
/etc/portage/savedconfig/sys-apps/busybox-1.12.2-r1 for your editing pleasure.
You can edit these files by hand and remerge this package with
USE=savedconfig to customise the configuration.
You can rename this file/directory to one of the following for
its configuration to apply to multiple versions:
${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
[${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
>>> Messages generated by process 15193 on 2009-02-16 05:55:52 CET for package x11-base/xorg-server-1.3.0.0-r6:
WARN: setup
Forcing on xorg-x11 for new enough glxtokens.h...
WARN: postinst
Users of reduced blanking now need:
Option "ReducedBlanking"
In the relevant Monitor section(s).
Make sure your reduced blanking modelines are safe!
>>> Messages generated by process 15193 on 2009-02-16 05:57:43 CET for package x11-drivers/xf86-video-openchrome-0.2.903:
LOG: postinst
Supported chipsets:
CLE266 (VT3122)
KM400/P4M800 (VT3205)
K8M800 (VT3204)
PM800/PM880/CN400 (VT3259)
VM800/CN700/P4M800Pro (VT3314)
CX700 (VT3324)
P4M890 (VT3327)
K8M890 (VT3336)
P4M900/VN896 (VT3364)
The driver name is 'openchrome', and this is what you need
to use in your xorg.conf now (instead of 'via').
See the ChangeLog and release notes for more information.
>>> Messages generated by process 15193 on 2009-02-16 05:58:00 CET for package x11-drivers/xf86-video-savage-2.1.2-r1:
LOG: postinst
Direct rendering with kernels <=2.6.18 requires that you use
x11-drm 20060608 or newer rather than the DRM in the kernel.
>>> Messages generated by process 15193 on 2009-02-16 06:03:48 CET for package x11-drivers/nvidia-drivers-177.82:
LOG: postinst
You must be in the video group to use the NVIDIA device
For more info, read the docs at
http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6
This ebuild installs a kernel module and X driver. Both must
match explicitly in their version. This means, if you restart
X, you most modprobe -r nvidia before starting it back up
To use the NVIDIA GLX, run "eselect opengl set nvidia"
nVidia has requested that any bug reports submitted have the
output of /usr/bin/nvidia-bug-report.sh included.
To work with compiz, you must enable the AddARGBGLXVisuals option.
If you are having resolution problems, try disabling DynamicTwinView.
>>> Messages generated by process 15193 on 2009-02-16 06:16:05 CET for package net-nds/openldap-2.3.43:
LOG: postinst
Getting started using OpenLDAP? There is some documentation available:
Gentoo Guide to OpenLDAP Authentication
(http://www.gentoo.org/doc/en/ldap-howto.xml)
An example file for tuning BDB backends with openldap is:
/usr/share/doc/openldap-2.3.43/DB_CONFIG.fast.example.gz
>>> Messages generated by process 15193 on 2009-02-16 06:19:21 CET for package sys-apps/coreutils-6.10-r2:
WARN: postinst
Make sure you run 'hash -r' in your active shells.
>>> Messages generated by process 15193 on 2009-02-16 06:21:07 CET for package app-crypt/pinentry-0.7.5:
LOG: postinst
We no longer install pinentry-curses and pinentry-qt SUID root by default.
Linux kernels >=2.6.9 support memory locking for unprivileged processes.
The soft resource limit for memory locking specifies the limit an
unprivileged process may lock into memory. You can also use POSIX
capabilities to allow pinentry to lock memory. To do so activate the caps
USE flag and add the CAP_IPC_LOCK capability to the permitted set of
your users.
>>> Messages generated by process 15193 on 2009-02-16 06:21:57 CET for package sys-boot/grub-0.97-r6:
LOG: preinst
To avoid automounting and autoinstalling with /boot,
just export the DONT_MOUNT_BOOT variable.
WARN: postinst
*** IMPORTANT NOTE: you must run grub and install
the new version's stage1 to your MBR. Until you do,
stage1 and stage2 will still be the old version, but
later stages will be the new version, which could
cause problems such as an unbootable system.
This means you must use either grub-install or perform
root/setup manually! For more help, see the handbook:
http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=10#grub-install-auto
LOG: postinst
To interactively install grub files to another device such as a USB
stick, just run the following and specify the directory as prompted:
emerge --config =grub-0.97-r6
Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell
grub where to install in a non-interactive way.
>>> Messages generated by process 15193 on 2009-02-16 06:23:35 CET for package net-misc/openssh-5.1_p1-r2:
WARN: postinst
Remember to merge your config files in /etc/ssh/ and then
restart sshd: '/etc/init.d/sshd restart'.
Please be aware users need a valid shell in /etc/passwd
in order to be allowed to login.
>>> Messages generated by process 15193 on 2009-02-16 06:27:25 CET for package dev-libs/cyrus-sasl-2.1.22-r2:
WARN: setup
You have both the 'gdbm' and 'berkdb' USE flags enabled.
Will default to GNU DB as your SASLdb database backend.
If you want to build with BerkeleyDB support, hit Control-C now,
change your USE flags -gdbm and emerge again.
Waiting 10 seconds before starting ...
(Control-C to abort) ...
>>> Messages generated by process 15193 on 2009-02-16 06:30:18 CET for package media-libs/fontconfig-2.6.0-r2:
WARN: postinst
Please make fontconfig configuration changes in /etc/fonts/conf.d/
and NOT to /etc/fonts/fonts.conf, as it will be replaced!
>>> Messages generated by process 15193 on 2009-02-16 06:33:12 CET for package app-admin/sudo-1.7.0:
WARN: postinst
sudo uses the /etc/ldap.conf.sudo file for ldap configuration.
>>> Messages generated by process 15193 on 2009-02-16 06:38:37 CET for package app-text/docbook-xml-dtd-4.1.2-r6:
WARN: postrm
/etc/sgml/sgml-docbook.cat still exists! Not removing from /etc/sgml/xml-docbook-4.1.2.cat
This is normal behavior for an upgrade ...
/usr/share/sgml/docbook/xml-dtd-4.1.2/docbook.cat still exists! Not removing from /etc/sgml/xml-docbook-4.1.2.cat
This is normal behavior for an upgrade ...
>>> Messages generated by process 15193 on 2009-02-16 06:42:36 CET for package app-text/docbook-xml-dtd-4.4-r1:
WARN: postrm
/etc/sgml/sgml-docbook.cat still exists! Not removing from /etc/sgml/xml-docbook-4.4.cat
This is normal behavior for an upgrade ...
/usr/share/sgml/docbook/xml-dtd-4.4/docbook.cat still exists! Not removing from /etc/sgml/xml-docbook-4.4.cat
This is normal behavior for an upgrade ...
>>> Messages generated by process 15193 on 2009-02-16 06:43:51 CET for package media-libs/t1lib-5.0.2-r1:
WARN: postinst
You may have to rebuild other packages depending on t1lib.
You may use revdep-rebuild (from app-portage/gentoolkit)
to do all necessary tricks.
>>> Messages generated by process 15193 on 2009-02-16 06:45:16 CET for package sys-apps/util-linux-2.14.1:
WARN: postinst
The loop-aes code has been split out of USE=crypt and into USE=loop-aes.
If you need support for it, make sure to update your USE accordingly.
>>> Messages generated by process 15193 on 2009-02-16 06:51:29 CET for package app-text/poppler-bindings-0.8.7:
WARN: postinst
You need to rebuild everything depending on poppler, use revdep-rebuild
>>> Messages generated by process 15193 on 2009-02-16 06:52:26 CET for package app-misc/mc-4.6.1-r4:
LOG: postinst
Add the following line to your ~/.bashrc to
allow mc to chdir to its latest working dir at exit
# Midnight Commander chdir enhancement
if [ -f /usr/share/mc/mc.gentoo ]; then
. /usr/share/mc/mc.gentoo
fi
>>> Messages generated by process 15193 on 2009-02-16 07:01:23 CET for package app-cdr/dvd+rw-tools-7.1:
LOG: postinst
When you run growisofs if you receive:
unable to anonymously mmap 33554432: Resource temporarily unavailable
error message please run 'ulimit -l unlimited'
>>> Messages generated by process 15193 on 2009-02-16 07:07:51 CET for package gnome-extra/gnome-screensaver-2.22.2:
LOG: postinst
Information for converting screensavers is located in
/usr/share/doc/gnome-screensaver-2.22.2/xss-conversion.txt.
>>> Messages generated by process 15193 on 2009-02-16 07:09:04 CET for package sys-apps/hal-0.5.11-r1:
LOG: install
Migrating xorg.conf Core Keyboard configuration to HAL FDI file
WARN: install
Failed to migrate your keyboard configuration.
LOG: postinst
The HAL daemon needs to be running for certain applications to
work. Suggested is to add the init script to your start-up
scripts, this should be done like this :
`rc-update add hald default`
Looking for automounting support? Add yourself to the plugdev group
IF you have additional applications which consume ACPI events, you
should consider installing acpid to allow applications to share ACPI
events.
If you wish to use a non US layout, you may do so by executing:
setxkbmap <layout> or by utilizing your Desktop Environment's
Keyboard Layout Settings mechanism.
Under GNOME, this is gnome-keyboard-properties, and under KDE
it is kxkb.
In order have suspend/hibernate function with HAL or apps that use HAL
(such as gnome-power-manager), you should build HAL with the laptop
useflag which will install pm-utils.
X Input Hotplugging (if you build xorg-server with the HAL useflag)
reads user specific configuration from /etc/hal/fdi/policy/.
You should remove the Input sections from your xorg.conf once you have
migrated the rules to a HAL fdi file.
>>> Messages generated by process 15193 on 2009-02-16 07:22:43 CET for package dev-libs/libgweather-2.22.3:
WARN: postinst
Please run revdep-rebuild after upgrading this package.
>>> Messages generated by process 15193 on 2009-02-16 07:23:48 CET for package gnome-extra/gnome-media-2.22.0:
WARN: postinst
If you cannot play some music format, please check your
USE flags on media-plugins/gst-plugins-meta
>>> Messages generated by process 15193 on 2009-02-16 07:38:24 CET for package net-libs/xulrunner-1.8.1.19:
LOG: postinst
Please remember to rebuild any packages that you have built
against xulrunner. Some packages might be broken by the upgrade; if this
is the case, please search at http://bugs.gentoo.org and open a new bug
if one does not exist.
>>> Messages generated by process 15193 on 2009-02-16 07:39:10 CET for package app-arch/file-roller-2.22.4:
LOG: postinst
file-roller is a frontend for several archiving utility. If you want a
particular achive format support, see http://fileroller.sourceforge.net/
and install the relevant package.
for example:
7-zip - app-arch/p7zip
ace - app-arch/unace
arj - app-arch/arj
lzma - app-arch/lzma
lzop - app-arch/lzop
cpio - app-arch/cpio
iso - app-arch/cdrtools
jar,zip - app-arch/zip and app-arch/unzip
lha - app-arch/lha
rar - app-arch/unrar
rpm - app-arch/rpm
unstuff - app-arch/stuffit
zoo - app-arch/zoo
>>> Messages generated by process 15193 on 2009-02-16 07:45:37 CET for package media-video/totem-2.22.2-r1:
WARN: postinst
If totem doesn't play some video format, please check your
USE flags on media-plugins/gst-plugins-meta
>>> Messages generated by process 15193 on 2009-02-16 07:50:38 CET for package net-print/cups-1.3.9-r1:
LOG: postinst
For information about installing a printer and general cups setup
take a look at: http://www.gentoo.org/doc/en/printing-howto.xml
>>> Messages generated by process 15193 on 2009-02-16 08:11:03 CET for package sys-devel/gcc-4.1.2:
WARN: postinst
If you have issues with packages unable to locate libstdc++.la,
then try running 'fix_libtool_files.sh' on the old gcc versions.
>>> Messages generated by process 15193 on 2009-02-16 08:21:31 CET for package app-crypt/gnupg-2.0.9:
LOG: postinst
If you wish to view images emerge:
media-gfx/xloadimage, media-gfx/xli or any other viewer
Remember to use photo-viewer option in configuration file to activate
the right viewer
>>> Messages generated by process 15193 on 2009-02-16 08:25:38 CET for package app-text/aspell-0.60.5:
WARN: compile
Appending a library link instruction (-lgpm); libraries to link to should not be passed through LDFLAGS
LOG: postinst
You will need to install a dictionary now. Please choose an
aspell-<LANG> dictionary from the app-dicts category
After installing an aspell dictionary for your language(s),
You may use the aspell-import utility to import your personal
dictionaries from ispell, pspell and the older aspell
WARN: postinst
Please re-emerge ALL your aspell-LANG dictionaries
>>> Messages generated by process 15193 on 2009-02-16 08:28:55 CET for package dev-lang/php-5.2.8-r2:
WARN: setup
USE flag 'truetype' needs one of these additional flag(s) set:
gd gd-external
'gd' was automatically selected and enabled.
You can change that by enabling/disabling those flags accordingly
in /etc/portage/package.use.
WARN: postinst
If you have additional third party PHP extensions (such as
dev-php5/phpdbg) you may need to recompile them now.
USE="pic" slows down PHP but has to be enabled on setups where TEXTRELs
are disabled (e.g. when using PaX in the kernel). On hardened profiles this
USE flag is enabled automatically
>>> Messages generated by process 15193 on 2009-02-16 08:49:47 CET for package mail-client/evolution-2.22.3.1:
LOG: postinst
To change the default browser if you are not using GNOME, do:
gconftool-2 --set /desktop/gnome/url-handlers/http/command -t string 'mozilla %s'
gconftool-2 --set /desktop/gnome/url-handlers/https/command -t string 'mozilla %s'
Replace 'mozilla %s' with which ever browser you use.
Junk filters are now a run-time choice. You will get a choice of
bogofilter or spamassassin based on which you have installed
You have to install one of these for the spam filtering to actually work
>>> Messages generated by process 15193 on 2009-02-16 08:55:20 CET for package gnome-base/nautilus-2.22.5.1-r1:
LOG: postinst
nautilus can use gstreamer to preview audio files. Just make sure
to have the necessary plugins available to play the media type you
want to preview
>>> Messages generated by process 15193 on 2009-02-16 08:59:28 CET for package media-gfx/imagemagick-6.4.4.6:
LOG: compile
disabling openmp support
>>> Messages generated by process 15193 on 2009-02-16 09:06:07 CET for package gnome-extra/gnome-power-manager-2.22.1:
LOG: postinst
To enable frequency scaling interface, use the following command:
gconftool-2 /apps/gnome-power-manager/ui/cpufreq_show -t bool -s true
Note that this will conflict with other power managment utility
like app-laptop/laptop-mode-tools.
Suspend/hibernate-on-idle will only work if gnome-extra/gnome-screensaver
is installed.
>>> Messages generated by process 15193 on 2009-02-16 09:06:26 CET for package gnome-base/gnome-volume-manager-2.22.5:
LOG: postinst
To start the gnome-volume-manager daemon you need to configure
it through it's preferences capplet. Also the HAL daemon (hald)
needs to be running or it will shut down.
If you experience problems with automounting (windows opened
twice or nothing happening on media insertion) try changing
the status of the automount USE flag.
>>> Messages generated by process 15193 on 2009-02-16 09:12:29 CET for package gnome-base/gdm-2.20.7:
LOG: postrm
To remove GDM from startup please execute
'rc-update del xdm default'
>>> Messages generated by process 15193 on 2009-02-16 09:12:30 CET for package gnome-base/gdm-2.20.7:
LOG: postinst
To make GDM start at boot, edit /etc/conf.d/xdm
and then execute 'rc-update add xdm default'.
GDM has changed the location of its configuration file. Please
edit /etc/X11/gdm/custom.conf. The factory defaults are located
at /usr/share/gdm/{defaults.conf,factory-defaults.conf}
See README.install for more information about the change.
>>> Messages generated by process 15193 on 2009-02-16 09:13:13 CET for package media-sound/sound-juicer-2.22.0-r1:
WARN: postinst
If sound-juicer does not rip to some music format, please check your
USE flags on media-plugins/gst-plugins-meta
>>> Messages generated by process 15193 on 2009-02-16 09:13:34 CET for package app-admin/sabayon-2.22.1:
LOG: postinst
To apply Sabayon defaults and mandatory settings to all users, put
include "$(HOME)/.gconf.path.mandatory"
in /etc/gconf/2/local-mandatory.path and put
include "$(HOME)/.gconf.path.defaults"
in /etc/gconf/2/local-defaults.path.
You can safely create these files if they do not already exist.
>>> Messages generated by process 15193 on 2009-02-16 09:19:11 CET for package gnome-extra/deskbar-applet-2.22.3.1:
WARN: postinst
The dictionary plugin in deskbar-applet uses the dictionary from
gnome-extra/gnome-utils. If it is not present, the dictionary
plugin will fail silently.
>>> Messages generated by process 15193 on 2009-02-16 09:22:48 CET for package gnome-extra/gnome-games-2.22.3:
WARN: setup
USE='-guile' implies that Aisleriot won't be installed
WARN: postinst
Remember, in order to play games, you have to
be in the 'games' group.
Just run 'gpasswd -a <USER> games', then have <USER> re-login.
>>> Messages generated by process 15193 on 2009-02-16 09:22:51 CET for package gnome-base/gnome-2.22.3:
LOG: postinst
Note that to change windowmanager to metacity do:
export WINDOW_MANAGER="/usr/bin/metacity"
of course this works for all other window managers as well
The main file alteration monitoring functionality is now
provided by >=glib-2.16. Note that on a modern Linux system
you do not need the USE=fam flag on it if you have inotify
support in your linux kernel ( >=2.6.13 ) enabled.
USE=fam on glib is however useful for other situations,
such as Gentoo/FreeBSD systems. A global USE=fam can also
be useful for other packages that do not use the new file
monitoring API yet that the new glib provides.
Add yourself to the plugdev group if you want
automounting to work.
>>> Messages generated by process 3939 on 2009-02-16 23:40:26 CET for package x11-drivers/nvidia-drivers-177.82:
LOG: postinst
You must be in the video group to use the NVIDIA device
For more info, read the docs at
http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6
This ebuild installs a kernel module and X driver. Both must
match explicitly in their version. This means, if you restart
X, you most modprobe -r nvidia before starting it back up
To use the NVIDIA GLX, run "eselect opengl set nvidia"
nVidia has requested that any bug reports submitted have the
output of /usr/bin/nvidia-bug-report.sh included.
To work with compiz, you must enable the AddARGBGLXVisuals option.
If you are having resolution problems, try disabling DynamicTwinView.
>>> Messages generated by process 29410 on 2009-02-17 00:17:54 CET for package x11-misc/read-edid-1.4.1-r1:
ERROR: compile
ERROR: x11-misc/read-edid-1.4.1-r1 failed.
Call stack:
ebuild.sh, line 49: Called src_compile
environment, line 2538: Called _eapi0_src_compile
ebuild.sh, line 595: Called _eapi2_src_compile
ebuild.sh, line 629: Called die
The specific snippet of code:
emake || die "emake failed"
The die message:
emake failed
If you need support, post the topmost build error, and the call stack if relevant.
A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090216-231748.log'.
The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'.
>>> Messages generated by process 5933 on 2009-02-17 00:18:25 CET for package x11-misc/read-edid-1.4.1-r1:
ERROR: compile
ERROR: x11-misc/read-edid-1.4.1-r1 failed.
Call stack:
ebuild.sh, line 49: Called src_compile
environment, line 2539: Called _eapi0_src_compile
ebuild.sh, line 595: Called _eapi2_src_compile
ebuild.sh, line 629: Called die
The specific snippet of code:
emake || die "emake failed"
The die message:
emake failed
If you need support, post the topmost build error, and the call stack if relevant.
A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090216-231820.log'.
The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'.
>>> Messages generated by process 4236 on 2009-02-17 00:44:00 CET for package net-irc/xchat-2.8.6-r1:
LOG: postinst
XChat binary has been renamed from xchat-2 to xchat.
>>> Messages generated by process 4315 on 2009-02-17 01:06:50 CET for package x11-misc/read-edid-1.4.1-r1:
ERROR: compile
ERROR: x11-misc/read-edid-1.4.1-r1 failed.
Call stack:
ebuild.sh, line 49: Called src_compile
environment, line 2533: Called _eapi0_src_compile
ebuild.sh, line 595: Called _eapi2_src_compile
ebuild.sh, line 629: Called die
The specific snippet of code:
emake || die "emake failed"
The die message:
emake failed
If you need support, post the topmost build error, and the call stack if relevant.
A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090217-000643.log'.
The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'.
>>> Messages generated by process 5061 on 2009-02-17 23:35:20 CET for package x11-misc/read-edid-1.4.1-r1:
ERROR: compile
ERROR: x11-misc/read-edid-1.4.1-r1 failed.
Call stack:
ebuild.sh, line 49: Called src_compile
environment, line 2536: Called _eapi0_src_compile
ebuild.sh, line 595: Called _eapi2_src_compile
ebuild.sh, line 629: Called die
The specific snippet of code:
emake || die "emake failed"
The die message:
emake failed
If you need support, post the topmost build error, and the call stack if relevant.
A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090217-223511.log'.
The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'.
>>> Messages generated by process 6454 on 2009-02-18 00:01:20 CET for package x11-misc/read-edid-1.4.1-r1:
ERROR: compile
ERROR: x11-misc/read-edid-1.4.1-r1 failed.
Call stack:
ebuild.sh, line 49: Called src_compile
environment, line 2536: Called _eapi0_src_compile
ebuild.sh, line 595: Called _eapi2_src_compile
ebuild.sh, line 629: Called die
The specific snippet of code:
emake || die "emake failed"
The die message:
emake failed
If you need support, post the topmost build error, and the call stack if relevant.
A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090217-230115.log'.
The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'.
>>> Messages generated by process 7772 on 2009-02-18 00:02:22 CET for package x11-misc/read-edid-1.4.1-r1:
ERROR: compile
ERROR: x11-misc/read-edid-1.4.1-r1 failed.
Call stack:
ebuild.sh, line 49: Called src_compile
environment, line 2536: Called _eapi0_src_compile
ebuild.sh, line 595: Called _eapi2_src_compile
ebuild.sh, line 629: Called die
The specific snippet of code:
emake || die "emake failed"
The die message:
emake failed
If you need support, post the topmost build error, and the call stack if relevant.
A complete build log is located at '/var/log/portage/x11-misc:read-edid-1.4.1-r1:20090217-230217.log'.
The ebuild environment file is located at '/var/tmp/portage/x11-misc/read-edid-1.4.1-r1/temp/environment'.
>>> Messages generated by process 9089 on 2009-02-18 00:02:41 CET for package sys-apps/lm_sensors-2.10.7:
ERROR: setup
lm_sensors-2.10.7 requires CONFIG_HWMON to be enabled for 2.6.14+ kernels.
ERROR: sys-apps/lm_sensors-2.10.7 failed.
Call stack:
ebuild.sh, line 49: Called pkg_setup
lm_sensors-2.10.7.ebuild, line 57: Called die
The specific snippet of code:
die "CONFIG_HWMON not detected"
The die message:
CONFIG_HWMON not detected
If you need support, post the topmost build error, and the call stack if relevant.
A complete build log is located at '/var/log/portage/sys-apps:lm_sensors-2.10.7:20090217-230239.log'.
The ebuild environment file is located at '/var/tmp/portage/sys-apps/lm_sensors-2.10.7/temp/die.env'.
>>> Messages generated by process 25962 on 2009-02-18 01:07:07 CET for package x11-drivers/nvidia-drivers-177.82:
LOG: postinst
You must be in the video group to use the NVIDIA device
For more info, read the docs at
http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6
This ebuild installs a kernel module and X driver. Both must
match explicitly in their version. This means, if you restart
X, you most modprobe -r nvidia before starting it back up
To use the NVIDIA GLX, run "eselect opengl set nvidia"
nVidia has requested that any bug reports submitted have the
output of /usr/bin/nvidia-bug-report.sh included.
To work with compiz, you must enable the AddARGBGLXVisuals option.
If you are having resolution problems, try disabling DynamicTwinView.
>>> Messages generated by process 30848 on 2009-02-18 01:08:13 CET for package sys-apps/lm_sensors-2.10.7:
WARN: setup
sensors-detect requires CONFIG_I2C_CHARDEV to be enabled for non-2.4.x kernels.
LOG: postinst
Please run `/usr/sbin/sensors-detect' in order to setup
/etc/conf.d/lm_sensors.
/etc/conf.d/lm_sensors is vital to the init-script.
Please make sure you also add lm_sensors to the desired
runlevel. Otherwise your I2C modules won't get loaded
on the next startup.
You will also need to run the above command if you're upgrading from
<=lm_sensors-2.9.0, as the needed entries in /etc/conf.d/lm_sensors has
changed.
Be warned, the probing of hardware in your system performed by
sensors-detect could freeze your system. Also make sure you read
the documentation before running lm_sensors on IBM ThinkPads.
Please refer to the lm_sensors documentation for more information.
(http://www.lm-sensors.org/wiki/Documentation)
>>> Messages generated by process 13432 on 2009-02-18 01:19:51 CET for package x11-drivers/nvidia-drivers-177.82:
LOG: postinst
You must be in the video group to use the NVIDIA device
For more info, read the docs at
http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6
This ebuild installs a kernel module and X driver. Both must
match explicitly in their version. This means, if you restart
X, you most modprobe -r nvidia before starting it back up
To use the NVIDIA GLX, run "eselect opengl set nvidia"
nVidia has requested that any bug reports submitted have the
output of /usr/bin/nvidia-bug-report.sh included.
To work with compiz, you must enable the AddARGBGLXVisuals option.
If you are having resolution problems, try disabling DynamicTwinView.
>>> Messages generated by process 18319 on 2009-02-18 01:22:33 CET for package sys-apps/lm_sensors-2.10.7:
LOG: postinst
Please run `/usr/sbin/sensors-detect' in order to setup
/etc/conf.d/lm_sensors.
/etc/conf.d/lm_sensors is vital to the init-script.
Please make sure you also add lm_sensors to the desired
runlevel. Otherwise your I2C modules won't get loaded
on the next startup.
You will also need to run the above command if you're upgrading from
<=lm_sensors-2.9.0, as the needed entries in /etc/conf.d/lm_sensors has
changed.
Be warned, the probing of hardware in your system performed by
sensors-detect could freeze your system. Also make sure you read
the documentation before running lm_sensors on IBM ThinkPads.
Please refer to the lm_sensors documentation for more information.
(http://www.lm-sensors.org/wiki/Documentation)
>>> Messages generated by process 27195 on 2009-02-18 01:38:02 CET for package sys-apps/lm_sensors-2.10.7:
LOG: postinst
Please run `/usr/sbin/sensors-detect' in order to setup
/etc/conf.d/lm_sensors.
/etc/conf.d/lm_sensors is vital to the init-script.
Please make sure you also add lm_sensors to the desired
runlevel. Otherwise your I2C modules won't get loaded
on the next startup.
You will also need to run the above command if you're upgrading from
<=lm_sensors-2.9.0, as the needed entries in /etc/conf.d/lm_sensors has
changed.
Be warned, the probing of hardware in your system performed by
sensors-detect could freeze your system. Also make sure you read
the documentation before running lm_sensors on IBM ThinkPads.
Please refer to the lm_sensors documentation for more information.
(http://www.lm-sensors.org/wiki/Documentation)
>>> Messages generated by process 30756 on 2009-02-18 01:38:44 CET for package x11-drivers/nvidia-drivers-177.82:
LOG: postinst
You must be in the video group to use the NVIDIA device
For more info, read the docs at
http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6
This ebuild installs a kernel module and X driver. Both must
match explicitly in their version. This means, if you restart
X, you most modprobe -r nvidia before starting it back up
To use the NVIDIA GLX, run "eselect opengl set nvidia"
nVidia has requested that any bug reports submitted have the
output of /usr/bin/nvidia-bug-report.sh included.
To work with compiz, you must enable the AddARGBGLXVisuals option.
If you are having resolution problems, try disabling DynamicTwinView.
>>> Messages generated by process 4229 on 2009-02-18 23:50:13 CET for package dev-libs/apr-1.3.3:
WARN: postinst
We are now using the system's libtool rather than bundling
our own. You will need to rebuild Apache and possibly other
software if you get a message similiar to the following:
/usr/share/apr-1/build-1/libtool: No such file or directory
>>> Messages generated by process 4229 on 2009-02-18 23:51:37 CET for package net-misc/neon-0.28.3:
WARN: postinst
Neon has a policy of breaking API across minor versions, this means
that any package that links against neon may be broken after
updating. They will remain broken until they are ported to the
new API. You can downgrade neon to the previous version by doing:
emerge --oneshot '<net-misc/neon-0.28'
You may also have to downgrade any package that has already been
ported to the new API.
>>> Messages generated by process 4229 on 2009-02-18 23:53:48 CET for package app-text/opensp-1.5.2-r1:
WARN: postinst
Please note that the soname of the library changed.
If you are upgrading from a previous version you need
to fix dynamic linking inconsistencies by executing:
revdep-rebuild --library='libosp.so.*'
>>> Messages generated by process 4229 on 2009-02-18 23:54:34 CET for package dev-util/cvs-1.12.12-r4:
LOG: unpack
If you want any CVS server functionality, you MUST emerge with USE=server!
>>> Messages generated by process 4229 on 2009-02-18 23:56:39 CET for package dev-util/quilt-0.46:
LOG: setup
If you intend to use the folding functionality (graphical illustration of the
patch stack) then you'll need to remerge this package with USE=graphviz.
>>> Messages generated by process 4229 on 2009-02-18 23:59:39 CET for package dev-util/subversion-1.5.5:
LOG: postinst
Subversion Server Notes
-----------------------
If you intend to run a server, a repository needs to be created using
svnadmin (see man svnadmin) or the following command to create it in
/var/svn:
emerge --config =dev-util/subversion-1.5.5
Subversion has multiple server types, take your pick:
- svnserve daemon:
1. Edit /etc/conf.d/svnserve
2. Fix the repository permissions (see "Fixing the repository permissions")
3. Start daemon: /etc/init.d/svnserve start
4. Make persistent: rc-update add svnserve default
- svnserve via xinetd:
1. Edit /etc/xinetd.d/svnserve (remove disable line)
2. Fix the repository permissions (see "Fixing the repository permissions")
3. Restart xinetd.d: /etc/init.d/xinetd restart
- svn over ssh:
1. Fix the repository permissions (see "Fixing the repository permissions")
Additionally run:
groupadd svnusers
chown -R root:svnusers /var/svn/repos
2. Create an svnserve wrapper in /usr/local/bin to set the umask you
want, for example:
#!/bin/bash
. /etc/conf.d/svnserve
umask 007
exec /usr/bin/svnserve ${SVNSERVE_OPTS} "$@"
Fixing the repository permissions:
chmod -Rf go-rwx /var/svn/conf
chmod -Rf g-w,o-rwx /var/svn/repos
chmod -Rf g+rw /var/svn/repos/db
chmod -Rf g+rw /var/svn/repos/locks
If you intend to use svn-hot-backup, you can specify the number of
backups to keep per repository by specifying an environment variable.
If you want to keep e.g. 2 backups, do the following:
echo '# hot-backup: Keep that many repository backups around' > /etc/env.d/80subversion
echo 'SVN_HOTBACKUP_BACKUPS_NUMBER=2' >> /etc/env.d/80subversion
>>> Messages generated by process 4229 on 2009-02-19 00:08:28 CET for package dev-libs/boost-1.34.1-r2:
LOG: compile
Using the following options to build:
release debug-symbols=none optimization=none --user-config=/var/tmp/portage/dev-libs/boost-1.34.1-r2/work/boost_1_34_1/user-config.jam
>>> Messages generated by process 23313 on 2009-02-19 00:12:18 CET for package dev-util/git-1.6.0.6:
LOG: postinst
These additional scripts need some dependencies:
git-quiltimport : dev-util/quilt
git-instaweb : || ( www-servers/lighttpd www-servers/apache )
>>> Messages generated by process 10098 on 2009-02-20 00:49:57 CET for package sys-apps/hal-0.5.11-r8:
LOG: postinst
The HAL daemon needs to be running for certain applications to
work. Suggested is to add the init script to your start-up
scripts, this should be done like this :
`rc-update add hald default`
Looking for automounting support? Add yourself to the plugdev group
IF you have additional applications which consume ACPI events, you
should consider installing acpid to allow applications to share ACPI
events.
If you wish to use a non US layout, you may do so by executing:
setxkbmap <layout> or by utilizing your Desktop Environment's
Keyboard Layout Settings mechanism.
Under GNOME, this is gnome-keyboard-properties, and under KDE
it is kxkb.
In order have suspend/hibernate function with HAL or apps that use HAL
(such as gnome-power-manager), you should build HAL with the laptop
useflag which will install pm-utils.
X Input Hotplugging (if you build xorg-server with the HAL useflag)
reads user specific configuration from /etc/hal/fdi/policy/.
You should remove the Input sections from your xorg.conf once you have
migrated the rules to a HAL fdi file.
>>> Messages generated by process 5824 on 2009-02-20 01:03:24 CET for package net-www/netscape-flash-10.0.15.3:
WARN: postinst
Flash player is closed-source, with a long history of security
issues. Please consider only running flash applets you know to
be safe.
>>> Messages generated by process 27905 on 2009-02-28 14:35:36 CET for package sys-apps/lm_sensors-2.10.7:
LOG: postinst
Please run `/usr/sbin/sensors-detect' in order to setup
/etc/conf.d/lm_sensors.
/etc/conf.d/lm_sensors is vital to the init-script.
Please make sure you also add lm_sensors to the desired
runlevel. Otherwise your I2C modules won't get loaded
on the next startup.
You will also need to run the above command if you're upgrading from
<=lm_sensors-2.9.0, as the needed entries in /etc/conf.d/lm_sensors has
changed.
Be warned, the probing of hardware in your system performed by
sensors-detect could freeze your system. Also make sure you read
the documentation before running lm_sensors on IBM ThinkPads.
Please refer to the lm_sensors documentation for more information.
(http://www.lm-sensors.org/wiki/Documentation)
>>> Messages generated by process 30831 on 2009-02-28 14:36:21 CET for package x11-drivers/nvidia-drivers-177.82:
LOG: postinst
You must be in the video group to use the NVIDIA device
For more info, read the docs at
http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6
This ebuild installs a kernel module and X driver. Both must
match explicitly in their version. This means, if you restart
X, you most modprobe -r nvidia before starting it back up
To use the NVIDIA GLX, run "eselect opengl set nvidia"
nVidia has requested that any bug reports submitted have the
output of /usr/bin/nvidia-bug-report.sh included.
To work with compiz, you must enable the AddARGBGLXVisuals option.
If you are having resolution problems, try disabling DynamicTwinView.
>>> Messages generated by process 20259 on 2009-03-02 22:58:48 CET for package dev-db/sqlite-3.6.10:
LOG: postinst
sqlite-3.6.X is not totally backwards compatible, see
http://www.sqlite.org/releaselog/3_6_0.html for full details.
>>> Messages generated by process 20259 on 2009-03-02 23:01:11 CET for package app-text/poppler-bindings-0.10.4:
WARN: postinst
You need to rebuild everything depending on poppler, use revdep-rebuild
>>> Messages generated by process 20259 on 2009-03-02 23:10:40 CET for package media-gfx/imagemagick-6.4.8.3:
LOG: configure
disabling openmp support
>>> Messages generated by process 20259 on 2009-03-02 23:11:43 CET for package gnome-base/gdm-2.20.7:
LOG: postrm
To remove GDM from startup please execute
'rc-update del xdm default'
>>> Messages generated by process 20259 on 2009-03-02 23:11:44 CET for package gnome-base/gdm-2.20.9-r1:
LOG: postinst
To make GDM start at boot, edit /etc/conf.d/xdm
and then execute 'rc-update add xdm default'.
GDM has changed the location of its configuration file. Please
edit /etc/X11/gdm/custom.conf. The factory defaults are located
at /usr/share/gdm/{defaults.conf,factory-defaults.conf}
See README.install for more information about the change.
>>> Messages generated by process 21159 on 2009-03-08 23:54:46 CET for package net-wireless/bluez-libs-3.36:
LOG: postinst
If you are upgrading from =net-wireless/bluez-libs-2*,
the ABI version of libbluetooth has changed.
Please run:
revdep-rebuild --library libbluetooth.so.1
>>> Messages generated by process 21159 on 2009-03-08 23:55:18 CET for package media-libs/freetype-2.3.8:
LOG: postinst
The utilities and demos previously bundled with freetype are now
optional. Enable the utils USE flag if you would like them
to be installed.
>>> Messages generated by process 21159 on 2009-03-08 23:55:24 CET for package net-www/netscape-flash-10.0.22.87:
WARN: postinst
Flash player is closed-source, with a long history of security
issues. Please consider only running flash applets you know to
be safe. The 'flashblock' extension may help for mozilla users:
https://addons.mozilla.org/en-US/firefox/addon/433
>>> Messages generated by process 21159 on 2009-03-08 23:56:25 CET for package app-text/aspell-0.60.6:
WARN: compile
Appending a library link instruction (-lgpm); libraries to link to should not be passed through LDFLAGS
LOG: postinst
You will need to install a dictionary now. Please choose an
aspell-<LANG> dictionary from the app-dicts category
After installing an aspell dictionary for your language(s),
You may use the aspell-import utility to import your personal
dictionaries from ispell, pspell and the older aspell
WARN: postinst
Please re-install ALL your aspell-LANG dictionaries
>>> Messages generated by process 27652 on 2009-03-09 00:07:01 CET for package media-video/totem-2.22.2-r1:
WARN: postinst
If totem doesn't play some video format, please check your
USE flags on media-plugins/gst-plugins-meta
>>> Messages generated by process 14275 on 2009-03-09 00:10:10 CET for package net-print/gutenprint-5.1.4:
LOG: postinst
Updating installed printer ppd files
No Gutenprint PPD files to update.
>>> Messages generated by process 4406 on 2009-03-09 23:09:58 CET for package net-print/gutenprint-5.2.3:
LOG: postinst
Updating installed printer ppd files
Updated /etc/cups/ppd/Canon_BJC-6500_USB_1.ppd using /usr/share/cups/model/gutenprint/5.2/C/stp-bjc-6500.5.2.ppd.gz Updated 1 PPD file.Restart cupsd for the changes to take effect.
>>> Messages generated by process 3032 on 2009-03-09 23:15:27 CET for package sys-auth/pambase-20081028:
LOG: postinst
Starting from version 20080801, pambase optionally enables
SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
built against sys-libs/glibc-2.7 or later.
If you don't have support for this, it will automatically fallback
to MD5-hashed passwords, just like before.
Please note that the change only affects the newly-changed passwords
and that SHA512-hashed passwords will not work on earlier versions
of glibc or Linux-PAM.
>>> Messages generated by process 3032 on 2009-03-09 23:16:18 CET for package sys-apps/busybox-1.13.2:
WARN: unpack
Could not locate user configfile, so we will save a default one
LOG: install
Your configuration for sys-apps/busybox-1.13.2 has been saved in
/etc/portage/savedconfig/sys-apps/busybox-1.13.2 for your editing pleasure.
You can edit these files by hand and remerge this package with
USE=savedconfig to customise the configuration.
You can rename this file/directory to one of the following for
its configuration to apply to multiple versions:
${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
[${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]
>>> Messages generated by process 1739 on 2009-03-18 00:50:36 CET for package app-text/hunspell-1.2.8:
LOG: postinst
To use this package you will also need a dictionary.
Hunspell uses myspell format dictionaries; find them
in the app-dicts category as myspell-<LANG>.
>>> Messages generated by process 1739 on 2009-03-18 01:00:19 CET for package x11-libs/libxklavier-3.8:
WARN: postinst
Please note that the soname of the library changed!
If you are upgrading from a version prior to 3.4 you need
to fix dynamic linking inconsistencies by executing:
revdep-rebuild -X --library libxklavier.so.11
>>> Messages generated by process 1739 on 2009-03-18 01:00:45 CET for package app-text/enchant-1.4.2:
WARN: postinst
Starting with enchant-1.4.0 default spell checking engine has changed
from aspell to hunspell. In case you used aspell dictionaries to
check spelling you need either reemerge enchant with aspell USE flag
or you need to emerge myspell-<lang> dictionaries.
aspell is faster but has less features then hunspell and most
distributions by default use hunspell only. Nevertheless in Gentoo
it's still your choice which library to use...
>>> Messages generated by process 1739 on 2009-03-18 01:03:12 CET for package x11-drivers/nvidia-drivers-180.29:
LOG: postinst
You must be in the video group to use the NVIDIA device
For more info, read the docs at
http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6
This ebuild installs a kernel module and X driver. Both must
match explicitly in their version. This means, if you restart
X, you most modprobe -r nvidia before starting it back up
To use the NVIDIA GLX, run "eselect opengl set nvidia"
nVidia has requested that any bug reports submitted have the
output of /usr/bin/nvidia-bug-report.sh included.
To work with compiz, you must enable the AddARGBGLXVisuals option.
If you are having resolution problems, try disabling DynamicTwinView.
>>> Messages generated by process 1739 on 2009-03-18 01:09:15 CET for package gnome-base/gnome-desktop-2.24.3:
WARN: postinst
If you are upgrading from <gnome-base/gnome-desktop-2.24, please
make sure you run revdep-rebuild at the end of the upgrade.
>>> Messages generated by process 1739 on 2009-03-18 01:17:40 CET for package gnome-extra/evolution-data-server-2.24.5-r2:
LOG: postinst
LDAP schemas needed by evolution are installed in /etc/openldap/schema
>>> Messages generated by process 1739 on 2009-03-18 01:24:12 CET for package gnome-extra/gnome-media-2.24.0.1-r1:
WARN: postinst
If you cannot play some music format, please check your
USE flags on media-plugins/gst-plugins-meta
>>> Messages generated by process 1739 on 2009-03-18 01:25:41 CET for package dev-python/gtksourceview-python-2.24.1:
LOG: postinst
This package provides python bindings for x11-libs/gtksourceview-1.8.
If you want to 2.* python bindings, use dev-python/pygtksourceview-2
>>> Messages generated by process 1739 on 2009-03-18 01:46:45 CET for package gnome-extra/deskbar-applet-2.24.3:
WARN: postinst
The dictionary plugin in deskbar-applet uses the dictionary from
gnome-extra/gnome-utils. If it is not present, the dictionary
plugin will fail silently.
>>> Messages generated by process 1739 on 2009-03-18 01:49:22 CET for package media-sound/sound-juicer-2.24.0:
WARN: postinst
If sound-juicer does not rip to some music format, please check your
USE flags on media-plugins/gst-plugins-meta
>>> Messages generated by process 1739 on 2009-03-18 01:55:05 CET for package gnome-extra/gnome-games-2.24.3:
WARN: setup
USE='-guile' implies that Aisleriot won't be installed
WARN: postinst
Remember, in order to play games, you have to
be in the 'games' group.
Just run 'gpasswd -a <USER> games', then have <USER> re-login.
>>> Messages generated by process 1739 on 2009-03-18 02:11:55 CET for package mail-client/evolution-2.24.5:
LOG: postinst
To change the default browser if you are not using GNOME, do:
gconftool-2 --set /desktop/gnome/url-handlers/http/command -t string 'mozilla %s'
gconftool-2 --set /desktop/gnome/url-handlers/https/command -t string 'mozilla %s'
Replace 'mozilla %s' with which ever browser you use.
Junk filters are now a run-time choice. You will get a choice of
bogofilter or spamassassin based on which you have installed
You have to install one of these for the spam filtering to actually work
>>> Messages generated by process 1739 on 2009-03-18 02:12:13 CET for package gnome-base/gnome-volume-manager-2.24.1:
LOG: postinst
To start the gnome-volume-manager daemon you need to configure
it through it's preferences capplet. Also the HAL daemon (hald)
needs to be running or it will shut down.
If you experience problems with automounting (windows opened
twice or nothing happening on media insertion) try changing
the status of the automount USE flag.
>>> Messages generated by process 1739 on 2009-03-18 02:19:33 CET for package x11-libs/gtk+-2.14.7-r2:
LOG: postinst
Please install app-text/evince for print preview functionality.
Alternatively, check "gtk-print-preview-command" documentation and
add it to your gtkrc.
>>> Messages generated by process 1739 on 2009-03-18 02:26:44 CET for package app-arch/file-roller-2.24.3:
LOG: postinst
file-roller is a frontend for several archiving utilities. If you want a
particular achive format support, see http://fileroller.sourceforge.net/
and install the relevant package.
for example:
7-zip - app-arch/p7zip
ace - app-arch/unace
arj - app-arch/arj
lzma - app-arch/lzma
lzop - app-arch/lzop
cpio - app-arch/cpio
iso - app-arch/cdrtools
jar,zip - app-arch/zip and app-arch/unzip
lha - app-arch/lha
rar - app-arch/unrar
rpm - app-arch/rpm
unstuff - app-arch/stuffit
zoo - app-arch/zoo
>>> Messages generated by process 1739 on 2009-03-18 02:27:53 CET for package gnome-extra/gnome-screensaver-2.24.1-r1:
LOG: postinst
Information for converting screensavers is located in
/usr/share/doc/gnome-screensaver-2.24.1-r1/xss-conversion.txt.
>>> Messages generated by process 1739 on 2009-03-18 02:29:38 CET for package gnome-base/nautilus-2.24.2:
LOG: postinst
nautilus can use gstreamer to preview audio files. Just make sure
to have the necessary plugins available to play the media type you
want to preview
>>> Messages generated by process 1739 on 2009-03-18 02:34:03 CET for package media-video/totem-2.24.3:
WARN: postinst
If totem doesn't play some video format, please check your
USE flags on media-plugins/gst-plugins-meta
>>> Messages generated by process 1739 on 2009-03-18 02:43:00 CET for package gnome-base/gnome-2.24.1:
LOG: postinst
The main file alteration monitoring functionality is
provided by >=glib-2.16. Note that on a modern Linux system
you do not need the USE=fam flag on it if you have inotify
support in your linux kernel ( >=2.6.13 ) enabled.
USE=fam on glib is however useful for other situations,
such as Gentoo/FreeBSD systems. A global USE=fam can also
be useful for other packages that do not use the new file
monitoring API yet that the new glib provides.
Add yourself to the plugdev group if you want
automounting to work.
>>> Messages generated by process 5076 on 2009-03-18 22:47:49 CET for package x11-drivers/nvidia-drivers-180.29:
LOG: postinst
You must be in the video group to use the NVIDIA device
For more info, read the docs at
http://www.gentoo.org/doc/en/nvidia-guide.xml#doc_chap3_sect6
This ebuild installs a kernel module and X driver. Both must
match explicitly in their version. This means, if you restart
X, you most modprobe -r nvidia before starting it back up
To use the NVIDIA GLX, run "eselect opengl set nvidia"
nVidia has requested that any bug reports submitted have the
output of /usr/bin/nvidia-bug-report.sh included.
To work with compiz, you must enable the AddARGBGLXVisuals option.
If you are having resolution problems, try disabling DynamicTwinView.
>>> Messages generated by process 13621 on 2009-03-18 22:48:51 CET for package gnome-base/gnome-2.24.1:
LOG: postinst
The main file alteration monitoring functionality is
provided by >=glib-2.16. Note that on a modern Linux system
you do not need the USE=fam flag on it if you have inotify
support in your linux kernel ( >=2.6.13 ) enabled.
USE=fam on glib is however useful for other situations,
such as Gentoo/FreeBSD systems. A global USE=fam can also
be useful for other packages that do not use the new file
monitoring API yet that the new glib provides.
Add yourself to the plugdev group if you want
automounting to work.
>>> Messages generated by process 8473 on 2009-03-19 00:13:26 CET for package x11-libs/libxklavier-3.6:
WARN: postinst
Please note that the soname of the library changed!
If you are upgrading from a version prior to 3.4 you need
to fix dynamic linking inconsistencies by executing:
revdep-rebuild -X --library libxklavier.so.11
>>> Messages generated by process 6269 on 2009-03-22 00:00:24 CET for package media-sound/alsa-utils-1.0.17:
LOG: postinst
To take advantage of the init script, and automate the process of
loading and unloading the ALSA sound drivers as well as
storing and restoring sound-card mixer levels you should
add alsasound to the boot runlevel. You can do this as
root like so:
# rc-update add alsasound boot
>>> Messages generated by process 5459 on 2009-03-26 22:58:18 CET for package app-crypt/gnupg-2.0.10:
LOG: postinst
If you wish to view images emerge:
media-gfx/xloadimage, media-gfx/xli or any other viewer
Remember to use photo-viewer option in configuration file to activate
the right viewer