rendered paste bodyng Table [\_SB_.PCI0.RP03._PRT]
[ 0.124743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.129091] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.130412] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.131281] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.132077] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.132915] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.133767] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.134677] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.135413] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.137066] SCSI subsystem initialized
[ 0.137088] libata version 3.00 loaded.
[ 0.137088] PCI: Using ACPI for IRQ routing
[ 0.137180] pci 0000:05:00.0: BAR 0: can't allocate resource
[ 0.141999] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.142271] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.147984] pnp: PnP ACPI init
[ 0.148082] ACPI: bus type pnp registered
[ 0.150837] pnp: PnP ACPI: found 11 devices
[ 0.150931] ACPI: ACPI bus type pnp unregistered
[ 0.151036] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.151136] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.151236] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.151335] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.151435] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.151535] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.151635] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.151734] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.151839] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.151945] system 00:06: ioport range 0x200-0x20f has been reserved
[ 0.152048] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.152146] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.152244] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.152343] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.152441] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.152542] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 0.152640] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 0.187880] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.187982] pci 0000:00:1c.0: IO window: 0xf000-0xffff
[ 0.188083] pci 0000:00:1c.0: MEM window: 0xfac00000-0xfebfffff
[ 0.188183] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.188284] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.188380] pci 0000:00:1c.1: IO window: disabled
[ 0.188478] pci 0000:00:1c.1: MEM window: disabled
[ 0.188575] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.188689] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[ 0.188784] pci 0000:00:1c.2: IO window: disabled
[ 0.188883] pci 0000:00:1c.2: MEM window: 0xf7000000-0xf70fffff
[ 0.188986] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.189091] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.189189] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.189289] pci 0000:00:1e.0: MEM window: 0xf0200000-0xf02fffff
[ 0.189388] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.189496] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.189598] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.189701] pci 0000:00:1c.0: setting latency timer to 64
[ 0.189711] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.189814] pci 0000:00:1c.1: setting latency timer to 64
[ 0.189823] pci 0000:00:1c.2: enabling device (0000 -> 0002)
[ 0.189922] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.190028] pci 0000:00:1c.2: setting latency timer to 64
[ 0.190037] pci 0000:00:1e.0: setting latency timer to 64
[ 0.190042] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.190045] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.190048] pci_bus 0000:02: resource 0 io: [0xf000-0xffff]
[ 0.190051] pci_bus 0000:02: resource 1 mem: [0xfac00000-0xfebfffff]
[ 0.190054] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
[ 0.190057] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.190059] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
[ 0.190062] pci_bus 0000:04: resource 1 mem: [0x0-0x0]
[ 0.190064] pci_bus 0000:04: resource 2 mem: [0x0-0x0]
[ 0.190067] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 0.190069] pci_bus 0000:05: resource 0 mem: [0x0-0x0]
[ 0.190072] pci_bus 0000:05: resource 1 mem: [0xf7000000-0xf70fffff]
[ 0.190075] pci_bus 0000:05: resource 2 mem: [0x0-0x0]
[ 0.190077] pci_bus 0000:05: resource 3 mem: [0x0-0x0]
[ 0.190080] pci_bus 0000:06: resource 0 io: [0x2000-0x2fff]
[ 0.190083] pci_bus 0000:06: resource 1 mem: [0xf0200000-0xf02fffff]
[ 0.190086] pci_bus 0000:06: resource 2 mem: [0x0-0x0]
[ 0.190088] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.190091] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[ 0.190126] NET: Registered protocol family 2
[ 0.201036] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.201453] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.202388] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.202878] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.202982] TCP reno registered
[ 0.206061] NET: Registered protocol family 1
[ 0.206315] Simple Boot Flag at 0x35 set to 0x1
[ 0.207630] highmem bounce pool size: 64 pages
[ 0.212238] msgmni has been set to 1748
[ 0.213191] alg: No test for stdrng (krng)
[ 0.213299] io scheduler noop registered
[ 0.213393] io scheduler anticipatory registered
[ 0.213487] io scheduler deadline registered
[ 0.213596] io scheduler cfq registered (default)
[ 0.213706] pci 0000:00:02.0: Boot video device
[ 0.213982] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.214069] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.214287] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.214368] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.214574] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.214656] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.215402] ACPI: AC Adapter [AC0] (on-line)
[ 0.223881] ACPI: Battery Slot [BAT0] (battery present)
[ 0.224164] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.224327] ACPI: Power Button (FF) [PWRF]
[ 0.224535] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.225137] ACPI: Lid Switch [LID0]
[ 0.225315] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.225482] ACPI: Power Button (CM) [PWRB]
[ 0.225659] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 0.225823] ACPI: Sleep Button (CM) [SLPB]
[ 0.226839] ACPI: SSDT 3F697F00, 01EA (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 0.227426] ACPI: SSDT 3F697CB5, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 0.228076] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.228427] processor ACPI_CPU:00: registered as cooling_device0
[ 0.228549] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.229617] ACPI: SSDT 3F6980EA, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 0.230176] ACPI: SSDT 3F697E7B, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 0.230879] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.231255] processor ACPI_CPU:01: registered as cooling_device1
[ 0.231410] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.233981] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.234975] ACPI: Thermal Zone [THRM] (63 C)
[ 0.250543] intel_rng: FWH not detected
[ 0.250664] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.253155] brd: module loaded
[ 0.254119] loop: module loaded
[ 0.254320] Uniform Multi-Platform E-IDE driver
[ 0.254515] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 0.254624] PIIX_IDE 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.254732] piix 0000:00:1f.1: IDE port disabled
[ 0.254833] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 0.254937] ide0: BM-DMA at 0x1810-0x1817
[ 0.255046] Probing IDE interface ide0...
[ 0.499032] Switched to high resolution mode on CPU 1
[ 0.500008] Switched to high resolution mode on CPU 0
[ 0.928357] hda: Optiarc DVD RW AD-7540A, ATAPI CD/DVD-ROM drive
[ 1.540081] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.540230] hda: UDMA/33 mode selected
[ 1.540465] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.540789] ide-cd driver 5.00
[ 1.541478] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 1.541882] Uniform CD-ROM driver Revision: 3.20
[ 1.545609] Driver 'sd' needs updating - please use bus_type methods
[ 1.545768] ahci 0000:00:1f.2: version 3.0
[ 1.545779] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.545920] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.545990] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.546138] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.546240] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.546454] scsi0 : ahci
[ 1.546714] scsi1 : ahci
[ 1.546928] scsi2 : ahci
[ 1.547147] scsi3 : ahci
[ 1.547424] ata1: SATA max UDMA/133 abar m1024@0xf0004400 port 0xf0004500 irq 27
[ 1.547563] ata2: DUMMY
[ 1.547655] ata3: SATA max UDMA/133 abar m1024@0xf0004400 port 0xf0004600 irq 27
[ 1.547794] ata4: DUMMY
[ 1.852024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.852721] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.852944] ata1.00: ATA-7: FUJITSU MHV2100BH, 00000029, max UDMA/100
[ 1.853052] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.855730] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.855968] ata1.00: configured for UDMA/100
[ 1.867103] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5
[ 1.867473] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
[ 1.867630] sd 0:0:0:0: [sda] Write Protect is off
[ 1.867725] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.867755] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.867963] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
[ 1.868123] sd 0:0:0:0: [sda] Write Protect is off
[ 1.868216] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.868245] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.868386] sda: sda1 sda2 sda3
[ 1.894849] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.200020] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.211213] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.214647] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.216134] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.216232] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.216329] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.216425] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.216520] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.216774] mice: PS/2 mouse device common for all mice
[ 2.230469] cpuidle: using governor ladder
[ 2.231107] cpuidle: using governor menu
[ 2.231651] TCP cubic registered
[ 2.231743] Initializing XFRM netlink socket
[ 2.231841] NET: Registered protocol family 17
[ 2.231942] NET: Registered protocol family 15
[ 2.232102] Marking TSC unstable due to TSC halts in idle
[ 2.232377] RPC: Registered udp transport module.
[ 2.232473] RPC: Registered tcp transport module.
[ 2.232583] Using IPI No-Shortcut mode
[ 2.262184] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.500104] Clocksource tsc unstable (delta = -253187091 ns)
[ 3.019675] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 3.052640] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[ 3.155812] registered taskstats version 1
[ 3.183172] kjournald starting. Commit interval 5 seconds
[ 3.183209] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.183219] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 3.183399] Freeing unused kernel memory: 256k freed
[ 6.742370] Linux agpgart interface v0.103
[ 6.746310] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 6.747178] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 6.750885] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 6.783593] usbcore: registered new interface driver usbfs
[ 6.783737] usbcore: registered new interface driver hub
[ 6.784184] usbcore: registered new device driver usb
[ 6.802575] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.802723] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.802862] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 6.802867] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.803025] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 6.807077] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.807175] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 6.807195] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0004000
[ 6.818081] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.818226] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.818333] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.818481] usb usb1: Product: EHCI Host Controller
[ 6.818581] usb usb1: Manufacturer: Linux 2.6.29-zohar.b ehci_hcd
[ 6.818689] usb usb1: SerialNumber: 0000:00:1d.7
[ 6.818873] usb usb1: configuration #1 chosen from 1 choice
[ 6.819028] hub 1-0:1.0: USB hub found
[ 6.819131] hub 1-0:1.0: 8 ports detected
[ 6.819429] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.819575] ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI region SMBI [0x18e0-0x18ef]
[ 6.819725] ACPI: Device needs an ACPI driver
[ 6.856243] 8139too Fast Ethernet driver 0.9.28
[ 6.856389] 8139too 0000:06:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.857325] eth0: RealTek RTL8139 at 0xf8206c00, 00:03:0d:53:dd:52, IRQ 16
[ 6.857424] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 6.890728] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 6.890874] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 7.073392] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.073556] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 7.073710] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.073715] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.073846] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 7.074019] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 7.074165] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.074275] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.074417] usb usb2: Product: UHCI Host Controller
[ 7.074513] usb usb2: Manufacturer: Linux 2.6.29-zohar.b uhci_hcd
[ 7.074611] usb usb2: SerialNumber: 0000:00:1d.0
[ 7.074778] usb usb2: configuration #1 chosen from 1 choice
[ 7.074912] hub 2-0:1.0: USB hub found
[ 7.075014] hub 2-0:1.0: 2 ports detected
[ 7.075222] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.075339] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.075343] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.075464] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 7.075642] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 7.075776] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.075877] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.076020] usb usb3: Product: UHCI Host Controller
[ 7.076117] usb usb3: Manufacturer: Linux 2.6.29-zohar.b uhci_hcd
[ 7.076214] usb usb3: SerialNumber: 0000:00:1d.1
[ 7.076376] usb usb3: configuration #1 chosen from 1 choice
[ 7.076502] hub 3-0:1.0: USB hub found
[ 7.076605] hub 3-0:1.0: 2 ports detected
[ 7.076844] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.076971] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.076975] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.077109] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 7.077308] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 7.077454] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.077561] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.077710] usb usb4: Product: UHCI Host Controller
[ 7.077809] usb usb4: Manufacturer: Linux 2.6.29-zohar.b uhci_hcd
[ 7.077909] usb usb4: SerialNumber: 0000:00:1d.2
[ 7.078075] usb usb4: configuration #1 chosen from 1 choice
[ 7.078208] hub 4-0:1.0: USB hub found
[ 7.078319] hub 4-0:1.0: 2 ports detected
[ 7.078541] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 7.078647] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 7.078652] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 7.078773] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 7.078948] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 7.079090] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.079189] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.079338] usb usb5: Product: UHCI Host Controller
[ 7.079432] usb usb5: Manufacturer: Linux 2.6.29-zohar.b uhci_hcd
[ 7.079529] usb usb5: SerialNumber: 0000:00:1d.3
[ 7.079678] usb usb5: configuration #1 chosen from 1 choice
[ 7.079806] hub 5-0:1.0: USB hub found
[ 7.079904] hub 5-0:1.0: 2 ports detected
[ 7.088384] acpi device:0a: registered as cooling_device2
[ 7.088636] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input6
[ 7.096342] ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
[ 7.139937] sdhci: Secure Digital Host Controller Interface driver
[ 7.140050] sdhci: Copyright(c) Pierre Ossman
[ 7.159590] sdhci-pci 0000:06:04.2: SDHCI controller found [1217:7120] (rev 1)
[ 7.159752] sdhci-pci 0000:06:04.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.159986] mmc0: Unknown controller version (16). You may experience problems.
[ 7.160173] Registered led device: mmc0::
[ 7.160306] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
[ 7.199923] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.200134] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.238502] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 7.370149] usb 1-5: New USB device found, idVendor=0bc2, idProduct=3000
[ 7.370253] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.370353] usb 1-5: Product: FreeAgentDesktop
[ 7.370448] usb 1-5: Manufacturer: Seagate
[ 7.370542] usb 1-5: SerialNumber: 9QM37MZL
[ 7.370738] usb 1-5: configuration #1 chosen from 1 choice
[ 7.478061] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 7.488674] Initializing USB Mass Storage driver...
[ 7.488918] scsi4 : SCSI emulation for USB Mass Storage devices
[ 7.489155] usbcore: registered new interface driver usb-storage
[ 7.489158] usb-storage: device found at 3
[ 7.489161] usb-storage: waiting for device to settle before scanning
[ 7.489259] USB Mass Storage support registered.
[ 7.610191] usb 2-1: New USB device found, idVendor=04cc, idProduct=1122
[ 7.610333] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.610846] usb 2-1: configuration #1 chosen from 1 choice
[ 7.612363] hub 2-1:1.0: USB hub found
[ 7.614169] hub 2-1:1.0: 4 ports detected
[ 7.772962] Adding 1598456k swap on /dev/sda2. Priority:-1 extents:1 across:1598456k
[ 7.893191] usb 2-1.2: new low speed USB device using uhci_hcd and address 3
[ 8.173187] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c30e
[ 8.173289] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.173430] usb 2-1.2: Product: HID compliant keyboard
[ 8.173525] usb 2-1.2: Manufacturer: Logitech
[ 8.173720] usb 2-1.2: configuration #1 chosen from 1 choice
[ 8.251191] usb 2-1.3: new low speed USB device using uhci_hcd and address 4
[ 8.371847] usbcore: registered new interface driver hiddev
[ 8.381059] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c040
[ 8.382058] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.382223] usb 2-1.3: Product: USB-PS/2 Optical Mouse
[ 8.382319] usb 2-1.3: Manufacturer: Logitech
[ 8.382534] usb 2-1.3: configuration #1 chosen from 1 choice
[ 8.432582] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7
[ 8.440120] generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.2/input0
[ 8.452188] usb 2-1.4: new full speed USB device using uhci_hcd and address 5
[ 8.559308] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input8
[ 8.559771] usb 2-1.4: New USB device found, idVendor=0b05, idProduct=1739
[ 8.559876] usb 2-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 8.560046] usb 2-1.4: Product: USB Advanced Audio Device
[ 8.560146] usb 2-1.4: Manufacturer: C-Media Electronics Inc.
[ 8.560606] usb 2-1.4: configuration #1 chosen from 1 choice
[ 8.568097] generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.2/input1
[ 8.582570] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input9
[ 8.591016] generic-usb 0003:046D:C040.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 8.595252] input: C-Media Electronics Inc. USB Advanced Audio Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.3/input/input10
[ 8.602109] generic-usb 0003:0B05:1739.0004: input,hidraw3: USB HID v1.00 Device [C-Media Electronics Inc. USB Advanced Audio Device] on usb-0000:00:1d.0-1.4/input3
[ 8.602338] usbcore: registered new interface driver usbhid
[ 8.602444] usbhid: v2.6:USB HID core driver
[ 8.986393] usbcore: registered new interface driver snd-usb-audio
[ 9.356701] EXT3 FS on sda1, internal journal
[ 9.506409] device-mapper: uevent: version 1.0.3
[ 9.508467] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 10.408645] EXT4-fs: barriers enabled
[ 10.409034] kjournald2 starting: pid 1717, dev sda3:8, commit interval 5 seconds
[ 10.409363] EXT4 FS on sda3, internal journal on sda3:8
[ 10.409459] EXT4-fs: delayed allocation enabled
[ 10.409553] EXT4-fs: file extents enabled
[ 10.409900] EXT4-fs: mballoc enabled
[ 10.409992] EXT4-fs: mounted filesystem sda3 with ordered data mode
[ 12.327926] fuse init (API version 7.11)
[ 12.490655] usb-storage: device scan complete
[ 12.492124] scsi 4:0:0:0: Direct-Access Seagate FreeAgentDesktop 100F PQ: 0 ANSI: 4
[ 12.495713] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 12.497335] sd 4:0:0:0: [sdb] Write Protect is off
[ 12.497437] sd 4:0:0:0: [sdb] Mode Sense: 1c 00 00 00
[ 12.497440] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 12.500435] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 12.502090] sd 4:0:0:0: [sdb] Write Protect is off
[ 12.502188] sd 4:0:0:0: [sdb] Mode Sense: 1c 00 00 00
[ 12.502191] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 12.502298] sdb: sdb1 sdb2
[ 12.504354] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 134.751647] eth0: link up, 100Mbps, full-duplex, lpa 0x43E1
[ 135.652058] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 136.412655] eth0: link up, 100Mbps, full-duplex, lpa 0x43E1
[ 159.330054] [drm] Initialized drm 1.1.0 20060810
[ 159.385062] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 159.385075] pci 0000:00:02.0: setting latency timer to 64
[ 159.390745] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 471.029585] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
[ 519.046392] mtrr: MTRR 3 not used
[ 519.047028] [drm] Module unloaded
[ 528.163824] [drm] Initialized drm 1.1.0 20060810
[ 546.705097] [drm:drm_init]
[ 546.705160] [drm:drm_get_dev]
[ 546.705172] pci 0000:00:02.0: setting latency timer to 64
[ 546.707283] [drm:drm_get_minor]
[ 546.707422] [drm:drm_get_minor] new minor assigned 64
[ 546.707425] [drm:drm_get_minor]
[ 546.707493] [drm:drm_get_minor] new minor assigned 0
[ 546.708644] [drm:i915_init_phys_hws] Enabled hardware status page
[ 546.708653] [drm:intel_opregion_init] graphic opregion physical addr: 0x0
[ 546.708657] [drm:intel_opregion_init] ACPI OpRegion not supported!
[ 546.708791] [drm:drm_agp_bind_pages]
[ 546.708886] [drm:parse_panel_data] Found panel mode in BIOS VBT tables:
[ 546.708891] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 0 68900 1280 1304 1336 1408 800 801 804 813 0x8 0x0
[ 546.708896] [drm:drm_irq_install] irq=16
[ 546.708920] [drm:intel_modeset_init] 2 display pipes available.
[ 546.709035] [drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs
[ 546.709058] [drm:drm_sysfs_hotplug_event] generating hotplug event
[ 546.928293] [drm:drm_sysfs_connector_add] adding "LVDS-1" to sysfs
[ 546.928992] [drm:drm_sysfs_hotplug_event] generating hotplug event
[ 546.929391] [drm:drm_sysfs_connector_add] adding "SVIDEO-1" to sysfs
[ 546.929708] [drm:drm_sysfs_hotplug_event] generating hotplug event
[ 546.929734] [drm:drm_helper_probe_single_connector_modes] VGA-1
[ 547.150345] [drm:drm_mode_debug_printmodeline] Modeline 45:"0x0" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 547.150353] [drm:drm_mode_prune_invalid] Not using 0x0 mode 16
[ 547.150367] [drm:drm_helper_probe_single_connector_modes] Probed modes for VGA-1
[ 547.150378] [drm:drm_mode_debug_printmodeline] Modeline 46:"1600x1200" 85000 229500 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 547.150389] [drm:drm_mode_debug_printmodeline] Modeline 30:"1280x1024" 75024 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 547.150401] [drm:drm_mode_debug_printmodeline] Modeline 37:"1152x864" 75000 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 547.150412] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 75075 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 547.150423] [drm:drm_mode_debug_printmodeline] Modeline 32:"1024x768" 70068 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 547.150434] [drm:drm_mode_debug_printmodeline] Modeline 33:"1024x768" 60003 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 547.150445] [drm:drm_mode_debug_printmodeline] Modeline 34:"832x624" 74550 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 547.150456] [drm:drm_mode_debug_printmodeline] Modeline 36:"800x600" 72186 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 547.150466] [drm:drm_mode_debug_printmodeline] Modeline 35:"800x600" 75000 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 547.150477] [drm:drm_mode_debug_printmodeline] Modeline 22:"800x600" 60315 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 547.150488] [drm:drm_mode_debug_printmodeline] Modeline 23:"800x600" 56249 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 547.150499] [drm:drm_mode_debug_printmodeline] Modeline 25:"640x480" 72807 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 547.150509] [drm:drm_mode_debug_printmodeline] Modeline 24:"640x480" 75000 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 547.150520] [drm:drm_mode_debug_printmodeline] Modeline 26:"640x480" 66666 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 547.150530] [drm:drm_mode_debug_printmodeline] Modeline 27:"640x480" 60000 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 547.150541] [drm:drm_mode_debug_printmodeline] Modeline 28:"720x400" 87848 35500 720 738 846 900 400 421 423 449 0x40 0xa
[ 547.150552] [drm:drm_mode_debug_printmodeline] Modeline 29:"720x400" 70080 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 547.150560] [drm:drm_helper_probe_single_connector_modes] LVDS-1
[ 547.369315] [drm:drm_helper_probe_single_connector_modes] Probed modes for LVDS-1
[ 547.369328] [drm:drm_mode_debug_printmodeline] Modeline 38:"1280x800" 60189 68900 1280 1304 1336 1408 800 801 804 813 0x48 0xa
[ 547.369337] [drm:drm_helper_probe_single_connector_modes] SVIDEO-1
[ 547.639502] [drm:drm_vblank_get] enabling vblank on crtc 0, ret: -22
[ 547.640087] [drm:intel_crtc_mode_set] Mode for pipe A:
[ 547.640096] [drm:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[ 547.660566] [drm:intel_pipe_set_base] No FB bound
[ 547.660572] [drm] TV-13: set mode NTSC 480i 0
[ 547.740781] [drm:intel_tv_detect_type] No TV connection detected
[ 547.781102] [drm:drm_helper_probe_single_connector_modes] SVIDEO-1 is disconnected
[ 547.781109] [drm:drm_setup_crtcs]
[ 547.781490] [drm:drm_enable_connectors] connector 5 enabled? yes
[ 547.781495] [drm:drm_enable_connectors] connector 7 enabled? yes
[ 547.781501] [drm:drm_enable_connectors] connector 12 enabled? no
[ 547.781506] [drm:drm_target_preferred] looking for preferred mode on connector 5
[ 547.781512] [drm:drm_target_preferred] found mode 1600x1200
[ 547.781518] [drm:drm_target_preferred] looking for preferred mode on connector 7
[ 547.781523] [drm:drm_target_preferred] found mode 1280x800
[ 547.781529] [drm:drm_setup_crtcs] picking CRTCs for 2048x2048 config
[ 547.781538] [drm:drm_setup_crtcs] desired mode 1600x1200 set on crtc 3
[ 547.781544] [drm:drm_setup_crtcs] desired mode 1280x800 set on crtc 4
[ 547.781550] [drm:intelfb_probe]
[ 547.781553] [drm:intelfb_single_fb_probe]
[ 547.781560] [drm:intelfb_single_fb_probe] creating new fb (console size 1280x800, buffer size 1600x1200)
[ 547.792676] [drm:drm_agp_bind_pages]
[ 547.804481] allocated 1600x1200 fb: 0x007df000, bo f62ca1e0
[ 547.804664] fb0: inteldrmfb frame buffer device
[ 547.804765] registered panic notifier
[ 547.804862] [drm] Initialized i915 1.6.0 20080730 on minor 0