rendered paste bodyCFE version 1.0.37-1.07 for BCM947XX (32bit,SP,LE)
Build Date: 2005\uffff\uffff 10\uffff\uffff 17\uffff\uffff \uffff\uffff\uffff\uffff\uffff\uffff 04:38:11 JST (root@ifedora)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
* cmdset: AMD Standard
* Insaner_1 = (0xa8)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* Flash Info. -> manufacturer (00), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xa8)
* cmdset: AMD Standard
* Insaner_1 = (0xa8)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* Flash Info. -> manufacturer (00), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xa8)
* cmdset: AMD Standard
* Insaner_1 = (0xa8)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* Flash Info. -> manufacturer (00), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xa8)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.39.0
* memc_config: (00048100) -> [00048000]
CPU type 0x29008: 200MHz
Total memory: 16384 KBytes
Total memory used by CFE: 0x80400000 - 0x804A29A0 (666016)
Initialized Data: 0x80438650 - 0x8043B1F0 (11168)
BSS Area: 0x8043B1F0 - 0x8043C9A0 (6064)
Local Heap: 0x8043C9A0 - 0x804A09A0 (409600)
Stack Area: 0x804A09A0 - 0x804A29A0 (8192)
Text (code) segment: 0x80400000 - 0x80438650 (230992)
Boot area (physical): 0x004A3000 - 0x004E3000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-16-01-14-0C-C2, ipaddr 192.168.11.1, mask 255.255.255.0
gateway not set, nameserver not set
Wait a few seconds for an image
Reading :: Failed.: Timeout occured
>>> boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3704 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029008
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Linux version 2.4.30 (jjones@saker) (gcc version 3.4.4 (OpenWrt-1.0)) #1 Fri Jul 21 18:02:13 CDT 2006
Setting the PFC value as 0x15
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM5352 rev 0 at 200 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.47 BogoMIPS
Memory: 14268k/16384k available (1412k kernel code, 2116k reserved, 100k data, 80k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
b44.c:v0.93 (Mar, 2004)
eth0: Broadcom 47xx 10/100BaseT Ethernet 00:16:01:14:0c:c2
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1c000000
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x003f0000 : "linux"
0x000bc400-0x0021f000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x00220000-0x003f0000 : "OpenWrt"
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 328 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 80k freed
Algorithmics/MIPS FPU Emulator v1.5
Using /lib/modules/2.4.30/diag.o
diag boardtype: 00000467
[: 0x1f: bad number
Using /lib/modules/2.4.30/switch-core.o
Using /lib/modules/2.4.30/switch-robo.o
Probing device eth0: found!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
Unlocking linux ...
init started: BusyBox v1.00 (2006.07.21-23:09+0000) multi-call binary
Please press Enter to activate this console. jffs2.bbc: SIZE compression mode activated.
eth1: Broadcom BCM4318 802.11 Wireless Controller 3.90.37.0
BFL_ENETADM not set in boardflags. Use force=1 to ignore.
device eth0 entered promiscuous mode
vlan0: dev_set_promiscuity(master, 1)
vlan0: dev_set_allmulti(master, 1)
device eth1 entered promiscuous mode
Reserved instruction in kernel code in traps.c::do_ri, line 668:
$0 : 00000000 1000fc00 000002a8 80af82a8 80384520 80af82a8 2abd83ac 00000000
$8 : 1000fc01 1000001e 2ab89000 00000001 2ab8b78c 068acf04 801e4000 00000018
$16: 80d553c0 80adc000 8038453c 2abd83ac 80384520 80d553c0 2abd83ac 80384520
$24: 8019e5d4 2abd83ac 80adc000 80adde40 00000000 800228a4
Hi : 00000000
Lo : 00019fdc
epc : 8002169c Tainted: P
Status: 1000fc03
Cause : 00000028
PrId : 00029008
Process ifconfig (pid: 266, stackpage=80adc000)
Stack: 80b04000 c0102f94 800a5310 8001c4a8 80d553c0 80adc000 8038453c
2abd83ac 80384520 80addf30 00000000 00000003 7fff77e8 8000b420 fffffff7
801a0000 1000fc00 c00eaac8 00000000 00000000 802bde60 00030002 00000000
80018278 8013e824 80d551e0 80d55af8 80d55900 00000000 8017b078 80017eb4
80002400 800242cc 80024154 80384520 00000000 8017a040 80dfd920 00000002
80addf30 ...
Call Trace: [<c0102f94>] [<800a5310>] [<8001c4a8>] [<8000b420>] [<c00eaac8>]
[<80018278>] [<8013e824>] [<80017eb4>] [<80002400>] [<800242cc>] [<80024154>]
[<8000279c>] [<8013e604>] [<8003760c>] [<8000f034>] [<8005b9dc>]
Code: 8fb00010 0800856f 27bd0020 <27bdffd8> afb40020 afb3001c afb20018 afbf0024 afb10014
Reserved instruction in kernel code in traps.c::do_ri, line 668:
$0 : 00000000 1000fc00 80190000 80d73000 80d72000 00000000 80d73000 80188b30
$8 : 00471610 0046af30 0046eb40 2ab9662c 00000d72 1000fc01 00000000 00000001
$16: 80d72000 80203798 00b7269b 80208f98 80ad6004 80d55a20 80d6ab84 803845a0
$24: ba2e8ba3 8000b9e8 80d3a000 80d3be40 801a0000 8002306c
Hi : ffffddaa
Lo : 00000b72
epc : 8000b9ec Tainted: P
Status: 1000fc03
Cause : 00000028
PrId : 00029008
Process ifup (pid: 274, stackpage=80d3a000)
Stack: 00000000 00000000 00000000 00000000 80d55a20 80d3a000 00000000
1000fc00 80190000 80d73000 80d72000 00000000 80d73000 80188b30 00471610
0046af30 0046eb40 2ab9662c 00000d72 1000fc01 00000000 00000001 80d72000
80203798 00b7269b 80208f98 80ad6004 80d55a20 80d6ab84 803845a0 ba2e8ba3
8000b9e8 00000000 00000000 80d3a000 80d3be40 801a0000 8002306c 1000fc03
00000b72 ...
Call Trace: [<8000b9e8>] [<8002306c>] [<8000b9ec>] [<8000f330>] [<8005b9dc>]
Code: 03e00008 00000000 24831000 <bc950000> bc950010 bc950020 bc950030 bc950040 bc950050
Unable to handle kernel paging request at virtual address 00000068, epc == 80126afc, ra == 80126af4
Oops in fault.c::do_page_fault, line 206:
$0 : 00000000 1000fc00 80caace0 00000001 80d8c200 80d8c180 80d8c020 1000fc01
$8 : 00000100 8013499c 00000000 00000000 803d2da0 00000001 30382030 30306131
$16: 80caace0 80edb060 80edb440 00000068 80da3ed8 00000068 00000000 00000000
$24: 00000400 2abdc0c0 80da2000 000001a0 2ac29000 80126af4
Hi : 00000000
Lo : 00000100
epc : 80126afc Tainted: P
Status: 1000fc03
Cause : 00000408
PrId : 00029008
Process (pid: 0, stackpage=80e50000)
Stack: (Bad stack address)
Call Trace: (Bad stack address)
Code: 27a70024 104000c1 00408021 <8e620000> 8e630004 8e640008 ae02002c ae030030 ae040034
Kernel panic: Attempted to kill the idle task!
In idle task - not syncing
<0>Rebooting in 3 seconds..Please stand by while rebooting the system...
CFE version 1.0.37-1.07 for BCM947XX (32bit,SP,LE)
Build Date: 2005\uffff\uffff 10\uffff\uffff 17\uffff\uffff \uffff\uffff\uffff\uffff\uffff\uffff 04:38:11 JST (root@ifedora)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
* cmdset: AMD Standard
* Insaner_1 = (0xa8)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* Flash Info. -> manufacturer (00), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xa8)
* cmdset: AMD Standard
* Insaner_1 = (0xa8)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* Flash Info. -> manufacturer (00), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xa8)
* cmdset: AMD Standard
* Insaner_1 = (0xa8)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* Flash Info. -> manufacturer (00), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xa8)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.39.0
* memc_config: (00048100) -> [00048000]
CPU type 0x29008: 200MHz
Total memory: 16384 KBytes
Total memory used by CFE: 0x80400000 - 0x804A29A0 (666016)
Initialized Data: 0x80438650 - 0x8043B1F0 (11168)
BSS Area: 0x8043B1F0 - 0x8043C9A0 (6064)
Local Heap: 0x8043C9A0 - 0x804A09A0 (409600)
Stack Area: 0x804A09A0 - 0x804A29A0 (8192)
Text (code) segment: 0x80400000 - 0x80438650 (230992)
Boot area (physical): 0x004A3000 - 0x004E3000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-16-01-14-0C-C2, ipaddr 192.168.11.1, mask 255.255.255.0
gateway not set, nameserver not set
Wait a few seconds for an image
Reading :: Failed.: Timeout occured
>>> boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3704 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029008
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Linux version 2.4.30 (jjones@saker) (gcc version 3.4.4 (OpenWrt-1.0)) #1 Fri Jul 21 18:02:13 CDT 2006
Setting the PFC value as 0x15
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM5352 rev 0 at 200 MHz
diag boardtype: 00000467
[: 0x1f: bad number
Using /lib/modules/2.4.30/switch-core.o
Using /lib/modules/2.4.30/switch-robo.o
Probing device eth0: found!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.