# -*- Mode: rpm-spec -*-## (c) Mandriva## The kernel-2.6-linus package (and so this spec file) is under development,# it does mean:## 1. You can have nasty surprises when playing with the package# generation## 2. Is easier to go and come back from Mordor than adding a new# architecture support## 3. A known architecture with just a missing .config shouldn't be too# hard, but as this spec changes too fast, it's likely to be broken# ## if you try to understand kernel numbering, read docs/kernel_naming%define kernelversion 2%define patchlevel 6%define sublevel 29# kernel Makefile extraversion is substituted by # kpatch/kstable wich are either 0 (empty), rc (kpatch) or stable release (kstable)%define kpatch rc7%define kstable 0%define ktag rt# AKPM's release%define rt_rel 1# this is the releaseversion%define mdvrelease 1# This is only to make life easier for people that creates derivated kernels# a.k.a name it kernel-tmb :)%define kname kernel-%{ktag}%define rpmtag %distsuffix%if %kpatch%define rpmrel %mkrel 0.%{kpatch}.%{ktag}%{rt_rel}.%{mdvrelease}%else%define rpmrel %mkrel 1.%{ktag}%{rt_rel}.%{mdvrelease}%endif# theese two never change, they are used to fool rpm/urpmi/smart%define fakever 1%define fakerel %mkrel 1# When we are using a pre/rc patch, the tarball is a sublevel -1%if %kpatch%define kversion %{kernelversion}.%{patchlevel}.%{sublevel}%define tar_ver %{kernelversion}.%{patchlevel}.%(expr %{sublevel} - 1)%else%if %kstable%define kversion %{kernelversion}.%{patchlevel}.%{sublevel}.%{kstable}%define tar_ver %{kernelversion}.%{patchlevel}.%{sublevel}%else%define kversion %{kernelversion}.%{patchlevel}.%{sublevel}%define tar_ver %{kversion}%endif%endif%define kverrel %{kversion}-%{rpmrel}# used for not making too long names for rpms or search paths%if %kpatch%define buildrpmrel 0.%{kpatch}.%{ktag}%{rt_rel}.%{mdvrelease}%{rpmtag}%else%define buildrpmrel 1.%{ktag}%{rt_rel}.%{mdvrelease}%{rpmtag}%endif%define buildrel %{kversion}-%{buildrpmrel}%define rt_info NOTE: This kernel has no Mandriva patches and no third-party drivers, \only Ingo Molnar -rt (realtime) series patches applied to vanille kernel.org kernels.# having different top level names for packges means that you have to remove them by hard :(%define top_dir_name %{kname}-%{_arch}%define build_dir ${RPM_BUILD_DIR}/%{top_dir_name}%define src_dir %{build_dir}/linux-%{tar_ver}# disable useless debug rpms...%define _enable_debug_packages %{nil}%define debug_package %{nil}# build defines%define build_doc 0%define build_source 1%define build_devel 1%define build_debug 1%define build_kernel 1%define distro_branch %(perl -pe '/(\\d+)\\.(\\d)\\.?(\\d)?/; $_="$1.$2"' /etc/mandriva-release)# End of user definitions%{?_without_kernel: %global build_kernel 0}%{?_without_doc: %global build_doc 0}%{?_without_source: %global build_source 0}%{?_without_devel: %global build_devel 0}%{?_with_kernel: %global build_kernel 1}%{?_with_doc: %global build_doc 1}%{?_with_source: %global build_source 1}%{?_with_devel: %global build_devel 1}%if %(if [ -z "$CC" ] ; then echo 0; else echo 1; fi)%define kmake %make CC="$CC"%else%define kmake %make %endif# there are places where parallel make don't work%define smake make# Aliases for amd64 builds (better make source links?)%define target_cpu %(echo %{_target_cpu} | sed -e "s/amd64/x86_64/")%define target_arch %(echo %{_arch} | sed -e "s/amd64/x86_64/" -e "s/sparc/%{_target_cpu}/" -e "s/i386/x86/" -e "s/x86_64/x86/")# src.rpm descriptionSummary: The Linux kernel (the core of the Linux operating system)Name: %{kname}Version: %{kversion}Release: %{rpmrel}License: GPLv2Group: System/Kernel and hardwareExclusiveArch: %{ix86} x86_64 sparc64ExclusiveOS: LinuxURL: http://www.kernel.org/###################################################################### Sources#### This is for full SRC RPMSource0: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/linux-%{tar_ver}.tar.bz2Source1: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/linux-%{tar_ver}.tar.bz2.sign# This is for disabling mrproper on -devel rpmsSource2: disable-mrproper-in-devel-rpms.patchSource4: README.kernel-sourcesSource5: README.MandrivaLinuxSource20: i386.configSource21: x86_64.configSource22: sparc64.config###################################################################### Patches## Patch0 to Patch100 are for core kernel upgrades.## Pre linus patch: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/testing%if %kpatchPatch1: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/testing/patch-%{kernelversion}.%{patchlevel}.%{sublevel}-%{kpatch}.bz2Source10: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/testing/patch-%{kernelversion}.%{patchlevel}.%{sublevel}-%{kpatch}.bz2.sign%endif%if %kstablePatch1: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/patch-%{kversion}.bz2Source10: ftp://ftp.kernel.org/pub/linux/kernel/v%{kernelversion}.%{patchlevel}/patch-%{kversion}.bz2.sign%endif# Mingos patches%if %kpatchPatch2: http://www.kernel.org/pub/linux/kernel/projects/rt/patch-%{kversion}-%{kpatch}-%{ktag}%{rt_rel}.patch.bz2#Source11: http://www.kernel.org/pub/linux/kernel/projects/rt/patch-%{kversion}-%{kpatch}-%{ktag}%{rt_rel}.bz2.sign%elsePatch2: http://www.kernel.org/pub/linux/kernel/projects/rt/patch-%{kversion}-%{ktag}%{rt_rel}.patch.bz2#Source11: http://www.kernel.org/pub/linux/kernel/projects/rt/patch-%{kversion}-%{ktag}%{rt_rel}.bz2.sign%endif# LKML's patches# MDV Patches#END##################################################################### Defines for the things that are needed for all the kernels%define requires1 module-init-tools >= 3.0-%mkrel 7%define requires2 mkinitrd >= 3.4.43-%mkrel 10%define requires3 bootloader-utils >= 1.9%define requires4 sysfsutils module-init-tools >= 0.9.15%define requires5 kernel-firmware >= 2.6.27-0.rc2.2mdv%define kprovides kernel = %{tar_ver}, alsaConflicts: drakxtools-backend < 10.4.140BuildRoot: %{_tmppath}/%{name}-%{kversion}-build-%{_arch}Autoreqprov: noBuildRequires: gcc module-init-tools >= 0.9.15%descriptionSource package to build the Linux kernel.%{rt_info}## kernel: Symmetric MultiProcessing kernel#%if %build_kernel%package -n %{kname}-%{buildrel}Version: %{fakever}Release: %{fakerel}Summary: The Linux Kernel compiled for SMP machinesGroup: System/Kernel and hardwareProvides: %kprovidesRequires: %requires1Requires: %requires2Requires: %requires3Requires: %requires4Requires: %requires5%description -n %{kname}-%{buildrel}This package includes a SMP version of the Linux %{kversion} kernel. It isrequired only on machines with two or more CPUs, although it should workfine on single-CPU boxes.This kernel relies on in-kernel smp alternatives to switch between up & smp mode depending on detected hardware. To force the kernelto boot in single processor mode, use the "nosmp" boot parameter.For instructions for update, see:http://www.mandriva.com/en/security/kernelupdate%{rt_info}%endif # build_kernel## kernel-source: kernel sources#%if %build_source%package -n %{kname}-source-%{buildrel}Version: %{fakever}Release: %{fakerel}Provides: %{kname}-source, kernel-source = %{kverrel}, kernel-devel = %{kverrel}Provides: %{kname}-source-%{kernelversion}.%{patchlevel}Requires: glibc-devel, ncurses-devel, make, gcc, perlSummary: The source code for the Linux kernelGroup: Development/KernelAutoreqprov: no%description -n %{kname}-source-%{buildrel}The %{kname}-source package contains the source code files for the Linux kernel. Theese source files are only needed if you want to build your own custom kernel that is better tuned to your particular hardware.If you only want the files needed to build 3rdparty (nVidia, Ati, dkms-*,...)drivers against, install the *-devel-* rpm that is matching your kernel.For instructions for update, see:http://www.mandriva.com/en/security/kernelupdate%{rt_info}%endif # build_source# # kernel-devel: stripped kernel sources#%if %build_devel%package -n %{kname}-devel-%{buildrel}Version: %{fakever}Release: %{fakerel}Provides: kernel-devel = %{kverrel}Summary: The %{kname} devel files for 3rdparty modules buildGroup: Development/KernelAutoreqprov: noRequires: glibc-devel, ncurses-devel, make, gcc, perl%description -n %{kname}-devel-%{buildrel}This package contains the kernel-devel files that should be enough to build 3rdparty drivers against for use with the %{kname}-%{buildrel}.If you want to build your own kernel, you need to install the full %{kname}-source-%{buildrel} rpm.%{rt_info}%endif # build_devel# # kernel-debug: unstripped kernel vmlinux#%if %build_debug%package -n %{kname}-debug-%{buildrel}Version: %{fakever}Release: %{fakerel}Provides: kernel-debug = %{kverrel}Summary: The %{kname} debug filesGroup: Development/KernelAutoreqprov: noRequires: glibc-devel%description -n %{kname}-debug-%{buildrel}This package contains the kernel-debug files that should be enough to use debugging/monitoring tool (like systemtap, oprofile, ...)%{rt_info}%endif # build_debug## kernel-doc: documentation for the Linux kernel#%if %build_doc%package -n %{kname}-doc-%{buildrel}Version: %{fakever}Release: %{fakerel}Summary: Various documentation bits found in the kernel sourceGroup: Books/Computer books%description -n %{kname}-doc-%{buildrel}This package contains documentation files form the kernel source. Variousbits of information about the Linux kernel and the device drivers shippedwith it are documented in these files. You also might want install thispackage if you need a reference to the options that can be passed to Linuxkernel modules at load time.For instructions for update, see:http://www.mandriva.com/en/security/kernelupdate%{rt_info}%endif # build_doc## kernel-latest: virtual rpm#%if %build_kernel%package -n %{kname}-latestVersion: %{kversion}Release: %{rpmrel}Summary: Virtual rpm for latest %{kname}Group: System/Kernel and hardwareRequires: %{kname}-%{buildrel}Obsoletes: %{kname}-smp-latest%description -n %{kname}-latestThis package is a virtual rpm that aims to make sure you always have thelatest %{kname} installed...%{rt_info}%endif # build_kernel## kernel-source-latest: virtual rpm#%if %build_source%package -n %{kname}-source-latestVersion: %{kversion}Release: %{rpmrel}Summary: Virtual rpm for latest %{kname}-sourceGroup: System/Kernel and hardwareRequires: %{kname}-source-%{buildrel}%description -n %{kname}-source-latestThis package is a virtual rpm that aims to make sure you always have thelatest %{kname}-source installed...%{rt_info}%endif # build_source## kernel-devel-latest: virtual rpm#%if %build_devel%package -n %{kname}-devel-latestVersion: %{kversion}Release: %{rpmrel}Summary: Virtual rpm for latest %{kname}-develGroup: System/Kernel and hardwareRequires: %{kname}-devel-%{buildrel}Obsoletes: %{kname}-headers-latestObsoletes: %{kname}-smp-devel-latestObsoletes: %{kname}-smp-headers-latest%description -n %{kname}-devel-latestThis package is a virtual rpm that aims to make sure you always have thelatest %{kname}-devel installed...%{rt_info}%endif # build_devel## kernel-debug-latest: virtual rpm#%if %build_debug%package -n %{kname}-debug-latestVersion: %{kversion}Release: %{rpmrel}Summary: Virtual rpm for latest %{kname}-debugGroup: System/Kernel and hardwareRequires: %{kname}-debug-%{buildrel}%description -n %{kname}-debug-latestThis package is a virtual rpm that aims to make sure you always have thelatest %{kname}-debug installed...%{rt_info}%endif # build_debug## kernel-doc-latest: virtual rpm#%if %build_doc%package -n %{kname}-doc-latestVersion: %{kversion}Release: %{rpmrel}Summary: Virtual rpm for latest %{kname}-docGroup: System/Kernel and hardwareRequires: %{kname}-doc-%{buildrel}%description -n %{kname}-doc-latestThis package is a virtual rpm that aims to make sure you always have thelatest %{kname}-doc installed...%{rt_info}%endif## End packages - here begins build stage#%prep%setup -q -n %top_dir_name -cpushd %src_dir%if %kpatch%patch1 -p1%endif%if %kstable%patch1 -p1%endif# Mingo's patch%patch2 -p1# LKML's patches# MDV Patchespopd# PATCH END## Setup Begin#pushd ${RPM_SOURCE_DIR}## Copy our defconfigs into place.cp -f %{_arch}.config %{build_dir}/linux-%{tar_ver}/arch/%{target_arch}/defconfigpopd# make sure the kernel has the sublevel we know it has...LC_ALL=C perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{sublevel}/" linux-%{tar_ver}/Makefile# remove localversion-tip filerm -f linux-%{tar_ver}/localversion-tip%build# Common target directories%define _kerneldir /usr/src/%{kname}-%{buildrel}%define _bootdir /boot%define _modulesdir /lib/modules%define _develdir /usr/src/%{kname}-devel-%{buildrel}# Directories definition needed for building%define temp_root %{build_dir}/temp-root%define temp_source %{temp_root}%{_kerneldir}%define temp_boot %{temp_root}%{_bootdir}%define temp_modules %{temp_root}%{_modulesdir}%define temp_devel %{temp_root}%{_develdir}PrepareKernel() { name=$1 extension=$2 echo "Prepare compilation of kernel $extension" if [ "$name" ]; then config_name="defconfig-$name" else config_name="defconfig" fi # make sure EXTRAVERSION says what we want it to say %if %kstable LC_ALL=C perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = .%{kstable}-$extension/" Makefile %else LC_ALL=C perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -$extension/" Makefile %endif ### FIXME MDV bugs #29744, #29074, will be removed when fixed upstream LC_ALL=C perl -p -i -e "s/^source/### source/" drivers/crypto/Kconfig %smake -s mrproper cp arch/%{target_arch}/$config_name .config %smake oldconfig}BuildKernel() { KernelVer=$1 echo "Building kernel $KernelVer" %kmake all ## Start installing stuff install -d %{temp_boot} install -m 644 System.map %{temp_boot}/System.map-$KernelVer install -m 644 .config %{temp_boot}/config-$KernelVer %ifarch sparc64 gzip -9c vmlinux > %{temp_boot}/vmlinuz-$KernelVer cp -f vmlinux %{temp_boot}/vmlinux-$KernelVer %else cp -f arch/%{target_arch}/boot/bzImage %{temp_boot}/vmlinuz-$KernelVer cp -f vmlinux %{temp_boot}/vmlinux-$KernelVer %endif # modules install -d %{temp_modules}/$KernelVer %smake INSTALL_MOD_PATH=%{temp_root} KERNELRELEASE=$KernelVer modules_install # remove /lib/firmware, we use a separate kernel-firmware rm -rf %{temp_root}/lib/firmware}SaveDevel() { flavour=$1 if [ "$flavour" = "up" ]; then DevelRoot=%{temp_devel} else DevelRoot=%{temp_smp_devel} fi mkdir -p $DevelRoot for i in $(find . -name 'Makefile*'); do cp -R --parents $i $DevelRoot;done for i in $(find . -name 'Kconfig*' -o -name 'Kbuild*'); do cp -R --parents $i $DevelRoot;done cp -fR include $DevelRoot cp -fR scripts $DevelRoot %ifarch %{ix86} x86_64 cp -fR arch/x86/kernel/asm-offsets.{c,s} $DevelRoot/arch/x86/kernel/ cp -fR arch/x86/kernel/asm-offsets_{32,64}.c $DevelRoot/arch/x86/kernel/ %else cp -fR arch/%{target_arch}/kernel/asm-offsets.{c,s} $DevelRoot/arch/%{target_arch}/kernel/ %endif cp -fR .config Module.symvers $DevelRoot # Needed for truecrypt build (Danny) cp -fR drivers/md/dm.h $DevelRoot/drivers/md/ # fix permissions chmod -R a+rX $DevelRoot}SaveDebug() { kernversion=$1 flavour=$2 echo "SaveDebug $kernversion $flavour" kernel_debug_files=../kernel_debug_files.$flavour echo "%defattr(-,root,root)" > $kernel_debug_files echo "%{_bootdir}/vmlinux-$kernversion" >> $kernel_debug_files find %{temp_modules}/$kernversion/kernel \ -name "*.ko" -exec objcopy --only-keep-debug '{}' '{}'.debug \; find %{temp_modules}/$kernversion/kernel \ -name "*.ko" -exec objcopy --add-gnu-debuglink='{}'.debug --strip-debug '{}' \; pushd %{temp_modules} find $kernversion/kernel -name "*.ko.debug" > debug_module_list popd cat %{temp_modules}/debug_module_list | sed 's|\(.*\)|%{_modulesdir}/\1|' >> $kernel_debug_files cat %{temp_modules}/debug_module_list | sed 's|\(.*\)|%exclude %{_modulesdir}/\1|' >> ../kernel_exclude_debug_files.$flavour rm -f %{temp_modules}/debug_module_list}CreateFiles() { kernversion=$1 flavour=$2 echo "CreateFiles $kernversion $flavour" output=../kernel_files.$kernversion echo "%defattr(-,root,root)" > $output echo "%{_bootdir}/config-${kernversion}" >> $output echo "%{_bootdir}/vmlinuz-${kernversion}" >> $output echo "%{_bootdir}/System.map-${kernversion}" >> $output echo "%dir %{_modulesdir}/${kernversion}/" >> $output echo "%{_modulesdir}/${kernversion}/kernel" >> $output echo "%{_modulesdir}/${kernversion}/modules.*" >> $output echo "%doc README.kernel-sources" >> $output echo "%doc README.MandrivaLinux" >> $output cat ../kernel_exclude_debug_files.$flavour >> $output}CreateKernel() { flavour=$1 echo "CreateKernel $flavour" if [ "$flavour" = "up" ]; then KernelVer=%{buildrel} PrepareKernel "" %{buildrpmrel} else KernelVer=%{buildrel}$flavour PrepareKernel $flavour %{buildrpmrel}$flavour fi BuildKernel $KernelVer %if %build_devel SaveDevel $flavour %endif %if %build_debug SaveDebug $KernelVer $flavour %endif CreateFiles $KernelVer $flavour}#### DO it...#### Create a simulacro of buildrootrm -rf %{temp_root}install -d %{temp_root}#make sure we are in the directorycd %src_dir%if %build_kernelCreateKernel up%endif# We don't make to repeat the depend code at the install phase%if %build_sourcePrepareKernel "" %{buildrpmrel}custom# From > 2.6.13 prepare-all is deprecated and relies on include/linux/autoconf# To have modpost and others scripts, one has to use the target scripts%smake -s prepare%smake -s scripts%endif###### install###%install# on ne strippe pas vmlinuxEXCLUDE_FROM_STRIP="%{_bootdir}/vmlinux"export EXCLUDE_FROM_STRIPinstall -m 644 %{SOURCE4} .install -m 644 %{SOURCE5} .cd %src_dir# Directories definition needed for installing%define target_source %{buildroot}/%{_kerneldir}%define target_boot %{buildroot}%{_bootdir}%define target_modules %{buildroot}%{_modulesdir}%define target_devel %{buildroot}%{_develdir}# We want to be able to test several times the install partrm -rf %{buildroot}cp -a %{temp_root} %{buildroot}# Create directories infastructure%if %build_sourceinstall -d %{target_source} tar cf - . | tar xf - -C %{target_source}chmod -R a+rX %{target_source}# we remove all the source files that we don't ship# first architecture filesfor i in alpha arm arm26 avr32 blackfin cris frv h8300 ia64 mips m32r m68k m68knommu mn10300 parisc powerpc ppc sh sh64 s390 v850 xtensa; do rm -rf %{target_source}/arch/$i rm -rf %{target_source}/include/asm-$i%if %build_devel%if %build_kernel rm -rf %{target_devel}/arch/$i rm -rf %{target_devel}/include/asm-$i%endif # build_kernel# Needed for truecrypt build (Danny)%if %build_kernel cp -fR drivers/md/dm.h %{target_devel}/drivers/md/%endif # build_kernel%endif # build_develdone# remove arch files based on target arch%ifnarch %{ix86} x86_64 rm -rf %{target_source}/arch/x86 rm -rf %{target_source}/include/asm-x86%if %build_devel%if %build_kernel rm -rf %{target_devel}/arch/x86 rm -rf %{target_devel}/include/asm-x86%endif # build_kernel%endif # build_devel%endif # ifnarch %{ix86} x86_64%ifnarch sparc sparc64 rm -rf %{target_source}/arch/sparc rm -rf %{target_source}/arch/sparc64 rm -rf %{target_source}/include/asm-sparc rm -rf %{target_source}/include/asm-sparc64%if %build_devel%if %build_kernel rm -rf %{target_devel}/arch/sparc rm -rf %{target_devel}/arch/sparc64 rm -rf %{target_devel}/include/asm-sparc rm -rf %{target_devel}/include/asm-sparc64%endif # build_kernel%endif # build_devel%endif # ifnarch sparc sparc64# other misc filesrm -f %{target_source}/{.config.old,.config.cmd,.tmp_gas_check,.mailmap,.missing-syscalls.d,.mm,arch/.gitignore}# disable mrproper in -devel rpms%if %build_devel%if %build_kernelpatch -p1 -d %{target_devel} -i %{SOURCE2}%endif # build_kernel%endif # build_devel#endif %build_source%endif# gzipping modulesfind %{target_modules} -name "*.ko" | xargs gzip -9# We used to have a copy of PrepareKernel here# Now, we make sure that the thing in the linux dir is what we want it to befor i in %{target_modules}/*; do rm -f $i/build $i/source $i/modules.*done# sniff, if we gzipped all the modules, we change the stamp :(# we really need the depmod -ae herepushd %{target_modules}for i in *; do /sbin/depmod -u -ae -b %{buildroot} -r -F %{target_boot}/System.map-$i $i echo $?donefor i in *; do pushd $i echo "Creating module.description for $i" modules=`find . -name "*.ko.gz"` echo $modules | xargs /sbin/modinfo-25 \ | perl -lne 'print "$name\t$1" if $name && /^description:\s*(.*)/; $name = $1 if m!^filename:\s*(.*)\.k?o!; $name =~ s!.*/!!' > modules.description popddonepopd###### clean###%cleanrm -rf %{buildroot}# We don't want to remove this, the whole reason of its existence is to be # able to do several rpm --short-circuit -bi for testing install # phase without repeating compilation phase#rm -rf %{temp_root} ###### scripts###### kernel%preun -n %{kname}-%{buildrel}/sbin/installkernel -R %{buildrel}if [ -L /lib/modules/%{buildrel}/build ]; then rm -f /lib/modules/%{buildrel}/buildfiif [ -L /lib/modules/%{buildrel}/source ]; then rm -f /lib/modules/%{buildrel}/sourcefiexit 0%post -n %{kname}-%{buildrel}/sbin/installkernel -L %{buildrel}if [ -d /usr/src/%{kname}-devel-%{buildrel} ]; then ln -sf /usr/src/%{kname}-devel-%{buildrel} /lib/modules/%{buildrel}/build ln -sf /usr/src/%{kname}-devel-%{buildrel} /lib/modules/%{buildrel}/sourcefi%postun -n %{kname}-%{buildrel}/sbin/kernel_remove_initrd %{buildrel}### kernel-devel%post -n %{kname}-devel-%{buildrel}# place /build and /source symlinks in place.if [ -d /lib/modules/%{buildrel} ]; then ln -sf /usr/src/%{kname}-devel-%{buildrel} /lib/modules/%{buildrel}/build ln -sf /usr/src/%{kname}-devel-%{buildrel} /lib/modules/%{buildrel}/sourcefi%preun -n %{kname}-devel-%{buildrel}# we need to delete <modules>/{build,source} at uninstallif [ -L /lib/modules/%{buildrel}/build ]; then rm -f /lib/modules/%{buildrel}/buildfiif [ -L /lib/modules/%{buildrel}/source ]; then rm -f /lib/modules/%{buildrel}/sourcefiexit 0### kernel-source%post -n %{kname}-source-%{buildrel}for i in /lib/modules/%{buildrel}*; do if [ -d $i ]; then rm -f $i/{build,source} ln -sf /usr/src/%{kname}-%{buildrel} $i/build ln -sf /usr/src/%{kname}-%{buildrel} $i/source fidone%preun -n %{kname}-source-%{buildrel}for i in /lib/modules/%{buildrel}/{build,source}; do if [ -L $i ]; then rm -f $i fidoneexit 0###### file lists##### kernel#%if %build_kernel%files -n %{kname}-%{buildrel} -f kernel_files.%{buildrel}%endif # build_kernel## kernel-source#%if %build_source%files -n %{kname}-source-%{buildrel}%defattr(-,root,root)%dir %{_kerneldir}%dir %{_kerneldir}/arch%dir %{_kerneldir}/include%{_kerneldir}/.config%{_kerneldir}/.gitignore%{_kerneldir}/COPYING%{_kerneldir}/CREDITS%{_kerneldir}/Documentation%{_kerneldir}/Kbuild%{_kerneldir}/MAINTAINERS%{_kerneldir}/Makefile%{_kerneldir}/README%{_kerneldir}/REPORTING-BUGS#{_kerneldir}/Module.markers%{_kerneldir}/arch/Kconfig%ifarch sparc sparc64%{_kerneldir}/arch/sparc%{_kerneldir}/arch/sparc64%endif%ifarch %{ix86} x86_64%{_kerneldir}/arch/x86%endif%{_kerneldir}/arch/um%{_kerneldir}/block%{_kerneldir}/crypto%{_kerneldir}/drivers%{_kerneldir}/fs%{_kerneldir}/firmware%{_kerneldir}/include/Kbuild%{_kerneldir}/include/acpi%{_kerneldir}/include/asm%{_kerneldir}/include/asm-generic%ifarch sparc sparc64%{_kerneldir}/include/asm-sparc%{_kerneldir}/include/asm-sparc64%endif%ifarch %{ix86} x86_64%{_kerneldir}/include/asm-x86%endif%{_kerneldir}/include/config%{_kerneldir}/include/crypto%{_kerneldir}/include/drm%{_kerneldir}/include/linux%{_kerneldir}/include/math-emu%{_kerneldir}/include/net%{_kerneldir}/include/pcmcia%{_kerneldir}/include/scsi%{_kerneldir}/include/trace%{_kerneldir}/include/sound%{_kerneldir}/include/video%{_kerneldir}/include/media%{_kerneldir}/include/mtd%{_kerneldir}/include/rxrpc%{_kerneldir}/include/keys%{_kerneldir}/include/rdma%{_kerneldir}/include/xen%{_kerneldir}/init%{_kerneldir}/ipc%{_kerneldir}/kernel%{_kerneldir}/lib%{_kerneldir}/mm%{_kerneldir}/net%{_kerneldir}/samples%{_kerneldir}/security%{_kerneldir}/scripts%{_kerneldir}/sound%{_kerneldir}/usr%{_kerneldir}/virt/kvm%doc README.kernel-sources%doc README.MandrivaLinux%endif## kernel-devel#%if %build_devel%files -n %{kname}-devel-%{buildrel}%defattr(-,root,root)%dir %{_develdir}%dir %{_develdir}/arch%dir %{_develdir}/include%{_develdir}/.config%{_develdir}/Documentation%{_develdir}/Kbuild%{_develdir}/Makefile%{_develdir}/Module.symvers%{_develdir}/arch/Kconfig%ifarch sparc sparc64%{_develdir}/arch/sparc%{_develdir}/arch/sparc64%endif%ifarch %{ix86} x86_64%{_develdir}/arch/x86%endif%{_develdir}/arch/um%{_develdir}/block%{_develdir}/crypto%{_develdir}/drivers%{_develdir}/firmware%{_develdir}/fs%{_develdir}/include/Kbuild%{_develdir}/include/acpi%{_develdir}/include/asm%{_develdir}/include/asm-generic%ifarch sparc sparc64%{_develdir}/include/asm-sparc%{_develdir}/include/asm-sparc64%endif%ifarch %{ix86} x86_64%{_develdir}/include/asm-x86%endif%{_develdir}/include/config%{_develdir}/include/crypto%{_develdir}/include/drm%{_develdir}/include/keys%{_develdir}/include/linux%{_develdir}/include/math-emu%{_develdir}/include/mtd%{_develdir}/include/net%{_develdir}/include/pcmcia%{_develdir}/include/rdma%{_develdir}/include/scsi%{_develdir}/include/sound%{_develdir}/include/trace%{_develdir}/include/video%{_develdir}/include/media%{_develdir}/include/rxrpc%{_develdir}/include/xen%{_develdir}/init%{_develdir}/ipc%{_develdir}/kernel%{_develdir}/lib%{_develdir}/mm%{_develdir}/net%{_develdir}/samples%{_develdir}/scripts%{_develdir}/security%{_develdir}/sound%{_develdir}/usr%doc README.kernel-sources%doc README.MandrivaLinux%endif # kernel_devel## kernel-debug#%if %build_debug%files -n %{kname}-debug-%{buildrel} -f kernel_debug_files.up%endif # build_debug## kernel-doc#%if %build_doc%files -n %{kname}-doc-%{buildrel}%defattr(-,root,root)%doc linux-%{tar_ver}/Documentation/*%endif # kernel_doc## kernel-latest#%if %build_kernel%files -n %{kname}-latest%defattr(-,root,root)%endif # build_kernel## kernel-source-latest#%if %build_source%files -n %{kname}-source-latest%defattr(-,root,root)%endif## kernel-devel-latest#%if %build_devel%files -n %{kname}-devel-latest%defattr(-,root,root)%endif # build_devel## kernel-debug-latest#%if %build_debug%files -n %{kname}-debug-latest%defattr(-,root,root)%endif # build_debug## kernel-doc-latest#%if %build_doc%files -n %{kname}-doc-latest%defattr(-,root,root)%endif # build_doc