rendered paste bodyInitializing cgroup subsys cpusetLinux version 2.6.27.14-server-1mnb (qateam@titan.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP Wed Feb 18 03:24:00 EST 2009BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfd70000 (usable) BIOS-e820: 00000000bfd70000 - 00000000bfdbf000 (reserved) BIOS-e820: 00000000bfdbf000 - 00000000bfe58000 (usable) BIOS-e820: 00000000bfe58000 - 00000000bfebf000 (ACPI NVS) BIOS-e820: 00000000bfebf000 - 00000000bfeed000 (usable) BIOS-e820: 00000000bfeed000 - 00000000bfeff000 (ACPI data) BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable) BIOS-e820: 00000000e0000000 - 00000000e1000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable)DMI 2.4 present.last_pfn = 0x140000 max_arch_pfn = 0x1000000x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106kernel direct mapping tables up to 38000000 @ 7000-c000NX (Execute Disable) protection: activeRAMDISK: 37c73000 - 37fef895ACPI: RSDP 000FE020, 0024 (r2 HP )ACPI: XSDT BFEFE120, 005C (r1 HPQOEM SLIC-MPC 1 1000013)ACPI: FACP BFEFD000, 00F4 (r4 HP TRINITY 3 LOHR 1000013)ACPI: DSDT BFEF0000, 9F33 (r1 HP TRINITY F0000000 LOHR 1000013)ACPI: FACS BFE61000, 0040ACPI: HPET BFEFC000, 0038 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013)ACPI: APIC BFEFB000, 0084 (r2 HPQOEM SLIC-MPC 1 LOHR 1000013)ACPI: MCFG BFEFA000, 003C (r1 HPQOEM SLIC-MPC 1 LOHR 1000013)ACPI: BOOT BFEEF000, 0028 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013)ACPI: SLIC BFEEE000, 0176 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013)ACPI: SSDT BFEED000, 0386 (r1 AMD PowerNow 1 AMD 1)ACPI: DMI detected: Hewlett-Packard4224MB HIGHMEM available.896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000(9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00005bf8c0] TEXT DATA BSS ==> [0000100000 - 00005bf8c0] #4 [0037c73000 - 0037fef895] RAMDISK ==> [0037c73000 - 0037fef895] #5 [00005c0000 - 00005c7000] INIT_PG_TABLE ==> [00005c0000 - 00005c7000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x00140000Movable zone start PFN for each nodeearly_node_map[6] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bfd70 0: 0x000bfdbf -> 0x000bfe58 0: 0x000bfebf -> 0x000bfeed 0: 0x000bfeff -> 0x000bff00 0: 0x00100000 -> 0x00140000On node 0 totalpages: 1048023free_area_init_node: node 0, pgdat c04b4700, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 810296 pages, LIFO batch:31ACPI: PM-Timer IO Port: 0x408ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode: Flat. Using 1 I/O APICsACPI: HPET id: 0x1002a201 base: 0xfed00000Using ACPI (MADT) for SMP configuration informationSMP: Allowing 4 CPUs, 2 hotplug CPUsmapped APIC to ffffb000 (fee00000)mapped IOAPIC to ffffa000 (fec00000)PM: Registered nosave memory: 000000000009f000 - 00000000000a0000PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000PM: Registered nosave memory: 00000000000e0000 - 0000000000100000Allocating PCI resources starting at c0000000 (gap: bff00000:20100000)PERCPU: Allocating 45212 bytes of per cpu dataNR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037783Kernel command line: BOOT_IMAGE=linux root=UUID=e3610402-a832-11dd-8aad-001eec9f4dd3 resume=UUID=ca2c626e-a496-11dd-ad15-001eec9f4dd3 splash=silent vga=788Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0PID hash table entries: 4096 (order: 12, 16384 bytes)TSC: PIT calibration confirmed by PMTIMER.TSC: using PMTIMER calibration valueDetected 2100.064 MHz processor.Console: colour dummy device 80x25console [tty0] enabledDentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 4140708k/5242880k available (2658k kernel code, 50504k reserved, 1240k data, 376k init, 3274976k highmem)virtual kernel memory layout: fixmap : 0xffe18000 - 0xfffff000 (1948 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04d6000 - 0xc0534000 ( 376 kB) .data : 0xc0398816 - 0xc04ceb80 (1240 kB) .text : 0xc0100000 - 0xc0398816 (2658 kB)Checking if this processor honours the WP bit even in supervisor mode...Ok.CPA: page pool initialized 1 of 1 pages preallocatedSLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1hpet clockevent registeredCalibrating delay loop (skipped), value calculated using timer frequency.. 4200.12 BogoMIPS (lpj=21000640)Security Framework initializedAppArmor: AppArmor disabled by boottime parameter Mount-cache hash table entries: 512Hook version: 2.6.27-2.3 2008/08/29Initializing cgroup subsys nsInitializing cgroup subsys cpuacctCPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)CPU: L2 Cache: 1024K (64 bytes/line)CPU 0(2) -> Core 0Intel machine check architecture supported.Intel machine check reporting enabled on CPU#0.using C1E aware idle routineChecking 'hlt' instruction... OK.Early unpacking initramfs... doneFreeing initrd memory: 3570k freedACPI: Core revision 20080609ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.ENABLING IO-APIC IRQs..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1CPU0: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 stepping 01Booting processor 1/1 ip 6000Initializing CPU#1Calibrating delay using timer specific routine.. 4189.76 BogoMIPS (lpj=20948846)CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)CPU: L2 Cache: 1024K (64 bytes/line)CPU 1(2) -> Core 1Intel machine check architecture supported.Intel machine check reporting enabled on CPU#1.x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106CPU1: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 stepping 01checking TSC synchronization [CPU#0 -> CPU#1]:Measured 202327772 cycles TSC warp between CPUs, turning off TSC clock.Marking TSC unstable due to check_tsc_sync_source failedBrought up 2 CPUsTotal of 2 processors activated (8389.89 BogoMIPS).CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0net_namespace: 840 bytesBooting paravirtualized kernel on bare hardwareNET: Registered protocol family 16ACPI: bus type pci registeredPCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 15PCI: MCFG area at e0000000 reserved in E820PCI: Using MMCONFIG for extended config spacePCI: Using configuration type 1 for base accessACPI: EC: Look up EC in DSDTACPI: BIOS _OSI(Linux) query ignored via DMIACPI: Interpreter enabledACPI: (supports S0 S1 S3 S4 S5)ACPI: Using IOAPIC for interrupt routingACPI: EC: non-query interrupt received, switching to interrupt modeACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62ACPI: EC: driver started in interrupt modeACPI: PCI Root Bridge [PCI0] (0000:00)pci 0000:00:02.0: PME# supported from D0 D3hot D3coldpci 0000:00:02.0: PME# disabledpci 0000:00:04.0: PME# supported from D0 D3hot D3coldpci 0000:00:04.0: PME# disabledpci 0000:00:05.0: PME# supported from D0 D3hot D3coldpci 0000:00:05.0: PME# disabledpci 0000:00:06.0: PME# supported from D0 D3hot D3coldpci 0000:00:06.0: PME# disabledpci 0000:00:07.0: PME# supported from D0 D3hot D3coldpci 0000:00:07.0: PME# disabledPCI: 0000:00:11.0 reg 10 io port: [8038, 803f]PCI: 0000:00:11.0 reg 14 io port: [804c, 804f]PCI: 0000:00:11.0 reg 18 io port: [8030, 8037]PCI: 0000:00:11.0 reg 1c io port: [8048, 804b]PCI: 0000:00:11.0 reg 20 io port: [8010, 801f]PCI: 0000:00:11.0 reg 24 32bit mmio: [d2508000, d25083ff]PCI: 0000:00:12.0 reg 10 32bit mmio: [d2507000, d2507fff]PCI: 0000:00:12.1 reg 10 32bit mmio: [d2506000, d2506fff]PCI: 0000:00:12.2 reg 10 32bit mmio: [d2508500, d25085ff]pci 0000:00:12.2: supports D1pci 0000:00:12.2: supports D2pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hotpci 0000:00:12.2: PME# disabledPCI: 0000:00:13.0 reg 10 32bit mmio: [d2505000, d2505fff]PCI: 0000:00:13.1 reg 10 32bit mmio: [d2504000, d2504fff]PCI: 0000:00:13.2 reg 10 32bit mmio: [d2508400, d25084ff]pci 0000:00:13.2: supports D1pci 0000:00:13.2: supports D2pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hotpci 0000:00:13.2: PME# disabledPCI: 0000:00:14.1 reg 10 io port: [0, 7]PCI: 0000:00:14.1 reg 14 io port: [0, 3]PCI: 0000:00:14.1 reg 18 io port: [0, 7]PCI: 0000:00:14.1 reg 1c io port: [0, 3]PCI: 0000:00:14.1 reg 20 io port: [8000, 800f]PCI: 0000:00:14.2 reg 10 64bit mmio: [d2500000, d2503fff]pci 0000:00:14.2: PME# supported from D0 D3hot D3coldpci 0000:00:14.2: PME# disabledPCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]PCI: 0000:01:00.0 reg 14 io port: [7000, 70ff]PCI: 0000:01:00.0 reg 18 32bit mmio: [d2400000, d240ffff]PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff]pci 0000:01:00.0: supports D1pci 0000:01:00.0: supports D2PCI: 0000:01:00.1 reg 10 32bit mmio: [d2410000, d2413fff]pci 0000:01:00.1: supports D1pci 0000:01:00.1: supports D2PCI: bridge 0000:00:02.0 io port: [7000, 7fff]PCI: bridge 0000:00:02.0 32bit mmio: [d2400000, d24fffff]PCI: bridge 0000:00:02.0 64bit mmio pref: [c0000000, cfffffff]PCI: bridge 0000:00:04.0 io port: [3000, 6fff]PCI: bridge 0000:00:04.0 32bit mmio: [d1400000, d23fffff]PCI: bridge 0000:00:04.0 64bit mmio pref: [d0000000, d0ffffff]PCI: 0000:08:00.0 reg 10 32bit mmio: [d1300000, d13007ff]PCI: 0000:08:00.0 reg 14 32bit mmio: [d1300d00, d1300d7f]PCI: 0000:08:00.0 reg 20 32bit mmio: [d1300c80, d1300cff]PCI: 0000:08:00.0 reg 24 32bit mmio: [d1300c00, d1300c7f]PCI: 0000:08:00.1 reg 10 32bit mmio: [d1300b00, d1300bff]PCI: 0000:08:00.2 reg 10 32bit mmio: [d1300a00, d1300aff]PCI: 0000:08:00.3 reg 10 32bit mmio: [d1300900, d13009ff]PCI: 0000:08:00.4 reg 10 32bit mmio: [d1300800, d13008ff]PCI: bridge 0000:00:05.0 32bit mmio: [d1300000, d13fffff]PCI: 0000:09:00.0 reg 10 64bit mmio: [d1200000, d120ffff]Pre-1.1 PCIe device detected, disable ASPM for 0000:00:06.0. It can be enabled forcedly with 'pcie_aspm=force'PCI: bridge 0000:00:06.0 32bit mmio: [d1200000, d12fffff]PCI: 0000:0a:00.0 reg 10 io port: [2000, 20ff]PCI: 0000:0a:00.0 reg 18 64bit mmio: [d1100000, d1100fff]PCI: 0000:0a:00.0 reg 20 64bit mmio: [d1000000, d100ffff]PCI: 0000:0a:00.0 reg 30 32bit mmio: [fffe0000, ffffffff]pci 0000:0a:00.0: supports D1pci 0000:0a:00.0: supports D2pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3coldpci 0000:0a:00.0: PME# disabledPCI: bridge 0000:00:07.0 io port: [2000, 2fff]PCI: bridge 0000:00:07.0 32bit mmio: [d1100000, d11fffff]PCI: bridge 0000:00:07.0 64bit mmio pref: [d1000000, d10fffff]pci 0000:00:14.4: transparent bridgePCI: bridge 0000:00:14.4 io port: [1000, 1fff]bus 00 -> node 0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initACPI: bus type pnp registeredpnp: PnP ACPI: found 12 devicesACPI: ACPI bus type pnp unregisteredPnPBIOS: DisabledPCI: Using ACPI for IRQ routingNetLabel: InitializingNetLabel: domain hash size = 128NetLabel: protocols = UNLABELED CIPSOv4NetLabel: unlabeled traffic allowed by defaulthpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0hpet0: 4 32-bit timers, 14318180 Hz_OSC request failsACPI: RTC can wake from S4Switched to high resolution mode on CPU 0Switched to high resolution mode on CPU 1system 00:01: iomem range 0xfec00000-0xfec00fff could not be reservedsystem 00:01: iomem range 0xfee00000-0xfee00fff could not be reservedsystem 00:08: ioport range 0x400-0x4cf has been reservedsystem 00:08: ioport range 0x4d0-0x4d1 has been reservedsystem 00:08: ioport range 0x4d6-0x4d6 has been reservedsystem 00:08: ioport range 0x680-0x6ff has been reservedsystem 00:08: ioport range 0x77a-0x77a has been reservedsystem 00:08: ioport range 0xc00-0xc01 has been reservedsystem 00:08: ioport range 0xc14-0xc14 has been reservedsystem 00:08: ioport range 0xc50-0xc52 has been reservedsystem 00:08: ioport range 0xc6c-0xc6c has been reservedsystem 00:08: ioport range 0xc6f-0xc6f has been reservedsystem 00:08: ioport range 0xcd0-0xcdb has been reservedsystem 00:09: iomem range 0xe0000-0xfffff could not be reservedsystem 00:09: iomem range 0xfff00000-0xffffffff could not be reservedpci 0000:00:02.0: PCI bridge, secondary bus 0000:01pci 0000:00:02.0: IO window: 0x7000-0x7fffpci 0000:00:02.0: MEM window: 0xd2400000-0xd24fffffpci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffffpci 0000:00:04.0: PCI bridge, secondary bus 0000:02pci 0000:00:04.0: IO window: 0x3000-0x6fffpci 0000:00:04.0: MEM window: 0xd1400000-0xd23fffffpci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffffpci 0000:00:05.0: PCI bridge, secondary bus 0000:08pci 0000:00:05.0: IO window: disabledpci 0000:00:05.0: MEM window: 0xd1300000-0xd13fffffpci 0000:00:05.0: PREFETCH window: disabledpci 0000:00:06.0: PCI bridge, secondary bus 0000:09pci 0000:00:06.0: IO window: disabledpci 0000:00:06.0: MEM window: 0xd1200000-0xd12fffffpci 0000:00:06.0: PREFETCH window: disabledpci 0000:00:07.0: PCI bridge, secondary bus 0000:0apci 0000:00:07.0: IO window: 0x2000-0x2fffpci 0000:00:07.0: MEM window: 0xd1100000-0xd11fffffpci 0000:00:07.0: PREFETCH window: 0x000000d1000000-0x000000d10fffffpci 0000:00:14.4: PCI bridge, secondary bus 0000:80pci 0000:00:14.4: IO window: 0x1000-0x1fffpci 0000:00:14.4: MEM window: disabledpci 0000:00:14.4: PREFETCH window: disabledpci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18pci 0000:00:02.0: setting latency timer to 64pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16pci 0000:00:04.0: setting latency timer to 64pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17pci 0000:00:05.0: setting latency timer to 64pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18pci 0000:00:06.0: setting latency timer to 64pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19pci 0000:00:07.0: setting latency timer to 64bus: 00 index 0 io port: [0, ffff]bus: 00 index 1 mmio: [0, ffffffffffffffff]bus: 01 index 0 io port: [7000, 7fff]bus: 01 index 1 mmio: [d2400000, d24fffff]bus: 01 index 2 mmio: [c0000000, cfffffff]bus: 01 index 3 mmio: [0, 0]bus: 02 index 0 io port: [3000, 6fff]bus: 02 index 1 mmio: [d1400000, d23fffff]bus: 02 index 2 mmio: [d0000000, d0ffffff]bus: 02 index 3 mmio: [0, 0]bus: 08 index 0 mmio: [0, 0]bus: 08 index 1 mmio: [d1300000, d13fffff]bus: 08 index 2 mmio: [0, 0]bus: 08 index 3 mmio: [0, 0]bus: 09 index 0 mmio: [0, 0]bus: 09 index 1 mmio: [d1200000, d12fffff]bus: 09 index 2 mmio: [0, 0]bus: 09 index 3 mmio: [0, 0]bus: 0a index 0 io port: [2000, 2fff]bus: 0a index 1 mmio: [d1100000, d11fffff]bus: 0a index 2 mmio: [d1000000, d10fffff]bus: 0a index 3 mmio: [0, 0]bus: 80 index 0 io port: [1000, 1fff]bus: 80 index 1 mmio: [0, 0]bus: 80 index 2 mmio: [0, 0]bus: 80 index 3 io port: [0, ffff]bus: 80 index 4 mmio: [0, ffffffffffffffff]NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 7, 524288 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredNET: Registered protocol family 1Simple Boot Flag at 0x44 set to 0x1apm: BIOS not found.audit: initializing netlink socket (disabled)type=2000 audit(1236530951.820:1): initializedhighmem bounce pool size: 64 pagesHugeTLB registered 2 MB page size, pre-allocated 0 pagesVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)msgmni has been set to 1699Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)io scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)pci 0000:00:14.2: MSI quirk detected; MSI enabledpci 0000:01:00.0: Boot video devicepcieport-driver 0000:00:02.0: setting latency timer to 64pcieport-driver 0000:00:02.0: found MSI capabilitypci_express 0000:00:02.0:pcie00: allocate port servicepcieport-driver 0000:00:04.0: setting latency timer to 64pcieport-driver 0000:00:04.0: found MSI capabilitypci_express 0000:00:04.0:pcie00: allocate port servicepci_express 0000:00:04.0:pcie02: allocate port servicepcieport-driver 0000:00:05.0: setting latency timer to 64pcieport-driver 0000:00:05.0: found MSI capabilitypci_express 0000:00:05.0:pcie00: allocate port servicepcieport-driver 0000:00:06.0: setting latency timer to 64pcieport-driver 0000:00:06.0: found MSI capabilitypci_express 0000:00:06.0:pcie00: allocate port servicepcieport-driver 0000:00:07.0: setting latency timer to 64pcieport-driver 0000:00:07.0: found MSI capabilitypci_express 0000:00:07.0:pcie00: allocate port servicevesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 1875k, total 16384kvesafb: mode is 800x600x16, linelength=1600, pages=16vesafb: protected mode interface info at c000:a084vesafb: pmi: set display start = c00ca126, set palette = c00ca1e4vesafb: scrolling: redrawvesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0Console: switching to colour frame buffer device 100x37fb0: VESA VGA frame buffer deviceisapnp: Scanning for PnP cards...Clocksource tsc unstable (delta = -97587604 ns)isapnp: No Plug & Play device foundSerial: 8250/16550 driver4 ports, IRQ sharing enabledbrd: module loadedPNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all miceinput: AT Translated Set 2 keyboard as /class/input/input0cpuidle: using governor laddercpuidle: using governor menuTCP cubic registeredUsing IPI No-Shortcut moderegistered taskstats version 1BIOS EDD facility v0.16 2004-Jun-25, 1 devices foundFreeing unused kernel memory: 376k freedusbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17ehci_hcd 0000:00:12.2: setting latency timer to 64ehci_hcd 0000:00:12.2: EHCI Host Controllerehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaroundehci_hcd 0000:00:12.2: debug port 1ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2508500ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 6 ports detectedusb usb1: New USB device found, idVendor=1d6b, idProduct=0002usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb1: Product: EHCI Host Controllerusb usb1: Manufacturer: Linux 2.6.27.14-server-1mnb ehci_hcdusb usb1: SerialNumber: 0000:00:12.2ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19ehci_hcd 0000:00:13.2: setting latency timer to 64ehci_hcd 0000:00:13.2: EHCI Host Controllerehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaroundehci_hcd 0000:00:13.2: debug port 1ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2508400ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 6 ports detectedusb 1-6: new high speed USB device using ehci_hcd and address 3usb 1-6: configuration #1 chosen from 1 choiceusb 1-6: New USB device found, idVendor=046d, idProduct=09b8usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0usb 1-6: Product: HP Webcam usb usb2: New USB device found, idVendor=1d6b, idProduct=0002usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb2: Product: EHCI Host Controllerusb usb2: Manufacturer: Linux 2.6.27.14-server-1mnb ehci_hcdusb usb2: SerialNumber: 0000:00:13.2ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driverohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16ohci_hcd 0000:00:12.0: setting latency timer to 64ohci_hcd 0000:00:12.0: OHCI Host Controllerohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2507000usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 3 ports detectedusb 2-5: new high speed USB device using ehci_hcd and address 2usb 2-5: configuration #1 chosen from 1 choiceusb 2-5: New USB device found, idVendor=07ca, idProduct=a309usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3usb 2-5: Product: A309usb 2-5: Manufacturer: AVerMediausb 2-5: SerialNumber: 301159900462000usb usb3: New USB device found, idVendor=1d6b, idProduct=0001usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb3: Product: OHCI Host Controllerusb usb3: Manufacturer: Linux 2.6.27.14-server-1mnb ohci_hcdusb usb3: SerialNumber: 0000:00:12.0ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16ohci_hcd 0000:00:12.1: setting latency timer to 64ohci_hcd 0000:00:12.1: OHCI Host Controllerohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2506000usb usb4: configuration #1 chosen from 1 choicehub 4-0:1.0: USB hub foundhub 4-0:1.0: 3 ports detectedSynaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000usb usb4: New USB device found, idVendor=1d6b, idProduct=0001usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb4: Product: OHCI Host Controllerusb usb4: Manufacturer: Linux 2.6.27.14-server-1mnb ohci_hcdusb usb4: SerialNumber: 0000:00:12.1ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18ohci_hcd 0000:00:13.0: setting latency timer to 64ohci_hcd 0000:00:13.0: OHCI Host Controllerohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2505000input: SynPS/2 Synaptics TouchPad as /class/input/input1usb usb5: configuration #1 chosen from 1 choicehub 5-0:1.0: USB hub foundhub 5-0:1.0: 3 ports detectedusb usb5: New USB device found, idVendor=1d6b, idProduct=0001usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb5: Product: OHCI Host Controllerusb usb5: Manufacturer: Linux 2.6.27.14-server-1mnb ohci_hcdusb usb5: SerialNumber: 0000:00:13.0ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18ohci_hcd 0000:00:13.1: setting latency timer to 64ohci_hcd 0000:00:13.1: OHCI Host Controllerohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2504000usb usb6: configuration #1 chosen from 1 choicehub 6-0:1.0: USB hub foundhub 6-0:1.0: 3 ports detectedusb usb6: New USB device found, idVendor=1d6b, idProduct=0001usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb6: Product: OHCI Host Controllerusb usb6: Manufacturer: Linux 2.6.27.14-server-1mnb ohci_hcdusb usb6: SerialNumber: 0000:00:13.1USB Universal Host Controller Interface driver v3.0usb 3-1: new low speed USB device using ohci_hcd and address 2SCSI subsystem initializedusb 3-1: configuration #1 chosen from 1 choiceusb 3-1: New USB device found, idVendor=15ca, idProduct=00c3usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0usb 3-1: Product: USB Optical MouseDriver 'sd' needs updating - please use bus_type methodsNo dock devices found.libata version 3.00 loaded.ahci 0000:00:11.0: version 3.0ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA modeahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio scsi0 : ahciscsi1 : ahciscsi2 : ahciscsi3 : ahciscsi4 : ahciscsi5 : ahciata1: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508100 irq 22ata2: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508180 irq 22ata3: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508200 irq 22ata4: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508280 irq 22ata5: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508300 irq 22ata6: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508380 irq 22ata1: softreset failed (device not ready)ata1: failed due to HW bug, retry pmp=0ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)ata1.00: configured for UDMA/100ata2: SATA link down (SStatus 0 SControl 300)ata3: SATA link down (SStatus 0 SControl 300)ata4: softreset failed (device not ready)ata4: failed due to HW bug, retry pmp=0ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T30L, GC04, max UDMA/100ata4.00: configured for UDMA/100ata5: SATA link down (SStatus 0 SControl 300)ata6: SATA link down (SStatus 0 SControl 300)scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAsd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >sd 0:0:0:0: [sda] Attached SCSI diskscsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T30L GC04 PQ: 0 ANSI: 5pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16pata_atiixp 0000:00:14.1: setting latency timer to 64scsi6 : pata_atiixpscsi7 : pata_atiixpata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8000 irq 14ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8008 irq 15kjournald starting. Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.TomoyoLinux Mandatory Access Control disabled by default.You need to install ccs-tools if you want to enable it.sd 0:0:0:0: Attached scsi generic sg0 type 0scsi 3:0:0:0: Attached scsi generic sg1 type 5ACPI: AC Adapter [ACAD] (on-line)input: Power Button (FF) as /class/input/input2ACPI: Power Button (FF) [PWRF]processor ACPI0007:00: registered as cooling_device0ACPI: Processor [CPU0] (supports 8 throttling states)processor ACPI0007:01: registered as cooling_device1input: Power Button (CM) as /class/input/input3ACPI: Power Button (CM) [PWRB]input: Lid Switch as /class/input/input4ACPI: Lid Switch [LID]sdhci: Secure Digital Host Controller Interface driversdhci: Copyright(c) Pierre Ossmansdhci-pci 0000:08:00.1: SDHCI controller found [197b:2382] (rev 0)sdhci-pci 0000:08:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17sdhci-pci 0000:08:00.1: setting latency timer to 64mmc0: SDHCI controller on PCI [0000:08:00.1] using DMAsdhci-pci 0000:08:00.2: SDHCI controller found [197b:2381] (rev 0)sdhci-pci 0000:08:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17sdhci-pci 0000:08:00.2: Refusing to bind to secondary interface.sdhci-pci 0000:08:00.2: PCI INT A disabledohci1394 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17ohci1394 0000:08:00.0: setting latency timer to 64thermal LNXTHERM:01: registered as thermal_zone0ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d1300000-d13007ff] Max Packet=[2048] IR/IT contexts=[4/4]Driver 'sr' needs updating - please use bus_type methodsLinux video capture interface: v2.00sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 3:0:0:0: Attached scsi CD-ROM sr0ACPI: Thermal Zone [TZ01] (65 C)ACPI: WMI: Mapper loadeduvcvideo: Found UVC 1.00 device HP Webcam (046d:09b8)input: HP Webcam as /class/input/input5usbcore: registered new interface driver uvcvideoUSB Video Class driver (v0.1.0)piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0acpi device:05: registered as cooling_device2input: Video Bus as /class/input/input6ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)proc_dir_entry 'video/VGA' already registeredPid: 1073, comm: modprobe Not tainted 2.6.27.14-server-1mnb #1 [<c0394e72>] ? printk+0x18/0x1e [<c01ef182>] proc_register+0x1a2/0x1d0 [<c01ef383>] proc_mkdir_mode+0x33/0x50 [<c01ef3af>] proc_mkdir+0xf/0x20 [<f8b964a6>] acpi_video_bus_add+0x1a2/0xb1c [video] [<c01facb5>] ? sysfs_do_create_link+0xa5/0x120 [<c0291163>] acpi_device_probe+0x42/0x84 [<c02c6c72>] driver_probe_device+0x82/0x1a0 [<c02c6e01>] __driver_attach+0x71/0x80 [<c02c658b>] bus_for_each_dev+0x4b/0x70 [<c02910bf>] ? acpi_device_remove+0x0/0x62 [<c02c6b09>] driver_attach+0x19/0x20 [<c02c6d90>] ? __driver_attach+0x0/0x80 [<c02c5f2f>] bus_add_driver+0x1af/0x230 [<c02910bf>] ? acpi_device_remove+0x0/0x62 [<c02c6fa9>] driver_register+0x69/0x140 [<f8afa000>] ? acpi_video_init+0x0/0x51 [video] [<c01ef383>] ? proc_mkdir_mode+0x33/0x50 [<f8afa000>] ? acpi_video_init+0x0/0x51 [video] [<c029143d>] acpi_bus_register_driver+0x3a/0x3d [<f8afa032>] acpi_video_init+0x32/0x51 [video] [<c010302a>] do_one_initcall+0x2a/0x150 [<c0161a16>] sys_init_module+0x96/0x1c0 [<c01acfcd>] ? sys_read+0x3d/0x70 [<c0109e03>] sysenter_do_call+0x12/0x2f =======================acpi device:0b: registered as cooling_device3input: Video Bus as /class/input/input7ACPI: Battery Slot [BAT0] (battery absent)ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)input: PC Speaker as /class/input/input8jmb38x_ms 0000:08:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17jmb38x_ms 0000:08:00.3: setting latency timer to 64r8169 Gigabit Ethernet driver 2.3LK-NAPI loadedr8169 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19r8169 0000:0a:00.0: setting latency timer to 64eth0: RTL8168c/8111c at 0xf8bae000, 00:1e:ec:9f:4d:d3, XID 3c2000c0 IRQ 218rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0rtc0: alarms up to one day, hpet irqsusbcore: registered new interface driver hiddevinput: USB Optical Mouse as /class/input/input9input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:12.0-1usbcore: registered new interface driver usbhidusbhid: v2.6:USB HID core driverath5k_pci 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18ath5k_pci 0000:09:00.0: setting latency timer to 64ath5k_pci 0000:09:00.0: registered as 'phy0'ath5k phy0: Support for RF2425 is under development.phy0: Selected rate control algorithm 'pid'ieee1394: Host added: ID:BUS[0-00:1023] GUID[883f0200b11140d7]ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16hda_intel: enable_msi set to 0x1 for device 103c:30fcHDA Intel 0000:00:14.2: setting latency timer to 64input: HDA Digital PCBeep as /class/input/input10HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19hda_intel: enable_msi set to 0x1 for device 103c:30fcHDA Intel 0000:01:00.1: setting latency timer to 64Non-volatile memory driver v1.2device-mapper: uevent: version 1.0.3device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.comEXT3 FS on sda5, internal journalkjournald starting. Commit interval 5 secondsEXT3 FS on sda7, internal journalEXT3-fs: mounted filesystem with ordered data mode.fuse init (API version 7.9)loop: module loadedAdding 5172888k swap on /dev/sda6. Priority:-1 extents:1 across:5172888kQEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice BellardKQEMU installed, max_locked_mem=2072764kB.NET: Registered protocol family 10lo: Disabled Privacy Extensionskvm: disabled by biosBluetooth: Core ver 2.13NET: Registered protocol family 31Bluetooth: HCI device and connection manager initializedBluetooth: HCI socket layer initializedBluetooth: L2CAP ver 2.11Bluetooth: L2CAP socket layer initializedBluetooth: BNEP (Ethernet Emulation) ver 1.3Bluetooth: BNEP filters: protocol multicastr8169: eth0: link upr8169: eth0: link upBluetooth: RFCOMM socket layer initializedBluetooth: RFCOMM TTY layer initializedBluetooth: RFCOMM ver 1.10Bridge firewalling registeredLinux agpgart interface v0.103fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.Symbol init_mm is marked as UNUSED, however this module is using it.This symbol will go away in the future.Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.[fglrx] Maximum main memory to use for locked dma buffers: 3884 MBytes.[fglrx] vendor: 1002 device: 95c4 count: 1[fglrx] ioport: bar 1, base 0x7000, size: 0x100pci 0000:01:00.0: power state changed by ACPI to D0pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18pci 0000:01:00.0: setting latency timer to 64[fglrx] Pat entry 2 is already configured[fglrx] PAT is enabled successfully![fglrx] module loaded - fglrx 8.52.3 [Aug 1 2008] with 1 minorsADDRCONF(NETDEV_UP): wlan0: link is not readyNET: Registered protocol family 17wlan0: authenticate with AP 00:17:33:58:3a:18wlan0: authenticatedwlan0: associate with AP 00:17:33:58:3a:18wlan0: RX AssocResp from 00:17:33:58:3a:18 (capab=0x401 status=0 aid=1)wlan0: associatedADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready[fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:ff7a000, size:80000 [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 hda-intel: Invalid position buffer, using LPIB read method instead.hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.ADDRCONF(NETDEV_UP): wlan0: link is not readyADDRCONF(NETDEV_UP): wlan0: link is not ready