root

Linux version 2.6.26.8-1.rt16.1mdv (mandrake@celeste.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 PREEMPT RT Thu Feb 19 17:59:28 EST 2009Command line: BOOT_IMAGE=2.6.26.8-1.rt16.1 root=UUID=5b519840-db8d-4c1a-b43c-25fdd78e5409 resume=UUID=4a7cf87e-1f4a-4a86-b0ac-a32d56ea7590BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000e4000000 - 00000000e6000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)Entering add_active_range(0, 0, 159) 0 entries of 256 usedEntering add_active_range(0, 256, 524272) 1 entries of 256 usedmax_pfn_mapped = 1048576x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106init_memory_mappingDMI 2.4 present.ACPI: RSDP 000F65C0, 0014 (r0 GBT   )ACPI: RSDT 7FFF3040, 003C (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)ACPI: FACP 7FFF30C0, 0074 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)ACPI: DSDT 7FFF3180, 4653 (r1 GBT    NVDAACPI     1000 MSFT  100000C)ACPI: FACS 7FFF0000, 0040ACPI: HPET 7FFF7940, 0038 (r1 GBT    NVDAACPI 42302E31 NVDA       98)ACPI: MCFG 7FFF79C0, 003C (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)ACPI: APIC 7FFF7840, 0098 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)ACPI: SSDT 7FFF7A40, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20040311)ACPI: SSDT 7FFF7ED0, 0275 (r1  PmRef    CpuPm     3000 INTL 20040311)Entering add_active_range(0, 0, 159) 0 entries of 256 usedEntering add_active_range(0, 256, 524272) 1 entries of 256 used  early res: 0 [0-fff] BIOS data page  early res: 1 [6000-7fff] TRAMPOLINE  early res: 2 [200000-678faf] TEXT DATA BSS  early res: 3 [37b4f000-37fef176] RAMDISK  early res: 4 [9f800-fffff] BIOS reserved  early res: 5 [8000-bfff] PGTABLE [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0Zone PFN ranges:  DMA             0 ->     4096  DMA32        4096 ->  1048576  Normal    1048576 ->  1048576Movable zone start PFN for each nodeearly_node_map[2] active PFN ranges    0:        0 ->      159    0:      256 ->   524272On node 0 totalpages: 524175  DMA zone: 56 pages used for memmap  DMA zone: 1249 pages reserved  DMA zone: 2694 pages, LIFO batch:0  DMA32 zone: 7112 pages used for memmap  DMA32 zone: 513064 pages, LIFO batch:31  Normal zone: 0 pages used for memmap  Movable zone: 0 pages used for memmapACPI: PM-Timer IO Port: 0x1008ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)WARNING: NR_CPUS limit of 1 reached. Processor ignored.ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.ACPI: IRQ14 used by override.ACPI: IRQ15 used by override.Setting APIC routing to flatACPI: HPET id: 0x10de8201 base: 0xfeff0000Using ACPI (MADT) for SMP configuration informationPM: Registered nosave memory: 000000000009f000 - 00000000000a0000PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000PM: Registered nosave memory: 00000000000f0000 - 0000000000100000Allocating PCI resources starting at 88000000 (gap: 80000000:64000000)Real-Time Preemption Support (C) 2004-2007 Ingo MolnarBuilt 1 zonelists in Zone order, mobility grouping on.  Total pages: 515758Kernel command line: BOOT_IMAGE=2.6.26.8-1.rt16.1 root=UUID=5b519840-db8d-4c1a-b43c-25fdd78e5409 resume=UUID=4a7cf87e-1f4a-4a86-b0ac-a32d56ea7590Initializing CPU#0Preemptible RCU implementation.PID hash table entries: 4096 (order: 12, 32768 bytes)TSC calibrated against PM_TIMERtime.c: Detected 2333.325 MHz processor.spurious 8259A interrupt: IRQ7.Console: colour VGA+ 80x25console [tty0] enabledDentry cache hash table entries: 262144 (order: 9, 2097152 bytes)Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)Checking aperture...Calgary: detecting Calgary via BIOS EBDA areaCalgary: Unable to locate Rio Grande table in EBDA - bailing!Memory: 2054624k/2097088k available (2295k kernel code, 41392k reserved, 1392k data, 296k init)CPA: page pool initialized 1 of 1 pages preallocatedhpet clockevent registeredCalibrating delay using timer specific routine.. 4670.55 BogoMIPS (lpj=9341100)Security Framework initializedCapability LSM initializedMount-cache hash table entries: 256Initializing cgroup subsys nsInitializing cgroup subsys cpuacctInitializing cgroup subsys devicesCPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 4096KCPU0: Thermal monitoring enabled (TM2)using mwait in idle threads.CPU: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0bACPI: Core revision 20080321Using local APIC timer interrupts.APIC timer calibration result 20833288Detected 20.833 MHz APIC timer.net_namespace: 1384 bytesBooting paravirtualized kernel on bare hardwareNET: Registered protocol family 16ACPI: bus type pci registeredPCI: MCFG configuration 0: base e4000000 segment 0 buses 0 - 31PCI: MCFG area at e4000000 reserved in E820PCI: Using MMCONFIG at e4000000 - e5ffffffPCI: Using configuration type 1 for base accessACPI: EC: Look up EC in DSDTACPI: Interpreter enabledACPI: (supports S0 S1 S4 S5)ACPI: Using IOAPIC for interrupt routingACPI: PCI Root Bridge [PCI0] (0000:00)PCI: Transparent bridge - 0000:00:10.0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initACPI: bus type pnp registeredpnp: PnP ACPI: found 12 devicesACPI: ACPI bus type pnp unregisteredPCI: Using ACPI for IRQ routingDMAR:parse DMAR table failure.PCI-GART: No AMD northbridge found.hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31hpet0: 3 32-bit timers, 25000000 HzACPI: RTC can wake from S4system 00:01: ioport range 0x1000-0x107f has been reservedsystem 00:01: ioport range 0x1080-0x10ff has been reservedsystem 00:01: ioport range 0x1400-0x147f has been reservedsystem 00:01: ioport range 0x1480-0x14ff has been reservedsystem 00:01: ioport range 0x1800-0x187f has been reservedsystem 00:01: ioport range 0x1880-0x18ff has been reservedsystem 00:02: ioport range 0x4d0-0x4d1 has been reservedsystem 00:02: ioport range 0x800-0x87f has been reservedsystem 00:02: ioport range 0x295-0x314 has been reservedsystem 00:02: ioport range 0x290-0x294 has been reservedsystem 00:02: ioport range 0x880-0x88f has been reservedsystem 00:0a: iomem range 0xe4000000-0xe5ffffff could not be reservedsystem 00:0b: iomem range 0xd0000-0xd3fff has been reservedsystem 00:0b: iomem range 0xf0000-0xf7fff could not be reservedsystem 00:0b: iomem range 0xf8000-0xfbfff could not be reservedsystem 00:0b: iomem range 0xfc000-0xfffff could not be reservedsystem 00:0b: iomem range 0x7fff0000-0x7fffffff could not be reservedsystem 00:0b: iomem range 0xffff0000-0xffffffff could not be reservedsystem 00:0b: iomem range 0x0-0x9ffff could not be reservedsystem 00:0b: iomem range 0x100000-0x7ffeffff could not be reservedsystem 00:0b: iomem range 0xfec00000-0xfec00fff could not be reservedsystem 00:0b: iomem range 0xfee00000-0xfee00fff could not be reservedPCI: Bridge: 0000:00:03.0  IO window: d000-dfff  MEM window: 0xe0000000-0xe3ffffff  PREFETCH window: 0x00000000d0000000-0x00000000dfffffffPCI: Bridge: 0000:00:10.0  IO window: disabled.  MEM window: 0xe6000000-0xe60fffff  PREFETCH window: disabled.PCI: Setting latency timer of device 0000:00:03.0 to 64PCI: Setting latency timer of device 0000:00:10.0 to 64NET: Registered protocol family 2IP route cache hash table entries: 65536 (order: 7, 524288 bytes)TCP established hash table entries: 262144 (order: 10, 4194304 bytes)TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)TCP: Hash tables configured (established 262144 bind 65536)TCP reno registeredNET: Registered protocol family 1checking if image is initramfs... it isFreeing initrd memory: 4736k freedaudit: initializing netlink socket (disabled)type=2000 audit(1236120272.800:1): initializedkrcupreemptd setsched 0  prio = 98Total HugeTLB memory allocated, 0VFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 512 (order 0, 4096 bytes)msgmni has been set to 4023Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)io scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)pci 0000:00:03.0: Disabling HT MSI mapping<6>pci 0000:00:09.0: Disabling HT MSI mapping<6>pci 0000:00:0e.0: Disabling HT MSI mapping<6>pci 0000:00:0f.0: Disabling HT MSI mapping<6>pci 0000:00:10.0: Disabling HT MSI mapping<6>pci 0000:00:10.1: Disabling HT MSI mapping<7>pci 0000:01:00.0: Boot video devicePCI: Setting latency timer of device 0000:00:03.0 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:03.0:pcie00]Allocate Port Service[0000:00:03.0:pcie03]hpet_resources: 0xfeff0000 is busyLinux agpgart interface v0.103Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550Abrd: module loadedPNP: No PS/2 controller found. Probing ports directly.serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all miceTCP bic registeredregistered taskstats version 1BIOS EDD facility v0.16 2004-Jun-25, 0 devices foundEDD information not available.Freeing unused kernel memory: 296k freedusbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbusbcore: registered new interface driver hiddevusbcore: registered new interface driver usbhidusbhid: v2.6:USB HID core driverACPI: PCI Interrupt Link [APCL] enabled at IRQ 23ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23PCI: Setting latency timer of device 0000:00:0b.1 to 64ehci_hcd 0000:00:0b.1: EHCI Host Controllerehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:0b.1: debug port 1PCI: cache line size of 32 is not supported by device 0000:00:0b.1ehci_hcd 0000:00:0b.1: irq 23, io mem 0xe6107000ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 8 ports detectedusb usb1: New USB device found, idVendor=1d6b, idProduct=0002usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb1: Product: EHCI Host Controllerusb usb1: Manufacturer: Linux 2.6.26.8-1.rt16.1mdv ehci_hcdusb usb1: SerialNumber: 0000:00:0b.1ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverACPI: PCI Interrupt Link [APCF] enabled at IRQ 22ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22PCI: Setting latency timer of device 0000:00:0b.0 to 64ohci_hcd 0000:00:0b.0: OHCI Host Controllerohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2ohci_hcd 0000:00:0b.0: irq 22, io mem 0xe6106000usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 8 ports detectedusb usb2: New USB device found, idVendor=1d6b, idProduct=0001usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb2: Product: OHCI Host Controllerusb usb2: Manufacturer: Linux 2.6.26.8-1.rt16.1mdv ohci_hcdusb usb2: SerialNumber: 0000:00:0b.0USB Universal Host Controller Interface driver v3.0SCSI subsystem initializedDriver 'sd' needs updating - please use bus_type methodsNo dock devices found.libata version 3.00 loaded.sata_nv 0000:00:0e.0: version 3.5ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21sata_nv 0000:00:0e.0: Using SWNCQ modePCI: Setting latency timer of device 0000:00:0e.0 to 64scsi0 : sata_nvscsi1 : sata_nvata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe600 irq 21ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe608 irq 21ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata1.00: HPA detected: current 976771055, native 976773168ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)ata1.00: configured for UDMA/133ata2: SATA link down (SStatus 0 SControl 300)isa bounce pool size: 16 pagesscsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAsd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9<6>usb 2-5: new low speed USB device using ohci_hcd and address 2 sda10 sda11 >sd 0:0:0:0: [sda] Attached SCSI diskACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20sata_nv 0000:00:0f.0: Using SWNCQ modePCI: Setting latency timer of device 0000:00:0f.0 to 64scsi2 : sata_nvscsi3 : sata_nvata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xeb00 irq 20ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xeb08 irq 20usb 2-5: configuration #1 chosen from 1 choiceata3: SATA link down (SStatus 0 SControl 300)input: Razer Razer 1600dpi Mouse as /class/input/input0input,hidraw0: USB HID v1.10 Mouse [Razer Razer 1600dpi Mouse] on usb-0000:00:0b.0-5usb 2-5: New USB device found, idVendor=1532, idProduct=0001usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0usb 2-5: Product: Razer 1600dpi Mouseusb 2-5: Manufacturer: Razerata4: SATA link down (SStatus 0 SControl 300)usb 2-6: new low speed USB device using ohci_hcd and address 3pata_amd 0000:00:0d.0: version 0.3.10PCI: Setting latency timer of device 0000:00:0d.0 to 64scsi4 : pata_amdscsi5 : pata_amdata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15ata5.01: failed to IDENTIFY (device reports invalid type, err_mask=0x0)ata5: failed to recover some devices, retrying in 5 secsusb 2-6: configuration #1 chosen from 1 choiceinput: USB-compliant keyboard as /class/input/input1input,hidraw1: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:0b.0-6input: USB-compliant keyboard as /class/input/input2input,hiddev0,hidraw2: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:0b.0-6usb 2-6: New USB device found, idVendor=062a, idProduct=0201usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0usb 2-6: Product: USB-compliant keyboardusb 2-7: new full speed USB device using ohci_hcd and address 4usb 2-7: configuration #1 chosen from 1 choiceusb 2-7: New USB device found, idVendor=04a9, idProduct=220dusb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0usb 2-7: Product: CanoScanusb 2-7: Manufacturer: Canonusb 2-8: new full speed USB device using ohci_hcd and address 5usb 2-8: configuration #1 chosen from 1 choiceusb 2-8: New USB device found, idVendor=0582, idProduct=00a3usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0usb 2-8: Product: UA-4FXusb 2-8: Manufacturer: EDIROLata5.01: failed to IDENTIFY (device reports invalid type, err_mask=0x0)ata5: failed to recover some devices, retrying in 5 secsata5.00: ATAPI: PHILIPS PBDV1640P, B3.4, max UDMA/33ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)ata5.00: configured for UDMA/33ata6: port disabled. ignoring.scsi 4:0:0:0: CD-ROM            PHILIPS  PBDV1640P        B3.4 PQ: 0 ANSI: 5kjournald starting.  Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.ACPI: ACPI0007:00 is registered as cooling_device0input: Power Button (FF) as /class/input/input3ACPI: Power Button (FF) [PWRF]input: Power Button (CM) as /class/input/input4ACPI: Power Button (CM) [PWRB]i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80sd 0:0:0:0: Attached scsi generic sg0 type 0scsi 4:0:0:0: Attached scsi generic sg1 type 5Driver 'sr' needs updating - please use bus_type methodssr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 4:0:0:0: Attached scsi CD-ROM sr0forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23PCI: Setting latency timer of device 0000:00:14.0 to 64input: PC Speaker as /class/input/input5Error: Driver 'pcspkr' is already registered, aborting...rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0rtc0: alarms up to one year, y3kIT8718 SuperIO detected.parport_pc 00:09: reported by Plug and Play ACPIparport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:57:85:56forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22PCI: Setting latency timer of device 0000:00:10.1 to 64ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17phy0: Selected rate control algorithm 'pid'ppdev: user-space parallel port driverRegistered led device: rt61pci-phy0:radioRegistered led device: rt61pci-phy0:assocdevice-mapper: uevent: version 1.0.3device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.comEXT3 FS on sda5, internal journalkjournald starting.  Commit interval 5 secondsEXT3 FS on sda1, internal journalEXT3-fs: mounted filesystem with ordered data mode.kjournald starting.  Commit interval 5 secondsEXT3 FS on sda11, internal journalEXT3-fs: mounted filesystem with ordered data mode.kjournald starting.  Commit interval 5 secondsEXT3 FS on sda10, internal journalEXT3-fs: mounted filesystem with ordered data mode.kjournald starting.  Commit interval 5 secondsEXT3 FS on sda9, internal journalEXT3-fs: mounted filesystem with ordered data mode.kjournald starting.  Commit interval 5 secondsEXT3 FS on sda7, internal journalEXT3-fs: mounted filesystem with ordered data mode.kjournald starting.  Commit interval 5 secondsEXT3 FS on sda8, internal journalEXT3-fs: mounted filesystem with ordered data mode.loop: module loadedAdding 4088500k swap on /dev/sda6.  Priority:-1 extents:1 across:4088500kNET: Registered protocol family 10lo: Disabled Privacy ExtensionsBluetooth: Core ver 2.11NET: Registered protocol family 31Bluetooth: HCI device and connection manager initializedBluetooth: HCI socket layer initializedBluetooth: L2CAP ver 2.9Bluetooth: L2CAP socket layer initializedBluetooth: RFCOMM socket layer initializedBluetooth: RFCOMM TTY layer initializedBluetooth: RFCOMM ver 1.8Bluetooth: BNEP (Ethernet Emulation) ver 1.2Bluetooth: BNEP filters: protocol multicastBridge firewalling registeredpan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.firmware: requesting rt2561.binADDRCONF(NETDEV_UP): wlan0: link is not readyNET: Registered protocol family 17tun: Universal TUN/TAP device driver, 1.6tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>NET: Registered protocol family 15ip_tables: (C) 2000-2006 Netfilter Core TeamNetfilter messages via NETLINK v0.30.nf_conntrack version 0.5.0 (16384 buckets, 65536 max)ctnetlink v0.93: registering with nfnetlink.ClusterIP Version 0.8 loaded successfullyip6_tables: (C) 2000-2006 Netfilter Core Teameth0: no IPv6 routers present