288150] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.288160] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.288411] mice: PS/2 mouse device common for all mice
[ 8.315859] input: AT Translated Set 2 keyboard as /class/input/input0
[ 8.326430] TCP cubic registered
[ 8.326461] NET: Registered protocol family 1
[ 8.326471] NET: Registered protocol family 17
[ 8.326483] Using IPI Shortcut mode
[ 8.326804] Freeing unused kernel memory: 164k freed
[ 8.402014] kjournald starting. Commit interval 5 seconds
[ 8.403051] EXT3 FS on sda2, internal journal
[ 8.403061] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.646870] Generic RTC Driver v1.07
[ 8.647002] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.427980] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.460607] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04753/0x200000
[ 9.554080] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[ 14.013380] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.179858] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.272833] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.282550] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.297126] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.319287] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.327360] ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 14.327405] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 14.900116] jack present = 0 0
[ 14.952343] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.968279] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.973231] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.986230] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.998745] ACPI: AC Adapter [AC0] (on-line)
[ 14.998842] Doing delayed copyup of a read-write file on a read-only branch.
[ 15.371588] ACPI: Battery Slot [BAT0] (battery present)
[ 15.371701] Doing delayed copyup of a read-write file on a read-only branch.
[ 15.386915] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 15.386931] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 15.387060] Doing delayed copyup of a read-write file on a read-only branch.
[ 15.400497] input: Power Button (FF) as /class/input/input2
[ 15.400963] ACPI: Power Button (FF) [PWRF]
[ 15.401782] input: Lid Switch as /class/input/input3
[ 15.402212] ACPI: Lid Switch [LID]
[ 15.402748] input: Sleep Button (CM) as /class/input/input4
[ 15.402805] ACPI: Sleep Button (CM) [SLPB]
[ 15.402909] input: Power Button (CM) as /class/input/input5
[ 15.402945] ACPI: Power Button (CM) [PWRB]
[ 15.403026] Doing delayed copyup of a read-write file on a read-only branch.
[ 15.422549] eeepc_hotk: module license 'unspecified' taints kernel.
[ 15.423171] Asus EEEPC HOTKEY
[ 15.423587] [eeepc hotk] Hotkey init flags 0x41.
[ 15.425154] [eeepc hotk] Get control methods supported : 0x101711
[ 15.425244] Doing delayed copyup of a read-write file on a read-only branch.
[ 15.603240] fuse init (API version 7.8)
[ 15.604810] Doing delayed copyup of a read-write file on a read-only branch.
[ 15.630233] usbcore: registered new interface driver usbfs
[ 15.630281] usbcore: registered new interface driver hub
[ 15.630324] usbcore: registered new device driver usb
[ 15.630388] Doing delayed copyup of a read-write file on a read-only branch.
[ 15.635654] usbcore: registered new interface driver usbhid
[ 15.635664] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 15.635697] Doing delayed copyup of a read-write file on a read-only branch.
[ 15.751483] USB Universal Host Controller Interface driver v3.0
[ 15.753910] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
[ 15.753920] PCI: setting IRQ 3 as level-triggered
[ 15.753928] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 3 (level, low) -> IRQ 3
[ 15.753951] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 15.753960] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 15.755165] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 15.755216] uhci_hcd 0000:00:1d.0: irq 3, io base 0x0000e400
[ 15.756618] usb usb1: configuration #1 chosen from 1 choice
[ 15.757007] hub 1-0:1.0: USB hub found
[ 15.757029] hub 1-0:1.0: 2 ports detected
[ 8.590000] Time: acpi_pm clocksource has been installed.
[ 8.620000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[ 8.620000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 8.620000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.620000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 8.620000] uhci_hcd 0000:00:1d.1: irq 7, io base 0x0000e480
[ 8.620000] usb usb2: configuration #1 chosen from 1 choice
[ 8.620000] hub 2-0:1.0: USB hub found
[ 8.620000] hub 2-0:1.0: 2 ports detected
[ 8.730000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 8.730000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 8.730000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.730000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 8.730000] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000e800
[ 8.730000] usb usb3: configuration #1 chosen from 1 choice
[ 8.730000] hub 3-0:1.0: USB hub found
[ 8.730000] hub 3-0:1.0: 2 ports detected
[ 8.840000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 8.840000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 8.840000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 8.840000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 8.840000] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000e880
[ 8.840000] usb usb4: configuration #1 chosen from 1 choice
[ 8.840000] hub 4-0:1.0: USB hub found
[ 8.840000] hub 4-0:1.0: 2 ports detected
[ 8.880000] Clocksource tsc unstable (delta = -65941973 ns)
[ 8.950000] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.100000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 3 (level, low) -> IRQ 3
[ 9.100000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 9.100000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 9.100000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 9.100000] ehci_hcd 0000:00:1d.7: debug port 1
[ 9.100000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 9.100000] ehci_hcd 0000:00:1d.7: irq 3, io mem 0xf7eb7c00
[ 9.100000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 9.110000] usb usb5: configuration #1 chosen from 1 choice
[ 9.110000] hub 5-0:1.0: USB hub found
[ 9.110000] hub 5-0:1.0: 8 ports detected
[ 9.120000] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 9.220000] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.250000] Atheros(R) L2 Ethernet Network Driver - version 1.0.40.4
[ 9.250000] Copyright (c) 2007 Atheros Corporation.
[ 9.250000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 9.250000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 9.500000] usb 5-5: new high speed USB device using ehci_hcd and address 2
[ 9.530000] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.540000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.540000] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.540000] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.560000] pciehp: HPC vendor_id 8086 device_id 2660 ss_vid 0 ss_did 0
[ 9.560000] Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
[ 9.560000] pciehp: HPC vendor_id 8086 device_id 2662 ss_vid 0 ss_did 0
[ 9.560000] Load service driver hpdriver on pcie device 0000:00:1c.1:pcie02
[ 9.560000] pciehp: HPC vendor_id 8086 device_id 2664 ss_vid 0 ss_did 0
[ 9.560000] Load service driver hpdriver on pcie device 0000:00:1c.2:pcie02
[ 9.560000] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 9.600000] ath_hal: 0.9.17.1 (AR5212, RF5111, RF5112, RF2413, RF5413)
[ 9.600000] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.600000] ath_dfs: Version 2.0.0
[ 9.600000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
[ 9.600000] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.620000] wlan: 0.8.4.2 (Atheros/multi-bss)
[ 9.620000] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.630000] ath_rate_atheros: no version for "ath_hal_getuptime" found: kernel tainted.
[ 9.630000] ath_rate_atheros: Version 2.0.1
[ 9.630000] Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
[ 9.630000] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.640000] ath_pci: 0.9.4.5 (Atheros/multi-bss)
[ 9.640000] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.650000] usb 5-5: configuration #1 chosen from 1 choice
[ 9.730000] usbcore: registered new interface driver libusual
[ 9.740000] Doing delayed copyup of a read-write file on a read-only branch.
[ 9.740000] Initializing USB Mass Storage driver...
[ 9.740000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 9.740000] usb-storage: device found at 2
[ 9.740000] usb-storage: waiting for device to settle before scanning
[ 9.740000] usbcore: registered new interface driver usb-storage
[ 9.740000] USB Mass Storage support registered.
[ 9.740000] Doing delayed copyup of a read-write file on a read-only branch.
[ 10.680000] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.400000] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.410000] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.420000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 14.420000] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.430000] Doing delayed copyup of a read-write file on a read-only branch.
[ 14.740000] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 14.740000] sd 2:0:0:0: Attached scsi removable disk sdb
[ 14.750000] usb-storage: device scan complete
[ 15.090000] Doing delayed copyup of a read-write file on a read-only branch.
[ 15.140000] Doing delayed copyup of a read-write file on a read-only branch.
[ 15.150000] Doing delayed copyup of a read-write file on a read-only branch.
[ 15.150000] Doing delayed copyup of a read-write file on a read-only branch.
[ 54.790000] Doing delayed copyup of a read-write file on a read-only branch.
[ 63.450000] usb 5-8: new high speed USB device using ehci_hcd and address 3
[ 63.640000] usb 5-8: configuration #1 chosen from 1 choice
[ 63.720000] Doing delayed copyup of a read-write file on a read-only branch.
[ 63.730000] Doing delayed copyup of a read-write file on a read-only branch.
[ 63.730000] Linux video capture interface: v2.00
[ 63.730000] Doing delayed copyup of a read-write file on a read-only branch.
[ 63.730000] Doing delayed copyup of a read-write file on a read-only branch.
[ 63.740000] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761)
[ 64.040000] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -110 (exp. 26).
[ 64.110000] usbcore: registered new interface driver uvcvideo
[ 64.110000] USB Video Class driver (v0.1.0)
[ 64.110000] Doing delayed copyup of a read-write file on a read-only branch.
[ 65.750000] usb 5-8: USB disconnect, address 3
[ 75.350000] error creating directory tree for rename, bindex = 1, err = -30
[ 75.350000] error creating directory tree for rename, bindex = 1, err = -30
[ 97.860000] error creating directory tree for rename, bindex = 1, err = -30
[ 137.900000] ATL2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 343.420000] unhashed dentry being revalidated: passwords.dat
[ 344.750000] Doing delayed copyup of a read-write file on a read-only branch.
[ 362.350000] unhashed dentry being revalidated: status
[ 365.790000] Doing delayed copyup of a read-write file on a read-only branch.
[ 365.840000] Doing delayed copyup of a read-write file on a read-only branch.
[ 365.850000] unhashed dentry being revalidated: group
[ 365.870000] Doing delayed copyup of a read-write file on a read-only branch.
[ 366.000000] unhashed dentry being revalidated: passwd
[ 366.300000] unhashed dentry being revalidated: group
[ 373.610000] Doing delayed copyup of a read-write file on a read-only branch.
[ 373.620000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 373.620000] Doing delayed copyup of a read-write file on a read-only branch.
[ 374.030000] unhashed dentry being revalidated: passwords.dat
[ 388.960000] unhashed dentry being revalidated: diversions
[ 389.410000] unhashed dentry being revalidated: status
[ 494.390000] usb 5-3: new high speed USB device using ehci_hcd and address 4
[ 494.550000] usb 5-3: configuration #1 chosen from 1 choice
[ 494.550000] scsi3 : SCSI emulation for USB Mass Storage devices
[ 494.550000] usb 5-3: USB disconnect, address 4
[ 494.550000] usb-storage: device found at -1
[ 494.550000] usb-storage: waiting for device to settle before scanning
[ 494.720000] usbcore: registered new interface driver usbserial
[ 494.720000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 494.720000] Doing delayed copyup of a read-write file on a read-only branch.
[ 494.730000] drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
[ 494.730000] usbcore: registered new interface driver option
[ 494.730000] drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
[ 494.730000] Doing delayed copyup of a read-write file on a read-only branch.
[ 501.180000] usb 5-3: new high speed USB device using ehci_hcd and address 5
[ 501.340000] usb 5-3: configuration #1 chosen from 1 choice
[ 501.340000] usb-storage: probe of 5-3:1.0 failed with error -5
[ 501.340000] option 5-3:1.0: GSM modem (1-port) converter detected
[ 501.340000] usb 5-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 501.340000] usb-storage: probe of 5-3:1.1 failed with error -5
[ 501.340000] option 5-3:1.1: GSM modem (1-port) converter detected
[ 501.340000] usb 5-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 511.340000] scsi6 : SCSI emulation for USB Mass Storage devices
[ 511.340000] usb-storage: device found at 5
[ 511.340000] usb-storage: waiting for device to settle before scanning
[ 517.340000] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 521.340000] scsi7 : SCSI emulation for USB Mass Storage devices
[ 521.340000] usb-storage: device found at 5
[ 521.340000] usb-storage: waiting for device to settle before scanning
[ 521.470000] usb 5-3: reset high speed USB device using ehci_hcd and address 5
[ 521.750000] usb 5-3: reset high speed USB device using ehci_hcd and address 5
[ 522.030000] usb 5-3: reset high speed USB device using ehci_hcd and address 5
[ 522.340000] usb 5-3: reset high speed USB device using ehci_hcd and address 5