rendered paste bodyBIOS EBDA/lowmem at: 0009fc00/0009fc00Linux version 2.6.28.4-desktop-1mnb (herton@build1.conectiva) (gcc version 4.3.2 (GCC) ) #1 SMP Mon Feb 9 08:13:12 EST 2009KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMCBIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfd70000 (usable) BIOS-e820: 00000000bfd70000 - 00000000bfdbf000 (reserved) BIOS-e820: 00000000bfdbf000 - 00000000bfe58000 (usable) BIOS-e820: 00000000bfe58000 - 00000000bfebf000 (ACPI NVS) BIOS-e820: 00000000bfebf000 - 00000000bfeed000 (usable) BIOS-e820: 00000000bfeed000 - 00000000bfeff000 (ACPI data) BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable) BIOS-e820: 00000000e0000000 - 00000000e1000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable)DMI 2.4 present.last_pfn = 0xbff00 max_arch_pfn = 0x100000x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106kernel direct mapping tables up to 377fe000 @ 7000-d000RAMDISK: 37b7f000 - 37fefcc0Allocated new RAMDISK: 00634000 - 00aa4cc0Move RAMDISK from 0000000037b7f000 - 0000000037fefcbf to 00634000 - 00aa4cbfACPI: RSDP 000FE020, 0024 (r2 HP )ACPI: XSDT BFEFE120, 005C (r1 HPQOEM SLIC-MPC 1 1000013)ACPI: FACP BFEFD000, 00F4 (r4 HP TRINITY 3 LOHR 1000013)ACPI: DSDT BFEF0000, 9F33 (r1 HP TRINITY F0000000 LOHR 1000013)ACPI: FACS BFE61000, 0040ACPI: HPET BFEFC000, 0038 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013)ACPI: APIC BFEFB000, 0084 (r2 HPQOEM SLIC-MPC 1 LOHR 1000013)ACPI: MCFG BFEFA000, 003C (r1 HPQOEM SLIC-MPC 1 LOHR 1000013)ACPI: BOOT BFEEF000, 0028 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013)ACPI: SLIC BFEEE000, 0176 (r1 HPQOEM SLIC-MPC 1 LOHR 1000013)ACPI: SSDT BFEED000, 0386 (r1 AMD PowerNow 1 AMD 1)ACPI: Local APIC address 0xfee000002183MB HIGHMEM available.887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00009000 - 0000ff00(9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000630a20] TEXT DATA BSS ==> [0000100000 - 0000630a20] #4 [0000631000 - 0000634000] INIT_PG_TABLE ==> [0000631000 - 0000634000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [0000634000 - 0000aa4cc0] NEW RAMDISK ==> [0000634000 - 0000aa4cc0] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000bff00Movable zone start PFN for each nodeearly_node_map[5] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bfd70 0: 0x000bfdbf -> 0x000bfe58 0: 0x000bfebf -> 0x000bfeed 0: 0x000bfeff -> 0x000bff00On node 0 totalpages: 785879free_area_init_node: node 0, pgdat c04dc880, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 4367 pages used for memmap HighMem zone: 554283 pages, LIFO batch:31 Movable zone: 0 pages used for memmapACPI: PM-Timer IO Port: 0x408ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode: Flat. Using 1 I/O APICsACPI: HPET id: 0x1002a201 base: 0xfed00000Using ACPI (MADT) for SMP configuration informationSMP: Allowing 4 CPUs, 2 hotplug CPUsPM: Registered nosave memory: 000000000009f000 - 00000000000a0000PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000PM: Registered nosave memory: 00000000000e0000 - 0000000000100000Allocating PCI resources starting at c0000000 (gap: bff00000:20100000)PERCPU: Allocating 40960 bytes of per cpu dataNR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779736Kernel command line: BOOT_IMAGE=linux root=UUID=d70b76ce-a85c-41cf-9cd4-4a3140bb15ab resume=UUID=ca2c626e-a496-11dd-ad15-001eec9f4dd3Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0PID hash table entries: 4096 (order: 12, 16384 bytes)Fast TSC calibration using PITDetected 2099.893 MHz processor.Console: colour VGA+ 80x25console [tty0] enabledDentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 3107140k/3144704k available (2684k kernel code, 35504k reserved, 1499k data, 420k init, 2234600k highmem)virtual kernel memory layout: fixmap : 0xffe18000 - 0xfffff000 (1948 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc051e000 - 0xc0587000 ( 420 kB) .data : 0xc039f311 - 0xc05160dc (1499 kB) .text : 0xc0100000 - 0xc039f311 (2684 kB)Checking if this processor honours the WP bit even in supervisor mode...Ok.SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1hpet clockevent registeredHPET: 4 timers in total, 1 timers will be used for per-cpu timerCalibrating delay loop (skipped), value calculated using timer frequency.. 4199.78 BogoMIPS (lpj=2099893)Security Framework initializedMount-cache hash table entries: 512CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)CPU: L2 Cache: 1024K (64 bytes/line)CPU: Physical Processor ID: 0CPU: Processor Core ID: 0Intel machine check architecture supported.Intel machine check reporting enabled on CPU#0.using C1E aware idle routineChecking 'hlt' instruction... OK.Early unpacking initramfs... doneFreeing initrd memory: 4547k freedACPI: Core revision 20080926ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found...TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1CPU0: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 stepping 01Booting processor 1 APIC 0x1 ip 0x6000Initializing CPU#1Calibrating delay using timer specific routine.. 4189.87 BogoMIPS (lpj=2094935)CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)CPU: L2 Cache: 1024K (64 bytes/line)CPU: Physical Processor ID: 0CPU: Processor Core ID: 1Intel machine check architecture supported.Intel machine check reporting enabled on CPU#1.x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106CPU1: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 stepping 01checking TSC synchronization [CPU#0 -> CPU#1]:Measured 203242470 cycles TSC warp between CPUs, turning off TSC clock.Marking TSC unstable due to check_tsc_sync_source failedBrought up 2 CPUsTotal of 2 processors activated (8389.65 BogoMIPS).CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0net_namespace: 776 bytesBooting paravirtualized kernel on bare hardwareNET: Registered protocol family 16ACPI: bus type pci registeredPCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 15PCI: MCFG area at e0000000 reserved in E820PCI: Using MMCONFIG for extended config spacePCI: Using configuration type 1 for base accessACPI: EC: Look up EC in DSDTACPI: BIOS _OSI(Linux) query ignoredACPI: EC: non-query interrupt received, switching to interrupt modeACPI: Interpreter enabledACPI: (supports S0 S1 S3 S4 S5)ACPI: Using IOAPIC for interrupt routingACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62ACPI: EC: driver started in interrupt modeACPI: No dock devices found.ACPI: PCI Root Bridge [PCI0] (0000:00)pci 0000:00:02.0: PME# supported from D0 D3hot D3coldpci 0000:00:02.0: PME# disabledpci 0000:00:04.0: PME# supported from D0 D3hot D3coldpci 0000:00:04.0: PME# disabledpci 0000:00:05.0: PME# supported from D0 D3hot D3coldpci 0000:00:05.0: PME# disabledpci 0000:00:06.0: PME# supported from D0 D3hot D3coldpci 0000:00:06.0: PME# disabledpci 0000:00:07.0: PME# supported from D0 D3hot D3coldpci 0000:00:07.0: PME# disabledpci 0000:00:11.0: reg 10 io port: [0x8038-0x803f]pci 0000:00:11.0: reg 14 io port: [0x804c-0x804f]pci 0000:00:11.0: reg 18 io port: [0x8030-0x8037]pci 0000:00:11.0: reg 1c io port: [0x8048-0x804b]pci 0000:00:11.0: reg 20 io port: [0x8010-0x801f]pci 0000:00:11.0: reg 24 32bit mmio: [0xd2508000-0xd25083ff]pci 0000:00:12.0: reg 10 32bit mmio: [0xd2507000-0xd2507fff]pci 0000:00:12.1: reg 10 32bit mmio: [0xd2506000-0xd2506fff]pci 0000:00:12.2: reg 10 32bit mmio: [0xd2508500-0xd25085ff]pci 0000:00:12.2: supports D1 D2pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hotpci 0000:00:12.2: PME# disabledpci 0000:00:13.0: reg 10 32bit mmio: [0xd2505000-0xd2505fff]pci 0000:00:13.1: reg 10 32bit mmio: [0xd2504000-0xd2504fff]pci 0000:00:13.2: reg 10 32bit mmio: [0xd2508400-0xd25084ff]pci 0000:00:13.2: supports D1 D2pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hotpci 0000:00:13.2: PME# disabledpci 0000:00:14.1: reg 10 io port: [0x00-0x07]pci 0000:00:14.1: reg 14 io port: [0x00-0x03]pci 0000:00:14.1: reg 18 io port: [0x00-0x07]pci 0000:00:14.1: reg 1c io port: [0x00-0x03]pci 0000:00:14.1: reg 20 io port: [0x8000-0x800f]pci 0000:00:14.2: reg 10 64bit mmio: [0xd2500000-0xd2503fff]pci 0000:00:14.2: PME# supported from D0 D3hot D3coldpci 0000:00:14.2: PME# disabledpci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]pci 0000:01:00.0: reg 14 io port: [0x7000-0x70ff]pci 0000:01:00.0: reg 18 32bit mmio: [0xd2400000-0xd240ffff]pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]pci 0000:01:00.0: supports D1 D2pci 0000:01:00.1: reg 10 32bit mmio: [0xd2410000-0xd2413fff]pci 0000:01:00.1: supports D1 D2pci 0000:00:02.0: bridge io port: [0x7000-0x7fff]pci 0000:00:02.0: bridge 32bit mmio: [0xd2400000-0xd24fffff]pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]pci 0000:00:04.0: bridge io port: [0x3000-0x6fff]pci 0000:00:04.0: bridge 32bit mmio: [0xd1400000-0xd23fffff]pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xd0ffffff]pci 0000:08:00.0: reg 10 32bit mmio: [0xd1300000-0xd13007ff]pci 0000:08:00.0: reg 14 32bit mmio: [0xd1300d00-0xd1300d7f]pci 0000:08:00.0: reg 20 32bit mmio: [0xd1300c80-0xd1300cff]pci 0000:08:00.0: reg 24 32bit mmio: [0xd1300c00-0xd1300c7f]pci 0000:08:00.1: reg 10 32bit mmio: [0xd1300b00-0xd1300bff]pci 0000:08:00.2: reg 10 32bit mmio: [0xd1300a00-0xd1300aff]pci 0000:08:00.3: reg 10 32bit mmio: [0xd1300900-0xd13009ff]pci 0000:08:00.4: reg 10 32bit mmio: [0xd1300800-0xd13008ff]pci 0000:00:05.0: bridge 32bit mmio: [0xd1300000-0xd13fffff]pci 0000:09:00.0: reg 10 64bit mmio: [0xd1200000-0xd120ffff]pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'pci 0000:00:06.0: bridge 32bit mmio: [0xd1200000-0xd12fffff]pci 0000:0a:00.0: reg 10 io port: [0x2000-0x20ff]pci 0000:0a:00.0: reg 18 64bit mmio: [0xd1100000-0xd1100fff]pci 0000:0a:00.0: reg 20 64bit mmio: [0xd1000000-0xd100ffff]pci 0000:0a:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]pci 0000:0a:00.0: supports D1 D2pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3coldpci 0000:0a:00.0: PME# disabledpci 0000:00:07.0: bridge io port: [0x2000-0x2fff]pci 0000:00:07.0: bridge 32bit mmio: [0xd1100000-0xd11fffff]pci 0000:00:07.0: bridge 64bit mmio pref: [0xd1000000-0xd10fffff]pci 0000:00:14.4: transparent bridgepci 0000:00:14.4: bridge io port: [0x1000-0x1fff]bus 00 -> node 0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.PCI: Using ACPI for IRQ routingNetLabel: InitializingNetLabel: domain hash size = 128NetLabel: protocols = UNLABELED CIPSOv4NetLabel: unlabeled traffic allowed by defaulthpet0: at MMIO 0xfed00000, IRQs 2, 8, 1279, 0hpet0: 4 comparators, 32-bit 14.318180 MHz counterhpet: hpet2 irq 1279 for MSI_OSC request failsSwitched to high resolution mode on CPU 0Switched to high resolution mode on CPU 1pnp: PnP ACPI initACPI: bus type pnp registeredpnp: PnP ACPI: found 12 devicesACPI: ACPI bus type pnp unregisteredPnPBIOS: Disabledsystem 00:01: iomem range 0xfec00000-0xfec00fff has been reservedsystem 00:01: iomem range 0xfee00000-0xfee00fff has been reservedsystem 00:08: ioport range 0x400-0x4cf has been reservedsystem 00:08: ioport range 0x4d0-0x4d1 has been reservedsystem 00:08: ioport range 0x4d6-0x4d6 has been reservedsystem 00:08: ioport range 0x680-0x6ff has been reservedsystem 00:08: ioport range 0x77a-0x77a has been reservedsystem 00:08: ioport range 0xc00-0xc01 has been reservedsystem 00:08: ioport range 0xc14-0xc14 has been reservedsystem 00:08: ioport range 0xc50-0xc52 has been reservedsystem 00:08: ioport range 0xc6c-0xc6c has been reservedsystem 00:08: ioport range 0xc6f-0xc6f has been reservedsystem 00:08: ioport range 0xcd0-0xcdb has been reservedsystem 00:09: iomem range 0xe0000-0xfffff could not be reservedsystem 00:09: iomem range 0xfff00000-0xffffffff has been reservedpci 0000:00:02.0: PCI bridge, secondary bus 0000:01pci 0000:00:02.0: IO window: 0x7000-0x7fffpci 0000:00:02.0: MEM window: 0xd2400000-0xd24fffffpci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffffpci 0000:00:04.0: PCI bridge, secondary bus 0000:02pci 0000:00:04.0: IO window: 0x3000-0x6fffpci 0000:00:04.0: MEM window: 0xd1400000-0xd23fffffpci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffffpci 0000:00:05.0: PCI bridge, secondary bus 0000:08pci 0000:00:05.0: IO window: disabledpci 0000:00:05.0: MEM window: 0xd1300000-0xd13fffffpci 0000:00:05.0: PREFETCH window: disabledpci 0000:00:06.0: PCI bridge, secondary bus 0000:09pci 0000:00:06.0: IO window: disabledpci 0000:00:06.0: MEM window: 0xd1200000-0xd12fffffpci 0000:00:06.0: PREFETCH window: disabledpci 0000:00:07.0: PCI bridge, secondary bus 0000:0apci 0000:00:07.0: IO window: 0x2000-0x2fffpci 0000:00:07.0: MEM window: 0xd1100000-0xd11fffffpci 0000:00:07.0: PREFETCH window: 0x000000d1000000-0x000000d10fffffpci 0000:00:14.4: PCI bridge, secondary bus 0000:80pci 0000:00:14.4: IO window: 0x1000-0x1fffpci 0000:00:14.4: MEM window: disabledpci 0000:00:14.4: PREFETCH window: disabledpci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18pci 0000:00:02.0: setting latency timer to 64pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16pci 0000:00:04.0: setting latency timer to 64pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17pci 0000:00:05.0: setting latency timer to 64pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18pci 0000:00:06.0: setting latency timer to 64pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19pci 0000:00:07.0: setting latency timer to 64bus: 00 index 0 io port: [0x00-0xffff]bus: 00 index 1 mmio: [0x000000-0xffffffff]bus: 01 index 0 io port: [0x7000-0x7fff]bus: 01 index 1 mmio: [0xd2400000-0xd24fffff]bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]bus: 01 index 3 mmio: [0x0-0x0]bus: 02 index 0 io port: [0x3000-0x6fff]bus: 02 index 1 mmio: [0xd1400000-0xd23fffff]bus: 02 index 2 mmio: [0xd0000000-0xd0ffffff]bus: 02 index 3 mmio: [0x0-0x0]bus: 08 index 0 mmio: [0x0-0x0]bus: 08 index 1 mmio: [0xd1300000-0xd13fffff]bus: 08 index 2 mmio: [0x0-0x0]bus: 08 index 3 mmio: [0x0-0x0]bus: 09 index 0 mmio: [0x0-0x0]bus: 09 index 1 mmio: [0xd1200000-0xd12fffff]bus: 09 index 2 mmio: [0x0-0x0]bus: 09 index 3 mmio: [0x0-0x0]bus: 0a index 0 io port: [0x2000-0x2fff]bus: 0a index 1 mmio: [0xd1100000-0xd11fffff]bus: 0a index 2 mmio: [0xd1000000-0xd10fffff]bus: 0a index 3 mmio: [0x0-0x0]bus: 80 index 0 io port: [0x1000-0x1fff]bus: 80 index 1 mmio: [0x0-0x0]bus: 80 index 2 mmio: [0x0-0x0]bus: 80 index 3 io port: [0x00-0xffff]bus: 80 index 4 mmio: [0x000000-0xffffffff]NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 7, 524288 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredNET: Registered protocol family 1Simple Boot Flag at 0x44 set to 0x1apm: BIOS not found.audit: initializing netlink socket (disabled)type=2000 audit(1234739357.592:1): initializedhighmem bounce pool size: 64 pagesHugeTLB registered 4 MB page size, pre-allocated 0 pagesVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Hook version: 2.6.28-rc7 2008/12/02msgmni has been set to 1714alg: No test for stdrng (krng)Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)io scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)pci 0000:01:00.0: Boot video device_OSC request fails_OSC request failspcieport-driver 0000:00:02.0: setting latency timer to 64pcieport-driver 0000:00:02.0: found MSI capabilitypcieport-driver 0000:00:02.0: irq 1278 for MSI/MSI-Xpci_express 0000:00:02.0:pcie00: allocate port servicepci_express 0000:00:02.0:pcie03: allocate port servicepcieport-driver 0000:00:04.0: setting latency timer to 64pcieport-driver 0000:00:04.0: found MSI capabilitypcieport-driver 0000:00:04.0: irq 1277 for MSI/MSI-Xpci_express 0000:00:04.0:pcie00: allocate port servicepci_express 0000:00:04.0:pcie02: allocate port servicepci_express 0000:00:04.0:pcie03: allocate port servicepcieport-driver 0000:00:05.0: setting latency timer to 64pcieport-driver 0000:00:05.0: found MSI capabilitypcieport-driver 0000:00:05.0: irq 1276 for MSI/MSI-Xpci_express 0000:00:05.0:pcie00: allocate port servicepci_express 0000:00:05.0:pcie03: allocate port servicepcieport-driver 0000:00:06.0: setting latency timer to 64pcieport-driver 0000:00:06.0: found MSI capabilitypcieport-driver 0000:00:06.0: irq 1275 for MSI/MSI-Xpci_express 0000:00:06.0:pcie00: allocate port servicepci_express 0000:00:06.0:pcie03: allocate port servicepcieport-driver 0000:00:07.0: setting latency timer to 64pcieport-driver 0000:00:07.0: found MSI capabilitypcieport-driver 0000:00:07.0: irq 1274 for MSI/MSI-Xpci_express 0000:00:07.0:pcie00: allocate port servicepci_express 0000:00:07.0:pcie03: allocate port serviceisapnp: Scanning for PnP cards...Clocksource tsc unstable (delta = -97980721 ns)isapnp: No Plug & Play device foundSerial: 8250/16550 driver4 ports, IRQ sharing enabledbrd: module loadedPNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all micecpuidle: using governor laddercpuidle: using governor menuTCP cubic registeredUsing IPI No-Shortcut moderegistered taskstats version 1BIOS EDD facility v0.16 2004-Jun-25, 2 devices foundFreeing unused kernel memory: 420k freedinput: AT Translated Set 2 keyboard as /class/input/input0SCSI subsystem initializedDriver 'sd' needs updating - please use bus_type methodsusbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driverehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17ehci_hcd 0000:00:12.2: setting latency timer to 64ehci_hcd 0000:00:12.2: EHCI Host Controllerehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaroundehci_hcd 0000:00:12.2: debug port 1ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2508500ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 6 ports detectedusb usb1: New USB device found, idVendor=1d6b, idProduct=0002usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb1: Product: EHCI Host Controllerusb usb1: Manufacturer: Linux 2.6.28.4-desktop-1mnb ehci_hcdusb usb1: SerialNumber: 0000:00:12.2ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19ehci_hcd 0000:00:13.2: setting latency timer to 64ehci_hcd 0000:00:13.2: EHCI Host Controllerehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaroundehci_hcd 0000:00:13.2: debug port 1ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2508400ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 6 ports detectedusb usb2: New USB device found, idVendor=1d6b, idProduct=0002usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb2: Product: EHCI Host Controllerusb usb2: Manufacturer: Linux 2.6.28.4-desktop-1mnb ehci_hcdusb usb2: SerialNumber: 0000:00:13.2ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driverohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16ohci_hcd 0000:00:12.0: setting latency timer to 64ohci_hcd 0000:00:12.0: OHCI Host Controllerohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2507000usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 3 ports detectedusb usb3: New USB device found, idVendor=1d6b, idProduct=0001usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb3: Product: OHCI Host Controllerusb usb3: Manufacturer: Linux 2.6.28.4-desktop-1mnb ohci_hcdusb usb3: SerialNumber: 0000:00:12.0ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16ohci_hcd 0000:00:12.1: setting latency timer to 64ohci_hcd 0000:00:12.1: OHCI Host Controllerohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2506000usb usb4: configuration #1 chosen from 1 choicehub 4-0:1.0: USB hub foundhub 4-0:1.0: 3 ports detectedusb usb4: New USB device found, idVendor=1d6b, idProduct=0001usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb4: Product: OHCI Host Controllerusb usb4: Manufacturer: Linux 2.6.28.4-desktop-1mnb ohci_hcdusb usb4: SerialNumber: 0000:00:12.1ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18ohci_hcd 0000:00:13.0: setting latency timer to 64ohci_hcd 0000:00:13.0: OHCI Host Controllerohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2505000usb usb5: configuration #1 chosen from 1 choicehub 5-0:1.0: USB hub foundhub 5-0:1.0: 3 ports detectedusb usb5: New USB device found, idVendor=1d6b, idProduct=0001usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb5: Product: OHCI Host Controllerusb usb5: Manufacturer: Linux 2.6.28.4-desktop-1mnb ohci_hcdusb usb5: SerialNumber: 0000:00:13.0ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18ohci_hcd 0000:00:13.1: setting latency timer to 64ohci_hcd 0000:00:13.1: OHCI Host Controllerohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2504000usb usb6: configuration #1 chosen from 1 choicehub 6-0:1.0: USB hub foundhub 6-0:1.0: 3 ports detectedusb usb6: New USB device found, idVendor=1d6b, idProduct=0001usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb6: Product: OHCI Host Controllerusb usb6: Manufacturer: Linux 2.6.28.4-desktop-1mnb ohci_hcdusb usb6: SerialNumber: 0000:00:13.1uhci_hcd: USB Universal Host Controller Interface driverInitializing USB Mass Storage driver...usbcore: registered new interface driver usb-storageUSB Mass Storage support registered.libata version 3.00 loaded.pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16pata_atiixp 0000:00:14.1: setting latency timer to 64scsi0 : pata_atiixpscsi1 : pata_atiixpata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8000 irq 14ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8008 irq 15usb 1-5: new high speed USB device using ehci_hcd and address 3usb 1-5: configuration #1 chosen from 1 choicescsi2 : SCSI emulation for USB Mass Storage devicesusb 1-5: New USB device found, idVendor=054c, idProduct=0243usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3usb 1-5: Product: Storage Mediausb 1-5: Manufacturer: Sonyusb 1-5: SerialNumber: 2A081001L5175usb-storage: device found at 3usb-storage: waiting for device to settle before scanningusb 1-6: new high speed USB device using ehci_hcd and address 4usb 1-6: configuration #1 chosen from 1 choiceusb 1-6: New USB device found, idVendor=046d, idProduct=09b8usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0usb 1-6: Product: HP Webcam ahci 0000:00:11.0: version 3.0ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA modeahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio scsi3 : ahciscsi4 : ahciscsi5 : ahciscsi6 : ahciscsi7 : ahciscsi8 : ahciata3: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508100 irq 22ata4: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508180 irq 22ata5: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508200 irq 22ata6: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508280 irq 22ata7: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508300 irq 22ata8: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508380 irq 22usb 3-1: new low speed USB device using ohci_hcd and address 2usb 3-1: configuration #1 chosen from 1 choiceusb 3-1: New USB device found, idVendor=15ca, idProduct=00c3usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0usb 3-1: Product: USB Optical Mouseusb 2-5: new high speed USB device using ehci_hcd and address 2usb 2-5: configuration #1 chosen from 1 choiceusb 2-5: New USB device found, idVendor=07ca, idProduct=a309usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3usb 2-5: Product: A309usb 2-5: Manufacturer: AVerMediausb 2-5: SerialNumber: 301159900462000Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000ata3: softreset failed (device not ready)ata3: failed due to HW bug, retry pmp=0input: SynPS/2 Synaptics TouchPad as /class/input/input1ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata3.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)ata3.00: configured for UDMA/100ata4: SATA link down (SStatus 0 SControl 300)ata5: SATA link down (SStatus 0 SControl 300)ata6: softreset failed (device not ready)ata6: failed due to HW bug, retry pmp=0ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-T30L, GC04, max UDMA/100ata6.00: configured for UDMA/100ata7: SATA link down (SStatus 0 SControl 300)ata8: SATA link down (SStatus 0 SControl 300)scsi 3:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)sd 3:0:0:0: [sda] Write Protect is offsd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAsd 3:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)sd 3:0:0:0: [sda] Write Protect is offsd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >sd 3:0:0:0: [sda] Attached SCSI diskscsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T30L GC04 PQ: 0 ANSI: 5scsi 2:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 0 CCSsd 2:0:0:0: [sdb] 31326208 512-byte hardware sectors: (16.0 GB/14.9 GiB)sd 2:0:0:0: [sdb] Write Protect is offsd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00sd 2:0:0:0: [sdb] Assuming drive cache: write throughsd 2:0:0:0: [sdb] 31326208 512-byte hardware sectors: (16.0 GB/14.9 GiB)sd 2:0:0:0: [sdb] Write Protect is offsd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >sd 2:0:0:0: [sdb] Attached SCSI removable diskusb-storage: device scan completekjournald starting. Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.TomoyoLinux Mandatory Access Control disabled by default.You need to install ccs-tools if you want to enable it.ACPI: AC Adapter [ACAD] (on-line)input: Power Button (FF) as /class/input/input2ACPI: Power Button (FF) [PWRF]input: Power Button (CM) as /class/input/input3ACPI: Power Button (CM) [PWRB]input: Lid Switch as /class/input/input4ACPI: Lid Switch [LID]processor ACPI_CPU:00: registered as cooling_device0ACPI: Processor [CPU0] (supports 8 throttling states)processor ACPI_CPU:01: registered as cooling_device1ACPI: WMI: Mapper loadedrtc_cmos 00:04: RTC can wake from S4rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0rtc0: alarms up to one day, 114 bytes nvram, hpet irqsACPI: Battery Slot [BAT0] (battery absent)lis3lv02d: laptop model unknown, using default axes configurationinput: ST LIS3LV02DL Accelerometer as /class/input/input5lis3lv02d driver loaded.r8169 Gigabit Ethernet driver 2.3LK-NAPI loadedr8169 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19r8169 0000:0a:00.0: setting latency timer to 64r8169 0000:0a:00.0: irq 1273 for MSI/MSI-Xeth0: RTL8168c/8111c at 0xf8272000, 00:1e:ec:9f:4d:d3, XID 3c2000c0 IRQ 1273sd 3:0:0:0: Attached scsi generic sg0 type 0scsi 6:0:0:0: Attached scsi generic sg1 type 5sd 2:0:0:0: Attached scsi generic sg2 type 0thermal LNXTHERM:01: registered as thermal_zone0Driver 'sr' needs updating - please use bus_type methodssr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 6:0:0:0: Attached scsi CD-ROM sr0acpi device:0b: registered as cooling_device2input: Video Bus as /class/input/input6ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)ACPI: Thermal Zone [TZ01] (66 C)ohci1394 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17ohci1394 0000:08:00.0: setting latency timer to 64sdhci: Secure Digital Host Controller Interface driversdhci: Copyright(c) Pierre Ossmanpiix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d1300000-d13007ff] Max Packet=[2048] IR/IT contexts=[4/4]sdhci-pci 0000:08:00.1: SDHCI controller found [197b:2382] (rev 0)sdhci-pci 0000:08:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17sdhci-pci 0000:08:00.1: setting latency timer to 64mmc0: SDHCI controller on PCI [0000:08:00.1] using DMAsdhci-pci 0000:08:00.2: SDHCI controller found [197b:2381] (rev 0)sdhci-pci 0000:08:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17sdhci-pci 0000:08:00.2: Refusing to bind to secondary interface.sdhci-pci 0000:08:00.2: PCI INT A disabledcfg80211: Using static regulatory domain infocfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)cfg80211: Calling CRDA for country: UScfg80211: Regulatory domain changed to country: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)ath5k_pci 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18ath5k_pci 0000:09:00.0: setting latency timer to 64ath5k_pci 0000:09:00.0: registered as 'phy0'phy0: Selected rate control algorithm 'pid'jmb38x_ms 0000:08:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17jmb38x_ms 0000:08:00.3: setting latency timer to 64leds-hp-disk driver loaded.input: PC Speaker as /class/input/input7ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)usbcore: registered new interface driver hiddevinput: USB Optical Mouse as /class/input/input8generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:12.0-1/input0usbcore: registered new interface driver usbhidusbhid: v2.6:USB HID core driverLinux video capture interface: v2.00uvcvideo: Found UVC 1.00 device HP Webcam (046d:09b8)uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.input: HP Webcam as /class/input/input9usbcore: registered new interface driver uvcvideoUSB Video Class driver (v0.1.0)dvb-usb: found a 'AVerMedia A309' in cold state, will try to load a firmwareusb 2-5: firmware: requesting dvb-usb-af9015.fwdvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)dvb_usb_af9015: probe of 2-5:1.0 failed with error -2usbcore: registered new interface driver dvb_usb_af9015HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16hda_intel: enable_msi set to 0x1 for device 103c:30fcHDA Intel 0000:00:14.2: setting latency timer to 64BUG: unable to handle kernel NULL pointer dereference at 0000001cIP: [<f86e00ba>] patch_stac92hd71bxx+0x52a/0x8a0 [snd_hda_intel]*pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/module/snd_pcm/initstateDumping ftrace buffer: (ftrace buffer empty)Modules linked in: snd_hda_intel(+) snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm dvb_usb_af9015 snd_timer dvb_usb hid_dell hid_multilaser hid_pl hid_cypress hid_zpff hid_gyration hid_bright hid_sony hid_samsung hid_microsoft hid_tmff hid_monterey hid_ezkey hid_apple hid_a4tech snd_page_alloc hid_logitech dvb_core snd_mixer_oss snd uvcvideo compat_ioctl32 videodev v4l1_compat usbhid ff_memless hid_cherry hid_sunplus hid_petalynx hid_belkin soundcore hid_chicony arc4 pcspkr leds_hp_disk jmb38x_ms ecb ath5k mac80211 led_class i2c_piix4 sdhci_pci sdhci i2c_core mmc_core cfg80211 ohci1394 ieee1394 memstick sr_mod video sg hid joydev output thermal r8169 mii lis3lv02d rtc_cmos evdev wmi processor button battery ac ata_piix ahci pata_atiixp libata usb_storage uhci_hcd ohci_hcd ehci_hcd usbcore sd_mod scsi_mod crc_t10dif ext3 jbdPid: 931, comm: modprobe Not tainted (2.6.28.4-desktop-1mnb #1) HP Pavilion dv7 Notebook PCEIP: 0060:[<f86e00ba>] EFLAGS: 00010212 CPU: 0EIP is at patch_stac92hd71bxx+0x52a/0x8a0 [snd_hda_intel]EAX: 00000000 EBX: 00000000 ECX: f8724a4a EDX: f7046000ESI: 0000001c EDI: 0000000d EBP: f6301c58 ESP: f6301c14 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068Process modprobe (pid: 931, ti=f6300000 task=f61f3de0 task.ti=f6300000)Stack: f8724a80 f6301c38 f7046000 f658aa00 f7046264 f8724a00 00000000 f86e940b f7046000 f6519294 f86c76d3 00000f20 0000001c 00000000 111d76b2 f658aa00 f6036e40 f6301cc8 f86e6b84 00000f20 00000000 00000000 00200200 fffb91c5Call Trace: [<f86c76d3>] ? snd_hda_codec_read+0x63/0x80 [snd_hda_intel] [<f86e6b84>] ? snd_hda_codec_new+0x380/0x529 [snd_hda_intel] [<f83cc144>] ? snd_device_new+0x24/0x80 [snd] [<f86e6dbf>] ? snd_hda_bus_new+0x92/0xc8 [snd_hda_intel] [<f86e5dab>] ? azx_probe+0x3eb/0xbc0 [snd_hda_intel] [<f86c6240>] ? azx_send_cmd+0x0/0x110 [snd_hda_intel] [<f86c6350>] ? azx_get_response+0x0/0x200 [snd_hda_intel] [<f86c5d20>] ? azx_power_notify+0x0/0x90 [snd_hda_intel] [<c026078e>] ? pci_device_probe+0x5e/0x80 [<c02c8c2d>] ? driver_probe_device+0x9d/0x2e0 [<c02c8ef9>] ? __driver_attach+0x89/0x90 [<c02c83eb>] ? bus_for_each_dev+0x4b/0x70 [<c02606d0>] ? pci_device_remove+0x0/0x40 [<c02c89d9>] ? driver_attach+0x19/0x20 [<c02c8e70>] ? __driver_attach+0x0/0x90 [<c02c7c97>] ? bus_add_driver+0x1c7/0x290 [<c02606d0>] ? pci_device_remove+0x0/0x40 [<c02c9099>] ? driver_register+0x69/0x140 [<c019918c>] ? __vunmap+0x9c/0xe0 [<c02609ea>] ? __pci_register_driver+0x4a/0x90 [<f872e000>] ? alsa_card_azx_init+0x0/0x19 [snd_hda_intel] [<f872e017>] ? alsa_card_azx_init+0x17/0x19 [snd_hda_intel] [<c0101116>] ? do_one_initcall+0x26/0x180 [<c015c3fc>] ? load_module+0x189c/0x1ca0 [<c018093c>] ? generic_file_aio_read+0x23c/0x6c0 [<c012c08f>] ? enqueue_task_fair+0x17f/0x360 [<c0115277>] ? xapic_wait_icr_idle+0x17/0x20 [<c01144e0>] ? native_smp_send_reschedule+0x30/0x50 [<c012d5f4>] ? try_to_wake_up+0xf4/0x280 [<c014ccda>] ? blocking_notifier_call_chain+0x1a/0x20 [<c015c896>] ? sys_init_module+0x96/0x1c0 [<c01ace1d>] ? sys_read+0x3d/0x70 [<c0103e93>] ? sysenter_do_call+0x12/0x2fCode: c0 00 00 00 00 00 00 00 e9 43 fe ff ff 8d 74 26 00 31 c0 e9 14 fe ff ff 90 c1 e0 02 89 45 ec 8b 55 dc 8b 75 ec 8b 82 e0 00 00 00 <8b> 04 30 c1 e8 1e 83 e8 01 0f 84 d9 fc ff ff 83 c3 01 83 fb 02 EIP: [<f86e00ba>] patch_stac92hd71bxx+0x52a/0x8a0 [snd_hda_intel] SS:ESP 0068:f6301c14---[ end trace 504e7a71182e899a ]---Non-volatile memory driver v1.2device-mapper: uevent: version 1.0.3device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.comEXT3 FS on sdb1, internal journalkjournald starting. Commit interval 5 secondsEXT3 FS on sdb6, internal journalEXT3-fs: mounted filesystem with ordered data mode.loop: module loadedAdding 2104472k swap on /dev/sdb5. Priority:-1 extents:1 across:2104472kAdding 5172888k swap on /dev/sda6. Priority:-2 extents:1 across:5172888kieee1394: Host added: ID:BUS[0-00:1023] GUID[883f0200b11140d7]NET: Registered protocol family 10lo: Disabled Privacy Extensionsr8169: eth0: link upr8169: eth0: link upNET: Registered protocol family 17usb 1-5: reset high speed USB device using ehci_hcd and address 3