# dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May 7 04:04:14 UTC 2006
root@bloom.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 Mobile Technology ML-28 (1600.07-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f42 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
AMD Features2=0x1<LAHF>
real memory = 401539072 (382 MB)
avail memory = 375676928 (358 MB)
kbd1 at kbdmux0
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
ohci0: <ATI SB400 USB Controller> mem 0xc0000000-0xc0000fff irq 11 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xc0001000-0xc0001fff irq 11 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xc0002000-0xc0002fff irq 11 at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <PCI-PCI bridge> at device 20.4 on pci0
pci5: <PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc0208000-0xc02080ff irq 5 at device 0.0 on pci5
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:c0:9f:a5:71:fb
pci5: <network> at device 2.0 (no driver attached)
cbb0: <PCI-CardBus Bridge> mem 0xc0209000-0xc0209fff irq 10 at device 9.0 on pci5
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xc0208800-0xc0208fff,0xc0200000-0xc0203fff irq 4 at device 9.2 on pci5
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:59:08:17
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:59:08:17
fwe0: Ethernet address: 02:c0:9f:59:08:17
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci5: <mass storage> at device 9.3 (no driver attached)
pci5: <base peripheral> at device 9.4 (no driver attached)
pci0: <multimedia, audio> at device 20.5 (no driver attached)
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1600072478 Hz quality 800
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (amr_linux, 0xffffffff806205d0, 0) error 6
ad0: 57231MB <IC25N060ATMR04 0 MO3OAD5A> at ata0-master UDMA100
acd0: CDRW <SONY CD-RW/DVD-ROM CRX835E/KPK4> at ata1-master PIO4
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
ppc0: cannot reserve I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: cannot reserve I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: cannot reserve I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: cannot reserve I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: cannot reserve I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: cannot reserve I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
pcm0: <ATI IXP 400> mem 0xc0003400-0xc00034ff irq 10 at device 20.5 on pci0
pcm0: <Conexant CX20468-21 AC97 Codec>
ppc0: cannot reserve I/O port range
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
stray irq7