# File generated by xorgconfig.## Copyright 2004 The X.Org Foundation## Permission is hereby granted, free of charge, to any person obtaining a# copy of this software and associated documentation files (the "Software"),# to deal in the Software without restriction, including without limitation# the rights to use, copy, modify, merge, publish, distribute, sublicense,# and/or sell copies of the Software, and to permit persons to whom the# Software is furnished to do so, subject to the following conditions:# # The above copyright notice and this permission notice shall be included in# all copies or substantial portions of the Software.# # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE# SOFTWARE.# # Except as contained in this notice, the name of The X.Org Foundation shall# not be used in advertising or otherwise to promote the sale, use or other# dealings in this Software without prior written authorization from# The X.Org Foundation.## **********************************************************************# Refer to the xorg.conf(5x) man page for details about the format of # this file.# **********************************************************************# **********************************************************************# Module section -- this section is used to specify# which dynamically loadable modules to load.# **********************************************************************#Section "Module"# This loads the DBE extension module. Load "dbe" # Double buffer extension# This loads the miscellaneous extensions module, and disables# initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection# This loads the font modules# Load "type1"# Load "speedo" Load "freetype"# Load "xtt"# This loads the GLX module Load "glx"# This loads the DRI module# Load "dri"EndSection# **********************************************************************# Files section. This allows default font and rgb paths to be set# **********************************************************************Section "Files"# The location of the RGB database. Note, this is the name of the# file minus the extension (like ".txt" or ".db"). There is normally# no need to change the default.# RgbPath "/usr/share/X11/rgb"# Multiple FontPath entries are allowed (which are concatenated together),# as well as specifying multiple comma-separated entries in one FontPath# command (or a combination of both methods)# # FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/Type1"# FontPath "/usr/lib/X11/fonts/local/"# FontPath "/usr/lib/X11/fonts/misc/"# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"# FontPath "/usr/lib/X11/fonts/Speedo/"# FontPath "/usr/lib/X11/fonts/Type1/"# FontPath "/usr/lib/X11/fonts/TrueType/"# FontPath "/usr/lib/X11/fonts/freefont/"# FontPath "/usr/lib/X11/fonts/75dpi/"# FontPath "/usr/lib/X11/fonts/100dpi/"# The module search path. The default path is shown here.# ModulePath "/usr/lib/modules"EndSection# **********************************************************************# Server flags section.# **********************************************************************Section "ServerFlags"# Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may# provide a better stack trace in the core dump to aid in debugging# Option "NoTrapSignals"# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence# (where n is 1 through 12). This allows clients to receive these key# events.#Option "TwinView" # Option "DontVTSwitch"# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence# This allows clients to receive this key event.# Option "DontZap"# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching# sequences. This allows clients to receive these key events.# Option "Dont Zoom"# Uncomment this to disable tuning with the xvidtune client. With# it the client can still run and fetch card and monitor attributes,# but it will not be allowed to change them. If it tries it will# receive a protocol error.# Option "DisableVidModeExtension"# Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune"# Uncomment this to disable dynamically modifying the input device# (mouse and keyboard) settings. # Option "DisableModInDev"# Uncomment this to enable the use of a non-local client to# change the keyboard or mouse settings (currently only xset).# Option "AllowNonLocalModInDev"EndSection# **********************************************************************# Input devices# **********************************************************************# **********************************************************************# Core keyboard's InputDevice section# **********************************************************************Section "InputDevice" Identifier "Keyboard1" Driver "kbd"# For most OSs the protocol can be omitted (it defaults to "Standard").# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),# uncomment the following line.# Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30"# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))# Option "Xleds" "1 2 3"# Option "LeftAlt" "Meta"# Option "RightAlt" "ModeShift"# To customise the XKB settings to suit your keyboard, modify the# lines below (which are the defaults). For example, for a non-U.S.# keyboard, you will probably want to use:# Option "XkbModel" "pc105"# If you have a US Microsoft Natural keyboard, you can use:# Option "XkbModel" "microsoft"## Then to change the language, change the Layout setting.# For example, a german layout can be obtained with:# Option "XkbLayout" "de"# or:# Option "XkbLayout" "de"# Option "XkbVariant" "nodeadkeys"## If you'd like to switch the positions of your capslock and# control keys, use:# Option "XkbOptions" "ctrl:swapcaps"# These are the default XKB settings for Xorg# Option "XkbRules" "xorg"# Option "XkbModel" "pc105"# Option "XkbLayout" "us"# Option "XkbVariant" ""# Option "XkbOptions" ""# Option "XkbDisable" Option "XkbRules" "xorg" Option "XkbModel" "microsoftmult" Option "XkbLayout" "us"EndSection# **********************************************************************# Core Pointer's InputDevice section# **********************************************************************Section "InputDevice"# Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "auto" # Auto detect Option "Device" "/dev/psaux"# When using XQUEUE, comment out the above two lines, and uncomment# the following line.# Option "Protocol" "Xqueue"# Mouse-speed setting for PS/2 mouse.# Option "Resolution" "256"# Baudrate and SampleRate are only for some Logitech mice. In# almost every case these lines should be omitted.# Option "BaudRate" "9600"# Option "SampleRate" "150"# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,# horizontal wheel to buttons 6 & 7. Change if your mouse has more than# 3 buttons and you need to map the wheel to different button ids to avoid# conflicts. Option "ZAxisMapping" "4 5 6 7"# Emulate3Buttons is an option for 2-button mice# Emulate3Timeout is the timeout in milliseconds (default is 50ms)# Option "Emulate3Buttons"# Option "Emulate3Timeout" "50"# ChordMiddle is an option for some 3-button Logitech mice# Option "ChordMiddle"EndSection# **********************************************************************# Other input device sections # this is optional and is required only if you# are using extended input devices. This is for example only. Refer# to the xorg.conf man page for a description of the options.# **********************************************************************## Section "InputDevice" # Identifier "Mouse2"# Driver "mouse"# Option "Protocol" "MouseMan"# Option "Device" "/dev/mouse2"# EndSection## Section "InputDevice"# Identifier "spaceball"# Driver "magellan"# Option "Device" "/dev/cua0"# EndSection## Section "InputDevice"# Identifier "spaceball2"# Driver "spaceorb"# Option "Device" "/dev/cua0"# EndSection## Section "InputDevice"# Identifier "touchscreen0"# Driver "microtouch"# Option "Device" "/dev/ttyS0"# Option "MinX" "1412"# Option "MaxX" "15184"# Option "MinY" "15372"# Option "MaxY" "1230"# Option "ScreenNumber" "0"# Option "ReportingMode" "Scaled"# Option "ButtonNumber" "1"# Option "SendCoreEvents"# EndSection## Section "InputDevice"# Identifier "touchscreen1"# Driver "elo2300"# Option "Device" "/dev/ttyS0"# Option "MinX" "231"# Option "MaxX" "3868"# Option "MinY" "3858"# Option "MaxY" "272"# Option "ScreenNumber" "0"# Option "ReportingMode" "Scaled"# Option "ButtonThreshold" "17"# Option "ButtonNumber" "1"# Option "SendCoreEvents"# EndSection# **********************************************************************# Monitor section# **********************************************************************# Any number of monitor sections may be presentSection "Monitor" Identifier "My Monitor"# HorizSync is in kHz unless units are specified.# HorizSync may be a comma separated list of discrete values, or a# comma separated list of ranges of values.# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S# USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5 - 79.0# HorizSync 30-64 # multisync# HorizSync 31.5, 35.2 # multiple fixed sync frequencies# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies# VertRefresh is in Hz unless units are specified.# VertRefresh may be a comma separated list of discrete values, or a# comma separated list of ranges of values.# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S# USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50-100 Option "DPMS"EndSectionSection "Monitor" Identifier "TV" HorizSync 30-95 VertRefresh 60EndSection#*********************************************************# Graphics device section# **********************************************************************# Any number of graphics device sections may be present# Device configured by xorgconfig:Section "Device" Identifier "nvidia0" Driver "nvidia" Option "TVStandard" "NTSC-M" BusID "PCI:1:0:0"# Option "TwinView" Option "DPMS"Screen 0EndSectionSection "Device" Identifier "nvidia1" Driver "nvidia" Option "TVStandard" "NTSC-M" BusID "PCI:1:0:0"# Option "TwinView"Screen 1EndSection# **********************************************************************# Screen sections# **********************************************************************# Any number of screen sections may be present. Each describes# the configuration of a single screen. A single specific screen section# may be specified from the X server command line with the "-screen"# option.Section "Screen" Identifier "Screen0" Device "nvidia0" Monitor "My Monitor" DefaultDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsectionEndSectionSection "Screen" Identifier "Screen_tv" Device "nvidia1" Monitor "TV" DefaultDepth 24 Subsection "Display" Depth 24 Modes "1024x768" EndSubsectionEndSection# *************# **********************************************************************# ServerLayout sections.# **********************************************************************# Any number of ServerLayout sections may be present. Each describes# the way multiple screens are organised. A specific ServerLayout# section may be specified from the X server command line with the# "-layout" option. In the absence of this, the first section is used.# When now ServerLayout section is present, the first Screen section# is used alone.Section "ServerLayout" Option "OffTime" "10"# The Identifier line must be present Identifier "Simple Layout"# Each Screen line specifies a Screen section name, and optionally# the relative position of other screens. The four names after# primary screen name are the screens to the top, bottom, left and right# of the primary screen. In this example, screen 2 is located to the# right of screen 1. Screen 0 "Screen0" Screen 1 "Screen_tv" RightOf "Screen0"# Each InputDevice line specifies an InputDevice section name and# optionally some options to specify the way the device is to be# used. Those options include "CorePointer", "CoreKeyboard" and# "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard"EndSection# Section "DRI"# Mode 0666# EndSection