qbe

Linux version 2.6.26-qbe (qbe@Elisa) (gcc version 4.3.1 20080626 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Jul 16 01:02:10 ART 2008BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f740000 (usable) BIOS-e820: 000000001f740000 - 000000001f750000 (ACPI data) BIOS-e820: 000000001f750000 - 000000001f800000 (ACPI NVS) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)503MB LOWMEM available.Entering add_active_range(0, 0, 128832) 0 entries of 256 usedZone PFN ranges:  DMA             0 ->     4096  Normal       4096 ->   128832Movable zone start PFN for each nodeearly_node_map[1] active PFN ranges    0:        0 ->   128832On node 0 totalpages: 128832  DMA zone: 32 pages used for memmap  DMA zone: 0 pages reserved  DMA zone: 4064 pages, LIFO batch:0  Normal zone: 975 pages used for memmap  Normal zone: 123761 pages, LIFO batch:31  Movable zone: 0 pages used for memmapDMI present.ACPI: RSDP 000FA3E0, 0014 (r0 ACPIAM)ACPI: RSDT 1F740000, 0030 (r1 A_M_I  OEMRSDT  12000620 MSFT       97)ACPI: FACP 1F740200, 0081 (r2 A M I  OEMFACP  12000620 MSFT       97)ACPI: DSDT 1F740370, 3E5C (r1  75i6G 75i6G286      286 INTL  2002026)ACPI: FACS 1F750000, 0040ACPI: APIC 1F740300, 006C (r1 A_M_I  OEMAPIC  12000620 MSFT       97)ACPI: OEMB 1F750040, 003F (r1 A_M_I  OEMBIOS  12000620 MSFT       97)ACPI: PM-Timer IO Port: 0x808ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode:  Flat.  Using 1 I/O APICsUsing ACPI (MADT) for SMP configuration informationAllocating PCI resources starting at 20000000 (gap: 1f800000:df500000)PM: Registered nosave memory: 000000000009f000 - 00000000000a0000PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000PM: Registered nosave memory: 00000000000e4000 - 0000000000100000SMP: Allowing 4 CPUs, 2 hotplug CPUsPERCPU: Allocating 39336 bytes of per cpu dataNR_CPUS: 4, nr_cpu_ids: 4Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127825Kernel command line: BOOT_IMAGE=2.6.26-qbe ro root=802mapped APIC to ffffb000 (fee00000)mapped IOAPIC to ffffa000 (fec00000)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0PID hash table entries: 2048 (order: 11, 8192 bytes)Detected 2663.340 MHz processor.Console: colour dummy device 80x25console [tty0] enabledDentry cache hash table entries: 65536 (order: 6, 262144 bytes)Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)Memory: 503116k/515328k available (2140k kernel code, 11816k reserved, 743k data, 252k init, 0k highmem)virtual kernel memory layout:    fixmap  : 0xfffb4000 - 0xfffff000   ( 300 kB)    vmalloc : 0xe0000000 - 0xfffb2000   ( 511 MB)    lowmem  : 0xc0000000 - 0xdf740000   ( 503 MB)      .init : 0xc03d7000 - 0xc0416000   ( 252 kB)      .data : 0xc031728e - 0xc03d0f40   ( 743 kB)      .text : 0xc0100000 - 0xc031728e   (2140 kB)Checking if this processor honours the WP bit even in supervisor mode...Ok.CPA: page pool initialized 1 of 1 pages preallocatedSLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1Calibrating delay using timer specific routine.. 5332.04 BogoMIPS (lpj=8883267)Security Framework initializedCapability LSM initializedMount-cache hash table entries: 512CPU: Trace cache: 12K uops, L1 D cache: 16KCPU: L2 cache: 1024KCPU: Physical Processor ID: 0CPU: Processor Core ID: 0Intel machine check architecture supported.Intel machine check reporting enabled on CPU#0.CPU0: Intel P4/Xeon Extended MCE MSRs (24) availableCPU0: Thermal monitoring enabledusing mwait in idle threads.Checking 'hlt' instruction... OK.ACPI: Core revision 20080321ENABLING IO-APIC IRQs..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1CPU0: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07Booting processor 1/1 ip 6000Initializing CPU#1Calibrating delay using timer specific routine.. 5328.96 BogoMIPS (lpj=8876743)CPU: Trace cache: 12K uops, L1 D cache: 16KCPU: L2 cache: 1024KCPU: Physical Processor ID: 0CPU: Processor Core ID: 1Intel machine check architecture supported.Intel machine check reporting enabled on CPU#1.CPU1: Intel P4/Xeon Extended MCE MSRs (24) availableCPU1: Thermal monitoring enabledCPU1: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07checking TSC synchronization [CPU#0 -> CPU#1]: passed.Brought up 2 CPUsTotal of 2 processors activated (10660.00 BogoMIPS).net_namespace: 652 bytesBooting paravirtualized kernel on bare hardwareNET: Registered protocol family 16ACPI: bus type pci registeredPCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1PCI: Using configuration type 1 for base accessSetting up standard PCI resourcesACPI: EC: Look up EC in DSDTACPI: Interpreter enabledACPI: (supports S0 S1 S3 S4 S5)ACPI: Using IOAPIC for interrupt routingACPI: PCI Root Bridge [PCI0] (0000:00)pci 0000:00:1f.0: Force enabled HPET at 0xfed00000pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCOpci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIOPCI: Transparent bridge - 0000:00:1e.0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 17, should be 0A [20080321]Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initACPI: bus type pnp registeredpnp: PnP ACPI: found 14 devicesACPI: ACPI bus type pnp unregisteredPCI: Using ACPI for IRQ routingNetLabel: InitializingNetLabel:  domain hash size = 128NetLabel:  protocols = UNLABELED CIPSOv4NetLabel:  unlabeled traffic allowed by defaulthpet clockevent registeredACPI: RTC can wake from S4system 00:07: ioport range 0x4d0-0x4d1 has been reservedsystem 00:07: ioport range 0x800-0x87f has been reservedsystem 00:07: ioport range 0x480-0x4bf has been reservedsystem 00:07: ioport range 0x900-0x90f has been reservedsystem 00:07: iomem range 0xfed20000-0xfed8ffff has been reservedsystem 00:07: iomem range 0xff380000-0xffefffff could not be reservedsystem 00:08: iomem range 0xfec00000-0xfec00fff has been reservedsystem 00:08: iomem range 0xfee00000-0xfee00fff could not be reservedsystem 00:0c: ioport range 0x290-0x29f has been reservedsystem 00:0d: iomem range 0x0-0x9ffff could not be reservedsystem 00:0d: iomem range 0xc0000-0xdffff could not be reservedsystem 00:0d: iomem range 0xe0000-0xfffff could not be reservedsystem 00:0d: iomem range 0x100000-0x1f7fffff could not be reservedsystem 00:0d: iomem range 0xfff00000-0xffffffff could not be reservedPCI: Bridge: 0000:00:1e.0  IO window: b000-bfff  MEM window: 0xff000000-0xff0fffff  PREFETCH window: 0x00000000ec700000-0x00000000ee6fffffPCI: Setting latency timer of device 0000:00:1e.0 to 64NET: Registered protocol family 2IP route cache hash table entries: 4096 (order: 2, 16384 bytes)TCP established hash table entries: 16384 (order: 5, 131072 bytes)TCP bind hash table entries: 16384 (order: 5, 131072 bytes)TCP: Hash tables configured (established 16384 bind 16384)TCP reno registeredNET: Registered protocol family 1Unpacking initramfs... doneFreeing initrd memory: 3202k freedapm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)apm: disabled - APM is not SMP safe.VFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)msgmni has been set to 988Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)io scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)pci 0000:00:02.0: Boot video devicevesafb: framebuffer at 0xf0000000, mapped to 0xe0080000, using 3072k, total 8000kvesafb: mode is 1024x768x16, linelength=2048, pages=4vesafb: scrolling: redrawvesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0Console: switching to colour frame buffer device 128x48fb0: VESA VGA frame buffer deviceisapnp: Scanning for PnP cards...Switched to high resolution mode on CPU 1Switched to high resolution mode on CPU 0isapnp: No Plug & Play device foundLinux agpgart interface v0.103agpgart: Detected an Intel 865 Chipset.agpgart: Detected 8060K stolen memory.agpgart: AGP aperture is 128M @ 0xf0000000Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabledserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 21ACPI: PCI interrupt for device 0000:01:00.0 disabledinput: Macintosh mouse button emulation as /class/input/input0PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all micecpuidle: using governor laddercpuidle: using governor menuTCP cubic registeredNET: Registered protocol family 17ieee80211: 802.11 data/management/control stack, git-1.1.13ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>ieee80211_crypt: registered algorithm 'NULL'Using IPI No-Shortcut moderegistered taskstats version 1Freeing unused kernel memory: 252k freedNo dock devices found.input: AT Translated Set 2 keyboard as /class/input/input1SCSI subsystem initializedlibata version 3.00 loaded.ata_piix 0000:00:1f.1: version 2.12ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:00:1f.1 to 64scsi0 : ata_piixscsi1 : ata_piixata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15ata1.00: ATAPI: SONY    DVD RW DW-Q120A, PYS3, max UDMA/66ata1.00: configured for UDMA/66scsi 0:0:0:0: CD-ROM            SONY     DVD RW DW-Q120A  PYS3 PQ: 0 ANSI: 5ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]PCI: Setting latency timer of device 0000:00:1f.2 to 64scsi2 : ata_piixscsi3 : ata_piixata3: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc000 irq 18ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xc008 irq 18ata3.00: ATA-7: WDC WD1600JS-00NCB1, 10.02E02, max UDMA/133ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)ata3.00: configured for UDMA/133scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600JS-00N 10.0 PQ: 0 ANSI: 5usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbUSB Universal Host Controller Interface driver v3.0ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:00:1d.0 to 64uhci_hcd 0000:00:1d.0: UHCI Host Controlleruhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detectedusb usb1: New USB device found, idVendor=1d6b, idProduct=0001usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb1: Product: UHCI Host Controllerusb usb1: Manufacturer: Linux 2.6.26-qbe uhci_hcdusb usb1: SerialNumber: 0000:00:1d.0ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19PCI: Setting latency timer of device 0000:00:1d.1 to 64uhci_hcd 0000:00:1d.1: UHCI Host Controlleruhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detectedusb usb2: New USB device found, idVendor=1d6b, idProduct=0001usb 1-2: new full speed USB device using uhci_hcd and address 2usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb2: Product: UHCI Host Controllerusb usb2: Manufacturer: Linux 2.6.26-qbe uhci_hcdusb usb2: SerialNumber: 0000:00:1d.1ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:00:1d.2 to 64uhci_hcd 0000:00:1d.2: UHCI Host Controlleruhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detectedusb 1-2: configuration #1 chosen from 1 choiceusb 1-2: New USB device found, idVendor=059f, idProduct=1018usb 1-2: New USB device strings: Mfr=10, Product=11, SerialNumber=3usb 1-2: Product: LaCie Hard Drive USBusb 1-2: Manufacturer: LaCieusb 1-2: SerialNumber: 00E0010201CD0usb usb3: New USB device found, idVendor=1d6b, idProduct=0001usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb3: Product: UHCI Host Controllerusb usb3: Manufacturer: Linux 2.6.26-qbe uhci_hcdusb usb3: SerialNumber: 0000:00:1d.2ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:00:1d.3 to 64uhci_hcd 0000:00:1d.3: UHCI Host Controlleruhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800usb usb4: configuration #1 chosen from 1 choicehub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detectedusb usb4: New USB device found, idVendor=1d6b, idProduct=0001usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb4: Product: UHCI Host Controllerusb usb4: Manufacturer: Linux 2.6.26-qbe uhci_hcdusb usb4: SerialNumber: 0000:00:1d.3ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23PCI: Setting latency timer of device 0000:00:1d.7 to 64ehci_hcd 0000:00:1d.7: EHCI Host Controllerehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5ehci_hcd 0000:00:1d.7: debug port 1PCI: cache line size of 128 is not supported by device 0000:00:1d.7ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff27fc00ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb5: configuration #1 chosen from 1 choicehub 5-0:1.0: USB hub foundhub 5-0:1.0: 8 ports detectedusb usb5: New USB device found, idVendor=1d6b, idProduct=0002usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb5: Product: EHCI Host Controllerusb usb5: Manufacturer: Linux 2.6.26-qbe ehci_hcdusb usb5: SerialNumber: 0000:00:1d.7Driver 'sr' needs updating - please use bus_type methodsDriver 'sd' needs updating - please use bus_type methodssr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 0:0:0:0: Attached scsi CD-ROM sr0sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)sd 2:0:0:0: [sda] Write Protect is offsd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAusb 5-2: new high speed USB device using ehci_hcd and address 2sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)sd 2:0:0:0: [sda] Write Protect is offsd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 >sd 2:0:0:0: [sda] Attached SCSI diskusb 5-2: configuration #1 chosen from 1 choiceusb 5-2: New USB device found, idVendor=059f, idProduct=1018usb 5-2: New USB device strings: Mfr=10, Product=11, SerialNumber=3usb 5-2: Product: LaCie Hard Drive USBusb 5-2: Manufacturer: LaCieusb 5-2: SerialNumber: 00E0010201CD0usb 1-2: USB disconnect, address 2EXT3-fs: INFO: recovery required on readonly filesystem.EXT3-fs: write access will be enabled during recovery.kjournald starting.  Commit interval 5 secondsEXT3-fs: recovery complete.EXT3-fs: mounted filesystem with ordered data mode.rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0rtc0: alarms up to one month8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip8139cp 0000:01:05.0: Try the "8139too" driver instead.8139too Fast Ethernet driver 0.9.28ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 22 (level, low) -> IRQ 22eth0: RealTek RTL8139 at 0xe03a4c00, 00:13:8f:a7:26:e3, IRQ 22eth0:  Identified 8139 chip type 'RTL-8101'ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17PCI: Setting latency timer of device 0000:00:1f.5 to 64intel8x0_measure_ac97_clock: measured 51748 usecsintel8x0: clocking to 48000usbcore: registered new interface driver snd-usb-audioFloppy drive(s): fd0 is 1.44MFDC 0 is a post-1991 82077Linux video capture interface: v2.00usbcore: registered new interface driver gspcagspca: gspca driver 01.00.20 registeredvboxdrv: Trying to deactivate the NMI watchdog permanently...vboxdrv: Successfully done.vboxdrv: Found 2 processor cores.vboxdrv: fAsync=0 offMin=0x776 offMax=0x9b0avboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.vboxdrv: Successfully loaded version 2.0.4 (interface 0x00090000).QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice BellardKQEMU installed, max_locked_mem=253288kB.device-mapper: uevent: version 1.0.3device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.comtun: Universal TUN/TAP device driver, 1.6tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>fuse init (API version 7.9)loop: module loadedinput: Power Button (FF) as /class/input/input2ACPI: Power Button (FF) [PWRF]input: Power Button (CM) as /class/input/input3ACPI: Power Button (CM) [PWRB]ACPI: ACPI0007:00 is registered as cooling_device0ACPI: Processor [CPU1] (supports 8 throttling states)ACPI: ACPI0007:01 is registered as cooling_device1ACPI: Processor [CPU2] (supports 8 throttling states)pci_hotplug: PCI Hot Plug PCI Core version: 0.5shpchp: Standard Hot Plug PCI Controller Driver version: 0.4intel_rng: FWH not detectedInitializing USB Mass Storage driver...scsi4 : SCSI emulation for USB Mass Storage devicesusbcore: registered new interface driver usb-storageUSB Mass Storage support registered.usb-storage: device found at 2usb-storage: waiting for device to settle before scanningsr 0:0:0:0: Attached scsi generic sg0 type 5sd 2:0:0:0: Attached scsi generic sg1 type 0ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17input: PC Speaker as /class/input/input4PPP generic driver version 2.4.2ppdev: user-space parallel port driverinput: ImPS/2 Generic Wheel Mouse as /class/input/input5parport_pc 00:06: reported by Plug and Play ACPIparport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]lp0: using parport0 (interrupt-driven).EXT3 FS on sda2, internal journalkjournald starting.  Commit interval 5 secondsEXT3 FS on sda6, internal journalEXT3-fs: mounted filesystem with ordered data mode.Adding 1052216k swap on /dev/sda5.  Priority:-1 extents:1 across:1052216kscsi 4:0:0:0: Direct-Access     SAMSUNG  HD502IJ               PQ: 0 ANSI: 2 CCSsd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)sd 4:0:0:0: [sdb] Write Protect is offsd 4:0:0:0: [sdb] Mode Sense: 34 00 00 00sd 4:0:0:0: [sdb] Assuming drive cache: write throughsd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)sd 4:0:0:0: [sdb] Write Protect is offsd 4:0:0:0: [sdb] Mode Sense: 34 00 00 00sd 4:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sdb2sd 4:0:0:0: [sdb] Attached SCSI disksd 4:0:0:0: Attached scsi generic sg2 type 0usb-storage: device scan completew83627ehf: Found W83627EHG chip at 0x290w83627ehf w83627ehf.656: Setting VID input voltage to VRM10eth0: link up, 100Mbps, full-duplex, lpa 0x41E1[drm] Initialized drm 1.1.0 20060810ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:00:02.0 to 64[drm] Initialized i915 1.6.0 20060119 on minor 0NET: Registered protocol family 10lo: Disabled Privacy Extensionseth0: no IPv6 routers presentkjournald starting.  Commit interval 5 secondsEXT3 FS on sdb1, internal journalEXT3-fs: recovery complete.EXT3-fs: mounted filesystem with ordered data mode.ReiserFS: sdb2: found reiserfs format "3.6" with standard journalReiserFS: sdb2: using ordered data modeReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: sdb2: checking transaction log (sdb2)ReiserFS: sdb2: replayed 402 transactions in 11 secondsReiserFS: sdb2: Using r5 hash to sort namesReiserFS: sdb2: Removing [182 202 0x0 SD]..doneReiserFS: sdb2: Removing [179 182 0x0 SD]..doneReiserFS: sdb2: Removing [22 179 0x0 SD]..doneReiserFS: sdb2: There were 3 uncompleted unlinks/truncates. Completedcdrom: This disc doesn't have any tracks I recognize!end_request: I/O error, dev sr0, sector 0Buffer I/O error on device sr0, logical block 0end_request: I/O error, dev sr0, sector 0Buffer I/O error on device sr0, logical block 0eth0: link up, 100Mbps, full-duplex, lpa 0x41E1eth0: no IPv6 routers presenteth0: link up, 100Mbps, full-duplex, lpa 0x41E1eth0: no IPv6 routers presenteth0: link up, 100Mbps, full-duplex, lpa 0x41E1eth0: no IPv6 routers presenteth0: link up, 100Mbps, full-duplex, lpa 0x41E1eth0: no IPv6 routers presenteth0: link up, 100Mbps, full-duplex, lpa 0x41E1eth0: no IPv6 routers presenteth0: link up, 100Mbps, full-duplex, lpa 0x41E1eth0: no IPv6 routers presenteth0: link up, 100Mbps, full-duplex, lpa 0x41E1eth0: no IPv6 routers presenteth0: link up, 100Mbps, full-duplex, lpa 0x41E1eth0: no IPv6 routers presentcdrom: This disc doesn't have any tracks I recognize!end_request: I/O error, dev sr0, sector 0Buffer I/O error on device sr0, logical block 0end_request: I/O error, dev sr0, sector 0Buffer I/O error on device sr0, logical block 0audacious[20307]: segfault at 8 ip b74edf90 sp b222ee60 error 4 in libX11.so.6.2.0[b74a9000+eb000]cdrom: This disc doesn't have any tracks I recognize!end_request: I/O error, dev sr0, sector 0Buffer I/O error on device sr0, logical block 0end_request: I/O error, dev sr0, sector 0Buffer I/O error on device sr0, logical block 0warning: `cdrecord' uses 32-bit capabilities (legacy support in use)NET: Registered protocol family 8NET: Registered protocol family 20