rendered paste bodysmartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HM160HI
Serial Number: S14QJF0PA27082
Firmware Version: HH100-10
User Capacity: 160,041,885,696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Sun Jan 11 11:53:00 2009 EET
==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 61) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 61) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 90
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2000
4 Start_Stop_Count 0x0032 031 031 000 Old_age Always - 699573
5 Reallocated_Sector_Ct 0x0033 097 097 010 Pre-fail Always - 37
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 5872
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 960
191 G-Sense_Error_Rate 0x0032 080 080 000 Old_age Always - 207346
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 151
194 Temperature_Celsius 0x0022 118 073 000 Old_age Always - 40 (Lifetime Min/Max 16/55)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 292819
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 2268
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 4740
199 UDMA_CRC_Error_Count 0x0036 252 252 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 252 252 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 23 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 23 occurred at disk power-on lifetime: 1620 hours (67 days + 12 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 cf 14 e4 e7 Error: UNC 8 sectors at LBA = 0x07e414cf = 132388047
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 cf 14 e4 e7 00 00:26:02.625 READ DMA
ec 00 00 00 00 00 a0 00 00:25:58.750 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:25:58.750 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:25:54.812 IDENTIFY DEVICE
Error 22 occurred at disk power-on lifetime: 1620 hours (67 days + 12 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 08 cf 14 e4 e7 Error: AMNF 8 sectors at LBA = 0x07e414cf = 132388047
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 cf 14 e4 e7 00 00:25:54.750 READ DMA
ec 00 00 00 00 00 a0 00 00:25:48.687 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:25:48.687 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:25:48.687 IDENTIFY DEVICE
Error 21 occurred at disk power-on lifetime: 1620 hours (67 days + 12 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 cf 14 e4 e7 Error: UNC 8 sectors at LBA = 0x07e414cf = 132388047
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 cf 14 e4 e7 00 00:25:48.625 READ DMA
ec 00 00 00 00 00 a0 00 00:25:46.500 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:25:46.500 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:25:46.500 IDENTIFY DEVICE
Error 20 occurred at disk power-on lifetime: 1620 hours (67 days + 12 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 a0 67 14 e4 e7 Error: AMNF 160 sectors at LBA = 0x07e41467 = 132387943
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 a0 67 14 e4 e7 00 00:25:28.500 READ DMA
ec 00 00 00 00 00 a0 00 00:25:24.562 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:25:24.562 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:25:24.562 IDENTIFY DEVICE
Error 19 occurred at disk power-on lifetime: 1620 hours (67 days + 12 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 a0 67 14 e4 e7 Error: UNC 160 sectors at LBA = 0x07e41467 = 132387943
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 a0 67 14 e4 e7 00 00:25:24.500 READ DMA
ec 00 00 00 00 00 a0 00 00:25:21.312 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:25:21.312 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:25:21.312 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 5866 -
# 2 Short offline Completed without error 00% 5865 -
# 3 Extended offline Aborted by host 150% 5865 -
# 4 Short offline Aborted by host 150% 5647 -
# 5 Extended offline Completed without error 00% 2934 -
# 6 Short offline Completed without error 00% 1 -
# 7 Short offline Aborted by host 150% 1 -
# 8 Short offline Completed without error 00% 0 -
# 9 Short offline Completed without error 00% 0 -
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.