rendered paste body# dmesg | tail
[ 47.200041] eth0: no IPv6 routers present
[ 71.372007] UDF-fs: No VRS found
[ 71.412018] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 71.625762] ISO 9660 Extensions: RRIP_1991A
[ 181.124012] UDF-fs: No VRS found
[ 181.180012] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 181.372731] ISO 9660 Extensions: RRIP_1991A
[ 380.344390] UDF-fs: No VRS found
[ 380.383051] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 380.547275] ISO 9660 Extensions: RRIP_1991A
root@debian:/home/alek# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-12) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Mon Dec 15 18:15:07 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
[ 0.000000] BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131068) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131068
[ 0.000000] HighMem 131068 -> 131068
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131068
[ 0.000000] On node 0 totalpages: 131068
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125980 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F75A0, 0014 (r0 ASUS )
[ 0.000000] ACPI: RSDT 1FFFC000, 0030 (r1 ASUS <P4B> 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 1FFFC100, 0074 (r1 ASUS <P4B> 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 1FFFC180, 269F (r1 ASUS <P4B> 1000 MSFT 100000B)
[ 0.000000] ACPI: FACS 1FFFF000, 0040
[ 0.000000] ACPI: BOOT 1FFFC040, 0028 (r1 ASUS <P4B> 42302E31 MSFT 31313031)
[ 0.000000] ACPI: APIC 1FFFC080, 005A (r1 ASUS <P4B> 42302E31 MSFT 31313031)
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130044
[ 0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=302
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1513.516 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 509848k/524272k available (1769k kernel code, 13856k reserved, 752k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdfffc000 ( 511 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba46b - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba46b (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084252] Calibrating delay using timer specific routine.. 3031.70 BogoMIPS (lpj=6063403)
[ 0.084441] Security Framework initialized
[ 0.084506] SELinux: Disabled at boot.
[ 0.084564] Capability LSM initialized
[ 0.084647] Mount-cache hash table entries: 512
[ 0.085025] Initializing cgroup subsys ns
[ 0.085092] Initializing cgroup subsys cpuacct
[ 0.085149] Initializing cgroup subsys devices
[ 0.085247] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.085348] CPU: L2 cache: 256K
[ 0.085403] CPU: Hyper-Threading is disabled
[ 0.085461] Intel machine check architecture supported.
[ 0.085525] Intel machine check reporting enabled on CPU#0.
[ 0.085585] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.085647] CPU0: Thermal monitoring enabled
[ 0.085731] Checking 'hlt' instruction... OK.
[ 0.100847] SMP alternatives: switching to UP code
[ 0.116974] Freeing SMP alternatives: 16k freed
[ 0.117046] ACPI: Core revision 20080321
[ 0.124711] ENABLING IO-APIC IRQs
[ 0.124992] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.164762] CPU0: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 0a
[ 0.168010] Brought up 1 CPUs
[ 0.168010] Total of 1 processors activated (3031.70 BogoMIPS).
[ 0.168010] CPU0 attaching sched-domain:
[ 0.168010] domain 0: span 0
[ 0.168010] groups: 0
[ 0.168010] net_namespace: 660 bytes
[ 0.168010] Booting paravirtualized kernel on bare hardware
[ 0.168010] NET: Registered protocol family 16
[ 0.168010] ACPI: bus type pci registered
[ 0.170225] PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=2
[ 0.170289] PCI: Using configuration type 1 for base access
[ 0.170372] Setting up standard PCI resources
[ 0.176011] ACPI: EC: Look up EC in DSDT
[ 0.184011] ACPI: Interpreter enabled
[ 0.184011] ACPI: (supports S0 S1 S4 S5)
[ 0.184011] ACPI: Using IOAPIC for interrupt routing
[ 0.197860] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.198277] pci 0000:00:1f.0: Enabled i801 SMBus device
[ 0.198346] pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
[ 0.198416] pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO
[ 0.199349] PCI: Transparent bridge - 0000:00:1e.0
[ 0.199437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.199639] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.199780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.203006] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.203740] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.204570] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.205397] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.206119] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.206917] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.207716] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.208549] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.209498] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.209635] pnp: PnP ACPI init
[ 0.209714] ACPI: bus type pnp registered
[ 0.220910] pnp: PnP ACPI: found 15 devices
[ 0.220977] ACPI: ACPI bus type pnp unregistered
[ 0.221038] PnPBIOS: Disabled by ACPI PNP
[ 0.221696] PCI: Using ACPI for IRQ routing
[ 0.222208] ACPI: RTC can wake from S4
[ 0.222341] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.222404] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.222465] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.222533] system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.222602] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.222681] system 00:02: ioport range 0xe400-0xe47f has been reserved
[ 0.222741] system 00:02: ioport range 0xe800-0xe81f could not be reserved
[ 0.222801] system 00:02: ioport range 0xec00-0xec3f has been reserved
[ 0.222864] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.222932] system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.222999] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.223080] system 00:0e: ioport range 0x3f0-0x3f1 has been reserved
[ 0.254148] PCI: Bridge: 0000:00:01.0
[ 0.254210] IO window: disabled.
[ 0.254266] MEM window: 0xee000000-0xefdfffff
[ 0.254323] PREFETCH window: 0x00000000eff00000-0x00000000f7ffffff
[ 0.254389] PCI: Bridge: 0000:00:1e.0
[ 0.254444] IO window: c000-dfff
[ 0.254501] MEM window: 0xed800000-0xedffffff
[ 0.254559] PREFETCH window: 0x00000000efe00000-0x00000000efefffff
[ 0.254635] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.254648] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.254710] NET: Registered protocol family 2
[ 0.254972] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.255470] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.255721] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.255991] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.256117] TCP reno registered
[ 0.256495] NET: Registered protocol family 1
[ 0.256815] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 0.764307] it is
[ 1.318969] Freeing initrd memory: 6056k freed
[ 1.319420] Simple Boot Flag at 0x3a set to 0x1
[ 1.320498] audit: initializing netlink socket (disabled)
[ 1.321424] type=2000 audit(1230645148.320:1): initialized
[ 1.321725] Total HugeTLB memory allocated, 0
[ 1.321944] VFS: Disk quotas dquot_6.5.1
[ 1.322051] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.322188] msgmni has been set to 1008
[ 1.322527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.322603] io scheduler noop registered
[ 1.322657] io scheduler anticipatory registered
[ 1.322711] io scheduler deadline registered
[ 1.322793] io scheduler cfq registered (default)
[ 1.322933] pci 0000:01:00.0: Boot video device
[ 1.323730] isapnp: Scanning for PnP cards...
[ 1.678351] isapnp: No Plug & Play device found
[ 1.685096] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.685373] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.685641] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.686483] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.686878] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.690278] brd: module loaded
[ 1.690576] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.693738] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.693810] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.694243] mice: PS/2 mouse device common for all mice
[ 1.694626] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.694715] rtc0: alarms up to one month
[ 1.694864] cpuidle: using governor ladder
[ 1.694921] cpuidle: using governor menu
[ 1.694983] No iBFT detected.
[ 1.695901] TCP cubic registered
[ 1.695960] NET: Registered protocol family 17
[ 1.696182] Using IPI No-Shortcut mode
[ 1.696574] registered taskstats version 1
[ 1.696851] rtc_cmos 00:05: setting system clock to 2008-12-30 13:52:29 UTC (1230645149)
[ 1.697561] Freeing unused kernel memory: 244k freed
[ 1.715734] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.912505] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.804163] No dock devices found.
[ 2.920523] SCSI subsystem initialized
[ 3.040355] libata version 3.00 loaded.
[ 3.160998] Uniform Multi-Platform E-IDE driver
[ 3.161072] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.194100] ICH2: IDE controller (0x8086:0x244b rev 0x12) at PCI slot 0000:00:1f.1
[ 3.194202] ICH2: not 100% native mode: will probe irqs later
[ 3.194277] ide0: BM-DMA at 0xb800-0xb807
[ 3.194345] ide1: BM-DMA at 0xb808-0xb80f
[ 3.194406] Probing IDE interface ide0...
[ 3.389489] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.455315] usbcore: registered new interface driver usbfs
[ 3.455444] usbcore: registered new interface driver hub
[ 3.455573] usbcore: registered new device driver usb
[ 3.469181] USB Universal Host Controller Interface driver v3.0
[ 3.480227] hda: WDC WD1600JB-00GVA0, ATA DISK drive
[ 3.615055] Floppy drive(s): fd0 is 1.44M
[ 3.633697] FDC 0 is a post-1991 82077
[ 4.152120] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.153375] hda: UDMA/100 mode selected
[ 4.154723] Probing IDE interface ide1...
[ 4.888186] hdc: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
[ 5.672181] hdd: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive
[ 5.728118] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.728558] hdc: UDMA/33 mode selected
[ 5.729105] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.729268] hdd: UDMA/33 mode selected
[ 5.729522] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.764204] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.764204] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
[ 5.764205] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.764205] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 5.764205] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 5.764205] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000b400
[ 5.780064] usb usb1: configuration #1 chosen from 1 choice
[ 5.780182] hub 1-0:1.0: USB hub found
[ 5.780252] hub 1-0:1.0: 2 ports detected
[ 5.859465] hda: max request size: 512KiB
[ 5.862297] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 5.868746] hda: cache flushes supported
[ 5.868921] hda: hda1 hda2 hda3
[ 5.884331] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.884403] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.884471] usb usb1: Product: UHCI Host Controller
[ 5.884527] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 5.884584] usb usb1: SerialNumber: 0000:00:1f.2
[ 5.884724] 8139cp 0000:02:0e.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 5.884794] 8139cp 0000:02:0e.0: Try the "8139too" driver instead.
[ 5.889352] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 23
[ 5.889485] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 5.889493] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 5.889641] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 5.889763] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000b000
[ 5.889999] usb usb2: configuration #1 chosen from 1 choice
[ 5.890115] hub 2-0:1.0: USB hub found
[ 5.890187] hub 2-0:1.0: 2 ports detected
[ 5.890486] 8139too Fast Ethernet driver 0.9.28
[ 5.908802] hdc: ATAPI 52X DVD-ROM drive, 256kB Cache
[ 5.908802] Uniform CD-ROM driver Revision: 3.20
[ 5.918558] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 5.992394] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.992466] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.992534] usb usb2: Product: UHCI Host Controller
[ 5.992589] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 5.992647] usb usb2: SerialNumber: 0000:00:1f.4
[ 5.992854] 8139too 0000:02:0e.0: enabling device (0004 -> 0007)
[ 5.992930] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 5.994017] eth0: RealTek RTL8139 at 0xd000, 00:80:48:32:03:ba, IRQ 18
[ 5.994079] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 6.292766] PM: Starting manual resume from disk
[ 6.364906] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.364977] EXT3-fs: write access will be enabled during recovery.
[ 11.090568] kjournald starting. Commit interval 5 seconds
[ 11.090568] EXT3-fs: hda2: orphan cleanup on readonly fs
[ 11.090568] ext3_orphan_cleanup: deleting unreferenced inode 1179656
[ 11.090568] EXT3-fs: hda2: 1 orphan inode deleted
[ 11.090568] EXT3-fs: recovery complete.
[ 11.116004] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.815080] udevd version 125 started
[ 14.961483] Linux agpgart interface v0.103
[ 14.997840] agpgart: Detected an Intel 845G Chipset.
[ 15.002026] agpgart: AGP aperture is 64M @ 0xf8000000
[ 15.027041] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.066692] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.421089] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 15.842902] input: Power Button (FF) as /class/input/input1
[ 15.873453] ACPI: Power Button (FF) [PWRF]
[ 15.873644] input: Power Button (CM) as /class/input/input2
[ 15.902720] ACPI: Power Button (CM) [PWRB]
[ 16.601876] intel_rng: FWH not detected
[ 16.606813] input: PC Speaker as /class/input/input3
[ 16.700198] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 17.637463] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 17.637642] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 17.637726] iTCO_wdt: No card detected
[ 18.026115] Emu10k1_gameport 0000:02:0d.1: enabling device (0004 -> 0005)
[ 18.051723] gameport: EMU10K1 is pci0000:02:0d.1/gameport0, io 0xd400, speed 917kHz
[ 18.351928] parport_pc 00:09: reported by Plug and Play ACPI
[ 18.352090] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 19.494630] EMU10K1_Audigy 0000:02:0d.0: enabling device (0004 -> 0005)
[ 19.494716] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 20.712014] Adding 979956k swap on /dev/hda3. Priority:-1 extents:1 across:979956k
[ 21.067071] EXT3 FS on hda2, internal journal
[ 21.821974] loop: module loaded
[ 23.525845] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 25.589585] lp0: using parport0 (interrupt-driven).
[ 25.632202] ppdev: user-space parallel port driver
[ 26.174549] NET: Registered protocol family 10
[ 26.175480] lo: Disabled Privacy Extensions
[ 28.073019] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 47.200041] eth0: no IPv6 routers present
[ 71.372007] UDF-fs: No VRS found
[ 71.412018] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 71.625762] ISO 9660 Extensions: RRIP_1991A
[ 181.124012] UDF-fs: No VRS found
[ 181.180012] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 181.372731] ISO 9660 Extensions: RRIP_1991A
[ 380.344390] UDF-fs: No VRS found
[ 380.383051] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 380.547275] ISO 9660 Extensions: RRIP_1991A