rendered paste body<4>Linux version 2.4.31 (root@box) (gcc version 2.95.4 20011002 (Debian prerelease)) #6 SMP Fri Oct 21 15:15:54 EDT 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<4>On node 0 totalpages: 131056
<4>zone(0): 4096 pages.
<4>zone(1): 126960 pages.
<4>zone(2): 0 pages.
<6>DMI not present.
<6>ACPI: RSDP (v000 QEMU ) @ 0x000fa5d0
<6>ACPI: RSDT (v000 QEMU QEMURSDT 0x00000001 QEMU 0x00000001) @ 0x1fff0000
<6>ACPI: FADT (v000 QEMU QEMUFACP 0x00000001 QEMU 0x00000001) @ 0x1fff002c
<6>ACPI: MADT (v000 QEMU QEMUAPIC 0x00000001 QEMU 0x00000001) @ 0x1fff0938
<6>ACPI: DSDT (v001 BXPC BXDSDT 0x00000001 INTL 0x20060912) @ 0x00000000
<6>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 Pentium(tm) Pro APIC version 17
<6>ACPI: Skipping IOAPIC probe due to 'noapic' option.
<4>Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=788 xmodule=fbdev initrd=minirt24.gz nomce noapic quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux24
<4>Found and enabled local APIC!
<6>Initializing CPU#0
<4>Detected 2394.101 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 4744.80 BogoMIPS
<6>Memory: 514804k/524224k available (1386k kernel code, 9032k reserved, 567k data, 144k init, 0k highmem)
<6>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
<6>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>CPU: L1 I cache: 8K
<6>CPU: L2 cache: 128K
<7>CPU: After generic, caps: 0781abfd 00000000 00000000 00000000
<7>CPU: Common caps: 0781abfd 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>Checking for popad bug... OK.
<4>ACPI: IRQ11 SCI: Level Trigger.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: none
<6>CPU: L1 I cache: 8K
<6>CPU: L2 cache: 128K
<7>CPU: After generic, caps: 0781abfd 00000000 00000000 00000000
<7>CPU: Common caps: 0781abfd 00000000 00000000 00000000
<4>CPU0: Intel Pentium II (Klamath) stepping 03
<4>per-CPU timeslice cutoff: 365.57 usecs.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Error: only one processor found.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 2394.1963 MHz.
<4>..... host bus clock speed is 1000.0200 MHz.
<4>cpu: 0, clocks: 10000200, slice: 5000100
<4>CPU0<T0:10000192,T1:4999200,D:892,S:5000100,C:10000200>
<4>Waiting on wait_init_idle (map = 0x0)
<4>All processors have done init_idle
<6>ACPI: Subsystem revision 20040326
<6>PCI: PCI BIOS revision 2.10 entry at 0xfa110, last bus=0
<6>PCI: Using configuration type 1
<4> ACPI-1059: *** Info: There are no GPE blocks defined in the FADT
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12)
<6>PCI: Probing PCI hardware
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
<6>PCI: Using ACPI for IRQ routing
<3>PCI: PIIX3: Enabling Passive Release on 00:01.0
<6>Limiting direct PCI/PCI transfers.
<6>Activating ISA DMA hang workarounds.
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<5>VFS: Disk quotas vdquot_6.5.1
<6>vesafb: framebuffer at 0xf0000000, mapped to 0xe0811000, size 1875k
<6>vesafb: mode is 800x600x16, linelength=1600, pages=3
<6>vesafb: protected mode interface info at a5f3:1f5f
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<4>Console: switching to colour frame buffer device 100x37
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>FDC 0 is a S82078B
<4>RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>PIIX3: IDE controller at PCI slot 00:01.1
<6>PIIX3: chipset revision 0
<6>PIIX3: not 100% native mode: will probe irqs later
<7>PCI: Setting latency timer of device 00:01.1 to 64
<6> ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio
<6> ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
<4>hda: QEMU HARDDISK, ATA DISK drive
<4>hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: attached ide-disk driver.
<6>hda: 8192000 sectors (4194 MB) w/256KiB Cache, CHS=509/255/63
<6>Partition check:
<6> hda: hda1 hda2
<4>ide: late registration of driver.
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>Initializing Cryptographic API
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 32768)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 292k freed
<4>EXT2-fs warning: checktime reached, running e2fsck is recommended
<4>VFS: Mounted root (ext2 filesystem).
<4>hdc: attached ide-scsi driver.
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: QEMU Model: QEMU CD-ROM Rev: 0.9.
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
<4>sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
<6>Uniform CD-ROM driver Revision: 3.12
<6>usb.c: registered new driver usbdevfs
<6>usb.c: registered new driver hub
<6>usb-uhci.c: $Revision: 1.275 $ time 14:05:13 Aug 18 2005
<6>usb-uhci.c: High bandwidth mode enabled
<7>PCI: Setting latency timer of device 00:01.2 to 64
<6>usb-uhci.c: USB UHCI at I/O 0xc020, IRQ 9
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 1
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
<6>Initializing USB Mass Storage driver...
<6>usb.c: registered new driver usb-storage
<6>USB Mass Storage support registered.
<6>hub.c: new USB device 00:01.2-2, assigned address 2
<4>usb.c: USB device 2 (vend/prod 0x627/0x1) is not claimed by any active driver.
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<7>ISO 9660 Extensions: RRIP_1991A
<4>cloop: Initializing cloop v2.01
<6>cloop: loaded (max 128 devices)
<4>cloop: /cdrom/KNOPPIX/KNOPPIX: 1961 blocks, 65536 bytes/block, largest block is 65552 bytes.
<7>ISO 9660 Extensions: RRIP_1991A
<6>Freeing unused kernel memory: 144k freed
<6>Real Time Clock Driver v1.10f
<6>Linux Kernel Card Services 3.1.22
<6> options: [pci] [cardbus] [pm]
<6>Intel ISA PCIC probe: not found.
<6>Databook TCIC-2 PCMCIA probe: not found.
<4>usbdevfs: remount parameter error
<6>usb.c: registered new driver hiddev
<6>usb.c: registered new driver hid
<6>input: USB HID v0.01 Pointer [QEMU 0.9.0 QEMU USB Tablet] on usb1:2.0
<6>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
<6>hid-core.c: USB HID support drivers
<6>mice: PS/2 mouse device common for all mice
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16450
<6>parport0: PC-style at 0x378 [PCSPP,EPP]
<6>ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
<6> http://www.scyld.com/network/ne2k-pci.html
<4>eth0: RealTek RTL-8029 found at 0xc100, IRQ 11, 52:54:00:12:34:56.
<6>Journalled Block Device driver loaded
<3>VFS: Can't find ext3 filesystem on dev ide0(3,2).
<4>VFS: Can't find ext2 filesystem on dev ide0(3,2).
<4>Unable to identify CD-ROM format.
<4>sh-2021: reiserfs_read_super: can not find reiserfs on ide0(3,2)
<4>FAT: bogus logical sector size 0
<4>VFS: Can't find a valid FAT filesystem on dev 03:02.
<5>NTFS driver v1.1.22 [Flags: R/W MODULE]
<4>Registering unionfs 1.0.14
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<5>apm: overridden by ACPI.