root@Hell webmin # uname -a
FreeBSD Hell.ls.la 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 7 04:42:56 UTC 2006 root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
error: make buildkernel
cc -O2 -pipe -fno-strict-aliasing -march=pentium3 -Werror -D_KERNEL -DKLD_MODULE -nostdinc -I- -I/usr/src/sys/modules/acpi/acpi/../../../contrib/dev/acpica -DHAVE_KERNEL_OPTION_HEADERS -include /usr/obj/usr/src/sys/GENERIC/opt_global.h -I. -I@ -I@/contrib/altq -I@/../include -finline-limit=8000 -fno-common -g -I/usr/obj/usr/src/sys/GENERIC -mno-align-long-strings -mpreferred-stack-boundary=2 -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=c99 -Wsystem-headers -Werror -Wall -Wno-format-y2k -Wno-uninitialized -c /usr/src/sys/modules/acpi/acpi/../../../i386/acpica/acpi_wakeup.c
/usr/src/sys/modules/acpi/acpi/../../../i386/acpica/acpi_wakeup.c: In function `acpi_sleep_machdep':
/usr/src/sys/modules/acpi/acpi/../../../i386/acpica/acpi_wakeup.c:285: error: `acpi_resume_beep' undeclared (first use in this function)
/usr/src/sys/modules/acpi/acpi/../../../i386/acpica/acpi_wakeup.c:285: error: (Each undeclared identifier is reported only once
/usr/src/sys/modules/acpi/acpi/../../../i386/acpica/acpi_wakeup.c:285: error: for each function it appears in.)
*** Error code 1
Stop in /usr/src/sys/modules/acpi/acpi.
*** Error code 1
Stop in /usr/src/sys/modules/acpi.
*** Error code 1
Stop in /usr/src/sys/modules.
*** Error code 1
Stop in /usr/obj/usr/src/sys/GENERIC.
*** Error code 1
---
root@Hell ~ # cat /var/run/dmesg.boot
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May 7 04:42:56 UTC 2006
root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (1002.28-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 805240832 (767 MB)
avail memory = 778506240 (742 MB)
ACPI APIC Table: <VIA694 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f on acpi0
pcib0: could not get PCI interrupt routing table for \\_SB_.PCI0 - AE_BAD_DATA
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: no PRT entry for 0.1.INTA
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
dc0: <82c169 PNIC 10/100BaseTX> port 0xe800-0xe8ff mem 0xdf000000-0xdf0000ff irq 16 at device 20.0 on pci0
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:c0:f0:4e:3d:11
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad0: 39205MB <Maxtor 6E040L0 NAR61590> at ata0-master UDMA66
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
root@Hell ~ #