rendered paste bodydmesg
Linux version 2.4.27-speakup (mlang@lexx) (gcc version 3.3.4 (Debian 1:3.3.4-9)) #1 Thu Aug 19 21:46:14 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ee0000 (usable)
BIOS-e820: 0000000007ee0000 - 0000000007ef8000 (ACPI data)
BIOS-e820: 0000000007ef8000 - 0000000007f00000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
126MB LOWMEM available.
On node 0 totalpages: 32480
zone(0): 4096 pages.
zone(1): 28384 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 AMI ) @ 0x000ff8f0
ACPI: RSDT (v001 GATEWA N0CPP012 0x20010419 AMI 0x00000097) @ 0x07ef0000
ACPI: FADT (v001 GATEWA N0CPP012 0x20010419 AMI 0x00000097) @ 0x07ef1000
ACPI: DBGP (v001 GATEWA AMI 0x20010419 AMI 0x00000097) @ 0x07ef5000
ACPI: DSDT (v001 GATEWA N0CPP012 0x00000009 MSFT 0x0100000c) @ 0x00000000
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hdc=ide-scsi ide=nodma
Found and enabled local APIC!
Initializing CPU#0
Detected 634.462 MHz processor.
Speakup v-2.00 CVS: Wed Apr 14 16:23:30 EDT 2004 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 1264.84 BogoMIPS
Memory: 122340k/129920k available (1092k kernel code, 7192k reserved, 482k data, 96k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 634.4816 MHz.
..... host bus clock speed is 66.7873 MHz.
cpu: 0, clocks: 667873, slice: 333936
CPU0<T0:667872,T1:333936,D:0,S:333936,C:667873>
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfdba1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801AA PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/2410] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3820 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 3820k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
ide_setup: hdc=ide-scsi
ide_setup: ide=nodma : Prevented DMA
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ide: late registration of driver.
hda: ST310014A, ATA DISK drive
hdc: GENERIC DVD DUAL 4XMax, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Journalled Block Device driver loaded
hda: attached ide-disk driver.
hda: 20005650 sectors (10243 MB) w/2048KiB Cache, CHS=19846/16/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 < p5 >
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 441748k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
PCI: Found IRQ 5 for device 01:02.0
tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1.
eth0: ADMtek Comet rev 17 at 0xd000, 00:04:5A:46:62:E0, IRQ 5.
device-mapper: 4.1.1-ioctl (2004-04-07) initialised: dm-devel@redhat.com
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 93M
agpgart: Detected an Intel i810 E Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
i810_rng: RNG not detected
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: GENERIC Model: DVD DUAL 4XMax Rev: 2.17
Type: CD-ROM ANSI SCSI revision: 02
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 22:18:33 Aug 19 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:1f.2
PCI: Sharing IRQ 10 with 01:03.0
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xe880, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1f.2-2, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:1f.2-2.4, assigned address 3
usb.c: USB device 3 (vend/prod 0xd3d/0x1) is not claimed by any active driver.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
i810_rng: RNG not detected
hw_random: RNG not detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.00 Keyboard [USBPS2] on usb1:3.0
input: USB HID v1.00 Mouse [USBPS2] on usb1:3.1
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16)
lp: driver loaded but no devices found