rendered paste body
++VoIPSP++:[0x0728]10/05 21:10:07.301 - TELE(0:1)::SetDevSpecificData(id=65546) called
++VoIPSP++:[0x0728]10/05 21:10:07.362 - TELE(0:1) port seized by application
++VoIPSP++:[0x07d4]10/05 21:10:07.362 - TELE(0:1)::ReleaseCall called
++VoIPSP++:[0x07d4]10/05 21:10:07.362 - TELE(0:1)::PutCommand(106) to H323
++VoIPSP++:[0x07d4]10/05 21:10:07.422 - TELE(0:1)::GetStatus called
++VoIPSP++:[0x0728]10/05 21:10:22.363 - TELE(0:2)::SetDevSpecificData(id=65546) called
++VoIPSP++:[0x0728]10/05 21:10:22.363 - TELE(0:2) port seized by application
++VoIPSP++:[0x07d8]10/05 21:10:22.363 - TELE(0:2)::ReleaseCall called
++VoIPSP++:[0x07d8]10/05 21:10:22.363 - TELE(0:2)::PutCommand(106) to H323
++VoIPSP++:[0x07d8]10/05 21:10:22.423 - TELE(0:2)::GetStatus called
++VoIPSP++:[0x01f4]10/05 21:13:18.276 - BRD(0)::GetDevSpecificData(Id=65537 h323_setting) called
++VoIPSP++:[0x0260]10/05 21:13:21.250 - TELE(0:1)::GetConfig called
++VoIPSP++:[0x05e0]10/05 21:14:34.676 - TELE(0:7) port seized by SP
++VoIPSP++:[0x05e0]10/05 21:14:34.676 - H323Call(0:7):: FastStart Enable
++VoIPSP++:[0x067c]10/05 21:14:34.686 - H323Call(0:7) dest phone = 305
++VoIPSP++:[0x067c]10/05 21:14:34.686 - H323Call(0:7) CALL_RECEIVED. Send ACI_EVT_TELE_CALLPRESENT
++VoIPSP++:[0x067c]10/05 21:14:34.686 - SP::SendEventToAltiConnect(2:7) EventType=1, value=1 called
++VoIPSP++:[0x07ec]10/05 21:14:34.686 - RES(0:7)::EnableAnswerSupervision called: S_OK
++VoIPSP++:[0x07ec]10/05 21:14:34.696 - TELE(0:3)::SetDevSpecificData(id=65546) called
++VoIPSP++:[0x07ec]10/05 21:14:34.696 - TELE(0:3) port seized by application
++VoIPSP++:[0x07dc]10/05 21:14:34.696 - TELE(0:3)::PlaceCall
++VoIPSP++:[0x07dc]10/05 21:14:34.696 - TELE(0:3)::PutCommand(100) to H323
++VoIPSP++:[0x07dc]10/05 21:14:34.746 - TELE(0:3)::DialIPCall called
++VoIPSP++:[0x07dc]10/05 21:14:34.746 - TELE(0:3)::PutCommand(21) to H323
++VoIPSP++:[0x066c]10/05 21:14:34.746 - H323Call(0:3) DIALing gw(216.132.54.145) ph#()
++VoIPSP++:[0x066c]10/05 21:14:34.746 - H323Call(0:3):: FastStart Enable
++VoIPSP++:[0x066c]10/05 21:14:34.766 - H323Call(0:3)::InitFastStartProcedure() is called.
++VoIPSP++:[0x066c]10/05 21:14:34.766 - H323Call(0:3)::CreateRtpSession() G711.
++VoIPSP++:[0x066c]10/05 21:14:34.766 - H323Call(0:3)::use G7111 codec, add G711 LC.
++VoIPSP++:[0x066c]10/05 21:14:34.766 - H323Call(0:3)::Init fast start successfully.
++VoIPSP++:[0x066c]10/05 21:14:35.798 - H323Call(0:3) Rcv Q931 ALERT MESSAGE: Send ACI_EVT_TELE_ALERTED
++VoIPSP++:[0x066c]10/05 21:14:35.798 - SP::SendEventToAltiConnect(2:3) EventType=1, value=7 called
++VoIPSP++:[0x07ec]10/05 21:14:35.798 - TELE(0:7)::Alerted called
++VoIPSP++:[0x07ec]10/05 21:14:35.798 - TELE(0:7)::PutCommand(101) to H323
++VoIPSP++:[0x067c]10/05 21:14:35.798 - H323Call(0:7) ALERTed
++VoIPSP++:[0x07dc]10/05 21:14:56.307 - TELE(0:3)::ReleaseCall called
++VoIPSP++:[0x07dc]10/05 21:14:56.307 - TELE(0:3)::PutCommand(106) to H323
++VoIPSP++:[0x066c]10/05 21:14:56.307 - H323Call(0:3) CMD_DISC (h323state=3)
++VoIPSP++:[0x07ec]10/05 21:14:56.307 - TELE(0:7)::AnswerCall called
++VoIPSP++:[0x07ec]10/05 21:14:56.307 - TELE(0:7)::PutCommand(102) to H323
++VoIPSP++:[0x067c]10/05 21:14:56.307 - H323Call(0:7) ANSWER call from (Mitchel Constantin)
++VoIPSP++:[0x067c]10/05 21:14:56.447 - H323Call(0:7) H245 connection accepted, start capability XChang
++VoIPSP++:[0x066c]10/05 21:14:56.517 - H323Call(0:3) Send IP_DISCONNECT to Triton
++VoIPSP++:[0x066c]10/05 21:14:56.517 - H323_WriteCommand(0,3) >> CommandCode 41
++VoIPSP++:[0x067c]10:05 21:14:56.527 - Could not set audio (4) cap. in audio data type, error = 0xc50e0002.
++VoIPSP++:[0x067c]10:05 21:14:56.527 - H323Call(0:7) H.245 open LC request failed, rc=0xc50e0002
++VoIPSP++:[0x053c]10/05 21:14:56.537 - H323Call(0:3) Receive DSP event: 41
++VoIPSP++:[0x07ec]10/05 21:14:56.567 - RES(0:7)::DisableAnswerSupervision called: S_OK
++VoIPSP++:[0x07ec]10/05 21:14:56.567 - TELE(0:7)::ReleaseCall called
++VoIPSP++:[0x07ec]10/05 21:14:56.567 - TELE(0:7)::PutCommand(106) to H323