rendered paste body[17179569.184000] Linux version 2.6.15-25-386 (root@mepis-party) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Mon Jun 19 00:05:53 EDT 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000004fffc000 (usable)
[17179569.184000] BIOS-e820: 000000004fffc000 - 000000004ffff000 (ACPI data)
[17179569.184000] BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 383MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 327676
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 98300 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ASUS ) @ 0x000f5f50
[17179569.184000] ACPI: RSDT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x4fffc000
[17179569.184000] ACPI: FADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x4fffc0b2
[17179569.184000] ACPI: BOOT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x4fffc030
[17179569.184000] ACPI: MADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x4fffc058
[17179569.184000] ACPI: DSDT (v001 ASUS A7V8X-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:8 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb6 nomce quiet vga=791
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2000.448 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour dummy device 80x25
[17179570.520000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.520000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.572000] Memory: 1294256k/1310704k available (2633k kernel code, 15280k reserved, 929k data, 192k init, 393200k highmem)
[17179570.572000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.652000] Calibrating delay using timer specific routine.. 4004.44 BogoMIPS (lpj=8008886)
[17179570.652000] Security Framework v1.0.0 initialized
[17179570.652000] SELinux: Disabled at boot.
[17179570.652000] Capability LSM initialized
[17179570.652000] Mount-cache hash table entries: 512
[17179570.652000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.652000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.652000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.652000] CPU: L2 Cache: 256K (64 bytes/line)
[17179570.652000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179570.652000] mtrr: v2.0 (20020519)
[17179570.652000] CPU: AMD Athlon(TM) XP 2400+ stepping 01
[17179570.652000] Enabling fast FPU save and restore... done.
[17179570.652000] Enabling unmasked SIMD FPU exception support... done.
[17179570.652000] Checking 'hlt' instruction... OK.
[17179570.668000] ACPI: Looking for DSDT ... not found!
[17179570.672000] ENABLING IO-APIC IRQs
[17179570.672000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.816000] NET: Registered protocol family 16
[17179570.816000] ACPI: bus type pci registered
[17179570.816000] PCI: PCI BIOS revision 2.10 entry at 0xf1990, last bus=1
[17179570.816000] PCI: Using configuration type 1
[17179570.816000] ACPI: Subsystem revision 20051216
[17179570.820000] ACPI: Interpreter enabled
[17179570.820000] ACPI: Using IOAPIC for interrupt routing
[17179570.820000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[17179570.820000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[17179570.820000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12)
[17179570.820000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12)
[17179570.820000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12)
[17179570.820000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
[17179570.824000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179570.824000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.824000] PCI: Probing PCI hardware (bus 00)
[17179570.824000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179570.824000] PCI quirk: region e400-e47f claimed by vt8235 PM
[17179570.824000] PCI quirk: region e800-e80f claimed by vt8235 SMB
[17179570.824000] Boot video device is 0000:01:00.0
[17179570.824000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.828000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179570.832000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.832000] pnp: PnP ACPI init
[17179570.836000] pnp: PnP ACPI: found 14 devices
[17179570.836000] PnPBIOS: Disabled by ACPI PNP
[17179570.836000] SCSI subsystem initialized
[17179570.836000] usbcore: registered new driver usbfs
[17179570.836000] usbcore: registered new driver hub
[17179570.836000] PCI: Using ACPI for IRQ routing
[17179570.836000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.840000] pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
[17179570.840000] pnp: 00:01: ioport range 0xe800-0xe81f could not be reserved
[17179570.840000] pnp: 00:0d: ioport range 0x290-0x297 has been reserved
[17179570.840000] pnp: 00:0d: ioport range 0x370-0x375 has been reserved
[17179570.840000] PCI: Bridge: 0000:00:01.0
[17179570.840000] IO window: disabled.
[17179570.840000] MEM window: dd000000-de7fffff
[17179570.840000] PREFETCH window: dff00000-f7ffffff
[17179570.844000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.844000] Simple Boot Flag at 0x3a set to 0x1
[17179570.844000] Machine check exception polling timer started.
[17179570.844000] audit: initializing netlink socket (disabled)
[17179570.844000] audit(1155286076.844:1): initialized
[17179570.844000] highmem bounce pool size: 64 pages
[17179570.844000] VFS: Disk quotas dquot_6.5.1
[17179570.844000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.844000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[17179570.844000] NTFS driver 2.1.25 [Flags: R/W].
[17179570.844000] Registering unionfs 1.1.2
[17179570.844000] Initializing Cryptographic API
[17179570.844000] io scheduler noop registered
[17179570.844000] io scheduler anticipatory registered
[17179570.844000] io scheduler deadline registered
[17179570.844000] io scheduler cfq registered
[17179570.844000] vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 3072k, total 131072k
[17179570.844000] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[17179570.844000] vesafb: protected mode interface info at c000:e2e0
[17179570.844000] vesafb: scrolling: redraw
[17179570.844000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[17179570.844000] vesafb: Mode is VGA compatible
[17179570.928000] Console: switching to colour frame buffer device 128x48
[17179570.928000] fb0: VESA VGA frame buffer device
[17179570.928000] isapnp: Scanning for PnP cards...
[17179571.236000] isapnp: No Plug & Play device found
[17179571.252000] Non-volatile memory driver v1.2
[17179571.252000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179571.252000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.252000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.256000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179571.256000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.256000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.256000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.256000] loop: loaded (max 8 devices)
[17179571.256000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.256000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.256000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[17179571.256000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[17179571.256000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
[17179571.256000] VP_IDE: chipset revision 6
[17179571.256000] VP_IDE: not 100% native mode: will probe irqs later
[17179571.256000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[17179571.256000] ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:DMA
[17179571.256000] ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
[17179571.256000] Probing IDE interface ide0...
[17179571.676000] hda: Maxtor 6Y200P0, ATA DISK drive
[17179571.956000] hdb: Maxtor 6Y120L0, ATA DISK drive
[17179572.012000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179572.012000] Probing IDE interface ide1...
[17179572.876000] hdc: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive
[17179573.660000] hdd: DVD-RW IDE1008, ATAPI CD/DVD-ROM drive
[17179573.716000] ide1 at 0x170-0x177,0x376 on irq 15
[17179573.716000] hda: max request size: 1024KiB
[17179573.716000] hda: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(133)
[17179573.716000] hda: cache flushes supported
[17179573.716000] hda: hda1
[17179573.724000] hdb: max request size: 128KiB
[17179573.732000] hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179573.732000] hdb: cache flushes supported
[17179573.732000] hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 hdb9 >
[17179573.820000] hdc: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)
[17179573.820000] Uniform CD-ROM driver Revision: 3.20
[17179573.824000] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[17179573.824000] ACPI: bus type scsi registered
[17179573.824000] libata version 1.20 loaded.
[17179573.824000] Driver 'sd' needs updating - please use bus_type methods
[17179573.824000] ieee1394: Initialized config rom entry `ip1394'
[17179573.824000] ieee1394: raw1394: /dev/raw1394 device initialized
[17179573.824000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179573.824000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179573.824000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179573.824000] usbmon: debugfs is not available
[17179573.828000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
[17179573.828000] PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 9
[17179573.828000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[17179573.828000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[17179573.828000] ehci_hcd 0000:00:10.3: irq 169, io mem 0xdc000000
[17179573.828000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179573.828000] hub 1-0:1.0: USB hub found
[17179573.828000] hub 1-0:1.0: 6 ports detected
[17179573.932000] Initializing USB Mass Storage driver...
[17179573.932000] usbcore: registered new driver usb-storage
[17179573.932000] USB Mass Storage support registered.
[17179573.932000] mice: PS/2 mouse device common for all mice
[17179573.932000] NET: Registered protocol family 2
[17179573.960000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.968000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.968000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179573.968000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.968000] TCP: Hash tables configured (established 262144 bind 65536)
[17179573.968000] TCP reno registered
[17179573.968000] ip_tables: (C) 2000-2002 Netfilter core team
[17179574.008000] TCP bic registered
[17179574.008000] NET: Registered protocol family 1
[17179574.008000] NET: Registered protocol family 8
[17179574.008000] NET: Registered protocol family 20
[17179574.008000] Using IPI Shortcut mode
[17179574.008000] ACPI wakeup devices:
[17179574.008000] PCI0 PCI1 USB0 USB1 USB2 SU20 SLAN
[17179574.008000] ACPI: (supports S0 S1 S4 S5)
[17179574.032000] EXT3-fs: mounted filesystem with ordered data mode.
[17179574.032000] VFS: Mounted root (ext3 filesystem) readonly.
[17179574.032000] Freeing unused kernel memory: 192k freed
[17179574.032000] kjournald starting. Commit interval 5 seconds
[17179574.172000] usb 1-3: new high speed USB device using ehci_hcd and address 2
[17179574.304000] hub 1-3:1.0: USB hub found
[17179574.304000] hub 1-3:1.0: 4 ports detected
[17179574.744000] EXT3 FS on hdb6, internal journal
[17179578.592000] Adding 1048784k swap on /dev/hdb1. Priority:1 extents:1 across:1048784k
[17179578.608000] Adding 3140668k swap on /dev/hdb5. Priority:1 extents:1 across:3140668k
[17179578.904000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179578.904000] hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179578.904000] ide: failed opcode was: unknown
[17179578.972000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179578.972000] hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179578.972000] ide: failed opcode was: unknown
[17179579.048000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179579.048000] hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179579.048000] ide: failed opcode was: unknown
[17179579.116000] hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[17179579.116000] hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
[17179579.116000] ide: failed opcode was: unknown
[17179579.116000] hda: DMA disabled
[17179579.164000] ide0: reset: success
[17179579.864000] EXT3 FS on hdb6, internal journal
[17179582.892000] USB Universal Host Controller Interface driver v2.3
[17179582.892000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
[17179582.892000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 9
[17179582.892000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179582.892000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[17179582.892000] uhci_hcd 0000:00:10.0: irq 169, io base 0x0000d400
[17179582.892000] hub 2-0:1.0: USB hub found
[17179582.892000] hub 2-0:1.0: 2 ports detected
[17179582.900000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179582.940000] irda_init()
[17179582.940000] NET: Registered protocol family 23
[17179582.996000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
[17179582.996000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 9
[17179582.996000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179582.996000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[17179582.996000] uhci_hcd 0000:00:10.1: irq 169, io base 0x0000d000
[17179582.996000] hub 3-0:1.0: USB hub found
[17179582.996000] hub 3-0:1.0: 2 ports detected
[17179583.004000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[17179583.004000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179583.004000] PCI: Via IRQ fixup for 0000:00:0a.0, from 11 to 1
[17179583.060000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177] MMIO=[dc800000-dc8007ff] Max Packet=[2048]
[17179583.100000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
[17179583.100000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 9
[17179583.100000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179583.100000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[17179583.100000] uhci_hcd 0000:00:10.2: irq 169, io base 0x0000b800
[17179583.100000] hub 4-0:1.0: USB hub found
[17179583.100000] hub 4-0:1.0: 2 ports detected
[17179583.204000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179583.452000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179583.452000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
[17179583.452000] PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 9
[17179583.452000] eth0: VIA Rhine II at 0x1b000, 00:0e:a6:ae:51:ef, IRQ 185.
[17179583.452000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[17179583.660000] Linux agpgart interface v0.101 (c) Dave Jones
[17179583.672000] Real Time Clock Driver v1.12
[17179583.844000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
[17179583.972000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193
[17179583.972000] PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 1
[17179583.976000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179584.004000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[17179584.008000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179584.040000] input: PC Speaker as /class/input/input2
[17179584.056000] 8139too Fast Ethernet driver 0.9.27
[17179584.060000] Linux video capture interface: v1.00
[17179584.244000] Floppy drive(s): fd0 is 1.44M
[17179584.260000] FDC 0 is a post-1991 82077
[17179584.404000] bttv: driver version 0.9.16 loaded
[17179584.404000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179584.404000] bttv: Bt8xx card found (0).
[17179584.404000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 201
[17179584.404000] bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 201, latency: 32, mmio: 0xdf000000
[17179584.404000] bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003
[17179584.404000] bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
[17179584.404000] bttv0: gpio: en=00000000, out=00000000 in=008677c3 [init]
[17179584.496000] bttv0: Avermedia eeprom[0x4803]: tuner=2 radio:yes remote control:yes
[17179584.496000] bttv0: using tuner=2
[17179584.496000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[17179584.500000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[17179584.500000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[17179584.512000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011060000003f26]
[17179584.524000] codec_read: codec 0 is not valid [0x107e5370]
[17179584.544000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[17179584.556000] codec_read: codec 0 is not valid [0x107e5370]
[17179584.564000] codec_read: codec 0 is not valid [0x107e5370]
[17179584.580000] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
[17179584.580000] tuner 1-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
[17179584.608000] bttv0: registered device video0
[17179584.608000] bttv0: registered device vbi0
[17179584.608000] bttv0: registered device radio0
[17179584.608000] bttv0: PLL: 28636363 => 35468950 .<3>codec_read: codec 0 is not valid [0x107e5370]
[17179584.624000] . ok
[17179584.644000] bttv0: add subdevice "remote0"
[17179584.644000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 209
[17179584.644000] eth1: RealTek RTL8139 at 0xf8848000, 00:40:33:aa:de:ec, IRQ 209
[17179584.644000] eth1: Identified 8139 chip type 'RTL-8139A'
[17179584.848000] bt878: AUDIO driver version 0.0.0 loaded
[17179584.848000] bt878: Bt878 AUDIO function found (0).
[17179584.848000] ACPI: PCI Interrupt 0000:00:0c.1[A] -> GSI 19 (level, low) -> IRQ 201
[17179584.848000] bt878(0): Bt878 (rev 17) at 00:0c.1, irq: 201, latency: 32, memory: 0xde800000
[17179584.932000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179584.968000] parport: PnPBIOS parport detected.
[17179584.968000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179585.048000] parport0: Printer, HEWLETT-PACKARD DESKJET 1120C
[17179585.048000] lp0: using parport0 (interrupt-driven).
[17179586.028000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179586.500000] eth1: link down
[17179586.868000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179586.868000] md: bitmap version 4.39
[17179587.124000] NET: Registered protocol family 17
[17179587.404000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179587.940000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179587.940000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179587.940000] ide: failed opcode was: unknown
[17179587.940000] end_request: I/O error, dev hdc, sector 0
[17179587.940000] Buffer I/O error on device hdc, logical block 0
[17179587.940000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179587.940000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179587.940000] ide: failed opcode was: unknown
[17179587.940000] end_request: I/O error, dev hdc, sector 8
[17179587.940000] Buffer I/O error on device hdc, logical block 1
[17179587.940000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179587.940000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179587.940000] ide: failed opcode was: unknown
[17179587.940000] end_request: I/O error, dev hdc, sector 16
[17179587.940000] Buffer I/O error on device hdc, logical block 2
[17179587.944000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179587.944000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179587.944000] ide: failed opcode was: unknown
[17179587.944000] end_request: I/O error, dev hdc, sector 24
[17179587.944000] Buffer I/O error on device hdc, logical block 3
[17179587.944000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179587.944000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179587.944000] ide: failed opcode was: unknown
[17179587.944000] end_request: I/O error, dev hdc, sector 32
[17179587.944000] Buffer I/O error on device hdc, logical block 4
[17179587.944000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179587.944000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179587.944000] ide: failed opcode was: unknown
[17179587.944000] end_request: I/O error, dev hdc, sector 40
[17179587.944000] Buffer I/O error on device hdc, logical block 5
[17179587.944000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179587.944000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179587.944000] ide: failed opcode was: unknown
[17179587.944000] end_request: I/O error, dev hdc, sector 48
[17179587.944000] Buffer I/O error on device hdc, logical block 6
[17179587.944000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179587.944000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179587.944000] ide: failed opcode was: unknown
[17179587.944000] end_request: I/O error, dev hdc, sector 56
[17179587.944000] Buffer I/O error on device hdc, logical block 7
[17179587.948000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179587.948000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179587.948000] ide: failed opcode was: unknown
[17179587.948000] end_request: I/O error, dev hdc, sector 0
[17179587.948000] Buffer I/O error on device hdc, logical block 0
[17179588.260000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179588.260000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179588.260000] ide: failed opcode was: unknown
[17179588.260000] end_request: I/O error, dev hdc, sector 1345024
[17179588.564000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179588.564000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179588.564000] ide: failed opcode was: unknown
[17179588.564000] end_request: I/O error, dev hdc, sector 0
[17179588.756000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[17179588.756000] hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
[17179588.756000] ide: failed opcode was: unknown
[17179588.756000] end_request: I/O error, dev hdc, sector 0
[17179589.060000] powernow-k8: Processor cpuid 681 not supported
[17179589.212000] ndiswrapper version 1.8 loaded (preempt=yes,smp=no)
[17179589.284000] usbcore: registered new driver ndiswrapper
[17179590.512000] kjournald starting. Commit interval 5 seconds
[17179590.512000] EXT3 FS on hdb7, internal journal
[17179590.512000] EXT3-fs: mounted filesystem with ordered data mode.
[17179591.984000] Netfilter messages via NETLINK v0.30.
[17179592.016000] ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack
[17179593.764000] ACPI: Power Button (FF) [PWRF]
[17179593.764000] ACPI: Power Button (CM) [PWRB]
[17179593.884000] ibm_acpi: ec object not found
[17179593.920000] pcc_acpi: loading...
[17179603.608000] ppdev: user-space parallel port driver
[17179608.560000] powernow-k8: Processor cpuid 681 not supported
[17179608.952000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179608.952000] apm: overridden by ACPI.
[17179665.552000] NET: Registered protocol family 4
[17179665.640000] NET: Registered protocol family 5
[17179752.152000] ABORTED IN=eth0 OUT= MAC=00:0e:a6:ae:51:ef:00:0f:3d:07:bf:fb:08:00 SRC=64.62.136.189 DST=192.168.20.100 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=24545 DF PROTO=TCP SPT=80 DPT=4196 SEQ=1919942853 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[17179752.252000] ABORTED IN=eth0 OUT= MAC=00:0e:a6:ae:51:ef:00:0f:3d:07:bf:fb:08:00 SRC=64.62.136.189 DST=192.168.20.100 LEN=40 TOS=0x00 PREC=0x00 TTL=51 ID=24546 DF PROTO=TCP SPT=80 DPT=4195 SEQ=1924227962 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[17180437.944000] bttv0: IRQ lockup, clearing GPINT from int mask [bits: OFLOW GPINT*]
[17196859.860000] ABORTED IN=eth0 OUT= MAC=00:0e:a6:ae:51:ef:00:0f:3d:07:bf:fb:08:00 SRC=212.204.214.114 DST=192.168.20.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=19041 DF PROTO=TCP SPT=8001 DPT=2587 SEQ=2273720318 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[17196859.912000] ABORTED IN=eth0 OUT= MAC=00:0e:a6:ae:51:ef:00:0f:3d:07:bf:fb:08:00 SRC=212.204.214.114 DST=192.168.20.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=19045 DF PROTO=TCP SPT=8001 DPT=2587 SEQ=2273720374 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[17196896.160000] ABORTED IN=eth0 OUT= MAC=00:0e:a6:ae:51:ef:00:0f:3d:07:bf:fb:08:00 SRC=212.204.214.114 DST=192.168.20.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=37831 DF PROTO=TCP SPT=8001 DPT=2591 SEQ=3131264163 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[17196896.316000] ABORTED IN=eth0 OUT= MAC=00:0e:a6:ae:51:ef:00:0f:3d:07:bf:fb:08:00 SRC=212.204.214.114 DST=192.168.20.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=38015 DF PROTO=TCP SPT=8001 DPT=2591 SEQ=3131264218 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[17196896.352000] ABORTED IN=eth0 OUT= MAC=00:0e:a6:ae:51:ef:00:0f:3d:07:bf:fb:08:00 SRC=212.204.214.114 DST=192.168.20.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=38017 DF PROTO=TCP SPT=8001 DPT=2591 SEQ=3131264219 ACK=0 WINDOW=0 RES=0x00 RST URGP=0
[17200298.472000] bttv0: PLL can sleep, using XTAL (28636363).
[17200472.528000] bttv0: timeout: drop=15 irq=519767/519767, risc=371dc03c, bits: HSYNC OFLOW FDSR
[17200472.544000] bttv0: reset, reinitialize
[17200472.544000] bttv0: PLL can sleep, using XTAL (28636363).