rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-amd64 (Debian 2.6.26-10) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Nov 8 18:25:23 UTC 2008
[ 0.000000] Command line: root=/dev/mapper/mylvm-root_crypt ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007eeb0000 (usable)
[ 0.000000] BIOS-e820: 000000007eeb0000 - 000000007eecc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eecc000 - 000000007ef00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ef00000 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 519856) 1 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] init_memory_mapping
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F68D0, 0024 (r2 LENOVO)
[ 0.000000] ACPI: XSDT 7EEBB74B, 0094 (r1 LENOVO TP-7L 2090 LTP 0)
[ 0.000000] ACPI: FACP 7EEBB800, 00F4 (r3 LENOVO TP-7L 2090 LNVO 1)
[ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080321]
[ 0.000000] ACPI: DSDT 7EEBBC1D, FF05 (r1 LENOVO TP-7L 2090 MSFT 3000000)
[ 0.000000] ACPI: FACS 7EEE4000, 0040
[ 0.000000] ACPI: SSDT 7EEBB9B4, 0269 (r1 LENOVO TP-7L 2090 MSFT 3000000)
[ 0.000000] ACPI: ECDT 7EECBB22, 0052 (r1 LENOVO TP-7L 2090 LNVO 1)
[ 0.000000] ACPI: TCPA 7EECBB74, 0032 (r2 LENOVO TP-7L 2090 LNVO 1)
[ 0.000000] ACPI: APIC 7EECBBA6, 0068 (r1 LENOVO TP-7L 2090 LNVO 1)
[ 0.000000] ACPI: MCFG 7EECBC0E, 003C (r1 LENOVO TP-7L 2090 LNVO 1)
[ 0.000000] ACPI: HPET 7EECBC4A, 0038 (r1 LENOVO TP-7L 2090 LNVO 1)
[ 0.000000] ACPI: SLIC 7EECBDF0, 0176 (r1 LENOVO TP-7L 2090 LTP 0)
[ 0.000000] ACPI: BOOT 7EECBF66, 0028 (r1 LENOVO TP-7L 2090 LTP 1)
[ 0.000000] ACPI: ASF! 7EECBF8E, 0072 (r16 LENOVO TP-7L 2090 PTL 1)
[ 0.000000] ACPI: SSDT 7EEE26D9, 025F (r1 LENOVO TP-7L 2090 INTL 20050513)
[ 0.000000] ACPI: SSDT 7EEE2938, 00A6 (r1 LENOVO TP-7L 2090 INTL 20050513)
[ 0.000000] ACPI: SSDT 7EEE29DE, 04F7 (r1 LENOVO TP-7L 2090 INTL 20050513)
[ 0.000000] ACPI: SSDT 7EEE2ED5, 01D8 (r1 LENOVO TP-7L 2090 INTL 20050513)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007eeb0000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 519856) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007eeb0000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff]
[ 0.000000] bootmap [0000000000011000 - 0000000000020dd7] pages 10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [377f0000-37fefbc5] RAMDISK
[ 0.000000] early res: 4 [9d800-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-bfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 519856
[ 0.000000] On node 0 totalpages: 519757
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1246 pages reserved
[ 0.000000] DMA zone: 2695 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7052 pages used for memmap
[ 0.000000] DMA32 zone: 508708 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:71000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 511403
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/mapper/mylvm-root_crypt ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 2194.574 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2037328k/2079424k available (2226k kernel code, 41700k reserved, 1079k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083878] Calibrating delay using timer specific routine.. 4398.06 BogoMIPS (lpj=8796132)
[ 0.084005] Security Framework initialized
[ 0.084005] SELinux: Disabled at boot.
[ 0.084005] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.085376] Mount-cache hash table entries: 256
[ 0.085827] Initializing cgroup subsys ns
[ 0.085947] Initializing cgroup subsys cpuacct
[ 0.086065] Initializing cgroup subsys devices
[ 0.086219] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.086430] CPU: L2 cache: 4096K
[ 0.086543] CPU 0/0 -> Node 0
[ 0.086657] CPU: Physical Processor ID: 0
[ 0.086765] CPU: Processor Core ID: 0
[ 0.086893] CPU0: Thermal monitoring enabled (TM2)
[ 0.087009] using mwait in idle threads.
[ 0.089535] ACPI: Core revision 20080321
[ 0.180011] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[ 0.180011] Using local APIC timer interrupts.
[ 0.184011] APIC timer calibration result 12469173
[ 0.184011] Detected 12.469 MHz APIC timer.
[ 0.184011] Booting processor 1/1 ip 6000
[ 0.196012] Initializing CPU#1
[ 0.196012] Calibrating delay using timer specific routine.. 4389.26 BogoMIPS (lpj=8778530)
[ 0.196012] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.196012] CPU: L2 cache: 4096K
[ 0.196012] CPU 1/1 -> Node 0
[ 0.196012] CPU: Physical Processor ID: 0
[ 0.196012] CPU: Processor Core ID: 1
[ 0.196012] CPU1: Thermal monitoring enabled (TM2)
[ 0.276017] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[ 0.276017] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.276017] Measured 1270786 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.276017] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.276189] Brought up 2 CPUs
[ 0.276317] Total of 2 processors activated (8787.33 BogoMIPS).
[ 0.276598] CPU0 attaching sched-domain:
[ 0.276604] domain 0: span 0-1
[ 0.276609] groups: 0 1
[ 0.276617] domain 1: span 0-1
[ 0.276621] groups: 0-1
[ 0.276629] CPU1 attaching sched-domain:
[ 0.276633] domain 0: span 0-1
[ 0.276637] groups: 1 0
[ 0.276644] domain 1: span 0-1
[ 0.276648] groups: 0-1
[ 0.284017] net_namespace: 1224 bytes
[ 0.284017] Booting paravirtualized kernel on bare hardware
[ 0.284017] NET: Registered protocol family 16
[ 0.284017] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.284017] ACPI: bus type pci registered
[ 0.284017] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.284017] PCI: MCFG area at f0000000 reserved in E820
[ 0.292018] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.292018] PCI: Using configuration type 1 for base access
[ 0.298934] ACPI: EC: EC description table is found, configuring boot EC
[ 0.316019] ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.320020] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.352022] ACPI: Interpreter enabled
[ 0.352022] ACPI: (supports S0 S3 S4 S5)
[ 0.352022] ACPI: Using IOAPIC for interrupt routing
[ 0.384605] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
[ 0.384605] ACPI: EC: driver started in interrupt mode
[ 0.384605] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.388146] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.388297] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.392606] PCI: Transparent bridge - 0000:00:1e.0
[ 0.392606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.392606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.392985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.393393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.393796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.394197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.394605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.395011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.409052] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.410790] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.416147] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.417876] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.419592] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.421324] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.423041] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.424767] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.424767] ACPI: Power Resource [PUBS] (on)
[ 0.424767] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.437385] pnp: PnP ACPI init
[ 0.437521] ACPI: bus type pnp registered
[ 0.440187] pnp 00:00: parse allocated resources
[ 0.441109] pnp 00:00: add mem 0x0-0x9ffff flags 0x1
[ 0.441109] pnp 00:00: add mem 0xc0000-0xc3fff flags 0x0
[ 0.441109] pnp 00:00: add mem 0xc4000-0xc7fff flags 0x0
[ 0.441109] pnp 00:00: add mem 0xc8000-0xcbfff flags 0x0
[ 0.441109] pnp 00:00: add mem 0xcc000-0xcffff flags 0x0
[ 0.441109] pnp 00:00: add mem 0xd0000-0xd3fff flags 0x0
[ 0.441109] pnp 00:00: add mem 0xd4000-0xd3fff flags 0x10000000
[ 0.441109] pnp 00:00: add mem 0xd8000-0xd7fff flags 0x10000000
[ 0.441109] pnp 00:00: add mem 0xdc000-0xdbfff flags 0x10000000
[ 0.441109] pnp 00:00: add mem 0xe0000-0xe3fff flags 0x0
[ 0.441109] pnp 00:00: add mem 0xe4000-0xe7fff flags 0x0
[ 0.441109] pnp 00:00: add mem 0xe8000-0xebfff flags 0x0
[ 0.441109] pnp 00:00: add mem 0xec000-0xeffff flags 0x0
[ 0.441109] pnp 00:00: add mem 0xf0000-0xfffff flags 0x0
[ 0.441109] pnp 00:00: add mem 0x100000-0x7effffff flags 0x1
[ 0.441109] pnp 00:00: add mem 0xfec00000-0xfed3ffff flags 0x0
[ 0.441109] pnp 00:00: add mem 0xfed4c000-0xffffffff flags 0x0
[ 0.441109] pnp 00:00: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.441109] pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.441109] pnp 00:01: parse allocated resources
[ 0.441109] pnp 00:01: add io 0xcf8-0xcff flags 0x1
[ 0.441109] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.441109] pnp 00:02: parse allocated resources
[ 0.441109] pnp 00:02: add io 0x10-0x1f flags 0x1
[ 0.441109] pnp 00:02: add io 0x90-0x9f flags 0x1
[ 0.441109] pnp 00:02: add io 0x24-0x25 flags 0x1
[ 0.441109] pnp 00:02: add io 0x28-0x29 flags 0x1
[ 0.441109] pnp 00:02: add io 0x2c-0x2d flags 0x1
[ 0.441109] pnp 00:02: add io 0x30-0x31 flags 0x1
[ 0.441109] pnp 00:02: add io 0x34-0x35 flags 0x1
[ 0.441109] pnp 00:02: add io 0x38-0x39 flags 0x1
[ 0.441109] pnp 00:02: add io 0x3c-0x3d flags 0x1
[ 0.441109] pnp 00:02: add io 0xa4-0xa5 flags 0x1
[ 0.441109] pnp 00:02: add io 0xa8-0xa9 flags 0x1
[ 0.441109] pnp 00:02: add io 0xac-0xad flags 0x1
[ 0.441109] pnp 00:02: add io 0xb0-0xb5 flags 0x1
[ 0.441109] pnp 00:02: add io 0xb8-0xb9 flags 0x1
[ 0.441109] pnp 00:02: add io 0xbc-0xbd flags 0x1
[ 0.441109] pnp 00:02: add io 0x50-0x53 flags 0x1
[ 0.441109] pnp 00:02: add io 0x72-0x77 flags 0x1
[ 0.441109] pnp 00:02: add io 0x164e-0x164f flags 0x1
[ 0.441109] pnp 00:02: add io 0x2e-0x2f flags 0x1
[ 0.441109] pnp 00:02: add io 0x1000-0x107f flags 0x1
[ 0.441109] pnp 00:02: add io 0x1180-0x11bf flags 0x1
[ 0.441109] pnp 00:02: add io 0x800-0x80f flags 0x1
[ 0.441109] pnp 00:02: add io 0x15e0-0x15ef flags 0x1
[ 0.441109] pnp 00:02: add io 0x1600-0x165f flags 0x1
[ 0.441109] pnp 00:02: add mem 0xf0000000-0xf3ffffff flags 0x1
[ 0.441109] pnp 00:02: add mem 0xfed1c000-0xfed1ffff flags 0x1
[ 0.441109] pnp 00:02: add mem 0xfed14000-0xfed17fff flags 0x1
[ 0.441109] pnp 00:02: add mem 0xfed18000-0xfed18fff flags 0x1
[ 0.441109] pnp 00:02: add mem 0xfed19000-0xfed19fff flags 0x1
[ 0.441109] pnp 00:02: add mem 0xfed45000-0xfed4bfff flags 0x1
[ 0.441109] pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.441109] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.441109] pnp 00:03: parse allocated resources
[ 0.441109] pnp 00:03: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.441109] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.441109] pnp 00:04: parse allocated resources
[ 0.441109] pnp 00:04: add io 0x0-0xf flags 0x1
[ 0.441109] pnp 00:04: add io 0x80-0x8f flags 0x1
[ 0.441109] pnp 00:04: add io 0xc0-0xdf flags 0x1
[ 0.441109] pnp 00:04: add dma 4 flags 0x5
[ 0.441109] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.441109] pnp 00:05: parse allocated resources
[ 0.441109] pnp 00:05: add io 0x61-0x61 flags 0x1
[ 0.441109] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.441109] pnp 00:06: parse allocated resources
[ 0.441109] pnp 00:06: add io 0xf0-0xf0 flags 0x1
[ 0.441109] pnp 00:06: add irq 13 flags 0x1
[ 0.441109] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.441109] pnp 00:07: parse allocated resources
[ 0.441109] pnp 00:07: add io 0x70-0x71 flags 0x1
[ 0.441109] pnp 00:07: add irq 8 flags 0x1
[ 0.441109] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.441109] pnp 00:08: parse allocated resources
[ 0.441109] pnp 00:08: add io 0x60-0x60 flags 0x1
[ 0.441109] pnp 00:08: add io 0x64-0x64 flags 0x1
[ 0.441109] pnp 00:08: add irq 1 flags 0x1
[ 0.441109] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.441109] pnp 00:09: parse allocated resources
[ 0.441109] pnp 00:09: add irq 12 flags 0x1
[ 0.441109] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.445091] pnp 00:0a: parse allocated resources
[ 0.445132] pnp 00:0a: add mem 0xfed40000-0xfed44fff flags 0x1
[ 0.448491] pnp 00:0a: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
[ 0.448729] pnp: PnP ACPI: found 11 devices
[ 0.448729] ACPI: ACPI bus type pnp unregistered
[ 0.448729] usbcore: registered new interface driver usbfs
[ 0.452614] usbcore: registered new interface driver hub
[ 0.452614] usbcore: registered new device driver usb
[ 0.452617] PCI: Using ACPI for IRQ routing
[ 0.460679] PCI-GART: No AMD northbridge found.
[ 0.460819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.461357] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.464615] ACPI: RTC can wake from S4
[ 0.468625] Switched to high resolution mode on CPU 0
[ 0.471858] Switched to high resolution mode on CPU 1
[ 0.479850] pnp: the driver 'system' has been registered
[ 0.479871] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.480006] system 00:00: iomem range 0xc0000-0xc3fff has been reserved
[ 0.480137] system 00:00: iomem range 0xc4000-0xc7fff has been reserved
[ 0.480268] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.480401] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 0.480532] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.480665] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.480797] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.480928] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.481059] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.481192] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.481324] system 00:00: iomem range 0x100000-0x7effffff could not be reserved
[ 0.481472] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[ 0.481598] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
[ 0.481598] system 00:00: driver attached
[ 0.481598] system 00:02: ioport range 0x164e-0x164f has been reserved
[ 0.481598] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.481598] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.481598] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.481598] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.481598] system 00:02: ioport range 0x1600-0x165f could not be reserved
[ 0.481598] system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 0.481598] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.481752] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 0.481752] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.481752] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.481752] system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
[ 0.481752] system 00:02: driver attached
[ 0.485606] PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
[ 0.485606] PCI: Bridge: 0000:00:01.0
[ 0.485606] IO window: 2000-2fff
[ 0.485606] MEM window: 0xd4000000-0xd6ffffff
[ 0.485606] PREFETCH window: 0x00000000e0000000-0x00000000efffffff
[ 0.485606] PCI: Bridge: 0000:00:1c.0
[ 0.485606] IO window: 3000-3fff
[ 0.485606] MEM window: 0xfc000000-0xfdffffff
[ 0.485606] PREFETCH window: 0x00000000f8000000-0x00000000f80fffff
[ 0.485606] PCI: Bridge: 0000:00:1c.1
[ 0.485606] IO window: 4000-4fff
[ 0.485606] MEM window: 0xdc100000-0xdf2fffff
[ 0.485606] PREFETCH window: 0x00000000dfd00000-0x00000000dfdfffff
[ 0.485606] PCI: Bridge: 0000:00:1c.2
[ 0.485606] IO window: 5000-5fff
[ 0.485606] MEM window: 0xd8000000-0xd9ffffff
[ 0.487889] PREFETCH window: 0x00000000dfa00000-0x00000000dfafffff
[ 0.487889] PCI: Bridge: 0000:00:1c.3
[ 0.487889] IO window: 6000-6fff
[ 0.487889] MEM window: 0xd0000000-0xd1ffffff
[ 0.487889] PREFETCH window: 0x00000000df700000-0x00000000df7fffff
[ 0.487889] PCI: Bridge: 0000:00:1c.4
[ 0.487889] IO window: 7000-7fff
[ 0.487889] MEM window: 0xcc000000-0xcdffffff
[ 0.487909] PREFETCH window: 0x00000000df400000-0x00000000df4fffff
[ 0.488062] PCI: Bus 22, cardbus bridge: 0000:15:00.0
[ 0.488188] IO window: 0x00008000-0x000080ff
[ 0.488322] IO window: 0x00008400-0x000084ff
[ 0.488457] PREFETCH window: 0xf4000000-0xf7ffffff
[ 0.488595] MEM window: 0x80000000-0x83ffffff
[ 0.488729] PCI: Bridge: 0000:00:1e.0
[ 0.488856] IO window: 8000-bfff
[ 0.488993] MEM window: 0xf8100000-0xfbffffff
[ 0.489127] PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
[ 0.489296] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.489546] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.489617] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 0.489871] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.489943] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 0.490198] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.490269] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 0.490527] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.490599] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 0.491886] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.491886] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20
[ 0.491886] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.491886] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.491886] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.491886] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.491886] PCI: Setting latency timer of device 0000:15:00.0 to 64
[ 0.491886] NET: Registered protocol family 2
[ 0.532111] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.533896] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.537428] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.538644] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.538779] TCP reno registered
[ 0.548058] NET: Registered protocol family 1
[ 0.548419] checking if image is initramfs... it is
[ 2.241192] Freeing initrd memory: 8190k freed
[ 2.251854] Simple Boot Flag at 0x35 set to 0x1
[ 2.251876] audit: initializing netlink socket (disabled)
[ 2.251876] type=2000 audit(1227816421.240:1): initialized
[ 2.251876] Total HugeTLB memory allocated, 0
[ 2.255852] VFS: Disk quotas dquot_6.5.1
[ 2.255852] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.255852] msgmni has been set to 3995
[ 2.255852] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.255852] io scheduler noop registered
[ 2.255852] io scheduler anticipatory registered
[ 2.255852] io scheduler deadline registered
[ 2.255852] io scheduler cfq registered (default)
[ 2.255852] pci 0000:01:00.0: Boot video device
[ 2.255852] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 2.255852] assign_interrupt_mode Found MSI capability
[ 2.255852] Allocate Port Service[0000:00:01.0:pcie00]
[ 2.255852] Allocate Port Service[0000:00:01.0:pcie02]
[ 2.255852] Allocate Port Service[0000:00:01.0:pcie03]
[ 2.257713] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 2.257713] assign_interrupt_mode Found MSI capability
[ 2.257713] Allocate Port Service[0000:00:1c.0:pcie00]
[ 2.257713] Allocate Port Service[0000:00:1c.0:pcie02]
[ 2.257713] Allocate Port Service[0000:00:1c.0:pcie03]
[ 2.257713] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 2.257818] assign_interrupt_mode Found MSI capability
[ 2.258083] Allocate Port Service[0000:00:1c.1:pcie00]
[ 2.260162] Allocate Port Service[0000:00:1c.1:pcie02]
[ 2.261600] Allocate Port Service[0000:00:1c.1:pcie03]
[ 2.261600] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 2.261600] assign_interrupt_mode Found MSI capability
[ 2.261600] Allocate Port Service[0000:00:1c.2:pcie00]
[ 2.261600] Allocate Port Service[0000:00:1c.2:pcie02]
[ 2.261600] Allocate Port Service[0000:00:1c.2:pcie03]
[ 2.261600] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 2.261600] assign_interrupt_mode Found MSI capability
[ 2.261600] Allocate Port Service[0000:00:1c.3:pcie00]
[ 2.261600] Allocate Port Service[0000:00:1c.3:pcie02]
[ 2.261600] Allocate Port Service[0000:00:1c.3:pcie03]
[ 2.261600] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 2.261600] assign_interrupt_mode Found MSI capability
[ 2.261872] Allocate Port Service[0000:00:1c.4:pcie00]
[ 2.261872] Allocate Port Service[0000:00:1c.4:pcie02]
[ 2.261872] Allocate Port Service[0000:00:1c.4:pcie03]
[ 2.269600] hpet_resources: 0xfed00000 is busy
[ 2.269600] Linux agpgart interface v0.103
[ 2.269600] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 2.269670] pnp: the driver 'serial' has been registered
[ 2.273621] brd: module loaded
[ 2.273621] input: Macintosh mouse button emulation as /class/input/input0
[ 2.273621] pnp: the driver 'i8042 kbd' has been registered
[ 2.273621] i8042 kbd 00:08: driver attached
[ 2.273621] pnp: the driver 'i8042 aux' has been registered
[ 2.273684] i8042 aux 00:09: driver attached
[ 2.276026] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 2.284790] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.284931] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.313527] mice: PS/2 mouse device common for all mice
[ 2.313527] pnp: the driver 'rtc_cmos' has been registered
[ 2.313527] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.313527] rtc0: alarms up to one month, y3k
[ 2.313527] rtc_cmos 00:07: driver attached
[ 2.313527] cpuidle: using governor ladder
[ 2.313527] cpuidle: using governor menu
[ 2.313527] No iBFT detected.
[ 2.313527] TCP cubic registered
[ 2.313527] NET: Registered protocol family 17
[ 2.313527] registered taskstats version 1
[ 2.313527] rtc_cmos 00:07: setting system clock to 2008-11-27 20:07:01 UTC (1227816421)
[ 2.313527] Freeing unused kernel memory: 392k freed
[ 2.321535] input: AT Translated Set 2 keyboard as /class/input/input1
[ 2.525957] ACPI: SSDT 7EEE1B32, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513)
[ 2.526567] ACPI: SSDT 7EEE1E7B, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513)
[ 2.537956] Monitor-Mwait will be used to enter C-1 state
[ 2.537956] Monitor-Mwait will be used to enter C-2 state
[ 2.537956] Monitor-Mwait will be used to enter C-3 state
[ 2.537956] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.537956] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.537956] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.538072] ACPI: SSDT 7EEE1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513)
[ 2.541957] ACPI: SSDT 7EEE1DF6, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513)
[ 2.546272] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.546272] ACPI: ACPI0007:01 is registered as cooling_device1
[ 2.546272] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.554143] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 2.556693] ACPI: Thermal Zone [THM0] (38 C)
[ 2.559797] ACPI: LNXTHERM:02 is registered as thermal_zone1
[ 2.559797] ACPI: Thermal Zone [THM1] (35 C)
[ 2.992003] ACPI: ACPI Dock Station Driver
[ 3.220374] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
[ 3.220511] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.220750] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 3.221020] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 3.233559] USB Universal Host Controller Interface driver v3.0
[ 3.434393] eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:25:18:4d:e6
[ 3.434393] eth0: Intel(R) PRO/1000 Network Connection
[ 3.434393] eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
[ 3.435637] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 3.435637] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 3.435637] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.439934] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.440144] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 3.440455] usb usb1: configuration #1 chosen from 1 choice
[ 3.440646] hub 1-0:1.0: USB hub found
[ 3.440779] hub 1-0:1.0: 2 ports detected
[ 3.446206] SCSI subsystem initialized
[ 3.498308] libata version 3.00 loaded.
[ 3.498308] sdhci: Secure Digital Host Controller Interface driver
[ 3.498308] sdhci: Copyright(c) Pierre Ossman
[ 3.502313] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 3.502313] ricoh-mmc: Copyright(c) Philip Langdale
[ 3.546828] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.546970] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.547118] usb usb1: Product: UHCI Host Controller
[ 3.547248] usb usb1: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 3.547380] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.550574] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 3.550574] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 3.550574] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.550574] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.550574] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 3.550574] usb usb2: configuration #1 chosen from 1 choice
[ 3.550574] hub 2-0:1.0: USB hub found
[ 3.550574] hub 2-0:1.0: 2 ports detected
[ 3.654794] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.654938] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.655093] usb usb2: Product: UHCI Host Controller
[ 3.655228] usb usb2: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 3.655364] usb usb2: SerialNumber: 0000:00:1a.1
[ 3.658569] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
[ 3.658569] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 3.658569] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.658569] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 3.662574] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 3.662574] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
[ 3.678615] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.678892] usb usb3: configuration #1 chosen from 1 choice
[ 3.679078] hub 3-0:1.0: USB hub found
[ 3.679220] hub 3-0:1.0: 4 ports detected
[ 3.782777] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.782840] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.782840] usb usb3: Product: EHCI Host Controller
[ 3.782840] usb usb3: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 3.782840] usb usb3: SerialNumber: 0000:00:1a.7
[ 3.782840] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.782840] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.782840] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.782840] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.782840] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[ 3.782840] usb usb4: configuration #1 chosen from 1 choice
[ 3.782840] hub 4-0:1.0: USB hub found
[ 3.782840] hub 4-0:1.0: 2 ports detected
[ 3.883103] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.883241] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.883384] usb usb4: Product: UHCI Host Controller
[ 3.883512] usb usb4: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 3.883640] usb usb4: SerialNumber: 0000:00:1d.0
[ 3.883953] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 3.884215] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.884225] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.884464] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 3.884673] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
[ 3.884976] usb usb5: configuration #1 chosen from 1 choice
[ 3.885167] hub 5-0:1.0: USB hub found
[ 3.885302] hub 5-0:1.0: 2 ports detected
[ 3.987109] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.987247] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.987390] usb usb5: Product: UHCI Host Controller
[ 3.987515] usb usb5: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 3.987644] usb usb5: SerialNumber: 0000:00:1d.1
[ 3.987958] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.988222] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.988231] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.988468] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 3.988682] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
[ 3.988983] usb usb6: configuration #1 chosen from 1 choice
[ 3.989170] hub 6-0:1.0: USB hub found
[ 3.989306] hub 6-0:1.0: 2 ports detected
[ 4.033222] Clocksource tsc unstable (delta = -288138182 ns)
[ 4.091128] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.091268] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.091411] usb usb6: Product: UHCI Host Controller
[ 4.091534] usb usb6: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 4.091661] usb usb6: SerialNumber: 0000:00:1d.2
[ 4.092892] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
[ 4.093170] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.093180] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.093429] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 4.098622] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.098622] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.098622] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
[ 4.110933] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.111259] usb usb7: configuration #1 chosen from 1 choice
[ 4.111455] hub 7-0:1.0: USB hub found
[ 4.111589] hub 7-0:1.0: 6 ports detected
[ 4.216093] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.216231] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.216376] usb usb7: Product: EHCI Host Controller
[ 4.216502] usb usb7: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 4.216630] usb usb7: SerialNumber: 0000:00:1d.7
[ 4.221425] ahci 0000:00:1f.2: version 3.0
[ 4.221491] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
[ 4.225201] udev: renamed network interface eth0 to eth1
[ 4.393117] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 4.571755] usb 1-2: configuration #1 chosen from 1 choice
[ 4.573345] usb 1-2: New USB device found, idVendor=0483, idProduct=2016
[ 4.573345] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.573345] usb 1-2: Product: Biometric Coprocessor
[ 4.573345] usb 1-2: Manufacturer: STMicroelectronics
[ 5.229552] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
[ 5.229710] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 5.229860] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.233559] scsi0 : ahci
[ 5.233544] scsi1 : ahci
[ 5.233544] scsi2 : ahci
[ 5.233544] ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 1273
[ 5.233544] ata2: DUMMY
[ 5.233544] ata3: DUMMY
[ 5.553580] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.555495] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 5.555503] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 5.555733] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 5.555733] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 5.556649] ata1.00: ATA-7: HITACHI HTS541616J9SA00, SB4IC7UP, max UDMA/100
[ 5.556649] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.561793] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 5.561793] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 5.561934] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 5.561934] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 5.562796] ata1.00: configured for UDMA/100
[ 5.577951] ata1.00: configured for UDMA/100
[ 5.577951] ata1: EH complete
[ 5.577951] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54161 SB4I PQ: 0 ANSI: 5
[ 5.578114] sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21)
[ 5.578114] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 5.581440] mmc0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 5.581594] PCI: Setting latency timer of device 0000:15:00.2 to 64
[ 5.582963] mmc0: SDHCI at 0xf8101800 irq 18 DMA
[ 5.592499] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 5.592760] PCI: Setting latency timer of device 0000:15:00.1 to 64
[ 5.646031] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 5.654367] Uniform Multi-Platform E-IDE driver
[ 5.654367] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 5.659517] ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
[ 5.659517] ricoh-mmc: Controller is now disabled.
[ 5.663655] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
[ 5.663852] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
[ 5.664117] ICH8M: not 100% native mode: will probe irqs later
[ 5.664264] ICH8M: IDE port disabled
[ 5.664399] ide0: BM-DMA at 0x1830-0x1837
[ 5.664534] Probing IDE interface ide0...
[ 5.702359] Driver 'sd' needs updating - please use bus_type methods
[ 5.702675] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 5.702850] sd 0:0:0:0: [sda] Write Protect is off
[ 5.702982] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.703049] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.703329] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 5.703496] sd 0:0:0:0: [sda] Write Protect is off
[ 5.703625] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.703691] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.703839] sda: sda1 sda2 sda3
[ 6.108080] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.405882] hda: HL-DT-ST DVDRAM GSA-U10N, ATAPI CD/DVD-ROM drive
[ 6.739769] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 6.742337] hda: UDMA/33 mode selected
[ 6.742942] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.781547] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 6.781547] Uniform CD-ROM driver Revision: 3.20
[ 6.919681] device-mapper: uevent: version 1.0.3
[ 6.919681] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 6.936483] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00016c2000345905]
[ 67.096333] ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
[ 67.096333] ReiserFS: dm-3: using ordered data mode
[ 67.105258] ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 67.106761] ReiserFS: dm-3: checking transaction log (dm-3)
[ 67.174697] ReiserFS: dm-3: Using r5 hash to sort names
[ 70.983637] udevd version 125 started
[ 71.965541] Non-volatile memory driver v1.2
[ 72.439529] thinkpad_acpi: ThinkPad ACPI Extras v0.20
[ 72.439666] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 72.439791] thinkpad_acpi: ThinkPad BIOS 7LETA9WW (2.09 ), EC 7KHT24WW-1.08
[ 72.439921] thinkpad_acpi: Lenovo ThinkPad T61, model 64608SG
[ 72.439988] thinkpad_acpi: radio switch found; radios are enabled
[ 72.439988] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 72.439988] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 72.448174] Registered led device: tpacpi::thinklight
[ 72.448266] Registered led device: tpacpi::power
[ 72.448430] Registered led device: tpacpi:orange:batt
[ 72.448605] Registered led device: tpacpi:green:batt
[ 72.448769] Registered led device: tpacpi::dock_active
[ 72.448928] Registered led device: tpacpi::bay_active
[ 72.449096] Registered led device: tpacpi::dock_batt
[ 72.451374] Registered led device: tpacpi::unknown_led
[ 72.452098] Registered led device: tpacpi::standby
[ 72.483991] thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode
[ 72.483991] thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
[ 72.484400] input: ThinkPad Extra Buttons as /class/input/input2
[ 72.591829] input: Power Button (FF) as /class/input/input3
[ 72.643091] ACPI: Power Button (FF) [PWRF]
[ 72.643347] input: Lid Switch as /class/input/input4
[ 72.669365] ACPI: Lid Switch [LID]
[ 72.669365] input: Sleep Button (CM) as /class/input/input5
[ 72.715151] ACPI: Sleep Button (CM) [SLPB]
[ 72.918187] ACPI: WMI: Mapper loaded
[ 73.271593] ACPI: device:03 is registered as cooling_device2
[ 73.272184] input: Video Bus as /class/input/input6
[ 73.316158] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
[ 73.316297] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
[ 73.316487] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
[ 73.326290] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 73.328996] ACPI: device:08 is registered as cooling_device3
[ 73.329581] input: Video Bus as /class/input/input7
[ 73.370305] ACPI: AC Adapter [AC] (off-line)
[ 73.389350] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 73.549228] ACPI: Battery Slot [BAT0] (battery present)
[ 73.982156] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 73.982170] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
[ 73.982356] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 74.251797] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
[ 74.306128] input: PC Speaker as /class/input/input8
[ 74.493893] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
[ 74.620464] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
[ 74.620601] Socket status: 30000006
[ 74.620727] pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
[ 74.620859] pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
[ 74.620987] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
[ 74.750877] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26ks
[ 74.751042] iwl4965: Copyright(c) 2003-2008 Intel Corporation
[ 74.751362] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 74.751420] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 74.751420] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 74.802322] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 74.811864] phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 74.981159] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
[ 74.981433] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[ 74.981608] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 75.194112] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 75.194112] input: 4965AGN as /class/input/input9
[ 75.648272] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
[ 75.648430] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 75.685997] input: SynPS/2 Synaptics TouchPad as /class/input/input10
[ 78.942856] loop: module loaded
[ 81.172567] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 81.398325] input: TPPS/2 IBM TrackPoint as /class/input/input11
[ 90.838127] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[ 90.838292] ReiserFS: sda1: using ordered data mode
[ 90.851758] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 90.852749] ReiserFS: sda1: checking transaction log (sda1)
[ 90.863066] ReiserFS: sda1: Using r5 hash to sort names
[ 90.878277] ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
[ 90.878330] ReiserFS: dm-4: using ordered data mode
[ 90.889931] ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 90.890468] ReiserFS: dm-4: checking transaction log (dm-4)
[ 90.983089] ReiserFS: dm-4: Using r5 hash to sort names
[ 91.115263] Adding 2097144k swap on /dev/mapper/mylvm-swap_crypt. Priority:-1 extents:1 across:2097144k
[ 94.013628] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 94.014752] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 40100102, writing 40100106)
[ 94.015379] firmware: requesting iwlwifi-4965-1.ucode
[ 94.275322] Registered led device: iwl-phy0:radio
[ 94.275322] Registered led device: iwl-phy0:assoc
[ 94.275322] Registered led device: iwl-phy0:RX
[ 94.275322] Registered led device: iwl-phy0:TX
[ 97.663061] wlan0: Initial auth_alg=0
[ 97.669041] wlan0: authenticate with AP 00:1f:3f:12:6e:27
[ 97.671622] wlan0: RX authentication from 00:1f:3f:12:6e:27 (alg=0 transaction=2 status=0)
[ 97.671622] wlan0: authenticated
[ 97.671622] wlan0: associate with AP 00:1f:3f:12:6e:27
[ 97.676904] wlan0: RX AssocResp from 00:1f:3f:12:6e:27 (capab=0x411 status=0 aid=1)
[ 97.676904] wlan0: associated
[ 103.375905] NET: Registered protocol family 10
[ 103.375905] lo: Disabled Privacy Extensions
[ 108.554296] Monitor-Mwait will be used to enter C-3 state
[ 114.356669] wlan0: no IPv6 routers present
[ 114.926711] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 118.410469] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 123.348618] [drm] Initialized drm 1.1.0 20060810
[ 123.482035] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 123.482035] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 123.482035] [drm] Detected an NV50 generation card (0x086900a2)
[ 123.482035] [drm] Initialized nouveau 0.0.11 libdrm-2.4.1-2-g930c0e7cf4f4776f7 on minor 0
[ 124.556776] [drm:nouveau_graph_trapped_channel] *ERROR* AIII, invalid/inactive channel id 128
[ 124.556776] [drm] PGRAPH_ERROR - nSource: PROTECTION_ERROR, nStatus:
[ 124.556776] [drm] PGRAPH_ERROR - Ch -1/0 Class 0x0000 Mthd 0x0000 Data 0x00000000:0x00000000
[ 124.556776] [drm] Allocating FIFO number 1
[ 124.583414] [drm] nouveau_fifo_alloc: initialised FIFO 1
[ 124.584775] [drm] Allocating FIFO number 2
[ 124.596856] [drm] nouveau_fifo_alloc: initialised FIFO 2
[ 448.299066] CE: hpet increasing min_delta_ns to 15000 nsec