rendered paste body00000000fed18000 size: 0000000000002000 end: 00000000fed1a000 type: 2
copy_e820_map() start: 00000000fed1c000 size: 0000000000004000 end: 00000000fed20000 type: 2
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
copy_e820_map() start: 00000000ffe00000 size: 0000000000200000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007bb74000 (usable)
BIOS-e820: 000000007bb74000 - 000000007bbbf000 (reserved)
BIOS-e820: 000000007bbbf000 - 000000007bc83000 (usable)
BIOS-e820: 000000007bc83000 - 000000007bcbf000 (ACPI NVS)
BIOS-e820: 000000007bcbf000 - 000000007bcec000 (usable)
BIOS-e820: 000000007bcec000 - 000000007bcff000 (ACPI data)
BIOS-e820: 000000007bcff000 - 000000007bd00000 (usable)
BIOS-e820: 000000007bd00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
1085MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 507136) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 507136
early_node_map[1] active PFN ranges
0: 0 -> 507136
On node 0 totalpages: 507136
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2170 pages used for memmap
HighMem zone: 275590 pages, LIFO batch:31
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 ACRSYS)
ACPI: XSDT 7BCFE120, 0064 (r1 ACRSYS ACRPRDCT 1 1000013)
ACPI: FACP 7BCFD000, 00F4 (r4 ACRSYS ACRPRDCT 1 1025 1000013)
ACPI: DSDT 7BCEE000, 91DC (r1 ACRSYS ACRPRDCT 1 1025 1000013)
ACPI: FACS 7BC8F000, 0040
ACPI: HPET 7BCFC000, 0038 (r1 ACRSYS ACRPRDCT 1 1025 1000013)
ACPI: APIC 7BCFB000, 006C (r2 ACRSYS ACRPRDCT 1 1025 1000013)
ACPI: MCFG 7BCFA000, 003C (r1 ACRSYS ACRPRDCT 1 1025 1000013)
ACPI: ASF! 7BCF9000, 00A5 (r32 ACRSYS ACRPRDCT 1 1025 1000013)
ACPI: SLIC 7BCF8000, 0176 (r1 ACRSYS ACRPRDCT 1 1025 1000013)
ACPI: BOOT 7BCED000, 0028 (r1 ACRSYS ACRPRDCT 1 1025 1000013)
ACPI: SSDT 7BCEC000, 0655 (r1 PmRef CpuPm 3000 INTL 20051117)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
Built 1 zonelists. Total pages: 503174
Kernel command line: vga=0x317 initrd=/boot/initrd.gz ramdisk_size=6666 root=/dev/ram0 rw autoexec=kdm BOOT_IMAGE=/boot/vmlinuz
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1995.166 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1999176k/2028544k available (6006k kernel code, 27604k reserved, 1918k data, 388k init, 1110424k highmem)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc08c6000 - 0xc0927000 ( 388 kB)
.data : 0xc06dd85d - 0xc08bd3ac (1918 kB)
.text : 0xc0100000 - 0xc06dd85d (6006 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3993.30 BogoMIPS (lpj=7986603)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 23k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz stepping 0d
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=7980018)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz stepping 0d
Total of 2 processors activated (7983.31 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=21
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: Device [J380] status [0000000a]: functional but not present; setting present
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:01: ioport range 0x164e-0x164f has been reserved
pnp: 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed10000-0xfed13fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
ieee1394: Initialized config rom entry `ip1394'
Time: tsc clocksource has been installed.
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: 5000-5fff
MEM window: 9bc00000-9cbfffff
PREFETCH window: 94800000-957fffff
PCI: Bridge: 0000:00:1c.1
IO window: 4000-4fff
MEM window: 9ab00000-9bbfffff
PREFETCH window: 95800000-967fffff
PCI: Bridge: 0000:00:1c.2
IO window: 3000-3fff
MEM window: 99a00000-9aafffff
PREFETCH window: 96800000-977fffff
PCI: Bridge: 0000:00:1c.4
IO window: 2000-2fff
MEM window: 98900000-999fffff
PREFETCH window: 97800000-987fffff
PCI: Bus 9, cardbus bridge: 0000:08:00.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: a0000000-a3ffffff
MEM window: a4000000-a7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: 92000000-940fffff
PREFETCH window: 90000000-91ffffff
PCI: Enabling device 0000:00:1c.0 (0001 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:08:00.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1907k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.28 [Flags: R/O].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Apr 10 2008 01:09:42) installed
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0x80000000, mapped to 0xf8d00000, using 6144k, total 65472k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 128150 bytes,<6>...found (1024x768, 128042 bytes, v3).
Console: switching to colour frame buffer device 107x34
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
set_level status: 0
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
set_level status: 0
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
ACPI: SSDT 7BB7DC18, 0265 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
ACPI: SSDT 7BB7B598, 0537 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7BB7CE18, 01CF (r1 PmRef ApIst 3000 INTL 20051117)
ACPI: SSDT 7BB7DF18, 008D (r1 PmRef ApCst 3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
Time: hpet clocksource has been installed.
ACPI: Thermal Zone [TZ01] (47 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Clocksource tsc unstable (delta = -110731470 ns)
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 6666K size 1024 blocksize
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
input: Macintosh mouse button emulation as /class/input/input4
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2423]-mh3)
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.1.11
Copyright(c) 2004-2006 Emulex. All rights reserved.
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.3.1 (January 23, 2007)
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
st: Version 20070203, fixed bufsize 32768, s/g segs 256
ahci 0000:00:1f.2: version 2.1
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x3) don't match
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xf948e100 ctl 0x00000000 bmdma 0x00000000 irq 20
ata2: SATA max UDMA/133 cmd 0xf948e180 ctl 0x00000000 bmdma 0x00000000 irq 20
scsi2 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HTS542512K9SA00, BB2OC31P, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi3 : ahci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI, max UDMA/100
ata2.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BB2O PQ: 0 ANSI: 5
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: Attached scsi disk sda
scsi 3:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6A11 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT FC Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1a.7[D] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 21, io mem 0x9cc05c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 22, io mem 0x9cc05800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 19, io base 0x000060e0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 22, io base 0x000060a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[D] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00006060
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006040
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
input: AT Translated Set 2 keyboard as /class/input/input5
raid6: int32x1 791 MB/s
raid6: int32x2 765 MB/s
raid6: int32x4 619 MB/s
raid6: int32x8 513 MB/s
raid6: mmxx1 2556 MB/s
raid6: mmxx2 2926 MB/s
raid6: sse1x1 1638 MB/s
raid6: sse1x2 2839 MB/s
raid6: sse2x1 3231 MB/s
raid6: sse2x2 5516 MB/s
raid6: using algorithm sse2x2 (5516 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 7264.000 MB/sec
raid5: using function: pIII_sse (7264.000 MB/sec)
md: multipath personality registered for level -4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 388k freed
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
aufs 20070618
fuse init (API version 7.8)
attempt to access beyond end of device
loop0: rw=0, want=492, limit=488
UDF-fs: No VRS found
(1313,1):ocfs2_fill_super:561 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/loop0
GFS2: gfs2 mount does not exist
Yenta: CardBus bridge found at 0000:08:00.0 [1025:013b]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c
pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
cs: IO port probe 0x1000-0x1fff: clean.
pcmcia: parent PCI bridge Memory window: 0x92000000 - 0x940fffff
pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x91ffffff
MINIX-fs: blocksize too small for device
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
MINIX-fs: blocksize too small for device
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
UDF-fs: No VRS found
(2045,1):ocfs2_fill_super:561 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/loop1
GFS2: gfs2 mount does not exist
attempt to access beyond end of device
loop2: rw=0, want=24, limit=8
ReiserFS: loop2: warning: sh-2006: read_super_block: bread failed (dev loop2, block 2, size 4096)
attempt to access beyond end of device
loop2: rw=0, want=136, limit=8
ReiserFS: loop2: warning: sh-2006: read_super_block: bread failed (dev loop2, block 16, size 4096)
attempt to access beyond end of device
loop2: rw=0, want=66, limit=8
isofs_fill_super: bread failed, dev=loop2, iso_blknum=16, block=32
attempt to access beyond end of device
loop2: rw=0, want=68, limit=8
attempt to access beyond end of device
loop2: rw=0, want=1252, limit=8
attempt to access beyond end of device
loop2: rw=0, want=1028, limit=8
UDF-fs: No partition found (1)
attempt to access beyond end of device
loop2: rw=0, want=72, limit=8
attempt to access beyond end of device
loop2: rw=0, want=128, limit=8
(2172,0):ocfs2_sb_probe:463 ERROR: incompatible version: 2.1903388787
(2172,0):ocfs2_sb_probe:476 ERROR: This is an ocfs v1 filesystem which must be upgraded before mounting with ocfs v2
(2172,0):ocfs2_fill_super:561 ERROR: superblock probe failed!
attempt to access beyond end of device
loop2: rw=48, want=136, limit=8
gfs2: error -5 reading superblock
GFS2: Unrecognized block device or mount point /dev/loop2
GFS2: gfs2 mount does not exist
UDF-fs: No VRS found
(2299,0):ocfs2_fill_super:561 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/loop3
GFS2: gfs2 mount does not exist
attempt to access beyond end of device
loop4: rw=0, want=24, limit=8
ReiserFS: loop4: warning: sh-2006: read_super_block: bread failed (dev loop4, block 2, size 4096)
attempt to access beyond end of device
loop4: rw=0, want=136, limit=8
ReiserFS: loop4: warning: sh-2006: read_super_block: bread failed (dev loop4, block 16, size 4096)
attempt to access beyond end of device
loop4: rw=0, want=66, limit=8
isofs_fill_super: bread failed, dev=loop4, iso_blknum=16, block=32
attempt to access beyond end of device
loop4: rw=0, want=68, limit=8
attempt to access beyond end of device
loop4: rw=0, want=1252, limit=8
attempt to access beyond end of device
loop4: rw=0, want=1028, limit=8
UDF-fs: No partition found (1)
attempt to access beyond end of device
loop4: rw=0, want=72, limit=8
attempt to access beyond end of device
loop4: rw=0, want=128, limit=8
(2426,1):ocfs2_sb_probe:463 ERROR: incompatible version: 2.1903388787
(2426,1):ocfs2_sb_probe:476 ERROR: This is an ocfs v1 filesystem which must be upgraded before mounting with ocfs v2
(2426,1):ocfs2_fill_super:561 ERROR: superblock probe failed!
attempt to access beyond end of device
loop4: rw=48, want=136, limit=8
gfs2: error -5 reading superblock
GFS2: Unrecognized block device or mount point /dev/loop4
GFS2: gfs2 mount does not exist
UDF-fs: No VRS found
(2553,0):ocfs2_fill_super:561 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/loop5
GFS2: gfs2 mount does not exist
UDF-fs: No VRS found
(2680,1):ocfs2_fill_super:561 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/loop6
GFS2: gfs2 mount does not exist
UDF-fs: No VRS found
(2807,1):ocfs2_fill_super:561 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/loop7
GFS2: gfs2 mount does not exist
UDF-fs: No VRS found
(2934,0):ocfs2_fill_super:561 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/loop8
GFS2: gfs2 mount does not exist
UDF-fs: No VRS found
(3061,0):ocfs2_fill_super:561 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/loop9
GFS2: gfs2 mount does not exist
UDF-fs: No VRS found
(3188,0):ocfs2_fill_super:561 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/loop10
GFS2: gfs2 mount does not exist
UDF-fs: No VRS found
(3315,0):ocfs2_fill_super:561 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/loop11
GFS2: gfs2 mount does not exist
fuse exit
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
Yenta: CardBus bridge found at 0000:08:00.0 [1025:013b]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x04b8, PCI irq 19
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
cs: IO port probe 0x1000-0x1fff: clean.
pcmcia: parent PCI bridge Memory window: 0x92000000 - 0x940fffff
pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x91ffffff
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:07:00.2 [197b:2381] (rev 0)
ACPI: PCI Interrupt 0000:07:00.2[A] -> GSI 16 (level, low) -> IRQ 17
sdhci:slot0: Unknown controller version (1). You may experience problems.
PCI: Setting latency timer of device 0000:07:00.2 to 64
mmc0: SDHCI at 0x98900200 irq 17 DMA
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: excluding 0x820-0x827
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xa00-0xaff: clean.
input: PC Speaker as /class/input/input6
input: PS/2 Generic Mouse as /class/input/input7
lp: driver loaded but no devices found
Linux agpgart interface v0.102 (c) Dave Jones
fuse init (API version 7.8)
Capability LSM initialized
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available