rendered paste bodyLinux version 2.4.27-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Wed Aug 17 09:33:35 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000013ffc000 (usable)
BIOS-e820: 0000000013ffc000 - 0000000013fff000 (ACPI data)
BIOS-e820: 0000000013fff000 - 0000000014000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
319MB LOWMEM available.
On node 0 totalpages: 81916
zone(0): 4096 pages.
zone(1): 77820 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
Kernel command line: root=/dev/hdb1 ro
No local APIC present or hardware disabled
Initializing CPU#0
Detected 451.038 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 901.12 BogoMIPS
Memory: 318132k/327664k available (1069k kernel code, 9148k reserved, 459k data, 96k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
CPU: Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf06c0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3692 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done.
Freeing initrd memory: 3692k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
ALI15X3: IDE controller at PCI slot 00:0f.0
ALI15X3: chipset revision 193
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio
hda: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive
hdb: Maxtor 53073H4, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
blk: queue d4825c9c, I/O limit 4095Mb (mask 0xffffffff)
hdc: WDC WD800EB-11DJF0, ATA DISK drive
blk: queue d4825fb4, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdb: attached ide-disk driver.
hdb: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=59554/16/63, UDMA(33)
hdc: attached ide-disk driver.
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, (U)DMA
Partition check:
/dev/ide/host0/bus0/target1/lun0: [PTBL] [3736/255/63] p1 p2 < p5 >
/dev/ide/host0/bus1/target0/lun0: p1
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 955828k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
Real Time Clock Driver v1.10f
hda: attached ide-cdrom driver.
hda: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
device-mapper: 4.1.1-ioctl (2004-04-07) initialised: dm-devel@redhat.com
Intel(R) PRO/100 Network Driver - version 2.3.43-k1
Copyright (c) 2004 Intel Corporation
PCI: Found IRQ 7 for device 00:09.0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
cpu cycle saver enabled
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
PCI: Found IRQ 10 for device 00:0a.0
tulip0: MII transceiver #1 config 3000 status 7809 advertising 01e1.
eth1: Lite-On 82c168 PNIC rev 32 at 0xd400, 02:00:09:E3:BA:35, IRQ 10.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 5 for device 00:02.0
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xd4934000, IRQ 5
usb-ohci.c: usb-00:02.0, ALi Corporation USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
e100: eth0 NIC Link is Up 100 Mbps Full duplex
keyboard: Timeout - AT keyboard not present?(f4)
(I tried mounting the wrong device a couple of times)
Unable to identify CD-ROM format.
Unable to identify CD-ROM format.
(?)
inserting floppy driver for 2.4.27-2-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
(trying to mount correct device)
hda: irq timeout: status=0xd0 { Busy }
hda: irq timeout: error=0x00
hda: DMA disabled
hda: ATAPI reset complete
hda: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hda: media error (bad sector): error=0x30
end_request: I/O error, dev 03:00 (hda), sector 64
isofs_read_super: bread failed, dev=03:00, iso_blknum=16, block=32
hda: irq timeout: status=0xd0 { Busy }
hda: irq timeout: error=0x00
hda: ATAPI reset complete
hda: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hda: media error (bad sector): error=0x30
end_request: I/O error, dev 03:00 (hda), sector 64
isofs_read_super: bread failed, dev=03:00, iso_blknum=16, block=32
cdrom: open failed.
cdrom: open failed.
hda: irq timeout: status=0xd0 { Busy }
hda: irq timeout: error=0x00
hda: ATAPI reset complete
hda: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hda: media error (bad sector): error=0x30
end_request: I/O error, dev 03:00 (hda), sector 64
isofs_read_super: bread failed, dev=03:00, iso_blknum=16, block=32