;; Static extension configuration file, used by; the pbx_config module. This is where you configure all your; inbound and outbound calls in Asterisk.;; This configuration file is reloaded; - With the "extensions reload" command in the CLI; - With the "reload" command (that reloads everything) in the CLI;; The "General" category is for certain variables.;[general];; If static is set to no, or omitted, then the pbx_config will rewrite; this file when extensions are modified. Remember that all comments; made in the file will be lost when that happens.;; XXX Not yet implemented XXX;static=yes;; if static=yes and writeprotect=no, you can save dialplan by; CLI command 'save dialplan' too;writeprotect=no;; If autofallthrough is set, then if an extension runs out of; things to do, it will terminate the call with BUSY, CONGESTION; or HANGUP depending on Asterisk's best guess (strongly recommended).;; If autofallthrough is not set, then if an extension runs out of; things to do, asterisk will wait for a new extension to be dialed; (this is the original behavior of Asterisk 1.0 and earlier).;autofallthrough=yes;; If clearglobalvars is set, global variables will be cleared; and reparsed on an extensions reload, or Asterisk reload.;; If clearglobalvars is not set, then global variables will persist; through reloads, and even if deleted from the extensions.conf or; one of its included files, will remain set to the previous value.;clearglobalvars=no;; If priorityjumping is set to 'yes', then applications that support; 'jumping' to a different priority based on the result of their operations; will do so (this is backwards compatible behavior with pre-1.2 releases; of Asterisk). Individual applications can also be requested to do this; by passing a 'j' option in their arguments.;priorityjumping=no;; You can include other config files, use the #include command; (without the ';'). Note that this is different from the "include" command; that includes contexts within other contexts. The #include command works; in all asterisk configuration files.;#include "filename.conf"; The "Globals" category contains global variables that can be referenced; in the dialplan with ${VARIABLE} or ${ENV(VARIABLE)} for Environmental; variables,; ${${VARIABLE}} or ${text${VARIABLE}} or any hybrid;[globals]CONSOLE=Console/dsp ; Console interface for demo;CONSOLE=Zap/1;CONSOLE=Phone/phone0IAXINFO=guest ; IAXtel username/password;IAXINFO=myuser:mypass;;;;;TRUNK=Zap/G2 ; Trunk interfaceTRUNK=Zap/G2 ; Trunk interface;; Note the 'g2' in the TRUNK variable above. It specifies which group (defined; in zapata.conf) to dial, i.e. group 2, and how to choose a channel to use in; the specified group. The four possible options are:;; g: select the lowest-numbered non-busy Zap channel; (aka. ascending sequential hunt group).; G: select the highest-numbered non-busy Zap channel; (aka. descending sequential hunt group).; r: use a round-robin search, starting at the next highest channel than last; time (aka. ascending rotary hunt group).; R: use a round-robin search, starting at the next lowest channel than last; time (aka. descending rotary hunt group).;TRUNKMSD=1 ; MSD digits to strip (usually 1 or 0);TRUNK=IAX2/user:pass@provider;; Any category other than "General" and "Globals" represent; extension contexts, which are collections of extensions.;; Extension names may be numbers, letters, or combinations; thereof. If an extension name is prefixed by a '_'; character, it is interpreted as a pattern rather than a; literal. In patterns, some characters have special meanings:;; X - any digit from 0-9; Z - any digit from 1-9; N - any digit from 2-9; [1235-9] - any digit in the brackets (in this example, 1,2,3,5,6,7,8,9); . - wildcard, matches anything remaining (e.g. _9011. matches; anything starting with 9011 excluding 9011 itself); ! - wildcard, causes the matching process to complete as soon as; it can unambiguously determine that no other matches are possible;; For example the extension _NXXXXXX would match normal 7 digit dialings,; while _1NXXNXXXXXX would represent an area code plus phone number; preceeded by a one.;; Each step of an extension is ordered by priority, which must; always start with 1 to be considered a valid extension. The priority; "next" or "n" means the previous priority plus one, regardless of whether; the previous priority was associated with the current extension or not.; The priority "same" or "s" means the same as the previously specified; priority, again regardless of whether the previous entry was for the; same extension. Priorities may be immediately followed by a plus sign; and another integer to add that amount (most useful with 's' or 'n').; Priorities may then also have an alias, or label, in; parenthesis after their name which can be used in goto situations;; Contexts contain several lines, one for each step of each; extension, which can take one of two forms as listed below,; with the first form being preferred. One may include another; context in the current one as well, optionally with a; date and time. Included contexts are included in the order; they are listed.;;[context];exten => someexten,priority[+offset][(alias)],application(arg1,arg2,...);exten => someexten,priority[+offset][(alias)],application,arg1|arg2...;; Timing list for includes is;; <time range>|<days of week>|<days of month>|<months>;;include => daytime|9:00-17:00|mon-fri|*|*;; ignorepat can be used to instruct drivers to not cancel dialtone upon; receipt of a particular pattern. The most commonly used example is; of course '9' like this:;;ignorepat => 9;; so that dialtone remains even after dialing a 9.;;; Sample entries for extensions.conf;;[dundi-e164-canonical];; List canonical entries here;;exten => 12564286000,1,Macro(std-exten,6000,IAX2/foo);exten => _125642860XX,1,Dial(IAX2/otherbox/${EXTEN:7})[dundi-e164-customers];; If you are an ITSP or Reseller, list your customers here.;;exten => _12564286000,1,Dial(SIP/customer1);exten => _12564286001,1,Dial(IAX2/customer2)[dundi-e164-via-pstn];; If you are freely delivering calls to the PSTN, list them here;;exten => _1256428XXXX,1,Dial(Zap/g2/${EXTEN:7}) ; Expose all of 256-428;exten => _1256325XXXX,1,Dial(Zap/g2/${EXTEN:7}) ; Ditto for 256-325[dundi-e164-local];; Context to put your dundi IAX2 or SIP user in for; full access;include => dundi-e164-canonicalinclude => dundi-e164-customersinclude => dundi-e164-via-pstn[dundi-e164-switch];; Just a wrapper for the switch;switch => DUNDi/e164[dundi-e164-lookup];; Locally to lookup, try looking for a local E.164 solution; then try DUNDi if we don't have one.;include => dundi-e164-localinclude => dundi-e164-switch;; DUNDi can also be implemented as a Macro instead of using; the Local channel driver.;[macro-dundi-e164];; ARG1 is the extension to Dial;exten => s,1,Goto(${ARG1},1)include => dundi-e164-lookup;; Here are the entries you need to participate in the IAXTEL; call routing system. Most IAXTEL numbers begin with 1-700, but; there are exceptions. For more information, and to sign; up, please go to www.gnophone.com or www.iaxtel.com;[iaxtel700]exten => _91700XXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel);; The SWITCH statement permits a server to share the dialplain with; another server. Use with care: Reciprocal switch statements are not; allowed (e.g. both A -> B and B -> A), and the switched server needs; to be on-line or else dialing can be severly delayed.;[iaxprovider];switch => IAX2/user:[key]@myserver/mycontext[trunkint];; International long distance through trunk;exten => _9011.,1,Macro(dundi-e164,${EXTEN:4})exten => _9011.,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})[trunkld];; Long distance context accessed through trunk;exten => _91NXXNXXXXXX,1,Macro(dundi-e164,${EXTEN:1})exten => _91NXXNXXXXXX,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})[trunklocal];; Local seven-digit dialing accessed through trunk interface;exten => _9NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})[trunktollfree];; Long distance context accessed through trunk interface;exten => _91800NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})exten => _91888NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})exten => _91877NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})exten => _91866NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})[international];; Master context for international long distance;ignorepat => 9include => longdistanceinclude => trunkint[longdistance];; Master context for long distance;ignorepat => 9include => localinclude => trunkld[local];; Master context for local, toll-free, and iaxtel calls only;ignorepat => 9include => defaultinclude => parkedcallsinclude => trunklocalinclude => iaxtel700include => trunktollfreeinclude => iaxprovider;; You can use an alternative switch type as well, to resolve; extensions that are not known here, for example with remote; IAX switching you transparently get access to the remote; Asterisk PBX;; switch => IAX2/user:password@bigserver/local;; An "lswitch" is like a switch but is literal, in that; variable substitution is not performed at load time; but is passed to the switch directly (presumably to; be substituted in the switch routine itself);; lswitch => Loopback/12${EXTEN}@othercontext;; An "eswitch" is like a switch but the evaluation of; variable substitution is performed at runtime before; being passed to the switch routine.;; eswitch => IAX2/context@${CURSERVER}[macro-stdexten];;; Standard extension macro:; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well; ${ARG2} - Device(s) to ring;exten => s,1,Dial(${ARG2},20) ; Ring the interface, 20 seconds maximumexten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)exten => s-NOANSWER,1,Voicemail(u${ARG1}@tbb) ; If unavailable, send to voicemail w/ unavail announce;exten => s-NOANSWER,2,Goto(incoming,s,1) ; If they press #, return to startexten => s-NOANSWER,2,Hangupexten => s-BUSY,1,Voicemail(b${ARG1}@tbb) ; If busy, send to voicemail w/ busy announceexten => s-BUSY,2,Goto(incoming,s,1) ; If they press #, return to startexten => _s-.,1,Goto(s-NOANSWER,1) ; Treat anything else as no answerexten => a,1,VoicemailMain(${ARG1}@tbb) ; If they press *, send the user into VoicemailMain[macro-stdPrivacyexten];;; Standard extension macro:; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well; ${ARG2} - Device(s) to ring; ${ARG3} - Optional DONTCALL context name to jump to (assumes the s,1 extension-priority); ${ARG4} - Optional TORTURE context name to jump to (assumes the s,1 extension-priority)`;exten => s,1,Dial(${ARG2},20|p) ; Ring the interface, 20 seconds maximum, call screening option (or use P for databased call screening)exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)exten => s-NOANSWER,1,Voicemail(u${ARG1}) ; If unavailable, send to voicemail w/ unavail announceexten => s-NOANSWER,2,Goto(default,s,1) ; If they press #, return to startexten => s-BUSY,1,Voicemail(b${ARG1}) ; If busy, send to voicemail w/ busy announceexten => s-BUSY,2,Goto(default,s,1) ; If they press #, return to startexten => s-DONTCALL,1,Goto(${ARG3},s,1) ; Callee chose to send this call to a polite "Don't call again" script.exten => s-TORTURE,1,Goto(${ARG4},s,1) ; Callee chose to send this call to a telemarketer torture script.exten => _s-.,1,Goto(s-NOANSWER,1) ; Treat anything else as no answerexten => a,1,VoicemailMain(${ARG1}) ; If they press *, send the user into VoicemailMain[demo];; We start with what to do when a call first comes in.;exten => s,1,Wait,1 ; Wait a second, just for funexten => s,n,Answer ; Answer the lineexten => s,n,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 secondsexten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 secondsexten => s,n(restart),BackGround(demo-congrats) ; Play a congratulatory messageexten => s,n(instruct),BackGround(demo-instruct) ; Play some instructionsexten => s,n,WaitExten ; Wait for an extension to be dialed.exten => 2,1,BackGround(demo-moreinfo) ; Give some more information.exten => 2,n,Goto(s,instruct)exten => 3,1,Set(LANGUAGE()=fr) ; Set language to frenchexten => 3,n,Goto(s,restart) ; Start with the congratulationsexten => 1000,1,Goto(default,s,1);; We also create an example user, 1234, who is on the console and has; voicemail, etc.;exten => 1234,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 1234,n,Macro(stdexten,1234,${CONSOLE})exten => 1235,1,Voicemail(u1234) ; Right to voicemailexten => 1236,1,Dial(Console/dsp) ; Ring foreverexten => 1236,n,Voicemail(u1234) ; Unless busy;; # for when they're done with the demo;exten => #,1,Playback(demo-thanks) ; "Thanks for trying the demo"exten => #,n,Hangup ; Hang them up.;; A timeout and "invalid extension rule";exten => t,1,Goto(#,1) ; If they take too long, give upexten => i,1,Playback(invalid) ; "That's not valid, try again";; Create an extension, 500, for dialing the; Asterisk demo.;exten => 500,1,Playback(demo-abouttotry); Let them know what's going onexten => 500,n,Dial(IAX2/guest@misery.digium.com/s@default) ; Call the Asterisk demoexten => 500,n,Playback(demo-nogo) ; Couldn't connect to the demo siteexten => 500,n,Goto(s,6) ; Return to the start over message.;; Create an extension, 600, for evaulating echo latency.;exten => 600,1,Playback(demo-echotest) ; Let them know what's going onexten => 600,n,Echo ; Do the echo testexten => 600,n,Playback(demo-echodone) ; Let them know it's overexten => 600,n,Goto(s,6) ; Start over;; Give voicemail at extension 8500;exten => 8500,1,VoicemailMainexten => 8500,n,Goto(s,6);; Here's what a phone entry would look like (IXJ for example);;exten => 1265,1,Dial(Phone/phone0,15);exten => 1265,n,Goto(s,5);[mainmenu];; Example "main menu" context with submenu;;exten => s,1,Answer;exten => s,n,Background(thanks) ; "Thanks for calling press 1 for sales, 2 for support, ...";exten => s,n,WaitExten;exten => 1,1,Goto(submenu,s,1);exten => 2,1,Hangup;include => default;;[submenu];exten => s,1,Ringing ; Make them comfortable with 2 seconds of ringback;exten => s,n,Wait,2;exten => s,n,Background(submenuopts) ; "Thanks for calling the sales department. Press 1 for steve, 2 for...";exten => s,n,WaitExten;exten => 1,1,Goto(default,steve,1);exten => 2,1,Goto(default,mark,2)[default];; By default we include the demo. In a production system, you; probably don't want to have the demo there.;;include => demo;; Extensions like the two below can be used for FWD, Nikotel, sipgate etc.; Note that you must have a [sipprovider] section in sip.conf whereas; the otherprovider.net example does not require such a peer definition;;exten => _41X.,1,Dial(SIP/${EXTEN:2}@sipprovider,,r);exten => _42X.,1,Dial(SIP/user:passwd@${EXTEN:2}@otherprovider.net,30,rT); Real extensions would go here. Generally you want real extensions to be; 4 or 5 digits long (although there is no such requirement) and start with a; single digit that is fairly large (like 6 or 7) so that you have plenty of; room to overlap extensions and menu options without conflict. You can alias; them with names, too, and use global variables;exten => 6245,hint,SIP/Grandstream1&SIP/Xlite1,Joe Schmoe ; Channel hints for presence;exten => 6245,1,Dial(SIP/Grandstream1,20,rt) ; permit transfer;exten => 6245,n(dial),Dial(${HINT},20,rtT) ; Use hint as listed;exten => 6245,n,Voicemail(u6245) ; Voicemail (unavailable);exten => 6245,s+1,Hangup ; s+1, same as n;exten => 6245,dial+101,Voicemail(b6245) ; Voicemail (busy);exten => 6361,1,Dial(IAX2/JaneDoe,,rm) ; ring without time limit;exten => 6389,1,Dial(MGCP/aaln/1@192.168.0.14);exten => 6394,1,Dial(Local/6275/n) ; this will dial ${MARK};exten => 6275,1,Macro(stdexten,6275,${MARK}) ; assuming ${MARK} is something like Zap/2;exten => mark,1,Goto(6275|1) ; alias mark to 6275;exten => 6536,1,Macro(stdexten,6236,${WIL}) ; Ditto for wil;exten => wil,1,Goto(6236|1);; Some other handy things are an extension for checking voicemail via; voicemailmain;;exten => 8500,1,VoicemailMain;exten => 8500,n,Hangup;; Or a conference room (you'll need to edit meetme.conf to enable this room);;exten => 8600,1,Meetme(1234);; Or playing an announcement to the called party, as soon it answers;;exten = 8700,1,Dial(${MARK},30,A(/path/to/my/announcemsg));; For more information on applications, just type "show applications" at your; friendly Asterisk CLI prompt.;; 'show application <command>' will show details of how you; use that particular application in this file, the dial plan.;[sip]exten => 101,1,Dial(SIP/bharvey,20,tr)exten => 201,1,Dial(SIP/mdegraw,20,tr)exten => 301,1,Dial(SIP/chalsall,20,tr)exten => 302,1,Dial(SIP/rblades,20,tr)exten => 1000,1,Dial(SIP/chalsall&SIP/mdegraw,20,tr)exten => _91.,1,Dial(${TRUNK}/${EXTEN-1});exten => _9.,1,Dial(${TRUNK}/${EXTEN-1})exten => _9.,1,Dial(${TRUNK}/${EXTEN:1})[in_bharvey]exten => s,1,Answer()exten => s,n,Set(CALLERID(all)="Harvey Direct")exten => s,n,Dial(SIP/bharvey,10,tr)exten => s,n,Playback(pbx-transfer) ; "Please hold while..."exten => s,n,Macro(stdexten,310,SIP/bharvey&SIP/ljohnson)exten => s,n,Voicemail(u310@tbb) ; Right to voicemail[incoming--old]exten => s,1,Answer()exten => s,n,Directory(tbb,isip)[sip_no_out]include => targetsexten => 9999,1,VoiceMailMain(@tbb)exten => 8888,1,Directory(tbb,isip)[isip]include => targetsexten => 500,1,MusicOnHold()exten => 9999,1,VoiceMailMain(@tbb)exten => 9999301,1,Wait(1)exten => 9999301,n,VoiceMailMain(301@tbb);;;; Special voice mail extensions for 601 users.exten => 9999310,1,Wait(1)exten => 9999310,n,VoiceMailMain(310@tbb)exten => 9999320,1,Wait(1)exten => 9999320,n,VoiceMailMain(320@tbb)exten => 9999360,1,Wait(1)exten => 9999360,n,VoiceMailMain(360@tbb)exten => 9999361,1,Wait(1)exten => 9999361,n,VoiceMailMain(360@tbb)exten => 9999410,1,Wait(1)exten => 9999410,n,VoiceMailMain(410@tbb)exten => 9999420,1,Wait(1)exten => 9999420,n,VoiceMailMain(420@tbb)exten => 9999610,1,Wait(1)exten => 9999610,n,VoiceMailMain(610@tbb)exten => 9999620,1,Wait(1)exten => 9999620,n,VoiceMailMain(620@tbb)exten => 9999630,1,Wait(1)exten => 9999630,n,VoiceMailMain(630@tbb)exten => 9999700,1,Wait(1)exten => 9999700,n,VoiceMailMain(700@tbb)exten => 9999710,1,Wait(1)exten => 9999710,n,VoiceMailMain(710@tbb)exten => 9999720,1,Wait(1)exten => 9999720,n,VoiceMailMain(720@tbb)exten => 9999730,1,Wait(1)exten => 9999730,n,VoiceMailMain(730@tbb)exten => 9999740,1,Wait(1)exten => 9999740,n,VoiceMailMain(740@tbb)exten => 9999750,1,Wait(1)exten => 9999750,n,VoiceMailMain(750@tbb)exten => 8888,1,Directory(tbb,isip)exten => 7777,1,Background(tbb_welcome)exten => _9.,1,Dial(${TRUNK}/${EXTEN:1})exten => _XXXXXXX,1,Dial(${TRUNK}/${EXTEN})exten => 5555,1,Goto(newin,s,1)exten => 2222,1,Goto(demo,s,1)exten => 2341,1,Playback(conf-thereare)exten => 2341,n,MeetMeCount(2001)exten => 2341,n,Playback(conf-peopleinconf)exten => 2341,n,MeetMe(2001)[targets];; BHarvey -- GMexten => 310,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 310,n,Macro(stdexten,310,SIP/bharvey)exten => 310,n,Voicemail(u310@tbb) ; Right to voicemail;; PHinkson -- Comptrollerexten => 320,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 320,n,Macro(stdexten,320,SIP/phinkson)exten => 320,n,Voicemail(u320@tbb) ; Right to voicemail;; ARoy -- Comptrollerexten => 350,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 350,n,Macro(stdexten,350,SIP/arijitroy)exten => 350,n,Voicemail(u350@tbb) ; Right to voicemail;; LJohnson -- Exec.Assistexten => 360,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 360,n,Macro(stdexten,360,SIP/ljohnson)exten => 360,n,Voicemail(u360@tbb) ; Right to voicemailexten => 361,1,Voicemail(u361@tbb) ; Right to voicemail;; ASpare1 -- Techexten => 370,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 370,n,Macro(stdexten,370,SIP/adminspare1);; ASpare2 -- Techexten => 380,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 380,n,Macro(stdexten,380,SIP/adminspare2)exten => 380,n,Voicemail(u380@tbb) ; Right to voicemail;; DMartin -- Exec.Assistexten => 390,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 390,n,Macro(stdexten,390,SIP/dmartin)exten => 390,n,Voicemail(u390@tbb) ; Right to voicemail;; MDegraw -- Salesexten => 410,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 410,n,Macro(stdexten,410,SIP/mdegraw)exten => 410,n,Voicemail(u410@tbb) ; Right to voicemail;; AMassiah -- Salesexten => 420,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 420,n,Macro(stdexten,420,SIP/amassiah)exten => 420,n,Voicemail(u420@tbb) ; Right to voicemailexten => 420,hint,SIP/amassiah ; "Please hold while..." ; (but skip if channel is not up);; JGreaves -- Salesexten => 430,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 430,n,Macro(stdexten,430,SIP/jgreaves)exten => 430,n,Voicemail(u430@tbb) ; Right to voicemail;; SMorgan -- OSPexten => 610,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 610,n,Macro(stdexten,610,SIP/llaucella)exten => 610,n,Voicemail(u610@tbb) ; Right to voicemail;; CHarris -- OSPexten => 620,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 620,n,Macro(stdexten,620,SIP/charris)exten => 620,n,Voicemail(u620@tbb) ; Right to voicemail;; JKnight -- OSPexten => 630,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 630,n,Macro(stdexten,630,SIP/jknight)exten => 630,n,Voicemail(u630@tbb) ; Right to voicemail;; DTaitt -- Techexten => 640,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 640,n,Macro(stdexten,640,SIP/dtaitt)exten => 640,n,Voicemail(u640@tbb) ; Right to voicemail;; MWalcott -- Techexten => 650,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 650,n,Macro(stdexten,650,SIP/mwalcott)exten => 650,n,Voicemail(u650@tbb) ; Right to voicemail;; AShorey -- Techexten => 660,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 660,n,Macro(stdexten,660,SIP/ashorey)exten => 660,n,Voicemail(u660@tbb) ; Right to voicemailexten => 700,1,Voicemail(700@tbb) ; Right to voicemail;; LLaucella -- Techexten => 710,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 710,n,Macro(stdexten,710,SIP/llaucella)exten => 710,n,Voicemail(u710@tbb) ; Right to voicemail;; Chalsall -- Techexten => 720,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 720,n,Voicemail(u710@tbb) ; Right to voicemail;; LLaucella -- Techexten => 730,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 730,n,Macro(stdexten,730,SIP/mparzynski)exten => 730,n,Voicemail(u730@tbb) ; Right to voicemail;; CCorbin -- Techexten => 740,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 740,n,Macro(stdexten,740,SIP/ccorbin)exten => 740,n,Voicemail(u740@tbb) ; Right to voicemail;; RBlades -- Techexten => 750,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 750,n,Macro(stdexten,750,SIP/rblades)exten => 750,n,Voicemail(u750@tbb) ; Right to voicemail;; NLayne -- Techexten => 760,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 760,n,Macro(stdexten,760,SIP/nlayne)exten => 760,n,Voicemail(u760@tbb) ; Right to voicemail;; TSpare1 -- Techexten => 770,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 770,n,Macro(stdexten,770,SIP/tspare1)exten => 770,n,Voicemail(u770@tbb) ; Right to voicemail;; EMillington -- Techexten => 780,1,Playback(transfer,skip) ; "Please hold while..." ; (but skip if channel is not up)exten => 780,n,Macro(stdexten,780,SIP/emillington)exten => 780,n,Voicemail(u780@tbb) ; Right to voicemail;; BoardRoomexten => 810,1,Dial(SIP/room100)exten => 820,1,Dial(SIP/room200)exten => 830,1,Dial(SIP/room300)exten => 840,1,Dial(SIP/boardroom);; Garrison Landing Stationexten => 890,1,Dial(SIP/blpglandingstation);; Mailbox target for recording greetingsexten => 301,1,Voicemail(u301@tbb)exten => 789,1,Goto(tbb_newincoming,s,1)[incoming_old];; We start with what to do when a call first comes in.;exten => s,1,Answer ; Answer the line;exten => s,n,ResponseTimeout(10)exten => s,n,Background(tbb_welcome)exten => s,n,WaitExten ; Wait for an extension to be dialed.;exten => 2,1,BackGround(demo-moreinfo) ; Give some more information.;exten => 2,n,Goto(s,instruct)exten => 0,1,goto(tbb_operator,s,1)exten => 3,1,Goto(tbb_admin,s,1)exten => 4,1,Goto(tbb_sales,s,1)exten => 5,1,Goto(tbb_tech,s,1)exten => 8,1,Directory(tbb,isip)include => targets;; A timeout and "invalid extension rule";;exten => t,1,Goto(#,1) ; If they take too long, give upexten => i,1,Playback(invalid) ; "That's not valid, try again"exten => i,n,Goto(s,1) ; "That's not valid, try again"[tbb_tech]exten => s,1,Set(CALLERID(all)="NOC Call")exten => s,n,Macro(stdexten,700,SIP/chalsall&SIP/rblades&SIP/ccorbin&SIP/charris&SIP/jknight&SIP/llaucella&SIP/emillington&SIP/nlayne&SIP/dtaitt)exten => s,n,Hangup()[tbb_sales]exten => s,1,Set(CALLERID(all)="Sales Call")exten => s,n,Macro(stdexten,420,SIP/mdegraw&SIP/amassiah&SIP/jgreaves)exten => s,n,Hangup()[tbb_admin]exten => s,1,Set(CALLERID(all)="Admin Call")exten => s,n,Macro(stdexten,360,SIP/ljohnson&SIP/phinkson&SIP/adminspare2)exten => s,n,Hangup()[tbb_billing]exten => s,1,Set(CALLERID(all)="Billing Call")exten => s,n,Macro(stdexten,360,SIP/adminspare2&SIP/phinkson)exten => s,n,Hangup()[tbb_operator]exten => s,1,Set(CALLERID(all)="Operator Call")exten => s,n,Macro(stdexten,300,SIP/ljohnson)exten => s,n,Hangup()[incoming];; We start with what to do when a call first comes in.;exten => s,1,Answer ; Answer the line;exten => s,n,ResponseTimeout(10)exten => s,n,Background(tbb_welcome2)exten => s,n,WaitExten ; Wait for an extension to be dialed.exten => 2,1,Directory(tbb,isip)exten => 3,1,Goto(tbb_tech,s,1)exten => 4,1,Goto(tbb_billing,s,1)exten => 5,1,Goto(tbb_sales,s,1)exten => 6,1,Goto(tbb_admin,s,1)exten => 0,1,Goto(tbb_operator,s,1)exten => t,1,Goto(tbb_operator,s,1)include => targets