jtag> cable DLC5 parallel 0x378Initializing parallel port at 0x378jtag> detectIR length: 7Chain length: 1Device Id: 00011001001001110111000000010011 (0x0000000019277013) Manufacturer: Intel Part(0): IXP425-266MHz Stepping: B0 Filename: /usr/local/share/urjtag/intel/ixp425/ixp425jtag> detectflash 0x0Query identification string: Primary Algorithm Command Set and Control Interface ID Code: 0x0001 (Intel/Sharp Extended Command Set) Alternate Algorithm Command Set and Control Interface ID Code: 0x0000 (null)Query system interface information: Vcc Logic Supply Minimum Write/Erase or Write voltage: 2700 mV Vcc Logic Supply Maximum Write/Erase or Write voltage: 3600 mV Vpp [Programming] Supply Minimum Write/Erase voltage: 0 mV Vpp [Programming] Supply Maximum Write/Erase voltage: 0 mV Typical timeout per single byte/word program: 256 us Typical timeout for maximum-size multi-byte program: 256 us Typical timeout per individual block erase: 2048 ms Typical timeout for full chip erase: 0 ms Maximum timeout for byte/word program: 1024 us Maximum timeout for multi-byte program: 1024 us Maximum timeout per individual block erase: 16384 ms Maximum timeout for chip erase: 0 msDevice geometry definition: Device Size: 16777216 B (16384 KiB, 16 MiB) Flash Device Interface Code description: 0x0002 (x8/x16) Maximum number of bytes in multi-byte program: 32 Number of Erase Block Regions within device: 1 Erase Block Region Information: Region 0: Erase Block Size: 131072 B (128 KiB) Number of Erase Blocks: 128jtag> print No. Manufacturer Part Stepping Instruction Register------------------------------------------------------------------------------------------------------------------- 0 Intel IXP425-266MHz B0 EXTEST BSRActive bus:*0: Intel IXP425 compatible bus driver via BSR (JTAG part No. 0) start: 0x00000000, length: 0x100000000, data width: 16 bitjtag>