# File generated by xf86config.## Copyright (c) 1999 by The XFree86 Project, Inc.## Permission is hereby granted, free of charge, to any person obtaining a# copy of this software and associated documentation files (the "Software"),# to deal in the Software without restriction, including without limitation# the rights to use, copy, modify, merge, publish, distribute, sublicense,# and/or sell copies of the Software, and to permit persons to whom the# Software is furnished to do so, subject to the following conditions:# # The above copyright notice and this permission notice shall be included in# all copies or substantial portions of the Software.# # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE# SOFTWARE.# # Except as contained in this notice, the name of the XFree86 Project shall# not be used in advertising or otherwise to promote the sale, use or other# dealings in this Software without prior written authorization from the# XFree86 Project.## **********************************************************************# Refer to the XF86Config(4/5) man page for details about the format of # this file.# **********************************************************************# **********************************************************************# Module section -- this section is used to specify# which dynamically loadable modules to load.# **********************************************************************#Section "Module"# This loads the DBE extension module.# Load "dbe" # Double buffer extension# Load "xfree86-dga"# This loads the miscellaneous extensions module, and enables# initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "xfree86-dga" # initialise the DGA extension EndSubSection# This loads the Type1 and FreeType font modules Load "type1" Load "speedo" Load "freetype"# Load "xtt"# This loads the GLX module Load "glx"# This loads the DRI module# Load "dri" Load "v4l"EndSection# **********************************************************************# Files section. This allows default font and rgb paths to be set# **********************************************************************Section "Files"# The location of the RGB database. Note, this is the name of the# file minus the extension (like ".txt" or ".db"). There is normally# no need to change the default. RgbPath "/usr/lib/X11/rgb"# Multiple FontPath entries are allowed (which are concatenated together),# as well as specifying multiple comma-separated entries in one FontPath# command (or a combination of both methods)# # If you don't have a floating point coprocessor and emacs, Mosaic or other# programs take long to start up, try moving the Type1 and Speedo directory# to the end of this list (or comment them out).# # FontPath "/usr/share/fonts/TrueType/"# FontPath "/usr/share/fonts/freefont/"# The module search path. The default path is shown here.# ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/Type1" FontPath "/usr/local/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/ukr" FontPath "/usr/local/share/fonts/truetype"EndSection# **********************************************************************# Server flags section.# **********************************************************************Section "ServerFlags"# Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may# provide a better stack trace in the core dump to aid in debugging# Option "NoTrapSignals"# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence# (where n is 1 through 12). This allows clients to receive these key# events.# Option "DontVTSwitch"# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence# This allows clients to receive this key event.# Option "DontZap"# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching# sequences. This allows clients to receive these key events.# Option "Dont Zoom"# Uncomment this to disable tuning with the xvidtune client. With# it the client can still run and fetch card and monitor attributes,# but it will not be allowed to change them. If it tries it will# receive a protocol error.# Option "DisableVidModeExtension"# Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune"# Uncomment this to disable dynamically modifying the input device# (mouse and keyboard) settings. # Option "DisableModInDev"# Uncomment this to enable the use of a non-local client to# change the keyboard or mouse settings (currently only xset).# Option "AllowNonLocalModInDev"EndSection# **********************************************************************# Input devices# **********************************************************************# **********************************************************************# Core keyboard's InputDevice section# **********************************************************************Section "InputDevice" Identifier "Keyboard1" Driver "kbd"# For most OSs the protocol can be omitted (it defaults to "Standard").# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),# uncomment the following line.# Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30"# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))# Option "Xleds" "1 2 3"# Option "LeftAlt" "Meta"# Option "RightAlt" "ModeShift"# To customise the XKB settings to suit your keyboard, modify the# lines below (which are the defaults). For example, for a non-U.S.# keyboard, you will probably want to use:# Option "XkbModel" "pc102"# If you have a US Microsoft Natural keyboard, you can use:# Option "XkbModel" "microsoft"## Then to change the language, change the Layout setting.# For example, a german layout can be obtained with:# Option "XkbLayout" "de"# or:# Option "XkbLayout" "de"# Option "XkbVariant" "nodeadkeys"## If you'd like to switch the positions of your capslock and# control keys, use:# Option "XkbOptions" "ctrl:swapcaps"# These are the default XKB settings for XFree86# Option "XkbModel" "pc101"# Option "XkbLayout" "us"# Option "XkbVariant" ""# Option "XkbOptions" ""# Option "XkbDisable" Option "XkbModel" "pc105" Option "XkbLayout" "es"EndSectionSection "InputDevice" Identifier "mousedummy" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/null"EndSection# **********************************************************************# Core Pointer's InputDevice section# **********************************************************************Section "InputDevice"# Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5"# Mouse-speed setting for PS/2 mouse.# Option "Resolution" "256"# When using XQUEUE, comment out the above two lines, and uncomment# the following line.# Option "Protocol" "Xqueue"# Baudrate and SampleRate are only for some Logitech mice. In# almost every case these lines should be omitted.# Option "BaudRate" "9600"# Option "SampleRate" "150"# Emulate3Buttons is an option for 2-button Microsoft mice# Emulate3Timeout is the timeout in milliseconds (default is 50ms)# Option "Emulate3Buttons"# Option "Emulate3Timeout" "50"# ChordMiddle is an option for some 3-button Logitech mice# Option "ChordMiddle"EndSection# **********************************************************************# Other input device sections # this is optional and is required only if you# are using extended input devices. This is for example only. Refer# to the XF86Config man page for a description of the options.# **********************************************************************## Section "InputDevice" # Identifier "Mouse2"# Driver "mouse"# Option "Protocol" "MouseMan"# Option "Device" "/dev/mouse2"# EndSection## Section "InputDevice"# Identifier "spaceball"# Driver "magellan"# Option "Device" "/dev/cua0"# EndSection## Section "InputDevice"# Identifier "spaceball2"# Driver "spaceorb"# Option "Device" "/dev/cua0"# EndSection## Section "InputDevice"# Identifier "touchscreen0"# Driver "microtouch"# Option "Device" "/dev/ttyS0"# Option "MinX" "1412"# Option "MaxX" "15184"# Option "MinY" "15372"# Option "MaxY" "1230"# Option "ScreenNumber" "0"# Option "ReportingMode" "Scaled"# Option "ButtonNumber" "1"# Option "SendCoreEvents"# EndSection## Section "InputDevice"# Identifier "touchscreen1"# Driver "elo2300"# Option "Device" "/dev/ttyS0"# Option "MinX" "231"# Option "MaxX" "3868"# Option "MinY" "3858"# Option "MaxY" "272"# Option "ScreenNumber" "0"# Option "ReportingMode" "Scaled"# Option "ButtonThreshold" "17"# Option "ButtonNumber" "1"# Option "SendCoreEvents"# EndSectionSection "InputDevice" Driver "wacom" Identifier "cursor" Option "Device" "/dev/input/wacom" # USB ONLY Option "Type" "cursor" Option "USB" "on" # USB ONLY Option "mode" "Relative"EndSectionSection "InputDevice" Driver "wacom" Identifier "stylus" Option "Device" "/dev/input/wacom" # USB ONLY Option "Type" "stylus" Option "USB" "on" # USB ONLY Option "Threshold" "50" Option "mode" "Absolute"EndSectionSection "InputDevice" Driver "wacom" Identifier "eraser" Option "Device" "/dev/input/wacom" # USB ONLY Option "Type" "eraser" Option "USB" "on" # USB ONLY Option "Threshold" "50" Option "mode" "Absolute"EndSection# **********************************************************************# Monitor section# **********************************************************************# Any number of monitor sections may be presentSection "Monitor" Identifier "LG L1710S FLATRON 17in"# HorizSync is in kHz unless units are specified.# HorizSync may be a comma separated list of discrete values, or a# comma separated list of ranges of values.# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S# USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5 - 83# HorizSync 30-64 # multisync# HorizSync 31.5, 35.2 # multiple fixed sync frequencies# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies# VertRefresh is in Hz unless units are specified.# VertRefresh may be a comma separated list of discrete values, or a# comma separated list of ranges of values.# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S# USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50 - 75 Option "DPMS" DisplaySize 339 272EndSectionSection "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor 800x600" DisplaySize 320 240 HorizSync 31.5 - 35.1 VertRefresh 30.0 - 80.0 Option "dpms"EndSectionSection "Monitor" Identifier "TTL CGA" ModelName "TTL CGA" DisplaySize 320 240 HorizSync 14.5 - 16.5 VertRefresh 47-53, 57-63 #Modeline "640x240" 12.59 640 656 752 800 240 245 246 262 -hsync -vsync Modeline "640x240" 12.59 640 712 776 800 240 248 251 262 +hsync +vsync Modeline "640x248" 12.59 640 712 776 800 248 248 249 262 +hsync +vsync Modeline "640x292" 12.59 640 712 776 800 292 293 294 314 +hsync +vsyncEndSection# **********************************************************************# Graphics device section# **********************************************************************# Any number of graphics device sections may be present# Standard VGA Device:#Section "Device"# Identifier "Standard VGA"# VendorName "Unknown"# BoardName "Unknown"# The chipset line is optional in most cases. It can be used to override# the driver's chipset detection, and should not normally be specified.# Chipset "generic"# The Driver line must be present. When using run-time loadable driver# modules, this line instructs the server to load the specified driver# module. Even when not using loadable driver modules, this line# indicates which driver should interpret the information in this section.# Driver "vga"# The BusID line is used to specify which of possibly multiple devices# this section is intended for. When this line isn't present, a device# section can only match up with the primary video device. For PCI# devices a line like the following could be used. This line should not# normally be included unless there is more than one video device# intalled.# BusID "PCI:0:10:0"# VideoRam 256# Clocks 25.2 28.3#EndSection# Device configured by xf86config:Section "Device" Identifier "NVIDIA Geforce 4 MX4000 128MB" Driver "nvidia" VendorName "nVidia" BusID "PCI:1:0:0" #BoardName "NVIDIA GeForce4 MX4000" #VideoRam 65536 #Option "TVOutFormat" "COMPOSITE" #Option "TVStandard" "PAL-B" #Option "DigitalVibrance" "0" #Option "TransparentIndex" "0" Option "CursorShadow" #Option "ConnectedMonitor" "CRT , TV" #Option "TVStandard" "PAL-B" #Option "Twinview" "TRUE" #Option "TwinViewOrientation" "Clone" #Option "SecondMonitorHorizSync" "30-50" #Option "SecondMonitorVertRefresh" "50" #Option "MetaModes" "800x600 , 800x600" Option "Nologo" Option "AllowGLXWithComposite" "true" #Option "RenderAccel" "true"EndSectionSection "Device" Identifier "S3 Trio" Driver "vga" BusID "PCI:0:7:0" Option "ShadowFB" "on" #Clocks 12.59EndSection# **********************************************************************# Screen sections# **********************************************************************# Any number of screen sections may be present. Each describes# the configuration of a single screen. A single specific screen section# may be specified from the X server command line with the "-screen"# option.Section "Screen" Identifier "Screen 1" Device "NVIDIA Geforce 4 MX4000 128MB" Monitor "LG L1710S FLATRON 17in" #Monitor "Monitor0" DefaultDepth 24 Subsection "Display" Depth 24 Modes "1280x1024" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 8 Modes "1280x1024" "800x600" "640x480" ViewPort 0 0 EndSubsectionEndSectionSection "Screen" Identifier "cga" Device "S3 Trio" Monitor "TTL CGA" DefaultDepth 1 Subsection "Display" Depth 1 Modes "640x292" ViewPort 0 0 EndSubsectionEndSection# **********************************************************************# ServerLayout sections.# **********************************************************************# Any number of ServerLayout sections may be present. Each describes# the way multiple screens are organised. A specific ServerLayout# section may be specified from the X server command line with the# "-layout" option. In the absence of this, the first section is used.# When now ServerLayout section is present, the first Screen section# is used alone.Section "ServerLayout"# The Identifier line must be present Identifier "Simple Layout"# Each Screen line specifies a Screen section name, and optionally# the relative position of other screens. The four names after# primary screen name are the screens to the top, bottom, left and right# of the primary screen. In this example, screen 2 is located to the# right of screen 1. Screen "Screen 1"# Each InputDevice line specifies an InputDevice section name and# optionally some options to specify the way the device is to be# used. Those options include "CorePointer", "CoreKeyboard" and# "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "cursor" "SendCoreEvents" InputDevice "stylus" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" InputDevice "Keyboard1" "CoreKeyboard"EndSectionSection "ServerLayout"# The Identifier line must be present Identifier "secondary"# Each Screen line specifies a Screen section name, and optionally# the relative position of other screens. The four names after# primary screen name are the screens to the top, bottom, left and right# of the primary screen. In this example, screen 2 is located to the# right of screen 1. Screen "cga"# Each InputDevice line specifies an InputDevice section name and# optionally some options to specify the way the device is to be# used. Those options include "CorePointer", "CoreKeyboard" and# "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard"EndSection# Section "DRI"# Mode 0666# EndSectionSection "Extensions"# Option "Composite"EndSection