Section "ServerLayout"
Identifier "Ikarus-DualHead"
Screen 0 "RightScreen" 0 0
Screen "LeftScreen" LeftOf "RightScreen"
InputDevice "LogitechDiNovoKeyboard" "CoreKeyboard"
InputDevice "LogitechMXLaserMouse" "CorePointer"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
# ModulePath "/usr/lib64/xorg/modules"
RgbPath "/usr/share/X11/rgb"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "On"
Option "XVideo" "On"
Option "RENDER" "On"
Option "DAMAGE" "On"
EndSection
Section "ServerFlags"
Option "AIGLX" "On"
Option "RandR" "On"
Option "Xinerama" "Off"
Option "AutoAddDevices" "False"
Option "blank time" "10" # 10 minutes
Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "DontZoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
# Set the basic blanking screen saver timeout.
# Set the DPMS timeouts. These are set here because they are global
# rather than screen-specific. These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.
# Option "EstimateSizesAggresively" "0"
# On some platform the server needs to estimate the sizes of PCI
EndSection
Section "InputDevice"
Identifier "LogitechDiNovoKeyboard"
Driver "evdev"
Option "Device" "/dev/input/by-id/usb-Logitech_Logitech_BT_Mini-Receiver_000761464915-event-kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "evdev"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
# Option "XkbVariant" "altgr-intl,qwerty" # for variants, have a look at e.g. /usr/share/X11/xkb/symbols/us
# Option "XkbOptions" "grp:menu_toggle,grp_led:caps" # toggling layouts with win-menu key
# Option "AutoRepeat" "500 5"
Option "evBits" "+1"
Option "keyBits" "~1-255 ~352-511"
Option "Pass" "3"
EndSection
Section "InputDevice"
Identifier "LogitechMXLaserMouse"
Driver "evdev"
Option "Device" "/dev/input/by-id/usb-Logitech_Logitech_BT_Mini-Receiver_000761464915-event-mouse"
EndSection
Section "Monitor"
Identifier "HPw2207-Right"
Option "VendorName" "Hewlett Packard"
Option "ModelName" "HP w2207"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "HPw2207-Left"
Option "VendorName" "Hewlett Packard"
Option "ModelName" "HP w2207"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI-3870-Primary"
Driver "fglrx"
BusID "PCI:1:0:0"
Option "DesktopSetup" "horizontal"
Option "SwapScreens" "On"
Option "UseFastTLS" "1"
Option "BackingStore" "True"
# Option "XAANoOffScreenPixmaps" "True"
# Option "Textured2D" "On"
# Option "TexturedXRender" "On"
# Option "TexturedVideo" "Off"
# Option "OpenGLOverlay" "Off"
# Option "VideoOverlay" "On"
EndSection
Section "Device"
Identifier "ATI-3870-Secondary"
Driver "fglrx"
BusID "PCI:1:0:0"
# Screen 1
EndSection
Section "Screen"
Identifier "RightScreen"
Device "ATI-3870-Primary"
Monitor "HPw2207-Right"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
Section "Screen"
Identifier "LeftScreen"
Device "ATI-3870-Secondary"
Monitor "HPw2207-Left"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
EndSubSection
EndSection