1. freevo_config.py# -*- coding: iso-8859-1 -*-# -----------------------------------------------------------------------# freevo_config.py - System configuration# -----------------------------------------------------------------------# $Id: freevo_config.py 6944 2005-01-09 10:45:55Z dischi $## Notes:# This file contains the freevo settings. To change the settings# you can edit this file, or better, put a file named local_conf.py# # in the same directory and add your changes there. E.g.: when# you # want a alsa as mplayer audio out, just put# "MPLAYER_AO_DEV = # 'alsa9'" in local_conf.py## How config files are loaded:# # [$freevo-bindir/ is the directory where the freevo start-script is # located (i.e. the "shipping copy dir"). This can be any directory, e.g. # the download directory or /usr/local] # # [$cwd/ is the directory the user started freevo from. This can be # $freevo-bindir/, or any other directory] # # 1) freevo.conf is not shipped, but it is required and must be generated # using ./configure before freevo can be used. # # 2) freevo.conf is searched for in ['$cwd/', '~/.freevo/', # '/etc/freevo/', $freevo-bindir/]. The first one found is loaded. # # 3) freevo_config.py is always loaded from $freevo-bindir/, it is not # supposed to be changed by the user. It has a format version number in # the format "MAJOR.MINOR", e.g. "2.3". The version number reflects the # config file format, *not* the Freevo version number. # # 4) local_conf.py is searched for in ['$cwd/', '~/.freevo', # '/etc/freevo/', $freevo-bindir/]. The first one found is loaded. It is # not a required file. The search is independent of where freevo.conf was # found. # # 5) The same logic as in 4) applies for local_skin.xml. # # 6) The version MAJOR numbers must match in freevo_config.py and # local_conf.py, otherwise it is an error. # # 7) The version MINOR number is used for backwards-compatible changes, # i.e. when new options are added that have reasonable default values. # # 8) A warning is issued if freevo_config.py.MINOR > local_conf.py.MINOR. # # 9) It is an error if local_conf.py.MINOR > freevo_config.py.MINOR since # the user most likely did not intend to use a recent local_conf.py with # an old Freevo installation. # # 10) There is a list of change descriptions in freevo_config.py, # one per MAJOR.MINOR change. The user is informed of what has # changed between his local_conf.py and the new freevo_config.py format if # they differ in version numbers.#### Developer Notes:# The CVS log isn't used here. Write changes directly in this file# to make it easier for the user. Make alos sure that you insert new# options also in local_conf.py.example## Todo:# o a nice configure or install script to ask these things# o different settings for MPG, AVI, VOB, etc## -----------------------------------------------------------------------## Changes:# o Generate ROM_DRIVES from /etc/fstab on startup# o Added FREEVO_CONF_VERSION and LOCAL_CONF_VERSION to keep the three# different files on sync### -----------------------------------------------------------------------# Freevo - A Home Theater PC framework# Copyright (C) 2002 Krister Lagerstrom, et al. # Please see the file freevo/Docs/CREDITS for a complete list of authors.## This program is free software; you can redistribute it and/or modify# it under the terms of the GNU General Public License as published by# the Free Software Foundation; either version 2 of the License, or# (at your option) any later version.## This program is distributed in the hope that it will be useful, but# WITHOUT ANY WARRANTY; without even the implied warranty of MER-# CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General# Public License for more details.## You should have received a copy of the GNU General Public License along# with this program; if not, write to the Free Software Foundation, Inc.,# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA## -----------------------------------------------------------------------import pluginfrom event import *######################################################################### If you want to change some things for your personal setup, please# write this in a file called local_conf.py, see that file for more info.######################################################################### Version information for the two config files. When the major version# of the config file doesn't match, Freevo won't start. If the minor version# is different, there will be only a warningLOCAL_CONF_VERSION=5.15# Description of changes in each new versionFREEVO_CONF_CHANGES = [ (2.0, '''Changed xmame_SDL to just xmame'''), ]LOCAL_CONF_CHANGES = [ (1.1, '''ROM_DRIVES are autodetected if left empty. Added AUDIO_RANDOM_PLAYLIST (default on). Added COVER_DIR for covers for files on CDs etc. Added AUDIO_COVER_REGEXP for selection of covers for music files. Changed MPlayer default args. Changed TV_SETTINGS to /dev/video0.'''), (2.0, '''Remote control config has changed from Freevo Python files to the standard Lirc program config files, see freevo_config.py for more info.'''), (2.1, '''Added MPLAYER_ARGS_AUDIOCD for audio cd playback settings.'''), (3.0, '''New skin engine. The new engine has no automatic TV overscan support, you need to set OSD_OVERSCAN_X and OSD_OVERSCAN_Y. There are also new variables for this engine: MAIN_MENU_ITEMS and FORCE_SKIN_LAYOUT. The games menu will be activated automaticly if setup.py found mame or snes'''), (3.1, '''Renamed TV_SHOW_IMAGE_DIR to TV_SHOW_DATA_DIR. This directory now can also contain fxd files with gloabl informations and mplayer options'''), (3.2, '''Removed MPLAYER_ARGS_* and added a hash MPLAYER_ARGS to set args for all different kinds of files. Also added MPLAYER_SOFTWARE_SCALER to use the software scaler for fast CPUs'''), (3.3, '''Added AUDIO_FORMAT_STRING to customize the audio item title generation'''), (3.4, '''Removed RC_MPLAYER_CMDS for video and audio. Set special handling (and other key mappings with the variable EVENTS. See event.py for possible events'''), (3.5, '''Added xine support (see xine section in freevo_config.py), MPLAYER_AUTOCROP for 16:9 tv sets, ONLY_SCAN_DATADIR to make freevo start faster and TVGUIDE_HOURS_PER_PAGE customize the tv guide'''), (3.7, '''Added USE_MEDIAID_TAG_NAMES as directory based variable and HIDE_UNUSABLE_DISCS to hide discs in the wrong menus and empty drives'''), (3.8, '''Restructured GAMES_ITEMS and added XMLTV_GRABBER and XMLTV_DAYS for the tv_grab helper script. Also added USE_NETWORK to deactivate everything that needs a network connection.'''), (3.9, '''Add MPLAYER_SET_AUDIO_DELAY to correct AV sync problems'''), (3.91, '''Add SKIN_FORCE_TEXTVIEW_STYLE and SKIN_MEDIAMENU_FORCE_TEXTVIEW to add more control when to switch to text view.'''), (4.00, '''Reworked the directory settings: MOVIE_PLAYLISTS and AUDIO_RANDOM_PLAYLIST are removed, the new variables to control a directory style are DIRECTORY_CREATE_PLAYLIST, DIRECTORY_ADD_PLAYLIST_FILES, DIRECTORY_ADD_RANDOM_PLAYLIST and DIRECTORY_AUTOPLAY_ITEMS. The directory updated now uses stat, set DIRECTORY_USE_STAT_FOR_CHANGES = 0 if you have problems with it.'''), (4.01, '''Removed SUFFIX_VIDEO_FILES and replaced it with SUFFIX_VIDEO_MPLAYER_FILES and SUFFIX_VIDEO_XINE_FILES. Use PREFERED_VIDEO_PLAYER to choose a prefered player.'''), (4.02, '''Added CHILDAPP_DEBUG to debug all kinds of childapps. MPLAYER_DEBUG will be removed soon. Renamed PREFERED_VIDEO_PLAYER to VIDEO_PREFERED_PLAYER and added AUDIO_PREFERED_PLAYER.'''), (4.03, '''Removed MOVIE_DATA_DIR and COVER_DIR. It has been replaved by the new virtual filesystem controlled by OVERLAY_DIR'''), (5.00, '''Changed some config variables. Use \'./freevo convert_config\' to convert your local_conf.py to change the variable names'''), (5.01, '''Add AUDIO_SHOW_VIDEOFILES to enable video files in the audio menu'''), (5.02, '''Add XINE_ARGS_DEF to set xine arguments and OSD_BUSYICON_TIMER to show a busy icon when the menu takes too much time building'''), (5.03, '''Add UMASK to set umask for files in vfs''' ), (5.04, '''SKIN_XML_FILE set to nothing as default, SKIN_START_LAYOUT is removed. When SKIN_XML_FILE is not set, the skin will remember the last settings'''), (5.05, '''Use MMPYTHON_CREATE_MD5_ID with current mmpython cvs to have a second way to generate the disc ids in case they are not unique on your system'''), (5.06, '''Add MEDIAINFO_USE_MEMORY. Setting this variable will keep all cache files in memory. Startup will be slower, but for large directories, this will speed up entering the dir'''), (5.07, '''Add MENU_ARROW_NAVIGATION to change navigation style. New one is default now. Also added OSD_EXTRA_FONT_PATH to search for fonts'''), (5.08, '''Change MENU_ARROW_NAVIGATION to old style and make blurr the new default skin. Also added RESTART_SYS_CMD, OSD_DIM_TEXT and OSD_UPDATE_COMPLETE_REDRAW.'''), (5.09, '''Add CACHE_IMAGES to turn off image caching. A new variable is IMAGEVIEWER_BLEND_MODE to control the blending effect in the image viewer'''), (5.11, '''Add IMAGEVIEWER_OSD to customize the osd and VIDEO_AUTOJOIN to auto join movies with more than one file'''), (5.12, '''Added TV_RECORD_SERVER_UID to set the uid for the recordserver and TV_RECORDFILE_SUFFIX for the suffix. If your TV_RECORDFILE_MASK contains the suffix, please remove it here'''), (5.13, '''Added TV_RECORD_SERVER_GID to set the gid for the recordserver. If you use TV_RECORD_SERVER_UID, the gui _must_ match one of the users gids''' ), (5.14, '''Add IMAGEVIEWER_DURATION for auto slideshows''' ), (5.15, '''Add two variables for mplayer post processing: MPLAYER_VF_INTERLACED and MPLAYER_VF_PROGRESSIVE''' ) ]# NOW check if freevo.conf is up-to-date. An older version may break the next# stepsFREEVO_CONF_VERSIONif int(str(CONF.version).split('.')[0]) != \ int(str(FREEVO_CONF_VERSION).split('.')[0]): print "\nERROR: The version information in freevo_config.py does't" print 'match the version in %s.' % freevoconf print 'please rerun "freevo setup" to generate a new freevo.conf' print_config_changes(FREEVO_CONF_VERSION, CONF.version, FREEVO_CONF_CHANGES) sys.exit(1)if int(str(CONF.version).split('.')[1]) != \ int(str(FREEVO_CONF_VERSION).split('.')[1]): print 'WARNING: freevo_config.py was changed, please rerun "freevo setup"' print_config_changes(FREEVO_CONF_VERSION, CONF.version, FREEVO_CONF_CHANGES)# ======================================================================# General freevo settings:# ======================================================================AUDIO_DEVICE = '/dev/dsp' # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?AUDIO_INPUT_DEVICE = '/dev/dsp1' # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?MAJOR_AUDIO_CTRL = 'VOL' # Freevo takes control over one audio ctrl # 'VOL', 'PCM' 'OGAIN' etc.CONTROL_ALL_AUDIO = 1 # Should Freevo take complete control of audioMAX_VOLUME = 90 # Set what you want maximum volume level to be.DEFAULT_VOLUME = 40 # Set default volume level.TV_IN_VOLUME = 60 # Set this to your preferred level 0-100.VCR_IN_VOLUME = 90 # If you use different input from TVDEV_MIXER = '/dev/mixer' # mixer device START_FULLSCREEN_X = 0 # Start in fullscreen mode if using x11 or xv.CONFIRM_SHUTDOWN = 1 # ask before shutdown## Physical ROM drives, multiple ones can be specified# by adding comma-seperated and quoted entries.## Format [ ('mountdir1', 'devicename1', 'displayed name1'),# ('mountdir2', 'devicename2', 'displayed name2'), ...]## Set to None to autodetect drives in during startup from /etc/fstab,# set to [] to disable rom drive support at all#ROM_DRIVES = None## hide discs from the wrong menu (e.g. VCDs in audio menu) and empty discs#HIDE_UNUSABLE_DISCS = 1 ## Attempt to set the speed of the ROM drive. A good value for keeping the# drive silent while playing movies is 8.#ROM_SPEED = 0 SHUTDOWN_SYS_CMD = 'shutdown -h now' # set this to 'sudo shutdown -h now' if # you don't have the permissions to # shutdownRESTART_SYS_CMD = 'shutdown -r now' # like SHUTDOWN_SYS_CMD, only for rebootENABLE_SHUTDOWN_SYS = 0 # Performs a whole system shutdown at SHUTDOWN! # For standalone boxes.## You can add more keybindings by adding them to the correct hash. # e.g. If you want to send 'contrast -100' to mplayer by pressing the '1' key, # just add the following line: ## EVENTS['video']['1'] = Event(VIDEO_SEND_MPLAYER_CMD, arg='contrast -100')## See src/event.py for a list of all possible events.EVENTS = { 'menu' : MENU_EVENTS, 'tvmenu' : TVMENU_EVENTS, 'input' : INPUT_EVENTS, 'tv' : TV_EVENTS, 'video' : VIDEO_EVENTS, 'dvd' : DVD_EVENTS, # only used by xine 'vcd' : VCD_EVENTS, # only used by xine 'audio' : AUDIO_EVENTS, 'games' : GAMES_EVENTS, 'image' : IMAGE_EVENTS, 'image_zoom' : IMAGE_ZOOM_EVENTS, 'global' : GLOBAL_EVENTS }## Use arrow keys for back and select (alternate way of navigating)#MENU_ARROW_NAVIGATION = 0## Keymap to map keyboard keys to event strings. You can also add new keys# here, e.g. KEYMAP[key.K_x] = 'SUBTITLE'. The K_-names are defined by pygame.#KEYMAP = DEFAULT_KEYMAP## Use Internet resources to fetch information?# For example, Freevo can use CDDB for album information,# the IMDB movie database for movie info, and Amazon for cover searches. # Set this to 0 if your computer isn't connected to a network.#USE_NETWORK = 1## HOST_ALIVE_CHECK tests if the given host is online.# Will be used to avoid extremely long automounter timeouts.#HOST_ALIVE_CHECK = 'ping -c 1 -W 1 %s > /dev/null 2>&1'## store output of started processes for debug#CHILDAPP_DEBUG = 0## Directory location to save files when the normal filesystem# doesn't allow saving. This directory can save covers and fxd files# for read only filesystems like ROM drives. Set this variable to your# old MOVIE_DATA_DIR if you have one. It needs to be set to a directory# Freevo can write to.#if os.environ.has_key('HOME') and os.environ['HOME']: OVERLAY_DIR = os.path.join(os.environ['HOME'], '.freevo/vfs')else: OVERLAY_DIR = os.path.join(FREEVO_CACHEDIR, 'vfs')## Umask setting for all files.# 022 means only the user has write access. If you share your Freevo# installation with different users, set this to 002#UMASK = 022## Suffix for playlist files#PLAYLIST_SUFFIX = [ 'm3u' ]## Use md5 in mmpython to create unique disc ids. Enable this if you have# problems with different discs having the same id.#MMPYTHON_CREATE_MD5_ID = 0## Keep metadata in memory# Setting this variable will keep all cache files in memory. Startup will be# slower, but for large directories, this will speed up the display.# 0 = Only keep current dir in memory. Use this if you have too much data# and not enough RAM# 1 = Once loaded, keep cachefile for directory in memory# 2 = Load all cachefiles on startup## WARNING: you should not run 'freevo cache' when freevo is running.#MEDIAINFO_USE_MEMORY = 1## Cache images. This uses a lot of disc space but it's a huge speed# enhancement. The images will be cached in OVERLAY_DIR#CACHE_IMAGES = 1# ======================================================================# Plugins:# ======================================================================# Remove undesired plugins by setting plugin.remove(code). # You can also use the name to remove a plugin. But if you do that, # all instances of this plugin will be removed.## Examples:# plugin.remove(plugin_tv) or# plugin.remove('tv') will remove the tv module from the main menu# plugin.remove(rom_plugins['image']) will remove the rom drives from the# image main menu,# plugin.remove('rom_drives.rom_items') will remove the rom drives from all# menus# Items in the main menu.plugin.activate('tv', level=10)plugin.activate('video', level=20)plugin.activate('audio', level=30)plugin.activate('image', level=40)plugin.activate('shutdown', level=50)if CONF.xmame or CONF.snes: plugin.activate('games', level=45)# ROM drive support# autostarter when inserting roms while Freevo is in the MAIN MENUplugin.activate('rom_drives.autostart')# add the rom drives to each sub main menurom_plugins = {}for t in ('video', 'audio', 'image', 'games'): rom_plugins[t] = plugin.activate('rom_drives.rom_items', type=t, level=50)# mixerplugin.activate('mixer')# add imdb search to the video item menuplugin.activate('video.imdb')# list of regexp to be ignored on a disc labelIMDB_REMOVE_FROM_LABEL = ('season[\._ -][0-9]+', 'disc[\._ -][0-9]+', 'd[\._ -][0-9]+', 'german')# list of words to ignore when searching based on a filenameIMDB_REMOVE_FROM_SEARCHSTRING = ('the', 'a')# When searching for a movie title in imdb, should the result be# autoaccepted if it is only one hit?# 0 = show menu even if it is only one hit (gives you an opportunity to cancel)# 1 = autoacceptIMDB_AUTOACCEPT_SINGLE_HIT = True# delete file in menuplugin.activate('file_ops', level=20)# use mplayer for video playpackplugin.activate('video.mplayer')# use mplayer for audio playpackplugin.activate('audio.mplayer')# make it possible to detach the playerplugin.activate('audio.detach', level=20)plugin.activate('audio.detachbar')# use mplayer for tv# to use tvtime, put the following two lines in your local_conf.py:# plugin.remove('tv.mplayer')# plugin.activate('tv.tvtime')plugin.activate('tv.mplayer')# control an external tv tuner using irsend or another command# to use this you must reassign plugin_external_tuner in local_conf.py:# plugin_external_tuner = plugin.activate('tv.irsend_generic',# args=('...', '...', ))# Please see each irsend plugin for individual arguments and be sure to# alter VIDEO_GROUPS to tell a VideoGroup to use it (tuner_type='external').plugin_external_tuner = 0# support for settings bookmarks (key RECORD) while playing. Also# auto bookmarking when playback is stoppedplugin.activate('video.bookmarker', level=0)# show some messages on the screenplugin.activate('tiny_osd')# For recording tv## generic_record plugin needs VCR_CMD to be set correctlyplugin_record = plugin.activate('tv.generic_record')## Use ivtv_record instead if you have an ivtv based card (PVR-250/350)# and want freevo to do everthing for you. TV_SETTINGS must be set # correctly. To use you need to set the following two lines:## plugin.remove('tv.generic_record')# plugin_record = plugin.activate('tv.ivtv_record')# TV menu plugin to view scheduled recordingsplugin.activate('tv.scheduled_recordings')# TV menu plugin to view and edit favoritesplugin.activate('tv.view_favorites')# TV menu plugin to manually schedule recordingsplugin.activate('tv.manual_record')## Enable this for joystick support:# plugin.activate('joy')# ======================================================================# Freevo directory settings:# ======================================================================# You can change all this variables in the folder.fxd on a per folder# basis## Example:# <freevo># <folder title="Title of the directory" img-cover="nice-cover.png"># <setvar name="directory_autoplay_single_item" val="0"/># <info># <content>A small description of the directory</content># </info># </folder># </freevo>## Should directories sorted by date instead of filename?# 0 = No, always sort by filename.# 1 = Yes, sort by date# 2 = No, don't sory by date for normal directories, # but sort by date for TV_RECORD_DIR.#DIRECTORY_SORT_BY_DATE = 2## Should directory items be sorted in reverse order?#DIRECTORY_REVERSE_SORT = 0## Should we use "smart" sorting?# Smart sorting ignores the word "The" in item names.#DIRECTORY_SMART_SORT = 0## Should Freevo autoplay an item if only one item is in the directory?#DIRECTORY_AUTOPLAY_SINGLE_ITEM = 1## Force the skin to use a specific layout number. -1 == no force. The layout# toggle with DISPLAY will be disabled#DIRECTORY_FORCE_SKIN_LAYOUT = -1## Format string for the audio item names. ## Possible strings:# a = artist, n = tracknumber, t = title, y = year, f = filename## Example:# This will show the title and the track number:# DIRECTORY_AUDIO_FORMAT_STRING = '%(n)s - %(t)s'#DIRECTORY_AUDIO_FORMAT_STRING = '%(t)s'## Use media id tags to generate the name of the item. This should be# enabled all the time. It should only be disabled for directories with # broken tags.#DIRECTORY_USE_MEDIAID_TAG_NAMES = 1## The following settings determine which features are available for# which media types.## If you set this variable in a folder.fxd, the value is 1 (enabled)# or 0 (disabled).# # Examples:# To enable autoplay for audio and image files:# DIRECTORY_AUTOPLAY_ITEMS = [ 'audio', 'image' ]# To disable autoplay entirely:# DIRECTORY_AUTOPLAY_ITEMS = []## Make all items a playlist. So when one is finished, the next one will# start. It's also possible to browse through the list with UP and DOWN#DIRECTORY_CREATE_PLAYLIST = [ 'audio', 'image' ]## Add playlist files ('m3u') to the directory#DIRECTORY_ADD_PLAYLIST_FILES = [ 'audio', 'image' ]## Add the item 'Random Playlist' to the directory#DIRECTORY_ADD_RANDOM_PLAYLIST = [ 'audio' ]## Make 'Play' not 'Browse' the default action when only items and not# subdirectories are in the directory#DIRECTORY_AUTOPLAY_ITEMS = [ ]# ======================================================================# Freevo movie settings:# ======================================================================## Where the movie files can be found.# This is a list of items (e.g. directories, fxd files). The items themselves# can also be a list of (title, file)## Example: VIDEO_ITEMS = [ ('action movies', '/files/movies/action'),# ('funny stuff', '/files/movies/comedy') ]## Some people access movies on a different machine using an automounter.# To avoid timeouts, you can specify the machine name in the directory# to check if the machine is alive first# Directory myserver:/files/server-stuff will show the item for the# directory /files/server-stuff if the computer myserver is alive.#VIDEO_ITEMS = None## Directory containing images for tv shows. A tv show maches the regular# expression VIDEO_SHOW_REGEXP, e.g. "Name 3x10 - Title". If an image# name.(png|jpg) (lowercase) is in this directory, it will be taken as cover# image#VIDEO_SHOW_DATA_DIR = None## The list of filename suffixes that are used to match the files that# are played wih MPlayer.# VIDEO_MPLAYER_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'wmv', 'bin', 'rm', 'divx', 'ogm', 'vob', 'asf', 'm2v', 'm2p', 'mp4', 'viv', 'nuv', 'mov', 'iso', 'nsv', 'mkv', 'ts' ]## The list of filename suffixes that are used to match the files that# are played wih Xine.# VIDEO_XINE_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'rm', 'divx', 'ogm', 'asf', 'm2v', 'm2p', 'mp4', 'mov', 'cue', 'ts', 'iso', 'vob' ]## Preferred video player#VIDEO_PREFERED_PLAYER = 'mplayer'## Only scan OVERLAY_DIR and VIDEO_SHOW_DATA_DIR for fxd files containing# information about a disc. If you only have the fxd files for discs in# one of this directories (and subdirectories), set this to 1, it will# speed up startup, 0 may be needed if you have fxd files with disc links# in your normal movie tree.#VIDEO_ONLY_SCAN_DATADIR = 1## try to detect a movie with more than one file and join them as one# item#VIDEO_AUTOJOIN = 1## try to find out if deinterlacing is needed or not#VIDEO_INTERLACING = 1# ======================================================================# Freevo audio settings:# ======================================================================## Where the Audio (mp3, ogg) files can be found.# This is a list of items (e.g. directories, fxd files). The items itself# can also be a list of (title, file)## To add webradio support, add fxd/webradio.fxd to this list#AUDIO_ITEMS = None## The list of filename suffixes that are used to match the files that# are played as audio.# AUDIO_SUFFIX = [ 'mp3', 'ogg', 'wav','m4a', 'wma', 'aac', 'flac', 'mka','ac3' ]## Regular expression used to recognize filenames which are likely to be # covers for an album ## This will match front.jpg and cover-f.jpg, but not back.jpg nor cover-b.jpg#AUDIO_COVER_REGEXP = 'front|-f'## Preferred audio player#AUDIO_PREFERED_PLAYER = 'mplayer'## Show video files in the audio menu (for music-videos)#AUDIO_SHOW_VIDEOFILES = False# ======================================================================# Freevo image viewer settings:# ======================================================================## Where image files can be found.# This is a list of items (e.g. directories, fxd files). The items itself# can also be a list of (title, file)#IMAGE_ITEMS = None## The list of filename suffixes that are used to match the files that# are used for the image viewer.# IMAGE_SUFFIX = [ 'jpg','gif','png', 'jpeg','bmp','tiff','psd' ]# The viewer now supports a new type of menu entry, a slideshow file.# It also has the slideshow alarm signal handler for automated shows.# It uses a new configuration option:IMAGE_SSHOW_SUFFIX = [ 'ssr' ]## Mode of the blending effect in the image viewer between two images# Possible values are:## None: no blending# -1 random effect# 0 alpha blending# 1 wipe effect#IMAGEVIEWER_BLEND_MODE = -1## What information to display by pressing DISPLAY.# You can add as many lists as you want and the viewer will toggle# between no osd and the lists.## Warning: this list may change in future versions of Freevo to support# nice stuff like line breaks.#IMAGEVIEWER_OSD = [ # First OSD info [ (_('Title')+': ', 'name'), (_('Description')+': ','description'), (_('Author')+': ', 'author') ], # Second OSD info [ (_('Title')+': ', 'name'), (_('Date')+': ' , 'date'), ('W:', 'width'), ('H:', 'height'), (_('Model')+': ', 'hardware'), (_('Software')+': ', 'software') ] ]## Default duration for images in a playlist. If set to 0, you need# to press a button to get to the next image, a value > 0 is the time# in seconds for an auto slideshow#IMAGEVIEWER_DURATION = 0## use exif thumbnail your thumbnail review. The quality is lower but# it's much faster#IMAGE_USE_EXIF_THUMBNAIL = 1# ======================================================================# Freevo games settings:# ======================================================================## MAME is an emulator for old arcade video games. It supports almost# 2000 different games! The actual emulator is not included in Freevo,# you'll need to download and install it separately. The main MAME# website is at http://www.mame.net, but the version that is used here# is at http://x.mame.net since the regular MAME is for Windows.## SNES stands for Super Nintendo Entertainment System. Freevo relies# on other programs that are not included in Freevo to play these games.# # NEW GAMES SYSTEM :# =================# The GAMES_ITEMS structure is now build as follows :# <NAME>, <FOLDER>, (<TYPE>, <COMMAND_PATH>, <COMMAND_ARGS>, <IMAGE_PATH>, \# [<FILE_SUFFIX_FOR_GENERIC>])# where :# - <TYPE> : Internal game types (MAME or SNES) or# generic one (GENERIC)# - <COMMAND_PATH> : Emulator command# - <COMMAND_ARGS> : Arguments for the emulator# - <IMAGE_PATH> : Optionnal path to the picture# - <FILE_SUFFIX_FOR_GENERIC> : If the folder use the GENERIC# type, then you must specify here# the file suffix used by the emulator# GAMES_ITEMS = [ ('MAME', '/home/media/games/xmame/roms', # ('MAME', '/usr/local/bin/xmame.SDL', '-fullscreen -modenumber 6', # '/home/media/games/xmame/shots', None)),# ('SUPER NINTENDO', '/home/media/games/snes/roms', # ('SNES', '/usr/local/bin/zsnes', '-m -r 3 -k 100 -cs -u', '', None )),# ('Visual Boy Advance', '/home/media/games/vba/roms/',# ('GENERIC', '/usr/local/vba/VisualBoyAdvance', ' ', '', [ 'gba' ] )),# ('MEGADRIVE', '/home/media/games/megadrive/roms', # ('GENESIS', '/usr/local/bin/generator-svgalib', '', '', '' )) ]GAMES_ITEMS = None## These settings are used for the MAME arcade emulator:## Priority of the game process# 0 = Don't change the priority# >0 - Lower priority# <0 - Higher priority#GAMES_NICE = -20# # MAME cache directory#GAMES_MAME_CACHE = '%s/romlist-%s.pickled' % (FREEVO_CACHEDIR, os.getuid())# ======================================================================# Freevo SKIN settings:# ======================================================================## Skin file that contains the actual skin code. This is imported# from skin.py#SKIN_MODULE = 'main'## XML file for the skin. If SKIN_XML_FILE is set, this skin will be# used, otherwise the skin will rememeber the last choosen skin.#SKIN_XML_FILE = ''SKIN_DEFAULT_XML_FILE = 'blurr'## Select a way when to switch to text view even if a image menu is there# # 1 = Force text view when all items have the same image and there are no# directories# 2 = Ignore the directories, always switch to text view when all images# are the same#SKIN_FORCE_TEXTVIEW_STYLE = 1## Force text view for the media menu# (The media menu is the first menu displayed for video, audio, images # and games). #SKIN_MEDIAMENU_FORCE_TEXTVIEW = 0# ======================================================================# Freevo OSD settings:# ======================================================================## OSD default font. It is only used for debug/error stuff, not regular skinning.#OSD_DEFAULT_FONTNAME = 'Vera.ttf'OSD_DEFAULT_FONTSIZE = 18## System Path to search for fonts not included in the Freevo distribution#OSD_EXTRA_FONT_PATH = [ '/usr/X11R6/lib/X11/fonts/truetype/' ]## Font aliases # All names must be lowercase! All alternate fonts must be in './share/fonts/'#OSD_FONT_ALIASES = { 'arial_bold.ttf' : 'VeraBd.ttf' }## Number of seconds to wait until the busy icon is shown in the menu.# Busy icon can also be shown right away when there is more than a certain# number of files in a directory.# # Set this to None to disable this.# (seconds, files)#OSD_BUSYICON_TIMER = (0.7, 200)## Execute a script on OSD startup.#OSD_SDL_EXEC_AFTER_STARTUP = ""## Execute a script on OSD close.#OSD_SDL_EXEC_AFTER_CLOSE = ""OSD_OVERSCAN_X = 0OSD_OVERSCAN_Y = 0# Exec a script after the osd startup. Matrox G400 users who wants to# use the framebuffer and have a PAL tv may set this to# './matrox_g400/mga_pal_768x576.sh' OSD_SDL_EXEC_AFTER_STARTUP=''if CONF.display == 'mga': OSD_SDL_EXEC_AFTER_STARTUP='%s %s %s' % (os.path.join(CONTRIB_DIR, 'fbcon/mgafb'), CONF.tv, CONF.geometry) OSD_SDL_EXEC_AFTER_CLOSE='%s restore' % os.path.join(CONTRIB_DIR, 'fbcon/mgafb') OSD_OVERSCAN_X = 20 OSD_OVERSCAN_Y = 10if CONF.display in ( 'directfb', 'dfbmga' ): OSD_OVERSCAN_X = 50 OSD_OVERSCAN_Y = 50if CONF.display == 'dxr3': OSD_OVERSCAN_X = 65 OSD_OVERSCAN_Y = 45## Stop the osd before playing a movie with xine or mplayer. Some output# devices need this. After playback, the osd will be restored#OSD_STOP_WHEN_PLAYING = 0if CONF.display in ( 'directfb', 'dfbmga', 'dxr3', 'dga' ): OSD_STOP_WHEN_PLAYING = 1## Dim text that doesn't fit instead of using ellipses. #OSD_DIM_TEXT = 1## Make a complete screen redraw every time. This is necessary sometimes#OSD_UPDATE_COMPLETE_REDRAW = 0if CONF.display in ( 'dxr3', 'dga' ): OSD_UPDATE_COMPLETE_REDRAW = 1# ======================================================================# Freevo remote control settings:# ======================================================================## Location of the lircrc file## For remote control support, Freevo needs a lircrc file, like this:## begin# prog = freevo# button = select# config = SELECT# end## Check contrib/lirc for examples and helpers/freevo2lirc.pl for a converter# script.#LIRCRC = '/etc/freevo/lircrc'## Set the Joy device to 0 to disable, 1 for js0, 2 for js1, etc...# Supports as many buttons as your controller has,# but make sure there is a corresponding entry in JOY_CMDS.# You will also need to plugin.activate('joy').# FYI: new kernels use /dev/input/jsX, but joy.py will fall back on /dev/jsX#JOY_DEV = 0JOY_CMDS = { 'up' : 'UP', 'down' : 'DOWN', 'left' : 'LEFT', 'right' : 'RIGHT', 'button 1' : 'PLAY', 'button 2' : 'PAUSE', 'button 3' : 'STOP', 'button 4' : 'ENTER', }# ======================================================================# TVtime settings:# ======================================================================## Location of the TV time program# Default: Use the value in freevo.conf# TVTIME_CMD = CONF.tvtime# ======================================================================# MPlayer settings:# ======================================================================MPLAYER_CMD = CONF.mplayerMPLAYER_AO_DEV = 'oss:/dev/dsp' # e.g.: oss,sdl,alsa, see mplayer docsif CONF.display == 'x11': MPLAYER_VO_DEV = 'xv,sdl,x11,' # X11 drivers in order of preferenceelse: MPLAYER_VO_DEV = CONF.display # e.g.: x11,mga,fbdev, see mplayer docsMPLAYER_VO_DEV_OPTS = '' # e.g.: ':some_var=vcal'DVD_LANG_PREF = 'en,se,no' # Order of preferred languages on DVD.DVD_SUBTITLE_PREF = '' # Order of preferred subtitles on DVD.# Priority of mplayer process. 0 is unchanged, <0 is higher prio, >0 lower prio.# prio <0 has no effect unless run as root.MPLAYER_NICE = -20 if CONF.display in ( 'directfb', 'dfbmga' ): MPLAYER_ARGS_DEF = ('-autosync 100 -nolirc ' + '-autoq 100 -fs ')else: MPLAYER_ARGS_DEF = (('-autosync 100 -nolirc -autoq 100 -screenw %s ' + '-screenh %s -fs') % (CONF.width, CONF.height))## Mplayer options to use the software scaler. If your CPU is fast enough, you# might try a software scaler. You can disable it later for some larger files# with the mplayer option '-nosws'. If you have -framedrop or -hardframedrop# as mplayer option, the software scaler will also not be used.# A good value for this variable is:# MPLAYER_SOFTWARE_SCALER = "-subfont-text-scale 5 -fs -sws 2 -vf scale=%s:-3,"\# "expand=%s:%s " % ( CONF.width, CONF.width, CONF.height )# older versions of mplayer may need# MPLAYER_SOFTWARE_SCALER = '-xy %s -sws 2 -vop scale:-1:-1:-1:100' % CONF.width#MPLAYER_SOFTWARE_SCALER = ''## Mplayer arguments for different media formats. (eg DVDs, CDs, AVI files, etc)# Uses a default value if nothing else matches.#MPLAYER_ARGS = { 'dvd' : '-cache 8192', 'vcd' : '-cache 4096', 'cd' : '-cache 1024 -cdda speed=2', 'tv' : '-nocache', 'ivtv' : '-cache 8192', 'dvb' : '-cache 1024', 'avi' : '-cache 5000 -idx', 'rm' : '-cache 5000 -forceidx', 'rmvb' : '-cache 5000 -forceidx', 'webcam' : 'tv:// -tv driver=v4l:width=352:height=288:outfmt=yuy2:device=/dev/video2', 'default': '-cache 5000' }## Number of seconds before seek value times out. This is used when# seeking a specified number of minutes into a movie. If you make# a mistake or change your mind, the seek value will timeout after# this many seconds.#MPLAYER_SEEK_TIMEOUT = 8## Autocrop files when playing. This is useful for files in 4:3 with black# bars on a 16:9 tv#MPLAYER_AUTOCROP = 0## Try to set correct 'delay' and 'mc' values for mplayer based on the delay# from mmpython. ## This should correct av sync problems with mplayer for some files, but # may also break things. (I don't know, that's why it's disabled by default). # WARNING: When seeking, the playback is out of sync for some seconds! #MPLAYER_SET_AUDIO_DELAY = 0## Mplayer video filter for interlaced or progressive videos. If you have# a slow pc, do not use post processing# MPLAYER_VF_INTERLACED = ''# MPLAYER_VF_PROGRESSIVE = 'pp=fd'# For pal and dvb-t recordings, the following looks good# MPLAYER_VF_INTERLACED = 'pp=md/de,phase=U'#MPLAYER_VF_INTERLACED = 'pp=de/fd'MPLAYER_VF_PROGRESSIVE = 'pp=de'# ======================================================================# Xine settings:# ======================================================================# You need xine-ui version greater 0.9.21 to use the all the features# of the xine pluginXINE_COMMAND = ''if CONF.display in ('mga', 'fbdev') and CONF.fbxine: XINE_VO_DEV = 'vidixfb' XINE_COMMAND = CONF.fbxineif CONF.display == 'dxr3' and CONF.fbxine: XINE_VO_DEV = 'dxr3' XINE_COMMAND = CONF.fbxineif CONF.display == 'x11' and CONF.xine: XINE_VO_DEV = 'xv' XINE_COMMAND = '%s --hide-gui -pq -g -B --geometry %sx%s+0+0 --no-splash' % \ (CONF.xine, CONF.width, CONF.height)XINE_ARGS_DEF = '--no-lirc --post=pp:quality=10;expand'XINE_AO_DEV = 'oss' # alsa or ossif XINE_COMMAND: plugin.activate('video.xine')if CONF.fbxine: plugin.activate('audio.xine')# ======================================================================# Freevo TV settings:# ======================================================================## This is where recorded video is written.## XXX the path doesn't work from the www cgi scripts!TV_RECORD_DIR = None## Watching TV## XXX You must change this to fit your local conditions!## TV_SETTINGS = 'NORM INPUT CHANLIST DEVICE'## NORM: ntsc, pal, secam# INPUT: television, composite1# CHANLIST: One of the following:## us-bcast, us-cable, us-cable-hrc, japan-bcast, japan-cable, europe-west,# europe-east, italy, newzealand, australia, ireland, france, china-bcast,# southafrica, argentina, canada-cable, russia## DEVICE: Usually /dev/video0, but might be /dev/video1 instead for multiple# boards.## FreeBSD uses the Brooktree TV-card driver, not V4L.#if os.uname()[0] == 'FreeBSD': TV_DRIVER = 'bsdbt848' TV_DEVICE = '/dev/bktr0' TV_INPUT = 1else: TV_DRIVER = 'v4l' TV_DEVICE = '/dev/video0' TV_INPUT = 0# Additional options to pass to mplayer in TV mode.# For example, TV_OPTS = '-vop pp=ci' would turn on deinterlacing.TV_OPTS = ''TV_SETTINGS = '%s television %s %s' % (CONF.tv, CONF.chanlist, TV_DEVICE)TV_CHANNEL_PROG = './chchan %(channel)s %(norm)s %(freqtable)s'TV_DATEFORMAT = '%e-%b' # Day-Month: 11-JunTV_TIMEFORMAT = '%H:%M' # Hour-Minute 14:05TV_DATETIMEFORMAT = '%A %b %d %I:%M %p' # Thursday September 24 8:54 am# This is the filename format for files recorded using Freevo.# You can use any of the strftime variables in it, provided you# put two '%%' at the beginning. # # Some examples:# %%A - Full weekday name.# %%H - Hour (24-hour clock) as a decimal number [00,23].# %%M - Minute as a decimal number [00,59].# %%m - Month as a decimal number [01,12].# %%d - Day of the month as a decimal number [01,31].# %%p - Locale's equivalent of either AM or PM.# # More can be found at: http://www.python.org/doc/current/lib/module-time.htmlTV_RECORDFILE_MASK = '%%m-%%d %%H.%%M %(progname)s - %(title)s'TV_RECORDFILE_SUFFIX = '.avi'# if using the persitant recordserverTV_RECORD_SCHEDULE = '%s/record_schedule.xml' % FREEVO_CACHEDIRTV_RECORD_SERVER_IP = 'localhost'TV_RECORD_SERVER_PORT = 18001# If the recordserver runs as root, set the uid to the given one# after startup. The gui must also match one of the users group idsTV_RECORD_SERVER_UID = 0TV_RECORD_SERVER_GID = 0# start every recording X minutes before scheduled,# and stop X minutes after scheduled - default to zero minutes.# This must be a value in seconds although at the moment only has# the percision of one minute.TV_RECORD_PADDING = 0 * 60if os.uname()[0] == 'FreeBSD': # FreeBSD's bsdbt848 TV driver doesn't support audio settings? VCR_AUDIO = ''else: VCR_AUDIO = (':adevice=%s' % AUDIO_DEVICE + ':audiorate=32000' + # 44100 for better sound ':forceaudio:forcechan=1:' + # Forced mono for bug in my driver 'buffersize=64') # 64MB capture buffer, change?# TV capture size for viewing and recording. Max 768x480 for NTSC,# 768x576 for PAL. Set lower if you have a slow computer!## For the 'tvtime' TV viewing application, only the horizontal size is used.# Set the horizontal size to 400 or 480 if you have a slow (~500MHz) computer,# it still looks OK, and the picture will not be as jerky.# The vertical size is always either fullscreen or 480/576 (NTSC/PAL)# for tvtime.TV_VIEW_SIZE = (640, 480)TV_REC_SIZE = (320, 240) # Default for slower computers# Input formats for viewing and recording. The format affect viewing# and recording performance. It is specific to your hardware, so read# the MPlayer docs and experiment with mplayer to see which one fits# your computer best.TV_VIEW_OUTFMT = 'yuy2' # Better quality, slower on pure FB/X11TV_REC_OUTFMT = 'yuy2'# PRE and POST recording commands. Set these to a runnable command if# you wish to have special mixer settings or video post processing.VCR_PRE_REC = NoneVCR_POST_REC = None# XXX Please see the mencoder docs for more info about the settings# XXX below. Some stuff must be changed (adevice), others probably# XXX should be ("Change"), or could be in some cases ("change?")VCR_CMD = (CONF.mencoder + ' ' + 'tv:// ' + # New mplayer requires this. '-tv driver=%s:input=%d' % (TV_DRIVER, TV_INPUT) + ':norm=%s' % CONF.tv + ':channel=%(channel)s' + # Filled in by Freevo ':chanlist=%s' % CONF.chanlist + ':width=%d:height=%d' % (TV_REC_SIZE[0], TV_REC_SIZE[1]) + ':outfmt=%s' % TV_REC_OUTFMT + ':device=%s' % TV_DEVICE + VCR_AUDIO + # set above ' -ovc lavc -lavcopts ' + # Mencoder lavcodec video codec 'vcodec=mpeg4' + # lavcodec mpeg-4 ':vbitrate=1200:' + # Change lower/higher, bitrate 'keyint=30 ' + # Keyframe every 10 secs, change? '-oac mp3lame -lameopts ' + # Use Lame for MP3 encoding, must be enabled in mencoder! 'br=128:cbr:mode=3 ' + # MP3 const. bitrate, 128 kbit/s '-ffourcc divx ' + # Force 'divx' ident, better compat. '-endpos %(seconds)s ' + # only mencoder uses this so do it here. '-o %(filename)s') # Filled in by Freevo## Settings for ivtv based cards such as the WinTV PVR-250/350.## XXX TODO: Add descriptions and valid settings for each option.# bitrate in bps# stream type# Options are: 0 (mpeg2_ps), 1 (mpeg2_ts), 2 (mpeg1), 3 (mpeg2_pes_av),# 5 (mpeg2_pes_v), 7 (mpeg2_pes_a), 10 (dvd)TV_IVTV_OPTIONS = { 'input' : 4, 'resolution' : '720x480', 'aspect' : 2, 'audio_bitmask' : 233, 'bframes' : 3, 'bitrate_mode' : 1, 'bitrate' : 4000000, 'bitrate_peak' : 4000000, 'dnr_mode' : 0, 'dnr_spatial' : 0, 'dnr_temporal' : 0, 'dnr_type' : 0, 'framerate' : 0, 'framespergop' : 15, 'gop_closure' : 1, 'pulldown' : 0, 'stream_type' : 10,}## FREQUENCY_TABLE - This is only used when Freevo changes the channel natively.# This is only the case if you are using V4L2 and any of the following plugins:# timeshift, ivtv_record, ivtv_basic_tv.# For the standard frequancy tables see src/tv/freq.py. To add your own just # replace tuner_id in the following example with a valid tuner id (ie: '5' or# 'BBC1') and a frequency in KHz. You may have as many entries as you like,# anything here will simply override a corresponding entry in your standard# frequency table and you can also have entries here that are not present in# there.FREQUENCY_TABLE = { 'tuner_id' : 55250,}# VIDEO_GROUPS is a new setting to handle multiple arbitrary groups of devices# for viewing or recording. It will be possible to have different Freevo# channels use different Video Groups.VIDEO_GROUPS = [ VideoGroup(vdev=TV_DEVICE, adev=AUDIO_DEVICE, input_type='tuner', tuner_norm=CONF.tv, tuner_chanlist=CONF.chanlist, desc='Default Video Group', recordable=True),]## TV Channels. This list contains a mapping from the displayed channel name# to the actual channel name as used by the TV watching application.# The display name must match the names from the XMLTV guide,# and the TV channel name must be what the tuner expects (usually a number).## The TV menu is supposed to be supported by the XMLTV application for# up to date listings, but can be used without it to just display# the available channels.## This list also determines the order in which the channels are displayed!# N.B.: You must delete the XMLTV cache file (e.g. /var/cache/freevo/TV.xml.pickled)# if you make changes here and restart!## Format: [('xmltv channel id', 'freevo display name', 'tv channel name'), ...]## If this variable is set to None (default), Freevo will try to auto-detect# the channel list based on the xmltv file. This doesn't work for all# xmltv grabber, e.g. the German list doesn't contain station lists. In this# case Freevo will output the possible list for you to add them manually.## If auto-detection doesn't work or you want to edit the list, run# freevo tv_grab -query.## Setting this variable to [] will deactivate the tv guide. If you don't have# a tv card, you may also want to add plugin.remove('tv') to remove the whole# tv menu.## All channels listed here will be displayed on the TV menu, even if they're# not present in the XMLTV listing.# ## Timedependent channels:## The TV_CHANNELS-list can look like this:## TV_CHANNELS = [('21', 'SVT1', 'E5'),# ('22', 'SVT2', 'E3'),# ('26', 'TV3', 'E10'),# ('27', 'TV4', 'E6'),# ('10', 'Kanal 5', 'E7'),# ('60', 'Fox Kids', 'E8', ('1234567','0600','1659')),# ('16', 'TV6', 'E8', ('1234567','1700','2359'), # ('1234567','0000','0300')),# ('14', 'MTV Europe', 'E11') ]## As you can see the list takes optional tuples:# ( 'DAYS', 'START','END')## 1234567 in days means all days.# 12345 would mean monday to friday.## It will display "Fox Kids" from 06:00 to 16:59 and "TV6" from 17:00 to 03:00. # 03:00 to 06:00 it won't be displayed at all.#TV_CHANNELS = None# Program to grab xmltv listings. To get a grabber, you need to download# xmltv. A possible value for users in the USA is tv_grab_na# Use the tv_grab helper to grab the listings and cache them. Start# 'freevo tv_grab --help' for more informations.XMLTV_GRABBER = ''# If you want to run tv_sort on your listings add the path to tv_sort here.# tv_sort will make sure all your programs have proper stop times, otherwise# programs might get cut off at midnight.XMLTV_SORT = ''# Number of days the grabber should getXMLTV_DAYS = 3# ======================================================================# Freevo builtin WWW server settings:# ======================================================================## To activate the built in web server, please activate the www plugin# in your local_conf.py:## plugin.activate('www')## Web server port number. 80 is the standard port, but is often# taken already by apache, and cannot be used unless the server# runs as root. Port 8080 is the default, change to 80 if# needed.#WWW_PORT = 8080## Username / Password combinations to login to the web interface.# These should be overridden in local_conf.py# # WWW_USERS = { "user1" : "changeme", # "optional" : "changeme2" }#WWW_USERS = { 0 : 0 }## Divide the TV guide into intervals of this length (in minutes)#WWW_GUIDE_INTERVAL = 30## Precision for TV guide (in minutes)#WWW_GUIDE_PRECISION = 5## Show this many blocks at once#WWW_GUIDE_COLS = 6WWW_STYLESHEET = 'styles/main.css'WWW_JAVASCRIPT = 'scripts/display_prog-head.js'# ======================================================================# Internal stuff, you shouldn't change anything here unless you know# what you are doing# ======================================================================## Config for xml support in the movie browser# the regexp has to be with ([0-9]|[0-9][0-9]) so we can get the numbers#VIDEO_SHOW_REGEXP = "s?([0-9]|[0-9][0-9])[xe]([0-9]|[0-9][0-9])[^0-9]"## Remote control daemon. The server is in the Freevo main application,# and the client is a standalone application in rc_client/#ENABLE_NETWORK_REMOTE = 0REMOTE_CONTROL_HOST = '127.0.0.1'REMOTE_CONTROL_PORT = 16310## XMLTV File## This is the XMLTV file that can be optionally used for TV listings#if os.uname()[0] == 'FreeBSD': XMLTV_FILE = OS_CACHEDIR + '/xmltv/TV.xml'else: XMLTV_FILE = '/tmp/TV.xml'## XML TV Logo Location## Use the "makelogos.py" script to download all the# Station logos into a directory. And then put the path# to those logos hereif os.path.isdir(OS_CACHEDIR + '/xmltv/logos'): TV_LOGOS = OS_CACHEDIR + '/xmltv/logos'else: if not os.path.isdir('/tmp/freevo/xmltv/logos'): os.makedirs('/tmp/freevo/xmltv/logos') TV_LOGOS = '/tmp/freevo/xmltv/logos'LOCALE='latin-1'FREEVO_EVENTHANDLER_SANDBOX = 1# Use stat to check if a directory has changed. This is faster and should# work with all kinds of filesystems. No need to change it I guessDIRECTORY_USE_STAT_FOR_CHANGES = True# Set to 1 to log mplayer output to ./mplayer_stdout.log and# ./mplayer_stderr.logMPLAYER_DEBUG = 0TIME_DEBUG = 02.local_conf.py# -*- coding: iso-8859-1 -*-# -----------------------------------------------------------------------# freevo_config.py - System configuration# -----------------------------------------------------------------------# $Id: freevo_config.py 6944 2005-01-09 10:45:55Z dischi $## Notes:# This file contains the freevo settings. To change the settings# you can edit this file, or better, put a file named local_conf.py# # in the same directory and add your changes there. E.g.: when# you # want a alsa as mplayer audio out, just put# "MPLAYER_AO_DEV = # 'alsa9'" in local_conf.py## How config files are loaded:# # [$freevo-bindir/ is the directory where the freevo start-script is # located (i.e. the "shipping copy dir"). This can be any directory, e.g. # the download directory or /usr/local] # # [$cwd/ is the directory the user started freevo from. This can be # $freevo-bindir/, or any other directory] # # 1) freevo.conf is not shipped, but it is required and must be generated # using ./configure before freevo can be used. # # 2) freevo.conf is searched for in ['$cwd/', '~/.freevo/', # '/etc/freevo/', $freevo-bindir/]. The first one found is loaded. # # 3) freevo_config.py is always loaded from $freevo-bindir/, it is not # supposed to be changed by the user. It has a format version number in # the format "MAJOR.MINOR", e.g. "2.3". The version number reflects the # config file format, *not* the Freevo version number. # # 4) local_conf.py is searched for in ['$cwd/', '~/.freevo', # '/etc/freevo/', $freevo-bindir/]. The first one found is loaded. It is # not a required file. The search is independent of where freevo.conf was # found. # # 5) The same logic as in 4) applies for local_skin.xml. # # 6) The version MAJOR numbers must match in freevo_config.py and # local_conf.py, otherwise it is an error. # # 7) The version MINOR number is used for backwards-compatible changes, # i.e. when new options are added that have reasonable default values. # # 8) A warning is issued if freevo_config.py.MINOR > local_conf.py.MINOR. # # 9) It is an error if local_conf.py.MINOR > freevo_config.py.MINOR since # the user most likely did not intend to use a recent local_conf.py with # an old Freevo installation. # # 10) There is a list of change descriptions in freevo_config.py, # one per MAJOR.MINOR change. The user is informed of what has # changed between his local_conf.py and the new freevo_config.py format if # they differ in version numbers.#### Developer Notes:# The CVS log isn't used here. Write changes directly in this file# to make it easier for the user. Make alos sure that you insert new# options also in local_conf.py.example## Todo:# o a nice configure or install script to ask these things# o different settings for MPG, AVI, VOB, etc## -----------------------------------------------------------------------## Changes:# o Generate ROM_DRIVES from /etc/fstab on startup# o Added FREEVO_CONF_VERSION and LOCAL_CONF_VERSION to keep the three# different files on sync### -----------------------------------------------------------------------# Freevo - A Home Theater PC framework# Copyright (C) 2002 Krister Lagerstrom, et al. # Please see the file freevo/Docs/CREDITS for a complete list of authors.## This program is free software; you can redistribute it and/or modify# it under the terms of the GNU General Public License as published by# the Free Software Foundation; either version 2 of the License, or# (at your option) any later version.## This program is distributed in the hope that it will be useful, but# WITHOUT ANY WARRANTY; without even the implied warranty of MER-# CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General# Public License for more details.## You should have received a copy of the GNU General Public License along# with this program; if not, write to the Free Software Foundation, Inc.,# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA## -----------------------------------------------------------------------import pluginfrom event import *######################################################################### If you want to change some things for your personal setup, please# write this in a file called local_conf.py, see that file for more info.######################################################################### Version information for the two config files. When the major version# of the config file doesn't match, Freevo won't start. If the minor version# is different, there will be only a warningLOCAL_CONF_VERSION=5.15# Description of changes in each new versionFREEVO_CONF_CHANGES = [ (2.0, '''Changed xmame_SDL to just xmame'''), ]LOCAL_CONF_CHANGES = [ (1.1, '''ROM_DRIVES are autodetected if left empty. Added AUDIO_RANDOM_PLAYLIST (default on). Added COVER_DIR for covers for files on CDs etc. Added AUDIO_COVER_REGEXP for selection of covers for music files. Changed MPlayer default args. Changed TV_SETTINGS to /dev/video0.'''), (2.0, '''Remote control config has changed from Freevo Python files to the standard Lirc program config files, see freevo_config.py for more info.'''), (2.1, '''Added MPLAYER_ARGS_AUDIOCD for audio cd playback settings.'''), (3.0, '''New skin engine. The new engine has no automatic TV overscan support, you need to set OSD_OVERSCAN_X and OSD_OVERSCAN_Y. There are also new variables for this engine: MAIN_MENU_ITEMS and FORCE_SKIN_LAYOUT. The games menu will be activated automaticly if setup.py found mame or snes'''), (3.1, '''Renamed TV_SHOW_IMAGE_DIR to TV_SHOW_DATA_DIR. This directory now can also contain fxd files with gloabl informations and mplayer options'''), (3.2, '''Removed MPLAYER_ARGS_* and added a hash MPLAYER_ARGS to set args for all different kinds of files. Also added MPLAYER_SOFTWARE_SCALER to use the software scaler for fast CPUs'''), (3.3, '''Added AUDIO_FORMAT_STRING to customize the audio item title generation'''), (3.4, '''Removed RC_MPLAYER_CMDS for video and audio. Set special handling (and other key mappings with the variable EVENTS. See event.py for possible events'''), (3.5, '''Added xine support (see xine section in freevo_config.py), MPLAYER_AUTOCROP for 16:9 tv sets, ONLY_SCAN_DATADIR to make freevo start faster and TVGUIDE_HOURS_PER_PAGE customize the tv guide'''), (3.7, '''Added USE_MEDIAID_TAG_NAMES as directory based variable and HIDE_UNUSABLE_DISCS to hide discs in the wrong menus and empty drives'''), (3.8, '''Restructured GAMES_ITEMS and added XMLTV_GRABBER and XMLTV_DAYS for the tv_grab helper script. Also added USE_NETWORK to deactivate everything that needs a network connection.'''), (3.9, '''Add MPLAYER_SET_AUDIO_DELAY to correct AV sync problems'''), (3.91, '''Add SKIN_FORCE_TEXTVIEW_STYLE and SKIN_MEDIAMENU_FORCE_TEXTVIEW to add more control when to switch to text view.'''), (4.00, '''Reworked the directory settings: MOVIE_PLAYLISTS and AUDIO_RANDOM_PLAYLIST are removed, the new variables to control a directory style are DIRECTORY_CREATE_PLAYLIST, DIRECTORY_ADD_PLAYLIST_FILES, DIRECTORY_ADD_RANDOM_PLAYLIST and DIRECTORY_AUTOPLAY_ITEMS. The directory updated now uses stat, set DIRECTORY_USE_STAT_FOR_CHANGES = 0 if you have problems with it.'''), (4.01, '''Removed SUFFIX_VIDEO_FILES and replaced it with SUFFIX_VIDEO_MPLAYER_FILES and SUFFIX_VIDEO_XINE_FILES. Use PREFERED_VIDEO_PLAYER to choose a prefered player.'''), (4.02, '''Added CHILDAPP_DEBUG to debug all kinds of childapps. MPLAYER_DEBUG will be removed soon. Renamed PREFERED_VIDEO_PLAYER to VIDEO_PREFERED_PLAYER and added AUDIO_PREFERED_PLAYER.'''), (4.03, '''Removed MOVIE_DATA_DIR and COVER_DIR. It has been replaved by the new virtual filesystem controlled by OVERLAY_DIR'''), (5.00, '''Changed some config variables. Use \'./freevo convert_config\' to convert your local_conf.py to change the variable names'''), (5.01, '''Add AUDIO_SHOW_VIDEOFILES to enable video files in the audio menu'''), (5.02, '''Add XINE_ARGS_DEF to set xine arguments and OSD_BUSYICON_TIMER to show a busy icon when the menu takes too much time building'''), (5.03, '''Add UMASK to set umask for files in vfs''' ), (5.04, '''SKIN_XML_FILE set to nothing as default, SKIN_START_LAYOUT is removed. When SKIN_XML_FILE is not set, the skin will remember the last settings'''), (5.05, '''Use MMPYTHON_CREATE_MD5_ID with current mmpython cvs to have a second way to generate the disc ids in case they are not unique on your system'''), (5.06, '''Add MEDIAINFO_USE_MEMORY. Setting this variable will keep all cache files in memory. Startup will be slower, but for large directories, this will speed up entering the dir'''), (5.07, '''Add MENU_ARROW_NAVIGATION to change navigation style. New one is default now. Also added OSD_EXTRA_FONT_PATH to search for fonts'''), (5.08, '''Change MENU_ARROW_NAVIGATION to old style and make blurr the new default skin. Also added RESTART_SYS_CMD, OSD_DIM_TEXT and OSD_UPDATE_COMPLETE_REDRAW.'''), (5.09, '''Add CACHE_IMAGES to turn off image caching. A new variable is IMAGEVIEWER_BLEND_MODE to control the blending effect in the image viewer'''), (5.11, '''Add IMAGEVIEWER_OSD to customize the osd and VIDEO_AUTOJOIN to auto join movies with more than one file'''), (5.12, '''Added TV_RECORD_SERVER_UID to set the uid for the recordserver and TV_RECORDFILE_SUFFIX for the suffix. If your TV_RECORDFILE_MASK contains the suffix, please remove it here'''), (5.13, '''Added TV_RECORD_SERVER_GID to set the gid for the recordserver. If you use TV_RECORD_SERVER_UID, the gui _must_ match one of the users gids''' ), (5.14, '''Add IMAGEVIEWER_DURATION for auto slideshows''' ), (5.15, '''Add two variables for mplayer post processing: MPLAYER_VF_INTERLACED and MPLAYER_VF_PROGRESSIVE''' ) ]# NOW check if freevo.conf is up-to-date. An older version may break the next# stepsFREEVO_CONF_VERSIONif int(str(CONF.version).split('.')[0]) != \ int(str(FREEVO_CONF_VERSION).split('.')[0]): print "\nERROR: The version information in freevo_config.py does't" print 'match the version in %s.' % freevoconf print 'please rerun "freevo setup" to generate a new freevo.conf' print_config_changes(FREEVO_CONF_VERSION, CONF.version, FREEVO_CONF_CHANGES) sys.exit(1)if int(str(CONF.version).split('.')[1]) != \ int(str(FREEVO_CONF_VERSION).split('.')[1]): print 'WARNING: freevo_config.py was changed, please rerun "freevo setup"' print_config_changes(FREEVO_CONF_VERSION, CONF.version, FREEVO_CONF_CHANGES)# ======================================================================# General freevo settings:# ======================================================================AUDIO_DEVICE = '/dev/dsp' # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?AUDIO_INPUT_DEVICE = '/dev/dsp1' # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?MAJOR_AUDIO_CTRL = 'VOL' # Freevo takes control over one audio ctrl # 'VOL', 'PCM' 'OGAIN' etc.CONTROL_ALL_AUDIO = 1 # Should Freevo take complete control of audioMAX_VOLUME = 90 # Set what you want maximum volume level to be.DEFAULT_VOLUME = 40 # Set default volume level.TV_IN_VOLUME = 60 # Set this to your preferred level 0-100.VCR_IN_VOLUME = 90 # If you use different input from TVDEV_MIXER = '/dev/mixer' # mixer device START_FULLSCREEN_X = 0 # Start in fullscreen mode if using x11 or xv.CONFIRM_SHUTDOWN = 1 # ask before shutdown## Physical ROM drives, multiple ones can be specified# by adding comma-seperated and quoted entries.## Format [ ('mountdir1', 'devicename1', 'displayed name1'),# ('mountdir2', 'devicename2', 'displayed name2'), ...]## Set to None to autodetect drives in during startup from /etc/fstab,# set to [] to disable rom drive support at all#ROM_DRIVES = None## hide discs from the wrong menu (e.g. VCDs in audio menu) and empty discs#HIDE_UNUSABLE_DISCS = 1 ## Attempt to set the speed of the ROM drive. A good value for keeping the# drive silent while playing movies is 8.#ROM_SPEED = 0 SHUTDOWN_SYS_CMD = 'shutdown -h now' # set this to 'sudo shutdown -h now' if # you don't have the permissions to # shutdownRESTART_SYS_CMD = 'shutdown -r now' # like SHUTDOWN_SYS_CMD, only for rebootENABLE_SHUTDOWN_SYS = 0 # Performs a whole system shutdown at SHUTDOWN! # For standalone boxes.## You can add more keybindings by adding them to the correct hash. # e.g. If you want to send 'contrast -100' to mplayer by pressing the '1' key, # just add the following line: ## EVENTS['video']['1'] = Event(VIDEO_SEND_MPLAYER_CMD, arg='contrast -100')## See src/event.py for a list of all possible events.EVENTS = { 'menu' : MENU_EVENTS, 'tvmenu' : TVMENU_EVENTS, 'input' : INPUT_EVENTS, 'tv' : TV_EVENTS, 'video' : VIDEO_EVENTS, 'dvd' : DVD_EVENTS, # only used by xine 'vcd' : VCD_EVENTS, # only used by xine 'audio' : AUDIO_EVENTS, 'games' : GAMES_EVENTS, 'image' : IMAGE_EVENTS, 'image_zoom' : IMAGE_ZOOM_EVENTS, 'global' : GLOBAL_EVENTS }## Use arrow keys for back and select (alternate way of navigating)#MENU_ARROW_NAVIGATION = 0## Keymap to map keyboard keys to event strings. You can also add new keys# here, e.g. KEYMAP[key.K_x] = 'SUBTITLE'. The K_-names are defined by pygame.#KEYMAP = DEFAULT_KEYMAP## Use Internet resources to fetch information?# For example, Freevo can use CDDB for album information,# the IMDB movie database for movie info, and Amazon for cover searches. # Set this to 0 if your computer isn't connected to a network.#USE_NETWORK = 1## HOST_ALIVE_CHECK tests if the given host is online.# Will be used to avoid extremely long automounter timeouts.#HOST_ALIVE_CHECK = 'ping -c 1 -W 1 %s > /dev/null 2>&1'## store output of started processes for debug#CHILDAPP_DEBUG = 0## Directory location to save files when the normal filesystem# doesn't allow saving. This directory can save covers and fxd files# for read only filesystems like ROM drives. Set this variable to your# old MOVIE_DATA_DIR if you have one. It needs to be set to a directory# Freevo can write to.#if os.environ.has_key('HOME') and os.environ['HOME']: OVERLAY_DIR = os.path.join(os.environ['HOME'], '.freevo/vfs')else: OVERLAY_DIR = os.path.join(FREEVO_CACHEDIR, 'vfs')## Umask setting for all files.# 022 means only the user has write access. If you share your Freevo# installation with different users, set this to 002#UMASK = 022## Suffix for playlist files#PLAYLIST_SUFFIX = [ 'm3u' ]## Use md5 in mmpython to create unique disc ids. Enable this if you have# problems with different discs having the same id.#MMPYTHON_CREATE_MD5_ID = 0## Keep metadata in memory# Setting this variable will keep all cache files in memory. Startup will be# slower, but for large directories, this will speed up the display.# 0 = Only keep current dir in memory. Use this if you have too much data# and not enough RAM# 1 = Once loaded, keep cachefile for directory in memory# 2 = Load all cachefiles on startup## WARNING: you should not run 'freevo cache' when freevo is running.#MEDIAINFO_USE_MEMORY = 1## Cache images. This uses a lot of disc space but it's a huge speed# enhancement. The images will be cached in OVERLAY_DIR#CACHE_IMAGES = 1# ======================================================================# Plugins:# ======================================================================# Remove undesired plugins by setting plugin.remove(code). # You can also use the name to remove a plugin. But if you do that, # all instances of this plugin will be removed.## Examples:# plugin.remove(plugin_tv) or# plugin.remove('tv') will remove the tv module from the main menu# plugin.remove(rom_plugins['image']) will remove the rom drives from the# image main menu,# plugin.remove('rom_drives.rom_items') will remove the rom drives from all# menus# Items in the main menu.plugin.activate('tv', level=10)plugin.activate('video', level=20)plugin.activate('audio', level=30)plugin.activate('image', level=40)plugin.activate('shutdown', level=50)if CONF.xmame or CONF.snes: plugin.activate('games', level=45)# ROM drive support# autostarter when inserting roms while Freevo is in the MAIN MENUplugin.activate('rom_drives.autostart')# add the rom drives to each sub main menurom_plugins = {}for t in ('video', 'audio', 'image', 'games'): rom_plugins[t] = plugin.activate('rom_drives.rom_items', type=t, level=50)# mixerplugin.activate('mixer')# add imdb search to the video item menuplugin.activate('video.imdb')# list of regexp to be ignored on a disc labelIMDB_REMOVE_FROM_LABEL = ('season[\._ -][0-9]+', 'disc[\._ -][0-9]+', 'd[\._ -][0-9]+', 'german')# list of words to ignore when searching based on a filenameIMDB_REMOVE_FROM_SEARCHSTRING = ('the', 'a')# When searching for a movie title in imdb, should the result be# autoaccepted if it is only one hit?# 0 = show menu even if it is only one hit (gives you an opportunity to cancel)# 1 = autoacceptIMDB_AUTOACCEPT_SINGLE_HIT = True# delete file in menuplugin.activate('file_ops', level=20)# use mplayer for video playpackplugin.activate('video.mplayer')# use mplayer for audio playpackplugin.activate('audio.mplayer')# make it possible to detach the playerplugin.activate('audio.detach', level=20)plugin.activate('audio.detachbar')# use mplayer for tv# to use tvtime, put the following two lines in your local_conf.py:# plugin.remove('tv.mplayer')# plugin.activate('tv.tvtime')plugin.activate('tv.mplayer')# control an external tv tuner using irsend or another command# to use this you must reassign plugin_external_tuner in local_conf.py:# plugin_external_tuner = plugin.activate('tv.irsend_generic',# args=('...', '...', ))# Please see each irsend plugin for individual arguments and be sure to# alter VIDEO_GROUPS to tell a VideoGroup to use it (tuner_type='external').plugin_external_tuner = 0# support for settings bookmarks (key RECORD) while playing. Also# auto bookmarking when playback is stoppedplugin.activate('video.bookmarker', level=0)# show some messages on the screenplugin.activate('tiny_osd')# For recording tv## generic_record plugin needs VCR_CMD to be set correctlyplugin_record = plugin.activate('tv.generic_record')## Use ivtv_record instead if you have an ivtv based card (PVR-250/350)# and want freevo to do everthing for you. TV_SETTINGS must be set # correctly. To use you need to set the following two lines:## plugin.remove('tv.generic_record')# plugin_record = plugin.activate('tv.ivtv_record')# TV menu plugin to view scheduled recordingsplugin.activate('tv.scheduled_recordings')# TV menu plugin to view and edit favoritesplugin.activate('tv.view_favorites')# TV menu plugin to manually schedule recordingsplugin.activate('tv.manual_record')## Enable this for joystick support:# plugin.activate('joy')# ======================================================================# Freevo directory settings:# ======================================================================# You can change all this variables in the folder.fxd on a per folder# basis## Example:# <freevo># <folder title="Title of the directory" img-cover="nice-cover.png"># <setvar name="directory_autoplay_single_item" val="0"/># <info># <content>A small description of the directory</content># </info># </folder># </freevo>## Should directories sorted by date instead of filename?# 0 = No, always sort by filename.# 1 = Yes, sort by date# 2 = No, don't sory by date for normal directories, # but sort by date for TV_RECORD_DIR.#DIRECTORY_SORT_BY_DATE = 2## Should directory items be sorted in reverse order?#DIRECTORY_REVERSE_SORT = 0## Should we use "smart" sorting?# Smart sorting ignores the word "The" in item names.#DIRECTORY_SMART_SORT = 0## Should Freevo autoplay an item if only one item is in the directory?#DIRECTORY_AUTOPLAY_SINGLE_ITEM = 1## Force the skin to use a specific layout number. -1 == no force. The layout# toggle with DISPLAY will be disabled#DIRECTORY_FORCE_SKIN_LAYOUT = -1## Format string for the audio item names. ## Possible strings:# a = artist, n = tracknumber, t = title, y = year, f = filename## Example:# This will show the title and the track number:# DIRECTORY_AUDIO_FORMAT_STRING = '%(n)s - %(t)s'#DIRECTORY_AUDIO_FORMAT_STRING = '%(t)s'## Use media id tags to generate the name of the item. This should be# enabled all the time. It should only be disabled for directories with # broken tags.#DIRECTORY_USE_MEDIAID_TAG_NAMES = 1## The following settings determine which features are available for# which media types.## If you set this variable in a folder.fxd, the value is 1 (enabled)# or 0 (disabled).# # Examples:# To enable autoplay for audio and image files:# DIRECTORY_AUTOPLAY_ITEMS = [ 'audio', 'image' ]# To disable autoplay entirely:# DIRECTORY_AUTOPLAY_ITEMS = []## Make all items a playlist. So when one is finished, the next one will# start. It's also possible to browse through the list with UP and DOWN#DIRECTORY_CREATE_PLAYLIST = [ 'audio', 'image' ]## Add playlist files ('m3u') to the directory#DIRECTORY_ADD_PLAYLIST_FILES = [ 'audio', 'image' ]## Add the item 'Random Playlist' to the directory#DIRECTORY_ADD_RANDOM_PLAYLIST = [ 'audio' ]## Make 'Play' not 'Browse' the default action when only items and not# subdirectories are in the directory#DIRECTORY_AUTOPLAY_ITEMS = [ ]# ======================================================================# Freevo movie settings:# ======================================================================## Where the movie files can be found.# This is a list of items (e.g. directories, fxd files). The items themselves# can also be a list of (title, file)## Example: VIDEO_ITEMS = [ ('action movies', '/files/movies/action'),# ('funny stuff', '/files/movies/comedy') ]## Some people access movies on a different machine using an automounter.# To avoid timeouts, you can specify the machine name in the directory# to check if the machine is alive first# Directory myserver:/files/server-stuff will show the item for the# directory /files/server-stuff if the computer myserver is alive.#VIDEO_ITEMS = None## Directory containing images for tv shows. A tv show maches the regular# expression VIDEO_SHOW_REGEXP, e.g. "Name 3x10 - Title". If an image# name.(png|jpg) (lowercase) is in this directory, it will be taken as cover# image#VIDEO_SHOW_DATA_DIR = None## The list of filename suffixes that are used to match the files that# are played wih MPlayer.# VIDEO_MPLAYER_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'wmv', 'bin', 'rm', 'divx', 'ogm', 'vob', 'asf', 'm2v', 'm2p', 'mp4', 'viv', 'nuv', 'mov', 'iso', 'nsv', 'mkv', 'ts' ]## The list of filename suffixes that are used to match the files that# are played wih Xine.# VIDEO_XINE_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'rm', 'divx', 'ogm', 'asf', 'm2v', 'm2p', 'mp4', 'mov', 'cue', 'ts', 'iso', 'vob' ]## Preferred video player#VIDEO_PREFERED_PLAYER = 'mplayer'## Only scan OVERLAY_DIR and VIDEO_SHOW_DATA_DIR for fxd files containing# information about a disc. If you only have the fxd files for discs in# one of this directories (and subdirectories), set this to 1, it will# speed up startup, 0 may be needed if you have fxd files with disc links# in your normal movie tree.#VIDEO_ONLY_SCAN_DATADIR = 1## try to detect a movie with more than one file and join them as one# item#VIDEO_AUTOJOIN = 1## try to find out if deinterlacing is needed or not#VIDEO_INTERLACING = 1# ======================================================================# Freevo audio settings:# ======================================================================## Where the Audio (mp3, ogg) files can be found.# This is a list of items (e.g. directories, fxd files). The items itself# can also be a list of (title, file)## To add webradio support, add fxd/webradio.fxd to this list#AUDIO_ITEMS = None## The list of filename suffixes that are used to match the files that# are played as audio.# AUDIO_SUFFIX = [ 'mp3', 'ogg', 'wav','m4a', 'wma', 'aac', 'flac', 'mka','ac3' ]## Regular expression used to recognize filenames which are likely to be # covers for an album ## This will match front.jpg and cover-f.jpg, but not back.jpg nor cover-b.jpg#AUDIO_COVER_REGEXP = 'front|-f'## Preferred audio player#AUDIO_PREFERED_PLAYER = 'mplayer'## Show video files in the audio menu (for music-videos)#AUDIO_SHOW_VIDEOFILES = False# ======================================================================# Freevo image viewer settings:# ======================================================================## Where image files can be found.# This is a list of items (e.g. directories, fxd files). The items itself# can also be a list of (title, file)#IMAGE_ITEMS = None## The list of filename suffixes that are used to match the files that# are used for the image viewer.# IMAGE_SUFFIX = [ 'jpg','gif','png', 'jpeg','bmp','tiff','psd' ]# The viewer now supports a new type of menu entry, a slideshow file.# It also has the slideshow alarm signal handler for automated shows.# It uses a new configuration option:IMAGE_SSHOW_SUFFIX = [ 'ssr' ]## Mode of the blending effect in the image viewer between two images# Possible values are:## None: no blending# -1 random effect# 0 alpha blending# 1 wipe effect#IMAGEVIEWER_BLEND_MODE = -1## What information to display by pressing DISPLAY.# You can add as many lists as you want and the viewer will toggle# between no osd and the lists.## Warning: this list may change in future versions of Freevo to support# nice stuff like line breaks.#IMAGEVIEWER_OSD = [ # First OSD info [ (_('Title')+': ', 'name'), (_('Description')+': ','description'), (_('Author')+': ', 'author') ], # Second OSD info [ (_('Title')+': ', 'name'), (_('Date')+': ' , 'date'), ('W:', 'width'), ('H:', 'height'), (_('Model')+': ', 'hardware'), (_('Software')+': ', 'software') ] ]## Default duration for images in a playlist. If set to 0, you need# to press a button to get to the next image, a value > 0 is the time# in seconds for an auto slideshow#IMAGEVIEWER_DURATION = 0## use exif thumbnail your thumbnail review. The quality is lower but# it's much faster#IMAGE_USE_EXIF_THUMBNAIL = 1# ======================================================================# Freevo games settings:# ======================================================================## MAME is an emulator for old arcade video games. It supports almost# 2000 different games! The actual emulator is not included in Freevo,# you'll need to download and install it separately. The main MAME# website is at http://www.mame.net, but the version that is used here# is at http://x.mame.net since the regular MAME is for Windows.## SNES stands for Super Nintendo Entertainment System. Freevo relies# on other programs that are not included in Freevo to play these games.# # NEW GAMES SYSTEM :# =================# The GAMES_ITEMS structure is now build as follows :# <NAME>, <FOLDER>, (<TYPE>, <COMMAND_PATH>, <COMMAND_ARGS>, <IMAGE_PATH>, \# [<FILE_SUFFIX_FOR_GENERIC>])# where :# - <TYPE> : Internal game types (MAME or SNES) or# generic one (GENERIC)# - <COMMAND_PATH> : Emulator command# - <COMMAND_ARGS> : Arguments for the emulator# - <IMAGE_PATH> : Optionnal path to the picture# - <FILE_SUFFIX_FOR_GENERIC> : If the folder use the GENERIC# type, then you must specify here# the file suffix used by the emulator# GAMES_ITEMS = [ ('MAME', '/home/media/games/xmame/roms', # ('MAME', '/usr/local/bin/xmame.SDL', '-fullscreen -modenumber 6', # '/home/media/games/xmame/shots', None)),# ('SUPER NINTENDO', '/home/media/games/snes/roms', # ('SNES', '/usr/local/bin/zsnes', '-m -r 3 -k 100 -cs -u', '', None )),# ('Visual Boy Advance', '/home/media/games/vba/roms/',# ('GENERIC', '/usr/local/vba/VisualBoyAdvance', ' ', '', [ 'gba' ] )),# ('MEGADRIVE', '/home/media/games/megadrive/roms', # ('GENESIS', '/usr/local/bin/generator-svgalib', '', '', '' )) ]GAMES_ITEMS = None## These settings are used for the MAME arcade emulator:## Priority of the game process# 0 = Don't change the priority# >0 - Lower priority# <0 - Higher priority#GAMES_NICE = -20# # MAME cache directory#GAMES_MAME_CACHE = '%s/romlist-%s.pickled' % (FREEVO_CACHEDIR, os.getuid())# ======================================================================# Freevo SKIN settings:# ======================================================================## Skin file that contains the actual skin code. This is imported# from skin.py#SKIN_MODULE = 'main'## XML file for the skin. If SKIN_XML_FILE is set, this skin will be# used, otherwise the skin will rememeber the last choosen skin.#SKIN_XML_FILE = ''SKIN_DEFAULT_XML_FILE = 'blurr'## Select a way when to switch to text view even if a image menu is there# # 1 = Force text view when all items have the same image and there are no# directories# 2 = Ignore the directories, always switch to text view when all images# are the same#SKIN_FORCE_TEXTVIEW_STYLE = 1## Force text view for the media menu# (The media menu is the first menu displayed for video, audio, images # and games). #SKIN_MEDIAMENU_FORCE_TEXTVIEW = 0# ======================================================================# Freevo OSD settings:# ======================================================================## OSD default font. It is only used for debug/error stuff, not regular skinning.#OSD_DEFAULT_FONTNAME = 'Vera.ttf'OSD_DEFAULT_FONTSIZE = 18## System Path to search for fonts not included in the Freevo distribution#OSD_EXTRA_FONT_PATH = [ '/usr/X11R6/lib/X11/fonts/truetype/' ]## Font aliases # All names must be lowercase! All alternate fonts must be in './share/fonts/'#OSD_FONT_ALIASES = { 'arial_bold.ttf' : 'VeraBd.ttf' }## Number of seconds to wait until the busy icon is shown in the menu.# Busy icon can also be shown right away when there is more than a certain# number of files in a directory.# # Set this to None to disable this.# (seconds, files)#OSD_BUSYICON_TIMER = (0.7, 200)## Execute a script on OSD startup.#OSD_SDL_EXEC_AFTER_STARTUP = ""## Execute a script on OSD close.#OSD_SDL_EXEC_AFTER_CLOSE = ""OSD_OVERSCAN_X = 0OSD_OVERSCAN_Y = 0# Exec a script after the osd startup. Matrox G400 users who wants to# use the framebuffer and have a PAL tv may set this to# './matrox_g400/mga_pal_768x576.sh' OSD_SDL_EXEC_AFTER_STARTUP=''if CONF.display == 'mga': OSD_SDL_EXEC_AFTER_STARTUP='%s %s %s' % (os.path.join(CONTRIB_DIR, 'fbcon/mgafb'), CONF.tv, CONF.geometry) OSD_SDL_EXEC_AFTER_CLOSE='%s restore' % os.path.join(CONTRIB_DIR, 'fbcon/mgafb') OSD_OVERSCAN_X = 20 OSD_OVERSCAN_Y = 10if CONF.display in ( 'directfb', 'dfbmga' ): OSD_OVERSCAN_X = 50 OSD_OVERSCAN_Y = 50if CONF.display == 'dxr3': OSD_OVERSCAN_X = 65 OSD_OVERSCAN_Y = 45## Stop the osd before playing a movie with xine or mplayer. Some output# devices need this. After playback, the osd will be restored#OSD_STOP_WHEN_PLAYING = 0if CONF.display in ( 'directfb', 'dfbmga', 'dxr3', 'dga' ): OSD_STOP_WHEN_PLAYING = 1## Dim text that doesn't fit instead of using ellipses. #OSD_DIM_TEXT = 1## Make a complete screen redraw every time. This is necessary sometimes#OSD_UPDATE_COMPLETE_REDRAW = 0if CONF.display in ( 'dxr3', 'dga' ): OSD_UPDATE_COMPLETE_REDRAW = 1# ======================================================================# Freevo remote control settings:# ======================================================================## Location of the lircrc file## For remote control support, Freevo needs a lircrc file, like this:## begin# prog = freevo# button = select# config = SELECT# end## Check contrib/lirc for examples and helpers/freevo2lirc.pl for a converter# script.#LIRCRC = '/etc/freevo/lircrc'## Set the Joy device to 0 to disable, 1 for js0, 2 for js1, etc...# Supports as many buttons as your controller has,# but make sure there is a corresponding entry in JOY_CMDS.# You will also need to plugin.activate('joy').# FYI: new kernels use /dev/input/jsX, but joy.py will fall back on /dev/jsX#JOY_DEV = 0JOY_CMDS = { 'up' : 'UP', 'down' : 'DOWN', 'left' : 'LEFT', 'right' : 'RIGHT', 'button 1' : 'PLAY', 'button 2' : 'PAUSE', 'button 3' : 'STOP', 'button 4' : 'ENTER', }# ======================================================================# TVtime settings:# ======================================================================## Location of the TV time program# Default: Use the value in freevo.conf# TVTIME_CMD = CONF.tvtime# ======================================================================# MPlayer settings:# ======================================================================MPLAYER_CMD = CONF.mplayerMPLAYER_AO_DEV = 'oss:/dev/dsp' # e.g.: oss,sdl,alsa, see mplayer docsif CONF.display == 'x11': MPLAYER_VO_DEV = 'xv,sdl,x11,' # X11 drivers in order of preferenceelse: MPLAYER_VO_DEV = CONF.display # e.g.: x11,mga,fbdev, see mplayer docsMPLAYER_VO_DEV_OPTS = '' # e.g.: ':some_var=vcal'DVD_LANG_PREF = 'en,se,no' # Order of preferred languages on DVD.DVD_SUBTITLE_PREF = '' # Order of preferred subtitles on DVD.# Priority of mplayer process. 0 is unchanged, <0 is higher prio, >0 lower prio.# prio <0 has no effect unless run as root.MPLAYER_NICE = -20 if CONF.display in ( 'directfb', 'dfbmga' ): MPLAYER_ARGS_DEF = ('-autosync 100 -nolirc ' + '-autoq 100 -fs ')else: MPLAYER_ARGS_DEF = (('-autosync 100 -nolirc -autoq 100 -screenw %s ' + '-screenh %s -fs') % (CONF.width, CONF.height))## Mplayer options to use the software scaler. If your CPU is fast enough, you# might try a software scaler. You can disable it later for some larger files# with the mplayer option '-nosws'. If you have -framedrop or -hardframedrop# as mplayer option, the software scaler will also not be used.# A good value for this variable is:# MPLAYER_SOFTWARE_SCALER = "-subfont-text-scale 5 -fs -sws 2 -vf scale=%s:-3,"\# "expand=%s:%s " % ( CONF.width, CONF.width, CONF.height )# older versions of mplayer may need# MPLAYER_SOFTWARE_SCALER = '-xy %s -sws 2 -vop scale:-1:-1:-1:100' % CONF.width#MPLAYER_SOFTWARE_SCALER = ''## Mplayer arguments for different media formats. (eg DVDs, CDs, AVI files, etc)# Uses a default value if nothing else matches.#MPLAYER_ARGS = { 'dvd' : '-cache 8192', 'vcd' : '-cache 4096', 'cd' : '-cache 1024 -cdda speed=2', 'tv' : '-nocache', 'ivtv' : '-cache 8192', 'dvb' : '-cache 1024', 'avi' : '-cache 5000 -idx', 'rm' : '-cache 5000 -forceidx', 'rmvb' : '-cache 5000 -forceidx', 'webcam' : 'tv:// -tv driver=v4l:width=352:height=288:outfmt=yuy2:device=/dev/video2', 'default': '-cache 5000' }## Number of seconds before seek value times out. This is used when# seeking a specified number of minutes into a movie. If you make# a mistake or change your mind, the seek value will timeout after# this many seconds.#MPLAYER_SEEK_TIMEOUT = 8## Autocrop files when playing. This is useful for files in 4:3 with black# bars on a 16:9 tv#MPLAYER_AUTOCROP = 0## Try to set correct 'delay' and 'mc' values for mplayer based on the delay# from mmpython. ## This should correct av sync problems with mplayer for some files, but # may also break things. (I don't know, that's why it's disabled by default). # WARNING: When seeking, the playback is out of sync for some seconds! #MPLAYER_SET_AUDIO_DELAY = 0## Mplayer video filter for interlaced or progressive videos. If you have# a slow pc, do not use post processing# MPLAYER_VF_INTERLACED = ''# MPLAYER_VF_PROGRESSIVE = 'pp=fd'# For pal and dvb-t recordings, the following looks good# MPLAYER_VF_INTERLACED = 'pp=md/de,phase=U'#MPLAYER_VF_INTERLACED = 'pp=de/fd'MPLAYER_VF_PROGRESSIVE = 'pp=de'# ======================================================================# Xine settings:# ======================================================================# You need xine-ui version greater 0.9.21 to use the all the features# of the xine pluginXINE_COMMAND = ''if CONF.display in ('mga', 'fbdev') and CONF.fbxine: XINE_VO_DEV = 'vidixfb' XINE_COMMAND = CONF.fbxineif CONF.display == 'dxr3' and CONF.fbxine: XINE_VO_DEV = 'dxr3' XINE_COMMAND = CONF.fbxineif CONF.display == 'x11' and CONF.xine: XINE_VO_DEV = 'xv' XINE_COMMAND = '%s --hide-gui -pq -g -B --geometry %sx%s+0+0 --no-splash' % \ (CONF.xine, CONF.width, CONF.height)XINE_ARGS_DEF = '--no-lirc --post=pp:quality=10;expand'XINE_AO_DEV = 'oss' # alsa or ossif XINE_COMMAND: plugin.activate('video.xine')if CONF.fbxine: plugin.activate('audio.xine')# ======================================================================# Freevo TV settings:# ======================================================================## This is where recorded video is written.## XXX the path doesn't work from the www cgi scripts!TV_RECORD_DIR = None## Watching TV## XXX You must change this to fit your local conditions!## TV_SETTINGS = 'NORM INPUT CHANLIST DEVICE'## NORM: ntsc, pal, secam# INPUT: television, composite1# CHANLIST: One of the following:## us-bcast, us-cable, us-cable-hrc, japan-bcast, japan-cable, europe-west,# europe-east, italy, newzealand, australia, ireland, france, china-bcast,# southafrica, argentina, canada-cable, russia## DEVICE: Usually /dev/video0, but might be /dev/video1 instead for multiple# boards.## FreeBSD uses the Brooktree TV-card driver, not V4L.#if os.uname()[0] == 'FreeBSD': TV_DRIVER = 'bsdbt848' TV_DEVICE = '/dev/bktr0' TV_INPUT = 1else: TV_DRIVER = 'v4l' TV_DEVICE = '/dev/video0' TV_INPUT = 0# Additional options to pass to mplayer in TV mode.# For example, TV_OPTS = '-vop pp=ci' would turn on deinterlacing.TV_OPTS = ''TV_SETTINGS = '%s television %s %s' % (CONF.tv, CONF.chanlist, TV_DEVICE)TV_CHANNEL_PROG = './chchan %(channel)s %(norm)s %(freqtable)s'TV_DATEFORMAT = '%e-%b' # Day-Month: 11-JunTV_TIMEFORMAT = '%H:%M' # Hour-Minute 14:05TV_DATETIMEFORMAT = '%A %b %d %I:%M %p' # Thursday September 24 8:54 am# This is the filename format for files recorded using Freevo.# You can use any of the strftime variables in it, provided you# put two '%%' at the beginning. # # Some examples:# %%A - Full weekday name.# %%H - Hour (24-hour clock) as a decimal number [00,23].# %%M - Minute as a decimal number [00,59].# %%m - Month as a decimal number [01,12].# %%d - Day of the month as a decimal number [01,31].# %%p - Locale's equivalent of either AM or PM.# # More can be found at: http://www.python.org/doc/current/lib/module-time.htmlTV_RECORDFILE_MASK = '%%m-%%d %%H.%%M %(progname)s - %(title)s'TV_RECORDFILE_SUFFIX = '.avi'# if using the persitant recordserverTV_RECORD_SCHEDULE = '%s/record_schedule.xml' % FREEVO_CACHEDIRTV_RECORD_SERVER_IP = 'localhost'TV_RECORD_SERVER_PORT = 18001# If the recordserver runs as root, set the uid to the given one# after startup. The gui must also match one of the users group idsTV_RECORD_SERVER_UID = 0TV_RECORD_SERVER_GID = 0# start every recording X minutes before scheduled,# and stop X minutes after scheduled - default to zero minutes.# This must be a value in seconds although at the moment only has# the percision of one minute.TV_RECORD_PADDING = 0 * 60if os.uname()[0] == 'FreeBSD': # FreeBSD's bsdbt848 TV driver doesn't support audio settings? VCR_AUDIO = ''else: VCR_AUDIO = (':adevice=%s' % AUDIO_DEVICE + ':audiorate=32000' + # 44100 for better sound ':forceaudio:forcechan=1:' + # Forced mono for bug in my driver 'buffersize=64') # 64MB capture buffer, change?# TV capture size for viewing and recording. Max 768x480 for NTSC,# 768x576 for PAL. Set lower if you have a slow computer!## For the 'tvtime' TV viewing application, only the horizontal size is used.# Set the horizontal size to 400 or 480 if you have a slow (~500MHz) computer,# it still looks OK, and the picture will not be as jerky.# The vertical size is always either fullscreen or 480/576 (NTSC/PAL)# for tvtime.TV_VIEW_SIZE = (640, 480)TV_REC_SIZE = (320, 240) # Default for slower computers# Input formats for viewing and recording. The format affect viewing# and recording performance. It is specific to your hardware, so read# the MPlayer docs and experiment with mplayer to see which one fits# your computer best.TV_VIEW_OUTFMT = 'yuy2' # Better quality, slower on pure FB/X11TV_REC_OUTFMT = 'yuy2'# PRE and POST recording commands. Set these to a runnable command if# you wish to have special mixer settings or video post processing.VCR_PRE_REC = NoneVCR_POST_REC = None# XXX Please see the mencoder docs for more info about the settings# XXX below. Some stuff must be changed (adevice), others probably# XXX should be ("Change"), or could be in some cases ("change?")VCR_CMD = (CONF.mencoder + ' ' + 'tv:// ' + # New mplayer requires this. '-tv driver=%s:input=%d' % (TV_DRIVER, TV_INPUT) + ':norm=%s' % CONF.tv + ':channel=%(channel)s' + # Filled in by Freevo ':chanlist=%s' % CONF.chanlist + ':width=%d:height=%d' % (TV_REC_SIZE[0], TV_REC_SIZE[1]) + ':outfmt=%s' % TV_REC_OUTFMT + ':device=%s' % TV_DEVICE + VCR_AUDIO + # set above ' -ovc lavc -lavcopts ' + # Mencoder lavcodec video codec 'vcodec=mpeg4' + # lavcodec mpeg-4 ':vbitrate=1200:' + # Change lower/higher, bitrate 'keyint=30 ' + # Keyframe every 10 secs, change? '-oac mp3lame -lameopts ' + # Use Lame for MP3 encoding, must be enabled in mencoder! 'br=128:cbr:mode=3 ' + # MP3 const. bitrate, 128 kbit/s '-ffourcc divx ' + # Force 'divx' ident, better compat. '-endpos %(seconds)s ' + # only mencoder uses this so do it here. '-o %(filename)s') # Filled in by Freevo## Settings for ivtv based cards such as the WinTV PVR-250/350.## XXX TODO: Add descriptions and valid settings for each option.# bitrate in bps# stream type# Options are: 0 (mpeg2_ps), 1 (mpeg2_ts), 2 (mpeg1), 3 (mpeg2_pes_av),# 5 (mpeg2_pes_v), 7 (mpeg2_pes_a), 10 (dvd)TV_IVTV_OPTIONS = { 'input' : 4, 'resolution' : '720x480', 'aspect' : 2, 'audio_bitmask' : 233, 'bframes' : 3, 'bitrate_mode' : 1, 'bitrate' : 4000000, 'bitrate_peak' : 4000000, 'dnr_mode' : 0, 'dnr_spatial' : 0, 'dnr_temporal' : 0, 'dnr_type' : 0, 'framerate' : 0, 'framespergop' : 15, 'gop_closure' : 1, 'pulldown' : 0, 'stream_type' : 10,}## FREQUENCY_TABLE - This is only used when Freevo changes the channel natively.# This is only the case if you are using V4L2 and any of the following plugins:# timeshift, ivtv_record, ivtv_basic_tv.# For the standard frequancy tables see src/tv/freq.py. To add your own just # replace tuner_id in the following example with a valid tuner id (ie: '5' or# 'BBC1') and a frequency in KHz. You may have as many entries as you like,# anything here will simply override a corresponding entry in your standard# frequency table and you can also have entries here that are not present in# there.FREQUENCY_TABLE = { 'tuner_id' : 55250,}# VIDEO_GROUPS is a new setting to handle multiple arbitrary groups of devices# for viewing or recording. It will be possible to have different Freevo# channels use different Video Groups.VIDEO_GROUPS = [ VideoGroup(vdev=TV_DEVICE, adev=AUDIO_DEVICE, input_type='tuner', tuner_norm=CONF.tv, tuner_chanlist=CONF.chanlist, desc='Default Video Group', recordable=True),]## TV Channels. This list contains a mapping from the displayed channel name# to the actual channel name as used by the TV watching application.# The display name must match the names from the XMLTV guide,# and the TV channel name must be what the tuner expects (usually a number).## The TV menu is supposed to be supported by the XMLTV application for# up to date listings, but can be used without it to just display# the available channels.## This list also determines the order in which the channels are displayed!# N.B.: You must delete the XMLTV cache file (e.g. /var/cache/freevo/TV.xml.pickled)# if you make changes here and restart!## Format: [('xmltv channel id', 'freevo display name', 'tv channel name'), ...]## If this variable is set to None (default), Freevo will try to auto-detect# the channel list based on the xmltv file. This doesn't work for all# xmltv grabber, e.g. the German list doesn't contain station lists. In this# case Freevo will output the possible list for you to add them manually.## If auto-detection doesn't work or you want to edit the list, run# freevo tv_grab -query.## Setting this variable to [] will deactivate the tv guide. If you don't have# a tv card, you may also want to add plugin.remove('tv') to remove the whole# tv menu.## All channels listed here will be displayed on the TV menu, even if they're# not present in the XMLTV listing.# ## Timedependent channels:## The TV_CHANNELS-list can look like this:## TV_CHANNELS = [('21', 'SVT1', 'E5'),# ('22', 'SVT2', 'E3'),# ('26', 'TV3', 'E10'),# ('27', 'TV4', 'E6'),# ('10', 'Kanal 5', 'E7'),# ('60', 'Fox Kids', 'E8', ('1234567','0600','1659')),# ('16', 'TV6', 'E8', ('1234567','1700','2359'), # ('1234567','0000','0300')),# ('14', 'MTV Europe', 'E11') ]## As you can see the list takes optional tuples:# ( 'DAYS', 'START','END')## 1234567 in days means all days.# 12345 would mean monday to friday.## It will display "Fox Kids" from 06:00 to 16:59 and "TV6" from 17:00 to 03:00. # 03:00 to 06:00 it won't be displayed at all.#TV_CHANNELS = None# Program to grab xmltv listings. To get a grabber, you need to download# xmltv. A possible value for users in the USA is tv_grab_na# Use the tv_grab helper to grab the listings and cache them. Start# 'freevo tv_grab --help' for more informations.XMLTV_GRABBER = ''# If you want to run tv_sort on your listings add the path to tv_sort here.# tv_sort will make sure all your programs have proper stop times, otherwise# programs might get cut off at midnight.XMLTV_SORT = ''# Number of days the grabber should getXMLTV_DAYS = 3# ======================================================================# Freevo builtin WWW server settings:# ======================================================================## To activate the built in web server, please activate the www plugin# in your local_conf.py:## plugin.activate('www')## Web server port number. 80 is the standard port, but is often# taken already by apache, and cannot be used unless the server# runs as root. Port 8080 is the default, change to 80 if# needed.#WWW_PORT = 8080## Username / Password combinations to login to the web interface.# These should be overridden in local_conf.py# # WWW_USERS = { "user1" : "changeme", # "optional" : "changeme2" }#WWW_USERS = { 0 : 0 }## Divide the TV guide into intervals of this length (in minutes)#WWW_GUIDE_INTERVAL = 30## Precision for TV guide (in minutes)#WWW_GUIDE_PRECISION = 5## Show this many blocks at once#WWW_GUIDE_COLS = 6WWW_STYLESHEET = 'styles/main.css'WWW_JAVASCRIPT = 'scripts/display_prog-head.js'# ======================================================================# Internal stuff, you shouldn't change anything here unless you know# what you are doing# ======================================================================## Config for xml support in the movie browser# the regexp has to be with ([0-9]|[0-9][0-9]) so we can get the numbers#VIDEO_SHOW_REGEXP = "s?([0-9]|[0-9][0-9])[xe]([0-9]|[0-9][0-9])[^0-9]"## Remote control daemon. The server is in the Freevo main application,# and the client is a standalone application in rc_client/#ENABLE_NETWORK_REMOTE = 0REMOTE_CONTROL_HOST = '127.0.0.1'REMOTE_CONTROL_PORT = 16310## XMLTV File## This is the XMLTV file that can be optionally used for TV listings#if os.uname()[0] == 'FreeBSD': XMLTV_FILE = OS_CACHEDIR + '/xmltv/TV.xml'else: XMLTV_FILE = '/tmp/TV.xml'## XML TV Logo Location## Use the "makelogos.py" script to download all the# Station logos into a directory. And then put the path# to those logos hereif os.path.isdir(OS_CACHEDIR + '/xmltv/logos'): TV_LOGOS = OS_CACHEDIR + '/xmltv/logos'else: if not os.path.isdir('/tmp/freevo/xmltv/logos'): os.makedirs('/tmp/freevo/xmltv/logos') TV_LOGOS = '/tmp/freevo/xmltv/logos'LOCALE='latin-1'FREEVO_EVENTHANDLER_SANDBOX = 1# Use stat to check if a directory has changed. This is faster and should# work with all kinds of filesystems. No need to change it I guessDIRECTORY_USE_STAT_FOR_CHANGES = True# Set to 1 to log mplayer output to ./mplayer_stdout.log and# ./mplayer_stderr.logMPLAYER_DEBUG = 0TIME_DEBUG = 03. freevo.confcdparanoia = /usr/bin/cdparanoiachanlist = us-cabledisplay = x11fbxine = /usr/bin/fbxineflac = /usr/bin/flacgeometry = 800x600jpegtran = /usr/bin/jpegtranlame = /usr/bin/lamelsdvd = /usr/bin/lsdvdmplayer = /usr/bin/mplayeroggenc = /usr/bin/oggencrenice = /usr/bin/renicesetterm = /usr/bin/settermtv = ntscversion = 2.1xine = /usr/bin/xine