clueless

Command: cat /var/log/dmesgLinux version 2.6.16-2-686 (Debian 2.6.16-17) (waldi@debian.org) (gcc version 4.0.4 20060630 (prerelease) (Debian 4.0.3-4)) #1 Sat Jul 15 21:59:21 UTC 2006BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffdc00 (usable) BIOS-e820: 000000001fffdc00 - 000000001ffffc00 (ACPI data) BIOS-e820: 000000001ffffc00 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)0MB HIGHMEM available.511MB LOWMEM available.On node 0 totalpages: 131069  DMA zone: 4096 pages, LIFO batch:0  DMA32 zone: 0 pages, LIFO batch:0  Normal zone: 126973 pages, LIFO batch:31  HighMem zone: 0 pages, LIFO batch:0DMI 2.1 present.ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6a80ACPI: RSDT (v001 PTLTD    RSDT   0x00000001 PTL  0x01000000) @ 0x1fffde96ACPI: FADT (v001 GATEWA TABOR II 0x19991104 PTL  0x000f4240) @ 0x1ffffb8cACPI: DSDT (v001 GATEWA TABOR II 0x00000001 MSFT 0x01000004) @ 0x00000000ACPI: PM-Timer IO Port: 0x8008Allocating PCI resources starting at 30000000 (gap: 20000000:dffe7000)Built 1 zonelistsKernel command line: root=/dev/hdd1 ro vga=791 acpi=force lapic Local APIC disabled by BIOS -- reenabling.Found and enabled local APIC!mapped APIC to ffffd000 (fee00000)Enabling fast FPU save and restore... done.Initializing CPU#0PID hash table entries: 2048 (order: 11, 32768 bytes)Detected 349.100 MHz processor.Using pmtmr for high-res timesourceConsole: colour dummy device 80x25Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 511432k/524276k available (1408k kernel code, 12308k reserved, 528k data, 144k init, 0k highmem)Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay using timer specific routine.. 699.34 BogoMIPS (lpj=1398692)Security Framework v1.0.0 initializedSELinux:  Disabled at boot.Capability LSM initializedMount-cache hash table entries: 512CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000CPU: L1 I cache: 16K, L1 D cache: 16KCPU: L2 cache: 512KCPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 00000000 00000000 00000000Intel machine check architecture supported.Intel machine check reporting enabled on CPU#0.CPU: Intel Pentium II (Deschutes) stepping 02Checking 'hlt' instruction... OK.ACPI: setting ELCR to 0200 (from 0e00)checking if image is initramfs... it isFreeing initrd memory: 5032k freedNET: Registered protocol family 16ACPI: bus type pci registeredPCI: PCI BIOS revision 2.10 entry at 0xfd983, last bus=1PCI: Using configuration type 1ACPI: Subsystem revision 20060127ACPI: Interpreter enabledACPI: Using PIC for interrupt routingACPI: PCI Root Bridge [PCI0] (0000:00)PCI: Probing PCI hardware (bus 00)ACPI: Assume root bridge [\_SB_.PCI0] bus is 0PCI quirk: region 8000-803f claimed by PIIX4 ACPIPCI quirk: region 7000-700f claimed by PIIX4 SMBBoot video device is 0000:01:00.0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)ACPI: Power Resource [PFAN] (on)Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initpnp: PnP ACPI: found 12 devicesPnPBIOS: Disabled by ACPI PNPPCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a reportpnp: 00:01: ioport range 0x7000-0x700f has been reservedpnp: 00:01: ioport range 0x8000-0x803f could not be reservedPCI: Failed to allocate mem resource #6:10000@f8000000 for 0000:01:00.0PCI: Bridge: 0000:00:01.0  IO window: disabled.  MEM window: d1000000-d1ffffff  PREFETCH window: f0000000-f7ffffffaudit: initializing netlink socket (disabled)audit(1220461020.776:1): initializedVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Initializing Cryptographic APIio scheduler noop registeredio scheduler anticipatory registered (default)io scheduler deadline registeredio scheduler cfq registeredLimiting direct PCI/PCI transfers.vesafb: framebuffer at 0xf0000000, mapped to 0xd0880000, using 3072k, total 65536kvesafb: mode is 1024x768x16, linelength=2048, pages=0vesafb: protected mode interface info at c000:c2c0vesafb: scrolling: redrawvesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0Console: switching to colour frame buffer device 128x48fb0: VESA VGA frame buffer deviceisapnp: Scanning for PnP cards...isapnp: No Plug & Play device foundPNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MICE] at 0x60,0x64 irq 1,12serio: i8042 AUX port at 0x60,0x64 irq 12serio: i8042 KBD port at 0x60,0x64 irq 1Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550Apnp: Device 00:0b activated.00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550ARAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksizeNET: Registered protocol family 2input: AT Translated Set 2 keyboard as /class/input/input0IP route cache hash table entries: 8192 (order: 3, 32768 bytes)TCP established hash table entries: 32768 (order: 5, 131072 bytes)TCP bind hash table entries: 32768 (order: 5, 131072 bytes)TCP: Hash tables configured (established 32768 bind 32768)TCP reno registeredTCP bic registeredNET: Registered protocol family 1NET: Registered protocol family 17NET: Registered protocol family 8NET: Registered protocol family 20Using IPI Shortcut modeACPI wakeup devices: PCI0 USB0 UAR1 UAR2 ACPI: (supports S0 S1 S5)Freeing unused kernel memory: 144k freedACPI: Fan [FAN1] (on)ACPI: CPU0 (power states: C1[C1] C2[C2])usbcore: registered new driver usbfsusbcore: registered new driver hubnatsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002  originally by Donald Becker <becker@scyld.com>  http://www.scyld.com/network/natsemi.html  2.4.x kernel port by Jeff Garzik, Tjeerd MulderPCI: Enabling device 0000:00:0f.0 (0104 -> 0107)ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10PCI: setting IRQ 10 as level-triggeredACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10natsemi eth0: NatSemi DP8381[56] at 0xd0000000 (0000:00:0f.0), 00:09:5b:8d:10:f5, IRQ 10, port TP.USB Universal Host Controller Interface driver v2.3ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9PCI: setting IRQ 9 as level-triggeredACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9uhci_hcd 0000:00:07.2: UHCI Host Controlleruhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1uhci_hcd 0000:00:07.2: irq 9, io base 0x00001020usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detectedUniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxPIIX4: IDE controller at PCI slot 0000:00:07.1PIIX4: chipset revision 1PIIX4: not 100% native mode: will probe irqs later    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:DMA    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:DMAProbing IDE interface ide0...Floppy drive(s): fd0 is 1.44MFDC 0 is a post-1991 82077hda: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drivehdb: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM driveide0 at 0x1f0-0x1f7,0x3f6 on irq 14Probing IDE interface ide1...hdc: HDS728080PLAT20, ATA DISK drivehdd: WDC AC29100D, ATA DISK driveide1 at 0x170-0x177,0x376 on irq 15hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)Uniform CD-ROM driver Revision: 3.20hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)hdc: max request size: 512KiBhdc: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(33)hdc: cache flushes supported hdc: hdc1 hdc2 < hdc5 > hdc3 hdc4hdd: max request size: 128KiBhdd: 17803440 sectors (9115 MB) w/1966KiB Cache, CHS=17662/16/63, UDMA(33)hdd: cache flushes not supported hdd: hdd1 hdd2kjournald starting.  Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.piix4_smbus 0000:00:07.3: Found 0000:00:07.3 devicePCI: Enabling device 0000:00:10.1 (0104 -> 0105)gameport: EMU10K1 is pci0000:00:10.1/gameport0, io 0x1010, speed 1169kHzinput: ImExPS/2 Generic Explorer Mouse as /class/input/input1pci_hotplug: PCI Hot Plug PCI Core version: 0.5shpchp: Standard Hot Plug PCI Controller Driver version: 0.4Real Time Clock Driver v1.12acmice: PS/2 mouse device common for all micepnp: Device 00:0a activated.parport: PnPBIOS parport detected.parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]Linux agpgart interface v0.101 (c) Dave Jonesagpgart: Detected an Intel 440BX Chipset.agpgart: AGP aperture is 256M @ 0xe0000000PCI: Enabling device 0000:00:10.0 (0104 -> 0105)ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9Adding 401616k swap on /dev/hdd2.  Priority:-1 extents:1 across:401616kEXT3 FS on hdd1, internal journalSCSI subsystem initializedInitializing USB Mass Storage driver...usbcore: registered new driver usb-storageUSB Mass Storage support registered.[drm] Initialized drm 1.0.1 20051102loop: loaded (max 8 devices)ReiserFS: hdc3: found reiserfs format "3.6" with standard journalReiserFS: hdc3: using journaled data modeReiserFS: hdc3: journal params: device hdc3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: hdc3: checking transaction log (hdc3)ReiserFS: hdc3: Using r5 hash to sort nameseth0: DSPCFG accepted after 0 usec.eth0: link up.eth0: Setting full-duplex based on negotiated link capability.