rendered paste bodydaemon:Aug 21 11:09:34 Seqlimson ntfs-3g[6890]: Version 1.2216 external FUSE 27 Aug 21 11:09:34 Seqlimson ntfs-3g[6890]: Mounted /dev/sda2 (Read-Write, label "", NTFS 3.1) Aug 21 11:09:34 Seqlimson ntfs-3g[6890]: Cmdline options: rw,nosuid,nodev,uhelper=hal,locale=en_IN Aug 21 11:09:34 Seqlimson ntfs-3g[6890]: Mount options: rw,nosuid,nodev,uhelper=hal,silent,allow_other,nonempty,relatime,noatime,fsname=/dev/sda2,blkdev,blksize=4096 Aug 21 11:09:34 Seqlimson hald: mounted /dev/sda2 on behalf of uid 1000Aug 21 15:23:47 Seqlimson smbd[5050]: [2008/08/21 15:23:47, 0] lib/util_sock.c:get_peer_addr(1224) Aug 21 15:23:47 Seqlimson smbd[5050]: getpeername failed. Error was Transport endpoint is not connected Aug 21 15:23:47 Seqlimson smbd[9139]: [2008/08/21 15:23:47, 0] lib/util_sock.c:get_peer_addr(1224) Aug 21 15:23:47 Seqlimson smbd[9139]: getpeername failed. Error was Transport endpoint is not connected Aug 21 15:23:47 Seqlimson smbd[9139]: [2008/08/21 15:23:47, 0] lib/util_sock.c:write_data(562) Aug 21 15:23:47 Seqlimson smbd[9139]: write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer Aug 21 15:23:47 Seqlimson smbd[9139]: [2008/08/21 15:23:47, 0] lib/util_sock.c:send_smb(761) Aug 21 15:23:47 Seqlimson smbd[9139]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 21 16:24:35 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 21 16:24:35 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 21 16:24:35 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 21 16:24:35 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 16597 seconds.Aug 21 18:20:02 Seqlimson init: tty4 main process (4482) killed by TERM signalAug 21 18:20:02 Seqlimson init: tty2 main process (4485) killed by TERM signalAug 21 18:20:02 Seqlimson init: tty3 main process (4487) killed by TERM signalAug 21 18:20:02 Seqlimson init: tty6 main process (4489) killed by TERM signalAug 21 18:20:02 Seqlimson init: tty1 main process (5637) killed by TERM signalAug 21 18:20:02 Seqlimson init: tty5 main process (4483) killed by TERM signalAug 21 18:20:02 Seqlimson nmbd[5048]: [2008/08/21 18:20:02, 0] nmbd/nmbd.c:terminate(58) Aug 21 18:20:02 Seqlimson nmbd[5048]: Got SIGTERM: going down... Aug 21 18:20:05 Seqlimson avahi-daemon[4959]: Got SIGTERM, quitting.Aug 21 18:20:05 Seqlimson avahi-daemon[4959]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.158.Aug 22 07:30:01 Seqlimson NetworkManager: <info> starting... Aug 22 07:30:02 Seqlimson avahi-daemon[4963]: Found user 'avahi' (UID 109) and group 'avahi' (GID 120).Aug 22 07:30:02 Seqlimson avahi-daemon[4963]: Successfully dropped root privileges.Aug 22 07:30:02 Seqlimson avahi-daemon[4963]: avahi-daemon 0.6.22 starting up.Aug 22 07:30:02 Seqlimson avahi-daemon[4963]: Successfully called chroot().Aug 22 07:30:02 Seqlimson avahi-daemon[4963]: Successfully dropped remaining capabilities.Aug 22 07:30:02 Seqlimson avahi-daemon[4963]: No service file found in /etc/avahi/services.Aug 22 07:30:02 Seqlimson avahi-daemon[4963]: Network interface enumeration completed.Aug 22 07:30:02 Seqlimson avahi-daemon[4963]: Registering HINFO record with values 'I686'/'LINUX'.Aug 22 07:30:02 Seqlimson avahi-daemon[4963]: Server startup complete. Host name is Seqlimson.local. Local service cookie is 3864823750.Aug 22 07:30:02 Seqlimson nmbd[5052]: [2008/08/22 07:30:02, 0] nmbd/nmbd_subnetdb.c:create_subnets(190) Aug 22 07:30:02 Seqlimson nmbd[5052]: create_subnets: No local interfaces ! Aug 22 07:30:02 Seqlimson nmbd[5052]: [2008/08/22 07:30:02, 0] nmbd/nmbd_subnetdb.c:create_subnets(191) Aug 22 07:30:02 Seqlimson nmbd[5052]: create_subnets: Waiting for an interface to appear ... Aug 22 07:30:03 Seqlimson winbindd[5072]: [2008/08/22 07:30:03, 0] nsswitch/winbindd_cache.c:initialize_winbindd_cache(2222) Aug 22 07:30:03 Seqlimson winbindd[5072]: initialize_winbindd_cache: clearing cache and re-creating with version number 1 Aug 22 07:30:04 Seqlimson hcid[5263]: Bluetooth HCI daemonAug 22 07:30:04 Seqlimson NetworkManager: <info> eth0: Device is fully-supported using driver 'e1000e'. Aug 22 07:30:04 Seqlimson NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start Aug 22 07:30:04 Seqlimson NetworkManager: <info> nm_device_init(): device's worker thread started, continuing. Aug 22 07:30:04 Seqlimson NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'. Aug 22 07:30:04 Seqlimson NetworkManager: <info> Deactivating device eth0. Aug 22 07:30:04 Seqlimson NetworkManager: <debug> [1219370404.234677] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_model_DVD__RW_DH_16W1S'). Aug 22 07:30:04 Seqlimson hcid[5263]: Starting SDP serverAug 22 07:30:04 Seqlimson hcid[5263]: Created local server at unix:abstract=/var/run/dbus-m82BqZU7We,guid=2ce9ce88393ac339b6b810f048ae1da4Aug 22 07:30:04 Seqlimson NetworkManager: <debug> [1219370404.315461] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). Aug 22 07:30:04 Seqlimson audio[5300]: Bluetooth Audio daemonAug 22 07:30:04 Seqlimson audio[5300]: Unix socket created: 5Aug 22 07:30:04 Seqlimson audio[5300]: audio.conf: Key file does not have key 'Enable'Aug 22 07:30:04 Seqlimson audio[5300]: audio.conf: Key file does not have key 'Disable'Aug 22 07:30:04 Seqlimson input[5301]: Bluetooth Input daemonAug 22 07:30:04 Seqlimson input[5301]: Registered input manager path:/org/bluez/inputAug 22 07:30:04 Seqlimson audio[5300]: add_service_record: got record id 0x10000Aug 22 07:30:04 Seqlimson audio[5300]: audio.conf: Key file does not have key 'Disable'Aug 22 07:30:04 Seqlimson audio[5300]: audio.conf: Key file does not have group 'A2DP'Aug 22 07:30:04 Seqlimson last message repeated 3 timesAug 22 07:30:04 Seqlimson audio[5300]: SEP 0x806d2b0 registered: type:0 codec:0 seid:1Aug 22 07:30:04 Seqlimson audio[5300]: add_service_record: got record id 0x10001Aug 22 07:30:04 Seqlimson audio[5300]: add_service_record: got record id 0x10002Aug 22 07:30:04 Seqlimson audio[5300]: add_service_record: got record id 0x10003Aug 22 07:30:04 Seqlimson audio[5300]: Registered manager path:/org/bluez/audioAug 22 07:30:06 Seqlimson NetworkManager: <debug> [1219370406.880807] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_8086_29b2_drm_i915_card0'). Aug 22 07:30:07 Seqlimson NetworkManager: <info> Will activate wired connection 'eth0' because it now has a link. Aug 22 07:30:07 Seqlimson NetworkManager: <info> SWITCH: no current connection, found better connection 'eth0'. Aug 22 07:30:07 Seqlimson NetworkManager: <info> Will activate connection 'eth0'. Aug 22 07:30:07 Seqlimson NetworkManager: <info> Device eth0 activation scheduled... Aug 22 07:30:07 Seqlimson NetworkManager: <info> Activation (eth0) started... Aug 22 07:30:07 Seqlimson NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Aug 22 07:30:07 Seqlimson NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Aug 22 07:30:07 Seqlimson NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Aug 22 07:30:07 Seqlimson NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Aug 22 07:30:07 Seqlimson NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Aug 22 07:30:07 Seqlimson NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Aug 22 07:30:07 Seqlimson NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Aug 22 07:30:07 Seqlimson NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Aug 22 07:30:07 Seqlimson NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Aug 22 07:30:08 Seqlimson NetworkManager: <info> Activation (eth0) Beginning DHCP transaction. Aug 22 07:30:08 Seqlimson NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Aug 22 07:30:08 Seqlimson NetworkManager: <info> DHCP daemon state is now 12 (successfully started) for interface eth0 Aug 22 07:30:09 Seqlimson avahi-daemon[4963]: Registering new address record for fe80::21a:a0ff:fee1:3ea1 on eth0.*.Aug 22 07:30:09 Seqlimson NetworkManager: <info> DHCP daemon state is now 1 (starting) for interface eth0 Aug 22 07:30:11 Seqlimson dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5Aug 22 07:30:16 Seqlimson dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5Aug 22 07:30:21 Seqlimson dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11Aug 22 07:30:32 Seqlimson dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14Aug 22 07:30:46 Seqlimson dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14Aug 22 07:30:46 Seqlimson dhclient: DHCPOFFER of 192.168.0.158 from 192.168.0.254Aug 22 07:30:46 Seqlimson dhclient: DHCPREQUEST of 192.168.0.158 on eth0 to 255.255.255.255 port 67Aug 22 07:30:46 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 22 07:30:46 Seqlimson avahi-daemon[4963]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.158.Aug 22 07:30:46 Seqlimson avahi-daemon[4963]: New relevant interface eth0.IPv4 for mDNS.Aug 22 07:30:46 Seqlimson avahi-daemon[4963]: Registering new address record for 192.168.0.158 on eth0.IPv4.Aug 22 07:30:46 Seqlimson NetworkManager: <info> DHCP daemon state is now 2 (bound) for interface eth0 Aug 22 07:30:46 Seqlimson NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) scheduled... Aug 22 07:30:46 Seqlimson NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) started... Aug 22 07:30:46 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 19540 seconds.Aug 22 07:30:47 Seqlimson NetworkManager: <info> Retrieved the following IP4 configuration from the DHCP daemon: Aug 22 07:30:47 Seqlimson NetworkManager: <info> address 192.168.0.158 Aug 22 07:30:47 Seqlimson NetworkManager: <info> netmask 255.255.255.0 Aug 22 07:30:47 Seqlimson NetworkManager: <info> broadcast 192.168.0.255 Aug 22 07:30:47 Seqlimson NetworkManager: <info> gateway 192.168.0.254 Aug 22 07:30:47 Seqlimson NetworkManager: <info> nameserver 202.56.250.5 Aug 22 07:30:47 Seqlimson NetworkManager: <info> nameserver 202.56.250.6 Aug 22 07:30:47 Seqlimson NetworkManager: <info> nameserver 202.56.240.5 Aug 22 07:30:47 Seqlimson NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled... Aug 22 07:30:47 Seqlimson NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) complete. Aug 22 07:30:47 Seqlimson NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... Aug 22 07:30:47 Seqlimson avahi-daemon[4963]: Withdrawing address record for 192.168.0.158 on eth0.Aug 22 07:30:47 Seqlimson avahi-daemon[4963]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.158.Aug 22 07:30:47 Seqlimson avahi-daemon[4963]: Interface eth0.IPv4 no longer relevant for mDNS.Aug 22 07:30:47 Seqlimson avahi-daemon[4963]: Withdrawing address record for fe80::21a:a0ff:fee1:3ea1 on eth0.Aug 22 07:30:47 Seqlimson avahi-daemon[4963]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.158.Aug 22 07:30:47 Seqlimson avahi-daemon[4963]: New relevant interface eth0.IPv4 for mDNS.Aug 22 07:30:47 Seqlimson avahi-daemon[4963]: Registering new address record for 192.168.0.158 on eth0.IPv4.Aug 22 07:30:48 Seqlimson NetworkManager: <info> Clearing nscd hosts cache. Aug 22 07:30:48 Seqlimson NetworkManager: <WARN> nm_spawn_process(): nm_spawn_process('/usr/sbin/nscd -i hosts'): could not spawn process. (Failed to execute child process "/usr/sbin/nscd" (No such file or directory)) Aug 22 07:30:48 Seqlimson NetworkManager: <info> Activation (eth0) successful, device activated. Aug 22 07:30:48 Seqlimson NetworkManager: <info> Activation (eth0) Finish handler scheduled. Aug 22 07:30:48 Seqlimson NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. Aug 22 07:30:50 Seqlimson avahi-daemon[4963]: Registering new address record for fe80::21a:a0ff:fee1:3ea1 on eth0.*.Aug 22 07:30:50 Seqlimson ntpdate[5808]: step time server 91.189.94.4 offset -1.060044 secAug 22 07:30:49 Seqlimson hcid[5263]: Default passkey agent (:1.23, /org/bluez/passkey) registeredAug 22 07:30:49 Seqlimson hcid[5263]: Default authorization agent (:1.23, /org/bluez/auth) registeredAug 22 07:30:53 Seqlimson NetworkManager: <info> Updating allowed wireless network lists. Aug 22 07:30:53 Seqlimson NetworkManager: <WARN> nm_dbus_get_networks_cb(): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored.. Aug 22 07:31:03 Seqlimson ntfs-3g[6025]: Version 1.2216 external FUSE 27 Aug 22 07:31:03 Seqlimson ntfs-3g[6025]: Mounted /dev/sda2 (Read-Write, label "", NTFS 3.1) Aug 22 07:31:03 Seqlimson ntfs-3g[6025]: Cmdline options: rw,nosuid,nodev,uhelper=hal,locale=en_IN Aug 22 07:31:03 Seqlimson ntfs-3g[6025]: Mount options: rw,nosuid,nodev,uhelper=hal,silent,allow_other,nonempty,relatime,noatime,fsname=/dev/sda2,blkdev,blksize=4096 Aug 22 07:31:03 Seqlimson hald: mounted /dev/sda2 on behalf of uid 1000Aug 22 12:56:26 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 22 12:56:26 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 22 12:56:26 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 17508 seconds.Aug 22 12:56:26 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 22 15:33:35 Seqlimson smbd[7410]: [2008/08/22 15:33:35, 0] lib/util_sock.c:write_data(562) Aug 22 15:33:35 Seqlimson smbd[7410]: write_data: write failure in writing to client 192.168.0.53. Error Connection reset by peer Aug 22 15:33:35 Seqlimson smbd[7410]: [2008/08/22 15:33:35, 0] lib/util_sock.c:send_smb(761) Aug 22 15:33:35 Seqlimson smbd[7410]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 22 15:48:55 Seqlimson smbd[5054]: [2008/08/22 15:48:55, 0] lib/util_sock.c:get_peer_addr(1224) Aug 22 15:48:55 Seqlimson smbd[5054]: getpeername failed. Error was Transport endpoint is not connected Aug 22 15:48:55 Seqlimson smbd[7624]: [2008/08/22 15:48:55, 0] lib/util_sock.c:get_peer_addr(1224) Aug 22 15:48:55 Seqlimson smbd[7624]: getpeername failed. Error was Transport endpoint is not connected Aug 22 15:48:55 Seqlimson smbd[7624]: [2008/08/22 15:48:55, 0] lib/util_sock.c:write_data(562) Aug 22 15:48:55 Seqlimson smbd[7624]: write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer Aug 22 15:48:55 Seqlimson smbd[7624]: [2008/08/22 15:48:55, 0] lib/util_sock.c:send_smb(761) Aug 22 15:48:55 Seqlimson smbd[7624]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 22 15:59:32 Seqlimson smbd[7632]: [2008/08/22 15:59:32, 0] lib/util_sock.c:write_data(562) Aug 22 15:59:32 Seqlimson smbd[7632]: write_data: write failure in writing to client 192.168.0.214. Error Connection reset by peer Aug 22 15:59:32 Seqlimson smbd[7632]: [2008/08/22 15:59:32, 0] lib/util_sock.c:send_smb(761) Aug 22 15:59:32 Seqlimson smbd[7632]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 22 17:48:14 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 22 17:48:14 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 22 17:48:14 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 17812 seconds.Aug 22 17:48:14 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 22 22:45:06 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 22 22:45:06 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 22 22:45:06 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 22 22:45:06 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 18631 seconds.Aug 23 03:55:37 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 23 03:55:37 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 23 03:55:37 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 23 03:55:37 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 17933 seconds.Aug 23 08:54:30 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 23 08:54:30 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 23 08:54:30 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 23 08:54:30 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 19887 seconds.Aug 23 14:25:57 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 23 14:25:57 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 23 14:25:57 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 21351 seconds.Aug 23 14:25:57 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 23 20:21:48 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 23 20:21:48 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 23 20:21:48 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 23 20:21:48 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 21078 seconds.Aug 24 02:13:06 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 24 02:13:06 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 24 02:13:06 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 19481 seconds.Aug 24 02:13:06 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 24 07:37:47 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 24 07:37:47 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 24 07:37:47 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 24 07:37:47 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 21458 seconds.Aug 24 08:03:58 Seqlimson nmbd[5052]: [2008/08/24 08:03:58, 0] nmbd/nmbd.c:process(576) Aug 24 08:03:58 Seqlimson nmbd[5052]: Got SIGHUP dumping debug info. Aug 24 08:03:58 Seqlimson nmbd[5052]: [2008/08/24 08:03:58, 0] nmbd/nmbd_workgroupdb.c:dump_workgroups(282) Aug 24 08:03:58 Seqlimson nmbd[5052]: dump_workgroups() Aug 24 08:03:58 Seqlimson nmbd[5052]: dump workgroup on subnet 192.168.0.158: netmask= 255.255.255.0: Aug 24 08:03:58 Seqlimson nmbd[5052]: ^IWORKGROUP(1) current master browser = SEQ Aug 24 08:03:58 Seqlimson nmbd[5052]: ^I^ISEQLIMSON 40819a03 (Samba 3.0.28a) Aug 24 08:03:58 Seqlimson nmbd[5052]: ^I^ISEQ 40869003 () Aug 24 13:35:25 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 24 13:35:25 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 24 13:35:25 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 24 13:35:25 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 19466 seconds.Aug 24 18:59:51 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 24 18:59:51 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 24 18:59:51 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 24 18:59:51 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 18806 seconds.Aug 25 00:13:17 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 25 00:13:17 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 25 00:13:17 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 25 00:13:17 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 17193 seconds.Aug 25 04:59:50 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 25 04:59:50 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 25 04:59:50 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 16359 seconds.Aug 25 04:59:50 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 25 09:32:29 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 25 09:32:29 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 25 09:32:29 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 17245 seconds.Aug 25 09:32:29 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 25 11:02:55 Seqlimson smbd[5054]: [2008/08/25 11:02:55, 0] lib/util_sock.c:get_peer_addr(1224) Aug 25 11:02:55 Seqlimson smbd[5054]: getpeername failed. Error was Transport endpoint is not connected Aug 25 11:02:55 Seqlimson smbd[9685]: [2008/08/25 11:02:55, 0] lib/util_sock.c:get_peer_addr(1224) Aug 25 11:02:55 Seqlimson smbd[9685]: getpeername failed. Error was Transport endpoint is not connected Aug 25 11:02:55 Seqlimson smbd[9685]: [2008/08/25 11:02:55, 0] lib/util_sock.c:write_data(562) Aug 25 11:02:55 Seqlimson smbd[9685]: write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer Aug 25 11:02:55 Seqlimson smbd[9685]: [2008/08/25 11:02:55, 0] lib/util_sock.c:send_smb(761) Aug 25 11:02:55 Seqlimson smbd[9685]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 25 11:29:34 Seqlimson smbd[5054]: [2008/08/25 11:29:34, 0] lib/util_sock.c:get_peer_addr(1224) Aug 25 11:29:34 Seqlimson smbd[5054]: getpeername failed. Error was Transport endpoint is not connected Aug 25 11:29:34 Seqlimson smbd[9714]: [2008/08/25 11:29:34, 0] lib/util_sock.c:get_peer_addr(1224) Aug 25 11:29:34 Seqlimson smbd[9714]: getpeername failed. Error was Transport endpoint is not connected Aug 25 11:29:34 Seqlimson smbd[9714]: [2008/08/25 11:29:34, 0] lib/util_sock.c:write_data(562) Aug 25 11:29:34 Seqlimson smbd[9714]: write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer Aug 25 11:29:34 Seqlimson smbd[9714]: [2008/08/25 11:29:34, 0] lib/util_sock.c:send_smb(761) Aug 25 11:29:34 Seqlimson smbd[9714]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 25 13:25:13 Seqlimson NetworkManager: <debug> [1219650913.356362] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4'). Aug 25 13:25:13 Seqlimson NetworkManager: <debug> [1219650913.457553] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0'). Aug 25 13:25:18 Seqlimson NetworkManager: <debug> [1219650918.520053] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host'). Aug 25 13:25:18 Seqlimson NetworkManager: <debug> [1219650918.521286] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host_scsi_device_lun0'). Aug 25 13:25:18 Seqlimson NetworkManager: <debug> [1219650918.522593] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host_scsi_device_lun0_scsi_generic'). Aug 25 13:25:18 Seqlimson NetworkManager: <debug> [1219650918.627764] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_JetFlash_TS1GJF150_AWEET2H4_0_0'). Aug 25 13:25:18 Seqlimson NetworkManager: <debug> [1219650918.659467] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_7C8D_24E7'). Aug 25 13:25:18 Seqlimson hald: mounted /dev/sdb1 on behalf of uid 1000Aug 25 13:26:29 Seqlimson NetworkManager: <debug> [1219650989.612272] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host_scsi_device_lun0_scsi_generic'). Aug 25 13:26:29 Seqlimson hald[5133]: forcibly attempting to lazy unmount /dev/sdb1 as enclosing drive was disconnectedAug 25 13:26:29 Seqlimson hald: unmounted /dev/sdb1 from '/media/disk-1' on behalf of uid 0Aug 25 13:26:29 Seqlimson NetworkManager: <debug> [1219650989.655996] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_7C8D_24E7'). Aug 25 13:26:29 Seqlimson NetworkManager: <debug> [1219650989.657601] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_JetFlash_TS1GJF150_AWEET2H4_0_0'). Aug 25 13:26:29 Seqlimson NetworkManager: <debug> [1219650989.657655] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host_scsi_device_lun0'). Aug 25 13:26:29 Seqlimson NetworkManager: <debug> [1219650989.659854] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host'). Aug 25 13:26:29 Seqlimson NetworkManager: <debug> [1219650989.659896] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0'). Aug 25 13:26:29 Seqlimson NetworkManager: <debug> [1219650989.659986] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4'). Aug 25 13:28:17 Seqlimson NetworkManager: <debug> [1219651097.704226] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4'). Aug 25 13:28:17 Seqlimson NetworkManager: <debug> [1219651097.764630] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0'). Aug 25 13:28:22 Seqlimson NetworkManager: <debug> [1219651102.758676] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host'). Aug 25 13:28:22 Seqlimson NetworkManager: <debug> [1219651102.762851] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host_scsi_device_lun0'). Aug 25 13:28:22 Seqlimson NetworkManager: <debug> [1219651102.764478] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host_scsi_device_lun0_scsi_generic'). Aug 25 13:28:22 Seqlimson NetworkManager: <debug> [1219651102.834590] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_JetFlash_TS1GJF150_AWEET2H4_0_0'). Aug 25 13:28:22 Seqlimson NetworkManager: <debug> [1219651102.871706] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_7C8D_24E7'). Aug 25 13:28:22 Seqlimson hald: mounted /dev/sdb1 on behalf of uid 1000Aug 25 13:28:29 Seqlimson NetworkManager: <debug> [1219651109.697577] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host_scsi_device_lun0_scsi_generic'). Aug 25 13:28:29 Seqlimson hald[5133]: forcibly attempting to lazy unmount /dev/sdb1 as enclosing drive was disconnectedAug 25 13:28:29 Seqlimson hald: unmounted /dev/sdb1 from '/media/disk-1' on behalf of uid 0Aug 25 13:28:29 Seqlimson NetworkManager: <debug> [1219651109.729255] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_7C8D_24E7'). Aug 25 13:28:29 Seqlimson NetworkManager: <debug> [1219651109.729309] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_JetFlash_TS1GJF150_AWEET2H4_0_0'). Aug 25 13:28:29 Seqlimson NetworkManager: <debug> [1219651109.762873] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host_scsi_device_lun0'). Aug 25 13:28:29 Seqlimson NetworkManager: <debug> [1219651109.762930] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0_scsi_host'). Aug 25 13:28:29 Seqlimson NetworkManager: <debug> [1219651109.764131] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4_if0'). Aug 25 13:28:29 Seqlimson NetworkManager: <debug> [1219651109.764170] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_58f_6387_AWEET2H4'). Aug 25 14:08:28 Seqlimson smbd[10426]: [2008/08/25 14:08:28, 0] lib/util_sock.c:write_data(562) Aug 25 14:08:28 Seqlimson smbd[10426]: write_data: write failure in writing to client 192.168.0.214. Error Connection reset by peer Aug 25 14:08:28 Seqlimson smbd[10426]: [2008/08/25 14:08:28, 0] lib/util_sock.c:send_smb(761) Aug 25 14:08:28 Seqlimson smbd[10426]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 25 14:19:54 Seqlimson dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.254 port 67Aug 25 14:19:54 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 25 14:19:54 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 21062 seconds.Aug 25 14:19:54 Seqlimson NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Aug 25 14:36:37 Seqlimson smbd[5054]: [2008/08/25 14:36:37, 0] lib/util_sock.c:get_peer_addr(1224) Aug 25 14:36:37 Seqlimson smbd[5054]: getpeername failed. Error was Transport endpoint is not connected Aug 25 14:36:37 Seqlimson smbd[10468]: [2008/08/25 14:36:37, 0] lib/util_sock.c:get_peer_addr(1224) Aug 25 14:36:37 Seqlimson smbd[10468]: getpeername failed. Error was Transport endpoint is not connected Aug 25 14:36:37 Seqlimson smbd[10468]: [2008/08/25 14:36:37, 0] lib/util_sock.c:write_data(562) Aug 25 14:36:37 Seqlimson smbd[10468]: write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer Aug 25 14:36:37 Seqlimson smbd[10468]: [2008/08/25 14:36:37, 0] lib/util_sock.c:send_smb(761) Aug 25 14:36:37 Seqlimson smbd[10468]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 25 16:08:14 Seqlimson smbd[5054]: [2008/08/25 16:08:14, 0] lib/util_sock.c:get_peer_addr(1224) Aug 25 16:08:14 Seqlimson smbd[5054]: getpeername failed. Error was Transport endpoint is not connected Aug 25 16:08:14 Seqlimson smbd[10581]: [2008/08/25 16:08:14, 0] lib/util_sock.c:get_peer_addr(1224) Aug 25 16:08:14 Seqlimson smbd[10581]: getpeername failed. Error was Transport endpoint is not connected Aug 25 16:08:14 Seqlimson smbd[10581]: [2008/08/25 16:08:14, 0] lib/util_sock.c:write_data(562) Aug 25 16:08:14 Seqlimson smbd[10581]: write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer Aug 25 16:08:14 Seqlimson smbd[10581]: [2008/08/25 16:08:14, 0] lib/util_sock.c:send_smb(761) Aug 25 16:08:14 Seqlimson smbd[10581]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 25 16:09:45 Seqlimson smbd[10584]: [2008/08/25 16:09:45, 0] lib/util_sock.c:get_peer_addr(1224) Aug 25 16:09:45 Seqlimson smbd[10584]: getpeername failed. Error was Transport endpoint is not connected Aug 25 16:09:45 Seqlimson smbd[10584]: [2008/08/25 16:09:45, 0] lib/util_sock.c:write_data(562) Aug 25 16:09:45 Seqlimson smbd[10584]: write_data: write failure in writing to client 192.168.0.48. Error Connection reset by peer Aug 25 16:09:45 Seqlimson smbd[10584]: [2008/08/25 16:09:45, 0] lib/util_sock.c:send_smb(761) Aug 25 16:09:45 Seqlimson smbd[10584]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 25 16:27:45 Seqlimson smbd[5054]: [2008/08/25 16:27:45, 0] lib/util_sock.c:get_peer_addr(1224) Aug 25 16:27:45 Seqlimson smbd[5054]: getpeername failed. Error was Transport endpoint is not connected Aug 25 16:27:45 Seqlimson smbd[10618]: [2008/08/25 16:27:45, 0] lib/util_sock.c:get_peer_addr(1224) Aug 25 16:27:45 Seqlimson smbd[10618]: getpeername failed. Error was Transport endpoint is not connected Aug 25 16:27:45 Seqlimson smbd[10618]: [2008/08/25 16:27:45, 0] lib/util_sock.c:write_data(562) Aug 25 16:27:45 Seqlimson smbd[10618]: write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer Aug 25 16:27:45 Seqlimson smbd[10618]: [2008/08/25 16:27:45, 0] lib/util_sock.c:send_smb(761) Aug 25 16:27:45 Seqlimson smbd[10618]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 25 18:20:22 Seqlimson NetworkManager: <debug> [1219668622.897992] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_421_4fa_354189021695096'). Aug 25 18:20:22 Seqlimson NetworkManager: <debug> [1219668622.953541] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_421_4fa_354189021695096_if0'). Aug 25 18:20:27 Seqlimson NetworkManager: <debug> [1219668627.971276] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_421_4fa_354189021695096_if0_scsi_host'). Aug 25 18:20:27 Seqlimson NetworkManager: <debug> [1219668627.972419] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_421_4fa_354189021695096_if0_scsi_host_scsi_device_lun0'). Aug 25 18:20:28 Seqlimson NetworkManager: <debug> [1219668628.041201] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_421_4fa_354189021695096_if0_scsi_host_scsi_device_lun0_scsi_generic'). Aug 25 18:20:28 Seqlimson NetworkManager: <debug> [1219668628.362117] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Nokia_Nokia_6300_354189021695096_0_0'). Aug 25 18:20:28 Seqlimson NetworkManager: <debug> [1219668628.528854] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_1234_5678'). Aug 25 18:20:28 Seqlimson hald: mounted /dev/sdb on behalf of uid 1000Aug 25 18:26:51 Seqlimson NetworkManager: <debug> [1219669011.097268] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_421_4fa_354189021695096_if0_scsi_host_scsi_device_lun0_scsi_generic'). Aug 25 18:26:51 Seqlimson hald[5133]: forcibly attempting to lazy unmount /dev/sdb as enclosing drive was disconnectedAug 25 18:26:51 Seqlimson hald: unmounted /dev/sdb from '/media/disk-1' on behalf of uid 0Aug 25 18:26:51 Seqlimson NetworkManager: <debug> [1219669011.137638] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_1234_5678'). Aug 25 18:26:51 Seqlimson NetworkManager: <debug> [1219669011.137692] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Nokia_Nokia_6300_354189021695096_0_0'). Aug 25 18:26:51 Seqlimson NetworkManager: <debug> [1219669011.137719] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_421_4fa_354189021695096_if0_scsi_host_scsi_device_lun0'). Aug 25 18:26:51 Seqlimson NetworkManager: <debug> [1219669011.137745] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_421_4fa_354189021695096_if0_scsi_host'). Aug 25 18:26:51 Seqlimson NetworkManager: <debug> [1219669011.137778] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_421_4fa_354189021695096_if0'). Aug 25 18:26:51 Seqlimson NetworkManager: <debug> [1219669011.157415] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_421_4fa_354189021695096'). Aug 25 18:27:42 Seqlimson init: tty4 main process (4486) killed by TERM signalAug 25 18:27:42 Seqlimson init: tty5 main process (4487) killed by TERM signalAug 25 18:27:42 Seqlimson init: tty2 main process (4489) killed by TERM signalAug 25 18:27:42 Seqlimson init: tty3 main process (4491) killed by TERM signalAug 25 18:27:42 Seqlimson init: tty6 main process (4493) killed by TERM signalAug 25 18:27:42 Seqlimson init: tty1 main process (5645) killed by TERM signalAug 25 18:27:43 Seqlimson gdm[5345]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failed Aug 25 18:27:43 Seqlimson gdm[5345]: WARNING: Request for invalid configuration key xdmcp/Enable=false Aug 25 18:27:43 Seqlimson nmbd[5052]: [2008/08/25 18:27:43, 0] nmbd/nmbd.c:terminate(58) Aug 25 18:27:43 Seqlimson nmbd[5052]: Got SIGTERM: going down... Aug 25 18:27:45 Seqlimson avahi-daemon[4963]: Got SIGTERM, quitting.Aug 25 18:27:45 Seqlimson avahi-daemon[4963]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.158.Aug 26 10:22:28 Seqlimson NetworkManager: <info> starting... Aug 26 10:22:29 Seqlimson avahi-daemon[4946]: Found user 'avahi' (UID 109) and group 'avahi' (GID 120).Aug 26 10:22:29 Seqlimson avahi-daemon[4946]: Successfully dropped root privileges.Aug 26 10:22:29 Seqlimson avahi-daemon[4946]: avahi-daemon 0.6.22 starting up.Aug 26 10:22:29 Seqlimson avahi-daemon[4946]: Successfully called chroot().Aug 26 10:22:29 Seqlimson avahi-daemon[4946]: Successfully dropped remaining capabilities.Aug 26 10:22:29 Seqlimson avahi-daemon[4946]: No service file found in /etc/avahi/services.Aug 26 10:22:29 Seqlimson avahi-daemon[4946]: Network interface enumeration completed.Aug 26 10:22:29 Seqlimson avahi-daemon[4946]: Registering HINFO record with values 'I686'/'LINUX'.Aug 26 10:22:29 Seqlimson avahi-daemon[4946]: Server startup complete. Host name is Seqlimson.local. Local service cookie is 2020085695.Aug 26 10:22:30 Seqlimson nmbd[5035]: [2008/08/26 10:22:30, 0] nmbd/nmbd_subnetdb.c:create_subnets(190) Aug 26 10:22:30 Seqlimson nmbd[5035]: create_subnets: No local interfaces ! Aug 26 10:22:30 Seqlimson nmbd[5035]: [2008/08/26 10:22:30, 0] nmbd/nmbd_subnetdb.c:create_subnets(191) Aug 26 10:22:30 Seqlimson nmbd[5035]: create_subnets: Waiting for an interface to appear ... Aug 26 10:22:30 Seqlimson winbindd[5054]: [2008/08/26 10:22:30, 0] nsswitch/winbindd_cache.c:initialize_winbindd_cache(2222) Aug 26 10:22:30 Seqlimson winbindd[5054]: initialize_winbindd_cache: clearing cache and re-creating with version number 1 Aug 26 10:22:30 Seqlimson winbindd[5115]: [2008/08/26 10:22:30, 0] nsswitch/idmap.c:idmap_init(702) Aug 26 10:22:30 Seqlimson winbindd[5115]: ERROR: Initialization failed for alloc backend tdb, deferred! Aug 26 10:22:30 Seqlimson winbindd[5115]: [2008/08/26 10:22:30, 0] nsswitch/idmap.c:idmap_alloc_init(750) Aug 26 10:22:30 Seqlimson winbindd[5115]: ERROR: Initialization failed for alloc backend, deferred! Aug 26 10:22:30 Seqlimson smbd[5037]: [2008/08/26 10:22:30, 0] auth/auth_util.c:create_builtin_administrators(792) Aug 26 10:22:30 Seqlimson smbd[5037]: create_builtin_administrators: Failed to create Administrators Aug 26 10:22:30 Seqlimson winbindd[5115]: [2008/08/26 10:22:30, 0] nsswitch/idmap.c:idmap_alloc_init(750) Aug 26 10:22:30 Seqlimson winbindd[5115]: ERROR: Initialization failed for alloc backend, deferred! Aug 26 10:22:30 Seqlimson smbd[5037]: [2008/08/26 10:22:30, 0] auth/auth_util.c:create_builtin_users(758) Aug 26 10:22:30 Seqlimson smbd[5037]: create_builtin_users: Failed to create Users Aug 26 10:22:30 Seqlimson winbindd[5095]: [2008/08/26 10:22:30, 0] nsswitch/winbindd_passdb.c:sid_to_name(130) Aug 26 10:22:30 Seqlimson winbindd[5095]: Possible deadlock: Trying to lookup SID S-1-0-0 with passdb backend Aug 26 10:22:30 Seqlimson winbindd[5095]: [2008/08/26 10:22:30, 0] nsswitch/winbindd_passdb.c:sid_to_name(130) Aug 26 10:22:30 Seqlimson winbindd[5095]: Possible deadlock: Trying to lookup SID S-1-1-0 with passdb backend Aug 26 10:22:30 Seqlimson winbindd[5095]: [2008/08/26 10:22:30, 0] nsswitch/winbindd_passdb.c:sid_to_name(130) Aug 26 10:22:30 Seqlimson winbindd[5095]: Possible deadlock: Trying to lookup SID S-1-5-2 with passdb backend Aug 26 10:22:31 Seqlimson hcid[5249]: Bluetooth HCI daemonAug 26 10:22:31 Seqlimson NetworkManager: <info> eth0: Device is fully-supported using driver 'e1000e'. Aug 26 10:22:31 Seqlimson NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start Aug 26 10:22:31 Seqlimson NetworkManager: <info> nm_device_init(): device's worker thread started, continuing. Aug 26 10:22:31 Seqlimson NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'. Aug 26 10:22:31 Seqlimson NetworkManager: <info> Deactivating device eth0. Aug 26 10:22:31 Seqlimson NetworkManager: <debug> [1219726351.608435] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_model_DVD__RW_DH_16W1S'). Aug 26 10:22:31 Seqlimson hcid[5249]: Starting SDP serverAug 26 10:22:31 Seqlimson hcid[5249]: Created local server at unix:abstract=/var/run/dbus-SlkBlNOkJr,guid=722aa61ec691a8553ffec9a248b38c0fAug 26 10:22:31 Seqlimson NetworkManager: <debug> [1219726351.677262] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). Aug 26 10:22:31 Seqlimson audio[5282]: Bluetooth Audio daemonAug 26 10:22:31 Seqlimson audio[5282]: Unix socket created: 5Aug 26 10:22:31 Seqlimson audio[5282]: audio.conf: Key file does not have key 'Enable'Aug 26 10:22:31 Seqlimson audio[5282]: audio.conf: Key file does not have key 'Disable'Aug 26 10:22:31 Seqlimson input[5287]: Bluetooth Input daemonAug 26 10:22:31 Seqlimson input[5287]: Registered input manager path:/org/bluez/inputAug 26 10:22:31 Seqlimson audio[5282]: add_service_record: got record id 0x10000Aug 26 10:22:31 Seqlimson audio[5282]: audio.conf: Key file does not have key 'Disable'Aug 26 10:22:31 Seqlimson audio[5282]: audio.conf: Key file does not have group 'A2DP'Aug 26 10:22:31 Seqlimson last message repeated 3 timesAug 26 10:22:31 Seqlimson audio[5282]: SEP 0x806d2b0 registered: type:0 codec:0 seid:1Aug 26 10:22:31 Seqlimson audio[5282]: add_service_record: got record id 0x10001Aug 26 10:22:31 Seqlimson audio[5282]: add_service_record: got record id 0x10002Aug 26 10:22:31 Seqlimson audio[5282]: add_service_record: got record id 0x10003Aug 26 10:22:31 Seqlimson audio[5282]: Registered manager path:/org/bluez/audioAug 26 10:22:34 Seqlimson NetworkManager: <debug> [1219726354.386407] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_8086_29b2_drm_i915_card0'). Aug 26 10:22:34 Seqlimson NetworkManager: <info> Will activate wired connection 'eth0' because it now has a link. Aug 26 10:22:34 Seqlimson NetworkManager: <info> SWITCH: no current connection, found better connection 'eth0'. Aug 26 10:22:34 Seqlimson NetworkManager: <info> Will activate connection 'eth0'. Aug 26 10:22:34 Seqlimson NetworkManager: <info> Device eth0 activation scheduled... Aug 26 10:22:34 Seqlimson NetworkManager: <info> Activation (eth0) started... Aug 26 10:22:34 Seqlimson NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Aug 26 10:22:34 Seqlimson NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Aug 26 10:22:34 Seqlimson NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Aug 26 10:22:34 Seqlimson NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Aug 26 10:22:34 Seqlimson NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Aug 26 10:22:34 Seqlimson NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Aug 26 10:22:34 Seqlimson NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Aug 26 10:22:34 Seqlimson NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Aug 26 10:22:34 Seqlimson NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Aug 26 10:22:35 Seqlimson NetworkManager: <info> Activation (eth0) Beginning DHCP transaction. Aug 26 10:22:35 Seqlimson NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Aug 26 10:22:35 Seqlimson NetworkManager: <info> DHCP daemon state is now 12 (successfully started) for interface eth0 Aug 26 10:22:36 Seqlimson avahi-daemon[4946]: Registering new address record for fe80::21a:a0ff:fee1:3ea1 on eth0.*.Aug 26 10:22:36 Seqlimson NetworkManager: <info> DHCP daemon state is now 1 (starting) for interface eth0 Aug 26 10:22:39 Seqlimson dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4Aug 26 10:22:43 Seqlimson dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8Aug 26 10:22:51 Seqlimson dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7Aug 26 10:22:51 Seqlimson hcid[5249]: Default passkey agent (:1.22, /org/bluez/passkey) registeredAug 26 10:22:51 Seqlimson hcid[5249]: Default authorization agent (:1.22, /org/bluez/auth) registeredAug 26 10:22:55 Seqlimson NetworkManager: <info> Updating allowed wireless network lists. Aug 26 10:22:55 Seqlimson NetworkManager: <WARN> nm_dbus_get_networks_cb(): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored.. Aug 26 10:22:58 Seqlimson dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13Aug 26 10:23:11 Seqlimson dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21Aug 26 10:23:11 Seqlimson dhclient: DHCPOFFER of 192.168.0.158 from 192.168.0.254Aug 26 10:23:11 Seqlimson dhclient: DHCPREQUEST of 192.168.0.158 on eth0 to 255.255.255.255 port 67Aug 26 10:23:11 Seqlimson dhclient: DHCPACK of 192.168.0.158 from 192.168.0.254Aug 26 10:23:11 Seqlimson avahi-daemon[4946]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.158.Aug 26 10:23:11 Seqlimson avahi-daemon[4946]: New relevant interface eth0.IPv4 for mDNS.Aug 26 10:23:11 Seqlimson avahi-daemon[4946]: Registering new address record for 192.168.0.158 on eth0.IPv4.Aug 26 10:23:11 Seqlimson NetworkManager: <info> DHCP daemon state is now 2 (bound) for interface eth0 Aug 26 10:23:11 Seqlimson NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) scheduled... Aug 26 10:23:11 Seqlimson NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) started... Aug 26 10:23:11 Seqlimson dhclient: bound to 192.168.0.158 -- renewal in 20609 seconds.Aug 26 10:23:12 Seqlimson NetworkManager: <info> Retrieved the following IP4 configuration from the DHCP daemon: Aug 26 10:23:12 Seqlimson NetworkManager: <info> address 192.168.0.158 Aug 26 10:23:12 Seqlimson NetworkManager: <info> netmask 255.255.255.0 Aug 26 10:23:12 Seqlimson NetworkManager: <info> broadcast 192.168.0.255 Aug 26 10:23:12 Seqlimson NetworkManager: <info> gateway 192.168.0.254 Aug 26 10:23:12 Seqlimson NetworkManager: <info> nameserver 202.56.250.5 Aug 26 10:23:12 Seqlimson NetworkManager: <info> nameserver 202.56.250.6 Aug 26 10:23:12 Seqlimson NetworkManager: <info> nameserver 202.56.240.5 Aug 26 10:23:12 Seqlimson NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled... Aug 26 10:23:12 Seqlimson NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) complete. Aug 26 10:23:12 Seqlimson NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... Aug 26 10:23:12 Seqlimson avahi-daemon[4946]: Withdrawing address record for 192.168.0.158 on eth0.Aug 26 10:23:12 Seqlimson avahi-daemon[4946]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.158.Aug 26 10:23:12 Seqlimson avahi-daemon[4946]: Interface eth0.IPv4 no longer relevant for mDNS.Aug 26 10:23:12 Seqlimson avahi-daemon[4946]: Withdrawing address record for fe80::21a:a0ff:fee1:3ea1 on eth0.Aug 26 10:23:12 Seqlimson avahi-daemon[4946]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.158.Aug 26 10:23:12 Seqlimson avahi-daemon[4946]: New relevant interface eth0.IPv4 for mDNS.Aug 26 10:23:12 Seqlimson avahi-daemon[4946]: Registering new address record for 192.168.0.158 on eth0.IPv4.Aug 26 10:23:13 Seqlimson NetworkManager: <info> Clearing nscd hosts cache. Aug 26 10:23:13 Seqlimson NetworkManager: <WARN> nm_spawn_process(): nm_spawn_process('/usr/sbin/nscd -i hosts'): could not spawn process. (Failed to execute child process "/usr/sbin/nscd" (No such file or directory)) Aug 26 10:23:13 Seqlimson NetworkManager: <info> Activation (eth0) successful, device activated. Aug 26 10:23:13 Seqlimson NetworkManager: <info> Activation (eth0) Finish handler scheduled. Aug 26 10:23:13 Seqlimson NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. Aug 26 10:23:14 Seqlimson avahi-daemon[4946]: Registering new address record for fe80::21a:a0ff:fee1:3ea1 on eth0.*.Aug 26 10:23:15 Seqlimson ntpdate[5995]: step time server 91.189.94.4 offset -7.589597 secAug 26 10:51:36 Seqlimson smbd[6201]: [2008/08/26 10:51:36, 0] lib/util_sock.c:get_peer_addr(1224) Aug 26 10:51:36 Seqlimson smbd[6201]: getpeername failed. Error was Transport endpoint is not connected Aug 26 10:51:36 Seqlimson smbd[6201]: [2008/08/26 10:51:36, 0] lib/util_sock.c:write_data(562) Aug 26 10:51:36 Seqlimson smbd[6201]: write_data: write failure in writing to client 192.168.0.48. Error Connection reset by peer Aug 26 10:51:36 Seqlimson smbd[6201]: [2008/08/26 10:51:36, 0] lib/util_sock.c:send_smb(761) Aug 26 10:51:36 Seqlimson smbd[6201]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 26 10:53:03 Seqlimson smbd[6209]: [2008/08/26 10:53:03, 0] lib/util_sock.c:get_peer_addr(1224) Aug 26 10:53:03 Seqlimson smbd[6209]: getpeername failed. Error was Transport endpoint is not connected Aug 26 10:53:03 Seqlimson smbd[6209]: [2008/08/26 10:53:03, 0] lib/util_sock.c:write_data(562) Aug 26 10:53:03 Seqlimson smbd[6209]: write_data: write failure in writing to client 192.168.0.48. Error Connection reset by peer Aug 26 10:53:03 Seqlimson smbd[6209]: [2008/08/26 10:53:03, 0] lib/util_sock.c:send_smb(761) Aug 26 10:53:03 Seqlimson smbd[6209]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 26 11:10:06 Seqlimson smbd[5037]: [2008/08/26 11:10:06, 0] lib/util_sock.c:get_peer_addr(1224) Aug 26 11:10:06 Seqlimson smbd[5037]: getpeername failed. Error was Transport endpoint is not connected Aug 26 11:10:06 Seqlimson smbd[6575]: [2008/08/26 11:10:06, 0] lib/util_sock.c:get_peer_addr(1224) Aug 26 11:10:06 Seqlimson smbd[6575]: getpeername failed. Error was Transport endpoint is not connected Aug 26 11:10:06 Seqlimson smbd[6575]: [2008/08/26 11:10:06, 0] lib/util_sock.c:write_data(562) Aug 26 11:10:06 Seqlimson smbd[6575]: write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer Aug 26 11:10:06 Seqlimson smbd[6575]: [2008/08/26 11:10:06, 0] lib/util_sock.c:send_smb(761) Aug 26 11:10:06 Seqlimson smbd[6575]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 26 11:22:02 Seqlimson smbd[6586]: [2008/08/26 11:22:02, 0] lib/util_sock.c:write_data(562) Aug 26 11:22:02 Seqlimson smbd[6586]: write_data: write failure in writing to client 192.168.0.214. Error Connection reset by peer Aug 26 11:22:02 Seqlimson smbd[6586]: [2008/08/26 11:22:02, 0] lib/util_sock.c:send_smb(761) Aug 26 11:22:02 Seqlimson smbd[6586]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 26 12:09:49 Seqlimson smbd[6672]: [2008/08/26 12:09:49, 0] lib/util_sock.c:write_data(562) Aug 26 12:09:49 Seqlimson smbd[6672]: write_data: write failure in writing to client 192.168.0.32. Error Connection reset by peer Aug 26 12:09:49 Seqlimson smbd[6672]: [2008/08/26 12:09:49, 0] lib/util_sock.c:send_smb(761) Aug 26 12:09:49 Seqlimson smbd[6672]: Error writing 4 bytes to client. -1. (Connection reset by peer) Aug 26 12:25:23 Seqlimson audio[5282]: /org/bluez/audio: org.bluez.audio.Manager.ListDevices()Aug 26 12:25:23 Seqlimson input[5287]: /org/bluez/input: org.bluez.input.Manager.ListDevices()Aug 26 14:30:30 Seqlimson smbd[5037]: [2008/08/26 14:30:30, 0] lib/util_sock.c:get_peer_addr(1224) Aug 26 14:30:30 Seqlimson smbd[5037]: getpeername failed. Error was Transport endpoint is not connected Aug 26 14:30:30 Seqlimson smbd[6992]: [2008/08/26 14:30:30, 0] lib/util_sock.c:get_peer_addr(1224) Aug 26 14:30:30 Seqlimson smbd[6992]: getpeername failed. Error was Transport endpoint is not connected Aug 26 14:30:30 Seqlimson smbd[6992]: [2008/08/26 14:30:30, 0] lib/util_sock.c:write_data(562) Aug 26 14:30:30 Seqlimson smbd[6992]: write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer Aug 26 14:30:30 Seqlimson smbd[6992]: [2008/08/26 14:30:30, 0] lib/util_sock.c:send_smb(761) Aug 26 14:30:30 Seqlimson smbd[6992]: Error writing 4 bytes to client. -1. (Connection reset by peer) xorgLog:This is a pre-release version of the X server from The X.Org Foundation.It is not supported in any way.Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.Select the "xorg" product for bugs you find in this release.Before reporting bugs in pre-release versions please check thelatest version in the X.Org Foundation git repository.See http://wiki.x.org/wiki/GitPage for git access instructions.X.Org X Server 1.4.0.90Release Date: 5 September 2007X Protocol Version 11, Revision 0Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9.2)Current Operating System: Linux Seqlimson 2.6.24-19-generic #1 SMP Fri Jul 11 23:41:49 UTC 2008 i686Build Date: 13 June 2008 01:08:21AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version.Module Loader presentMarkers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown.(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 26 10:22:33 2008(==) Using config file: "/etc/X11/xorg.conf"(==) ServerLayout "Default Layout"(**) |-->Screen "Default Screen" (0)(**) | |-->Monitor "Configured Monitor"(**) | |-->Device "Configured Video Device"(==) Automatically adding devices(==) Automatically enabling devices(==) No FontPath specified. Using compiled-in default.(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path.(==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType(==) RgbPath set to "/etc/X11/rgb"(==) ModulePath set to "/usr/lib/xorg/modules"(==) |-->Input Device "Configured Mouse"(==) |-->Input Device "Generic Keyboard"(==) The core pointer device wasn't specified explicitly in the layout. Using the first core pointer device.(==) The core keyboard device wasn't specified explicitly in the layout. Using the first keyboard device.(II) Open ACPI successful (/var/run/acpid.socket)(II) Loader magic: 0x81dc500(II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5(II) Loader running on linux(II) LoadModule: "pcidata"(II) Loading /usr/lib/xorg/modules//libpcidata.so(II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0(++) using VT number 7(II) PCI: PCI scan (all values are in hex)(II) PCI: 00:00:0: chip 8086,29b0 card 1028,0211 rev 02 class 06,00,00 hdr 00(II) PCI: 00:01:0: chip 8086,29b1 card 0000,0000 rev 02 class 06,04,00 hdr 01(II) PCI: 00:02:0: chip 8086,29b2 card 1028,0211 rev 02 class 03,00,00 hdr 80(II) PCI: 00:02:1: chip 8086,29b3 card 1028,0211 rev 02 class 03,80,00 hdr 80(II) PCI: 00:03:0: chip 8086,29b4 card 1028,0211 rev 02 class 07,80,00 hdr 80(II) PCI: 00:03:2: chip 8086,29b6 card 1028,0211 rev 02 class 01,01,85 hdr 00(II) PCI: 00:03:3: chip 8086,29b7 card 1028,0211 rev 02 class 07,00,02 hdr 00(II) PCI: 00:19:0: chip 8086,10bd card 1028,0211 rev 02 class 02,00,00 hdr 00(II) PCI: 00:1a:0: chip 8086,2937 card 1028,0211 rev 02 class 0c,03,00 hdr 80(II) PCI: 00:1a:1: chip 8086,2938 card 1028,0211 rev 02 class 0c,03,00 hdr 00(II) PCI: 00:1a:7: chip 8086,293c card 1028,0211 rev 02 class 0c,03,20 hdr 00(II) PCI: 00:1b:0: chip 8086,293e card 1028,0211 rev 02 class 04,03,00 hdr 00(II) PCI: 00:1c:0: chip 8086,2940 card 0000,0000 rev 02 class 06,04,00 hdr 81(II) PCI: 00:1d:0: chip 8086,2934 card 1028,0211 rev 02 class 0c,03,00 hdr 80(II) PCI: 00:1d:1: chip 8086,2935 card 1028,0211 rev 02 class 0c,03,00 hdr 00(II) PCI: 00:1d:2: chip 8086,2936 card 1028,0211 rev 02 class 0c,03,00 hdr 00(II) PCI: 00:1d:7: chip 8086,293a card 1028,0211 rev 02 class 0c,03,20 hdr 00(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 92 class 06,04,01 hdr 01(II) PCI: 00:1f:0: chip 8086,2914 card 0000,0000 rev 02 class 06,01,00 hdr 80(II) PCI: 00:1f:2: chip 8086,2920 card 1028,0211 rev 02 class 01,01,8a hdr 00(II) PCI: 00:1f:3: chip 8086,2930 card 1028,0211 rev 02 class 0c,05,00 hdr 00(II) PCI: 00:1f:5: chip 8086,2926 card 1028,0211 rev 02 class 01,01,85 hdr 00(II) PCI: End of PCI scan(II) Intel Bridge workaround enabled(II) Host-to-PCI bridge:(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)(II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B](II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B](II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B](II) PCI-to-PCI bridge:(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)(II) PCI-to-PCI bridge:(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)(II) Subtractive PCI-to-PCI bridge:(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)(II) PCI-to-ISA bridge:(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)(--) PCI:*(0:2:0) Intel Corporation Integrated Graphics Controller rev 2, Mem @ 0x80100000/19, 0xd0000000/28, 0x80000000/20, I/O @ 0xec90/3(--) PCI: (0:2:1) Intel Corporation Integrated Graphics Controller rev 2, Mem @ 0x80180000/19(II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B](II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B](II) Active PCI resource ranges: [0] -1 0 0x80226400 - 0x802264ff (0x100) MX[B] [1] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [2] -1 0 0x80220000 - 0x80223fff (0x4000) MX[B] [3] -1 0 0x80226000 - 0x802263ff (0x400) MX[B] [4] -1 0 0x80225000 - 0x80225fff (0x1000) MX[B] [5] -1 0 0x80200000 - 0x8021ffff (0x20000) MX[B] [6] -1 0 0x80224000 - 0x80224fff (0x1000) MX[B] [7] -1 0 0xfedad000 - 0xfedad00f (0x10) MX[B] [8] -1 0 0x80180000 - 0x801fffff (0x80000) MX[B](B) [9] -1 0 0x80000000 - 0x800fffff (0x100000) MX[B](B) [10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [11] -1 0 0x80100000 - 0x8017ffff (0x80000) MX[B](B) [12] -1 0 0x0000ecb0 - 0x0000ecbf (0x10) IX[B] [13] -1 0 0x0000fed0 - 0x0000fedf (0x10) IX[B] [14] -1 0 0x0000fe70 - 0x0000fe73 (0x4) IX[B] [15] -1 0 0x0000fe60 - 0x0000fe67 (0x8) IX[B] [16] -1 0 0x0000fe50 - 0x0000fe53 (0x4) IX[B] [17] -1 0 0x0000fe40 - 0x0000fe47 (0x8) IX[B] [18] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [19] -1 0 0x0000eca0 - 0x0000ecaf (0x10) IX[B] [20] -1 0 0x0000fec0 - 0x0000fecf (0x10) IX[B] [21] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [22] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [23] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [25] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [26] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [27] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [28] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [29] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [30] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [31] -1 0 0x0000ec98 - 0x0000ec9f (0x8) IX[B] [32] -1 0 0x0000fef0 - 0x0000feff (0x10) IX[B] [33] -1 0 0x0000feb0 - 0x0000feb3 (0x4) IX[B] [34] -1 0 0x0000fea0 - 0x0000fea7 (0x8) IX[B] [35] -1 0 0x0000fe90 - 0x0000fe93 (0x4) IX[B] [36] -1 0 0x0000fe80 - 0x0000fe87 (0x8) IX[B] [37] -1 0 0x0000ec90 - 0x0000ec97 (0x8) IX[B](B)(II) Active PCI resource ranges after removing overlaps: [0] -1 0 0x80226400 - 0x802264ff (0x100) MX[B] [1] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [2] -1 0 0x80220000 - 0x80223fff (0x4000) MX[B] [3] -1 0 0x80226000 - 0x802263ff (0x400) MX[B] [4] -1 0 0x80225000 - 0x80225fff (0x1000) MX[B] [5] -1 0 0x80200000 - 0x8021ffff (0x20000) MX[B] [6] -1 0 0x80224000 - 0x80224fff (0x1000) MX[B] [7] -1 0 0xfedad000 - 0xfedad00f (0x10) MX[B] [8] -1 0 0x80180000 - 0x801fffff (0x80000) MX[B](B) [9] -1 0 0x80000000 - 0x800fffff (0x100000) MX[B](B) [10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [11] -1 0 0x80100000 - 0x8017ffff (0x80000) MX[B](B) [12] -1 0 0x0000ecb0 - 0x0000ecbf (0x10) IX[B] [13] -1 0 0x0000fed0 - 0x0000fedf (0x10) IX[B] [14] -1 0 0x0000fe70 - 0x0000fe73 (0x4) IX[B] [15] -1 0 0x0000fe60 - 0x0000fe67 (0x8) IX[B] [16] -1 0 0x0000fe50 - 0x0000fe53 (0x4) IX[B] [17] -1 0 0x0000fe40 - 0x0000fe47 (0x8) IX[B] [18] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [19] -1 0 0x0000eca0 - 0x0000ecaf (0x10) IX[B] [20] -1 0 0x0000fec0 - 0x0000fecf (0x10) IX[B] [21] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [22] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [23] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [25] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [26] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [27] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [28] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [29] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [30] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [31] -1 0 0x0000ec98 - 0x0000ec9f (0x8) IX[B] [32] -1 0 0x0000fef0 - 0x0000feff (0x10) IX[B] [33] -1 0 0x0000feb0 - 0x0000feb3 (0x4) IX[B] [34] -1 0 0x0000fea0 - 0x0000fea7 (0x8) IX[B] [35] -1 0 0x0000fe90 - 0x0000fe93 (0x4) IX[B] [36] -1 0 0x0000fe80 - 0x0000fe87 (0x8) IX[B] [37] -1 0 0x0000ec90 - 0x0000ec97 (0x8) IX[B](B)(II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B](II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x80226400 - 0x802264ff (0x100) MX[B] [5] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [6] -1 0 0x80220000 - 0x80223fff (0x4000) MX[B] [7] -1 0 0x80226000 - 0x802263ff (0x400) MX[B] [8] -1 0 0x80225000 - 0x80225fff (0x1000) MX[B] [9] -1 0 0x80200000 - 0x8021ffff (0x20000) MX[B] [10] -1 0 0x80224000 - 0x80224fff (0x1000) MX[B] [11] -1 0 0xfedad000 - 0xfedad00f (0x10) MX[B] [12] -1 0 0x80180000 - 0x801fffff (0x80000) MX[B](B) [13] -1 0 0x80000000 - 0x800fffff (0x100000) MX[B](B) [14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [15] -1 0 0x80100000 - 0x8017ffff (0x80000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000ecb0 - 0x0000ecbf (0x10) IX[B] [19] -1 0 0x0000fed0 - 0x0000fedf (0x10) IX[B] [20] -1 0 0x0000fe70 - 0x0000fe73 (0x4) IX[B] [21] -1 0 0x0000fe60 - 0x0000fe67 (0x8) IX[B] [22] -1 0 0x0000fe50 - 0x0000fe53 (0x4) IX[B] [23] -1 0 0x0000fe40 - 0x0000fe47 (0x8) IX[B] [24] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [25] -1 0 0x0000eca0 - 0x0000ecaf (0x10) IX[B] [26] -1 0 0x0000fec0 - 0x0000fecf (0x10) IX[B] [27] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [28] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [29] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [31] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [32] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [33] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [34] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [35] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [36] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [37] -1 0 0x0000ec98 - 0x0000ec9f (0x8) IX[B] [38] -1 0 0x0000fef0 - 0x0000feff (0x10) IX[B] [39] -1 0 0x0000feb0 - 0x0000feb3 (0x4) IX[B] [40] -1 0 0x0000fea0 - 0x0000fea7 (0x8) IX[B] [41] -1 0 0x0000fe90 - 0x0000fe93 (0x4) IX[B] [42] -1 0 0x0000fe80 - 0x0000fe87 (0x8) IX[B] [43] -1 0 0x0000ec90 - 0x0000ec97 (0x8) IX[B](B)(II) LoadModule: "extmod"(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so(II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3(II) Loading extension SHAPE(II) Loading extension MIT-SUNDRY-NONSTANDARD(II) Loading extension BIG-REQUESTS(II) Loading extension SYNC(II) Loading extension MIT-SCREEN-SAVER(II) Loading extension XC-MISC(II) Loading extension XFree86-VidModeExtension(II) Loading extension XFree86-Misc(II) Loading extension XFree86-DGA(II) Loading extension DPMS(II) Loading extension TOG-CUP(II) Loading extension Extended-Visual-Information(II) Loading extension XVideo(II) Loading extension XVideo-MotionCompensation(II) Loading extension X-Resource(II) LoadModule: "dbe"(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so(II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3(II) Loading extension DOUBLE-BUFFER(II) LoadModule: "glx"(II) Loading /usr/lib/xorg/modules/extensions//libglx.so(II) Module glx: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3(==) AIGLX enabled(II) Loading extension GLX(II) LoadModule: "freetype"(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.0.90, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5(II) Loading font FreeType(II) LoadModule: "record"(II) Loading /usr/lib/xorg/modules/extensions//librecord.so(II) Module record: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3(II) Loading extension RECORD(II) LoadModule: "dri"(II) Loading /usr/lib/xorg/modules/extensions//libdri.so(II) Module dri: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3(II) Loading extension XFree86-DRI(II) Matched intel from file name intel.ids in autoconfig(==) Matched intel for the autoconfigured driver(==) Assigned the driver to the xf86ConfigLayout(II) LoadModule: "intel"(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so(II) Module intel: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 2.2.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0(II) LoadModule: "mouse"(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so(II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.2.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0(II) LoadModule: "kbd"(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so(II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0(II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device(II) Primary Device is: PCI 00:02:0(--) Assigning device section with no busID to primary device(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found(--) Chipset Q35 found(II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x80226400 - 0x802264ff (0x100) MX[B] [5] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [6] -1 0 0x80220000 - 0x80223fff (0x4000) MX[B] [7] -1 0 0x80226000 - 0x802263ff (0x400) MX[B] [8] -1 0 0x80225000 - 0x80225fff (0x1000) MX[B] [9] -1 0 0x80200000 - 0x8021ffff (0x20000) MX[B] [10] -1 0 0x80224000 - 0x80224fff (0x1000) MX[B] [11] -1 0 0xfedad000 - 0xfedad00f (0x10) MX[B] [12] -1 0 0x80180000 - 0x801fffff (0x80000) MX[B](B) [13] -1 0 0x80000000 - 0x800fffff (0x100000) MX[B](B) [14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [15] -1 0 0x80100000 - 0x8017ffff (0x80000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000ecb0 - 0x0000ecbf (0x10) IX[B] [19] -1 0 0x0000fed0 - 0x0000fedf (0x10) IX[B] [20] -1 0 0x0000fe70 - 0x0000fe73 (0x4) IX[B] [21] -1 0 0x0000fe60 - 0x0000fe67 (0x8) IX[B] [22] -1 0 0x0000fe50 - 0x0000fe53 (0x4) IX[B] [23] -1 0 0x0000fe40 - 0x0000fe47 (0x8) IX[B] [24] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [25] -1 0 0x0000eca0 - 0x0000ecaf (0x10) IX[B] [26] -1 0 0x0000fec0 - 0x0000fecf (0x10) IX[B] [27] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [28] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [29] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [31] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [32] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [33] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [34] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [35] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [36] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [37] -1 0 0x0000ec98 - 0x0000ec9f (0x8) IX[B] [38] -1 0 0x0000fef0 - 0x0000feff (0x10) IX[B] [39] -1 0 0x0000feb0 - 0x0000feb3 (0x4) IX[B] [40] -1 0 0x0000fea0 - 0x0000fea7 (0x8) IX[B] [41] -1 0 0x0000fe90 - 0x0000fe93 (0x4) IX[B] [42] -1 0 0x0000fe80 - 0x0000fe87 (0x8) IX[B] [43] -1 0 0x0000ec90 - 0x0000ec97 (0x8) IX[B](B)(II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x80226400 - 0x802264ff (0x100) MX[B] [5] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [6] -1 0 0x80220000 - 0x80223fff (0x4000) MX[B] [7] -1 0 0x80226000 - 0x802263ff (0x400) MX[B] [8] -1 0 0x80225000 - 0x80225fff (0x1000) MX[B] [9] -1 0 0x80200000 - 0x8021ffff (0x20000) MX[B] [10] -1 0 0x80224000 - 0x80224fff (0x1000) MX[B] [11] -1 0 0xfedad000 - 0xfedad00f (0x10) MX[B] [12] -1 0 0x80180000 - 0x801fffff (0x80000) MX[B](B) [13] -1 0 0x80000000 - 0x800fffff (0x100000) MX[B](B) [14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [15] -1 0 0x80100000 - 0x8017ffff (0x80000) MX[B](B) [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000ecb0 - 0x0000ecbf (0x10) IX[B] [22] -1 0 0x0000fed0 - 0x0000fedf (0x10) IX[B] [23] -1 0 0x0000fe70 - 0x0000fe73 (0x4) IX[B] [24] -1 0 0x0000fe60 - 0x0000fe67 (0x8) IX[B] [25] -1 0 0x0000fe50 - 0x0000fe53 (0x4) IX[B] [26] -1 0 0x0000fe40 - 0x0000fe47 (0x8) IX[B] [27] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [28] -1 0 0x0000eca0 - 0x0000ecaf (0x10) IX[B] [29] -1 0 0x0000fec0 - 0x0000fecf (0x10) IX[B] [30] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [31] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [32] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [34] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [35] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [36] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [37] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [38] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [39] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [40] -1 0 0x0000ec98 - 0x0000ec9f (0x8) IX[B] [41] -1 0 0x0000fef0 - 0x0000feff (0x10) IX[B] [42] -1 0 0x0000feb0 - 0x0000feb3 (0x4) IX[B] [43] -1 0 0x0000fea0 - 0x0000fea7 (0x8) IX[B] [44] -1 0 0x0000fe90 - 0x0000fe93 (0x4) IX[B] [45] -1 0 0x0000fe80 - 0x0000fe87 (0x8) IX[B] [46] -1 0 0x0000ec90 - 0x0000ec97 (0x8) IX[B](B) [47] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [48] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](II) Setting vga for screen 0.(II) Loading sub module "int10"(II) LoadModule: "int10"(II) Loading /usr/lib/xorg/modules//libint10.so(II) Module int10: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0(II) Loading sub module "vbe"(II) LoadModule: "vbe"(II) Loading /usr/lib/xorg/modules//libvbe.so(II) Module vbe: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.1.0 ABI class: X.Org Video Driver, version 2.0(II) Loading sub module "vgahw"(II) LoadModule: "vgahw"(II) Loading /usr/lib/xorg/modules//libvgahw.so(II) Module vgahw: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 0.1.0 ABI class: X.Org Video Driver, version 2.0(II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32(==) intel(0): Depth 24, (==) framebuffer bpp 32(==) intel(0): RGB weight 888(==) intel(0): Default visual is TrueColor(II) intel(0): Integrated Graphics Chipset: Intel(R) Q35(--) intel(0): Chipset: "Q35"(--) intel(0): Linear framebuffer at 0xD0000000(--) intel(0): IO registers at addr 0x80100000(II) intel(0): 2 display pipes available.(==) intel(0): Using EXA for acceleration(II) Loading sub module "ddc"(II) LoadModule: "ddc"(II) Module "ddc" already built-in(II) Loading sub module "i2c"(II) LoadModule: "i2c"(II) Module "i2c" already built-in(II) intel(0): Output VGA using monitor section Configured Monitor(II) intel(0): I2C bus "CRTDDC_A" initialized.(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.(II) intel(0): No SDVO device found on SDVOB(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.(II) intel(0): No SDVO device found on SDVOC(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): Using EDID range info for horizontal sync(II) intel(0): Using EDID range info for vertical refresh(II) intel(0): Printing DDC gathered Modelines:(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)(II) intel(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): Output VGA connected(II) intel(0): Output VGA using initial mode 1280x1024(II) intel(0): detected 1024 kB GTT.(II) intel(0): detected 7164 kB stolen memory.(==) intel(0): video overlay key set to 0x101fe(==) intel(0): Will not try to enable page flipping(==) intel(0): Triple buffering disabled(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)(**) intel(0): Display dimensions: (340, 270) mm(**) intel(0): DPI set to (95, 120)(II) Loading sub module "fb"(II) LoadModule: "fb"(II) Loading /usr/lib/xorg/modules//libfb.so(II) Module fb: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3(II) Loading sub module "exa"(II) LoadModule: "exa"(II) Loading /usr/lib/xorg/modules//libexa.so(II) Module exa: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 2.2.0 ABI class: X.Org Video Driver, version 2.0(II) Loading sub module "ramdac"(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in(II) intel(0): Comparing regs from server start up to After PreInit(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000b00(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000203 to 0x80000203(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS(WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS(==) Depth 24 pixmap format is 32 bpp(II) do I need RAC? No, I don't.(II) resource ranges after preInit: [0] 0 0 0x80000000 - 0x800fffff (0x100000) MS[B] [1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MS[B] [2] 0 0 0x80100000 - 0x8017ffff (0x80000) MS[B] [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0x80226400 - 0x802264ff (0x100) MX[B] [8] -1 0 0xff980800 - 0xff980bff (0x400) MX[B] [9] -1 0 0x80220000 - 0x80223fff (0x4000) MX[B] [10] -1 0 0x80226000 - 0x802263ff (0x400) MX[B] [11] -1 0 0x80225000 - 0x80225fff (0x1000) MX[B] [12] -1 0 0x80200000 - 0x8021ffff (0x20000) MX[B] [13] -1 0 0x80224000 - 0x80224fff (0x1000) MX[B] [14] -1 0 0xfedad000 - 0xfedad00f (0x10) MX[B] [15] -1 0 0x80180000 - 0x801fffff (0x80000) MX[B](B) [16] -1 0 0x80000000 - 0x800fffff (0x100000) MX[B](B) [17] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [18] -1 0 0x80100000 - 0x8017ffff (0x80000) MX[B](B) [19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [22] 0 0 0x0000ec90 - 0x0000ec97 (0x8) IS[B] [23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [25] -1 0 0x0000ecb0 - 0x0000ecbf (0x10) IX[B] [26] -1 0 0x0000fed0 - 0x0000fedf (0x10) IX[B] [27] -1 0 0x0000fe70 - 0x0000fe73 (0x4) IX[B] [28] -1 0 0x0000fe60 - 0x0000fe67 (0x8) IX[B] [29] -1 0 0x0000fe50 - 0x0000fe53 (0x4) IX[B] [30] -1 0 0x0000fe40 - 0x0000fe47 (0x8) IX[B] [31] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [32] -1 0 0x0000eca0 - 0x0000ecaf (0x10) IX[B] [33] -1 0 0x0000fec0 - 0x0000fecf (0x10) IX[B] [34] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [35] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [36] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [37] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [38] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [39] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [40] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [41] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B] [42] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [43] -1 0 0x0000ecc0 - 0x0000ecdf (0x20) IX[B] [44] -1 0 0x0000ec98 - 0x0000ec9f (0x8) IX[B] [45] -1 0 0x0000fef0 - 0x0000feff (0x10) IX[B] [46] -1 0 0x0000feb0 - 0x0000feb3 (0x4) IX[B] [47] -1 0 0x0000fea0 - 0x0000fea7 (0x8) IX[B] [48] -1 0 0x0000fe90 - 0x0000fe93 (0x4) IX[B] [49] -1 0 0x0000fe80 - 0x0000fe87 (0x8) IX[B] [50] -1 0 0x0000ec90 - 0x0000ec97 (0x8) IX[B](B) [51] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [52] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)(II) intel(0): Kernel reported 480512 total, 1 used(II) intel(0): I830CheckAvailableMemory: 1922044 kB availabledrmOpenDevice: node name is /dev/dri/card0drmOpenDevice: open result is -1, (No such device or address)drmOpenDevice: open result is -1, (No such device or address)drmOpenDevice: Open faileddrmOpenDevice: node name is /dev/dri/card0drmOpenDevice: open result is -1, (No such device or address)drmOpenDevice: open result is -1, (No such device or address)drmOpenDevice: Open faileddrmOpenByBusid: Searching for BusID pci:0000:00:02.0drmOpenDevice: node name is /dev/dri/card0drmOpenDevice: open result is 8, (OK)drmOpenByBusid: drmOpenMinor returns 8drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0(II) [drm] loaded kernel module for "i915" driver.(II) [drm] DRM interface version 1.3(II) [drm] DRM open master succeeded.(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.(II) intel(0): [drm] framebuffer mapped by ddx driver(II) intel(0): [drm] added 1 reserved context for kernel(II) intel(0): X context handle = 0x1(II) intel(0): [drm] installed DRM signal handler(==) intel(0): VideoRam: 262144 KB(**) intel(0): Framebuffer compression disabled(**) intel(0): Tiling enabled(II) intel(0): Attempting memory allocation with tiled buffers.(II) intel(0): Success.(II) intel(0): Increasing the scanline pitch to allow tiling mode (1280 -> 2048).(II) intel(0): [drm] Registers = 0x80100000(II) intel(0): [drm] ring buffer = 0xd0000000(II) intel(0): [drm] mapped front buffer at 0xd1000000, handle = 0xd1000000(II) intel(0): [drm] mapped back buffer at 0xd4000000, handle = 0xd4000000(II) intel(0): [drm] mapped depth buffer at 0xd5000000, handle = 0xd5000000(II) intel(0): [drm] mapped classic textures at 0xd6000000, handle = 0xd6000000(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432(II) intel(0): [dri] visual configs initialized(II) intel(0): Page Flipping disabled(WW) intel(0): Failed to set up write-combining range (0xd0000000,0x10000000)(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000(WW) intel(0): EXA greedy migration mode enabled.(II) EXA(0): Forcing greedy migration option(II) EXA(0): Offscreen pixmap area of 31457280 bytes(II) EXA(0): Driver registered support for the following operations:(II) Solid(II) Copy(II) Composite (RENDER acceleration)(==) intel(0): Backing store disabled(==) intel(0): Silken mouse enabled(II) intel(0): Initializing HW Cursor(II) intel(0): [DRI] installation complete(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)(II) intel(0): Fixed memory allocation layout:(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)(II) intel(0): 0x00032000-0x00032fff: overlay registers (4 kB)(II) intel(0): 0x00033000-0x00033fff: HW status (4 kB)(II) intel(0): 0x006ff000: end of stolen memory(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)(II) intel(0): 0x10000000: end of aperture(II) intel(0): Output configuration:(II) intel(0): Pipe A is on(II) intel(0): Display plane A is now enabled and connected to pipe A.(II) intel(0): Pipe B is off(II) intel(0): Display plane B is now disabled and connected to pipe B.(II) intel(0): Output VGA is connected to pipe A(II) intel(0): [drm] dma control initialized, using IRQ 16(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.(II) intel(0): DPMS enabled(II) intel(0): Set up overlay video(II) intel(0): direct rendering: Enabled(--) RandR disabled(II) Initializing built-in extension MIT-SHM(II) Initializing built-in extension XInputExtension(II) Initializing built-in extension XTEST(II) Initializing built-in extension XKEYBOARD(II) Initializing built-in extension XC-APPGROUP(II) Initializing built-in extension XAccessControlExtension(II) Initializing built-in extension SECURITY(II) Initializing built-in extension XINERAMA(II) Initializing built-in extension XFIXES(II) Initializing built-in extension XFree86-Bigfont(II) Initializing built-in extension RENDER(II) Initializing built-in extension RANDR(II) Initializing built-in extension COMPOSITE(II) Initializing built-in extension DAMAGE(II) Initializing built-in extension XEVIEdrmOpenDevice: node name is /dev/dri/card0drmOpenDevice: open result is 9, (OK)drmOpenByBusid: Searching for BusID pci:0000:00:02.0drmOpenDevice: node name is /dev/dri/card0drmOpenDevice: open result is 9, (OK)drmOpenByBusid: drmOpenMinor returns 9drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0(WW) AIGLX: 3D driver claims to not support visual 0x23(WW) AIGLX: 3D driver claims to not support visual 0x24(WW) AIGLX: 3D driver claims to not support visual 0x25(WW) AIGLX: 3D driver claims to not support visual 0x26(WW) AIGLX: 3D driver claims to not support visual 0x27(WW) AIGLX: 3D driver claims to not support visual 0x28(WW) AIGLX: 3D driver claims to not support visual 0x29(WW) AIGLX: 3D driver claims to not support visual 0x2a(WW) AIGLX: 3D driver claims to not support visual 0x2b(WW) AIGLX: 3D driver claims to not support visual 0x2c(WW) AIGLX: 3D driver claims to not support visual 0x2d(WW) AIGLX: 3D driver claims to not support visual 0x2e(WW) AIGLX: 3D driver claims to not support visual 0x2f(WW) AIGLX: 3D driver claims to not support visual 0x30(WW) AIGLX: 3D driver claims to not support visual 0x31(WW) AIGLX: 3D driver claims to not support visual 0x32(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so(II) GLX: Initialized DRI GL provider for screen 0(II) intel(0): Setting screen physical size to 338 x 270(WW) Configured Mouse: No Device specified, looking for one...(II) Configured Mouse: Setting Device option to "/dev/input/mice"(--) Configured Mouse: Device: "/dev/input/mice"(==) Configured Mouse: Protocol: "Auto"(**) Option "CorePointer"(**) Configured Mouse: always reports core events(**) Option "Device" "/dev/input/mice"(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50(**) Configured Mouse: ZAxisMapping: buttons 4 and 5(**) Configured Mouse: Buttons: 9(**) Configured Mouse: Sensitivity: 1(**) Option "CoreKeyboard"(**) Generic Keyboard: always reports core events(**) Option "Protocol" "standard"(**) Generic Keyboard: Protocol: standard(**) Option "AutoRepeat" "500 30"(**) Option "XkbRules" "xorg"(**) Generic Keyboard: XkbRules: "xorg"(**) Option "XkbModel" "pc105"(**) Generic Keyboard: XkbModel: "pc105"(**) Option "XkbLayout" "us"(**) Generic Keyboard: XkbLayout: "us"(**) Option "CustomKeycodes" "off"(**) Generic Keyboard: CustomKeycodes disabled(II) evaluating device (Generic Keyboard)(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)(II) evaluating device (Configured Mouse)(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"(II) Configured Mouse: ps2EnableDataReporting: succeeded(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): Using hsync ranges from config file(II) intel(0): Using vrefresh ranges from config file(II) intel(0): Printing DDC gathered Modelines:(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)(II) intel(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): Using hsync ranges from config file(II) intel(0): Using vrefresh ranges from config file(II) intel(0): Printing DDC gathered Modelines:(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)(II) intel(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): Using hsync ranges from config file(II) intel(0): Using vrefresh ranges from config file(II) intel(0): Printing DDC gathered Modelines:(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)(II) intel(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): Using hsync ranges from config file(II) intel(0): Using vrefresh ranges from config file(II) intel(0): Printing DDC gathered Modelines:(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)(II) intel(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): Using hsync ranges from config file(II) intel(0): Using vrefresh ranges from config file(II) intel(0): Printing DDC gathered Modelines:(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)(II) intel(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)(II) intel(0): EDID vendor "DEL", prod id 16419SetClientVersion: 0 9(II) intel(0): EDID vendor "DEL", prod id 16419(II) intel(0): Using hsync ranges from config file(II) intel(0): Using vrefresh ranges from config file(II) intel(0): Printing DDC gathered Modelines:(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)(II) intel(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)(II) intel(0): EDID vendor "DEL", prod id 16419SetGrabKeysState - disabledSetGrabKeysState - enabledSetGrabKeysState - disabledSetGrabKeysState - enabledSetGrabKeysState - disabledSetGrabKeysState - enabledapt:# # deb cdrom:[Ubuntu 8.04.1 _Hardy Heron_ - Release i386 (20080701)]/ hardy main restricted# deb cdrom:[Ubuntu 8.04.1 _Hardy Heron_ - Release i386 (20080701)]/ hardy main restricted# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to# newer versions of the distribution.deb http://in.archive.ubuntu.com/ubuntu/ hardy main restricteddeb-src http://in.archive.ubuntu.com/ubuntu/ hardy main restricted## Major bug fix updates produced after the final release of the## distribution.deb http://in.archive.ubuntu.com/ubuntu/ hardy-updates main restricteddeb-src http://in.archive.ubuntu.com/ubuntu/ hardy-updates main restricted## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu## team, and may not be under a free licence. Please satisfy yourself as to## your rights to use the software. Also, please note that software in## universe WILL NOT receive any review or updates from the Ubuntu security## team.deb http://in.archive.ubuntu.com/ubuntu/ hardy universedeb-src http://in.archive.ubuntu.com/ubuntu/ hardy universedeb http://in.archive.ubuntu.com/ubuntu/ hardy-updates universedeb-src http://in.archive.ubuntu.com/ubuntu/ hardy-updates universe## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu## security team.deb http://in.archive.ubuntu.com/ubuntu/ hardy multiversedeb-src http://in.archive.ubuntu.com/ubuntu/ hardy multiversedeb http://in.archive.ubuntu.com/ubuntu/ hardy-updates multiversedeb-src http://in.archive.ubuntu.com/ubuntu/ hardy-updates multiverse## Uncomment the following two lines to add software from the 'backports'## repository.## N.B. software from this repository may not have been tested as## extensively as that contained in the main release, although it includes## newer versions of some applications which may provide useful features.## Also, please note that software in backports WILL NOT receive any review## or updates from the Ubuntu security team.# deb http://in.archive.ubuntu.com/ubuntu/ hardy-backports main restricted universe multiverse# deb-src http://in.archive.ubuntu.com/ubuntu/ hardy-backports main restricted universe multiverse## Uncomment the following two lines to add software from Canonical's## 'partner' repository. This software is not part of Ubuntu, but is## offered by Canonical and the respective vendors as a service to Ubuntu## users.# deb http://archive.canonical.com/ubuntu hardy partner# deb-src http://archive.canonical.com/ubuntu hardy partner# Line commented out by installer because it failed to verify:# deb http://security.ubuntu.com/ubuntu hardy-security main restricted# Line commented out by installer because it failed to verify:# deb-src http://security.ubuntu.com/ubuntu hardy-security main restricted# Line commented out by installer because it failed to verify:# deb http://security.ubuntu.com/ubuntu hardy-security universe# Line commented out by installer because it failed to verify:# deb-src http://security.ubuntu.com/ubuntu hardy-security universe# Line commented out by installer because it failed to verify:# deb http://security.ubuntu.com/ubuntu hardy-security multiverse# Line commented out by installer because it failed to verify:# deb-src http://security.ubuntu.com/ubuntu hardy-security multiverseifconfig:eth0 Link encap:Ethernet HWaddr 00:1a:a0:e1:3e:a1 inet addr:192.168.0.158 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21a:a0ff:fee1:3ea1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:298351 errors:0 dropped:0 overruns:0 frame:0 TX packets:158196 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:383467566 (365.7 MB) TX bytes:16904268 (16.1 MB) Memory:80200000-80220000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1568 errors:0 dropped:0 overruns:0 frame:0 TX packets:1568 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78400 (76.5 KB) TX bytes:78400 (76.5 KB)pci:Aug 21 18:20:06 Seqlimson kernel: [28163.996638] ip6_tables: (C) 2000-2006 Netfilter Core TeamAug 22 07:30:01 Seqlimson kernel: Inspecting /boot/System.map-2.6.24-19-genericAug 22 07:30:01 Seqlimson kernel: Loaded 27884 symbols from /boot/System.map-2.6.24-19-generic.Aug 22 07:30:01 Seqlimson kernel: Symbols match kernel version 2.6.24.Aug 22 07:30:01 Seqlimson kernel: Loaded 15463 symbols from 78 modules.Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Initializing cgroup subsys cpusetAug 22 07:30:01 Seqlimson kernel: [ 0.000000] Initializing cgroup subsys cpuAug 22 07:30:01 Seqlimson kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] BIOS-provided physical RAM map:Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d4ff800 (usable)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] BIOS-e820: 000000007d4ff800 - 000000007d553c00 (ACPI NVS)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] BIOS-e820: 000000007d553c00 - 000000007d555c00 (ACPI data)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] BIOS-e820: 000000007d555c00 - 000000007e000000 (reserved)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000fed00400 (reserved)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] 1108MB HIGHMEM available.Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] 896MB LOWMEM available.Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] found SMP MP-table at 000fe710Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Entering add_active_range(0, 0, 513279) 0 entries of 256 usedAug 22 07:30:01 Seqlimson kernel: [ 0.000000] Zone PFN ranges:Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] DMA 0 -> 4096Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Normal 4096 -> 229376Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] HighMem 229376 -> 513279Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Movable zone start PFN for each nodeAug 22 07:30:01 Seqlimson kernel: [ 0.000000] early_node_map[1] active PFN rangesAug 22 07:30:01 Seqlimson kernel: [ 0.000000] 0: 0 -> 513279Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] On node 0 totalpages: 513279Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] DMA zone: 32 pages used for memmapAug 22 07:30:01 Seqlimson kernel: [ 0.000000] DMA zone: 0 pages reservedAug 22 07:30:01 Seqlimson kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Normal zone: 1760 pages used for memmapAug 22 07:30:01 Seqlimson kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] HighMem zone: 2217 pages used for memmapAug 22 07:30:01 Seqlimson kernel: [ 0.000000] HighMem zone: 281686 pages, LIFO batch:31Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Movable zone: 0 pages used for memmapAug 22 07:30:01 Seqlimson kernel: [ 0.000000] DMI 2.5 present.Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00FEC00 checksum 0Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: RSDP 000FEC00, 0024 (r2 DELL )Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: XSDT 000FC5BB, 008C (r1 DELL B9K 15 ASL 61)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: FACP 000FC6EB, 00F4 (r3 DELL B9K 15 ASL 61)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: DSDT FFF789A5, 45A0 (r1 DELL dt_ex 1000 INTL 20050624)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: FACS 7D4FF800, 0040Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: SSDT FFF7D064, 00AA (r1 DELL st_ex 1000 INTL 20050624)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: APIC 000FC7DF, 0092 (r1 DELL B9K 15 ASL 61)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: BOOT 000FC871, 0028 (r1 DELL B9K 15 ASL 61)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: ASF! 000FC899, 0096 (r32 DELL B9K 15 ASL 61)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: MCFG 000FC92F, 003E (r1 DELL B9K 15 ASL 61)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: HPET 000FC96D, 0038 (r1 DELL B9K 15 ASL 61)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: TCPA 000FCBC9, 0032 (r1 DELL B9K 15 ASL 61)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: ____ 000FCBFB, 0030 (r1 DELL B9K 15 ASL 61)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: SLIC 000FC9A5, 0176 (r1 DELL B9K 15 ASL 61)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: SSDT 7D4FF840, 0175 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: SSDT 7D4FFC49, 0175 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: SSDT 7D500052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Processor #0 6:15 APIC version 20Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Processor #1 6:15 APIC version 20Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: IRQ0 used by override.Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: IRQ2 used by override.Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: IRQ9 used by override.Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsAug 22 07:30:01 Seqlimson kernel: [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationAug 22 07:30:01 Seqlimson kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7e000000:62000000)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000f0000Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 509270Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Kernel command line: root=UUID=ee155e83-7895-4eb9-9523-ce047ecfe937 ro quiet splashAug 22 07:30:01 Seqlimson kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Enabling fast FPU save and restore... done.Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Initializing CPU#0Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)Aug 22 07:30:01 Seqlimson kernel: [ 0.000000] Detected 2327.552 MHz processor.Aug 22 07:30:01 Seqlimson kernel: [ 27.003432] Console: colour VGA+ 80x25Aug 22 07:30:01 Seqlimson kernel: [ 27.003435] console [tty0] enabledAug 22 07:30:01 Seqlimson kernel: [ 27.003628] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Aug 22 07:30:01 Seqlimson kernel: [ 27.003835] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Aug 22 07:30:01 Seqlimson kernel: [ 27.066689] Memory: 2023552k/2053116k available (2177k kernel code, 28376k reserved, 1006k data, 368k init, 1135612k highmem)Aug 22 07:30:01 Seqlimson kernel: [ 27.066694] virtual kernel memory layout:Aug 22 07:30:01 Seqlimson kernel: [ 27.066695] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)Aug 22 07:30:01 Seqlimson kernel: [ 27.066695] pkmap : 0xff800000 - 0xffc00000 (4096 kB)Aug 22 07:30:01 Seqlimson kernel: [ 27.066696] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)Aug 22 07:30:01 Seqlimson kernel: [ 27.066697] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)Aug 22 07:30:01 Seqlimson kernel: [ 27.066697] .init : 0xc0421000 - 0xc047d000 ( 368 kB)Aug 22 07:30:01 Seqlimson kernel: [ 27.066698] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)Aug 22 07:30:01 Seqlimson kernel: [ 27.066699] .text : 0xc0100000 - 0xc0320474 (2177 kB)Aug 22 07:30:01 Seqlimson kernel: [ 27.066701] Checking if this processor honours the WP bit even in supervisor mode... Ok.Aug 22 07:30:01 Seqlimson kernel: [ 27.066733] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1Aug 22 07:30:01 Seqlimson kernel: [ 27.066840] hpet clockevent registeredAug 22 07:30:01 Seqlimson kernel: [ 27.146670] Calibrating delay using timer specific routine.. 4658.41 BogoMIPS (lpj=9316828)Aug 22 07:30:01 Seqlimson kernel: [ 27.146687] Security Framework initializedAug 22 07:30:01 Seqlimson kernel: [ 27.146692] SELinux: Disabled at boot.Aug 22 07:30:01 Seqlimson kernel: [ 27.146702] AppArmor: AppArmor initializedAug 22 07:30:01 Seqlimson kernel: [ 27.146705] Failure registering capabilities with primary security module.Aug 22 07:30:01 Seqlimson kernel: [ 27.146711] Mount-cache hash table entries: 512Aug 22 07:30:01 Seqlimson kernel: [ 27.146804] Initializing cgroup subsys nsAug 22 07:30:01 Seqlimson kernel: [ 27.146809] Initializing cgroup subsys cpuacctAug 22 07:30:01 Seqlimson kernel: [ 27.146817] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3fd 00000000 00000001 00000000Aug 22 07:30:01 Seqlimson kernel: [ 27.146823] monitor/mwait feature present.Aug 22 07:30:01 Seqlimson kernel: [ 27.146824] using mwait in idle threads.Aug 22 07:30:01 Seqlimson kernel: [ 27.146827] CPU: L1 I cache: 32K, L1 D cache: 32KAug 22 07:30:01 Seqlimson kernel: [ 27.146828] CPU: L2 cache: 4096KAug 22 07:30:01 Seqlimson kernel: [ 27.146830] CPU: Physical Processor ID: 0Aug 22 07:30:01 Seqlimson kernel: [ 27.146831] CPU: Processor Core ID: 0Aug 22 07:30:01 Seqlimson kernel: [ 27.146833] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3fd 00000000 00000001 00000000Aug 22 07:30:01 Seqlimson kernel: [ 27.146839] Compat vDSO mapped to ffffe000.Aug 22 07:30:01 Seqlimson kernel: [ 27.146849] Checking 'hlt' instruction... OK.Aug 22 07:30:01 Seqlimson kernel: [ 27.162971] SMP alternatives: switching to UP codeAug 22 07:30:01 Seqlimson kernel: [ 27.164232] Early unpacking initramfs... doneAug 22 07:30:01 Seqlimson kernel: [ 27.408535] ACPI: Core revision 20070126Aug 22 07:30:01 Seqlimson kernel: [ 27.482553] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.Aug 22 07:30:01 Seqlimson kernel: [ 27.608297] CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0bAug 22 07:30:01 Seqlimson kernel: [ 27.608309] SMP alternatives: switching to SMP codeAug 22 07:30:01 Seqlimson kernel: [ 27.608859] Booting processor 1/1 eip 3000Aug 22 07:30:01 Seqlimson kernel: [ 27.619157] Initializing CPU#1Aug 22 07:30:01 Seqlimson kernel: [ 27.697457] Calibrating delay using timer specific routine.. 4654.97 BogoMIPS (lpj=9309952)Aug 22 07:30:01 Seqlimson kernel: [ 27.697462] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3fd 00000000 00000001 00000000Aug 22 07:30:01 Seqlimson kernel: [ 27.697466] monitor/mwait feature present.Aug 22 07:30:01 Seqlimson kernel: [ 27.697469] CPU: L1 I cache: 32K, L1 D cache: 32KAug 22 07:30:01 Seqlimson kernel: [ 27.697470] CPU: L2 cache: 4096KAug 22 07:30:01 Seqlimson kernel: [ 27.697471] CPU: Physical Processor ID: 0Aug 22 07:30:01 Seqlimson kernel: [ 27.697472] CPU: Processor Core ID: 1Aug 22 07:30:01 Seqlimson kernel: [ 27.697473] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3fd 00000000 00000001 00000000Aug 22 07:30:01 Seqlimson kernel: [ 27.698074] CPU1: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0bAug 22 07:30:01 Seqlimson kernel: [ 27.698090] Total of 2 processors activated (9313.39 BogoMIPS).Aug 22 07:30:01 Seqlimson kernel: [ 27.698229] ENABLING IO-APIC IRQsAug 22 07:30:01 Seqlimson kernel: [ 27.698388] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1Aug 22 07:30:01 Seqlimson kernel: [ 27.845217] checking TSC synchronization [CPU#0 -> CPU#1]: passed.Aug 22 07:30:01 Seqlimson kernel: [ 27.865184] Brought up 2 CPUsAug 22 07:30:01 Seqlimson kernel: [ 27.865203] CPU0 attaching sched-domain:Aug 22 07:30:01 Seqlimson kernel: [ 27.865205] domain 0: span 03Aug 22 07:30:01 Seqlimson kernel: [ 27.865206] groups: 01 02Aug 22 07:30:01 Seqlimson kernel: [ 27.865209] CPU1 attaching sched-domain:Aug 22 07:30:01 Seqlimson kernel: [ 27.865210] domain 0: span 03Aug 22 07:30:01 Seqlimson kernel: [ 27.865211] groups: 02 01Aug 22 07:30:01 Seqlimson kernel: [ 27.865367] net_namespace: 64 bytesAug 22 07:30:01 Seqlimson kernel: [ 27.865374] Booting paravirtualized kernel on bare hardwareAug 22 07:30:01 Seqlimson kernel: [ 27.865696] Time: 7:29:37 Date: 08/22/08Aug 22 07:30:01 Seqlimson kernel: [ 27.865715] NET: Registered protocol family 16Aug 22 07:30:01 Seqlimson kernel: [ 27.865847] EISA bus registeredAug 22 07:30:01 Seqlimson kernel: [ 27.865850] ACPI: bus type pci registeredAug 22 07:30:01 Seqlimson kernel: [ 27.871877] PCI: PCI BIOS revision 2.10 entry at 0xfb05f, last bus=3Aug 22 07:30:01 Seqlimson kernel: [ 27.871879] PCI: Using configuration type 1Aug 22 07:30:01 Seqlimson kernel: [ 27.871890] Setting up standard PCI resourcesAug 22 07:30:01 Seqlimson kernel: [ 27.885122] ACPI: EC: Look up EC in DSDTAug 22 07:30:01 Seqlimson kernel: [ 27.948671] ACPI: BIOS _OSI(Linux) query ignoredAug 22 07:30:01 Seqlimson kernel: [ 27.948673] ACPI: DMI System Vendor: Dell Inc.Aug 22 07:30:01 Seqlimson kernel: [ 27.948674] ACPI: DMI Product Name: OptiPlex 755 Aug 22 07:30:01 Seqlimson kernel: [ 27.948676] ACPI: DMI Product Version: Aug 22 07:30:01 Seqlimson kernel: [ 27.948676] ACPI: DMI Board Name: 0DR845Aug 22 07:30:01 Seqlimson kernel: [ 27.948677] ACPI: DMI BIOS Vendor: Dell Inc.Aug 22 07:30:01 Seqlimson kernel: [ 27.948679] ACPI: DMI BIOS Date: 11/05/2007Aug 22 07:30:01 Seqlimson kernel: [ 27.948680] ACPI: Please send DMI info above to linux-acpi@vger.kernel.orgAug 22 07:30:01 Seqlimson kernel: [ 27.948681] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.orgAug 22 07:30:01 Seqlimson kernel: [ 27.980373] ACPI: Interpreter enabledAug 22 07:30:01 Seqlimson kernel: [ 27.980375] ACPI: (supports S0 S1 S3 S4 S5)Aug 22 07:30:01 Seqlimson kernel: [ 27.980387] ACPI: Using IOAPIC for interrupt routingAug 22 07:30:01 Seqlimson kernel: [ 28.115267] ACPI: PCI Root Bridge [PCI0] (0000:00)Aug 22 07:30:01 Seqlimson kernel: [ 28.116015] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCOAug 22 07:30:01 Seqlimson kernel: [ 28.116018] PCI quirk: region 0880-08bf claimed by ICH6 GPIOAug 22 07:30:01 Seqlimson kernel: [ 28.116285] PCI: Transparent bridge - 0000:00:1e.0Aug 22 07:30:01 Seqlimson kernel: [ 28.116305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]Aug 22 07:30:01 Seqlimson kernel: [ 28.117079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]Aug 22 07:30:01 Seqlimson kernel: [ 28.117676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]Aug 22 07:30:01 Seqlimson kernel: [ 28.118140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]Aug 22 07:30:01 Seqlimson kernel: [ 30.044700] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)Aug 22 07:30:01 Seqlimson kernel: [ 30.045456] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)Aug 22 07:30:01 Seqlimson kernel: [ 30.046191] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)Aug 22 07:30:01 Seqlimson kernel: [ 30.046928] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)Aug 22 07:30:01 Seqlimson kernel: [ 30.047671] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.Aug 22 07:30:01 Seqlimson kernel: [ 30.048409] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)Aug 22 07:30:01 Seqlimson kernel: [ 30.049163] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)Aug 22 07:30:01 Seqlimson kernel: [ 30.049899] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)Aug 22 07:30:01 Seqlimson kernel: [ 30.050341] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 87 [20070126]Aug 22 07:30:01 Seqlimson kernel: [ 30.050354] Linux Plug and Play Support v0.97 (c) Adam BelayAug 22 07:30:01 Seqlimson kernel: [ 30.050376] pnp: PnP ACPI initAug 22 07:30:01 Seqlimson kernel: [ 30.050382] ACPI: bus type pnp registeredAug 22 07:30:01 Seqlimson kernel: [ 30.107480] pnp: PnP ACPI: found 9 devicesAug 22 07:30:01 Seqlimson kernel: [ 30.107482] ACPI: ACPI bus type pnp unregisteredAug 22 07:30:01 Seqlimson kernel: [ 30.107484] PnPBIOS: Disabled by ACPI PNPAug 22 07:30:01 Seqlimson kernel: [ 30.107626] PCI: Using ACPI for IRQ routingAug 22 07:30:01 Seqlimson kernel: [ 30.107628] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportAug 22 07:30:01 Seqlimson kernel: [ 30.107630] PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0Aug 22 07:30:01 Seqlimson kernel: [ 30.107632] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0Aug 22 07:30:01 Seqlimson kernel: [ 30.107636] PCI: Cannot allocate resource region 0 of device 0000:00:02.0Aug 22 07:30:01 Seqlimson kernel: [ 30.107638] PCI: Cannot allocate resource region 3 of device 0000:00:02.0Aug 22 07:30:01 Seqlimson kernel: [ 30.107640] PCI: Cannot allocate resource region 0 of device 0000:00:02.1Aug 22 07:30:01 Seqlimson kernel: [ 30.107644] PCI: Cannot allocate resource region 1 of device 0000:00:03.3Aug 22 07:30:01 Seqlimson kernel: [ 30.107647] PCI: Cannot allocate resource region 0 of device 0000:00:19.0Aug 22 07:30:01 Seqlimson kernel: [ 30.107648] PCI: Cannot allocate resource region 1 of device 0000:00:19.0Aug 22 07:30:01 Seqlimson kernel: [ 30.107653] PCI: Cannot allocate resource region 0 of device 0000:00:1a.7Aug 22 07:30:01 Seqlimson kernel: [ 30.107655] PCI: Cannot allocate resource region 0 of device 0000:00:1b.0Aug 22 07:30:01 Seqlimson kernel: [ 30.107667] PCI: Cannot allocate resource region 0 of device 0000:00:1f.3Aug 22 07:30:01 Seqlimson kernel: [ 30.148144] NET: Registered protocol family 8Aug 22 07:30:01 Seqlimson kernel: [ 30.148146] NET: Registered protocol family 20Aug 22 07:30:01 Seqlimson kernel: [ 30.148170] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0Aug 22 07:30:01 Seqlimson kernel: [ 30.148174] hpet0: 4 64-bit timers, 14318180 HzAug 22 07:30:01 Seqlimson kernel: [ 30.149197] AppArmor: AppArmor Filesystem EnabledAug 22 07:30:01 Seqlimson kernel: [ 30.152141] Time: tsc clocksource has been installed.Aug 22 07:30:01 Seqlimson kernel: [ 30.152147] Switched to high resolution mode on CPU 0Aug 22 07:30:01 Seqlimson kernel: [ 30.152228] Switched to high resolution mode on CPU 1Aug 22 07:30:01 Seqlimson kernel: [ 30.167985] system 00:01: ioport range 0x800-0x85f has been reservedAug 22 07:30:01 Seqlimson kernel: [ 30.167987] system 00:01: ioport range 0xc00-0xc7f has been reservedAug 22 07:30:01 Seqlimson kernel: [ 30.167990] system 00:01: ioport range 0x860-0x8ff could not be reservedAug 22 07:30:01 Seqlimson kernel: [ 30.198248] PCI: Bridge: 0000:00:01.0Aug 22 07:30:01 Seqlimson kernel: [ 30.198250] IO window: disabled.Aug 22 07:30:01 Seqlimson kernel: [ 30.198252] MEM window: disabled.Aug 22 07:30:01 Seqlimson kernel: [ 30.198254] PREFETCH window: disabled.Aug 22 07:30:01 Seqlimson kernel: [ 30.198256] PCI: Bridge: 0000:00:1c.0Aug 22 07:30:01 Seqlimson kernel: [ 30.198257] IO window: disabled.Aug 22 07:30:01 Seqlimson kernel: [ 30.198260] MEM window: disabled.Aug 22 07:30:01 Seqlimson kernel: [ 30.198262] PREFETCH window: disabled.Aug 22 07:30:01 Seqlimson kernel: [ 30.198266] PCI: Bridge: 0000:00:1e.0Aug 22 07:30:01 Seqlimson kernel: [ 30.198267] IO window: disabled.Aug 22 07:30:01 Seqlimson kernel: [ 30.198270] MEM window: disabled.Aug 22 07:30:01 Seqlimson kernel: [ 30.198272] PREFETCH window: disabled.Aug 22 07:30:01 Seqlimson kernel: [ 30.198283] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 22 07:30:01 Seqlimson kernel: [ 30.198287] PCI: Setting latency timer of device 0000:00:01.0 to 64Aug 22 07:30:01 Seqlimson kernel: [ 30.198300] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 22 07:30:01 Seqlimson kernel: [ 30.198303] PCI: Setting latency timer of device 0000:00:1c.0 to 64Aug 22 07:30:01 Seqlimson kernel: [ 30.198311] PCI: Setting latency timer of device 0000:00:1e.0 to 64Aug 22 07:30:01 Seqlimson kernel: [ 30.198318] NET: Registered protocol family 2Aug 22 07:30:01 Seqlimson kernel: [ 30.235854] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)Aug 22 07:30:01 Seqlimson kernel: [ 30.236022] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)Aug 22 07:30:01 Seqlimson kernel: [ 30.236327] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)Aug 22 07:30:01 Seqlimson kernel: [ 30.236465] TCP: Hash tables configured (established 131072 bind 65536)Aug 22 07:30:01 Seqlimson kernel: [ 30.236467] TCP reno registeredAug 22 07:30:01 Seqlimson kernel: [ 30.247882] checking if image is initramfs... it isAug 22 07:30:01 Seqlimson kernel: [ 30.727410] Freeing initrd memory: 7312k freedAug 22 07:30:01 Seqlimson kernel: [ 30.727516] Simple Boot Flag at 0x7a set to 0x1Aug 22 07:30:01 Seqlimson kernel: [ 30.727950] audit: initializing netlink socket (disabled)Aug 22 07:30:01 Seqlimson kernel: [ 30.727961] audit(1219390179.545:1): initializedAug 22 07:30:01 Seqlimson kernel: [ 30.728109] highmem bounce pool size: 64 pagesAug 22 07:30:01 Seqlimson kernel: [ 30.729429] VFS: Disk quotas dquot_6.5.1Aug 22 07:30:01 Seqlimson kernel: [ 30.729482] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Aug 22 07:30:01 Seqlimson kernel: [ 30.729579] io scheduler noop registeredAug 22 07:30:01 Seqlimson kernel: [ 30.729581] io scheduler anticipatory registeredAug 22 07:30:01 Seqlimson kernel: [ 30.729582] io scheduler deadline registeredAug 22 07:30:01 Seqlimson kernel: [ 30.729589] io scheduler cfq registered (default)Aug 22 07:30:01 Seqlimson kernel: [ 30.729599] Boot video device is 0000:00:02.0Aug 22 07:30:01 Seqlimson kernel: [ 30.729755] PCI: Setting latency timer of device 0000:00:01.0 to 64Aug 22 07:30:01 Seqlimson kernel: [ 30.729781] assign_interrupt_mode Found MSI capabilityAug 22 07:30:01 Seqlimson kernel: [ 30.729801] Allocate Port Service[0000:00:01.0:pcie00]Aug 22 07:30:01 Seqlimson kernel: [ 30.729855] PCI: Setting latency timer of device 0000:00:1c.0 to 64Aug 22 07:30:01 Seqlimson kernel: [ 30.729886] assign_interrupt_mode Found MSI capabilityAug 22 07:30:01 Seqlimson kernel: [ 30.729912] Allocate Port Service[0000:00:1c.0:pcie00]Aug 22 07:30:01 Seqlimson kernel: [ 30.729933] Allocate Port Service[0000:00:1c.0:pcie02]Aug 22 07:30:01 Seqlimson kernel: [ 30.730095] isapnp: Scanning for PnP cards...Aug 22 07:30:01 Seqlimson kernel: [ 31.082336] isapnp: No Plug & Play device foundAug 22 07:30:01 Seqlimson kernel: [ 31.099133] Real Time Clock Driver v1.12acAug 22 07:30:01 Seqlimson kernel: [ 31.099393] hpet_resources: 0xfed00000 is busyAug 22 07:30:01 Seqlimson kernel: [ 31.099405] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledAug 22 07:30:01 Seqlimson kernel: [ 31.099507] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AAug 22 07:30:01 Seqlimson kernel: [ 31.099939] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AAug 22 07:30:01 Seqlimson kernel: [ 31.100026] ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17Aug 22 07:30:01 Seqlimson kernel: [ 31.100095] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550AAug 22 07:30:01 Seqlimson kernel: [ 31.100553] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeAug 22 07:30:01 Seqlimson kernel: [ 31.100600] input: Macintosh mouse button emulation as /devices/virtual/input/input0Aug 22 07:30:01 Seqlimson kernel: [ 31.100691] PNP: No PS/2 controller found. Probing ports directly.Aug 22 07:30:01 Seqlimson kernel: [ 31.103125] serio: i8042 KBD port at 0x60,0x64 irq 1Aug 22 07:30:01 Seqlimson kernel: [ 31.103128] serio: i8042 AUX port at 0x60,0x64 irq 12Aug 22 07:30:01 Seqlimson kernel: [ 31.130905] mice: PS/2 mouse device common for all miceAug 22 07:30:01 Seqlimson kernel: [ 31.130993] EISA: Probing bus 0 at eisa.0Aug 22 07:30:01 Seqlimson kernel: [ 31.131018] EISA: Detected 0 cards.Aug 22 07:30:01 Seqlimson kernel: [ 31.131020] cpuidle: using governor ladderAug 22 07:30:01 Seqlimson kernel: [ 31.131022] cpuidle: using governor menuAug 22 07:30:01 Seqlimson kernel: [ 31.131084] NET: Registered protocol family 1Aug 22 07:30:01 Seqlimson kernel: [ 31.131106] Using IPI No-Shortcut modeAug 22 07:30:01 Seqlimson kernel: [ 31.131125] registered taskstats version 1Aug 22 07:30:01 Seqlimson kernel: [ 31.131210] Magic number: 4:332:471Aug 22 07:30:01 Seqlimson kernel: [ 31.131241] BIOS EDD facility v0.16 2004-Jun-25, 0 devices foundAug 22 07:30:01 Seqlimson kernel: [ 31.131242] EDD information not available.Aug 22 07:30:01 Seqlimson kernel: [ 31.131359] Freeing unused kernel memory: 368k freedAug 22 07:30:01 Seqlimson kernel: [ 32.279647] fuse init (API version 7.9)Aug 22 07:30:01 Seqlimson kernel: [ 32.293196] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]Aug 22 07:30:01 Seqlimson kernel: [ 32.293203] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]Aug 22 07:30:01 Seqlimson kernel: [ 32.486685] SCSI subsystem initializedAug 22 07:30:01 Seqlimson kernel: [ 32.511598] libata version 3.00 loaded.Aug 22 07:30:01 Seqlimson kernel: [ 32.513580] usbcore: registered new interface driver usbfsAug 22 07:30:01 Seqlimson kernel: [ 32.513595] usbcore: registered new interface driver hubAug 22 07:30:01 Seqlimson kernel: [ 32.514006] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 18 (level, low) -> IRQ 18Aug 22 07:30:01 Seqlimson kernel: [ 32.514028] PCI: Setting latency timer of device 0000:00:03.2 to 64Aug 22 07:30:01 Seqlimson kernel: [ 32.514036] ACPI: PCI interrupt for device 0000:00:03.2 disabledAug 22 07:30:01 Seqlimson kernel: [ 32.514058] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 18 (level, low) -> IRQ 18Aug 22 07:30:01 Seqlimson kernel: [ 32.514072] PCI: Setting latency timer of device 0000:00:1f.2 to 64Aug 22 07:30:01 Seqlimson kernel: [ 32.514079] ACPI: PCI interrupt for device 0000:00:1f.2 disabledAug 22 07:30:01 Seqlimson kernel: [ 32.514091] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 18Aug 22 07:30:01 Seqlimson kernel: [ 32.514105] PCI: Setting latency timer of device 0000:00:1f.5 to 64Aug 22 07:30:01 Seqlimson kernel: [ 32.514111] ACPI: PCI interrupt for device 0000:00:1f.5 disabledAug 22 07:30:01 Seqlimson kernel: [ 32.516427] usbcore: registered new device driver usbAug 22 07:30:01 Seqlimson kernel: [ 32.525163] USB Universal Host Controller Interface driver v3.0Aug 22 07:30:01 Seqlimson kernel: [ 32.525196] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 22 07:30:01 Seqlimson kernel: [ 32.525203] PCI: Setting latency timer of device 0000:00:1a.0 to 64Aug 22 07:30:01 Seqlimson kernel: [ 32.525206] uhci_hcd 0000:00:1a.0: UHCI Host ControllerAug 22 07:30:01 Seqlimson kernel: [ 32.525372] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1Aug 22 07:30:01 Seqlimson kernel: [ 32.525394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20Aug 22 07:30:01 Seqlimson kernel: [ 32.525487] usb usb1: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 32.525503] hub 1-0:1.0: USB hub foundAug 22 07:30:01 Seqlimson kernel: [ 32.525506] hub 1-0:1.0: 2 ports detectedAug 22 07:30:01 Seqlimson kernel: [ 32.627605] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17Aug 22 07:30:01 Seqlimson kernel: [ 32.627613] PCI: Setting latency timer of device 0000:00:1a.1 to 64Aug 22 07:30:01 Seqlimson kernel: [ 32.627616] uhci_hcd 0000:00:1a.1: UHCI Host ControllerAug 22 07:30:01 Seqlimson kernel: [ 32.627632] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2Aug 22 07:30:01 Seqlimson kernel: [ 32.627656] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00Aug 22 07:30:01 Seqlimson kernel: [ 32.627732] usb usb2: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 32.627748] hub 2-0:1.0: USB hub foundAug 22 07:30:01 Seqlimson kernel: [ 32.627752] hub 2-0:1.0: 2 ports detectedAug 22 07:30:01 Seqlimson kernel: [ 32.731359] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19Aug 22 07:30:01 Seqlimson kernel: [ 32.731367] PCI: Setting latency timer of device 0000:00:1d.0 to 64Aug 22 07:30:01 Seqlimson kernel: [ 32.731369] uhci_hcd 0000:00:1d.0: UHCI Host ControllerAug 22 07:30:01 Seqlimson kernel: [ 32.731385] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3Aug 22 07:30:01 Seqlimson kernel: [ 32.731406] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ff80Aug 22 07:30:01 Seqlimson kernel: [ 32.731483] usb usb3: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 32.731501] hub 3-0:1.0: USB hub foundAug 22 07:30:01 Seqlimson kernel: [ 32.731504] hub 3-0:1.0: 2 ports detectedAug 22 07:30:01 Seqlimson kernel: [ 32.834130] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17Aug 22 07:30:01 Seqlimson kernel: [ 32.834138] PCI: Setting latency timer of device 0000:00:1d.1 to 64Aug 22 07:30:01 Seqlimson kernel: [ 32.834141] uhci_hcd 0000:00:1d.1: UHCI Host ControllerAug 22 07:30:01 Seqlimson kernel: [ 32.834156] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4Aug 22 07:30:01 Seqlimson kernel: [ 32.834175] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60Aug 22 07:30:01 Seqlimson kernel: [ 32.834249] usb usb4: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 32.834264] hub 4-0:1.0: USB hub foundAug 22 07:30:01 Seqlimson kernel: [ 32.834267] hub 4-0:1.0: 2 ports detectedAug 22 07:30:01 Seqlimson kernel: [ 32.937916] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18Aug 22 07:30:01 Seqlimson kernel: [ 32.937924] PCI: Setting latency timer of device 0000:00:1d.2 to 64Aug 22 07:30:01 Seqlimson kernel: [ 32.937927] uhci_hcd 0000:00:1d.2: UHCI Host ControllerAug 22 07:30:01 Seqlimson kernel: [ 32.937944] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5Aug 22 07:30:01 Seqlimson kernel: [ 32.937966] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40Aug 22 07:30:01 Seqlimson kernel: [ 32.938052] usb usb5: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 32.938067] hub 5-0:1.0: USB hub foundAug 22 07:30:01 Seqlimson kernel: [ 32.938070] hub 5-0:1.0: 2 ports detectedAug 22 07:30:01 Seqlimson kernel: [ 33.041706] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 20Aug 22 07:30:01 Seqlimson kernel: [ 33.041715] PCI: Setting latency timer of device 0000:00:1a.7 to 64Aug 22 07:30:01 Seqlimson kernel: [ 33.041718] ehci_hcd 0000:00:1a.7: EHCI Host ControllerAug 22 07:30:01 Seqlimson kernel: [ 33.041738] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6Aug 22 07:30:01 Seqlimson kernel: [ 33.045620] ehci_hcd 0000:00:1a.7: debug port 1Aug 22 07:30:01 Seqlimson kernel: [ 33.045625] PCI: cache line size of 32 is not supported by device 0000:00:1a.7Aug 22 07:30:01 Seqlimson kernel: [ 33.045630] ehci_hcd 0000:00:1a.7: irq 20, io mem 0x80226000Aug 22 07:30:01 Seqlimson kernel: [ 33.058569] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Aug 22 07:30:01 Seqlimson kernel: [ 33.058638] usb usb6: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 33.058654] hub 6-0:1.0: USB hub foundAug 22 07:30:01 Seqlimson kernel: [ 33.058658] hub 6-0:1.0: 6 ports detectedAug 22 07:30:01 Seqlimson kernel: [ 33.161451] ata_piix 0000:00:1f.2: version 2.12Aug 22 07:30:01 Seqlimson kernel: [ 33.161457] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]Aug 22 07:30:01 Seqlimson kernel: [ 33.178321] usb 4-1: new full speed USB device using uhci_hcd and address 2Aug 22 07:30:01 Seqlimson kernel: [ 33.317013] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 18 (level, low) -> IRQ 18Aug 22 07:30:01 Seqlimson kernel: [ 33.317038] PCI: Setting latency timer of device 0000:00:1f.2 to 64Aug 22 07:30:01 Seqlimson kernel: [ 33.317087] scsi0 : ata_piixAug 22 07:30:01 Seqlimson kernel: [ 33.317199] scsi1 : ata_piixAug 22 07:30:01 Seqlimson kernel: [ 33.321878] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfec0 irq 14Aug 22 07:30:01 Seqlimson kernel: [ 33.321880] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfec8 irq 15Aug 22 07:30:01 Seqlimson kernel: [ 33.351131] usb 4-1: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 33.357073] hub 4-1:1.0: USB hub foundAug 22 07:30:01 Seqlimson kernel: [ 33.358056] hub 4-1:1.0: 3 ports detectedAug 22 07:30:01 Seqlimson kernel: [ 33.517619] ata1.00: ATA-7: ST3160815AS, 3.ADA, max UDMA/133Aug 22 07:30:01 Seqlimson kernel: [ 33.517623] ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)Aug 22 07:30:01 Seqlimson kernel: [ 33.584119] ata1.00: configured for UDMA/133Aug 22 07:30:01 Seqlimson kernel: [ 33.704146] usb 4-2: new low speed USB device using uhci_hcd and address 3Aug 22 07:30:01 Seqlimson kernel: [ 33.874985] usb 4-2: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 34.071506] ata2.00: ATAPI: PBDS DVD+/-RW DH-16W1S, 2D14, max UDMA/100Aug 22 07:30:01 Seqlimson kernel: [ 34.080476] usb 4-1.1: new low speed USB device using uhci_hcd and address 4Aug 22 07:30:01 Seqlimson kernel: [ 34.220232] usb 4-1.1: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 34.255103] usbcore: registered new interface driver hiddevAug 22 07:30:01 Seqlimson kernel: [ 34.260137] ata2.00: configured for UDMA/100Aug 22 07:30:01 Seqlimson kernel: [ 34.260225] scsi 0:0:0:0: Direct-Access ATA ST3160815AS 3.AD PQ: 0 ANSI: 5Aug 22 07:30:01 Seqlimson kernel: [ 34.261170] scsi 1:0:0:0: CD-ROM PBDS DVD+-RW DH-16W1S 2D14 PQ: 0 ANSI: 5Aug 22 07:30:01 Seqlimson kernel: [ 34.261219] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]Aug 22 07:30:01 Seqlimson kernel: [ 34.272217] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/input/input1Aug 22 07:30:01 Seqlimson kernel: [ 34.290885] input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.1-2Aug 22 07:30:01 Seqlimson kernel: [ 34.305164] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input2Aug 22 07:30:01 Seqlimson kernel: [ 34.323801] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-1.1Aug 22 07:30:01 Seqlimson kernel: [ 34.357916] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1.1/4-1.1:1.1/input/input3Aug 22 07:30:01 Seqlimson kernel: [ 34.366702] input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-1.1Aug 22 07:30:01 Seqlimson kernel: [ 34.366712] usbcore: registered new interface driver usbhidAug 22 07:30:01 Seqlimson kernel: [ 34.366715] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driverAug 22 07:30:01 Seqlimson kernel: [ 34.414593] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 18Aug 22 07:30:01 Seqlimson kernel: [ 34.414617] PCI: Setting latency timer of device 0000:00:1f.5 to 64Aug 22 07:30:01 Seqlimson kernel: [ 34.414646] scsi2 : ata_piixAug 22 07:30:01 Seqlimson kernel: [ 34.414767] scsi3 : ata_piixAug 22 07:30:01 Seqlimson kernel: [ 34.414786] ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 18Aug 22 07:30:01 Seqlimson kernel: [ 34.414788] ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 18Aug 22 07:30:01 Seqlimson kernel: [ 35.404438] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19Aug 22 07:30:01 Seqlimson kernel: [ 35.404447] PCI: Setting latency timer of device 0000:00:1d.7 to 64Aug 22 07:30:01 Seqlimson kernel: [ 35.404450] ehci_hcd 0000:00:1d.7: EHCI Host ControllerAug 22 07:30:01 Seqlimson kernel: [ 35.404472] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7Aug 22 07:30:01 Seqlimson kernel: [ 35.408366] ehci_hcd 0000:00:1d.7: debug port 1Aug 22 07:30:01 Seqlimson kernel: [ 35.408370] PCI: cache line size of 32 is not supported by device 0000:00:1d.7Aug 22 07:30:01 Seqlimson kernel: [ 35.408374] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xff980800Aug 22 07:30:01 Seqlimson kernel: [ 35.413650] Driver 'sd' needs updating - please use bus_type methodsAug 22 07:30:01 Seqlimson kernel: [ 35.413699] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)Aug 22 07:30:01 Seqlimson kernel: [ 35.413707] sd 0:0:0:0: [sda] Write Protect is offAug 22 07:30:01 Seqlimson kernel: [ 35.413709] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00Aug 22 07:30:01 Seqlimson kernel: [ 35.413720] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAAug 22 07:30:01 Seqlimson kernel: [ 35.413751] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)Aug 22 07:30:01 Seqlimson kernel: [ 35.413758] sd 0:0:0:0: [sda] Write Protect is offAug 22 07:30:01 Seqlimson kernel: [ 35.413760] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00Aug 22 07:30:01 Seqlimson kernel: [ 35.413771] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAAug 22 07:30:01 Seqlimson kernel: [ 35.413773] sda:<4>Driver 'sr' needs updating - please use bus_type methodsAug 22 07:30:01 Seqlimson kernel: [ 35.420351] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Aug 22 07:30:01 Seqlimson kernel: [ 35.420432] usb usb7: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 35.420458] hub 7-0:1.0: USB hub foundAug 22 07:30:01 Seqlimson kernel: [ 35.420463] hub 7-0:1.0: 6 ports detectedAug 22 07:30:01 Seqlimson kernel: [ 35.435557] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4Aug 22 07:30:01 Seqlimson kernel: [ 35.483283] sd 0:0:0:0: [sda] Attached SCSI diskAug 22 07:30:01 Seqlimson kernel: [ 35.489915] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda trayAug 22 07:30:01 Seqlimson kernel: [ 35.489917] Uniform CD-ROM driver Revision: 3.20Aug 22 07:30:01 Seqlimson kernel: [ 35.489950] sr 1:0:0:0: Attached scsi CD-ROM sr0Aug 22 07:30:01 Seqlimson kernel: [ 35.493322] sd 0:0:0:0: Attached scsi generic sg0 type 0Aug 22 07:30:01 Seqlimson kernel: [ 35.493335] sr 1:0:0:0: Attached scsi generic sg1 type 5Aug 22 07:30:01 Seqlimson kernel: [ 35.508159] usb 4-1: USB disconnect, address 2Aug 22 07:30:01 Seqlimson kernel: [ 35.508161] usb 4-1.1: USB disconnect, address 4Aug 22 07:30:01 Seqlimson kernel: [ 35.679792] usb 4-2: USB disconnect, address 3Aug 22 07:30:01 Seqlimson kernel: [ 35.864436] Attempting manual resumeAug 22 07:30:01 Seqlimson kernel: [ 35.864438] swsusp: Resume From Partition 8:8Aug 22 07:30:01 Seqlimson kernel: [ 35.864439] PM: Checking swsusp image.Aug 22 07:30:01 Seqlimson kernel: [ 35.864777] PM: Resume from disk failed.Aug 22 07:30:01 Seqlimson kernel: [ 35.895327] kjournald starting. Commit interval 5 secondsAug 22 07:30:01 Seqlimson kernel: [ 35.895331] EXT3-fs: mounted filesystem with ordered data mode.Aug 22 07:30:01 Seqlimson kernel: [ 36.490976] usb 4-1: new full speed USB device using uhci_hcd and address 5Aug 22 07:30:01 Seqlimson kernel: [ 36.663901] usb 4-1: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 36.669831] hub 4-1:1.0: USB hub foundAug 22 07:30:01 Seqlimson kernel: [ 36.670814] hub 4-1:1.0: 3 ports detectedAug 22 07:30:01 Seqlimson kernel: [ 37.017817] usb 4-2: new low speed USB device using uhci_hcd and address 6Aug 22 07:30:01 Seqlimson kernel: [ 37.188743] usb 4-2: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 37.208811] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/input/input4Aug 22 07:30:01 Seqlimson kernel: [ 37.229374] input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.1-2Aug 22 07:30:01 Seqlimson kernel: [ 37.441129] usb 4-1.1: new low speed USB device using uhci_hcd and address 7Aug 22 07:30:01 Seqlimson kernel: [ 37.582878] usb 4-1.1: configuration #1 chosen from 1 choiceAug 22 07:30:01 Seqlimson kernel: [ 37.608930] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input5Aug 22 07:30:01 Seqlimson kernel: [ 37.640453] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-1.1Aug 22 07:30:01 Seqlimson kernel: [ 37.682645] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1.1/4-1.1:1.1/input/input6Aug 22 07:30:01 Seqlimson kernel: [ 37.712291] input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-1.1Aug 22 07:30:01 Seqlimson kernel: [ 46.761689] input: PC Speaker as /devices/platform/pcspkr/input/input7Aug 22 07:30:01 Seqlimson kernel: [ 47.132659] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0Aug 22 07:30:01 Seqlimson kernel: [ 47.132662] e1000e: Copyright (c) 1999-2007 Intel Corporation.Aug 22 07:30:01 Seqlimson kernel: [ 47.132704] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 21 (level, low) -> IRQ 21Aug 22 07:30:01 Seqlimson kernel: [ 47.132713] PCI: Setting latency timer of device 0000:00:19.0 to 64Aug 22 07:30:01 Seqlimson kernel: [ 47.255335] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:a0:e1:3e:a1Aug 22 07:30:01 Seqlimson kernel: [ 47.255338] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network ConnectionAug 22 07:30:01 Seqlimson kernel: [ 47.255359] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: 1041ff-0ffAug 22 07:30:01 Seqlimson kernel: [ 47.360249] parport_pc 00:06: reported by Plug and Play ACPIAug 22 07:30:01 Seqlimson kernel: [ 47.360299] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]Aug 22 07:30:01 Seqlimson kernel: [ 47.388819] heci: Intel(R) AMT Management Interface - version 3.1.0.31Aug 22 07:30:01 Seqlimson kernel: [ 47.388821] heci: Copyright (c) 2003 - 2007 Intel Corporation.Aug 22 07:30:01 Seqlimson kernel: [ 47.388850] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 22 07:30:01 Seqlimson kernel: [ 47.388854] PCI: Setting latency timer of device 0000:00:03.0 to 64Aug 22 07:30:01 Seqlimson kernel: [ 47.390276] heci: link layer has been established.Aug 22 07:30:01 Seqlimson kernel: [ 47.408535] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)Aug 22 07:30:01 Seqlimson kernel: [ 47.419917] pci_hotplug: PCI Hot Plug PCI Core version: 0.5Aug 22 07:30:01 Seqlimson kernel: [ 47.464876] Linux agpgart interface v0.102Aug 22 07:30:01 Seqlimson kernel: [ 47.484666] input: Power Button (FF) as /devices/virtual/input/input8Aug 22 07:30:01 Seqlimson kernel: [ 47.497985] heci: heci driver initialization successful.Aug 22 07:30:01 Seqlimson kernel: [ 47.498070] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4Aug 22 07:30:01 Seqlimson kernel: [ 47.540482] ACPI: Power Button (FF) [PWRF]Aug 22 07:30:01 Seqlimson kernel: [ 47.540523] input: Power Button (CM) as /devices/virtual/input/input9Aug 22 07:30:01 Seqlimson kernel: [ 47.588436] agpgart: Detected an Intel Q35 Chipset.Aug 22 07:30:01 Seqlimson kernel: [ 47.589905] agpgart: Detected 7164K stolen memory.Aug 22 07:30:01 Seqlimson kernel: [ 47.601862] agpgart: AGP aperture is 256M @ 0xd0000000Aug 22 07:30:01 Seqlimson kernel: [ 47.608337] ACPI: Power Button (CM) [VBTN]Aug 22 07:30:01 Seqlimson kernel: [ 48.362276] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 22 07:30:01 Seqlimson kernel: [ 48.362289] PCI: Setting latency timer of device 0000:00:1b.0 to 64Aug 22 07:30:01 Seqlimson kernel: [ 48.871945] loop: module loadedAug 22 07:30:01 Seqlimson kernel: [ 48.877940] lp0: using parport0 (interrupt-driven).Aug 22 07:30:01 Seqlimson kernel: [ 48.943367] Adding 1951856k swap on /dev/sda8. Priority:-1 extents:1 across:1951856kAug 22 07:30:01 Seqlimson kernel: [ 49.478676] EXT3 FS on sda7, internal journalAug 22 07:30:01 Seqlimson kernel: [ 50.148189] kjournald starting. Commit interval 5 secondsAug 22 07:30:01 Seqlimson kernel: [ 50.148304] EXT3 FS on sda6, internal journalAug 22 07:30:01 Seqlimson kernel: [ 50.148308] EXT3-fs: mounted filesystem with ordered data mode.Aug 22 07:30:01 Seqlimson kernel: [ 51.208383] ip_tables: (C) 2000-2006 Netfilter Core TeamAug 22 07:30:01 Seqlimson kernel: [ 51.616198] No dock devices found.Aug 22 07:30:01 Seqlimson kernel: [ 51.622943] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: found ejectable bayAug 22 07:30:01 Seqlimson kernel: [ 51.622946] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: Adding notify handlerAug 22 07:30:01 Seqlimson kernel: [ 51.622967] ACPI: Error installing bay notify handlerAug 22 07:30:01 Seqlimson kernel: [ 51.622969] ACPI: Bay [\_SB_.PCI0.IDE1.PRI1.MAS1] AddedAug 22 07:30:01 Seqlimson kernel: [ 52.704663] NET: Registered protocol family 10Aug 22 07:30:01 Seqlimson kernel: [ 52.704824] lo: Disabled Privacy ExtensionsAug 22 07:30:02 Seqlimson kernel: [ 52.864409] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)Aug 22 07:30:02 Seqlimson kernel: [ 52.864413] apm: disabled - APM is not SMP safe.Aug 22 07:30:02 Seqlimson kernel: [ 52.971880] ppdev: user-space parallel port driverAug 22 07:30:02 Seqlimson kernel: [ 53.169179] audit(1219370402.365:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5005 profile="/usr/sbin/cupsd" namespace="default"Aug 22 07:30:04 Seqlimson kernel: [ 55.025605] ADDRCONF(NETDEV_UP): eth0: link is not readyAug 22 07:30:04 Seqlimson kernel: [ 55.040386] Bluetooth: Core ver 2.11Aug 22 07:30:04 Seqlimson kernel: [ 55.069388] NET: Registered protocol family 31Aug 22 07:30:04 Seqlimson kernel: [ 55.069391] Bluetooth: HCI device and connection manager initializedAug 22 07:30:04 Seqlimson kernel: [ 55.069394] Bluetooth: HCI socket layer initializedAug 22 07:30:04 Seqlimson kernel: [ 55.107732] Bluetooth: L2CAP ver 2.9Aug 22 07:30:04 Seqlimson kernel: [ 55.107736] Bluetooth: L2CAP socket layer initializedAug 22 07:30:04 Seqlimson kernel: [ 55.146161] Bluetooth: RFCOMM socket layer initializedAug 22 07:30:04 Seqlimson kernel: [ 55.146170] Bluetooth: RFCOMM TTY layer initializedAug 22 07:30:04 Seqlimson kernel: [ 55.146171] Bluetooth: RFCOMM ver 1.8Aug 22 07:30:06 Seqlimson kernel: [ 57.665508] [drm] Initialized drm 1.1.0 20060810Aug 22 07:30:06 Seqlimson kernel: [ 57.667107] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 22 07:30:06 Seqlimson kernel: [ 57.667113] PCI: Setting latency timer of device 0000:00:02.0 to 64Aug 22 07:30:06 Seqlimson kernel: [ 57.667150] [drm] Initialized i915 1.6.0 20060119 on minor 0Aug 22 07:30:06 Seqlimson kernel: [ 57.680015] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combiningAug 22 07:30:07 Seqlimson kernel: [ 57.969783] 0000:00:19.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RXAug 22 07:30:07 Seqlimson kernel: [ 57.971400] ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyAug 22 07:30:07 Seqlimson kernel: [ 58.029453] set status page addr 0x00033000Aug 22 07:30:09 Seqlimson kernel: [ 60.134815] NET: Registered protocol family 17Aug 22 07:30:18 Seqlimson kernel: [ 68.917107] eth0: no IPv6 routers presentAug 22 07:30:58 Seqlimson kernel: [ 110.133821] eth0: no IPv6 routers presentAug 25 13:25:13 Seqlimson kernel: [279945.149046] usb 6-4: new high speed USB device using ehci_hcd and address 2Aug 25 13:25:13 Seqlimson kernel: [279945.283290] usb 6-4: configuration #1 chosen from 1 choiceAug 25 13:25:13 Seqlimson kernel: [279945.368212] usbcore: registered new interface driver libusualAug 25 13:25:13 Seqlimson kernel: [279945.389717] Initializing USB Mass Storage driver...Aug 25 13:25:13 Seqlimson kernel: [279945.390525] scsi4 : SCSI emulation for USB Mass Storage devicesAug 25 13:25:13 Seqlimson kernel: [279945.391144] usbcore: registered new interface driver usb-storageAug 25 13:25:13 Seqlimson kernel: [279945.391147] USB Mass Storage support registered.Aug 25 13:25:13 Seqlimson kernel: [279945.391214] usb-storage: device found at 2Aug 25 13:25:13 Seqlimson kernel: [279945.391216] usb-storage: waiting for device to settle before scanningAug 25 13:25:18 Seqlimson kernel: [279950.377579] usb-storage: device scan completeAug 25 13:25:18 Seqlimson kernel: [279950.379203] scsi 4:0:0:0: Direct-Access JetFlash TS1GJF150 8.07 PQ: 0 ANSI: 2Aug 25 13:25:18 Seqlimson kernel: [279950.383919] sd 4:0:0:0: [sdb] 2047998 512-byte hardware sectors (1049 MB)Aug 25 13:25:18 Seqlimson kernel: [279950.384544] sd 4:0:0:0: [sdb] Write Protect is offAug 25 13:25:18 Seqlimson kernel: [279950.384547] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00Aug 25 13:25:18 Seqlimson kernel: [279950.384549] sd 4:0:0:0: [sdb] Assuming drive cache: write throughAug 25 13:25:18 Seqlimson kernel: [279950.387164] sd 4:0:0:0: [sdb] 2047998 512-byte hardware sectors (1049 MB)Aug 25 13:25:18 Seqlimson kernel: [279950.388039] sd 4:0:0:0: [sdb] Write Protect is offAug 25 13:25:18 Seqlimson kernel: [279950.388042] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00Aug 25 13:25:18 Seqlimson kernel: [279950.388044] sd 4:0:0:0: [sdb] Assuming drive cache: write throughAug 25 13:25:18 Seqlimson kernel: [279950.388047] sdb: sdb1Aug 25 13:25:18 Seqlimson kernel: [279950.388966] sd 4:0:0:0: [sdb] Attached SCSI removable diskAug 25 13:25:18 Seqlimson kernel: [279950.389000] sd 4:0:0:0: Attached scsi generic sg2 type 0Aug 25 13:26:29 Seqlimson kernel: [280021.362892] usb 6-4: USB disconnect, address 2Aug 25 13:28:17 Seqlimson kernel: [280129.090322] usb 6-4: new high speed USB device using ehci_hcd and address 3Aug 25 13:28:17 Seqlimson kernel: [280129.223849] usb 6-4: configuration #1 chosen from 1 choiceAug 25 13:28:17 Seqlimson kernel: [280129.224063] scsi5 : SCSI emulation for USB Mass Storage devicesAug 25 13:28:17 Seqlimson kernel: [280129.224251] usb-storage: device found at 3Aug 25 13:28:17 Seqlimson kernel: [280129.224254] usb-storage: waiting for device to settle before scanningAug 25 13:28:22 Seqlimson kernel: [280134.210374] usb-storage: device scan completeAug 25 13:28:22 Seqlimson kernel: [280134.211747] scsi 5:0:0:0: Direct-Access JetFlash TS1GJF150 8.07 PQ: 0 ANSI: 2Aug 25 13:28:22 Seqlimson kernel: [280134.214721] sd 5:0:0:0: [sdb] 2047998 512-byte hardware sectors (1049 MB)Aug 25 13:28:22 Seqlimson kernel: [280134.215469] sd 5:0:0:0: [sdb] Write Protect is offAug 25 13:28:22 Seqlimson kernel: [280134.215473] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00Aug 25 13:28:22 Seqlimson kernel: [280134.215474] sd 5:0:0:0: [sdb] Assuming drive cache: write throughAug 25 13:28:22 Seqlimson kernel: [280134.218212] sd 5:0:0:0: [sdb] 2047998 512-byte hardware sectors (1049 MB)Aug 25 13:28:22 Seqlimson kernel: [280134.218836] sd 5:0:0:0: [sdb] Write Protect is offAug 25 13:28:22 Seqlimson kernel: [280134.218839] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00Aug 25 13:28:22 Seqlimson kernel: [280134.218840] sd 5:0:0:0: [sdb] Assuming drive cache: write throughAug 25 13:28:22 Seqlimson kernel: [280134.218843] sdb: sdb1Aug 25 13:28:22 Seqlimson kernel: [280134.219768] sd 5:0:0:0: [sdb] Attached SCSI removable diskAug 25 13:28:22 Seqlimson kernel: [280134.219803] sd 5:0:0:0: Attached scsi generic sg2 type 0Aug 25 13:28:29 Seqlimson kernel: [280141.182507] usb 6-4: USB disconnect, address 3Aug 25 13:28:29 Seqlimson kernel: [280141.182769] Buffer I/O error on device sdb1, logical block 501Aug 25 13:28:29 Seqlimson kernel: [280141.182773] lost page write due to I/O error on sdb1Aug 25 18:20:22 Seqlimson kernel: [297615.515064] usb 2-2: new full speed USB device using uhci_hcd and address 2Aug 25 18:20:22 Seqlimson kernel: [297615.686808] usb 2-2: configuration #1 chosen from 1 choiceAug 25 18:20:22 Seqlimson kernel: [297615.706647] scsi6 : SCSI emulation for USB Mass Storage devicesAug 25 18:20:22 Seqlimson kernel: [297615.706950] usb-storage: device found at 2Aug 25 18:20:22 Seqlimson kernel: [297615.706952] usb-storage: waiting for device to settle before scanningAug 25 18:20:27 Seqlimson kernel: [297620.692791] usb-storage: device scan completeAug 25 18:20:27 Seqlimson kernel: [297620.695783] scsi 6:0:0:0: Direct-Access Nokia Nokia 6300 0000 PQ: 0 ANSI: 4Aug 25 18:20:27 Seqlimson kernel: [297620.701755] sd 6:0:0:0: [sdb] 990977 512-byte hardware sectors (507 MB)Aug 25 18:20:27 Seqlimson kernel: [297620.704751] sd 6:0:0:0: [sdb] Write Protect is offAug 25 18:20:27 Seqlimson kernel: [297620.704754] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00Aug 25 18:20:27 Seqlimson kernel: [297620.704756] sd 6:0:0:0: [sdb] Assuming drive cache: write throughAug 25 18:20:27 Seqlimson kernel: [297620.716720] sd 6:0:0:0: [sdb] 990977 512-byte hardware sectors (507 MB)Aug 25 18:20:27 Seqlimson kernel: [297620.719710] sd 6:0:0:0: [sdb] Write Protect is offAug 25 18:20:27 Seqlimson kernel: [297620.719713] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00Aug 25 18:20:27 Seqlimson kernel: [297620.719716] sd 6:0:0:0: [sdb] Assuming drive cache: write throughAug 25 18:20:28 Seqlimson kernel: [297620.719719] sdb:Aug 25 18:20:28 Seqlimson kernel: [297620.817570] sd 6:0:0:0: [sdb] Attached SCSI removable diskAug 25 18:20:28 Seqlimson kernel: [297620.817610] sd 6:0:0:0: Attached scsi generic sg2 type 0Aug 25 18:20:28 Seqlimson kernel: [297620.908299] sd 6:0:0:0: [sdb] Sense Key : No Sense [current] Aug 25 18:20:28 Seqlimson kernel: [297620.908307] sd 6:0:0:0: [sdb] Add. Sense: No additional sense informationAug 25 18:20:28 Seqlimson kernel: [297621.072940] sd 6:0:0:0: [sdb] Sense Key : No Sense [current] Aug 25 18:20:28 Seqlimson kernel: [297621.072947] sd 6:0:0:0: [sdb] Add. Sense: No additional sense informationAug 25 18:20:28 Seqlimson kernel: [297621.241570] sd 6:0:0:0: [sdb] Sense Key : No Sense [current] Aug 25 18:20:28 Seqlimson kernel: [297621.241579] sd 6:0:0:0: [sdb] Add. Sense: No additional sense informationAug 25 18:20:31 Seqlimson kernel: [297623.827916] sd 6:0:0:0: [sdb] Sense Key : No Sense [current] Aug 25 18:20:31 Seqlimson kernel: [297623.827922] sd 6:0:0:0: [sdb] Add. Sense: No additional sense informationAug 25 18:26:51 Seqlimson kernel: [298002.993875] usb 2-2: USB disconnect, address 2Aug 25 18:26:51 Seqlimson kernel: [298003.020382] VFS: busy inodes on changed media.Aug 25 18:26:51 Seqlimson kernel: [298003.020393] scsi 6:0:0:0: rejecting I/O to dead deviceAug 25 18:26:51 Seqlimson kernel: [298003.020403] scsi 6:0:0:0: rejecting I/O to dead deviceAug 25 18:26:51 Seqlimson kernel: [298003.020407] scsi 6:0:0:0: rejecting I/O to dead deviceAug 25 18:26:51 Seqlimson kernel: [298003.020410] scsi 6:0:0:0: rejecting I/O to dead deviceAug 25 18:26:51 Seqlimson kernel: [298003.020412] scsi 6:0:0:0: [sdb] READ CAPACITY failedAug 25 18:26:51 Seqlimson kernel: [298003.020414] scsi 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OKAug 25 18:26:51 Seqlimson kernel: [298003.020417] scsi 6:0:0:0: [sdb] Sense not available.Aug 25 18:26:51 Seqlimson kernel: [298003.020420] scsi 6:0:0:0: rejecting I/O to dead deviceAug 25 18:26:51 Seqlimson kernel: [298003.020423] scsi 6:0:0:0: [sdb] Write Protect is offAug 25 18:26:51 Seqlimson kernel: [298003.020425] scsi 6:0:0:0: [sdb] Mode Sense: 00 00 00 00Aug 25 18:26:51 Seqlimson kernel: [298003.020427] scsi 6:0:0:0: [sdb] Assuming drive cache: write throughAug 25 18:27:46 Seqlimson kernel: [298058.395134] ip6_tables: (C) 2000-2006 Netfilter Core TeamAug 26 10:22:28 Seqlimson kernel: Inspecting /boot/System.map-2.6.24-19-genericAug 26 10:22:28 Seqlimson kernel: Loaded 27884 symbols from /boot/System.map-2.6.24-19-generic.Aug 26 10:22:28 Seqlimson kernel: Symbols match kernel version 2.6.24.Aug 26 10:22:28 Seqlimson kernel: Loaded 15463 symbols from 78 modules.Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Initializing cgroup subsys cpusetAug 26 10:22:28 Seqlimson kernel: [ 0.000000] Initializing cgroup subsys cpuAug 26 10:22:28 Seqlimson kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] BIOS-provided physical RAM map:Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d4ff800 (usable)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] BIOS-e820: 000000007d4ff800 - 000000007d553c00 (ACPI NVS)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] BIOS-e820: 000000007d553c00 - 000000007d555c00 (ACPI data)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] BIOS-e820: 000000007d555c00 - 000000007e000000 (reserved)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000fed00400 (reserved)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] 1108MB HIGHMEM available.Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] 896MB LOWMEM available.Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] found SMP MP-table at 000fe710Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Entering add_active_range(0, 0, 513279) 0 entries of 256 usedAug 26 10:22:28 Seqlimson kernel: [ 0.000000] Zone PFN ranges:Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] DMA 0 -> 4096Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Normal 4096 -> 229376Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] HighMem 229376 -> 513279Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Movable zone start PFN for each nodeAug 26 10:22:28 Seqlimson kernel: [ 0.000000] early_node_map[1] active PFN rangesAug 26 10:22:28 Seqlimson kernel: [ 0.000000] 0: 0 -> 513279Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] On node 0 totalpages: 513279Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] DMA zone: 32 pages used for memmapAug 26 10:22:28 Seqlimson kernel: [ 0.000000] DMA zone: 0 pages reservedAug 26 10:22:28 Seqlimson kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Normal zone: 1760 pages used for memmapAug 26 10:22:28 Seqlimson kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] HighMem zone: 2217 pages used for memmapAug 26 10:22:28 Seqlimson kernel: [ 0.000000] HighMem zone: 281686 pages, LIFO batch:31Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Movable zone: 0 pages used for memmapAug 26 10:22:28 Seqlimson kernel: [ 0.000000] DMI 2.5 present.Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00FEC00 checksum 0Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: RSDP 000FEC00, 0024 (r2 DELL )Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: XSDT 000FC5BB, 008C (r1 DELL B9K 15 ASL 61)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: FACP 000FC6EB, 00F4 (r3 DELL B9K 15 ASL 61)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: DSDT FFF789A5, 45A0 (r1 DELL dt_ex 1000 INTL 20050624)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: FACS 7D4FF800, 0040Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: SSDT FFF7D064, 00AA (r1 DELL st_ex 1000 INTL 20050624)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: APIC 000FC7DF, 0092 (r1 DELL B9K 15 ASL 61)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: BOOT 000FC871, 0028 (r1 DELL B9K 15 ASL 61)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: ASF! 000FC899, 0096 (r32 DELL B9K 15 ASL 61)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: MCFG 000FC92F, 003E (r1 DELL B9K 15 ASL 61)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: HPET 000FC96D, 0038 (r1 DELL B9K 15 ASL 61)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: TCPA 000FCBC9, 0032 (r1 DELL B9K 15 ASL 61)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: ____ 000FCBFB, 0030 (r1 DELL B9K 15 ASL 61)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: SLIC 000FC9A5, 0176 (r1 DELL B9K 15 ASL 61)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: SSDT 7D4FF840, 0175 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: SSDT 7D4FFC49, 0175 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: SSDT 7D500052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Processor #0 6:15 APIC version 20Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Processor #1 6:15 APIC version 20Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: IRQ0 used by override.Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: IRQ2 used by override.Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: IRQ9 used by override.Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsAug 26 10:22:28 Seqlimson kernel: [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationAug 26 10:22:28 Seqlimson kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7e000000:62000000)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000f0000Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 509270Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Kernel command line: root=UUID=ee155e83-7895-4eb9-9523-ce047ecfe937 ro quiet splashAug 26 10:22:28 Seqlimson kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Enabling fast FPU save and restore... done.Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Initializing CPU#0Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)Aug 26 10:22:28 Seqlimson kernel: [ 0.000000] Detected 2327.556 MHz processor.Aug 26 10:22:28 Seqlimson kernel: [ 18.845022] Console: colour VGA+ 80x25Aug 26 10:22:28 Seqlimson kernel: [ 18.845024] console [tty0] enabledAug 26 10:22:28 Seqlimson kernel: [ 18.845216] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Aug 26 10:22:28 Seqlimson kernel: [ 18.845424] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Aug 26 10:22:28 Seqlimson kernel: [ 18.908309] Memory: 2023552k/2053116k available (2177k kernel code, 28376k reserved, 1006k data, 368k init, 1135612k highmem)Aug 26 10:22:28 Seqlimson kernel: [ 18.908315] virtual kernel memory layout:Aug 26 10:22:28 Seqlimson kernel: [ 18.908316] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)Aug 26 10:22:28 Seqlimson kernel: [ 18.908316] pkmap : 0xff800000 - 0xffc00000 (4096 kB)Aug 26 10:22:28 Seqlimson kernel: [ 18.908317] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)Aug 26 10:22:28 Seqlimson kernel: [ 18.908318] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)Aug 26 10:22:28 Seqlimson kernel: [ 18.908319] .init : 0xc0421000 - 0xc047d000 ( 368 kB)Aug 26 10:22:28 Seqlimson kernel: [ 18.908319] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)Aug 26 10:22:28 Seqlimson kernel: [ 18.908320] .text : 0xc0100000 - 0xc0320474 (2177 kB)Aug 26 10:22:28 Seqlimson kernel: [ 18.908322] Checking if this processor honours the WP bit even in supervisor mode... Ok.Aug 26 10:22:28 Seqlimson kernel: [ 18.908354] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1Aug 26 10:22:28 Seqlimson kernel: [ 18.908461] hpet clockevent registeredAug 26 10:22:28 Seqlimson kernel: [ 18.988290] Calibrating delay using timer specific routine.. 4658.37 BogoMIPS (lpj=9316754)Aug 26 10:22:28 Seqlimson kernel: [ 18.988307] Security Framework initializedAug 26 10:22:28 Seqlimson kernel: [ 18.988312] SELinux: Disabled at boot.Aug 26 10:22:28 Seqlimson kernel: [ 18.988322] AppArmor: AppArmor initializedAug 26 10:22:28 Seqlimson kernel: [ 18.988325] Failure registering capabilities with primary security module.Aug 26 10:22:28 Seqlimson kernel: [ 18.988331] Mount-cache hash table entries: 512Aug 26 10:22:28 Seqlimson kernel: [ 18.988422] Initializing cgroup subsys nsAug 26 10:22:28 Seqlimson kernel: [ 18.988426] Initializing cgroup subsys cpuacctAug 26 10:22:28 Seqlimson kernel: [ 18.988434] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3fd 00000000 00000001 00000000Aug 26 10:22:28 Seqlimson kernel: [ 18.988439] monitor/mwait feature present.Aug 26 10:22:28 Seqlimson kernel: [ 18.988440] using mwait in idle threads.Aug 26 10:22:28 Seqlimson kernel: [ 18.988443] CPU: L1 I cache: 32K, L1 D cache: 32KAug 26 10:22:28 Seqlimson kernel: [ 18.988445] CPU: L2 cache: 4096KAug 26 10:22:28 Seqlimson kernel: [ 18.988447] CPU: Physical Processor ID: 0Aug 26 10:22:28 Seqlimson kernel: [ 18.988448] CPU: Processor Core ID: 0Aug 26 10:22:28 Seqlimson kernel: [ 18.988449] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3fd 00000000 00000001 00000000Aug 26 10:22:28 Seqlimson kernel: [ 18.988455] Compat vDSO mapped to ffffe000.Aug 26 10:22:28 Seqlimson kernel: [ 18.988465] Checking 'hlt' instruction... OK.Aug 26 10:22:28 Seqlimson kernel: [ 19.004591] SMP alternatives: switching to UP codeAug 26 10:22:28 Seqlimson kernel: [ 19.005852] Early unpacking initramfs... doneAug 26 10:22:28 Seqlimson kernel: [ 19.250105] ACPI: Core revision 20070126Aug 26 10:22:28 Seqlimson kernel: [ 19.324132] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.Aug 26 10:22:28 Seqlimson kernel: [ 19.449866] CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0bAug 26 10:22:28 Seqlimson kernel: [ 19.449878] SMP alternatives: switching to SMP codeAug 26 10:22:28 Seqlimson kernel: [ 19.450429] Booting processor 1/1 eip 3000Aug 26 10:22:28 Seqlimson kernel: [ 19.460727] Initializing CPU#1Aug 26 10:22:28 Seqlimson kernel: [ 19.539077] Calibrating delay using timer specific routine.. 4654.99 BogoMIPS (lpj=9309983)Aug 26 10:22:28 Seqlimson kernel: [ 19.539082] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3fd 00000000 00000001 00000000Aug 26 10:22:28 Seqlimson kernel: [ 19.539087] monitor/mwait feature present.Aug 26 10:22:28 Seqlimson kernel: [ 19.539089] CPU: L1 I cache: 32K, L1 D cache: 32KAug 26 10:22:28 Seqlimson kernel: [ 19.539091] CPU: L2 cache: 4096KAug 26 10:22:28 Seqlimson kernel: [ 19.539092] CPU: Physical Processor ID: 0Aug 26 10:22:28 Seqlimson kernel: [ 19.539093] CPU: Processor Core ID: 1Aug 26 10:22:28 Seqlimson kernel: [ 19.539094] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3fd 00000000 00000001 00000000Aug 26 10:22:28 Seqlimson kernel: [ 19.539747] CPU1: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0bAug 26 10:22:28 Seqlimson kernel: [ 19.539763] Total of 2 processors activated (9313.36 BogoMIPS).Aug 26 10:22:28 Seqlimson kernel: [ 19.539903] ENABLING IO-APIC IRQsAug 26 10:22:28 Seqlimson kernel: [ 19.540064] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1Aug 26 10:22:28 Seqlimson kernel: [ 19.686836] checking TSC synchronization [CPU#0 -> CPU#1]: passed.Aug 26 10:22:28 Seqlimson kernel: [ 19.706804] Brought up 2 CPUsAug 26 10:22:28 Seqlimson kernel: [ 19.706823] CPU0 attaching sched-domain:Aug 26 10:22:28 Seqlimson kernel: [ 19.706825] domain 0: span 03Aug 26 10:22:28 Seqlimson kernel: [ 19.706826] groups: 01 02Aug 26 10:22:28 Seqlimson kernel: [ 19.706829] CPU1 attaching sched-domain:Aug 26 10:22:28 Seqlimson kernel: [ 19.706830] domain 0: span 03Aug 26 10:22:28 Seqlimson kernel: [ 19.706831] groups: 02 01Aug 26 10:22:28 Seqlimson kernel: [ 19.706991] net_namespace: 64 bytesAug 26 10:22:28 Seqlimson kernel: [ 19.707000] Booting paravirtualized kernel on bare hardwareAug 26 10:22:28 Seqlimson kernel: [ 19.707321] Time: 10:22:09 Date: 08/26/08Aug 26 10:22:28 Seqlimson kernel: [ 19.707340] NET: Registered protocol family 16Aug 26 10:22:28 Seqlimson kernel: [ 19.707474] EISA bus registeredAug 26 10:22:28 Seqlimson kernel: [ 19.707477] ACPI: bus type pci registeredAug 26 10:22:28 Seqlimson kernel: [ 19.713505] PCI: PCI BIOS revision 2.10 entry at 0xfb05f, last bus=3Aug 26 10:22:28 Seqlimson kernel: [ 19.713507] PCI: Using configuration type 1Aug 26 10:22:28 Seqlimson kernel: [ 19.713518] Setting up standard PCI resourcesAug 26 10:22:28 Seqlimson kernel: [ 19.726746] ACPI: EC: Look up EC in DSDTAug 26 10:22:28 Seqlimson kernel: [ 19.790295] ACPI: BIOS _OSI(Linux) query ignoredAug 26 10:22:28 Seqlimson kernel: [ 19.790297] ACPI: DMI System Vendor: Dell Inc.Aug 26 10:22:28 Seqlimson kernel: [ 19.790298] ACPI: DMI Product Name: OptiPlex 755 Aug 26 10:22:28 Seqlimson kernel: [ 19.790299] ACPI: DMI Product Version: Aug 26 10:22:28 Seqlimson kernel: [ 19.790300] ACPI: DMI Board Name: 0DR845Aug 26 10:22:28 Seqlimson kernel: [ 19.790301] ACPI: DMI BIOS Vendor: Dell Inc.Aug 26 10:22:28 Seqlimson kernel: [ 19.790302] ACPI: DMI BIOS Date: 11/05/2007Aug 26 10:22:28 Seqlimson kernel: [ 19.790303] ACPI: Please send DMI info above to linux-acpi@vger.kernel.orgAug 26 10:22:28 Seqlimson kernel: [ 19.790305] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.orgAug 26 10:22:28 Seqlimson kernel: [ 19.822041] ACPI: Interpreter enabledAug 26 10:22:28 Seqlimson kernel: [ 19.822043] ACPI: (supports S0 S1 S3 S4 S5)Aug 26 10:22:28 Seqlimson kernel: [ 19.822055] ACPI: Using IOAPIC for interrupt routingAug 26 10:22:28 Seqlimson kernel: [ 19.956848] ACPI: PCI Root Bridge [PCI0] (0000:00)Aug 26 10:22:28 Seqlimson kernel: [ 19.957594] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCOAug 26 10:22:28 Seqlimson kernel: [ 19.957597] PCI quirk: region 0880-08bf claimed by ICH6 GPIOAug 26 10:22:28 Seqlimson kernel: [ 19.957863] PCI: Transparent bridge - 0000:00:1e.0Aug 26 10:22:28 Seqlimson kernel: [ 19.957883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]Aug 26 10:22:28 Seqlimson kernel: [ 19.958657] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]Aug 26 10:22:28 Seqlimson kernel: [ 19.959253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]Aug 26 10:22:28 Seqlimson kernel: [ 19.959716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]Aug 26 10:22:28 Seqlimson kernel: [ 21.886846] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)Aug 26 10:22:28 Seqlimson kernel: [ 21.887601] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)Aug 26 10:22:28 Seqlimson kernel: [ 21.888337] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)Aug 26 10:22:28 Seqlimson kernel: [ 21.889073] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)Aug 26 10:22:28 Seqlimson kernel: [ 21.889817] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.Aug 26 10:22:28 Seqlimson kernel: [ 21.890557] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)Aug 26 10:22:28 Seqlimson kernel: [ 21.891310] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)Aug 26 10:22:28 Seqlimson kernel: [ 21.892045] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)Aug 26 10:22:28 Seqlimson kernel: [ 21.892487] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 87 [20070126]Aug 26 10:22:28 Seqlimson kernel: [ 21.892500] Linux Plug and Play Support v0.97 (c) Adam BelayAug 26 10:22:28 Seqlimson kernel: [ 21.892521] pnp: PnP ACPI initAug 26 10:22:28 Seqlimson kernel: [ 21.892527] ACPI: bus type pnp registeredAug 26 10:22:28 Seqlimson kernel: [ 21.949643] pnp: PnP ACPI: found 9 devicesAug 26 10:22:28 Seqlimson kernel: [ 21.949645] ACPI: ACPI bus type pnp unregisteredAug 26 10:22:28 Seqlimson kernel: [ 21.949647] PnPBIOS: Disabled by ACPI PNPAug 26 10:22:28 Seqlimson kernel: [ 21.949789] PCI: Using ACPI for IRQ routingAug 26 10:22:28 Seqlimson kernel: [ 21.949791] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportAug 26 10:22:28 Seqlimson kernel: [ 21.949794] PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0Aug 26 10:22:28 Seqlimson kernel: [ 21.949795] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0Aug 26 10:22:28 Seqlimson kernel: [ 21.949799] PCI: Cannot allocate resource region 0 of device 0000:00:02.0Aug 26 10:22:28 Seqlimson kernel: [ 21.949801] PCI: Cannot allocate resource region 3 of device 0000:00:02.0Aug 26 10:22:28 Seqlimson kernel: [ 21.949803] PCI: Cannot allocate resource region 0 of device 0000:00:02.1Aug 26 10:22:28 Seqlimson kernel: [ 21.949807] PCI: Cannot allocate resource region 1 of device 0000:00:03.3Aug 26 10:22:28 Seqlimson kernel: [ 21.949810] PCI: Cannot allocate resource region 0 of device 0000:00:19.0Aug 26 10:22:28 Seqlimson kernel: [ 21.949811] PCI: Cannot allocate resource region 1 of device 0000:00:19.0Aug 26 10:22:28 Seqlimson kernel: [ 21.949816] PCI: Cannot allocate resource region 0 of device 0000:00:1a.7Aug 26 10:22:28 Seqlimson kernel: [ 21.949819] PCI: Cannot allocate resource region 0 of device 0000:00:1b.0Aug 26 10:22:28 Seqlimson kernel: [ 21.949830] PCI: Cannot allocate resource region 0 of device 0000:00:1f.3Aug 26 10:22:28 Seqlimson kernel: [ 21.989765] NET: Registered protocol family 8Aug 26 10:22:28 Seqlimson kernel: [ 21.989767] NET: Registered protocol family 20Aug 26 10:22:28 Seqlimson kernel: [ 21.989791] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0Aug 26 10:22:28 Seqlimson kernel: [ 21.989795] hpet0: 4 64-bit timers, 14318180 HzAug 26 10:22:28 Seqlimson kernel: [ 21.990818] AppArmor: AppArmor Filesystem EnabledAug 26 10:22:28 Seqlimson kernel: [ 21.993762] Time: tsc clocksource has been installed.Aug 26 10:22:28 Seqlimson kernel: [ 21.993768] Switched to high resolution mode on CPU 0Aug 26 10:22:28 Seqlimson kernel: [ 21.993849] Switched to high resolution mode on CPU 1Aug 26 10:22:28 Seqlimson kernel: [ 22.009605] system 00:01: ioport range 0x800-0x85f has been reservedAug 26 10:22:28 Seqlimson kernel: [ 22.009608] system 00:01: ioport range 0xc00-0xc7f has been reservedAug 26 10:22:28 Seqlimson kernel: [ 22.009610] system 00:01: ioport range 0x860-0x8ff could not be reservedAug 26 10:22:28 Seqlimson kernel: [ 22.039869] PCI: Bridge: 0000:00:01.0Aug 26 10:22:28 Seqlimson kernel: [ 22.039870] IO window: disabled.Aug 26 10:22:28 Seqlimson kernel: [ 22.039873] MEM window: disabled.Aug 26 10:22:28 Seqlimson kernel: [ 22.039874] PREFETCH window: disabled.Aug 26 10:22:28 Seqlimson kernel: [ 22.039877] PCI: Bridge: 0000:00:1c.0Aug 26 10:22:28 Seqlimson kernel: [ 22.039878] IO window: disabled.Aug 26 10:22:28 Seqlimson kernel: [ 22.039881] MEM window: disabled.Aug 26 10:22:28 Seqlimson kernel: [ 22.039883] PREFETCH window: disabled.Aug 26 10:22:28 Seqlimson kernel: [ 22.039886] PCI: Bridge: 0000:00:1e.0Aug 26 10:22:28 Seqlimson kernel: [ 22.039887] IO window: disabled.Aug 26 10:22:28 Seqlimson kernel: [ 22.039890] MEM window: disabled.Aug 26 10:22:28 Seqlimson kernel: [ 22.039893] PREFETCH window: disabled.Aug 26 10:22:28 Seqlimson kernel: [ 22.039903] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 26 10:22:28 Seqlimson kernel: [ 22.039907] PCI: Setting latency timer of device 0000:00:01.0 to 64Aug 26 10:22:28 Seqlimson kernel: [ 22.039920] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 26 10:22:28 Seqlimson kernel: [ 22.039924] PCI: Setting latency timer of device 0000:00:1c.0 to 64Aug 26 10:22:28 Seqlimson kernel: [ 22.039931] PCI: Setting latency timer of device 0000:00:1e.0 to 64Aug 26 10:22:28 Seqlimson kernel: [ 22.039938] NET: Registered protocol family 2Aug 26 10:22:28 Seqlimson kernel: [ 22.077474] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)Aug 26 10:22:28 Seqlimson kernel: [ 22.077644] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)Aug 26 10:22:28 Seqlimson kernel: [ 22.077940] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)Aug 26 10:22:28 Seqlimson kernel: [ 22.078075] TCP: Hash tables configured (established 131072 bind 65536)Aug 26 10:22:28 Seqlimson kernel: [ 22.078076] TCP reno registeredAug 26 10:22:28 Seqlimson kernel: [ 22.089502] checking if image is initramfs... it isAug 26 10:22:28 Seqlimson kernel: [ 22.569094] Freeing initrd memory: 7312k freedAug 26 10:22:28 Seqlimson kernel: [ 22.569205] Simple Boot Flag at 0x7a set to 0x1Aug 26 10:22:28 Seqlimson kernel: [ 22.569641] audit: initializing netlink socket (disabled)Aug 26 10:22:28 Seqlimson kernel: [ 22.569652] audit(1219746131.545:1): initializedAug 26 10:22:28 Seqlimson kernel: [ 22.569803] highmem bounce pool size: 64 pagesAug 26 10:22:28 Seqlimson kernel: [ 22.571126] VFS: Disk quotas dquot_6.5.1Aug 26 10:22:28 Seqlimson kernel: [ 22.571178] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Aug 26 10:22:28 Seqlimson kernel: [ 22.571275] io scheduler noop registeredAug 26 10:22:28 Seqlimson kernel: [ 22.571276] io scheduler anticipatory registeredAug 26 10:22:28 Seqlimson kernel: [ 22.571278] io scheduler deadline registeredAug 26 10:22:28 Seqlimson kernel: [ 22.571285] io scheduler cfq registered (default)Aug 26 10:22:28 Seqlimson kernel: [ 22.571295] Boot video device is 0000:00:02.0Aug 26 10:22:28 Seqlimson kernel: [ 22.571451] PCI: Setting latency timer of device 0000:00:01.0 to 64Aug 26 10:22:28 Seqlimson kernel: [ 22.571476] assign_interrupt_mode Found MSI capabilityAug 26 10:22:28 Seqlimson kernel: [ 22.571497] Allocate Port Service[0000:00:01.0:pcie00]Aug 26 10:22:28 Seqlimson kernel: [ 22.571550] PCI: Setting latency timer of device 0000:00:1c.0 to 64Aug 26 10:22:28 Seqlimson kernel: [ 22.571581] assign_interrupt_mode Found MSI capabilityAug 26 10:22:28 Seqlimson kernel: [ 22.571607] Allocate Port Service[0000:00:1c.0:pcie00]Aug 26 10:22:28 Seqlimson kernel: [ 22.571627] Allocate Port Service[0000:00:1c.0:pcie02]Aug 26 10:22:28 Seqlimson kernel: [ 22.571787] isapnp: Scanning for PnP cards...Aug 26 10:22:28 Seqlimson kernel: [ 22.924028] isapnp: No Plug & Play device foundAug 26 10:22:28 Seqlimson kernel: [ 22.940860] Real Time Clock Driver v1.12acAug 26 10:22:28 Seqlimson kernel: [ 22.941118] hpet_resources: 0xfed00000 is busyAug 26 10:22:28 Seqlimson kernel: [ 22.941131] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledAug 26 10:22:28 Seqlimson kernel: [ 22.941233] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AAug 26 10:22:28 Seqlimson kernel: [ 22.941670] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AAug 26 10:22:28 Seqlimson kernel: [ 22.941757] ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17Aug 26 10:22:28 Seqlimson kernel: [ 22.941828] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550AAug 26 10:22:28 Seqlimson kernel: [ 22.942286] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeAug 26 10:22:28 Seqlimson kernel: [ 22.942332] input: Macintosh mouse button emulation as /devices/virtual/input/input0Aug 26 10:22:28 Seqlimson kernel: [ 22.942425] PNP: No PS/2 controller found. Probing ports directly.Aug 26 10:22:28 Seqlimson kernel: [ 22.944825] serio: i8042 KBD port at 0x60,0x64 irq 1Aug 26 10:22:28 Seqlimson kernel: [ 22.944829] serio: i8042 AUX port at 0x60,0x64 irq 12Aug 26 10:22:28 Seqlimson kernel: [ 22.963570] mice: PS/2 mouse device common for all miceAug 26 10:22:28 Seqlimson kernel: [ 22.963655] EISA: Probing bus 0 at eisa.0Aug 26 10:22:28 Seqlimson kernel: [ 22.963685] EISA: Detected 0 cards.Aug 26 10:22:28 Seqlimson kernel: [ 22.963687] cpuidle: using governor ladderAug 26 10:22:28 Seqlimson kernel: [ 22.963688] cpuidle: using governor menuAug 26 10:22:28 Seqlimson kernel: [ 22.963746] NET: Registered protocol family 1Aug 26 10:22:28 Seqlimson kernel: [ 22.963767] Using IPI No-Shortcut modeAug 26 10:22:28 Seqlimson kernel: [ 22.963787] registered taskstats version 1Aug 26 10:22:28 Seqlimson kernel: [ 22.963871] Magic number: 4:847:376Aug 26 10:22:28 Seqlimson kernel: [ 22.963903] BIOS EDD facility v0.16 2004-Jun-25, 0 devices foundAug 26 10:22:28 Seqlimson kernel: [ 22.963904] EDD information not available.Aug 26 10:22:28 Seqlimson kernel: [ 22.964021] Freeing unused kernel memory: 368k freedAug 26 10:22:28 Seqlimson kernel: [ 24.111846] fuse init (API version 7.9)Aug 26 10:22:28 Seqlimson kernel: [ 24.125307] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]Aug 26 10:22:28 Seqlimson kernel: [ 24.125315] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]Aug 26 10:22:28 Seqlimson kernel: [ 24.238452] usbcore: registered new interface driver usbfsAug 26 10:22:28 Seqlimson kernel: [ 24.238467] usbcore: registered new interface driver hubAug 26 10:22:28 Seqlimson kernel: [ 24.238611] SCSI subsystem initializedAug 26 10:22:28 Seqlimson kernel: [ 24.251013] usbcore: registered new device driver usbAug 26 10:22:28 Seqlimson kernel: [ 24.252258] USB Universal Host Controller Interface driver v3.0Aug 26 10:22:28 Seqlimson kernel: [ 24.252293] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 26 10:22:28 Seqlimson kernel: [ 24.252301] PCI: Setting latency timer of device 0000:00:1a.0 to 64Aug 26 10:22:28 Seqlimson kernel: [ 24.252304] uhci_hcd 0000:00:1a.0: UHCI Host ControllerAug 26 10:22:28 Seqlimson kernel: [ 24.252456] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1Aug 26 10:22:28 Seqlimson kernel: [ 24.252479] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20Aug 26 10:22:28 Seqlimson kernel: [ 24.252568] usb usb1: configuration #1 chosen from 1 choiceAug 26 10:22:28 Seqlimson kernel: [ 24.252585] hub 1-0:1.0: USB hub foundAug 26 10:22:28 Seqlimson kernel: [ 24.252588] hub 1-0:1.0: 2 ports detectedAug 26 10:22:28 Seqlimson kernel: [ 24.253183] libata version 3.00 loaded.Aug 26 10:22:28 Seqlimson kernel: [ 24.356460] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17Aug 26 10:22:28 Seqlimson kernel: [ 24.356469] PCI: Setting latency timer of device 0000:00:1a.1 to 64Aug 26 10:22:28 Seqlimson kernel: [ 24.356471] uhci_hcd 0000:00:1a.1: UHCI Host ControllerAug 26 10:22:28 Seqlimson kernel: [ 24.356487] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2Aug 26 10:22:28 Seqlimson kernel: [ 24.356511] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00Aug 26 10:22:28 Seqlimson kernel: [ 24.356586] usb usb2: configuration #1 chosen from 1 choiceAug 26 10:22:28 Seqlimson kernel: [ 24.356602] hub 2-0:1.0: USB hub foundAug 26 10:22:28 Seqlimson kernel: [ 24.356606] hub 2-0:1.0: 2 ports detectedAug 26 10:22:28 Seqlimson kernel: [ 24.460240] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18Aug 26 10:22:28 Seqlimson kernel: [ 24.460249] PCI: Setting latency timer of device 0000:00:1d.0 to 64Aug 26 10:22:28 Seqlimson kernel: [ 24.460252] uhci_hcd 0000:00:1d.0: UHCI Host ControllerAug 26 10:22:28 Seqlimson kernel: [ 24.460269] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3Aug 26 10:22:28 Seqlimson kernel: [ 24.460290] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80Aug 26 10:22:28 Seqlimson kernel: [ 24.460367] usb usb3: configuration #1 chosen from 1 choiceAug 26 10:22:28 Seqlimson kernel: [ 24.460385] hub 3-0:1.0: USB hub foundAug 26 10:22:28 Seqlimson kernel: [ 24.460388] hub 3-0:1.0: 2 ports detectedAug 26 10:22:28 Seqlimson kernel: [ 24.563994] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17Aug 26 10:22:28 Seqlimson kernel: [ 24.564001] PCI: Setting latency timer of device 0000:00:1d.1 to 64Aug 26 10:22:28 Seqlimson kernel: [ 24.564004] uhci_hcd 0000:00:1d.1: UHCI Host ControllerAug 26 10:22:28 Seqlimson kernel: [ 24.564019] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4Aug 26 10:22:28 Seqlimson kernel: [ 24.564039] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60Aug 26 10:22:28 Seqlimson kernel: [ 24.564122] usb usb4: configuration #1 chosen from 1 choiceAug 26 10:22:28 Seqlimson kernel: [ 24.564138] hub 4-0:1.0: USB hub foundAug 26 10:22:28 Seqlimson kernel: [ 24.564141] hub 4-0:1.0: 2 ports detectedAug 26 10:22:28 Seqlimson kernel: [ 24.667771] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19Aug 26 10:22:28 Seqlimson kernel: [ 24.667779] PCI: Setting latency timer of device 0000:00:1d.2 to 64Aug 26 10:22:28 Seqlimson kernel: [ 24.667781] uhci_hcd 0000:00:1d.2: UHCI Host ControllerAug 26 10:22:28 Seqlimson kernel: [ 24.667797] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5Aug 26 10:22:28 Seqlimson kernel: [ 24.667818] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000ff40Aug 26 10:22:28 Seqlimson kernel: [ 24.667893] usb usb5: configuration #1 chosen from 1 choiceAug 26 10:22:28 Seqlimson kernel: [ 24.667909] hub 5-0:1.0: USB hub foundAug 26 10:22:28 Seqlimson kernel: [ 24.667912] hub 5-0:1.0: 2 ports detectedAug 26 10:22:28 Seqlimson kernel: [ 24.768592] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 20Aug 26 10:22:28 Seqlimson kernel: [ 24.768602] PCI: Setting latency timer of device 0000:00:1a.7 to 64Aug 26 10:22:28 Seqlimson kernel: [ 24.768605] ehci_hcd 0000:00:1a.7: EHCI Host ControllerAug 26 10:22:28 Seqlimson kernel: [ 24.768625] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6Aug 26 10:22:28 Seqlimson kernel: [ 24.772510] ehci_hcd 0000:00:1a.7: debug port 1Aug 26 10:22:28 Seqlimson kernel: [ 24.772515] PCI: cache line size of 32 is not supported by device 0000:00:1a.7Aug 26 10:22:28 Seqlimson kernel: [ 24.772521] ehci_hcd 0000:00:1a.7: irq 20, io mem 0x80226000Aug 26 10:22:28 Seqlimson kernel: [ 24.787450] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Aug 26 10:22:28 Seqlimson kernel: [ 24.787523] usb usb6: configuration #1 chosen from 1 choiceAug 26 10:22:28 Seqlimson kernel: [ 24.787543] hub 6-0:1.0: USB hub foundAug 26 10:22:28 Seqlimson kernel: [ 24.787547] hub 6-0:1.0: 6 ports detectedAug 26 10:22:28 Seqlimson kernel: [ 24.891298] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18Aug 26 10:22:28 Seqlimson kernel: [ 24.891306] PCI: Setting latency timer of device 0000:00:1d.7 to 64Aug 26 10:22:28 Seqlimson kernel: [ 24.891309] ehci_hcd 0000:00:1d.7: EHCI Host ControllerAug 26 10:22:28 Seqlimson kernel: [ 24.891325] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7Aug 26 10:22:28 Seqlimson kernel: [ 24.895225] ehci_hcd 0000:00:1d.7: debug port 1Aug 26 10:22:28 Seqlimson kernel: [ 24.895229] PCI: cache line size of 32 is not supported by device 0000:00:1d.7Aug 26 10:22:28 Seqlimson kernel: [ 24.895233] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xff980800Aug 26 10:22:28 Seqlimson kernel: [ 24.903188] usb 4-1: new full speed USB device using uhci_hcd and address 2Aug 26 10:22:28 Seqlimson kernel: [ 24.915162] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Aug 26 10:22:28 Seqlimson kernel: [ 24.915234] usb usb7: configuration #1 chosen from 1 choiceAug 26 10:22:28 Seqlimson kernel: [ 24.915251] hub 7-0:1.0: USB hub foundAug 26 10:22:28 Seqlimson kernel: [ 24.915254] hub 7-0:1.0: 6 ports detectedAug 26 10:22:28 Seqlimson kernel: [ 25.019076] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 18 (level, low) -> IRQ 19Aug 26 10:22:28 Seqlimson kernel: [ 25.019100] PCI: Setting latency timer of device 0000:00:03.2 to 64Aug 26 10:22:28 Seqlimson kernel: [ 25.019109] ACPI: PCI interrupt for device 0000:00:03.2 disabledAug 26 10:22:28 Seqlimson kernel: [ 25.019136] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 18 (level, low) -> IRQ 19Aug 26 10:22:28 Seqlimson kernel: [ 25.019149] PCI: Setting latency timer of device 0000:00:1f.2 to 64Aug 26 10:22:28 Seqlimson kernel: [ 25.019156] ACPI: PCI interrupt for device 0000:00:1f.2 disabledAug 26 10:22:28 Seqlimson kernel: [ 25.019169] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 19Aug 26 10:22:28 Seqlimson kernel: [ 25.019182] PCI: Setting latency timer of device 0000:00:1f.5 to 64Aug 26 10:22:28 Seqlimson kernel: [ 25.019189] ACPI: PCI interrupt for device 0000:00:1f.5 disabledAug 26 10:22:28 Seqlimson kernel: [ 25.024261] ata_piix 0000:00:1f.2: version 2.12Aug 26 10:22:28 Seqlimson kernel: [ 25.024265] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]Aug 26 10:22:28 Seqlimson kernel: [ 25.178603] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 18 (level, low) -> IRQ 19Aug 26 10:22:28 Seqlimson kernel: [ 25.178626] PCI: Setting latency timer of device 0000:00:1f.2 to 64Aug 26 10:22:28 Seqlimson kernel: [ 25.178675] scsi0 : ata_piixAug 26 10:22:28 Seqlimson kernel: [ 25.178789] scsi1 : ata_piixAug 26 10:22:28 Seqlimson kernel: [ 25.183468] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfec0 irq 14Aug 26 10:22:28 Seqlimson kernel: [ 25.183470] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfec8 irq 15Aug 26 10:22:28 Seqlimson kernel: [ 25.384363] ata1.00: ATA-7: ST3160815AS, 3.ADA, max UDMA/133Aug 26 10:22:28 Seqlimson kernel: [ 25.384367] ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)Aug 26 10:22:28 Seqlimson kernel: [ 25.450859] ata1.00: configured for UDMA/133Aug 26 10:22:28 Seqlimson kernel: [ 25.761291] usb 4-1: new full speed USB device using uhci_hcd and address 3Aug 26 10:22:28 Seqlimson kernel: [ 25.931141] usb 4-1: configuration #1 chosen from 1 choiceAug 26 10:22:28 Seqlimson kernel: [ 25.937078] hub 4-1:1.0: USB hub foundAug 26 10:22:28 Seqlimson kernel: [ 25.938060] hub 4-1:1.0: 3 ports detectedAug 26 10:22:28 Seqlimson kernel: [ 25.942062] ata2.00: ATAPI: PBDS DVD+/-RW DH-16W1S, 2D14, max UDMA/100Aug 26 10:22:28 Seqlimson kernel: [ 26.128670] ata2.00: configured for UDMA/100Aug 26 10:22:28 Seqlimson kernel: [ 26.128754] scsi 0:0:0:0: Direct-Access ATA ST3160815AS 3.AD PQ: 0 ANSI: 5Aug 26 10:22:28 Seqlimson kernel: [ 26.129702] scsi 1:0:0:0: CD-ROM PBDS DVD+-RW DH-16W1S 2D14 PQ: 0 ANSI: 5Aug 26 10:22:28 Seqlimson kernel: [ 26.129749] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]Aug 26 10:22:28 Seqlimson kernel: [ 26.285154] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 19Aug 26 10:22:28 Seqlimson kernel: [ 26.285175] PCI: Setting latency timer of device 0000:00:1f.5 to 64Aug 26 10:22:28 Seqlimson kernel: [ 26.285200] usb 4-2: new low speed USB device using uhci_hcd and address 4Aug 26 10:22:28 Seqlimson kernel: [ 26.285209] scsi2 : ata_piixAug 26 10:22:28 Seqlimson kernel: [ 26.285319] scsi3 : ata_piixAug 26 10:22:28 Seqlimson kernel: [ 26.285344] ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 19Aug 26 10:22:28 Seqlimson kernel: [ 26.285346] ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 19Aug 26 10:22:28 Seqlimson kernel: [ 26.464969] usb 4-2: configuration #1 chosen from 1 choiceAug 26 10:22:28 Seqlimson kernel: [ 26.673451] usb 4-1.1: new low speed USB device using uhci_hcd and address 5Aug 26 10:22:28 Seqlimson kernel: [ 26.814208] usb 4-1.1: configuration #1 chosen from 1 choiceAug 26 10:22:28 Seqlimson kernel: [ 26.848080] usbcore: registered new interface driver hiddevAug 26 10:22:28 Seqlimson kernel: [ 26.865216] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb4/4-2/4-2:1.0/input/input1Aug 26 10:22:28 Seqlimson kernel: [ 26.883854] input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.1-2Aug 26 10:22:28 Seqlimson kernel: [ 26.898142] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input2Aug 26 10:22:28 Seqlimson kernel: [ 26.907783] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-1.1Aug 26 10:22:28 Seqlimson kernel: [ 26.941905] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1.1/4-1.1:1.1/input/input3Aug 26 10:22:28 Seqlimson kernel: [ 26.959667] input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.1-1.1Aug 26 10:22:28 Seqlimson kernel: [ 26.959676] usbcore: registered new interface driver usbhidAug 26 10:22:28 Seqlimson kernel: [ 26.959679] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driverAug 26 10:22:28 Seqlimson kernel: [ 27.279375] Driver 'sd' needs updating - please use bus_type methodsAug 26 10:22:28 Seqlimson kernel: [ 27.279425] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)Aug 26 10:22:28 Seqlimson kernel: [ 27.279433] sd 0:0:0:0: [sda] Write Protect is offAug 26 10:22:28 Seqlimson kernel: [ 27.279435] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00Aug 26 10:22:28 Seqlimson kernel: [ 27.279446] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAAug 26 10:22:28 Seqlimson kernel: [ 27.279483] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)Aug 26 10:22:28 Seqlimson kernel: [ 27.279490] sd 0:0:0:0: [sda] Write Protect is offAug 26 10:22:28 Seqlimson kernel: [ 27.279492] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00Aug 26 10:22:28 Seqlimson kernel: [ 27.279503] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAAug 26 10:22:28 Seqlimson kernel: [ 27.279505] sda:<4>Driver 'sr' needs updating - please use bus_type methodsAug 26 10:22:28 Seqlimson kernel: [ 27.302299] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4Aug 26 10:22:28 Seqlimson kernel: [ 27.350023] sd 0:0:0:0: [sda] Attached SCSI diskAug 26 10:22:28 Seqlimson kernel: [ 27.353134] sd 0:0:0:0: Attached scsi generic sg0 type 0Aug 26 10:22:28 Seqlimson kernel: [ 27.353146] sr 1:0:0:0: Attached scsi generic sg1 type 5Aug 26 10:22:28 Seqlimson kernel: [ 27.357079] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda trayAug 26 10:22:28 Seqlimson kernel: [ 27.357081] Uniform CD-ROM driver Revision: 3.20Aug 26 10:22:28 Seqlimson kernel: [ 27.357109] sr 1:0:0:0: Attached scsi CD-ROM sr0Aug 26 10:22:28 Seqlimson kernel: [ 27.701132] Attempting manual resumeAug 26 10:22:28 Seqlimson kernel: [ 27.701135] swsusp: Resume From Partition 8:8Aug 26 10:22:28 Seqlimson kernel: [ 27.701136] PM: Checking swsusp image.Aug 26 10:22:28 Seqlimson kernel: [ 27.701277] PM: Resume from disk failed.Aug 26 10:22:28 Seqlimson kernel: [ 27.728828] kjournald starting. Commit interval 5 secondsAug 26 10:22:28 Seqlimson kernel: [ 27.728834] EXT3-fs: mounted filesystem with ordered data mode.Aug 26 10:22:28 Seqlimson kernel: [ 34.487721] pci_hotplug: PCI Hot Plug PCI Core version: 0.5Aug 26 10:22:28 Seqlimson kernel: [ 34.562857] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4Aug 26 10:22:28 Seqlimson kernel: [ 34.654603] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0Aug 26 10:22:28 Seqlimson kernel: [ 34.654606] e1000e: Copyright (c) 1999-2007 Intel Corporation.Aug 26 10:22:28 Seqlimson kernel: [ 34.654638] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 21 (level, low) -> IRQ 21Aug 26 10:22:28 Seqlimson kernel: [ 34.654647] PCI: Setting latency timer of device 0000:00:19.0 to 64Aug 26 10:22:28 Seqlimson kernel: [ 34.734451] Linux agpgart interface v0.102Aug 26 10:22:28 Seqlimson kernel: [ 34.772564] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:a0:e1:3e:a1Aug 26 10:22:28 Seqlimson kernel: [ 34.772566] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network ConnectionAug 26 10:22:28 Seqlimson kernel: [ 34.772587] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: 1041ff-0ffAug 26 10:22:28 Seqlimson kernel: [ 34.834350] parport_pc 00:06: reported by Plug and Play ACPIAug 26 10:22:28 Seqlimson kernel: [ 34.834400] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]Aug 26 10:22:28 Seqlimson kernel: [ 34.858197] heci: Intel(R) AMT Management Interface - version 3.1.0.31Aug 26 10:22:28 Seqlimson kernel: [ 34.858200] heci: Copyright (c) 2003 - 2007 Intel Corporation.Aug 26 10:22:28 Seqlimson kernel: [ 34.858225] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 26 10:22:28 Seqlimson kernel: [ 34.858230] PCI: Setting latency timer of device 0000:00:03.0 to 64Aug 26 10:22:28 Seqlimson kernel: [ 34.858479] heci: link layer has been established.Aug 26 10:22:28 Seqlimson kernel: [ 34.870204] input: PC Speaker as /devices/platform/pcspkr/input/input4Aug 26 10:22:28 Seqlimson kernel: [ 34.954792] input: Power Button (FF) as /devices/virtual/input/input5Aug 26 10:22:28 Seqlimson kernel: [ 34.977623] heci: heci driver initialization successful.Aug 26 10:22:28 Seqlimson kernel: [ 34.977654] agpgart: Detected an Intel Q35 Chipset.Aug 26 10:22:28 Seqlimson kernel: [ 34.979093] agpgart: Detected 7164K stolen memory.Aug 26 10:22:28 Seqlimson kernel: [ 34.991236] agpgart: AGP aperture is 256M @ 0xd0000000Aug 26 10:22:28 Seqlimson kernel: [ 34.993885] ACPI: Power Button (FF) [PWRF]Aug 26 10:22:28 Seqlimson kernel: [ 34.993933] input: Power Button (CM) as /devices/virtual/input/input6Aug 26 10:22:28 Seqlimson kernel: [ 35.025808] ACPI: Power Button (CM) [VBTN]Aug 26 10:22:28 Seqlimson kernel: [ 35.506396] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)Aug 26 10:22:28 Seqlimson kernel: [ 35.866591] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 26 10:22:28 Seqlimson kernel: [ 35.866604] PCI: Setting latency timer of device 0000:00:1b.0 to 64Aug 26 10:22:28 Seqlimson kernel: [ 36.358580] loop: module loadedAug 26 10:22:28 Seqlimson kernel: [ 36.364575] lp0: using parport0 (interrupt-driven).Aug 26 10:22:28 Seqlimson kernel: [ 36.429995] Adding 1951856k swap on /dev/sda8. Priority:-1 extents:1 across:1951856kAug 26 10:22:28 Seqlimson kernel: [ 36.964952] EXT3 FS on sda7, internal journalAug 26 10:22:28 Seqlimson kernel: [ 37.643153] kjournald starting. Commit interval 5 secondsAug 26 10:22:28 Seqlimson kernel: [ 37.643269] EXT3 FS on sda6, internal journalAug 26 10:22:28 Seqlimson kernel: [ 37.643273] EXT3-fs: mounted filesystem with ordered data mode.Aug 26 10:22:28 Seqlimson kernel: [ 38.005184] ip_tables: (C) 2000-2006 Netfilter Core TeamAug 26 10:22:28 Seqlimson kernel: [ 38.405086] No dock devices found.Aug 26 10:22:28 Seqlimson kernel: [ 38.411462] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: found ejectable bayAug 26 10:22:28 Seqlimson kernel: [ 38.411465] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: Adding notify handlerAug 26 10:22:28 Seqlimson kernel: [ 38.411487] ACPI: Error installing bay notify handlerAug 26 10:22:28 Seqlimson kernel: [ 38.411489] ACPI: Bay [\_SB_.PCI0.IDE1.PRI1.MAS1] AddedAug 26 10:22:29 Seqlimson kernel: [ 39.493726] NET: Registered protocol family 10Aug 26 10:22:29 Seqlimson kernel: [ 39.493882] lo: Disabled Privacy ExtensionsAug 26 10:22:29 Seqlimson kernel: [ 39.652876] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)Aug 26 10:22:29 Seqlimson kernel: [ 39.652879] apm: disabled - APM is not SMP safe.Aug 26 10:22:29 Seqlimson kernel: [ 39.760378] ppdev: user-space parallel port driverAug 26 10:22:29 Seqlimson kernel: [ 39.957692] audit(1219726349.664:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4988 profile="/usr/sbin/cupsd" namespace="default"Aug 26 10:22:31 Seqlimson kernel: [ 41.884339] ADDRCONF(NETDEV_UP): eth0: link is not readyAug 26 10:22:31 Seqlimson kernel: [ 41.894843] Bluetooth: Core ver 2.11Aug 26 10:22:31 Seqlimson kernel: [ 41.894907] NET: Registered protocol family 31Aug 26 10:22:31 Seqlimson kernel: [ 41.894909] Bluetooth: HCI device and connection manager initializedAug 26 10:22:31 Seqlimson kernel: [ 41.894912] Bluetooth: HCI socket layer initializedAug 26 10:22:31 Seqlimson kernel: [ 41.929474] Bluetooth: L2CAP ver 2.9Aug 26 10:22:31 Seqlimson kernel: [ 41.929478] Bluetooth: L2CAP socket layer initializedAug 26 10:22:31 Seqlimson kernel: [ 42.009415] Bluetooth: RFCOMM socket layer initializedAug 26 10:22:31 Seqlimson kernel: [ 42.009423] Bluetooth: RFCOMM TTY layer initializedAug 26 10:22:31 Seqlimson kernel: [ 42.009425] Bluetooth: RFCOMM ver 1.8Aug 26 10:22:34 Seqlimson kernel: [ 44.637405] [drm] Initialized drm 1.1.0 20060810Aug 26 10:22:34 Seqlimson kernel: [ 44.653914] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16Aug 26 10:22:34 Seqlimson kernel: [ 44.653921] PCI: Setting latency timer of device 0000:00:02.0 to 64Aug 26 10:22:34 Seqlimson kernel: [ 44.653963] [drm] Initialized i915 1.6.0 20060119 on minor 0Aug 26 10:22:34 Seqlimson kernel: [ 44.669251] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combiningAug 26 10:22:34 Seqlimson kernel: [ 44.864431] 0000:00:19.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RXAug 26 10:22:34 Seqlimson kernel: [ 44.865796] ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyAug 26 10:22:34 Seqlimson kernel: [ 45.066119] set status page addr 0x00033000Aug 26 10:22:36 Seqlimson kernel: [ 47.031359] NET: Registered protocol family 17Aug 26 10:22:45 Seqlimson kernel: [ 55.751927] eth0: no IPv6 routers presentAug 26 10:23:15 Seqlimson kernel: [ 93.507346] eth0: no IPv6 routers presentxorgConf:# xorg.conf (X.Org X Window System server configuration file)## This file was generated by dexconf, the Debian X Configuration tool, using# values from the debconf database.## Edit this file with caution, and see the xorg.conf manual page.# (Type "man xorg.conf" at the shell prompt.)## This file is automatically updated on xserver-xorg package upgrades *only*# if it has not been modified since the last upgrade of the xserver-xorg# package.## If you have edited this file but would like it to be automatically updated# again, run the following command:# sudo dpkg-reconfigure -phigh xserver-xorgSection "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us"EndSectionSection "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer"EndSectionSection "Device" Identifier "Configured Video Device"EndSectionSection "Monitor" Identifier "Configured Monitor"EndSectionSection "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device"EndSectionSection "ServerLayout" Identifier "Default Layout" Screen "Default Screen"EndSectionlspci:00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)00:01.0 PCI bridge: Intel Corporation 82Q35 Express PCI Express Root Port (rev 02)00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)00:02.1 Display controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02)00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT Controller (rev 02)00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface Controller (rev 02)00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)